# TX2 SD card slot **URL:** \ **Category:** Jetson TX2\ **Created:** [July 6, 2017, 6:53am UTC](https://forums.developer.nvidia.com/t/tx2-sd-card-slot/51397 "2017-07-06T06:53:46Z")\ **Posts on this page:** 18\ **Page:** 1
**Author:** ![ArvidsP](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@ArvidsP](https://forums.developer.nvidia.com/u/ArvidsP)\ **Post date:** [July 6, 2017, 6:53am UTC](https://forums.developer.nvidia.com/t/tx2-sd-card-slot/51397/1 "2017-07-06T06:53:46Z")
I can’t find information about Jetson TX2 sd card slot. Does it support UHS - III SD cards? Thanks! ---
**Author:** ![Trumany](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/trumany/32/14043_2.png) [@Trumany](https://forums.developer.nvidia.com/u/Trumany)\ **Post date:** [July 6, 2017, 8:26am UTC](https://forums.developer.nvidia.com/t/tx2-sd-card-slot/51397/2 "2017-07-06T08:26:54Z")
No, it doesn’t. It’s UHS-I only same as TX1. ---
**Author:** ![ArvidsP](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@ArvidsP](https://forums.developer.nvidia.com/u/ArvidsP)\ **Post date:** [July 6, 2017, 9:43am UTC](https://forums.developer.nvidia.com/t/tx2-sd-card-slot/51397/3 "2017-07-06T09:43:55Z")
> [@Trumany](#): > > No, it doesn’t. It’s UHS-I only same as TX1. Could you, please, recoment which SD card i should get. UHS-I are rarely available. ---
**Author:** ![Trumany](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/trumany/32/14043_2.png) [@Trumany](https://forums.developer.nvidia.com/u/Trumany)\ **Post date:** [July 7, 2017, 3:44am UTC](https://forums.developer.nvidia.com/t/tx2-sd-card-slot/51397/4 "2017-07-07T03:44:14Z")
UHS-I card is common type, there are lots of on Amazon ---
**Author:** ![linuxdev](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/linuxdev/32/10243_2.png) [@linuxdev](https://forums.developer.nvidia.com/u/linuxdev)\ **Post date:** [July 7, 2017, 11:22am UTC](https://forums.developer.nvidia.com/t/tx2-sd-card-slot/51397/5 "2017-07-07T11:22:55Z")
Here are some UHS-1 cards: [url][uhs-1 | Newegg.com](https://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=100007962&IsNodeId=1&Description=uhs-1&name=Memory%20Cards&Order=PRICE&Pagesize=36&isdeptsrh=1%5B/url%5D) ---
**Author:** ![Andrey1984](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/andrey1984/32/14130_2.png) [@Andrey1984](https://forums.developer.nvidia.com/u/Andrey1984)\ **Post date:** [July 7, 2017, 2:26pm UTC](https://forums.developer.nvidia.com/t/tx2-sd-card-slot/51397/6 "2017-07-07T14:26:46Z")
It seems that [Amazon.com](https://www.amazon.com/Sony-microSDHC-Memory-SR32UY2A-TQ/dp/B00X1404DA) should work. Shouldn’t it? ---
**Author:** ![Andrey1984](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/andrey1984/32/14130_2.png) [@Andrey1984](https://forums.developer.nvidia.com/u/Andrey1984)\ **Post date:** [July 7, 2017, 2:27pm UTC](https://forums.developer.nvidia.com/t/tx2-sd-card-slot/51397/7 "2017-07-07T14:27:47Z")
[https://www.amazon.com/gp/product/B01M0PX2ZW/ref=s9\_acsd\_top\_hd\_bw\_b3I4RsJ\_c\_x\_w?pf\_rd\_m=ATVPDKIKX0DER&pf\_rd\_s=merchandised-search-4&pf\_rd\_r=Z33M2TAHG5MPT76FG2S9&pf\_rd\_t=101&pf\_rd\_p=4deb6fed-1027-542e-9972-8f77337666ef&pf\_rd\_i=3015433011](https://www.amazon.com/gp/product/B01M0PX2ZW/ref=s9_acsd_top_hd_bw_b3I4RsJ_c_x_w?pf_rd_m=ATVPDKIKX0DER&pf_rd_s=merchandised-search-4&pf_rd_r=Z33M2TAHG5MPT76FG2S9&pf_rd_t=101&pf_rd_p=4deb6fed-1027-542e-9972-8f77337666ef&pf_rd_i=3015433011) shall work perhaps as well. ---
