# TX2 HDMI NOT DISPLAY **URL:** \ **Category:** Jetson TX2\ **Created:** [October 31, 2018, 1:59am UTC](https://forums.developer.nvidia.com/t/tx2-hdmi-not-display/66823 "2018-10-31T01:59:59Z")\ **Posts on this page:** 13\ **Page:** 1
**Author:** ![wawxh1101](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@wawxh1101](https://forums.developer.nvidia.com/u/wawxh1101)\ **Post date:** [October 31, 2018, 1:59am UTC](https://forums.developer.nvidia.com/t/tx2-hdmi-not-display/66823/1 "2018-10-31T01:59:59Z")
I used JetPack3.3 on my board,but can’t display; I found that the log on the development board more lines, as follows: [0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait console=tty S0,115200n8 console=tty0 OS=l4t fbcon=map:0 net.ifnames=0 memtype=0 video=tegra fb no\_console\_suspend=1 earlycon=uart8250,mmio32,0x03100000 nvdumper\_reserved=0 x2772e0000 gpt tegra\_fbmem2=0x800000@0x969ee000 lut\_mem2=0x2008@0x969eb000 tegr aid=18.1.2.0.0 tegra\_keep\_boot\_clocks maxcpus=6 boot.slot\_suffix= boot.ratchetv alues=0.2.1 androidboot.serialno=0324817094137 bl\_prof\_dataptr=0x10000@0x277040 000 sdhci\_tegra.en\_boot\_part\_access=1 root=/dev/mmcblk0p1 rw rootwait rootfstyp e=ext4 [0.209125] platform 15210000.nvdisplay: IOVA linear map 0x00000000969ee000(800000) [0.209146] platform 15210000.nvdisplay: IOVA linear map 0x00000000969eb000(3000) But,Don’t the log on my board.I feel no mapping,but I don’t know why? I joined in the uboot command line parameters: fbmem2=0x800000@0x969ee000 lut\_mem2=0x2008@0x969eb000 BUt,Into the kernel,This parameter was done not have on my board. I used JetPack3.0 on my board,HDMI display is normal.Is JetPack3.0 and JetPack3.3 in HDMI implementation mechanism not the same? How should I solve it? Thank you! ---
**Author:** ![WayneWWW](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/waynewww/32/14043_2.png) [@WayneWWW](https://forums.developer.nvidia.com/u/WayneWWW)\ **Post date:** [November 1, 2018, 8:12am UTC](https://forums.developer.nvidia.com/t/tx2-hdmi-not-display/66823/2 "2018-11-01T08:12:04Z")
wawxh1101, Please share full log of your dmesg of Jetpack3.0 and Jetpack3.3. ---
**Author:** ![wawxh1101](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@wawxh1101](https://forums.developer.nvidia.com/u/wawxh1101)\ **Post date:** [November 1, 2018, 9:47am UTC](https://forums.developer.nvidia.com/t/tx2-hdmi-not-display/66823/3 "2018-11-01T09:47:32Z")
JetPack3.0 log: [0.000000] Booting Linux on physical CPU 0x100 [0.000000] Initializing cgroup subsys cpuset [0.000000] Initializing cgroup subsys cpu [0.000000] Initializing cgroup subsys cpuacct [0.000000] Linux version 4.4.15-tegra (buildbrain@mobile-u64-1423) (gcc ver sion 4.8.5 (GCC) ) #1 SMP PREEMPT Wed Mar 1 21:09:29 PST 2017 [0.000000] Boot CPU: AArch64 Processor [411fd073] [0.000000] earlycon: Early serial console at MMIO32 0x3100000 (options ‘’) [0.000000] bootconsole [uart0] enabled [0.000000] Reserved memory: initialized node ramoops\_carveout, compatible i d nvidia,ramoops [0.000000] cma: Reserved 64 MiB at 0x00000000f2000000 [0.000000] psci: probing for conduit method from DT. [0.000000] psci: PSCIv1.0 detected in firmware. [0.000000] psci: Using standard PSCI v0.2 function IDs [0.000000] psci: MIGRATE\_INFO\_TYPE not supported. [0.000000] PERCPU: Embedded 17 pages/cpu @ffffffc1ffdf9000 s31104 r8192 d30 336 u69632 [0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pa ges: 2019520 [0.000000] Kernel command line: fbcon=map:0 net.ifnames=0 console=tty0 OS=l 4t console=ttyS0,115200n8 memtype=0 video=tegrafb no\_console\_suspend=1 earlycon =uart8250,mmio32,0x03100000 gpt tegraid=18.1.2.0.0 tegra\_keep\_boot\_clocks maxcp us=6 android.kerneltype=normal androidboot.serialno=0335115020673 vpr\_resize ro ot=/dev/mmcblk0p1 rw rootwait [0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 byt es) [0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes ) [0.000000] Memory: 7969692K/8206336K available (10164K kernel code, 1653K r wdata, 5424K rodata, 1132K init, 679K bss, 171108K reserved, 65536K cma-reserve d) [0.000000] Virtual kernel memory layout: [0.000000] vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000 ( 246 GB) [0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum) [0.000000] 0xffffffbdc2000000 - 0xffffffbdca000000 ( 128 MB actual) [0.000000] fixed : 0xffffffbffa7fd000 - 0xffffffbffac00000 ( 4108 KB) [0.000000] PCI I/O : 0xffffffbffae00000 - 0xffffffbffbe00000 ( 16 MB) [0.000000] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB) [0.000000] memory : 0xffffffc000000000 - 0xffffffc200000000 ( 8192 MB) [0.000000] .init : 0xffffffc000fba000 - 0xffffffc0010d5000 ( 1132 KB) [0.000000] .text : 0xffffffc000080000 - 0xffffffc000fba000 ( 15592 KB) [0.000000] .data : 0xffffffc0010f4000 - 0xffffffc0012915b0 ( 1654 KB) [0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [0.000000] Preemptible hierarchical RCU implementation. [0.000000] Build-time adjustment of leaf fanout to 64. [0.000000] RCU restricting CPUs from NR\_CPUS=64 to nr\_cpu\_ids=6. [0.000000] RCU: Adjusting geometry for rcu\_fanout\_leaf=64, nr\_cpu\_ids=6 [0.000000] NR\_IRQS:64 nr\_irqs:64 0 [0.000000] GIC: Using split EOI/Deactivate mode [0.000000] Architected cp15 timer(s) running at 31.25MHz (phys). [0.000000] clocksource: arch\_sys\_counter: mask: 0xffffffffffffff max\_cycles : 0xe6a171046, max\_idle\_ns: 881590405314 ns [0.000002] sched\_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398 046511088ns [0.008884] tegra-id: chipid=21817. [0.012715] tegra-id: opt\_subrevision=1. [0.017532] Console: colour dummy device 80x25 [0.022466] console [tty0] enabled [0.026000] kmemleak: Kernel memory leak detector disabled [0.031696] Calibrating delay loop (skipped), value calculated using timer f requency… 62.50 BogoMIPS (lpj=125000) [0.042449] pid\_max: default: 32768 minimum: 301 [0.047274] Security Framework initialized [0.051548] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [0.058689] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 byt es) [0.066623] Initializing cgroup subsys freezer [0.071247] Initializing cgroup subsys debug [0.075806] CPU0 ipc=752 [0.078446] CPU1 ipc=1024 [0.081168] CPU2 ipc=1024 [0.083884] CPU3 ipc=752 [0.086517] CPU4 ipc=752 [0.089149] CPU5 ipc=752 [0.091804] ASID allocator initialised with 65536 entries [0.133969] CPU1: Booted secondary processor [4e0f0030] [0.145578] CPU2: Booted secondary processor [4e0f0030] [0.157390] CPU3: Booted secondary processor [411fd073] [0.169378] CPU4: Booted secondary processor [411fd073] [0.181379] CPU5: Booted secondary processor [411fd073] [0.181418] Brought up 6 CPUs [0.211625] SMP: Total of 6 processors activated. [0.216512] CPU: All CPU(s) started at EL2 [0.221135] devtmpfs: initialized [0.247762] Initilizing CustomIPI irq domain [0.252447] clocksource: jiffies: mask: 0xffffffff max\_cycles: 0xffffffff, m ax\_idle\_ns: 7645041785100000 ns [0.264919] pinctrl core: initialized pinctrl subsystem [0.270691] OS set in device tree is L4T. [0.275370] regulator-dummy: no parameters [0.280272] Initializing plugin-manager [0.284348] Plugin module not found [0.288364] node /plugin-manager/soc-prod-a02-fragment match with chip-id A0 2P [0.296299] node /plugin-manager/fragement@0 match with odm-data enable-tegr a-wdt [0.304677] node /plugin-manager/fragement@4 match with odm-data enable-tegr a-wdt [0.313224] node /plugin-manager/fragment-sdwake-p3310-1000-300 match with b oard \>=3310-1000-300 [0.322806] node /plugin-manager/fragement-pmon-p3310-1000-300 match with bo ard \>=3310-1000-300 [0.332106] node /plugin-manager/fragement-pmon-p3310-1000-800 match with bo ard \>=3310-1000-800 [0.341338] node /plugin-manager/fragment-devslp@0 match with board \>=3310-1 000-200 [0.349644] node /plugin-manager/fragment-500-pcie-config match with board \> =3310-1000-500 [0.358606] node /plugin-manager/fragment-500-xusb-config match with board \> =3310-1000-500 [0.367464] node /plugin-manager/fragment-500-e3325-pcie match with board \>= 3310-1000-500 [0.376118] node /plugin-manager/fragment-p3310-c00-comm match with board \>= 3310-1000-800 [0.384827] node /plugin-manager/fragment-p3310-c01 match with board \>=3310- 1000-900 [0.393089] node /plugin-manager/fragment-p3310-c03 match with board \>=3310- 1000-B00 [0.402196] node /plugin-manager/fragment-e3326@0 match with board 3326-\* [0.410410] node /plugin-manager/fragment-p3310-c00-camera match with board > =3310-1000-800 > [0.422062] Adding domain adsp-pd to PM domain ape-pd > [0.431574] NET: Registered protocol family 16 > [0.437751] console [pstore-1] enabled > [0.441693] pstore: Registered ramoops as persistent store backend > [0.448155] ramoops: attached 0x200000@0x100000000, ecc: 0/0 > [0.461602] cpuidle: using governor ladder > [0.473595] cpuidle: using governor menu > [0.479432] bpmp: waiting for handshake > [0.483477] bpmp: handshake completed > [0.487349] bpmp: synchronizing channels > [0.491462] bpmp: channels synchronized > [0.495467] bpmp: connect returned 0 > [0.499752] tegra186-pmc device create success > [0.504404] scratch reg offset dts data not present > [0.509605] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl register > ed > [0.517154] PMC: configuring io pad defaults > [0.521648] T186 pmc padctrl driver initialized > [0.526381] ### PMC reset source: Software reset > [0.531195] ### PMC reset level: L1 > [0.534836] ### PMC reset status reg: 0x2d > [0.539778] vdso: 2 pages (1 code @ ffffffc0010f9000, 1 data @ ffffffc0010f8 1. [0.547564] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [0.556178] atomic\_pool\_init():526: DMA: preallocated 1024 KiB pool for atom ic allocations [0.566324] tegra\_powergate\_init: DONE [0.570364] DTS File Name: /dvs/git/dirty/git-master\_linux/kernel/kernel-4.4 /arch/arm64/boot/dts/…/…/…/…/…/…/hardware/nvidia/platform/t18x/quill/kern el-dts/tegra186-quill-p3310-1000-c03-00-base.dts [0.589209] DTB Build time: Mar 1 2017 21:10:33 [0.595428] Tegra reboot handler registered. [0.601306] Registering Tegra186 clocks (this may take a while)…done [0.609865] arm-smmu 12000000.iommu: probing hardware configuration… [0.616683] arm-smmu 12000000.iommu: SMMUv2 with: [0.621624] arm-smmu 12000000.iommu: stage 1 translation [0.627282] arm-smmu 12000000.iommu: stage 2 translation [0.632936] arm-smmu 12000000.iommu: nested translation [0.638503] arm-smmu 12000000.iommu: stream matching with 128 regist er groups, mask 0x7f80 [0.647277] arm-smmu 12000000.iommu: SMMU address space size (0x800000) diff ers from mapped region size (0x1000000)! [0.658277] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 onl y) [0.665208] arm-smmu 12000000.iommu: Stage-1: 39-bit VA → 48-bit IP A [0.672040] arm-smmu 12000000.iommu: Stage-2: 39-bit IPA → 48-bit P A [0.719519] arm-smmu 12000000.iommu: registered 66 master devices [0.729956] iommu: Adding device 3460000.sdhci to group 0 [0.736180] iommu: Adding device 3400000.sdhci to group 1 [0.744489] iommu: Adding device 3507000.ahci-sata to group 2 [0.750881] iommu: Adding device 3160000.i2c to group 3 [0.756683] iommu: Adding device c240000.i2c to group 4 [0.762425] iommu: Adding device 3180000.i2c to group 5 [0.768164] iommu: Adding device 3190000.i2c to group 6 [0.773991] iommu: Adding device 31b0000.i2c to group 7 [0.779748] iommu: Adding device 31c0000.i2c to group 8 [0.785487] iommu: Adding device c250000.i2c to group 9 [0.791229] iommu: Adding device 31e0000.i2c to group 10 [0.798469] iommu: Adding device 3210000.spi to group 11 [0.804338] iommu: Adding device c260000.spi to group 12 [0.810166] iommu: Adding device 3240000.spi to group 13 [0.816420] iommu: Adding device 3100000.serial to group 14 [0.822530] iommu: Adding device 3110000.serial to group 15 [0.828639] iommu: Adding device 3130000.serial to group 16 [0.835469] iommu: Adding device 2490000.ether\_qos to group 17 [0.842002] iommu: Adding device b000000.rtcpu to group 18 [0.848510] Wake73 for irq=42 [0.851900] iommu: Adding device smmu\_test to group 19 [0.857763] mc: mapped MMIO address: 0xffffff8000560000 → 0x2c10000 [0.864413] mc: mapped MMIO address: 0xffffff8000640000 → 0x2c20000 [0.871064] mc: mapped MMIO address: 0xffffff8000660000 → 0x2c30000 [0.877713] mc: mapped MMIO address: 0xffffff8000fa0000 → 0x2c40000 [0.884353] mc: mapped MMIO address: 0xffffff8000fc0000 → 0x2c50000 [0.890998] mc-err: Set intmask: 0xf3140 [0.895276] dram-ecc: DRAM ECC disabled-MC\_ECC\_CONTROL:0x0000000c [0.902163] Wake76 for irq=199 [0.905354] Wake77 for irq=199 [0.908541] Wake78 for irq=199 [0.911728] Wake79 for irq=199 [0.914913] Wake80 for irq=199 [0.918099] Wake81 for irq=199 [0.921284] Wake82 for irq=199 [0.924615] iommu: Adding device 3530000.xhci to group 20 [0.930588] iommu: Adding device 3550000.xudc to group 21 [0.936943] tegra186-aowake c370000.pmc: WAKE\_AOWAKE\_CTRL\_0 = 3 [0.943129] tegra186-aowake c370000.pmc: WAKE\_AOWAKE\_CNTRL\_24(PMU\_INT) = 320 [0.950934] iommu: Adding device 13e10000.host1x to group 22 [0.957097] iommu: Adding device 13e10000.host1x:ctx0 to group 23 [0.963656] iommu: Adding device 13e10000.host1x:ctx1 to group 24 [0.970206] iommu: Adding device 13e10000.host1x:ctx2 to group 25 [0.976757] iommu: Adding device 13e10000.host1x:ctx3 to group 26 [0.983364] iommu: Adding device 13e10000.host1x:ctx4 to group 27 [0.989920] iommu: Adding device 13e10000.host1x:ctx5 to group 28 [0.996488] iommu: Adding device 13e10000.host1x:ctx6 to group 29 [1.003097] iommu: Adding device 13e10000.host1x:ctx7 to group 30 [1.009864] iommu: Adding device 150c0000.nvcsi to group 31 [1.016124] iommu: Adding device 15700000.vi to group 32 [1.021979] iommu: Adding device 15600000.isp to group 33 [1.027923] iommu: Adding device 15210000.nvdisplay to group 34 [1.034300] iommu: Adding device 15340000.vic to group 35 [1.040107] iommu: Adding device 154c0000.nvenc to group 36 [1.046111] iommu: Adding device 15480000.nvdec to group 37 [1.052241] iommu: Adding device 15380000.nvjpg to group 38 [1.058232] iommu: Adding device 15500000.tsec to group 39 [1.064144] iommu: Adding device 15100000.tsecb to group 40 [1.070530] iommu: Adding device 15810000.se to group 41 [1.076300] iommu: Adding device 15820000.se to group 42 [1.082034] iommu: Adding device 15830000.se to group 43 [1.087784] iommu: Adding device 15840000.se to group 44 [1.093816] iommu: Adding device 17000000.gp10b to group 45 [1.100757] tegra-reset 5000000.clock: registered 193 resets. [1.108016] iommu: Adding device d000000.bpmp to group 46 [1.113852] bpmp: ping status is 0 [1.117549] bpmp d000000.bpmp: firmware tag is c11dd04ae487c849cc552f8f702ed 830 [1.127610] iommu: Adding device 2600000.dma to group 47 [1.134245] GPIO line 424 (wifi-enable) hogged as output/high [1.140293] GPIO line 445 (sdmmc-wake-input) hogged as input [1.146239] GPIO line 446 (sdmmc-wake-output) hogged as output/low [1.152813] gpiochip\_add\_data: registered GPIOs 320 to 511 on device: tegra- gpio [1.162338] GPIO line 315 (wifi-wake-ap) hogged as input [1.167988] gpiochip\_add\_data: registered GPIOs 256 to 319 on device: tegra- gpio-aon [1.177003] iommu: Adding device 10003000.pcie-controller to group 48 [1.183978] iommu: Adding device sound to group 49 [1.190552] iommu: Adding device 3510000.hda to group 50 [1.197132] iommu: Adding device adsp\_audio to group 51 [1.203783] iommu: Adding device 2993000.adsp to group 52 [1.214656] iommu: Adding device c160000.aon to group 53 [1.222198] vdd-ac-bat: 5000 mV [1.227274] vdd-1v8-ap: 1800 mV [1.231618] gpio tegra-gpio-aon wake30 for gpio=60(FF:4) [1.237443] gpio tegra-gpio-aon wake69 for gpio=59(FF:3) [1.259883] SCSI subsystem initialized [1.264151] usbcore: registered new interface driver usbfs [1.269943] usbcore: registered new interface driver hub [1.275592] usbcore: registered new device driver usb [1.283967] GPIO line 241 (touch-rail-1) hogged as output/high [1.290314] GPIO line 242 (touch-rail-2) hogged as output/high [1.296494] gpiochip\_add\_data: registered GPIOs 240 to 255 on device: tca953 9 [1.304731] gpiochip\_add\_data: registered GPIOs 224 to 239 on device: tca953 9 [1.312369] tps65132 0-003e: No active discharge gpio for regulator tps65132 -outp [1.320325] tegra-i2c 3160000.i2c: no acknowledge from address 0x3e [1.327424] tegra-i2c 3160000.i2c: no acknowledge from address 0x3e [1.334381] outp: 4000 ↔ 6000 mV [1.338158] tps65132 0-003e: No active discharge gpio for regulator tps65132 -outn [1.346129] tegra-i2c 3160000.i2c: no acknowledge from address 0x3e [1.353222] tegra-i2c 3160000.i2c: no acknowledge from address 0x3e [1.360172] outn: 4000 ↔ 6000 mV [1.374650] media: Linux media interface: v0.10 [1.379459] Linux video capture interface: v2.00 [1.388057] pps\_core: LinuxPPS API ver. 1 registered [1.393251] pps\_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giom etti [giometti@linux.it](mailto:giometti@linux.it) [1.402812] PTP clock support registered [1.408607] Tegra WDT setup timeout = 120 seconds. [1.413636] tegra\_wdt\_t18x 30c0000.watchdog: tegra\_wdt\_t18x\_probe done [1.421843] max77620 4-003c: PMIC Version OTP:0x45 and ES:0x8 [1.429711] GPIO line 221 (spmic\_gpio\_input\_5) hogged as input [1.435957] GPIO line 222 (spmic\_gpio\_input\_6) hogged as input [1.442177] gpiochip\_add\_data: registered GPIOs 216 to 223 on device: max776 20-gpio [1.453750] vddio-ddr: at 1125 mV [1.461596] avdd\_dsi\_csi: 1200 mV [1.469595] vdd-1v8: 1800 mV [1.477597] vdd-3v3-sys: 3300 mV [1.482104] spmic-ldo0: at 1800 mV [1.486482] spmic-ldo1: at 800 mV [1.493598] vddio-3v3: 3300 mV [1.497492] vddio-sdmmc1: 1800 ↔ 3300 mV at 3300 mV [1.505596] vdd-rtc: 1000 mV [1.509452] avdd-ts-hv: 1800 ↔ 3300 mV at 1800 mV [1.517600] spmic-ldo6: at 1500 mV [1.522023] vdd-pex-1v05: 1000 mV [1.526201] dvdd-pex: 1000 mV [1.529770] max77620 4-003c: max77620 probe successful [1.535453] Advanced Linux Sound Architecture Driver Initialized. [1.543303] en-vdd-sd: 3300 mV [1.547078] en-vdd-cam: 1800 mV [1.550922] vdd-hdmi: 5000 mV [1.554366] vdd-usb0-5v: 5000 mV [1.558084] vdd-usb1-5v: 5000 mV [1.565598] en-vdd-ts-1v8: 1800 mV [1.573597] en-vdd-ts-hv-3v3: 3300 mV [1.577948] en-vdd-disp-3v3: 3300 mV [1.582213] en-mdm-pwr-3v7: 3700 mV [1.586380] en-vdd-disp-1v8: 1800 mV [1.590626] en-vdd-cam-hv-2v8: 2800 mV [1.595090] en-vdd-cam-1v2: 1200 mV [1.599255] vdd-fan: 5000 mV [1.602524] vdd-3v3: 3300 mV [1.606174] dis-vdd-1v2: 1200 mV [1.609824] en-vdd-vcm-2v8: 2800 mV [1.613991] vdd-usb2-5v: 5000 mV [1.617624] vdd-sys-bl: 3300 mV [1.621438] en-vdd-sys: 1200 mV [1.625812] gpio tegra-gpio wake53 for gpio=159(X:5) [1.632784] extcon-gpio-states external-connection:extcon@1: Cable state 1 [1.640356] clocksource: Switched to clocksource arch\_sys\_counter [1.676891] nvmap\_heap\_init: nvmap\_heap\_init: created heap block cache [1.683959] nvmap\_page\_pool\_init: Total RAM pages: 2008807 [1.689678] nvmap\_page\_pool\_init: nvmap page pool size: 251100 pages (980 MB ) [1.692018] Wake76 for irq=199 [1.692022] Wake77 for irq=199 [1.692024] Wake78 for irq=199 [1.692025] Wake79 for irq=199 [1.692027] Wake80 for irq=199 [1.692029] Wake81 for irq=199 [1.692031] Wake82 for irq=199 [1.693305] thermal thermal\_zone0: Registering thermal zone thermal\_zone0 fo r type BCPU-therm [1.693535] thermal thermal\_zone1: Registering thermal zone thermal\_zone1 fo r type MCPU-therm [1.693644] thermal thermal\_zone2: Registering thermal zone thermal\_zone2 fo r type GPU-therm [1.693734] thermal thermal\_zone3: Registering thermal zone thermal\_zone3 fo r type PLL-therm [1.694136] thermal thermal\_zone4: Registering thermal zone thermal\_zone4 fo r type AO-therm [1.694269] thermal thermal\_zone5: Registering thermal zone thermal\_zone5 fo r type Tboard\_tegra [1.694398] thermal thermal\_zone6: Registering thermal zone thermal\_zone6 fo r type Tdiode\_tegra [1.694530] thermal thermal\_zone7: Registering thermal zone thermal\_zone7 fo r type PMIC-Die [1.694556] isomgr\_init(): iso emc max clk=1866000KHz [1.694558] isomgr\_init(): max\_iso\_bw=26870400KB [1.694777] tegra186-pmc-iopower pmc-iopower: Rail iopower-sys is having fix ed voltage 1800000 [1.694871] tegra186-pmc-iopower pmc-iopower: Rail iopower-uart is having fi xed voltage 1800000 [1.694931] tegra186-pmc-iopower pmc-iopower: Rail iopower-conn is having fi xed voltage 1800000 [1.694986] tegra186-pmc-iopower pmc-iopower: Rail iopower-edp is having fix ed voltage 1800000 [1.695046] tegra186-pmc-iopower pmc-iopower: Rail iopower-pex-ctrl-audio is having fixed voltage 1800000 [1.695105] tegra186-pmc-iopower pmc-iopower: Rail iopower-ufs is having fix ed voltage 1800000 [1.695174] tegra186-pmc-iopower pmc-iopower: Rail iopower-ddr0 is having fi xed voltage 0 [1.695222] tegra186-pmc-iopower pmc-iopower: Rail iopower-ddr1 is having fi xed voltage 0 [1.695269] tegra186-pmc-iopower pmc-iopower: Rail iopower-csi-dsi is having fixed voltage 1200000 [1.695326] tegra186-pmc-iopower pmc-iopower: Rail iopower-cam is having fix ed voltage 1800000 [1.695389] tegra186-pmc-iopower pmc-iopower: Rail iopower-sdmmc4 is having fixed voltage 1800000 [1.695452] tegra186-pmc-iopower pmc-iopower: Rail iopower-sdmmc1-hv is havi ng voltages: 1800000:3300000 [1.695513] tegra186-pmc-iopower pmc-iopower: Rail iopower-audio-hv is havin g fixed voltage 1800000 [1.695570] tegra186-pmc-iopower pmc-iopower: Rail iopower-dbg is having fix ed voltage 1800000 [1.695660] tegra186-pmc-iopower pmc-iopower: Rail iopower-spi is having fix ed voltage 1800000 [1.695719] tegra186-pmc-iopower pmc-iopower: Rail iopower-ao is having fixe d voltage 1800000 [1.695793] tegra186-pmc-iopower pmc-iopower: Rail iopower-ao-hv is having f ixed voltage 3300000 [1.695857] tegra186-pmc-iopower pmc-iopower: Rail iopower-dmic-hv is having fixed voltage 1800000 [1.695914] tegra186-pmc-iopower pmc-iopower: Rail iopower-sdmmc2-hv is havi ng fixed voltage 3300000 [1.695965] tegra186-pmc-iopower pmc-iopower: Rail iopower-sdmmc3-hv is havi ng voltages: 1800000:3300000 [1.695975] tegra186-pmc-iopower pmc-iopower: NO\_IO\_POWER setting 0x00000000 [1.696230] NET: Registered protocol family 2 [1.696848] TCP established hash table entries: 65536 (order: 7, 524288 byte s) [1.697630] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [1.698893] TCP: Hash tables configured (established 65536 bind 65536) [1.698964] UDP hash table entries: 4096 (order: 5, 131072 bytes) [1.699192] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [1.699497] NET: Registered protocol family 1 [1.699830] RPC: Registered named UNIX socket transport module. [1.699833] RPC: Registered udp transport module. [1.699835] RPC: Registered tcp transport module. [1.699837] RPC: Registered tcp NFSv4.1 backchannel transport module. [1.700009] Unpacking initramfs… [1.873877] Freeing initrd memory: 6104K (ffffffc018000000 - ffffffc0185f600 0) [1.889210] host1x 13e10000.host1x: initialized [1.899471] hw perfevents: enabled with armv8\_pmuv3 PMU driver, 7 counters a vailable [1.900479] futex hash table entries: 2048 (order: 6, 262144 bytes) [1.900608] audit: initializing netlink subsys (disabled) [1.900650] audit: type=2000 audit(1.860:1): initialized [1.908336] io scheduler noop registered (default) [1.913892] Adding domain tsec-pd to PM domain host-pd [1.916488] tsec 15500000.tsec: initialized [1.917786] tsec 15100000.tsecb: initialized [1.918126] Adding domain nvdec-pd to PM domain host-pd [1.919968] nvdec 15480000.nvdec: initialized [1.920641] Adding domain vic03-pd to PM domain host-pd [1.920664] Adding domain msenc-pd to PM domain host-pd [1.920686] Adding domain nvjpg-pd to PM domain host-pd [1.924291] falcon 15340000.vic: initialized [1.925494] falcon 154c0000.nvenc: initialized [1.926693] falcon 15380000.nvjpg: initialized [1.927779] iommu\_context\_dev 13e10000.host1x:ctx0: initialized (streamid=56 ) [1.928679] iommu\_context\_dev 13e10000.host1x:ctx1: initialized (streamid=57 ) [1.929480] iommu\_context\_dev 13e10000.host1x:ctx2: initialized (streamid=58 ) [1.930281] iommu\_context\_dev 13e10000.host1x:ctx3: initialized (streamid=59 ) [1.931075] iommu\_context\_dev 13e10000.host1x:ctx4: initialized (streamid=60 ) [1.931856] iommu\_context\_dev 13e10000.host1x:ctx5: initialized (streamid=61 ) [1.932642] iommu\_context\_dev 13e10000.host1x:ctx6: initialized (streamid=62 ) [1.933414] iommu\_context\_dev 13e10000.host1x:ctx7: initialized (streamid=63 ) [1.934883] tegradc 15210000.nvdisplay: Display dc.15210000 registered with id=0 [1.934890] DC OR NODE connected to /host1x/sor1 [1.934926] tegra\_camera\_platform tegra-camera-platform: tegra\_camera\_probe: camera\_platform\_driver probe [1.934954] parse\_tmds\_config: No tmds-config node [1.935048] misc tegra\_camera\_ctrl: tegra\_camera\_isomgr\_register isp\_iso\_bw= 1250000, vi\_iso\_bw=1500000, max\_bw=1500000 [1.935051] tegradc 15210000.nvdisplay: DT parsed successfully [1.941869] tegra\_nvdisp\_bandwidth\_register\_max\_config: max config iso bw = 16727000 KB/s [1.941871] tegra\_nvdisp\_bandwidth\_register\_max\_config: max config EMC floor = 665600000 Hz [1.941873] tegra\_nvdisp\_bandwidth\_register\_max\_config: max config hubclk = 357620000 Hz [1.941903] tegradc 15210000.nvdisplay: vblank syncpt # 7 for dc 1 [1.941908] tegradc 15210000.nvdisplay: vpulse3 syncpt # 8 for dc 1 [1.943590] tegra-adma 2930000.adma: Tegra ADMA driver register 10 channels [1.944267] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initi alized [1.944569] PD DISP0 index2 UP [1.944677] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [1.944973] PD DISP1 index3 UP [1.945048] PD DISP2 index4 UP [1.947045] console [ttyS0] disabled [1.971731] PD DISP2 index4 DOWN [1.971826] PD DISP1 index3 DOWN [1.971907] PD DISP0 index2 DOWN [1.973513] tegradc 15210000.nvdisplay: probed [2.348925] 3100000.serial: ttyS0 at MMIO 0x3100000 (irq = 36, base\_baud = 2 5500000) is a Tegra [2.349068] nvmap\_background\_zero\_thread: PP zeroing thread starting. [2.362836] Console: switching to colour frame buffer device 240x67 [2.398281] tegradc 15210000.nvdisplay: fb registered [2.398281] tegradc 15210000.nvdisplay: fb registered [2.408654] console [ttyS0] enabled [2.408654] console [ttyS0] enabled [2.408708] gpio tegra-gpio wake21 for gpio=121(P:2) [2.408708] gpio tegra-gpio wake21 for gpio=121(P:2) [2.408745] PD DISP0 index2 UP [2.408745] PD DISP0 index2 UP [2.415802] PD DISP1 index3 UP [2.415802] PD DISP1 index3 UP [2.425959] PD DISP2 index4 UP [2.425959] PD DISP2 index4 UP [2.444731] bootconsole [uart0] disabled [2.444731] bootconsole [uart0] disabled [2.459172] rate get on hub 408000000 [2.459785] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 37, base\_baud = 0) is a TEGRA\_UART [2.459950] serial-tegra 3130000.serial: RX in PIO mode [2.460715] 3130000.serial: ttyTHS3 at MMIO 0x3130000 (irq = 38, base\_baud = 0) is a TEGRA\_UART [2.463254] gpio tegra-gpio-aon wake35 for gpio=16(V:2) [2.463267] nct1008\_nct72 7-004c: find device tree node, parsing dt [2.463269] nct1008\_nct72 7-004c: starting parse dt [2.463331] nct1008\_nct72 7-004c: success parsing dt [2.463431] nct1008\_nct72 7-004c: success in enabling tmp451 VDD rail [2.489601] gk20a 17000000.gp10b: failed to allocate secure buffer -12 [2.498093] tmp451: Enabled overheat logging at 104.00C [2.498183] gpio tegra-gpio-aon wake35 for gpio=16(V:2) [2.498208] nct1008\_nct72 7-004c: nct1008\_probe: initialized [2.500552] THERMAL EST: found 3 subdevs [2.500556] THERMAL EST num\_resources: 0 [2.500558] [THERMAL EST subdev 0] [2.500561] [THERMAL EST subdev 1] [2.500563] [THERMAL EST subdev 2] [2.500770] thermal thermal\_zone8: Registering thermal zone thermal\_zone8 fo r type thermal-fan-est [2.500772] THERMAL EST: thz register success. [2.500866] THERMAL EST: end of probe, return err: 0 [2.501037] tegra\_profiler: Branch: Dev [2.501039] tegra\_profiler: Version: 1.109 [2.501040] tegra\_profiler: Samples version: 37 [2.501041] tegra\_profiler: IO version: 20 [2.501045] armv8\_pmu: imp: 0x41, idcode: 0x1 [2.501047] armv8\_pmu: arch: AA64 PmuV3 ARM CORTEX-A57, type: 5, ver: 0 [2.501049] armv8\_pmu: imp: 0x4e, idcode: 0x1 [2.501051] armv8\_pmu: arch: AA64 PmuV3 NVIDIA (Denver), type: 6, ver: 0 [2.501053] armv8\_pmu: imp: 0x4e, idcode: 0x1 [2.501054] armv8\_pmu: arch: AA64 PmuV3 NVIDIA (Denver), type: 6, ver: 0 [2.501056] armv8\_pmu: imp: 0x41, idcode: 0x1 [2.501058] armv8\_pmu: arch: AA64 PmuV3 ARM CORTEX-A57, type: 5, ver: 0 [2.501060] armv8\_pmu: imp: 0x41, idcode: 0x1 [2.501061] armv8\_pmu: arch: AA64 PmuV3 ARM CORTEX-A57, type: 5, ver: 0 [2.501063] armv8\_pmu: imp: 0x41, idcode: 0x1 [2.501064] armv8\_pmu: arch: AA64 PmuV3 ARM CORTEX-A57, type: 5, ver: 0 [2.501186] tegra\_profiler: auth: init [2.503766] tegra-ahci 3507000.ahci-sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode [2.503773] tegra-ahci 3507000.ahci-sata: flags: 64bit ncq sntf pm led pmp p io slum part deso sadm apst [2.504452] scsi host0: tegra\_ahci [2.504717] scsi host1: tegra\_ahci [2.504833] ata1: SATA max UDMA/133 mmio [mem 0x03507000-0x03508fff] port 0x 100 irq 24 [2.504835] ata2: DUMMY [2.505451] spi-tegra114 3210000.spi: Static pin configuration used [2.505805] spi-tegra114 c260000.spi: Static pin configuration used [2.506112] spi-tegra114 3240000.spi: Static pin configuration used [2.506727] tun: Universal TUN/TAP device driver, 1.6 [2.506728] tun: (C) 1999-2004 Max Krasnyansky [maxk@qualcomm.com](mailto:maxk@qualcomm.com) [2.506827] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [2.506828] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [2.506859] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k [2.506860] igb: Copyright (c) 2007-2014 Intel Corporation. [2.506991] PPP generic driver version 2.4.2 [2.507075] PPP BSD Compression module registered [2.507078] PPP Deflate Compression module registered [2.507087] PPP MPPE Compression module registered [2.507093] NET: Registered protocol family 24 [2.507128] usbcore: registered new interface driver asix [2.507148] usbcore: registered new interface driver ax88179\_178a [2.507168] usbcore: registered new interface driver cdc\_ether [2.507202] usbcore: registered new interface driver smsc95xx [2.507222] usbcore: registered new interface driver net1080 [2.507241] usbcore: registered new interface driver cdc\_subset [2.507260] usbcore: registered new interface driver zaurus [2.507295] usbcore: registered new interface driver cdc\_ncm [2.507587] usbcore: registered new interface driver usb-storage [2.507632] usbcore: registered new interface driver usbserial [2.507652] usbcore: registered new interface driver ftdi\_sio [2.507667] usbserial: USB Serial support registered for FTDI USB Serial Dev ice [2.507685] usbcore: registered new interface driver option [2.507697] usbserial: USB Serial support registered for GSM modem (1-port) [2.507714] usbcore: registered new interface driver pl2303 [2.507727] usbserial: USB Serial support registered for pl2303 [2.507886] tegra-usb-cd usb\_cd: otg phy is not available yet [2.509748] tegra-xudc-new 3550000.xudc: usb2 phy is not available yet [2.641389] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [2.643885] tegra\_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [2.643897] tegra\_rtc c2a0000.rtc: Tegra internal Real Time Clock [2.644048] i2c /dev entries driver [2.644828] [OV5693]: probing v4l2 sensor. [2.824381] ata1: SATA link down (SStatus 0 SControl 300) [3.052631] Parent Clock set for DC plld2 [3.063972] dc clk 148500000 [3.072468] tegradc 15210000.nvdisplay: Link compression not supported by th e panel [3.082039] rate get on compclk 148500000 [3.104064] tegradc 15210000.nvdisplay: Window 3 assigned to head 1 [3.120728] tegradc 15210000.nvdisplay: Window 4 assigned to head 1 [3.137385] tegradc 15210000.nvdisplay: Window 5 assigned to head 1 [3.271021] tegradc 15210000.nvdisplay: vrr\_setup failed [3.428719] gspca\_main: v2.14.0 registered [3.428760] usbcore: registered new interface driver gspca\_zc3xx [3.429047] max77620-power max77620-power: Event recorder REG\_NVERC : 0x0 [3.430660] FAN dev name: pwm-fan [3.430701] FAN:gpio request success. [3.430707] FAN: can’t find tach\_gpio [3.430723] pwm\_fan\_driver pwm-fan: cap state:7, cap pwm:255 [3.430867] pwm\_fan\_driver pwm-fan: unable to request PWM, trying legacy API [3.430871] pwm\_fan\_driver pwm-fan: got pwm for fan [3.430874] pwm\_fan\_driver pwm-fan: tach period: 1000 [3.431156] pwm\_fan\_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, s tate:2 [3.431160] pwm\_fan\_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2 [3.431163] pwm\_fan\_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1 , state:2 [3.431166] pwm\_fan\_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1 , state:2 [3.431169] pwm\_fan\_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1 , state:3 [3.431171] pwm\_fan\_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1 , state:3 [3.431174] pwm\_fan\_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1 , state:3 [3.431177] pwm\_fan\_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1 , state:4 [3.431180] pwm\_fan\_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd= 1, state:4 [3.431183] pwm\_fan\_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd= 1, state:4 [3.431590] device-mapper: uevent: version 1.0.3 [3.431763] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm- [devel@redhat.com](mailto:devel@redhat.com) [3.431963] sdhci: Secure Digital Host Controller Interface driver [3.431964] sdhci: Copyright(c) Pierre Ossman [3.431968] sdhci-pltfm: SDHCI platform and OF driver helper [3.432236] sdhci-tegra 3460000.sdhci: Parent select= pll\_p rate=408000000 [3.432503] sdhci-tegra 3460000.sdhci: Parent select= pll\_c4\_out0 rate=19624 9804 [3.432855] sdhci-tegra 3460000.sdhci: Client registration for eMC Successfu l [3.432924] tegra-se-elp 3ad0000.se\_elp: tegra\_se\_elp\_probe: complete [3.433372] hidraw: raw HID events driver (C) Jiri Kosina [3.434845] sdhci-tegra 3460000.sdhci: voltage switch failed in probe, err: -524 [3.434878] usbcore: registered new interface driver usbhid [3.434879] usbhid: USB HID core driver [3.437149] nvadsp 2993000.adsp: in probe()… [3.438017] nvadsp 2993000.adsp: Registering AMC Error Interrupt [3.438045] nvadsp 2993000.adsp: AMC/ARAM initialized. [3.438166] nvadsp 2993000.adsp: nvadsp\_app\_module\_probe [3.438630] tegra\_central\_actmon d230000.actmon: in probe()… [3.440764] tegra\_central\_actmon d230000.actmon: initialization Completed fo r the device mc\_all [3.441202] kfuse 3830000.kfuse: initialized [3.441514] Denver: backdoor interface is NOT available. [3.442502] coresight-tmc 8030000.etf: TMC initialized [3.442814] coresight-tpiu 8060000.tpiu: TPIU initialized [3.443243] coresight-funnel 9010000.funnel\_bccplex: FUNNEL initialized [3.443603] coresight-funnel 8010000.funnel\_major: FUNNEL initialized [3.443984] coresight-replicator 8040000.replicator: REPLICATOR initialized [3.444544] coresight-etm4x 9840000.ptm: ETM 4.0 initialized [3.445025] coresight-etm4x 9940000.ptm: ETM 4.0 initialized [3.445504] coresight-etm4x 9a40000.ptm: ETM 4.0 initialized [3.445986] coresight-etm4x 9b40000.ptm: ETM 4.0 initialized [3.446009] Module initialized successfully [3.449486] camchar: rtcpu character device driver loaded [3.451250] tegra186-aondbg aondbg: aondbg driver probe() OK [3.451381] register\_ari\_mca\_banks: Registered MCA ROC:IOB [3.451445] register\_ari\_mca\_banks: Registered MCA ROC:CCE [3.452005] \*\*\*\* A57 ECC: Enabled [3.452007] tegra18\_a57\_serr\_init: on CPU 5 a A57 Core [3.452132] parse\_throttle\_dt\_data: Num cap clks = 4 [3.452134] parse\_throttle\_dt\_data: clk=mcpu type=1 [3.452136] parse\_throttle\_dt\_data: clk=bcpu type=2 [3.452141] parse\_throttle\_dt\_data: clk=gpu type=4 [3.452143] parse\_throttle\_dt\_data: clk=emc type=3 [3.452577] tegra\_throttle\_probe: probe successful. #cdevs=4 [3.452766] hw perfevents: enabled with denver15\_uncore\_pmu PMU driver, 3 co unters available [3.453184] Adding domain se-pd to PM domain host-pd [3.454626] tegra-se-nvhost 15810000.se: initialized [3.455023] tegra-se-nvhost 15810000.se: tegra\_se\_probe: complete [3.455316] tegra-se-nvhost 15820000.se: initialized [3.455764] tegra-se-nvhost 15820000.se: tegra\_se\_probe: complete [3.456024] tegra-se-nvhost 15830000.se: initialized [3.456329] tegra-se-nvhost 15830000.se: tegra\_se\_probe: complete [3.456608] tegra-se-nvhost 15840000.se: initialized [3.456998] tegra-se-nvhost 15840000.se: tegra\_se\_probe: complete [3.460841] tegra-gpcdma 2600000.dma: GPC DMA driver register 32 channels [3.463146] cpufreq: platform driver Initialization: pass [3.463381] tegra186-padctl 3520000.pinctrl: padctl mmio start 0x00000000035 20000 end 0x0000000003520fff [3.463385] tegra186-padctl 3520000.pinctrl: ao mmio start 0x000000000354000 0 end 0x0000000003540fff [3.463415] tegra186-padctl 3520000.pinctrl: FUSE\_SKU\_USB\_CALIB\_0 0x2ca895 [3.463417] tegra186-padctl 3520000.pinctrl: FUSE\_USB\_CALIB\_EXT\_0 0x8 [3.464570] tegra186-padctl 3520000.pinctrl: using UTMI port 0 for otg [3.465569] tegra-bpmp-thermal d000000.bpmp:bpmpthermal: zone 0 not supporte d [3.466845] cpuidle: Initializing cpuidle driver init for Denver cluster [3.466972] cpuidle: Initializing cpuidle driver init for A57 cluster [3.468314] tachometer tegra-tachometer: Tachometer driver tegra-tachometer registered [3.468320] Tachometer driver initialized with pulse\_per\_rev: 1 and win\_len: 1 [3.468366] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using AD MA 64-bit with 64 bit addr [3.468515] sdhci-tegra 3440000.sdhci: Parent select= pll\_p rate=408000000 [3.469754] sdhci-tegra 3440000.sdhci: Client registration for eMC Successfu l [3.470171] eqos 2490000.ether\_qos: Setting local MAC: 0 4 4b a7 ca fd [3.470774] libphy: dwc\_phy: probed [3.471688] sdhci-tegra 3440000.sdhci: voltage switch failed in probe, err: -524 [3.472163] tegra210\_adsp\_audio\_platform\_probe: platform probe started [3.472711] pad\_id 28: PMC\_IMPL\_E\_33V\_PWR\_0 = [0x39] [3.472711] tegra210-adsp adsp\_audio: Default param-type to BYTE for mp3-dec 1 [3.472943] tegra210-adsp adsp\_audio: Default param-type to BYTE for spkprot [3.473245] tegra210-adsp adsp\_audio: Default param-type to BYTE for src [3.473503] tegra210-adsp adsp\_audio: Default param-type to BYTE for aac-dec 1 [3.476616] tegra210-adsp adsp\_audio: Default param-type to BYTE for aec [3.476620] tegra210-adsp adsp\_audio: adma channel page address dt entry not found [3.476622] tegra210-adsp adsp\_audio: using adma channel page 0 [3.477616] tegra210\_adsp\_audio\_platform\_probe probe successfull. [3.477616] input: tegra-hda HDMI/DP,pcm=3 as /devices/3510000.hda/sound/car d0/input0 [3.477735] input: tegra-hda HDMI/DP,pcm=7 as /devices/3510000.hda/sound/car d0/input1 [3.486120] OPE platform probe [3.486187] OPE platform probe successful [3.496378] tegra-snd-t186ref-mobile-rt565x sound: Failed to get HP Det GPIO , should be handled by codec [3.504373] mmc1: SDHCI controller on 3440000.sdhci [3440000.sdhci] using AD MA 64-bit with 64 bit addr [3.504630] sdhci-tegra 3400000.sdhci: Got CD GPIO [3.504667] sdhci-tegra 3400000.sdhci: Got WP GPIO [3.504721] sdhci-tegra 3400000.sdhci: Parent select= pll\_p rate=408000000 [3.504787] sdhci-tegra 3400000.sdhci: wakeup init done, cd\_irq: 247 [3.504989] sdhci-tegra 3400000.sdhci: Client registration for eMC Successfu l [3.506743] mmc0: MAN\_BKOPS\_EN bit is not set [3.506808] sdhci-tegra 3400000.sdhci: voltage switch failed in probe, err: -524 [3.513845] mmc0: Skipping tuning since strobe enabled [3.521292] mmc0: periodic cache flush enabled [3.521300] mmc0: new HS400 MMC card at address 0001 [3.521578] mmcblk0: mmc0:0001 032G34 29.1 GiB [3.521711] mmcblk0rpmb: mmc0:0001 032G34 partition 3 4.00 MiB [3.522724] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 [3.533619] pad\_id 28: PMC\_IMPL\_E\_33V\_PWR\_0 = [0x39] [3.533619] gpio tegra-gpio wake18 for gpio=101(M:3) [3.533787] bcm54xx\_low\_power\_mode(): put phy in iddq-lp mode [3.542685] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF1 ↔ ADMAIF1 mappi ng ok [3.542761] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF2 ↔ ADMAIF2 mappi ng ok [3.542827] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF3 ↔ ADMAIF3 mappi ng ok [3.542893] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF4 ↔ ADMAIF4 mappi ng ok [3.542965] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF5 ↔ ADMAIF5 mappi ng ok [3.543031] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF6 ↔ ADMAIF6 mappi ng ok [3.543099] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF7 ↔ ADMAIF7 mappi ng ok [3.543167] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF8 ↔ ADMAIF8 mappi ng ok [3.543233] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF9 ↔ ADMAIF9 mappi ng ok [3.543301] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF10 ↔ ADMAIF10 map ping ok [3.543372] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF11 ↔ ADMAIF11 map ping ok [3.543442] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF12 ↔ ADMAIF12 map ping ok [3.543514] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF13 ↔ ADMAIF13 map ping ok [3.543580] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF14 ↔ ADMAIF14 map ping ok [3.543648] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF15 ↔ ADMAIF15 map ping ok [3.543715] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF16 ↔ ADMAIF16 map ping ok [3.543786] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF17 ↔ ADMAIF17 map ping ok [3.543854] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF18 ↔ ADMAIF18 map ping ok [3.543922] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF19 ↔ ADMAIF19 map ping ok [3.543990] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF20 ↔ ADMAIF20 map ping ok [3.544457] gpio tegra-gpio wake71 for gpio=125(P:6) [3.544487] mmc2: SDHCI controller on 3400000.sdhci [3400000.sdhci] using AD MA 64-bit with 64 bit addr [3.545048] tegra-snd-t186ref-mobile-rt565x sound: ADSP-FE1 ↔ ADSP PCM1 ma pping ok [3.545120] t ---
