I bought two TX2 Modules. I tried each on the TX1 board and I don’t get any output to the serial console, I do get output to the serial console when I use the TX1 module. Thx, K-

TX2 Module on TX1 board - no boot

kunice July 17, 2017, 6:48pm 4

Turns out the default load of a TX2 module is nothing. switched to fastboot mode and did the jetson install and it booted. Thx.
K-

Topic		Replies	Views
Flow Control on Serial Console Jetson TX2	9	2884	April 20, 2017
First boot on the TX2 black screen Jetson TX2	8	4827	October 18, 2021
How to install SPI and UART on Jetson TX2 Jetson TX2	3	1984	October 18, 2021
Auto RTS functionality in Jetson TX2 Module Jetson TX2	3	643	December 3, 2018
TX2-I boot problem Jetson TX2	10	912	October 18, 2021
Tx2i not booting in normal or force recovery mode Jetson TX2	9	1185	October 18, 2021
UART0 on ttyS0 sends but isn't receiving any data Jetson TX2	9	1196	October 18, 2021
TX2 NX uartb HW flow control not work Jetson TX2 kernel , uart	12	1096	June 8, 2022
Debug uart no print message when TX2 power up Jetson TX2	1	333	January 18, 2019
/dev/ttyTHS2 missing Jetson TX2	9	3382	October 18, 2021