Tx2-nx pinmux general .cfg error

Autonomous Machines Jetson & Embedded Systems Jetson TX2
9

Hi earl0054,

We can’t reproduce your issue on TX2-NX with r32.5.2.
List our steps for you reference:

  1. Download Pinmux v1.01 from Download Center.
  2. Generate *.dtsi from excel file.
  3. Copy *.dtsi to /Linux_for_Tegra/kernel/pinmux/t186/
  4. Run below command to generate cfg file:
    $ python pinmux-dts2cfg.py --pinmux addr_info.txt gpio_addr_info.txt por_val.txt tegra186-quill-p3310-1000-a00-pinmux.dtsi tegra186-quill-p3310-1000-a00-gpio-default.dtsi 1.0 > tegra186-mb1-bct-pinmux-p3636-0001-a00.cfg
  5. Replace tegra186-mb1-bct-pinmux-p3636-0001-a00.cfg to /Linux_for_Tegra/bootloader/t186ref/BCT/
  6. Flash image:
    $ sudo ./flash.sh jetson-xavier-nx-devkit-tx2-nx mmcblk0p1

We are using default pinmux setting to generate dtsi.
Are you change any value from pinmux?