**Author:** ![wawxh1101](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@wawxh1101](https://forums.developer.nvidia.com/u/wawxh1101)\ **Post date:** [November 1, 2018, 10:07am UTC](https://forums.developer.nvidia.com/t/tx2-hdmi-not-display/66823/4 "2018-11-01T10:07:20Z")
JetPack3.3 [0.000000] Booting Linux on physical CPU 0x100 [0.000000] Initializing cgroup subsys cpuset [0.000000] Initializing cgroup subsys cpu [0.000000] Initializing cgroup subsys cpuacct [0.000000] Linux version 4.4.38-tegra (buildbrain@mobile-u64-773) (gcc vers ion 4.8.5 (GCC) ) #1 SMP PREEMPT Thu May 17 00:15:19 PDT 2018 [0.000000] Boot CPU: AArch64 Processor [411fd073] [0.000000] earlycon: Early serial console at MMIO32 0x3100000 (options ‘’) [0.000000] bootconsole [uart0] enabled [0.000000] Found tegra\_fbmem2: 00800000@969ee000 [0.000000] Found lut\_mem2: 00002008@969eb000 [0.000000] Reserved memory: initialized node ramoops\_carveout, compatible i d nvidia,ramoops [0.000000] cma: Reserved 64 MiB at 0x00000000fc000000 [0.000000] On node 0 totalpages: 2052096 [0.000000] DMA zone: 8192 pages used for memmap [0.000000] DMA zone: 0 pages reserved [0.000000] DMA zone: 519680 pages, LIFO batch:31 [0.000000] Normal zone: 23968 pages used for memmap [0.000000] Normal zone: 1532416 pages, LIFO batch:31 [0.000000] psci: probing for conduit method from DT. [0.000000] psci: PSCIv1.0 detected in firmware. [0.000000] psci: Using standard PSCI v0.2 function IDs [0.000000] psci: MIGRATE\_INFO\_TYPE not supported. [0.000000] PERCPU: Embedded 17 pages/cpu @ffffffc1f5f9a000 s31360 r8192 d30 080 u69632 [0.000000] pcpu-alloc: s31360 r8192 d30080 u69632 alloc=17_4096 [0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pa ges: 2019936 [0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait console=tty S0,115200n8 console=tty0 OS=l4t fbcon=map:0 net.ifnames=0 memtype=0 video=tegra fb no\_console\_suspend=1 earlycon=uart8250,mmio32,0x03100000 nvdumper\_reserved=0 x2772e0000 gpt tegra\_fbmem2=0x800000@0x969ee000 lut\_mem2=0x2008@0x969eb000 tegr aid=18.1.2.0.0 tegra\_keep\_boot\_clocks maxcpus=6 boot.slot\_suffix= boot.ratchetv alues=0.2.1 androidboot.serialno=0324817094137 bl\_prof\_dataptr=0x10000@0x277040 000 sdhci\_tegra.en\_boot\_part\_access=1 root=/dev/mmcblk0p1 rw rootwait rootfstyp e=ext4 [0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 byt es) [0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes ) [0.000000] Memory: 7967768K/8208384K available (11296K kernel code, 1841K r wdata, 5796K rodata, 1168K init, 691K bss, 175080K reserved, 65536K cma-reserve d) [0.000000] Virtual kernel memory layout: vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000 ( 246 GB) vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum) 0xffffffbdc2000000 - 0xffffffbdc9da0000 ( 125 MB actual) fixed : 0xffffffbffa7fd000 - 0xffffffbffac00000 ( 4108 KB) PCI I/O : 0xffffffbffae00000 - 0xffffffbffbe00000 ( 16 MB) modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB) memory : 0xffffffc000000000 - 0xffffffc1f6800000 ( 8040 MB) .init : 0xffffffc001132000 - 0xffffffc001256000 ( 1168 KB) .text : 0xffffffc000080000 - 0xffffffc001132000 ( 17096 KB) .data : 0xffffffc001278000 - 0xffffffc001444730 ( 1842 KB) [0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [0.000000] Preemptible hierarchical RCU implementation. [0.000000] Build-time adjustment of leaf fanout to 64. [0.000000] RCU restricting CPUs from NR\_CPUS=64 to nr\_cpu\_ids=6. [0.000000] RCU: Adjusting geometry for rcu\_fanout\_leaf=64, nr\_cpu\_ids=6 [0.000000] NR\_IRQS:64 nr\_irqs:64 0 [0.000000] GIC: Using split EOI/Deactivate mode [0.000000] Architected cp15 timer(s) running at 31.25MHz (phys). [0.000000] clocksource: arch\_sys\_counter: mask: 0xffffffffffffff max\_cycles : 0xe6a171046, max\_idle\_ns: 881590405314 ns [0.000002] sched\_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398 046511088ns [0.009853] Console: colour dummy device 80x25 [0.014513] console [tty0] enabled [0.018070] bootconsole [uart0] disabled [0.022174] kmemleak: Kernel memory leak detector disabled [0.022186] Calibrating delay loop (skipped), value calculated using timer f requency… 62.50 BogoMIPS (lpj=125000) [0.022198] pid\_max: default: 32768 minimum: 301 [0.022247] Security Framework initialized [0.022285] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [0.022296] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 byt es) [0.022676] Initializing cgroup subsys io [0.022690] Initializing cgroup subsys memory [0.022706] Initializing cgroup subsys devices [0.022715] Initializing cgroup subsys freezer [0.022724] Initializing cgroup subsys net\_cls [0.022734] Initializing cgroup subsys perf\_event [0.022743] Initializing cgroup subsys net\_prio [0.022753] Initializing cgroup subsys pids [0.022762] Initializing cgroup subsys debug [0.022902] CPU0 ipc=752 [0.022911] CPU1 ipc=1024 [0.022919] CPU2 ipc=1024 [0.022928] CPU3 ipc=752 [0.022936] CPU4 ipc=752 [0.022946] CPU5 ipc=752 [0.022982] ASID allocator initialised with 65536 entries [0.046211] tegra-id: chipid=21817. [0.046229] tegra-id: opt\_subrevision=1. [0.046242] Tegra Revision: A02p SKU: 0xdc CPU Process: 0 SoC Process: 0 [0.046935] DTS File Name: /dvs/git/dirty/git-master\_linux/kernel/kernel-4.4 /arch/arm64/boot/dts/…/…/…/…/…/…/hardware/nvidia/platform/t18x/quill/kern el-dts/tegra186-quill-p3310-1000-c03-00-base.dts [0.046960] DTB Build time: May 17 2018 00:17:47 [0.062570] CPU1: Booted secondary processor [4e0f0030] [0.074127] CPU2: Booted secondary processor [4e0f0030] [0.085800] CPU3: Booted secondary processor [411fd073] [0.097815] CPU4: Booted secondary processor [411fd073] [0.109802] CPU5: Booted secondary processor [411fd073] [0.109865] Brought up 6 CPUs [0.109921] SMP: Total of 6 processors activated. [0.109933] CPU: All CPU(s) started at EL2 [0.110353] devtmpfs: initialized [0.137006] Initilizing CustomIPI irq domain [0.137204] clocksource: jiffies: mask: 0xffffffff max\_cycles: 0xffffffff, m ax\_idle\_ns: 7645041785100000 ns [0.137988] pinctrl core: initialized pinctrl subsystem [0.138165] OS set in device tree is not L4T. [0.138356] regulator-dummy: no parameters [0.138461] Initializing plugin-manager [0.138514] Plugin module not found [0.138934] node /plugin-manager/soc-prod-a02-fragment match with chip-id A0 2P [0.139275] node /plugin-manager/fragement@0 match with odm-data enable-denv er-wdt [0.139900] node /plugin-manager/fragement@4 match with odm-data enable-denv er-wdt [0.141089] node /plugin-manager/fragment-sdwake-p3310-1000-300 match with b oard \>=3310-1000-300 [0.141465] node /plugin-manager/fragement-pmon-p3310-1000-300 match with bo ard \>=3310-1000-300 [0.141728] node /plugin-manager/fragement-pmon-p3310-1000-800 match with bo ard \>=3310-1000-800 [0.141952] node /plugin-manager/fragment-devslp@0 match with board \>=3310-1 000-200 [0.142383] node /plugin-manager/fragment-500-pcie-config match with board \> =3310-1000-500 [0.142837] node /plugin-manager/fragment-500-xusb-config match with board \> =3310-1000-500 [0.143118] node /plugin-manager/fragment-500-e3325-pcie match with board \>= 3310-1000-500 [0.143508] node /plugin-manager/fragment-p3310-c00-comm match with board \>= 3310-1000-800 [0.143758] node /plugin-manager/fragment-p3310-c00-pmic match with board \>= 3310-1000-800 [0.143984] node /plugin-manager/fragment-p3310-c01 match with board \>=3310- 1000-900 [0.144246] node /plugin-manager/fragment-p3310-c03 match with board \>=3310- 1000-B00 [0.145857] node /plugin-manager/fragment-e3326@0 match with board 3326-_ [0.146966] node /plugin-manager/fragment-p3310-c00-camera match with board > =3310-1000-800 > [0.148791] Adding domain adsp-pd to PM domain ape-pd > [0.151185] NET: Registered protocol family 16 > [0.152031] console [pstore-1] enabled > [0.152044] pstore: Registered ramoops as persistent store backend > [0.152057] ramoops: attached 0x200000@0x277080000, ecc: 0/0 > [0.161352] cpuidle: using governor ladder > [0.165800] cpuidle: using governor menu > [0.166935] bpmp: waiting for handshake > [0.166950] bpmp: handshake completed > [0.166990] bpmp: synchronizing channels > [0.167019] bpmp: channels synchronized > [0.167030] bpmp: mail init ok > [0.167394] vdso: 2 pages (1 code @ ffffffc00127d000, 1 data @ ffffffc00127c 1. [0.167427] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [0.168370] atomic\_pool\_init():526: DMA: preallocated 1024 KiB pool for atom ic allocations [0.169808] tegra\_powergate\_init: DONE [0.169829] DTS File Name: /dvs/git/dirty/git-master\_linux/kernel/kernel-4.4 /arch/arm64/boot/dts/…/…/…/…/…/…/hardware/nvidia/platform/t18x/quill/kern el-dts/tegra186-quill-p3310-1000-c03-00-base.dts [0.169856] DTB Build time: May 17 2018 00:17:47 [0.170795] Tegra reboot handler registered. [0.171863] Registering Tegra186 clocks (this may take a while)…done [0.174008] arm-smmu 12000000.iommu: probing hardware configuration… [0.174026] arm-smmu 12000000.iommu: SMMUv2 with: [0.174040] arm-smmu 12000000.iommu: stage 1 translation [0.174052] arm-smmu 12000000.iommu: stage 2 translation [0.174064] arm-smmu 12000000.iommu: nested translation [0.174078] arm-smmu 12000000.iommu: stream matching with 128 regist er groups, mask 0x7f80 [0.174097] arm-smmu 12000000.iommu: SMMU address space size (0x800000) diff ers from mapped region size (0x1000000)! [0.174116] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 onl y) [0.174130] arm-smmu 12000000.iommu: Stage-1: 39-bit VA → 48-bit IP A [0.174143] arm-smmu 12000000.iommu: Stage-2: 39-bit IPA → 48-bit P A [0.192687] /iommu@12000000: could not get #stream-id-cells for /pcie-contro ller@10003000 [0.192706] arm-smmu 12000000.iommu: registered 40 master devices [0.195316] iommu: Adding device 3460000.sdhci to group 0 [0.195764] iommu: Adding device 3400000.sdhci to group 1 [0.202174] iommu: Adding device 2490000.ether\_qos to group 2 [0.203396] Wake73 for irq=42 [0.203581] iommu: Adding device smmu\_test to group 3 [0.203961] mc: mapped MMIO address: 0xffffff8000560000 → 0x2c10000 [0.203983] mc: mapped MMIO address: 0xffffff8000640000 → 0x2c20000 [0.204002] mc: mapped MMIO address: 0xffffff8000660000 → 0x2c30000 [0.204021] mc: mapped MMIO address: 0xffffff8000fa0000 → 0x2c40000 [0.204042] mc: mapped MMIO address: 0xffffff8000fc0000 → 0x2c50000 [0.204061] mc-err: Set intmask: 0xf3140 [0.204204] ecc-err: dram ecc disabled-MC\_ECC\_CONTROL:0x0000000c [0.204804] Wake76 for irq=199 [0.204817] Wake77 for irq=199 [0.204827] Wake78 for irq=199 [0.204837] Wake79 for irq=199 [0.204846] Wake80 for irq=199 [0.204856] Wake81 for irq=199 [0.204865] Wake82 for irq=199 [0.204933] iommu: Adding device 3530000.xhci to group 4 [0.205197] iommu: Adding device 3550000.xudc to group 5 [0.205710] tegra-pmc c360000.pmc: scratch reg offset dts data not present [0.205726] tegra-pmc: ### PMC reset source: Power on reset [0.205738] tegra-pmc: ### PMC reset level: L0 [0.205748] tegra-pmc: ### PMC reset status reg: 0x0 [0.205905] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl register ed [0.205925] tegra-pmc c360000.pmc: IO padctrl driver initialized [0.206025] tegra186-aowake c370000.pmc: WAKE\_AOWAKE\_CTRL\_0 = 3 [0.206041] tegra186-aowake c370000.pmc: WAKE\_AOWAKE\_CNTRL\_24(PMU\_INT) = 320 [0.206364] iommu: Adding device 13e10000.host1x to group 6 [0.206508] iommu: Adding device 13e10000.host1x:ctx0 to group 7 [0.206667] iommu: Adding device 13e10000.host1x:ctx1 to group 8 [0.206813] iommu: Adding device 13e10000.host1x:ctx2 to group 9 [0.206959] iommu: Adding device 13e10000.host1x:ctx3 to group 10 [0.207112] iommu: Adding device 13e10000.host1x:ctx4 to group 11 [0.207257] iommu: Adding device 13e10000.host1x:ctx5 to group 12 [0.207405] iommu: Adding device 13e10000.host1x:ctx6 to group 13 [0.207558] iommu: Adding device 13e10000.host1x:ctx7 to group 14 [0.207862] iommu: Adding device 150c0000.nvcsi to group 15 [0.208270] iommu: Adding device 15700000.vi to group 16 [0.208498] iommu: Adding device 15600000.isp to group 17 [0.208727] iommu: Adding device 15210000.nvdisplay to group 18 [0.208806] platform 15210000.nvdisplay: IOVA linear map 0x00000000969ee000( 800000) [0.208827] platform 15210000.nvdisplay: IOVA linear map 0x00000000969eb000( 3000) [0.208943] iommu: Adding device 15340000.vic to group 19 [0.209081] iommu: Adding device 154c0000.nvenc to group 20 [0.209206] iommu: Adding device 15480000.nvdec to group 21 [0.209449] iommu: Adding device 15380000.nvjpg to group 22 [0.209577] iommu: Adding device 15500000.tsec to group 23 [0.209708] iommu: Adding device 15100000.tsecb to group 24 [0.210227] iommu: Adding device 15810000.se to group 25 [0.210357] iommu: Adding device 15820000.se to group 26 [0.210489] iommu: Adding device 15830000.se to group 27 [0.210760] iommu: Adding device 15840000.se to group 28 [0.211991] iommu: Adding device 17000000.gp10b to group 29 [0.214845] tegra-reset 5000000.clock: registered 193 resets. [0.217659] bpmp: ping status is 0 [0.217954] arm-smmu 12000000.iommu: Unexpected {global,context} fault, this could be serious [0.217979] arm-smmu 12000000.iommu: GFSR 0x80000002, GFSYNR0 0x0000 0000, GFSYNR1 0x00001432, GFSYNR2 0x00000000 [0.218046] bpmp d000000.bpmp: firmware tag is [0.218097] (255) csw\_bpmpw: MC request violates VPR requirements [0.218111] status = 0x00337094; addr = 0x3ffffffc0 [0.218144] secure: yes, access-type: write [0.218159] unknown mcerr fault, int\_status=0x00000000, ch\_int\_status=0x0000 0000, hubc\_int\_status=0x00000000 [0.218186] unknown mcerr fault, int\_status=0x00000000, ch\_int\_status=0x0000 0000, hubc\_int\_status=0x00000000 [0.218196] unknown mcerr fault, int\_status=0x00000000, ch\_int\_status=0x0000 0000, hubc\_int\_status=0x00000000 [0.218206] mc-err: Too many MC errors; throttling prints [0.218697] bpmp d000000.bpmp: probe ok [0.222631] GPIO line 461 (cam0-rst) hogged as output/low [0.222691] GPIO line 456 (cam0-pwdn) hogged as output/low [0.222760] GPIO line 457 (cam1-rst) hogged as output/low [0.222807] GPIO line 426 (cam1-pwdn) hogged as output/low [0.222866] GPIO line 424 (wifi-enable) hogged as output/high [0.222915] GPIO line 445 (sdmmc-wake-input) hogged as input [0.222965] GPIO line 446 (sdmmc-wake-output) hogged as output/low [0.223089] gpiochip\_add\_data: registered GPIOs 320 to 511 on device: tegra- gpio [0.224949] GPIO line 315 (wifi-wake-ap) hogged as input [0.225048] gpiochip\_add\_data: registered GPIOs 256 to 319 on device: tegra- gpio-aon [0.226084] iommu: Adding device sound to group 30 [0.227939] iommu: Adding device 3510000.hda to group 31 [0.229106] iommu: Adding device adsp\_audio to group 32 [0.230578] iommu: Adding device 2993000.adsp to group 33 [0.240353] vdd-ac-bat: 5000 mV [0.243111] vdd-1v8-ap: 1800 mV [0.260758] SCSI subsystem initialized [0.260979] libata version 3.00 loaded. [0.261156] usbcore: registered new interface driver usbfs [0.261219] usbcore: registered new interface driver hub [0.261343] usbcore: registered new device driver usb [0.265497] GPIO line 241 (touch-rail-1) hogged as output/high [0.265951] GPIO line 242 (touch-rail-2) hogged as output/high [0.266067] gpiochip\_add\_data: registered GPIOs 240 to 255 on device: tca953 9 [0.267509] GPIO line 228 (lcd-bias-en-rail) hogged as output/high [0.267633] gpiochip\_add\_data: registered GPIOs 224 to 239 on device: tca953 9 [0.278585] media: Linux media interface: v0.10 [0.278693] Linux video capture interface: v2.00 [0.281784] pps\_core: LinuxPPS API ver. 1 registered [0.281824] pps\_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giom etti [giometti@linux.it](mailto:giometti@linux.it) [0.281883] PTP clock support registered [0.282914] tegra\_wdt\_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 se c [0.282990] tegra\_wdt\_t18x 30c0000.watchdog: Registered successfully [0.284565] max77620 4-003c: PMIC Version OTP:0x45 and ES:0x8 [0.286629] GPIO line 221 (spmic\_gpio\_input\_5) hogged as input [0.286852] GPIO line 222 (spmic\_gpio\_input\_6) hogged as input [0.286971] gpiochip\_add\_data: registered GPIOs 216 to 223 on device: max776 20-gpio [0.294752] vddio-ddr: at 1125 mV [0.298585] avdd\_dsi\_csi: 1200 mV [0.302598] vdd-1v8: 1800 mV [0.306592] vdd-3v3-sys: 3300 mV [0.307725] spmic-ldo0: at 1800 mV [0.308576] spmic-ldo1: at 800 mV [0.314582] vddio-3v3: 3300 mV [0.315215] vddio-sdmmc1: 1800 ↔ 3300 mV at 3300 mV [0.317349] vdd-rtc: at 800 mV [0.318044] avdd-ts-hv: 1800 ↔ 3300 mV at 1800 mV [0.321348] spmic-ldo6: at 1500 mV [0.325347] vdd-pex-1v05: 1000 mV [0.325894] dvdd-pex: 1000 mV [0.326148] max77620 4-003c: max77620 probe successful [0.326403] Advanced Linux Sound Architecture Driver Initialized. [0.327356] en-vdd-sd: 3300 mV [0.327954] en-vdd-cam: 1800 mV [0.329803] vdd-hdmi: 5000 mV [0.329985] vdd-usb0-5v: 5000 mV [0.330155] vdd-usb1-5v: 5000 mV [0.333803] en-vdd-ts-1v8: 1800 mV [0.337802] en-vdd-ts-hv-3v3: 3300 mV [0.338321] en-vdd-disp-3v3: 3300 mV [0.338830] en-mdm-pwr-3v7: 3700 mV [0.339346] en-vdd-disp-1v8: 1800 mV [0.339881] en-vdd-cam-hv-2v8: 2800 mV [0.340405] en-vdd-cam-1v2: 1200 mV [0.340930] vdd-fan: 5000 mV [0.341041] vdd-3v3: 3300 mV [0.341771] dis-vdd-1v2: 1200 mV [0.341893] en-vdd-vcm-2v8: 2800 mV [0.342429] vdd-usb2-5v: 5000 mV [0.342539] vdd-sys-bl: 3300 mV [0.343067] en-vdd-sys: 1200 mV [0.346429] extcon-gpio-states external-connection:extcon@1: Cable state 0 [0.346850] clocksource: Switched to clocksource arch\_sys\_counter [0.365072] nvmap\_heap\_init: nvmap\_heap\_init: created heap block cache [0.365355] nvmap: nvmap\_override\_cache\_ops() set roc flush ops to replace c ache ops by set/ways [0.365848] nvmap\_page\_pool\_init: Total RAM pages: 2008326 [0.365866] nvmap\_page\_pool\_init: nvmap page pool size: 251040 pages (980 MB ) [0.366098] nvmap\_background\_zero\_thread: PP zeroing thread starting. [0.370553] Wake76 for irq=199 [0.370567] Wake77 for irq=199 [0.370578] Wake78 for irq=199 [0.370589] Wake79 for irq=199 [0.370599] Wake80 for irq=199 [0.370609] Wake81 for irq=199 [0.370618] Wake82 for irq=199 [0.371388] thermal thermal\_zone0: Registering thermal zone thermal\_zone0 fo r type BCPU-therm [0.371583] thermal thermal\_zone1: Registering thermal zone thermal\_zone1 fo r type MCPU-therm [0.371973] thermal thermal\_zone2: Registering thermal zone thermal\_zone2 fo r type GPU-therm [0.372052] thermal thermal\_zone3: Registering thermal zone thermal\_zone3 fo r type PLL-therm [0.372197] thermal thermal\_zone4: Registering thermal zone thermal\_zone4 fo r type Tboard\_tegra [0.372340] thermal thermal\_zone5: Registering thermal zone thermal\_zone5 fo r type Tdiode\_tegra [0.372487] thermal thermal\_zone6: Registering thermal zone thermal\_zone6 fo r type PMIC-Die [0.372778] isomgr\_init(): iso emc max clk=1866000KHz [0.372791] isomgr\_init(): max\_iso\_bw=26870400KB [0.372875] NET: Registered protocol family 2 [0.373185] TCP established hash table entries: 65536 (order: 7, 524288 byte s) [0.373415] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [0.373714] TCP: Hash tables configured (established 65536 bind 65536) [0.373772] UDP hash table entries: 4096 (order: 5, 131072 bytes) [0.373826] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [0.373994] NET: Registered protocol family 1 [0.374192] RPC: Registered named UNIX socket transport module. [0.374208] RPC: Registered udp transport module. [0.374220] RPC: Registered tcp transport module. [0.374231] RPC: Registered tcp NFSv4.1 backchannel transport module. [0.374252] PCI: CLS 0 bytes, default 128 [0.374347] Trying to unpack rootfs image as initramfs… [0.388061] host1x 13e10000.host1x: initialized [0.388915] hw perfevents: enabled with armv8\_pmuv3 PMU driver, 7 counters a vailable [0.390786] futex hash table entries: 2048 (order: 6, 262144 bytes) [0.390947] audit: initializing netlink subsys (disabled) [0.390980] audit: type=2000 audit(0.380:1): initialized [0.397778] io scheduler noop registered [0.397886] io scheduler cfq registered (default) [0.400766] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [0.401934] tegra-pwm 3290000.pwm: PWM clk can sleep in ops [0.402994] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [0.404039] tegra-pwm c340000.pwm: PWM clk can sleep in ops [0.407487] tsec 15500000.tsec: initialized [0.408609] tsec 15100000.tsecb: initialized [0.410930] nvdec 15480000.nvdec: initialized [0.414550] falcon 15340000.vic: initialized [0.415548] falcon 154c0000.nvenc: initialized [0.416532] falcon 15380000.nvjpg: initialized [0.417287] iommu\_context\_dev 13e10000.host1x:ctx0: initialized (streamid=56 ) [0.417786] iommu\_context\_dev 