Hi there !
I’ve got the LI-JTX1-MIPI-ADPT board with IMX265 camera connected. Currently I didn’t even make the TCA9546 work properly, because of the device tree configuration and problem with understanding all the dependencies of the mux->node->sensor relationships. I saw related topics but all the attached files were deleted, which is why I don’t have even an initial “template” to configure the board. Help me pheese :)
@SimonZhu
Could you help for the sensor driver on TX2.
Thaniks
@svit.eagle
Here is the TX2 driver guide for LI-IMX265-MIPI camera.
Thank you ! Now it works… somehow. The problem is the image is too bluish/purple. Have tried to play with registers but there is no documentation for most of those that are defined for the driver initialization. Any ideas ?
@svit.eagle
Please provide the order information (order# or receipt ) to support@leopardimaging.com . Our team will check the camera version.
