Hi,
on TX2 NX JP4.5.1,I’m using ov5693 delete i2c part to grab a pre-configured mipi csi video signal.
kernel shows no probe error,
[ 1.302620] i2c /dev entries driver
[ 1.303821] suchb----->ov5693 probe mipi csi ab.
[ 1.303827] mipicsi-ab 2-0036: probing v4l2 sensor no i2c.
[ 1.304284] mipicsi-ab 2-0036: tegracam sensor driver:ov5693_v2.0.6
[ 1.304400] suchb----->ov5693 probe mipi csi cd.
[ 1.304404] mipicsi-cd 0-0036: probing v4l2 sensor no i2c.
[ 1.304627] mipicsi-cd 0-0036: tegracam sensor driver:ov5693_v2.0.6
[ 1.304743] usbcore: registered new interface driver uvcvideo
[ 1.304745] USB Video Class driver (1.1.1)
nvidia@nvidia:~$ dmesg |grep cam
[ 0.514707] camchar: rtcpu character device driver loaded
[ 0.832192] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe
[ 0.832301] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1000000, vi_iso_bw=1875000, max_bw=1875000
[ 1.304284] mipicsi-ab 2-0036: tegracam sensor driver:ov5693_v2.0.6
[ 1.304627] mipicsi-cd 0-0036: tegracam sensor driver:ov5693_v2.0.6
[ 1.334569] tegra186-cam-rtcpu b000000.rtcpu: Trace buffer configured at IOVA=0xbff00000
[ 1.337861] tegra186-cam-rtcpu b000000.rtcpu: using cam RTCPU IRQ (45)
[ 1.337864] tegra186-cam-rtcpu b000000.rtcpu: tegra_camrtc_mon_create is successful
[ 1.338408] tegra186-cam-rtcpu b000000.rtcpu: firmware version cpu=sce cmd=5 sha1=3ecb1dca25fa98771f988f238c025334776c9a96
but no video devices under /dev/
how to fix this issue?
thanks.