13e10000.host1x:ctx1: initialized (streamid=57 ) [0.418278] iommu\_context\_dev 13e10000.host1x:ctx2: initialized (streamid=58 ) [0.418772] iommu\_context\_dev 13e10000.host1x:ctx3: initialized (streamid=59 ) [0.419284] iommu\_context\_dev 13e10000.host1x:ctx4: initialized (streamid=60 ) [0.419782] iommu\_context\_dev 13e10000.host1x:ctx5: initialized (streamid=61 ) [0.420273] iommu\_context\_dev 13e10000.host1x:ctx6: initialized (streamid=62 ) [0.420762] iommu\_context\_dev 13e10000.host1x:ctx7: initialized (streamid=63 ) [0.423332] DC OR NODE connected to /host1x/sor1 [0.423457] generic\_infoframe\_type: 0x87 [0.423468] tegra\_camera\_platform tegra-camera-platform: tegra\_camera\_probe: camera\_platform\_driver probe [0.423562] misc tegra\_camera\_ctrl: tegra\_camera\_isomgr\_register tpg\_max\_iso = 3916800KBs [0.423577] tegradc 15210000.nvdisplay: DT parsed successfully [0.423593] misc tegra\_camera\_ctrl: tegra\_camera\_isomgr\_register isp\_iso\_bw= 4687500, vi\_iso\_bw=1500000, max\_bw=4687500 [0.423609] tegradc 15210000.nvdisplay: Display dc.ffffff8002320000 register ed with id=0 [0.431174] tegra\_nvdisp\_bandwidth\_register\_max\_config: max config iso bw = 16727000 KB/s [0.431196] tegra\_nvdisp\_bandwidth\_register\_max\_config: max config EMC floor = 665600000 Hz [0.431213] tegra\_nvdisp\_bandwidth\_register\_max\_config: max config hubclk = 357620000 Hz [0.431261] tegradc 15210000.nvdisplay: vblank syncpt # 7 for dc 1 [0.431277] tegradc 15210000.nvdisplay: vpulse3 syncpt # 8 for dc 1 [0.431505] tegra-adma 2930000.adma: Tegra ADMA driver register 10 channels [0.431673] hdmi: couldn’t get regulator vdd\_hdmi\_5v0: -517 [0.432173] tegradc 15210000.nvdisplay: Bootloader disp\_param detected. Dete cted mode: 1920x1080 (on 0x0mm) pclk=148350937 [0.433941] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initi alized [0.434275] kfuse 3830000.kfuse: initialized [0.434282] tegradc 15210000.nvdisplay: hdmi: no prod\_list\_hdmi\_board, use d efault range [0.435654] tegradc 15210000.nvdisplay: probed [0.436104] tegra-pmc-iopower pmc-iopower: NO\_IOPOWER setting 0x0 [0.436567] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [0.438477] console [ttyS0] disabled [0.438530] 3100000.serial: ttyS0 at MMIO 0x3100000 (irq = 37, base\_baud = 2 5500000) is a Tegra [2.531569] console [ttyS0] enabled [2.533744] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 38, base\_baud = 0) is a TEGRA\_UART [2.534887] c280000.serial: ttyTHS2 at MMIO 0xc280000 (irq = 39, base\_baud = 0) is a TEGRA\_UART [2.535129] serial-tegra 3130000.serial: RX in PIO mode [2.536132] 3130000.serial: ttyTHS3 at MMIO 0x3130000 (irq = 40, base\_baud = 0) is a TEGRA\_UART [2.546427] Console: switching to colour frame buffer device 240x67 [2.547895] brd: module loaded [2.553004] loop: module loaded [2.553234] nct1008\_nct72 7-004c: find device tree node, parsing dt [2.553238] nct1008\_nct72 7-004c: starting parse dt [2.553319] nct1008\_nct72 7-004c: success parsing dt [2.553440] nct1008\_nct72 7-004c: success in enabling tmp451 VDD rail [2.620405] tmp451: Enabled overheat logging at 104.00C [2.620492] nct1008\_nct72 7-004c: nct1008\_probe: initialized [2.622555] THERMAL EST: found 3 subdevs [2.622558] THERMAL EST num\_resources: 0 [2.622561] [THERMAL EST subdev 0] [2.622564] [THERMAL EST subdev 1] [2.622566] [THERMAL EST subdev 2] [2.622650] gk20a 17000000.gp10b: failed to allocate secure buffer -12 [2.622803] thermal thermal\_zone7: Registering thermal zone thermal\_zone7 fo r type thermal-fan-est [2.622805] THERMAL EST: thz register success. [2.622885] THERMAL EST: end of probe, return err: 0 [2.622930] tegra\_profiler: Branch: Dev [2.622932] tegra\_profiler: Version: 1.117 [2.622933] tegra\_profiler: Samples version: 41 [2.622934] tegra\_profiler: IO version: 22 [2.622938] armv8\_pmu: imp: 0x41, idcode: 0x1 [2.622940] armv8\_pmu: [0] arch: AA64 PmuV3 ARM CORTEX-A57, type: 5, ver: 0, pmu ver: 0x1 [2.622942] armv8\_pmu: imp: 0x4e, idcode: 0x1 [2.622944] armv8\_pmu: [1] arch: AA64 PmuV3 NVIDIA (Denver), type: 6, ver: 0 , pmu ver: 0x1 [2.622946] armv8\_pmu: imp: 0x4e, idcode: 0x1 [2.622948] armv8\_pmu: [2] arch: AA64 PmuV3 NVIDIA (Denver), type: 6, ver: 0 , pmu ver: 0x1 [2.622950] armv8\_pmu: imp: 0x41, idcode: 0x1 [2.622952] armv8\_pmu: [3] arch: AA64 PmuV3 ARM CORTEX-A57, type: 5, ver: 0, pmu ver: 0x1 [2.622954] armv8\_pmu: imp: 0x41, idcode: 0x1 [2.622955] armv8\_pmu: [4] arch: AA64 PmuV3 ARM CORTEX-A57, type: 5, ver: 0, pmu ver: 0x1 [2.622957] armv8\_pmu: imp: 0x41, idcode: 0x1 [2.622959] armv8\_pmu: [5] arch: AA64 PmuV3 ARM CORTEX-A57, type: 5, ver: 0, pmu ver: 0x1 [2.623062] tegra\_profiler: auth: init [2.625735] tegra-ahci 3507000.ahci-sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode [2.625742] tegra-ahci 3507000.ahci-sata: flags: 64bit ncq sntf pm led pmp p io slum part deso sadm apst [2.632326] scsi host0: tegra\_ahci [2.632548] scsi host1: tegra\_ahci [2.632665] ata1: SATA max UDMA/133 mmio [mem 0x03507000-0x03508fff] port 0x 100 irq 25 [2.632667] ata2: DUMMY [2.633422] spi-tegra114 3210000.spi: Static pin configuration used [2.633771] spi-tegra114 c260000.spi: Static pin configuration used [2.634088] spi-tegra114 3240000.spi: Static pin configuration used [2.634703] tun: Universal TUN/TAP device driver, 1.6 [2.634704] tun: (C) 1999-2004 Max Krasnyansky [maxk@qualcomm.com](mailto:maxk@qualcomm.com) [2.634847] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [2.634848] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [2.634882] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k [2.634883] igb: Copyright (c) 2007-2014 Intel Corporation. [2.635672] PPP generic driver version 2.4.2 [2.635765] PPP BSD Compression module registered [2.635771] PPP Deflate Compression module registered [2.635787] PPP MPPE Compression module registered [2.635798] NET: Registered protocol family 24 [2.635838] usbcore: registered new interface driver r8152 [2.635864] usbcore: registered new interface driver asix [2.635893] usbcore: registered new interface driver ax88179\_178a [2.635918] usbcore: registered new interface driver cdc\_ether [2.635945] usbcore: registered new interface driver smsc75xx [2.635968] usbcore: registered new interface driver net1080 [2.635990] usbcore: registered new interface driver cdc\_subset [2.636013] usbcore: registered new interface driver zaurus [2.636071] usbcore: registered new interface driver cdc\_ncm [2.636264] Wake76 for irq=199 [2.636266] Wake77 for irq=199 [2.636267] Wake78 for irq=199 [2.636268] Wake79 for irq=199 [2.636269] Wake80 for irq=199 [2.636269] Wake81 for irq=199 [2.636270] Wake82 for irq=199 [2.636322] tegra-xotg xotg: usb2 phy is not available yet [2.636796] usbcore: registered new interface driver cdc\_acm [2.636797] cdc\_acm: USB Abstract Control Model driver for USB modems and IS DN adapters [2.636837] usbcore: registered new interface driver usb-storage [2.636881] usbcore: registered new interface driver usbserial [2.636901] usbcore: registered new interface driver cp210x [2.636916] usbserial: USB Serial support registered for cp210x [2.636934] usbcore: registered new interface driver ftdi\_sio [2.636947] usbserial: USB Serial support registered for FTDI USB Serial Dev ice [2.636975] usbcore: registered new interface driver option [2.636989] usbserial: USB Serial support registered for GSM modem (1-port) [2.637011] usbcore: registered new interface driver pl2303 [2.637024] usbserial: USB Serial support registered for pl2303 [2.637272] tegra-usb-cd usb\_cd: otg phy is not available yet [2.638933] eqos 2490000.ether\_qos: Setting local MAC: 0 4 4b a7 ca fd [2.639363] libphy: dwc\_phy: probed [2.639790] tegra-xudc-new 3550000.xudc: usb2 phy is not available yet [2.704011] bcm54xx\_low\_power\_mode(): put phy in iddq-lp mode [2.763660] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [2.765869] tegra\_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [2.765883] tegra\_rtc c2a0000.rtc: Tegra internal Real Time Clock [2.766019] i2c /dev entries driver [2.766766] [OV5693]: probing v4l2 sensor. [2.950874] ata1: SATA link down (SStatus 0 SControl 300) [3.227864] tegradc 15210000.nvdisplay: fb registered [3.234625] PD DISP0 index2 UP [3.239843] PD DISP1 index3 UP [3.244409] PD DISP2 index4 UP [3.257564] hdmi: couldn’t get regulator avdd\_hdmi [3.264082] Parent Clock set for DC plld2 [3.270538] edid invalid [3.316048] edid invalid [3.319943] edid invalid [3.323822] tegradc 15210000.nvdisplay: hdmi: pclk:148351K, set prod-setting :prod\_c\_150M [3.479090] tegradc 15210000.nvdisplay: blank - normal [3.482892] tegradc 15210000.nvdisplay: blank - powerdown [3.541402] PD DISP2 index4 DOWN [3.542504] PD DISP1 index3 DOWN [3.543165] PD DISP0 index2 DOWN [3.577816] tegradc 15210000.nvdisplay: unblank [3.577894] PD DISP0 index2 UP [3.607456] PD DISP1 index3 UP [3.608352] PD DISP2 index4 UP [3.624598] hdmi: couldn’t get regulator avdd\_hdmi [3.624941] Parent Clock set for DC plld2 [3.628013] tegradc 15210000.nvdisplay: hdmi: pclk:148500K, set prod-setting :prod\_c\_150M [3.640085] gspca\_main: v2.14.0 registered [3.640126] usbcore: registered new interface driver gspca\_zc3xx [3.640451] max77620-power max77620-power: Event recorder REG\_NVERC : 0x0 [3.642405] FAN dev name: pwm-fan [3.642454] FAN:gpio request success. [3.642460] FAN: can’t find tach\_gpio [3.642484] pwm\_fan\_driver pwm-fan: cap state:7, cap pwm:255 [3.642650] pwm\_fan\_driver pwm-fan: got pwm for fan [3.642654] pwm\_fan\_driver pwm-fan: tach period: 1000 [3.642956] pwm\_fan\_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, s tate:2 [3.642959] pwm\_fan\_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2 [3.642962] pwm\_fan\_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1 , state:2 [3.642965] pwm\_fan\_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1 , state:2 [3.642968] pwm\_fan\_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1 , state:3 [3.642971] pwm\_fan\_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1 , state:3 [3.642974] pwm\_fan\_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1 , state:3 [3.642977] pwm\_fan\_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1 , state:4 [3.642980] pwm\_fan\_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd= 1, state:4 [3.642982] pwm\_fan\_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd= 1, state:4 [3.643729] device-mapper: uevent: version 1.0.3 [3.643920] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm- [devel@redhat.com](mailto:devel@redhat.com) [3.644306] sdhci: Secure Digital Host Controller Interface driver [3.644307] sdhci: Copyright(c) Pierre Ossman [3.644311] sdhci-pltfm: SDHCI platform and OF driver helper [3.644552] random: nonblocking pool is initialized [3.644607] sdhci-tegra 3460000.sdhci: Parent select= pll\_p rate=408000000 [3.644895] sdhci-tegra 3460000.sdhci: Parent select= pll\_c4\_out0 rate=19624 9804 [3.645124] sdhci-tegra 3460000.sdhci: Client registration for eMC Successfu l [3.646254] tegra-se-elp 3ad0000.se\_elp: tegra\_se\_elp\_probe: complete [3.646377] hidraw: raw HID events driver (C) Jiri Kosina [3.647927] usbcore: registered new interface driver usbhid [3.647929] usbhid: USB HID core driver [3.652761] nvadsp 2993000.adsp: in probe()… [3.666050] nvadsp 2993000.adsp: Registering AMC Error Interrupt [3.666078] nvadsp 2993000.adsp: AMC/ARAM initialized. [3.666265] nvadsp 2993000.adsp: nvadsp\_app\_module\_probe [3.666999] Denver: backdoor interface is NOT available. [3.668679] coresight-tmc 8030000.etf: TMC initialized [3.669768] coresight-tmc 8050000.etr: TMC initialized [3.670112] coresight-tpiu 8060000.tpiu: TPIU initialized [3.670580] coresight-funnel 9010000.funnel\_bccplex: FUNNEL initialized [3.671038] coresight-funnel 8010000.funnel\_major: FUNNEL initialized [3.671436] coresight-funnel 8820000.funnel\_minor: FUNNEL initialized [3.671844] coresight-replicator 8040000.replicator: REPLICATOR initialized [3.672429] coresight-etm4x 9840000.ptm: ETM 4.0 initialized [3.672946] coresight-etm4x 9940000.ptm: ETM 4.0 initialized [3.673460] coresight-etm4x 9a40000.ptm: ETM 4.0 initialized [3.673975] coresight-etm4x 9b40000.ptm: ETM 4.0 initialized [3.673999] Module initialized successfully [3.677058] tegra186-cam-rtcpu b000000.rtcpu: Trace buffer configured at IOV A=0xfc300000 [3.678251] tegra186-cam-rtcpu b000000.rtcpu: already unhalted [3.678338] tegra186-cam-rtcpu b000000.rtcpu: IOVM setup error: 131 [3.678341] tegra186-cam-rtcpu b000000.rtcpu: trace boot sync failed: -5 [3.678463] tegra-ivc ivc-b000000.rtcpu: region 0: iova=0xfc120000-0xfc12957 f size=38272 [3.678800] tegra-ivc ivc-b000000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]= 0x1000-0x1480 TX[16x64]=0x1480-0x1900 [3.678856] tegra-ivc ivc-b000000.rtcpu:vinotify@12c0: vinotify: ver=0 grp=1 RX[64x128]=0x1900-0x3980 TX[64x128]=0x3980-0x5a00 [3.678860] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using AD MA 64-bit with 64 bit addr [3.678901] tegra-ivc ivc-b000000.rtcpu:mods@32c0: mods: ver=0 grp=1 RX[1x64 ]=0x5a00-0x5ac0 TX[1x64]=0x5ac0-0x5b80 [3.678972] tegra-ivc ivc-b000000.rtcpu:ivccontrol@52c0: ivccontrol: ver=0 g rp=1 RX[16x320]=0x5b80-0x7000 TX[16x320]=0x7000-0x8480 [3.679012] tegra-ivc ivc-b000000.rtcpu:ivccapture@72c0: ivccapture: ver=0 g rp=1 RX[16x64]=0x8480-0x8900 TX[16x64]=0x8900-0x8d80 [3.679096] sdhci-tegra 3440000.sdhci: Parent select= pll\_p rate=408000000 [3.679099] tegra-ivc ivc-b000000.rtcpu:dbg@7c00: dbg: ver=0 grp=1 RX[1x384] =0x8d80-0x8f80 TX[1x384]=0x8f80-0x9180 [3.679139] tegra-ivc ivc-b000000.rtcpu:dbg@7e00: dbg: ver=0 grp=1 RX[1x384] =0x9180-0x9380 TX[1x384]=0x9380-0x9580 [3.679335] tegra186-cam-rtcpu b000000.rtcpu: using cam RTCPU IRQ (52) [3.679337] sdhci-tegra 3440000.sdhci: Client registration for eMC Successfu l [3.679338] tegra186-cam-rtcpu b000000.rtcpu: tegra\_camrtc\_mon\_create is suc cessful [3.680012] tegra186-cam-rtcpu b000000.rtcpu: IOVM setup error: 131 [3.680180] tegra186-cam-rtcpu b000000.rtcpu: ivc-bus boot sync failed: -5 [3.680188] tegra186-cam-rtcpu b000000.rtcpu: firmware version cpu=sce cmd=4 sha1=a8b1ecdd9615cd817a56df035be363fce3b0b88f [3.680417] camchar: rtcpu character device driver loaded [3.681794] arm-smmu 12000000.iommu: Unexpected {global,context} fault, this could be serious [3.681799] arm-smmu 12000000.iommu: GFSR 0x80000002, GFSYNR0 0x0000 0000, GFSYNR1 0x00001816, GFSYNR2 0x00000000 [3.681913] (255) csr\_aonr: EMEM address decode error [3.681932] status = 0x20367097; addr = 0x3ffffffc0 [3.681937] secure: yes, access-type: read [3.681952] unknown mcerr fault, int\_status=0x00000000, ch\_int\_status=0x0000 0000, hubc\_int\_status=0x00000000 [3.681963] unknown mcerr fault, int\_status=0x00000000, ch\_int\_status=0x0000 0000, hubc\_int\_status=0x00000000 [3.681973] unknown mcerr fault, int\_status=0x00000000, ch\_int\_status=0x0000 0000, hubc\_int\_status=0x00000000 [3.681981] mc-err: Too many MC errors; throttling prints [3.682289] tegra186-aondbg aondbg: aondbg driver probe() OK [3.682517] register\_ari\_mca\_banks: Registered MCA ROC:IOB [3.682608] register\_ari\_mca\_banks: Registered MCA ROC:CCE [3.682971] tegra18-bridge 2390000.axi2apb: bridge probed OK [3.682999] tegra18-bridge 23a0000.axi2apb: bridge probed OK [3.683023] tegra18-bridge 23b0000.axi2apb: bridge probed OK [3.683046] tegra18-bridge 23c0000.axi2apb: bridge probed OK [3.683069] tegra18-bridge 23d0000.axi2apb: bridge probed OK [3.683093] tegra18-bridge 2100000.axip2p: bridge probed OK [3.683115] tegra18-bridge 2110000.axip2p: bridge probed OK [3.683137] tegra18-bridge 2120000.axip2p: bridge probed OK [3.683159] tegra18-bridge 2130000.axip2p: bridge probed OK [3.683182] tegra18-bridge 2140000.axip2p: bridge probed OK [3.683203] tegra18-bridge 2150000.axip2p: bridge probed OK [3.683228] tegra18-bridge 2160000.axip2p: bridge probed OK [3.683251] tegra18-bridge 2170000.axip2p: bridge probed OK [3.683275] tegra18-bridge 2180000.axip2p: bridge probed OK [3.683314] tegra18-bridge 2190000.axip2p: bridge probed OK [3.683365] \*\*\*\* A57 ECC: Enabled [3.683367] tegra18\_a57\_serr\_init: on CPU 4 a A57 Core [3.683504] parse\_throttle\_dt\_data: Num cap clks = 4 [3.683506] parse\_throttle\_dt\_data: clk=mcpu type=1 [3.683508] parse\_throttle\_dt\_data: clk=bcpu type=2 [3.683513] parse\_throttle\_dt\_data: clk=gpu type=4 [3.683515] parse\_throttle\_dt\_data: clk=emc type=3 [3.683981] tegra\_throttle\_probe: probe successful. #cdevs=4 [3.684086] tegra18x\_actmon d230000.actmon: in actmon\_register()… [3.686569] tegra18x\_actmon d230000.actmon: initialization Completed for the device mc\_all [3.686883] hw perfevents: enabled with denver15\_uncore\_pmu PMU driver, 3 co unters available [3.688930] tegra-se-nvhost 15810000.se: initialized [3.689373] tegra-se-nvhost 15810000.se: tegra\_se\_probe: complete [3.689701] tegra-se-nvhost 15820000.se: initialized [3.690133] tegra-se-nvhost 15820000.se: tegra\_se\_probe: complete [3.690416] tegra-se-nvhost 15830000.se: initialized [3.690525] tegra-se-nvhost 15830000.se: tegra\_se\_probe: complete [3.690796] tegra-se-nvhost 15840000.se: initialized [3.691247] tegra-se-nvhost 15840000.se: tegra\_se\_probe: complete [3.695006] tegra-gpcdma 2600000.dma: GPC DMA driver register 32 channels [3.696921] arm-smmu 12000000.iommu: Unexpected {global,context} fault, this could be serious [3.696926] arm-smmu 12000000.iommu: GFSR 0x80000002, GFSYNR0 0x0000 0000, GFSYNR1 0x00001432, GFSYNR2 0x00000000 [3.696953] arm-smmu 12000000.iommu: Unexpected {global,context} fault, this could be serious [3.696957] arm-smmu 12000000.iommu: GFSR 0x00000002, GFSYNR0 0x0000 0000, GFSYNR1 0x00001432, GFSYNR2 0x00000000 [3.696989] arm-smmu 12000000.iommu: Unexpected {global,context} fault, this could be serious [3.696991] arm-smmu 12000000.iommu: GFSR 0x00000002, GFSYNR0 0x0000 0000, GFSYNR1 0x00001432, GFSYNR2 0x00000000 [3.697027] arm-smmu 12000000.iommu: Unexpected {global,context} fault, this could be serious [3.697029] arm-smmu 12000000.iommu: GFSR 0x00000002, GFSYNR0 0x0000 0000, GFSYNR1 0x00001432, GFSYNR2 0x00000000 [3.697062] arm-smmu 12000000.iommu: Unexpected {global,context} fault, this could be serious [3.697065] arm-smmu 12000000.iommu: GFSR 0x00000002, GFSYNR0 0x0000 0000, GFSYNR1 0x00001432, GFSYNR2 0x00000000 [3.697109] arm-smmu 12000000.iommu: Unexpected {global,context} fault, this could be serious [3.697112] arm-smmu 12000000.iommu: GFSR 0x80000002, GFSYNR0 0x0000 0002, GFSYNR1 0x00000032, GFSYNR2 0x00000000 [3.697206] arm-smmu 12000000.iommu: Unexpected {global,context} fault, this could be serious [3.697209] arm-smmu 12000000.iommu: GFSR 0x80000002, GFSYNR0 0x0000 0000, GFSYNR1 0x00001832, GFSYNR2 0x00000000 [3.697235] arm-smmu 12000000.iommu: Unexpected {global,context} fault, this could be serious [3.697237] arm-smmu 12000000.iommu: GFSR 0x00000002, GFSYNR0 0x0000 0000, GFSYNR1 0x00001832, GFSYNR2 0x00000000 [3.698806] cpufreq: platform driver Initialization: pass [3.699291] tegra\_cluster\_clk e090000.cluster\_clk\_priv: in probe()… [3.699481] tegra\_cluster\_clk e090000.cluster\_clk\_priv: passed [3.700091] tegra186-padctl 3520000.pinctrl: padctl mmio start 0x00000000035 20000 end 0x0000000003520fff [3.700115] tegra186-padctl 3520000.pinctrl: ao mmio start 0x000000000354000 0 end 0x0000000003540fff [3.700280] tegra186-padctl 3520000.pinctrl: FUSE\_SKU\_USB\_CALIB\_0 0x2ca895 [3.700293] tegra186-padctl 3520000.pinctrl: FUSE\_USB\_CALIB\_EXT\_0 0x8 [3.703793] tegra186-padctl 3520000.pinctrl: using UTMI port 0 for otg [3.706314] tegra186-padctl 3520000.pinctrl: VBUS over-current detection ena bled [3.708072] tegra-bpmp-thermal d000000.bpmp:bpmpthermal: zone 0 not supporte d [3.709217] tegra-bpmp-thermal d000000.bpmp: ---
**Author:** ![WayneWWW](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/waynewww/32/14043_2.png) [@WayneWWW](https://forums.developer.nvidia.com/u/WayneWWW)\ **Post date:** [November 1, 2018, 10:13am UTC](https://forums.developer.nvidia.com/t/tx2-hdmi-not-display/66823/5 "2018-11-01T10:13:07Z")
Log has been cut, please try to use the code block function to wrap your log. ```auto This is code block ``` ---
**Author:** ![wawxh1101](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@wawxh1101](https://forums.developer.nvidia.com/u/wawxh1101)\ **Post date:** [November 1, 2018, 10:21am UTC](https://forums.developer.nvidia.com/t/tx2-hdmi-not-display/66823/6 "2018-11-01T10:21:47Z")
[code]3.3 [0.000000] Booting Linux on physical CPU 0x100 [0.000000] Initializing cgroup subsys cpuset [0.000000] Initializing cgroup subsys cpu [0.000000] Initializing cgroup subsys cpuacct [0.000000] Linux version 4.4.38-tegra (buildbrain@mobile-u64-773) (gcc vers ion 4.8.5 (GCC) ) #1 SMP PREEMPT Thu May 17 00:15:19 PDT 2018 [0.000000] Boot CPU: AArch64 Processor [411fd073] [0.000000] earlycon: Early serial console at MMIO32 0x3100000 (options ‘’) [0.000000] bootconsole [uart0] enabled [0.000000] Found tegra\_fbmem2: 00800000@969ee000 [0.000000] Found lut\_mem2: 00002008@969eb000 [0.000000] Reserved memory: initialized node ramoops\_carveout, compatible i d nvidia,ramoops [0.000000] cma: Reserved 64 MiB at 0x00000000fc000000 [0.000000] On node 0 totalpages: 2052096 [0.000000] DMA zone: 8192 pages used for memmap [0.000000] DMA zone: 0 pages reserved [0.000000] DMA zone: 519680 pages, LIFO batch:31 [0.000000] Normal zone: 23968 pages used for memmap [0.000000] Normal zone: 1532416 pages, LIFO batch:31 [0.000000] psci: probing for conduit method from DT. [0.000000] psci: PSCIv1.0 detected in firmware. [0.000000] psci: Using standard PSCI v0.2 function IDs [0.000000] psci: MIGRATE\_INFO\_TYPE not supported. [0.000000] PERCPU: Embedded 17 pages/cpu @ffffffc1f5f9a000 s31360 r8192 d30 080 u69632 [0.000000] pcpu-alloc: s31360 r8192 d30080 u69632 alloc=17_4096 [0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pa ges: 2019936 [0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait console=tty S0,115200n8 console=tty0 OS=l4t fbcon=map:0 net.ifnames=0 memtype=0 video=tegra fb no\_console\_suspend=1 earlycon=uart8250,mmio32,0x03100000 nvdumper\_reserved=0 x2772e0000 gpt tegra\_fbmem2=0x800000@0x969ee000 lut\_mem2=0x2008@0x969eb000 tegr aid=18.1.2.0.0 tegra\_keep\_boot\_clocks maxcpus=6 boot.slot\_suffix= boot.ratchetv alues=0.2.1 androidboot.serialno=0324817094137 bl\_prof\_dataptr=0x10000@0x277040 000 sdhci\_tegra.en\_boot\_part\_access=1 root=/dev/mmcblk0p1 rw rootwait rootfstyp e=ext4 [0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 byt es) [0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes ) [0.000000] Memory: 7967768K/8208384K available (11296K kernel code, 1841K r wdata, 5796K rodata, 1168K init, 691K bss, 175080K reserved, 65536K cma-reserve d) [0.000000] Virtual kernel memory layout: vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000 ( 246 GB) vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum) 0xffffffbdc2000000 - 0xffffffbdc9da0000 ( 125 MB actual) fixed : 0xffffffbffa7fd000 - 0xffffffbffac00000 ( 4108 KB) PCI I/O : 0xffffffbffae00000 - 0xffffffbffbe00000 ( 16 MB) modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB) memory : 0xffffffc000000000 - 0xffffffc1f6800000 ( 8040 MB) .init : 0xffffffc001132000 - 0xffffffc001256000 ( 1168 KB) .text : 0xffffffc000080000 - 0xffffffc001132000 ( 17096 KB) .data : 0xffffffc001278000 - 0xffffffc001444730 ( 1842 KB) [0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [0.000000] Preemptible hierarchical RCU implementation. [0.000000] Build-time adjustment of leaf fanout to 64. [0.000000] RCU restricting CPUs from NR\_CPUS=64 to nr\_cpu\_ids=6. [0.000000] RCU: Adjusting geometry for rcu\_fanout\_leaf=64, nr\_cpu\_ids=6 [0.000000] NR\_IRQS:64 nr\_irqs:64 0 [0.000000] GIC: Using split EOI/Deactivate mode [0.000000] Architected cp15 timer(s) running at 31.25MHz (phys). [0.000000] clocksource: arch\_sys\_counter: mask: 0xffffffffffffff max\_cycles : 0xe6a171046, max\_idle\_ns: 881590405314 ns [0.000002] sched\_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398 046511088ns [0.009853] Console: colour dummy device 80x25 [0.014513] console [tty0] enabled [0.018070] bootconsole [uart0] disabled [0.022174] kmemleak: Kernel memory leak detector disabled [0.022186] Calibrating delay loop (skipped), value calculated using timer f requency… 62.50 BogoMIPS (lpj=125000) [0.022198] pid\_max: default: 32768 minimum: 301 [0.022247] Security Framework initialized [0.022285] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [0.022296] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 byt es) [0.022676] Initializing cgroup subsys io [0.022690] Initializing cgroup subsys memory [0.022706] Initializing cgroup subsys devices [0.022715] Initializing cgroup subsys freezer [0.022724] Initializing cgroup subsys net\_cls [0.022734] Initializing cgroup subsys perf\_event [0.022743] Initializing cgroup subsys net\_prio [0.022753] Initializing cgroup subsys pids [0.022762] Initializing cgroup subsys debug [0.022902] CPU0 ipc=752 [0.022911] CPU1 ipc=1024 [0.022919] CPU2 ipc=1024 [0.022928] CPU3 ipc=752 [0.022936] CPU4 ipc=752 [0.022946] CPU5 ipc=752 [0.022982] ASID allocator initialised with 65536 entries [0.046211] tegra-id: chipid=21817. [0.046229] tegra-id: opt\_subrevision=1. [0.046242] Tegra Revision: A02p SKU: 0xdc CPU Process: 0 SoC Process: 0 [0.046935] DTS File Name: /dvs/git/dirty/git-master\_linux/kernel/kernel-4.4 /arch/arm64/boot/dts/…/…/…/…/…/…/hardware/nvidia/platform/t18x/quill/kern el-dts/tegra186-quill-p3310-1000-c03-00-base.dts [0.046960] DTB Build time: May 17 2018 00:17:47 [0.062570] CPU1: Booted secondary processor [4e0f0030] [0.074127] CPU2: Booted secondary processor [4e0f0030] [0.085800] CPU3: Booted secondary processor [411fd073] [0.097815] CPU4: Booted secondary processor [411fd073] [0.109802] CPU5: Booted secondary processor [411fd073] [0.109865] Brought up 6 CPUs [0.109921] SMP: Total of 6 processors activated. [0.109933] CPU: All CPU(s) started at EL2 [0.110353] devtmpfs: initialized [0.137006] Initilizing CustomIPI irq domain [0.137204] clocksource: jiffies: mask: 0xffffffff max\_cycles: 0xffffffff, m ax\_idle\_ns: 7645041785100000 ns [0.137988] pinctrl core: initialized pinctrl subsystem [0.138165] OS set in device tree is not L4T. [0.138356] regulator-dummy: no parameters [0.138461] Initializing plugin-manager [0.138514] Plugin module not found [0.138934] node /plugin-manager/soc-prod-a02-fragment match with chip-id A0 2P [0.139275] node /plugin-manager/fragement@0 match with odm-data enable-denv er-wdt [0.139900] node /plugin-manager/fragement@4 match with odm-data enable-denv er-wdt [0.141089] node /plugin-manager/fragment-sdwake-p3310-1000-300 match with b oard \>=3310-1000-300 [0.141465] node /plugin-manager/fragement-pmon-p3310-1000-300 match with bo ard \>=3310-1000-300 [0.141728] node /plugin-manager/fragement-pmon-p3310-1000-800 match with bo ard \>=3310-1000-800 [0.141952] node /plugin-manager/fragment-devslp@0 match with board \>=3310-1 000-200 [0.142383] node /plugin-manager/fragment-500-pcie-config match with board \> =3310-1000-500 [0.142837] node /plugin-manager/fragment-500-xusb-config match with board \> =3310-1000-500 [0.143118] node /plugin-manager/fragment-500-e3325-pcie match with board \>= 3310-1000-500 [0.143508] node /plugin-manager/fragment-p3310-c00-comm match with board \>= 3310-1000-800 [0.143758] node /plugin-manager/fragment-p3310-c00-pmic match with board \>= 3310-1000-800 [0.143984] node /plugin-manager/fragment-p3310-c01 match with board \>=3310- 1000-900 [0.144246] node /plugin-manager/fragment-p3310-c03 match with board \>=3310- 1000-B00 [0.145857] node /plugin-manager/fragment-e3326@0 match with board 3326-_ [0.146966] node /plugin-manager/fragment-p3310-c00-camera match with board > =3310-1000-800 > [0.148791] Adding domain adsp-pd to PM domain ape-pd > [0.151185] NET: Registered protocol family 16 > [0.152031] console [pstore-1] enabled > [0.152044] pstore: Registered ramoops as persistent store backend > [0.152057] ramoops: attached 0x200000@0x277080000, ecc: 0/0 > [0.161352] cpuidle: using governor ladder > [0.165800] cpuidle: using governor menu > [0.166935] bpmp: waiting for handshake > [0.166950] bpmp: handshake completed > [0.166990] bpmp: synchronizing channels > [0.167019] bpmp: channels synchronized > [0.167030] bpmp: mail init ok > [0.167394] vdso: 2 pages (1 code @ ffffffc00127d000, 1 data @ ffffffc00127c 1. [0.167427] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [0.168370] atomic\_pool\_init():526: DMA: preallocated 1024 KiB pool for atom ic allocations [0.169808] tegra\_powergate\_init: DONE [0.169829] DTS File Name: /dvs/git/dirty/git-master\_linux/kernel/kernel-4.4 /arch/arm64/boot/dts/…/…/…/…/…/…/hardware/nvidia/platform/t18x/quill/kern el-dts/tegra186-quill-p3310-1000-c03-00-base.dts [0.169856] DTB Build time: May 17 2018 00:17:47 [0.170795] Tegra reboot handler registered. [0.171863] Registering Tegra186 clocks (this may take a while)…done [0.174008] arm-smmu 12000000.iommu: probing hardware configuration… [0.174026] arm-smmu 12000000.iommu: SMMUv2 with: [0.174040] arm-smmu 12000000.iommu: stage 1 translation [0.174052] arm-smmu 12000000.iommu: stage 2 translation [0.174064] arm-smmu 12000000.iommu: nested translation [0.174078] arm-smmu 12000000.iommu: stream matching with 128 regist er groups, mask 0x7f80 [0.174097] arm-smmu 12000000.iommu: SMMU address space size (0x800000) diff ers from mapped region size (0x1000000)! [0.174116] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 onl y) [0.174130] arm-smmu 12000000.iommu: Stage-1: 39-bit VA → 48-bit IP A [0.174143] arm-smmu 12000000.iommu: Stage-2: 39-bit IPA → 48-bit P A [0.192687] /iommu@12000000: could not get #stream-id-cells for /pcie-contro ller@10003000 [0.192706] arm-smmu 12000000.iommu: registered 40 master devices [0.195316] iommu: Adding device 3460000.sdhci to group 0 [0.195764] iommu: Adding device 3400000.sdhci to group 1 [0.202174] iommu: Adding device 2490000.ether\_qos to group 2 [0.203396] Wake73 for irq=42 [0.203581] iommu: Adding device smmu\_test to group 3 [0.203961] mc: mapped MMIO address: 0xffffff8000560000 → 0x2c10000 [0.203983] mc: mapped MMIO address: 0xffffff8000640000 → 0x2c20000 [0.204002] mc: mapped MMIO address: 0xffffff8000660000 → 0x2c30000 [0.204021] mc: mapped MMIO address: 0xffffff8000fa0000 → 0x2c40000 [0.204042] mc: mapped MMIO address: 0xffffff8000fc0000 → 0x2c50000 [0.204061] mc-err: Set intmask: 0xf3140 [0.204204] ecc-err: dram ecc disabled-MC\_ECC\_CONTROL:0x0000000c [0.204804] Wake76 for irq=199 [0.204817] Wake77 for irq=199 [0.204827] Wake78 for irq=199 [0.204837] Wake79 for irq=199 [0.204846] Wake80 for irq=199 [0.204856] Wake81 for irq=199 [0.204865] Wake82 for irq=199 [0.204933] iommu: Adding device 3530000.xhci to group 4 [0.205197] iommu: Adding device 3550000.xudc to group 5 [0.205710] tegra-pmc c360000.pmc: scratch reg offset dts data not present [0.205726] tegra-pmc: ### PMC reset source: Power on reset [0.205738] tegra-pmc: ### PMC reset level: L0 [0.205748] tegra-pmc: ### PMC reset status reg: 0x0 [0.205905] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl register ed [0.205925] tegra-pmc c360000.pmc: IO padctrl driver initialized [0.206025] tegra186-aowake c370000.pmc: WAKE\_AOWAKE\_CTRL\_0 = 3 [0.206041] tegra186-aowake c370000.pmc: WAKE\_AOWAKE\_CNTRL\_24(PMU\_INT) = 320 [0.206364] iommu: Adding device 13e10000.host1x to group 6 [0.206508] iommu: Adding device 13e10000.host1x:ctx0 to group 7 [0.206667] iommu: Adding device 13e10000.host1x:ctx1 to group 8 [0.206813] iommu: Adding device 13e10000.host1x:ctx2 to group 9 [0.206959] iommu: Adding device 13e10000.host1x:ctx3 to group 10 [0.207112] iommu: Adding device 13e10000.host1x:ctx4 to group 11 [0.207257] iommu: Adding device 13e10000.host1x:ctx5 to group 12 [0.207405] iommu: Adding device 13e10000.host1x:ctx6 to group 13 [0.207558] iommu: Adding device 13e10000.host1x:ctx7 to group 14 [0.207862] iommu: Adding device 150c0000.nvcsi to group 15 [0.208270] iommu: Adding device 15700000.vi to group 16 [0.208498] iommu: Adding device 15600000.isp to group 17 [0.208727] iommu: Adding device 15210000.nvdisplay to group 18 [0.208806] platform 15210000.nvdisplay: IOVA linear map 0x00000000969ee000( 800000) [0.208827] platform 15210000.nvdisplay: IOVA linear map 0x00000000969eb000( 3000) [0.208943] iommu: Adding device 15340000.vic to group 19 [0.209081] iommu: Adding device 154c0000.nvenc to group 20 [0.209206] iommu: Adding device 15480000.nvdec to group 21 [0.209449] iommu: Adding device 15380000.nvjpg to group 22 [0.209577] iommu: Adding device 15500000.tsec to group 23 [0.209708] iommu: Adding device 15100000.tsecb to group 24 [0.210227] iommu: Adding device 15810000.se to group 25 [0.210357] iommu: Adding device 15820000.se to group 26 [0.210489] iommu: Adding device 15830000.se to group 27 [0.210760] iommu: Adding device 15840000.se to group 28 [0.211991] iommu: Adding device 17000000.gp10b to group 29 [0.214845] tegra-reset 5000000.clock: registered 193 resets. [0.217659] bpmp: ping status is 0 [0.217954] arm-smmu 12000000.iommu: Unexpected {global,context} fault, this could be serious [0.217979] arm-smmu 12000000.iommu: GFSR 0x80000002, GFSYNR0 0x0000 0000, GFSYNR1 0x00001432, GFSYNR2 0x00000000 [0.218046] bpmp d000000.bpmp: firmware tag is [0.218097] (255) csw\_bpmpw: MC request violates VPR requirements [0.218111] status = 0x00337094; addr = 0x3ffffffc0 [0.218144] secure: yes, access-type: write [0.218159] unknown mcerr fault, int\_status=0x00000000, ch\_int\_status=0x0000 0000, hubc\_int\_status=0x00000000 [0.218186] unknown mcerr fault, int\_status=0x00000000, ch\_int\_status=0x0000 0000, hubc\_int\_status=0x00000000 [0.218196] unknown mcerr fault, int\_status=0x00000000, ch\_int\_status=0x0000 0000, hubc\_int\_status=0x00000000 [0.218206] mc-err: Too many MC errors; throttling prints [0.218697] bpmp d000000.bpmp: probe ok [0.222631] GPIO line 461 (cam0-rst) hogged as output/low [0.222691] GPIO line 456 (cam0-pwdn) hogged as output/low [0.222760] GPIO line 457 (cam1-rst) hogged as output/low [0.222807] GPIO line 426 (cam1-pwdn) hogged as output/low [0.222866] GPIO line 424 (wifi-enable) hogged as output/high [0.222915] GPIO line 445 (sdmmc-wake-input) hogged as input [0.222965] GPIO line 446 (sdmmc-wake-output) hogged as output/low [0.223089] gpiochip\_add\_data: registered GPIOs 320 to 511 on device: tegra- gpio [0.224949] GPIO line 315 (wifi-wake-ap) hogged as input [0.225048] gpiochip\_add\_data: registered GPIOs 256 to 319 on device: tegra- gpio-aon [0.226084] iommu: Adding device sound to group 30 [0.227939] iommu: Adding device 3510000.hda to group 31 [0.229106] iommu: Adding device adsp\_audio to group 32 [0.230578] iommu: Adding device 2993000.adsp to group 33 [0.240353] vdd-ac-bat: 5000 mV [0.243111] vdd-1v8-ap: 1800 mV [0.260758] SCSI subsystem initialized [0.260979] libata version 3.00 loaded. [0.261156] usbcore: registered new interface driver usbfs [0.261219] usbcore: registered new interface driver hub [0.261343] usbcore: registered new device driver usb [0.265497] GPIO line 241 (touch-rail-1) hogged as output/high [0.265951] GPIO line 242 (touch-rail-2) hogged as output/high [0.266067] gpiochip\_add\_data: registered GPIOs 240 to 255 on device: tca953 9 [0.267509] GPIO line 228 (lcd-bias-en-rail) hogged as output/high [0.267633] gpiochip\_add\_data: registered GPIOs 224 to 239 on device: tca953 9 [0.278585] media: Linux media interface: v0.10 [0.278693] Linux video capture interface: v2.00 [0.281784] pps\_core: LinuxPPS API ver. 1 registered [0.281824] pps\_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giom etti [giometti@linux.it](mailto:giometti@linux.it) [0.281883] PTP clock support registered [0.282914] tegra\_wdt\_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 se c [0.282990] tegra\_wdt\_t18x 30c0000.watchdog: Registered successfully [0.284565] max77620 4-003c: PMIC Version OTP:0x45 and ES:0x8 [0.286629] GPIO line 221 (spmic\_gpio\_input\_5) hogged as input [0.286852] GPIO line 222 (spmic\_gpio\_input\_6) hogged as input [0.286971] gpiochip\_add\_data: registered GPIOs 216 to 223 on device: max776 20-gpio [0.294752] vddio-ddr: at 1125 mV [0.298585] avdd\_dsi\_csi: 1200 mV [0.302598] vdd-1v8: 1800 mV [0.306592] vdd-3v3-sys: 3300 mV [0.307725] spmic-ldo0: at 1800 mV [0.308576] spmic-ldo1: at 800 mV [0.314582] vddio-3v3: 3300 mV [0.315215] vddio-sdmmc1: 1800 ↔ 3300 mV at 3300 mV [0.317349] vdd-rtc: at 800 mV [0.318044] avdd-ts-hv: 1800 ↔ 3300 mV at 1800 mV [0.321348] spmic-ldo6: at 1500 mV [0.325347] vdd-pex-1v05: 1000 mV [0.325894] dvdd-pex: 1000 mV [0.326148] max77620 4-003c: max77620 probe successful [0.326403] Advanced Linux Sound Architecture Driver Initialized. [0.327356] en-vdd-sd: 3300 mV [0.327954] en-vdd-cam: 1800 mV [0.329803] vdd-hdmi: 5000 mV [0.329985] vdd-usb0-5v: 5000 mV [0.330155] vdd-usb1-5v: 5000 mV [0.333803] en-vdd-ts-1v8: 1800 mV [0.337802] en-vdd-ts-hv-3v3: 3300 mV [0.338321] en-vdd-disp-3v3: 3300 mV [0.338830] en-mdm-pwr-3v7: 3700 mV [0.339346] en-vdd-disp-1v8: 1800 mV [0.339881] en-vdd-cam-hv-2v8: 2800 mV [0.340405] en-vdd-cam-1v2: 1200 mV [0.340930] vdd-fan: 5000 mV [0.341041] vdd-3v3: 3300 mV [0.341771] dis-vdd-1v2: 1200 mV [0.341893] en-vdd-vcm-2v8: 2800 mV [0.342429] vdd-usb2-5v: 5000 mV [0.342539] vdd-sys-bl: 3300 mV [0.343067] en-vdd-sys: 1200 mV [0.346429] extcon-gpio-states external-connection:extcon@1: Cable state 0 [0.346850] clocksource: Switched to clocksource arch\_sys\_counter [0.365072] nvmap\_heap\_init: nvmap\_heap\_init: created heap block cache [0.365355] nvmap: nvmap\_override\_cache\_ops() set roc flush ops to replace c ache ops by set/ways [0.365848] nvmap\_page\_pool\_init: Total RAM pages: 2008326 [0.365866] nvmap\_page\_pool\_init: nvmap page pool size: 251040 pages (980 MB ) [0.366098] nvmap\_background\_zero\_thread: PP zeroing thread starting. [0.370553] Wake76 for irq=199 [0.370567] Wake77 for irq=199 [0.370578] Wake78 for irq=199 [0.370589] Wake79 for irq=199 [0.370599] Wake80 for irq=199 [0.370609] Wake81 for irq=199 [0.370618] Wake82 for irq=199 [0.371388] thermal thermal\_zone0: Registering thermal zone thermal\_zone0 fo r type BCPU-therm [0.371583] thermal thermal\_zone1: Registering thermal zone thermal\_zone1 fo r type MCPU-therm [0.371973] thermal thermal\_zone2: Registering thermal zone thermal\_zone2 fo r type GPU-therm [0.372052] thermal thermal\_zone3: Registering thermal zone thermal\_zone3 fo r type PLL-therm [0.372197] thermal thermal\_zone4: Registering thermal zone thermal\_zone4 fo r type Tboard\_tegra [0.372340] thermal thermal\_zone5: Registering thermal zone thermal\_zone5 fo r type Tdiode\_tegra [0.372487] thermal thermal\_zone6: Registering thermal zone thermal\_zone6 fo r type PMIC-Die [0.372778] isomgr\_init(): iso emc max clk=1866000KHz [0.372791] isomgr\_init(): max\_iso\_bw=26870400KB [0.372875] NET: Registered protocol family 2 [0.373185] TCP established hash table entries: 65536 (order: 7, 524288 byte s) [0.373415] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [0.373714] TCP: Hash tables configured (established 65536 bind 65536) [0.373772] UDP hash table entries: 4096 (order: 5, 131072 bytes) [0.373826] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [0.373994] NET: Registered protocol family 1 [0.374192] RPC: Registered named UNIX socket transport module. [0.374208] RPC: Registered udp transport module. [0.374220] RPC: Registered tcp transport module. [0.374231] RPC: Registered tcp NFSv4.1 backchannel transport module. [0.374252] PCI: CLS 0 bytes, default 128 [0.374347] Trying to unpack rootfs image as initramfs… [0.388061] host1x 13e10000.host1x: initialized [0.388915] hw perfevents: enabled with armv8\_pmuv3 PMU driver, 7 counters a vailable [0.390786] futex hash table entries: 2048 (order: 6, 262144 bytes) [0.390947] audit: initializing netlink subsys (disabled) [0.390980] audit: type=2000 audit(0.380:1): initialized [0.397778] io scheduler noop registered [0.397886] io scheduler cfq registered (default) [0.400766] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [0.401934] tegra-pwm 3290000.pwm: PWM clk can sleep in ops [0.402994] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [0.404039] tegra-pwm c340000.pwm: PWM clk can sleep in ops [0.407487] tsec 15500000.tsec: initialized [0.408609] tsec 15100000.tsecb: initialized [0.410930] nvdec 15480000.nvdec: initialized [0.414550] falcon 15340000.vic: initialized [0.415548] falcon 154c0000.nvenc: initialized [0.416532] falcon 15380000.nvjpg: initialized [0.417287] iommu\_context\_dev 13e10000.host1x:ctx0: initialized (streamid=56 ) [0.417786] iommu\_context\_dev 13e10000.host1x:ctx1: initialized (streamid=57 ) [0.418278] iommu\_context\_dev 13e10000.host1x:ctx2: initialized (streamid=58 ) [0.418772] iommu\_context\_dev 13e10000.host1x:ctx3: initialized (streamid=59 ) [0.419284] iommu\_context\_dev 13e10000.host1x:ctx4: initialized (streamid=60 ) [0.419782] iommu\_context\_dev 13e10000.host1x:ctx5: initialized (streamid=61 ) [0.420273] iommu\_context\_dev 13e10000.host1x:ctx6: initialized (streamid=62 ) [0.420762] iommu\_context\_dev 13e10000.host1x:ctx7: initialized (streamid=63 ) [0.423332] DC OR NODE connected to /host1x/sor1 [0.423457] generic\_infoframe\_type: 0x87 [0.423468] tegra\_camera\_platform tegra-camera-platform: tegra\_camera\_probe: camera\_platform\_driver probe [0.423562] misc tegra\_camera\_ctrl: tegra\_camera\_isomgr\_register tpg\_max\_iso = 3916800KBs [0.423577] tegradc 15210000.nvdisplay: DT parsed successfully [0.423593] misc tegra\_camera\_ctrl: tegra\_camera\_isomgr\_register isp\_iso\_bw= 4687500, vi\_iso\_bw=1500000, max\_bw=4687500 [0.423609] tegradc 15210000.nvdisplay: Display dc.ffffff8002320000 register ed with id=0 [0.431174] tegra\_nvdisp\_bandwidth\_register\_max\_config: max config iso bw = 16727000 KB/s [0.431196] tegra\_nvdisp\_bandwidth\_register\_max\_config: max config EMC floor = 665600000 Hz [0.431213] tegra\_nvdisp\_bandwidth\_register\_max\_config: max config hubclk = 357620000 Hz [0.431261] tegradc 15210000.nvdisplay: vblank syncpt # 7 for dc 1 [0.431277] tegradc 15210000.nvdisplay: vpulse3 syncpt # 8 for dc 1 [0.431505] tegra-adma 2930000.adma: Tegra ADMA driver register 10 channels [0.431673] hdmi: couldn’t get regulator vdd\_hdmi\_5v0: -517 [0.432173] tegradc 15210000.nvdisplay: Bootloader disp\_param detected. Dete cted mode: 1920x1080 (on 0x0mm) pclk=148350937 [0.433941] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initi alized [0.434275] kfuse 3830000.kfuse: initialized [0.434282] tegradc 15210000.nvdisplay: hdmi: no prod\_list\_hdmi\_board, use d efault range [0.435654] tegradc 15210000.nvdisplay: probed [0.436104] tegra-pmc-iopower pmc-iopower: NO\_IOPOWER setting 0x0 [0.436567] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [0.438477] console [ttyS0] disabled [0.438530] 3100000.serial: ttyS0 at MMIO 0x3100000 (irq = 37, base\_baud = 2 5500000) is a Tegra [2.531569] console [ttyS0] enabled [2.533744] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 38, base\_baud = 0) is a TEGRA\_UART [2.534887] c280000.serial: ttyTHS2 at MMIO 0xc280000 (irq = 39, base\_baud = 0) is a TEGRA\_UART [2.535129] serial-tegra 3130000.serial: RX in PIO mode [2.536132] 3130000.serial: ttyTHS3 at MMIO 0x3130000 (irq = 40, base\_baud = 0) is a TEGRA\_UART [2.546427] Console: switching to colour frame buffer device 240x67 [2.547895] brd: module loaded [2.553004] loop: module loaded [2.553234] nct1008\_nct72 7-004c: find device tree node, parsing dt [2.553238] nct1008\_nct72 7-004c: starting parse dt [2.553319] nct1008\_nct72 7-004c: success parsing dt [2.553440] nct1008\_nct72 7-004c: success in enabling tmp451 VDD rail [2.620405] tmp451: Enabled overheat logging at 104.00C [2.620492] nct1008\_nct72 7-004c: nct1008\_probe: initialized [2.622555] THERMAL EST: found 3 subdevs [2.622558] THERMAL EST num\_resources: 0 [2.622561] [THERMAL EST subdev 0] [2.622564] [THERMAL EST subdev 1] [2.622566] [THERMAL EST subdev 2] [2.622650] gk20a 17000000.gp10b: failed to allocate secure buffer -12 [2.622803] thermal thermal\_zone7: Registering thermal zone thermal\_zone7 fo r type thermal-fan-est [2.622805] THERMAL EST: thz register success. [2.622885] THERMAL EST: end of probe, return err: 0 [2.622930] tegra\_profiler: Branch: Dev [2.622932] tegra\_profiler: Version: 1.117 [2.622933] tegra\_profiler: Samples version: 41 [2.622934] tegra\_profiler: IO version: 22 [2.622938] armv8\_pmu: imp: 0x41, idcode: 0x1 [2.622940] armv8\_pmu: [0] arch: AA64 PmuV3 ARM CORTEX-A57, type: 5, ver: 0, pmu ver: 0x1 [2.622942] armv8\_pmu: imp: 0x4e, idcode: 0x1 [2.622944] armv8\_pmu: [1] arch: AA64 PmuV3 NVIDIA (Denver), type: 6, ver: 0 , pmu ver: 0x1 [2.622946] armv8\_pmu: imp: 0x4e, idcode: 0x1 [2.622948] armv8\_pmu: [2] arch: AA64 PmuV3 NVIDIA (Denver), type: 6, ver: 0 , pmu ver: 0x1 [2.622950] armv8\_pmu: imp: 0x41, idcode: 0x1 [2.622952] armv8\_pmu: [3] arch: AA64 PmuV3 ARM CORTEX-A57, type: 5, ver: 0, pmu ver: 0x1 [2.622954] armv8\_pmu: imp: 0x41, idcode: 0x1 [2.622955] armv8\_pmu: [4] arch: AA64 PmuV3 ARM CORTEX-A57, type: 5, ver: 0, pmu ver: 0x1 [2.622957] armv8\_pmu: imp: 0x41, idcode: 0x1 [2.622959] armv8\_pmu: [5] arch: AA64 PmuV3 ARM CORTEX-A57, type: 5, ver: 0, pmu ver: 0x1 [2.623062] tegra\_profiler: auth: init [2.625735] tegra-ahci 3507000.ahci-sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode [2.625742] tegra-ahci 3507000.ahci-sata: flags: 64bit ncq sntf pm led pmp p io slum part deso sadm apst [2.632326] scsi host0: tegra\_ahci [2.632548] scsi host1: tegra\_ahci [2.632665] ata1: SATA max UDMA/133 mmio [mem 0x03507000-0x03508fff] port 0x 100 irq 25 [2.632667] ata2: DUMMY [2.633422] spi-tegra114 3210000.spi: Static pin configuration used [2.633771] spi-tegra114 c260000.spi: Static pin configuration used [2.634088] spi-tegra114 3240000.spi: Static pin configuration used [2.634703] tun: Universal TUN/TAP device driver, 1.6 [2.634704] tun: (C) 1999-2004 Max Krasnyansky [maxk@qualcomm.com](mailto:maxk@qualcomm.com) [2.634847] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [2.634848] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [2.634882] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k [2.634883] igb: Copyright (c) 2007-2014 Intel Corporation. [2.635672] PPP generic driver version 2.4.2 [2.635765] PPP BSD Compression module registered [2.635771] PPP Deflate Compression module registered [2.635787] PPP MPPE Compression module registered [2.635798] NET: Registered protocol family 24 [2.635838] usbcore: registered new interface driver r8152 [2.635864] usbcore: registered new interface driver asix [2.635893] usbcore: registered new interface driver ax88179\_178a [2.635918] usbcore: registered new interface driver cdc\_ether [2.635945] usbcore: registered new interface driver smsc75xx [2.635968] usbcore: registered new interface driver net1080 [2.635990] usbcore: registered new interface driver cdc\_subset [2.636013] usbcore: registered new interface driver zaurus [2.636071] usbcore: registered new interface driver cdc\_ncm [2.636264] Wake76 for irq=199 [2.636266] Wake77 for irq=199 [2.636267] Wake78 for irq=199 [2.636268] Wake79 for irq=199 [2.636269] Wake80 for irq=199 [2.636269] Wake81 for irq=199 [2.636270] Wake82 for irq=199 [2.636322] tegra-xotg xotg: usb2 phy is not available yet [2.636796] usbcore: registered new interface driver cdc\_acm [2.636797] cdc\_acm: USB Abstract Control Model driver for USB modems and IS DN adapters [2.636837] usbcore: registered new interface driver usb-storage [2.636881] usbcore: registered new interface driver usbserial [2.636901] usbcore: registered new interface driver cp210x [2.636916] usbserial: USB Serial support registered for cp210x [2.636934] usbcore: registered new interface driver ftdi\_sio [2.636947] usbserial: USB Serial support registered for FTDI USB Serial Dev ice [2.636975] usbcore: registered new interface driver option [2.636989] usbserial: USB Serial support registered for GSM modem (1-port) [2.637011] usbcore: registered new interface driver pl2303 [2.637024] usbserial: USB Serial support registered for pl2303 [2.637272] tegra-usb-cd usb\_cd: otg phy is not available yet [2.638933] eqos 2490000.ether\_qos: Setting local MAC: 0 4 4b a7 ca fd [2.639363] libphy: dwc\_phy: probed [2.639790] tegra-xudc-new 3550000.xudc: usb2 phy is not available yet [2.704011] bcm54xx\_low\_power\_mode(): put phy in iddq-lp mode [2.763660] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [2.765869] tegra\_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [2.765883] tegra\_rtc c2a0000.rtc: Tegra internal Real Time Clock [2.766019] i2c /dev entries driver [2.766766] [OV5693]: probing v4l2 sensor. [2.950874] ata1: SATA link down (SStatus 0 SControl 300) [3.227864] tegradc 15210000.nvdisplay: fb registered [3.234625] PD DISP0 index2 UP [3.239843] PD DISP1 index3 UP [3.244409] PD DISP2 index4 UP [3.257564] hdmi: couldn’t get regulator avdd\_hdmi [3.264082] Parent Clock set for DC plld2 [3.270538] edid invalid [3.316048] edid invalid [3.319943] edid invalid [3.323822] tegradc 15210000.nvdisplay: hdmi: pclk:148351K, set prod-setting :prod\_c\_150M [3.479090] tegradc 15210000.nvdisplay: blank - normal [3.482892] tegradc 15210000.nvdisplay: blank - powerdown [3.541402] PD DISP2 index4 DOWN [3.542504] PD DISP1 index3 DOWN [3.543165] PD DISP0 index2 DOWN [3.577816] tegradc 15210000.nvdisplay: unblank [3.577894] PD DISP0 index2 UP [3.607456] PD DISP1 index3 UP [3.608352] PD DISP2 index4 UP [3.624598] hdmi: couldn’t get regulator avdd\_hdmi [3.624941] Parent Clock set for DC plld2 [3.628013] tegradc 15210000.nvdisplay: hdmi: pclk:148500K, set prod-setting :prod\_c\_150M [3.640085] gspca\_main: v2.14.0 registered [3.640126] usbcore: registered new interface driver gspca\_zc3xx [3.640451] max77620-power max77620-power: Event recorder REG\_NVERC : 0x0 [3.642405] FAN dev name: pwm-fan [3.642454] FAN:gpio request success. [3.642460] FAN: can’t find tach\_gpio [3.642484] pwm\_fan\_driver pwm-fan: cap state:7, cap pwm:255 [3.642650] pwm\_fan\_driver pwm-fan: got pwm for fan [3.642654] pwm\_fan\_driver pwm-fan: tach period: 1000 [3.642956] pwm\_fan\_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, s tate:2 [3.642959] pwm\_fan\_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2 [3.642962] pwm\_fan\_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1 , state:2 [3.642965] pwm\_fan\_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1 , state:2 [3.642968] pwm\_fan\_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1 , state:3 [3.642971] pwm\_fan\_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1 , state:3 [3.642974] pwm\_fan\_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1 , state:3 [3.642977] pwm\_fan\_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1 , state:4 [3.642980] pwm\_fan\_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd= 1, state:4 [3.642982] pwm\_fan\_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd= 1, state:4 [3.643729] device-mapper: uevent: version 1.0.3 [3.643920] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm- [devel@redhat.com](mailto:devel@redhat.com) [3.644306] sdhci: Secure Digital Host Controller Interface driver [3.644307] sdhci: Copyright(c) Pierre Ossman [3.644311] sdhci-pltfm: SDHCI platform and OF driver helper [3.644552] random: nonblocking pool is initialized [3.644607] sdhci-tegra 3460000.sdhci: Parent select= pll\_p rate=408000000 [3.644895] sdhci-tegra 3460000.sdhci: Parent select= pll\_c4\_out0 rate=19624 9804 [3.645124] sdhci-tegra 3460000.sdhci: Client registration for eMC Successfu l [3.646254] tegra-se-elp 3ad0000.se\_elp: tegra\_se\_elp\_probe: complete [3.646377] hidraw: raw HID events driver (C) Jiri Kosina [3.647927] usbcore: registered new interface driver usbhid [3.647929] usbhid: USB HID core driver [3.652761] nvadsp 2993000.adsp: in probe()… [3.666050] nvadsp 2993000.adsp: Registering AMC Error Interrupt [3.666078] nvadsp 2993000.adsp: AMC/ARAM initialized. [3.666265] nvadsp 2993000.adsp: nvadsp\_app\_module\_probe [3.666999] Denver: backdoor interface is NOT available. [3.668679] coresight-tmc 8030000.etf: TMC initialized [3.669768] coresight-tmc 8050000.etr: TMC initialized [3.670112] coresight-tpiu 8060000.tpiu: TPIU initialized [3.670580] coresight-funnel 9010000.funnel\_bccplex: FUNNEL initialized [3.671038] coresight-funnel 8010000.funnel\_major: FUNNEL initialized [3.671436] coresight-funnel 8820000.funnel\_minor: FUNNEL initialized [3.671844] coresight-replicator 8040000.replicator: REPLICATOR initialized [3.672429] coresight-etm4x 9840000.ptm: ETM 4.0 initialized [3.672946] coresight-etm4x 9940000.ptm: ETM 4.0 initialized [3.673460] coresight-etm4x 9a40000.ptm: ETM 4.0 initialized [3.673975] coresight-etm4x 9b40000.ptm: ETM 4.0 initialized [3.673999] Module initialized successfully [3.677058] tegra186-cam-rtcpu b000000.rtcpu: Trace buffer configured at IOV A=0xfc300000 [3.678251] tegra186-cam-rtcpu b000000.rtcpu: already unhalted [3.678338] tegra186-cam-rtcpu b000000.rtcpu: IOVM setup error: 131 [3.678341] tegra186-cam-rtcpu b000000.rtcpu: trace boot sync failed: -5 [3.678463] tegra-ivc ivc-b000000.rtcpu: region 0: iova=0xfc120000-0xfc12957 f size=38272 [3.678800] tegra-ivc ivc-b000000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]= 0x1000-0x1480 TX[16x64]=0x1480-0x1900 [3.678856] tegra-ivc ivc-b000000.rtcpu:vinotify@12c0: vinotify: ver=0 grp=1 RX[64x128]=0x1900-0x3980 TX[64x128]=0x3980-0x5a00 [3.678860] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using AD MA 64-bit with 64 bit addr [3.678901] tegra-ivc ivc-b000000.rtcpu:mods@32c0: mods: ver=0 grp=1 RX[1x64 ]=0x5a00-0x5ac0 TX[1x64]=0x5ac0-0x5b80 [3.678972] tegra-ivc ivc-b000000.rtcpu:ivccontrol@52c0: ivccontrol: ver=0 g rp=1 RX[16x320]=0x5b80-0x7000 TX[16x320]=0x7000-0x8480 [3.679012] tegra-ivc ivc-b000000.rtcpu:ivccapture@72c0: ivccapture: ver=0 g rp=1 RX[16x64]=0x8480-0x8900 TX[16x64]=0x8900-0x8d80 [3.679096] sdhci-tegra 3440000.sdhci: Parent select= pll\_p rate=408000000 [3.679099] tegra-ivc ivc-b000000.rtcpu:dbg@7c00: dbg: ver=0 grp=1 RX[1x384] =0x8d80-0x8f80 TX[1x384]=0x8f80-0x9180 [3.679139] tegra-ivc ivc-b000000.rtcpu:dbg@7e00: dbg: ver=0 grp=1 RX[1x384] =0x9180-0x9380 TX[1x384]=0x9380-0x9580 [3.679335] tegra186-cam-rtcpu b000000.rtcpu: using cam RTCPU IRQ (52) [3.679337] sdhci-tegra 3440000.sdhci: Client registration for eMC Successfu l [3.679338] tegra186-cam-rtcpu b000000.rtcpu: tegra\_camrtc\_mon\_create is suc cessful [3.680012] tegra186-cam-rtcpu b000000.rtcpu: IOVM setup error: 131 [3.680180] tegra186-cam-rtcpu b000000.rtcpu: ivc-bus boot sync failed: -5 [3.680188] tegra186-cam-rtcpu b000000.rtcpu: firmware version cpu=sce cmd=4 sha1=a8b1ecdd9615cd817a56df035be363fce3b0b88f [3.680417] camchar: rtcpu character device driver loaded [3.681794] arm-smmu 12000000.iommu: Unexpected {global,context} fault, this could be serious [3.681799] arm-smmu 12000000.iommu: GFSR 0x80000002, GFSYNR0 0x0000 0000, GFSYNR1 0x00001816, GFSYNR2 0x00000000 [3.681913] (255) csr\_aonr: EMEM address decode error [3.681932] status = 0x20367097; addr = 0x3ffffffc0 [3.681937] secure: yes, access-type: read [3.681952] unknown mcerr fault, int\_status=0x00000000, ch\_int\_status=0x0000 0000, hubc\_int\_status=0x00000000 [3.681963] unknown mcerr fault, int\_status=0x00000000, ch\_int\_status=0x0000 0000, hubc\_int\_status=0x00000000 [3.681973] unknown mcerr fault, int\_status=0x00000000, ch\_int\_status=0x0000 0000, hubc\_int\_status=0x00000000 [3.681981] mc-err: Too many MC errors; throttling prints [3.682289] tegra186-aondbg aondbg: aondbg driver probe() OK [3.682517] register\_ari\_mca\_banks: Registered MCA ROC:IOB [3.682608] register\_ari\_mca\_banks: Registered MCA ROC:CCE [3.682971] tegra18-bridge 2390000.axi2apb: bridge probed OK [3.682999] tegra18-bridge 23a0000.axi2apb: bridge probed OK [3.683023] tegra18-bridge 23b0000.axi2apb: bridge probed OK [3.683046] tegra18-bridge 23c0000.axi2apb: bridge probed OK [3.683069] tegra18-bridge 23d0000.axi2apb: bridge probed OK [3.683093] tegra18-bridge 2100000.axip2p: bridge probed OK [3.683115] tegra18-bridge 2110000.axip2p: bridge probed OK [3.683137] tegra18-bridge 2120000.axip2p: bridge probed OK [3.683159] tegra18-bridge 2130000.axip2p: bridge probed OK [3.683182] tegra18-bridge 2140000.axip2p: bridge probed OK [3.683203] tegra18-bridge 2150000.axip2p: bridge probed OK [3.683228] tegra18-bridge 2160000.axip2p: bridge probed OK [3.683251] tegra18-bridge 2170000.axip2p: bridge probed OK [3.683275] tegra18-bridge 2180000.axip2p: bridge probed OK [3.683314] tegra18-bridge 2190000.axip2p: bridge probed OK [3.683365] \*\*\*\* A57 ECC: Enabled [3.683367] tegra18\_a57\_serr\_init: on CPU 4 a A57 Core [3.683504] parse\_throttle\_dt\_data: Num cap clks = 4 [3.683506] parse\_throttle\_dt\_data: clk=mcpu type=1 [3.683508] parse\_throttle\_dt\_data: clk=bcpu type=2 [3.683513] parse\_throttle\_dt\_data: clk=gpu type=4 [3.683515] parse\_throttle\_dt\_data: clk=emc type=3 [3.683981] tegra\_throttle\_probe: probe successful. #cdevs=4 [3.684086] tegra18x\_actmon d230000.actmon: in actmon\_register()… [3.686569] tegra18x\_actmon d230000.actmon: initialization Completed for the device mc\_all [3.686883] hw perfevents: enabled with denver15\_uncore\_pmu PMU driver, 3 co unters available [3.688930] tegra-se-nvhost 15810000.se: initialized [3.689373] tegra-se-nvhost 15810000.se: tegra\_se\_probe: complete [3.689701] tegra-se-nvhost 15820000.se: initialized [3.690133] tegra-se-nvhost 15820000.se: tegra\_se\_probe: complete [3.690416] tegra-se-nvhost 15830000.se: initialized [3.690525] tegra-se-nvhost 15830000.se: tegra\_se\_probe: complete [3.690796] tegra-se-nvhost 15840000.se: initialized [3.691247] tegra-se-nvhost 15840000.se: tegra\_se\_probe: complete [3.695006] tegra-gpcdma 2600000.dma: GPC DMA driver register 32 channels [3.696921] arm-smmu 12000000.iommu: Unexpected {global,context} fault, this could be serious [3.696926] arm-smmu 12000000.iommu: GFSR 0x80000002, GFSYNR0 0x0000 0000, GFSYNR1 0x00001432, GFSYNR2 0x00000000 [3.696953] arm-smmu 12000000.iommu: Unexpected {global,context} fault, this could be serious [3.696957] arm-smmu 12000000.iommu: GFSR 0x00000002, GFSYNR0 0x0000 0000, GFSYNR1 0x00001432, GFSYNR2 0x00000000 [3.696989] arm-smmu 12000000.iommu: Unexpected {global,context} fault, this could be serious [3.696991] arm-smmu 12000000.iommu: GFSR 0x00000002, GFSYNR0 0x0000 0000, GFSYNR1 0x00001432, GFSYNR2 0x00000000 [3.697027] arm-smmu 12000000.iommu: Unexpected {global,context} fault, this could be serious [3.697029] arm-smmu 12000000.iommu: GFSR 0x00000002, GFSYNR0 0x0000 0000, GFSYNR1 0x00001432, GFSYNR2 0x00000000 [3.697062] arm-smmu 12000000.iommu: Unexpected {global,context} fault, this could be serious [3.697065] arm-smmu 12000000.iommu: GFSR 0x00000002, GFSYNR0 0x0000 0000, GFSYNR1 0x00001432, GFSYNR2 0x00000000 [3.697109] arm-smmu 12000000.iommu: Unexpected {global,context} fault, this could be serious [3.697112] arm-smmu 12000000.iommu: GFSR 0x80000002, GFSYNR0 0x0000 0002, GFSYNR1 0x00000032, GFSYNR2 0x00000000 [3.697206] arm-smmu 12000000.iommu: Unexpected {global,context} fault, this could be serious [3.697209] arm-smmu 12000000.iommu: GFSR 0x80000002, GFSYNR0 0x0000 0000, GFSYNR1 0x00001832, GFSYNR2 0x00000000 [3.697235] arm-smmu 12000000.iommu: Unexpected {global,context} fault, this could be serious [3.697237] arm-smmu 12000000.iommu: GFSR 0x00000002, GFSYNR0 0x0000 0000, GFSYNR1 0x00001832, GFSYNR2 0x00000000 [3.698806] cpufreq: platform driver Initialization: pass [3.699291] tegra\_cluster\_clk e090000.cluster\_clk\_priv: in probe()… [3.699481] tegra\_cluster\_clk e090000.cluster\_clk\_priv: passed [3.700091] tegra186-padctl 3520000.pinctrl: padctl mmio start 0x00000000035 20000 end 0x0000000003520fff [3.700115] tegra186-padctl 3520000.pinctrl: ao mmio start 0x000000000354000 0 end 0x0000000003540fff [3.700280] tegra186-padctl 3520000.pinctrl: FUSE\_SKU\_USB\_CALIB\_0 0x2ca895 [3.700293] tegra186-padctl 3520000.pinctrl: FUSE\_USB\_CALIB\_EXT\_0 0x8 [3.703793] tegra186-padctl 3520000.pinctrl: using UTMI port 0 for otg [3.706314] tegra186-padctl 3520000.pinctrl: VBUS over-current detection ena bled [3.708072] tegra-bpmp-thermal d000000.bpmp:bpmpthermal: zone 0 not supporte d [3.709217] tegra-bpmp-thermal d000000.bpmp:bpmpthermal: zone 3 not suppo [log.zip](https://forums.developer.nvidia.com/uploads/short-url/lHUKfYxPaM9Ikqw6kVeSBVbWZXE.zip) (41.3 KB) ---
**Author:** ![wawxh1101](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@wawxh1101](https://forums.developer.nvidia.com/u/wawxh1101)\ **Post date:** [November 1, 2018, 10:27am UTC](https://forums.developer.nvidia.com/t/tx2-hdmi-not-display/66823/7 "2018-11-01T10:27:59Z")
[0.000000] Booting Linux on physical CPU 0x100 [0.000000] Initializing cgroup subsys cpuset [0.000000] Initializing cgroup subsys cpu [0.000000] Initializing cgroup subsys cpuacct [0.000000] Linux version 4.4.38-tegra (buildbrain@mobile-u64-773) (gcc vers ion 4.8.5 (GCC) ) #1 SMP PREEMPT Thu May 17 00:15:19 PDT 2018 [0.000000] Boot CPU: AArch64 Processor [411fd073] [0.000000] earlycon: Early serial console at MMIO32 0x3100000 (options ‘’) [0.000000] bootconsole [uart0] enabled [0.000000] Found tegra\_fbmem2: 00800000@969ee000 [0.000000] Found lut\_mem2: 00002008@969eb000 [0.000000] Reserved memory: initialized node ramoops\_carveout, compatible i d nvidia,ramoops [0.000000] cma: Reserved 64 MiB at 0x00000000fc000000 [0.000000] On node 0 totalpages: 2052096 [0.000000] DMA zone: 8192 pages used for memmap [0.000000] DMA zone: 0 pages reserved [0.000000] DMA zone: 519680 pages, LIFO batch:31 [0.000000] Normal zone: 23968 pages used for memmap [0.000000] Normal zone: 1532416 pages, LIFO batch:31 [0.000000] psci: probing for conduit method from DT. [0.000000] psci: PSCIv1.0 detected in firmware. [0.000000] psci: Using standard PSCI v0.2 function IDs [0.000000] psci: MIGRATE\_INFO\_TYPE not supported. [0.000000] PERCPU: Embedded 17 pages/cpu @ffffffc1f5f9a000 s31360 r8192 d30 080 u69632 [0.000000] pcpu-alloc: s31360 r8192 d30080 u69632 alloc=17_4096 [0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pa ges: 2019936 [0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait console=tty S0,115200n8 console=tty0 OS=l4t fbcon=map:0 net.ifnames=0 memtype=0 video=tegra fb no\_console\_suspend=1 earlycon=uart8250,mmio32,0x03100000 nvdumper\_reserved=0 x2772e0000 gpt tegra\_fbmem2=0x800000@0x969ee000 lut\_mem2=0x2008@0x969eb000 tegr aid=18.1.2.0.0 tegra\_keep\_boot\_clocks maxcpus=6 boot.slot\_suffix= boot.ratchetv alues=0.2.1 androidboot.serialno=0324817094137 bl\_prof\_dataptr=0x10000@0x277040 000 sdhci\_tegra.en\_boot\_part\_access=1 root=/dev/mmcblk0p1 rw rootwait rootfstyp e=ext4 [0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 byt es) [0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes ) [0.000000] Memory: 7967768K/8208384K available (11296K kernel code, 1841K r wdata, 5796K rodata, 1168K init, 691K bss, 175080K reserved, 65536K cma-reserve d) [0.000000] Virtual kernel memory layout: vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000 ( 246 GB) vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum) 0xffffffbdc2000000 - 0xffffffbdc9da0000 ( 125 MB actual) fixed : 0xffffffbffa7fd000 - 0xffffffbffac00000 ( 4108 KB) PCI I/O : 0xffffffbffae00000 - 0xffffffbffbe00000 ( 16 MB) modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB) memory : 0xffffffc000000000 - 0xffffffc1f6800000 ( 8040 MB) .init : 0xffffffc001132000 - 0xffffffc001256000 ( 1168 KB) .text : 0xffffffc000080000 - 0xffffffc001132000 ( 17096 KB) .data : 0xffffffc001278000 - 0xffffffc001444730 ( 1842 KB) [0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [0.000000] Preemptible hierarchical RCU implementation. [0.000000] Build-time adjustment of leaf fanout to 64. [0.000000] RCU restricting CPUs from NR\_CPUS=64 to nr\_cpu\_ids=6. [0.000000] RCU: Adjusting geometry for rcu\_fanout\_leaf=64, nr\_cpu\_ids=6 [0.000000] NR\_IRQS:64 nr\_irqs:64 0 [0.000000] GIC: Using split EOI/Deactivate mode [0.000000] Architected cp15 timer(s) running at 31.25MHz (phys). [0.000000] clocksource: arch\_sys\_counter: mask: 0xffffffffffffff max\_cycles : 0xe6a171046, max\_idle\_ns: 881590405314 ns [0.000002] sched\_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398 046511088ns [0.009853] Console: colour dummy device 80x25 [0.014513] console [tty0] enabled [0.018070] bootconsole [uart0] disabled [0.022174] kmemleak: Kernel memory leak detector disabled [0.022186] Calibrating delay loop (skipped), value calculated using timer f requency… 62.50 BogoMIPS (lpj=125000) [0.022198] pid\_max: default: 32768 minimum: 301 [0.022247] Security Framework initialized [0.022285] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [0.022296] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 byt es) [0.022676] Initializing cgroup subsys io [0.022690] Initializing cgroup subsys memory [0.022706] Initializing cgroup subsys devices [0.022715] Initializing cgroup subsys freezer [0.022724] Initializing cgroup subsys net\_cls [0.022734] Initializing cgroup subsys perf\_event [0.022743] Initializing cgroup subsys net\_prio [0.022753] Initializing cgroup subsys pids [0.022762] Initializing cgroup subsys debug [0.022902] CPU0 ipc=752 [0.022911] CPU1 ipc=1024 [0.022919] CPU2 ipc=1024 [0.022928] CPU3 ipc=752 [0.022936] CPU4 ipc=752 [0.022946] CPU5 ipc=752 [0.022982] ASID allocator initialised with 65536 entries [0.046211] tegra-id: chipid=21817. [0.046229] tegra-id: opt\_subrevision=1. [0.046242] Tegra Revision: A02p SKU: 0xdc CPU Process: 0 SoC Process: 0 [0.046935] DTS File Name: /dvs/git/dirty/git-master\_linux/kernel/kernel-4.4 /arch/arm64/boot/dts/…/…/…/…/…/…/hardware/nvidia/platform/t18x/quill/kern el-dts/tegra186-quill-p3310-1000-c03-00-base.dts [0.046960] DTB Build time: May 17 2018 00:17:47 [0.062570] CPU1: Booted secondary processor [4e0f0030] [0.074127] CPU2: Booted secondary processor [4e0f0030] [0.085800] CPU3: Booted secondary processor [411fd073] [0.097815] CPU4: Booted secondary processor [411fd073] [0.109802] CPU5: Booted secondary processor [411fd073] [0.109865] Brought up 6 CPUs [0.109921] SMP: Total of 6 processors activated. [0.109933] CPU: All CPU(s) started at EL2 [0.110353] devtmpfs: initialized [0.137006] Initilizing CustomIPI irq domain [0.137204] clocksource: jiffies: mask: 0xffffffff max\_cycles: 0xffffffff, m ax\_idle\_ns: 7645041785100000 ns [0.137988] pinctrl core: initialized pinctrl subsystem [0.138165] OS set in device tree is not L4T. [0.138356] regulator-dummy: no parameters [0.138461] Initializing plugin-manager [0.138514] Plugin module not found [0.138934] node /plugin-manager/soc-prod-a02-fragment match with chip-id A0 2P [0.139275] node /plugin-manager/fragement@0 match with odm-data enable-denv er-wdt [0.139900] node /plugin-manager/fragement@4 match with odm-data enable-denv er-wdt [0.141089] node /plugin-manager/fragment-sdwake-p3310-1000-300 match with b oard \>=3310-1000-300 [0.141465] node /plugin-manager/fragement-pmon-p3310-1000-300 match with bo ard \>=3310-1000-300 [0.141728] node /plugin-manager/fragement-pmon-p3310-1000-800 match with bo ard \>=3310-1000-800 [0.141952] node /plugin-manager/fragment-devslp@0 match with board \>=3310-1 000-200 [0.142383] node /plugin-manager/fragment-500-pcie-config match with board \> =3310-1000-500 [0.142837] node /plugin-manager/fragment-500-xusb-config match with board \> =3310-1000-500 [0.143118] node /plugin-manager/fragment-500-e3325-pcie match with board \>= 3310-1000-500 [0.143508] node /plugin-manager/fragment-p3310-c00-comm match with board \>= 3310-1000-800 [0.143758] node /plugin-manager/fragment-p3310-c00-pmic match with board \>= 3310-1000-800 [0.143984] node /plugin-manager/fragment-p3310-c01 match with board \>=3310- 1000-900 [0.144246] node /plugin-manager/fragment-p3310-c03 match with board \>=3310- 1000-B00 [0.145857] node /plugin-manager/fragment-e3326@0 match with board 3326-_ [0.146966] node /plugin-manager/fragment-p3310-c00-camera match with board > =3310-1000-800 > [0.148791] Adding domain adsp-pd to PM domain ape-pd > [0.151185] NET: Registered protocol family 16 > [0.152031] console [pstore-1] enabled > [0.152044] pstore: Registered ramoops as persistent store backend > [0.152057] ramoops: attached 0x200000@0x277080000, ecc: 0/0 > [0.161352] cpuidle: using governor ladder > [0.165800] cpuidle: using governor menu > [0.166935] bpmp: waiting for handshake > [0.166950] bpmp: handshake completed > [0.166990] bpmp: synchronizing channels > [0.167019] bpmp: channels synchronized > [0.167030] bpmp: mail init ok > [0.167394] vdso: 2 pages (1 code @ ffffffc00127d000, 1 data @ ffffffc00127c 1. [0.167427] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [0.168370] atomic\_pool\_init():526: DMA: preallocated 1024 KiB pool for atom ic allocations [0.169808] tegra\_powergate\_init: DONE [0.169829] DTS File Name: /dvs/git/dirty/git-master\_linux/kernel/kernel-4.4 /arch/arm64/boot/dts/…/…/…/…/…/…/hardware/nvidia/platform/t18x/quill/kern el-dts/tegra186-quill-p3310-1000-c03-00-base.dts [0.169856] DTB Build time: May 17 2018 00:17:47 [0.170795] Tegra reboot handler registered. [0.171863] Registering Tegra186 clocks (this may take a while)…done [0.174008] arm-smmu 12000000.iommu: probing hardware configuration… [0.174026] arm-smmu 12000000.iommu: SMMUv2 with: [0.174040] arm-smmu 12000000.iommu: stage 1 translation [0.174052] arm-smmu 12000000.iommu: stage 2 translation [0.174064] arm-smmu 12000000.iommu: nested translation [0.174078] arm-smmu 12000000.iommu: stream matching with 128 regist er groups, mask 0x7f80 [0.174097] arm-smmu 12000000.iommu: SMMU address space size (0x800000) diff ers from mapped region size (0x1000000)! [0.174116] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 onl y) [0.174130] arm-smmu 12000000.iommu: Stage-1: 39-bit VA → 48-bit IP A [0.174143] arm-smmu 12000000.iommu: Stage-2: 39-bit IPA → 48-bit P A [0.192687] /iommu@12000000: could not get #stream-id-cells for /pcie-contro ller@10003000 [0.192706] arm-smmu 12000000.iommu: registered 40 master devices [0.195316] iommu: Adding device 3460000.sdhci to group 0 [0.195764] iommu: Adding device 3400000.sdhci to group 1 [0.202174] iommu: Adding device 2490000.ether\_qos to group 2 [0.203396] Wake73 for irq=42 [0.203581] iommu: Adding device smmu\_test to group 3 [0.203961] mc: mapped MMIO address: 0xffffff8000560000 → 0x2c10000 [0.203983] mc: mapped MMIO address: 0xffffff8000640000 → 0x2c20000 [0.204002] mc: mapped MMIO address: 0xffffff8000660000 → 0x2c30000 [0.204021] mc: mapped MMIO address: 0xffffff8000fa0000 → 0x2c40000 [0.204042] mc: mapped MMIO address: 0xffffff8000fc0000 → 0x2c50000 [0.204061] mc-err: Set intmask: 0xf3140 [0.204204] ecc-err: dram ecc disabled-MC\_ECC\_CONTROL:0x0000000c [0.204804] Wake76 for irq=199 [0.204817] Wake77 for irq=199 [0.204827] Wake78 for irq=199 [0.204837] Wake79 for irq=199 [0.204846] Wake80 for irq=199 [0.204856] Wake81 for irq=199 [0.204865] Wake82 for irq=199 [0.204933] iommu: Adding device 3530000.xhci to group 4 [0.205197] iommu: Adding device 3550000.xudc to group 5 [0.205710] tegra-pmc c360000.pmc: scratch reg offset dts data not present [0.205726] tegra-pmc: ### PMC reset source: Power on reset [0.205738] tegra-pmc: ### PMC reset level: L0 [0.205748] tegra-pmc: ### PMC reset status reg: 0x0 [0.205905] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl register ed [0.205925] tegra-pmc c360000.pmc: IO padctrl driver initialized [0.206025] tegra186-aowake c370000.pmc: WAKE\_AOWAKE\_CTRL\_0 = 3 [0.206041] tegra186-aowake c370000.pmc: WAKE\_AOWAKE\_CNTRL\_24(PMU\_INT) = 320 [0.206364] iommu: Adding device 13e10000.host1x to group 6 [0.206508] iommu: Adding device 13e10000.host1x:ctx0 to group 7 [0.206667] iommu: Adding device 13e10000.host1x:ctx1 to group 8 [0.206813] iommu: Adding device 13e10000.host1x:ctx2 to group 9 [0.206959] iommu: Adding device 13e10000.host1x:ctx3 to group 10 [0.207112] iommu: Adding device 13e10000.host1x:ctx4 to group 11 [0.207257] iommu: Adding device 13e10000.host1x:ctx5 to group 12 [0.207405] iommu: Adding device 13e10000.host1x:ctx6 to group 13 [0.207558] iommu: Adding device 13e10000.host1x:ctx7 to group 14 [0.207862] iommu: Adding device 150c0000.nvcsi to group 15 [0.208270] iommu: Adding device 15700000.vi to group 16 [0.208498] iommu: Adding device 15600000.isp to group 17 [0.208727] iommu: Adding device 15210000.nvdisplay to group 18 [0.208806] platform 15210000.nvdisplay: IOVA linear map 0x00000000969ee000( 800000) [0.208827] platform 15210000.nvdisplay: IOVA linear map 0x00000000969eb000( 3000) [0.208943] iommu: Adding device 15340000.vic to group 19 [0.209081] iommu: Adding device 154c0000.nvenc to group 20 [0.209206] iommu: Adding device 15480000.nvdec to group 21 [0.209449] iommu: Adding device 15380000.nvjpg to group 22 [0.209577] iommu: Adding device 15500000.tsec to group 23 [0.209708] iommu: Adding device 15100000.tsecb to group 24 [0.210227] iommu: Adding device 15810000.se to group 25 [0.210357] iommu: Adding device 15820000.se to group 26 [0.210489] iommu: Adding device 15830000.se to group 27 [0.210760] iommu: Adding device 15840000.se to group 28 [0.211991] iommu: Adding device 17000000.gp10b to group 29 [0.214845] tegra-reset 5000000.clock: registered 193 resets. [0.217659] bpmp: ping status is 0 [0.217954] arm-smmu 12000000.iommu: Unexpected {global,context} fault, this could be serious [0.217979] arm-smmu 12000000.iommu: GFSR 0x80000002, GFSYNR0 0x0000 0000, GFSYNR1 0x00001432, GFSYNR2 0x00000000 [0.218046] bpmp d000000.bpmp: firmware tag is [0.218097] (255) csw\_bpmpw: MC request violates VPR requirements [0.218111] status = 0x00337094; addr = 0x3ffffffc0 [0.218144] secure: yes, access-type: write [0.218159] unknown mcerr fault, int\_status=0x00000000, ch\_int\_status=0x0000 0000, hubc\_int\_status=0x00000000 [0.218186] unknown mcerr fault, int\_status=0x00000000, ch\_int\_status=0x0000 0000, hubc\_int\_status=0x00000000 [0.218196] unknown mcerr fault, int\_status=0x00000000, ch\_int\_status=0x0000 0000, hubc\_int\_status=0x00000000 [0.218206] mc-err: Too many MC errors; throttling prints [0.218697] bpmp d000000.bpmp: probe ok [0.222631] GPIO line 461 (cam0-rst) hogged as output/low [0.222691] GPIO line 456 (cam0-pwdn) hogged as output/low [0.222760] GPIO line 457 (cam1-rst) hogged as output/low [0.222807] GPIO line 426 (cam1-pwdn) hogged as output/low [0.222866] GPIO line 424 (wifi-enable) hogged as output/high [0.222915] GPIO line 445 (sdmmc-wake-input) hogged as input [0.222965] GPIO line 446 (sdmmc-wake-output) hogged as output/low [0.223089] gpiochip\_add\_data: registered GPIOs 320 to 511 on device: tegra- gpio [0.224949] GPIO line 315 (wifi-wake-ap) hogged as input [0.225048] gpiochip\_add\_data: registered GPIOs 256 to 319 on device: tegra- gpio-aon [0.226084] iommu: Adding device sound to group 30 [0.227939] iommu: Adding device 3510000.hda to group 31 [0.229106] iommu: Adding device adsp\_audio to group 32 [0.230578] iommu: Adding device 2993000.adsp to group 33 [0.240353] vdd-ac-bat: 5000 mV [0.243111] vdd-1v8-ap: 1800 mV [0.260758] SCSI subsystem initialized [0.260979] libata version 3.00 loaded. [0.261156] usbcore: registered new interface driver usbfs [0.261219] usbcore: registered new interface driver hub [0.261343] usbcore: registered new device driver usb [0.265497] GPIO line 241 (touch-rail-1) hogged as output/high [0.265951] GPIO line 242 (touch-rail-2) hogged as output/high [0.266067] gpiochip\_add\_data: registered GPIOs 240 to 255 on device: tca953 9 [0.267509] GPIO line 228 (lcd-bias-en-rail) hogged as output/high [0.267633] gpiochip\_add\_data: registered GPIOs 224 to 239 on device: tca953 9 [0.278585] media: Linux media interface: v0.10 [0.278693] Linux video capture interface: v2.00 [0.281784] pps\_core: LinuxPPS API ver. 1 registered [0.281824] pps\_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giom etti [giometti@linux.it](mailto:giometti@linux.it) [0.281883] PTP clock support registered [0.282914] tegra\_wdt\_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 se c [0.282990] tegra\_wdt\_t18x 30c0000.watchdog: Registered successfully [0.284565] max77620 4-003c: PMIC Version OTP:0x45 and ES:0x8 [0.286629] GPIO line 221 (spmic\_gpio\_input\_5) hogged as input [0.286852] GPIO line 222 (spmic\_gpio\_input\_6) hogged as input [0.286971] gpiochip\_add\_data: registered GPIOs 216 to 223 on device: max776 20-gpio [0.294752] vddio-ddr: at 1125 mV [0.298585] avdd\_dsi\_csi: 1200 mV [0.302598] vdd-1v8: 1800 mV [0.306592] vdd-3v3-sys: 3300 mV [0.307725] spmic-ldo0: at 1800 mV [0.308576] spmic-ldo1: at 800 mV [0.314582] vddio-3v3: 3300 mV [0.315215] vddio-sdmmc1: 1800 ↔ 3300 mV at 3300 mV [0.317349] vdd-rtc: at 800 mV [0.318044] avdd-ts-hv: 1800 ↔ 3300 mV at 1800 mV [0.321348] spmic-ldo6: at 1500 mV [0.325347] vdd-pex-1v05: 1000 mV [0.325894] dvdd-pex: 1000 mV [0.326148] max77620 4-003c: max77620 probe successful [0.326403] Advanced Linux Sound Architecture Driver Initialized. [0.327356] en-vdd-sd: 3300 mV [0.327954] en-vdd-cam: 1800 mV [0.329803] vdd-hdmi: 5000 mV [0.329985] vdd-usb0-5v: 5000 mV [0.330155] vdd-usb1-5v: 5000 mV [0.333803] en-vdd-ts-1v8: 1800 mV [0.337802] en-vdd-ts-hv-3v3: 3300 mV [0.338321] en-vdd-disp-3v3: 3300 mV [0.338830] en-mdm-pwr-3v7: 3700 mV [0.339346] en-vdd-disp-1v8: 1800 mV [0.339881] en-vdd-cam-hv-2v8: 2800 mV [0.340405] en-vdd-cam-1v2: 1200 mV [0.340930] vdd-fan: 5000 mV [0.341041] vdd-3v3: 3300 mV [0.341771] dis-vdd-1v2: 1200 mV [0.341893] en-vdd-vcm-2v8: 2800 mV [0.342429] vdd-usb2-5v: 5000 mV [0.342539] vdd-sys-bl: 3300 mV [0.343067] en-vdd-sys: 1200 mV [0.346429] extcon-gpio-states external-connection:extcon@1: Cable state 0 [0.346850] clocksource: Switched to clocksource arch\_sys\_counter [0.365072] nvmap\_heap\_init: nvmap\_heap\_init: created heap block cache [0.365355] nvmap: nvmap\_override\_cache\_ops() set roc flush ops to replace c ache ops by set/ways [0.365848] nvmap\_page\_pool\_init: Total RAM pages: 2008326 [0.365866] nvmap\_page\_pool\_init: nvmap page pool size: 251040 pages (980 MB ) [0.366098] nvmap\_background\_zero\_thread: PP zeroing thread starting. [0.370553] Wake76 for irq=199 [0.370567] Wake77 for irq=199 [0.370578] Wake78 for irq=199 [0.370589] Wake79 for irq=199 [0.370599] Wake80 for irq=199 [0.370609] Wake81 for irq=199 [0.370618] Wake82 for irq=199 [0.371388] thermal thermal\_zone0: Registering thermal zone thermal\_zone0 fo r type BCPU-therm [0.371583] thermal thermal\_zone1: Registering thermal zone thermal\_zone1 fo r type MCPU-therm [0.371973] thermal thermal\_zone2: Registering thermal zone thermal\_zone2 fo r type GPU-therm [0.372052] thermal thermal\_zone3: Registering thermal zone thermal\_zone3 fo r type PLL-therm [0.372197] thermal thermal\_zone4: Registering thermal zone thermal\_zone4 fo r type Tboard\_tegra [0.372340] thermal thermal\_zone5: Registering thermal zone thermal\_zone5 fo r type Tdiode\_tegra [0.372487] thermal thermal\_zone6: Registering thermal zone thermal\_zone6 fo r type PMIC-Die [0.372778] isomgr\_init(): iso emc max clk=1866000KHz [0.372791] isomgr\_init(): max\_iso\_bw=26870400KB [0.372875] NET: Registered protocol family 2 [0.373185] TCP established hash table entries: 65536 (order: 7, 524288 byte s) [0.373415] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [0.373714] TCP: Hash tables configured (established 65536 bind 65536) [0.373772] UDP hash table entries: 4096 (order: 5, 131072 bytes) [0.373826] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [0.373994] NET: Registered protocol family 1 [0.374192] RPC: Registered named UNIX socket transport module. [0.374208] RPC: Registered udp transport module. [0.374220] RPC: Registered tcp transport module. [0.374231] RPC: Registered tcp NFSv4.1 backchannel transport module. [0.374252] PCI: CLS 0 bytes, default 128 [0.374347] Trying to unpack rootfs image as initramfs… [0.388061] host1x 13e10000.host1x: initialized [0.388915] hw perfevents: enabled with armv8\_pmuv3 PMU driver, 7 counters a vailable [0.390786] futex hash table entries: 2048 (order: 6, 262144 bytes) [0.390947] audit: initializing netlink subsys (disabled) [0.390980] audit: type=2000 audit(0.380:1): initialized [0.397778] io scheduler noop registered [0.397886] io scheduler cfq registered (default) [0.400766] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [0.401934] tegra-pwm 3290000.pwm: PWM clk can sleep in ops [0.402994] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [0.404039] tegra-pwm c340000.pwm: PWM clk can sleep in ops [0.407487] tsec 15500000.tsec: initialized [0.408609] tsec 15100000.tsecb: initialized [0.410930] nvdec 15480000.nvdec: initialized [0.414550] falcon 15340000.vic: initialized [0.415548] falcon 154c0000.nvenc: initialized [0.416532] falcon 15380000.nvjpg: initialized [0.417287] iommu\_context\_dev 13e10000.host1x:ctx0: initialized (streamid=56 ) [0.417786] iommu\_context\_dev 13e10000.host1x:ctx1: initialized (streamid=57 ) [0.418278] iommu\_context\_dev 13e10000.host1x:ctx2: initialized (streamid=58 ) [0.418772] iommu\_context\_dev 13e10000.host1x:ctx3: initialized (streamid=59 ) [0.419284] iommu\_context\_dev 13e10000.host1x:ctx4: initialized (streamid=60 ) [0.419782] iommu\_context\_dev 13e10000.host1x:ctx5: initialized (streamid=61 ) [0.420273] iommu\_context\_dev 13e10000.host1x:ctx6: initialized (streamid=62 ) [0.420762] iommu\_context\_dev 13e10000.host1x:ctx7: initialized (streamid=63 ) [0.423332] DC OR NODE connected to /host1x/sor1 [0.423457] generic\_infoframe\_type: 0x87 [0.423468] tegra\_camera\_platform tegra-camera-platform: tegra\_camera\_probe: camera\_platform\_driver probe [0.423562] misc tegra\_camera\_ctrl: tegra\_camera\_isomgr\_register tpg\_max\_iso = 3916800KBs [0.423577] tegradc 15210000.nvdisplay: DT parsed successfully [0.423593] misc tegra\_camera\_ctrl: tegra\_camera\_isomgr\_register isp\_iso\_bw= 4687500, vi\_iso\_bw=1500000, max\_bw=4687500 [0.423609] tegradc 15210000.nvdisplay: Display dc.ffffff8002320000 register ed with id=0 [0.431174] tegra\_nvdisp\_bandwidth\_register\_max\_config: max config iso bw = 16727000 KB/s [0.431196] tegra\_nvdisp\_bandwidth\_register\_max\_config: max config EMC floor = 665600000 Hz [0.431213] tegra\_nvdisp\_bandwidth\_register\_max\_config: max config hubclk = 357620000 Hz [0.431261] tegradc 15210000.nvdisplay: vblank syncpt # 7 for dc 1 [0.431277] tegradc 15210000.nvdisplay: vpulse3 syncpt # 8 for dc 1 [0.431505] tegra-adma 2930000.adma: Tegra ADMA driver register 10 channels [0.431673] hdmi: couldn’t get regulator vdd\_hdmi\_5v0: -517 [0.432173] tegradc 15210000.nvdisplay: Bootloader disp\_param detected. Dete cted mode: 1920x1080 (on 0x0mm) pclk=148350937 [0.433941] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initi alized [0.434275] kfuse 3830000.kfuse: initialized [0.434282] tegradc 15210000.nvdisplay: hdmi: no prod\_list\_hdmi\_board, use d efault range [0.435654] tegradc 15210000.nvdisplay: probed [0.436104] tegra-pmc-iopower pmc-iopower: NO\_IOPOWER setting 0x0 [0.436567] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [0.438477] console [ttyS0] disabled [0.438530] 3100000.serial: ttyS0 at MMIO 0x3100000 (irq = 37, base\_baud = 2 5500000) is a Tegra [2.531569] console [ttyS0] enabled [2.533744] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 38, base\_baud = 0) is a TEGRA\_UART [2.534887] c280000.serial: ttyTHS2 at MMIO 0xc280000 (irq = 39, base\_baud = 0) is a TEGRA\_UART [2.535129] serial-tegra 3130000.serial: RX in PIO mode [2.536132] 3130000.serial: ttyTHS3 at MMIO 0x3130000 (irq = 40, base\_baud = 0) is a TEGRA\_UART [2.546427] Console: switching to colour frame buffer device 240x67 [2.547895] brd: module loaded [2.553004] loop: module loaded [2.553234] nct1008\_nct72 7-004c: find device tree node, parsing dt [2.553238] nct1008\_nct72 7-004c: starting parse dt [2.553319] nct1008\_nct72 7-004c: success parsing dt [2.553440] nct1008\_nct72 7-004c: success in enabling tmp451 VDD rail [2.620405] tmp451: Enabled overheat logging at 104.00C [2.620492] nct1008\_nct72 7-004c: nct1008\_probe: initialized [2.622555] THERMAL EST: found 3 subdevs [2.622558] THERMAL EST num\_resources: 0 [2.622561] [THERMAL EST subdev 0] [2.622564] [THERMAL EST subdev 1] [2.622566] [THERMAL EST subdev 2] [2.622650] gk20a 17000000.gp10b: failed to allocate secure buffer -12 [2.622803] thermal thermal\_zone7: Registering thermal zone thermal\_zone7 fo r type thermal-fan-est [2.622805] THERMAL EST: thz register success. [2.622885] THERMAL EST: end of probe, return err: 0 [2.622930] tegra\_profiler: Branch: Dev [2.622932] tegra\_profiler: Version: 1.117 [2.622933] tegra\_profiler: Samples version: 41 [2.622934] tegra\_profiler: IO version: 22 [2.622938] armv8\_pmu: imp: 0x41, idcode: 0x1 [2.622940] armv8\_pmu: [0] arch: AA64 PmuV3 ARM CORTEX-A57, type: 5, ver: 0, pmu ver: 0x1 [2.622942] armv8\_pmu: imp: 0x4e, idcode: 0x1 [2.622944] armv8\_pmu: [1] arch: AA64 PmuV3 NVIDIA (Denver), type: 6, ver: 0 , pmu ver: 0x1 [2.622946] armv8\_pmu: imp: 0x4e, idcode: 0x1 [2.622948] armv8\_pmu: [2] arch: AA64 PmuV3 NVIDIA (Denver), type: 6, ver: 0 , pmu ver: 0x1 [2.622950] armv8\_pmu: imp: 0x41, idcode: 0x1 [2.622952] armv8\_pmu: [3] arch: AA64 PmuV3 ARM CORTEX-A57, type: 5, ver: 0, pmu ver: 0x1 [2.622954] armv8\_pmu: imp: 0x41, idcode: 0x1 [2.622955] armv8\_pmu: [4] arch: AA64 PmuV3 ARM CORTEX-A57, type: 5, ver: 0, pmu ver: 0x1 [2.622957] armv8\_pmu: imp: 0x41, idcode: 0x1 [2.622959] armv8\_pmu: [5] arch: AA64 PmuV3 ARM CORTEX-A57, type: 5, ver: 0, pmu ver: 0x1 [2.623062] tegra\_profiler: auth: init [2.625735] tegra-ahci 3507000.ahci-sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode [2.625742] tegra-ahci 3507000.ahci-sata: flags: 64bit ncq sntf pm led pmp p io slum part deso sadm apst [2.632326] scsi host0: tegra\_ahci [2.632548] scsi host1: tegra\_ahci [2.632665] ata1: SATA max UDMA/133 mmio [mem 0x03507000-0x03508fff] port 0x 100 irq 25 [2.632667] ata2: DUMMY [2.633422] spi-tegra114 3210000.spi: Static pin configuration used [2.633771] spi-tegra114 c260000.spi: Static pin configuration used [2.634088] spi-tegra114 3240000.spi: Static pin configuration used [2.634703] tun: Universal TUN/TAP device driver, 1.6 [2.634704] tun: (C) 1999-2004 Max Krasnyansky [maxk@qualcomm.com](mailto:maxk@qualcomm.com) [2.634847] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [2.634848] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [2.634882] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k [2.634883] igb: Copyright (c) 2007-2014 Intel Corporation. [2.635672] PPP generic driver version 2.4.2 [2.635765] PPP BSD Compression module registered [2.635771] PPP Deflate Compression module registered [2.635787] PPP MPPE Compression module registered [2.635798] NET: Registered protocol family 24 [2.635838] usbcore: registered new interface driver r8152 [2.635864] usbcore: registered new interface driver asix [2.635893] usbcore: registered new interface driver ax88179\_178a [2.635918] usbcore: registered new interface driver cdc\_ether [2.635945] usbcore: registered new interface driver smsc75xx [2.635968] usbcore: registered new interface driver net1080 [2.635990] usbcore: registered new interface driver cdc\_subset [2.636013] usbcore: registered new interface driver zaurus [2.636071] usbcore: registered new interface driver cdc\_ncm [2.636264] Wake76 for irq=199 [2.636266] Wake77 for irq=199 [2.636267] Wake78 for irq=199 [2.636268] Wake79 for irq=199 [2.636269] Wake80 for irq=199 [2.636269] Wake81 for irq=199 [2.636270] Wake82 for irq=199 [2.636322] tegra-xotg xotg: usb2 phy is not available yet [2.636796] usbcore: registered new interface driver cdc\_acm [2.636797] cdc\_acm: USB Abstract Control Model driver for USB modems and IS DN adapters [2.636837] usbcore: registered new interface driver usb-storage [2.636881] usbcore: registered new interface driver usbserial [2.636901] usbcore: registered new interface driver cp210x [2.636916] usbserial: USB Serial support registered for cp210x [2.636934] usbcore: registered new interface driver ftdi\_sio [2.636947] usbserial: USB Serial support registered for FTDI USB Serial Dev ice [2.636975] usbcore: registered new interface driver option [2.636989] usbserial: USB Serial support registered for GSM modem (1-port) [2.637011] usbcore: registered new interface driver pl2303 [2.637024] usbserial: USB Serial support registered for pl2303 [2.637272] tegra-usb-cd usb\_cd: otg phy is not available yet [2.638933] eqos 2490000.ether\_qos: Setting local MAC: 0 4 4b a7 ca fd [2.639363] libphy: dwc\_phy: probed [2.639790] tegra-xudc-new 3550000.xudc: usb2 phy is not available yet [2.704011] bcm54xx\_low\_power\_mode(): put phy in iddq-lp mode [2.763660] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [2.765869] tegra\_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [2.765883] tegra\_rtc c2a0000.rtc: Tegra internal Real Time Clock [2.766019] i2c /dev entries driver [2.766766] [OV5693]: probing v4l2 sensor. [2.950874] ata1: SATA link down (SStatus 0 SControl 300) [3.227864] tegradc 15210000.nvdisplay: fb registered [3.234625] PD DISP0 index2 UP [3.239843] PD DISP1 index3 UP [3.244409] PD DISP2 index4 UP [3.257564] hdmi: couldn’t get regulator avdd\_hdmi [3.264082] Parent Clock set for DC plld2 [3.270538] edid invalid [3.316048] edid invalid [3.319943] edid invalid [3.323822] tegradc 15210000.nvdisplay: hdmi: pclk:148351K, set prod-setting :prod\_c\_150M [3.479090] tegradc 15210000.nvdisplay: blank - normal [3.482892] tegradc 15210000.nvdisplay: blank - powerdown [3.541402] PD DISP2 index4 DOWN [3.542504] PD DISP1 index3 DOWN [3.543165] PD DISP0 index2 DOWN [3.577816] tegradc 15210000.nvdisplay: unblank [3.577894] PD DISP0 index2 UP [3.607456] PD DISP1 index3 UP [3.608352] PD DISP2 index4 UP [3.624598] hdmi: couldn’t get regulator avdd\_hdmi [3.624941] Parent Clock set for DC plld2 [3.628013] tegradc 15210000.nvdisplay: hdmi: pclk:148500K, set prod-setting :prod\_c\_150M [3.640085] gspca\_main: v2.14.0 registered [3.640126] usbcore: registered new interface driver gspca\_zc3xx [3.640451] max77620-power max77620-power: Event recorder REG\_NVERC : 0x0 [3.642405] FAN dev name: pwm-fan [3.642454] FAN:gpio request success. [3.642460] FAN: can’t find tach\_gpio [3.642484] pwm\_fan\_driver pwm-fan: cap state:7, cap pwm:255 [3.642650] pwm\_fan\_driver pwm-fan: got pwm for fan [3.642654] pwm\_fan\_driver pwm-fan: tach period: 1000 [3.642956] pwm\_fan\_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, s tate:2 [3.642959] pwm\_fan\_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2 [3.642962] pwm\_fan\_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1 , state:2 [3.642965] pwm\_fan\_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1 , state:2 [3.642968] pwm\_fan\_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1 , state:3 [3.642971] pwm\_fan\_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1 , state:3 [3.642974] pwm\_fan\_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1 , state:3 [3.642977] pwm\_fan\_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1 , state:4 [3.642980] pwm\_fan\_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd= 1, state:4 [3.642982] pwm\_fan\_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd= 1, state:4 [3.643729] device-mapper: uevent: version 1.0.3 [3.643920] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm- [devel@redhat.com](mailto:devel@redhat.com) [3.644306] sdhci: Secure Digital Host Controller Interface driver [3.644307] sdhci: Copyright(c) Pierre Ossman [3.644311] sdhci-pltfm: SDHCI platform and OF driver helper [3.644552] random: nonblocking pool is initialized [3.644607] sdhci-tegra 3460000.sdhci: Parent select= pll\_p rate=408000000 [3.644895] sdhci-tegra 3460000.sdhci: Parent select= pll\_c4\_out0 rate=19624 9804 [3.645124] sdhci-tegra 3460000.sdhci: Client registration for eMC Successfu l [3.646254] tegra-se-elp 3ad0000.se\_elp: tegra\_se\_elp\_probe: complete [3.646377] hidraw: raw HID events driver (C) Jiri Kosina [3.647927] usbcore: registered new interface driver usbhid [3.647929] usbhid: USB HID core driver [3.652761] nvadsp 2993000.adsp: in probe()… [3.666050] nvadsp 2993000.adsp: Registering AMC Error Interrupt [3.666078] nvadsp 2993000.adsp: AMC/ARAM initialized. [3.666265] nvadsp 2993000.adsp: nvadsp\_app\_module\_probe [3.666999] Denver: backdoor interface is NOT available. [3.668679] coresight-tmc 8030000.etf: TMC initialized [3.669768] coresight-tmc 8050000.etr: TMC initialized [3.670112] coresight-tpiu 8060000.tpiu: TPIU initialized [3.670580] coresight-funnel 9010000.funnel\_bccplex: FUNNEL initialized [3.671038] coresight-funnel 8010000.funnel\_major: FUNNEL initialized [3.671436] coresight-funnel 8820000.funnel\_minor: FUNNEL initialized [3.671844] coresight-replicator 8040000.replicator: REPLICATOR initialized [3.672429] coresight-etm4x 9840000.ptm: ETM 4.0 initialized [3.672946] coresight-etm4x 9940000.ptm: ETM 4.0 initialized [3.673460] coresight-etm4x 9a40000.ptm: ETM 4.0 initialized [3.673975] coresight-etm4x 9b40000.ptm: ETM 4.0 initialized [3.673999] Module initialized successfully [3.677058] tegra186-cam-rtcpu b000000.rtcpu: Trace buffer configured at IOV A=0xfc300000 [3.678251] tegra186-cam-rtcpu b000000.rtcpu: already unhalted [3.678338] tegra186-cam-rtcpu b000000.rtcpu: IOVM setup error: 131 [3.678341] tegra186-cam-rtcpu b000000.rtcpu: trace boot sync failed: -5 [3.678463] tegra-ivc ivc-b000000.rtcpu: region 0: iova=0xfc120000-0xfc12957 f size=38272 [3.678800] tegra-ivc ivc-b000000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]= 0x1000-0x1480 TX[16x64]=0x1480-0x1900 [3.678856] tegra-ivc ivc-b000000.rtcpu:vinotify@12c0: vinotify: ver=0 grp=1 RX[64x128]=0x1900-0x3980 TX[64x128]=0x3980-0x5a00 [3.678860] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using AD MA 64-bit with 64 bit addr [3.678901] tegra-ivc ivc-b000000.rtcpu:mods@32c0: mods: ver=0 grp=1 RX[1x64 ]=0x5a00-0x5ac0 TX[1x64]=0x5ac0-0x5b80 [3.678972] tegra-ivc ivc-b000000.rtcpu:ivccontrol@52c0: ivccontrol: ver=0 g rp=1 RX[16x320]=0x5b80-0x7000 TX[16x320]=0x7000-0x8480 [3.679012] tegra-ivc ivc-b000000.rtcpu:ivccapture@72c0: ivccapture: ver=0 g rp=1 RX[16x64]=0x8480-0x8900 TX[16x64]=0x8900-0x8d80 [3.679096] sdhci-tegra 3440000.sdhci: Parent select= pll\_p rate=408000000 [3.679099] tegra-ivc ivc-b000000.rtcpu:dbg@7c00: dbg: ver=0 grp=1 RX[1x384] =0x8d80-0x8f80 TX[1x384]=0x8f80-0x9180 [3.679139] tegra-ivc ivc-b000000.rtcpu:dbg@7e00: dbg: ver=0 grp=1 RX[1x384] =0x9180-0x9380 TX[1x384]=0x9380-0x9580 [3.679335] tegra186-cam-rtcpu b000000.rtcpu: using cam RTCPU IRQ (52) [3.679337] sdhci-tegra 3440000.sdhci: Client registration for eMC Successfu l [3.679338] tegra186-cam-rtcpu b000000.rtcpu: tegra\_camrtc\_mon\_create is suc cessful [3.680012] tegra186-cam-rtcpu b000000.rtcpu: IOVM setup error: 131 [3.680180] tegra186-cam-rtcpu b000000.rtcpu: ivc-bus boot sync failed: -5 [3.680188] tegra186-cam-rtcpu b000000.rtcpu: firmware version cpu=sce cmd=4 sha1=a8b1ecdd9615cd817a56df035be363fce3b0b88f [3.680417] camchar: rtcpu character device driver loaded [3.681794] arm-smmu 12000000.iommu: Unexpected {global,context} fault, this could be serious [3.681799] arm-smmu 12000000.iommu: GFSR 0x80000002, GFSYNR0 0x0000 0000, GFSYNR1 0x00001816, GFSYNR2 0x00000000 [3.681913] (255) csr\_aonr: EMEM address decode error [3.681932] status = 0x20367097; addr = 0x3ffffffc0 [3.681937] secure: yes, access-type: read [3.681952] unknown mcerr fault, int\_status=0x00000000, ch\_int\_status=0x0000 0000, hubc\_int\_status=0x00000000 [3.681963] unknown mcerr fault, int\_status=0x00000000, ch\_int\_status=0x0000 0000, hubc\_int\_status=0x00000000 [3.681973] unknown mcerr fault, int\_status=0x00000000, ch\_int\_status=0x0000 0000, hubc\_int\_status=0x00000000 [3.681981] mc-err: Too many MC errors; throttling prints [3.682289] tegra186-aondbg aondbg: aondbg driver probe() OK [3.682517] register\_ari\_mca\_banks: Registered MCA ROC:IOB [3.682608] register\_ari\_mca\_banks: Registered MCA ROC:CCE [3.682971] tegra18-bridge 2390000.axi2apb: bridge probed OK [3.682999] tegra18-bridge 23a0000.axi2apb: bridge probed OK [3.683023] tegra18-bridge 23b0000.axi2apb: bridge probed OK [3.683046] tegra18-bridge 23c0000.axi2apb: bridge probed OK [3.683069] tegra18-bridge 23d0000.axi2apb: bridge probed OK [3.683093] tegra18-bridge 2100000.axip2p: bridge probed OK [3.683115] tegra18-bridge 2110000.axip2p: bridge probed OK [3.683137] tegra18-bridge 2120000.axip2p: bridge probed OK [3.683159] tegra18-bridge 2130000.axip2p: bridge probed OK [3.683182] tegra18-bridge 2140000.axip2p: bridge probed OK [3.683203] tegra18-bridge 2150000.axip2p: bridge probed OK [3.683228] tegra18-bridge 2160000.axip2p: bridge probed OK [3.683251] tegra18-bridge 2170000.axip2p: bridge probed OK [3.683275] tegra18-bridge 2180000.axip2p: bridge probed OK [3.683314] tegra18-bridge 2190000.axip2p: bridge probed OK [3.683365] \*\*\*\* A57 ECC: Enabled [3.683367] tegra18\_a57\_serr\_init: on CPU 4 a A57 Core [3.683504] parse\_throttle\_dt\_data: Num cap clks = 4 [3.683506] parse\_throttle\_dt\_data: clk=mcpu type=1 [3.683508] parse\_throttle\_dt\_data: clk=bcpu type=2 [3.683513] parse\_throttle\_dt\_data: clk=gpu type=4 [3.683515] parse\_throttle\_dt\_data: clk=emc type=3 [3.683981] tegra\_throttle\_probe: probe successful. #cdevs=4 [3.684086] tegra18x\_actmon d230000.actmon: in actmon\_register()… [3.686569] tegra18x\_actmon d230000.actmon: initialization Completed for the device mc\_all [3.686883] hw perfevents: enabled with denver15\_uncore\_pmu PMU driver, 3 co unters available [3.688930] tegra-se-nvhost 15810000.se: initialized [3.689373] tegra-se-nvhost 15810000.se: tegra\_se\_probe: complete [3.689701] tegra-se-nvhost 15820000.se: initialized [3.690133] tegra-se-nvhost 15820000.se: tegra\_se\_probe: complete [3.690416] tegra-se-nvhost 15830000.se: initialized [3.690525] tegra-se-nvhost 15830000.se: tegra\_se\_probe: complete [3.690796] tegra-se-nvhost 15840000.se: initialized [3.691247] tegra-se-nvhost 15840000.se: tegra\_se\_probe: complete [3.695006] tegra-gpcdma 2600000.dma: GPC DMA driver register 32 channels [3.696921] arm-smmu 12000000.iommu: Unexpected {global,context} fault, this could be serious [3.696926] arm-smmu 12000000.iommu: GFSR 0x80000002, GFSYNR0 0x0000 0000, GFSYNR1 0x00001432, GFSYNR2 0x00000000 [3.696953] arm-smmu 12000000.iommu: Unexpected {global,context} fault, this could be serious [3.696957] arm-smmu 12000000.iommu: GFSR 0x00000002, GFSYNR0 0x0000 0000, GFSYNR1 0x00001432, GFSYNR2 0x00000000 [3.696989] arm-smmu 12000000.iommu: Unexpected {global,context} fault, this could be serious [3.696991] arm-smmu 12000000.iommu: GFSR 0x00000002, GFSYNR0 0x0000 0000, GFSYNR1 0x00001432, GFSYNR2 0x00000000 [3.697027] arm-smmu 12000000.iommu: Unexpected {global,context} fault, this could be serious [3.697029] arm-smmu 12000000.iommu: GFSR 0x00000002, GFSYNR0 0x0000 0000, GFSYNR1 0x00001432, GFSYNR2 0x00000000 [3.697062] arm-smmu 12000000.iommu: Unexpected {global,context} fault, this could be serious [3.697065] arm-smmu 12000000.iommu: GFSR 0x00000002, GFSYNR0 0x0000 0000, GFSYNR1 0x00001432, GFSYNR2 0x00000000 [3.697109] arm-smmu 12000000.iommu: Unexpected {global,context} fault, this could be serious [3.697112] arm-smmu 12000000.iommu: GFSR 0x80000002, GFSYNR0 0x0000 0002, GFSYNR1 0x00000032, GFSYNR2 0x00000000 [3.697206] arm-smmu 12000000.iommu: Unexpected {global,context} fault, this could be serious [3.697209] arm-smmu 12000000.iommu: GFSR 0x80000002, GFSYNR0 0x0000 0000, GFSYNR1 0x00001832, GFSYNR2 0x00000000 [3.697235] arm-smmu 12000000.iommu: Unexpected {global,context} fault, this could be serious [3.697237] arm-smmu 12000000.iommu: GFSR 0x00000002, GFSYNR0 0x0000 0000, GFSYNR1 0x00001832, GFSYNR2 0x00000000 [3.698806] cpufreq: platform driver Initialization: pass [3.699291] tegra\_cluster\_clk e090000.cluster\_clk\_priv: in probe()… [3.699481] tegra\_cluster\_clk e090000.cluster\_clk\_priv: passed [3.700091] tegra186-padctl 3520000.pinctrl: padctl mmio start 0x00000000035 20000 end 0x0000000003520fff [3.700115] tegra186-padctl 3520000.pinctrl: ao mmio start 0x000000000354000 0 end 0x0000000003540fff [3.700280] tegra186-padctl 3520000.pinctrl: FUSE\_SKU\_USB\_CALIB\_0 0x2ca895 [3.700293] tegra186-padctl 3520000.pinctrl: FUSE\_USB\_CALIB\_EXT\_0 0x8 [3.703793] tegra186-padctl 3520000.pinctrl: using UTMI port 0 for otg [3.706314] tegra186-padctl 3520000.pinctrl: VBUS over-current detection ena bled [3.708072] tegra-bpmp-thermal d000000.bpmp:bpmpthermal: zone 0 not supporte d [3.709217] tegra-bpmp-thermal d000000.bpmp:bpmpthermal: zone 3 not supporte d ---
**Author:** ![wawxh1101](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@wawxh1101](https://forums.developer.nvidia.com/u/wawxh1101)\ **Post date:** [November 1, 2018, 10:31am UTC](https://forums.developer.nvidia.com/t/tx2-hdmi-not-display/66823/8 "2018-11-01T10:31:00Z")
Sorry,I’m not too will use! ---
**Author:** ![WayneWWW](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/waynewww/32/14043_2.png) [@WayneWWW](https://forums.developer.nvidia.com/u/WayneWWW)\ **Post date:** [November 2, 2018, 3:05am UTC](https://forums.developer.nvidia.com/t/tx2-hdmi-not-display/66823/9 "2018-11-02T03:05:08Z")
No error from HDMI in your log, so here are some suggestions for you. There are many changes in kernel and other userspace driver between jetpack3.0 (rel-27.1) and jetpack3.3(rel-28.2.1). It might cause some monitors not working because we chose to support only CEA modes. You could try to use other HDMI monitors and see if it can work. As for the original monitor, please add below to xorg.conf and share Xorg.0.log. #Add below option in /etc/X11/xorg.conf, more log will be shown in /var/log/Xorg.0.log Option “ModeDebug” ---
**Author:** ![wawxh1101](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@wawxh1101](https://forums.developer.nvidia.com/u/wawxh1101)\ **Post date:** [November 2, 2018, 7:54am UTC](https://forums.developer.nvidia.com/t/tx2-hdmi-not-display/66823/10 "2018-11-02T07:54:18Z")
First of all thank you for your answer！ On the development board，3.0 and 3.3 all normal,But,In my own design on the board,JetPack3.0 is normal,JetPack3.3 is not normal. So,I think that has nothing to do with the HDMI display!There are some problems with my hardware must,Can I update uboot or update Image to improve this problem. Thanks! ---
**Author:** ![linuxdev](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/linuxdev/32/10243_2.png) [@linuxdev](https://forums.developer.nvidia.com/u/linuxdev)\ **Post date:** [November 2, 2018, 7:38pm UTC](https://forums.developer.nvidia.com/t/tx2-hdmi-not-display/66823/11 "2018-11-02T19:38:03Z")
You might find this of interest: [https://elinux.org/Jetson\_TX2/r28\_Display\_debug](https://elinux.org/Jetson_TX2/r28_Display_debug) An earlier comment suggests adding this to the “Device” section of the xorg.conf, and then checking Xorg.0.conf log after reboot: ```auto Option "ModeDebug" ``` …this would be very enlightening as it would allow the driver to say what it thinks of each mode your monitor reports compatibility with. ---
**Author:** ![WayneWWW](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/waynewww/32/14043_2.png) [@WayneWWW](https://forums.developer.nvidia.com/u/WayneWWW)\ **Post date:** [November 5, 2018, 3:30am UTC](https://forums.developer.nvidia.com/t/tx2-hdmi-not-display/66823/12 "2018-11-05T03:30:24Z")
If this only happens to your board, please check if your design is following OEM Design guide. Also, just want to make sure… Were the logs in previous comment based on your board? ---
**Author:** ![nadeemm](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/nadeemm/32/367020_2.png) [@nadeemm](https://forums.developer.nvidia.com/u/nadeemm)\ **Post date:** [October 18, 2021, 6:30pm UTC](https://forums.developer.nvidia.com/t/tx2-hdmi-not-display/66823/13 "2021-10-18T18:30:40Z")
Closed on October 18, 2021, 6:30pm UTC