**Author:** ![Trumany](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/trumany/32/14043_2.png) [@Trumany](https://forums.developer.nvidia.com/u/Trumany)\ **Post date:** [July 10, 2017, 4:15am UTC](https://forums.developer.nvidia.com/t/tx2-sd-card-slot/51397/8 "2017-07-10T04:15:04Z")
Cards marked with UHS-1 should be available. Please note that it is SD socket on board, not micro SD socket. It needs adapter if with micro SD card. ---
**Author:** ![ArvidsP](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@ArvidsP](https://forums.developer.nvidia.com/u/ArvidsP)\ **Post date:** [July 14, 2017, 6:02am UTC](https://forums.developer.nvidia.com/t/tx2-sd-card-slot/51397/9 "2017-07-14T06:02:18Z")
> [@](#): > > Here are some UHS-1 cards: > [https://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=100007962&IsNodeId=1&Description=uhs-1&name=Memory%20Cards&Order=PRICE&Pagesize=36&isdeptsrh=1](https://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=100007962&IsNodeId=1&Description=uhs-1&name=Memory%20Cards&Order=PRICE&Pagesize=36&isdeptsrh=1) > [@](#): > > It seems that [Amazon.com](https://www.amazon.com/Sony-microSDHC-Memory-SR32UY2A-TQ/dp/B00X1404DA) should work. Shouldn’t it? Thank you very much! ---
**Author:** ![zobertke](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@zobertke](https://forums.developer.nvidia.com/u/zobertke)\ **Post date:** [February 8, 2018, 8:53am UTC](https://forums.developer.nvidia.com/t/tx2-sd-card-slot/51397/10 "2018-02-08T08:53:36Z")
Hi, I have an issue also with my Jetson TX2 recognizing SD cards. Actually it doesn’t recognize any UHS-I SD card. Tried with JetPack 3.1RC and JetPack 3.2DP too. It is really frustrating. Dunno if it needs RMA. I have also some logs from dmesg I am attaching. As you can see: [4.102830] mmc1: queuing unknown CIS tuple 0x91 (3 bytes) [4.102873] mmc1: new ultra high speed SDR104 SDIO card at address 0001 it finds the card, but then I get this all the time: [9.295257] mmc1: queuing unknown CIS tuple 0x80 (5 bytes) Any help, would be highly appreciated, as I don’t really want to send it back for RMA if it is possible. Thanks The full log: [code][0.000000] Booting Linux on physical CPU 0x100 [0.000000] Initializing cgroup subsys cpuset [0.000000] Initializing cgroup subsys cpu [0.000000] Initializing cgroup subsys cpuacct [0.000000] Linux version 4.4.38-tegra (buildbrain@mobile-u64-753) (gcc version 4.8.5 (GCC) ) #1 SMP PREEMPT Fri Dec 1 06:08:28 PST 2017 [0.000000] Boot CPU: AArch64 Processor [411fd073] [0.000000] earlycon: Early serial console at MMIO32 0x3100000 (options ‘’) [0.000000] bootconsole [uart0] enabled [0.000000] Found tegra\_fbmem2: 00800000@969e9000 [0.000000] Found lut\_mem2: 00002008@969e6000 [0.000000] Reserved memory: initialized node ramoops\_carveout, compatible id nvidia,ramoops [0.000000] cma: Reserved 64 MiB at 0x00000000fc000000 [0.000000] On node 0 totalpages: 2051584 [0.000000] DMA zone: 8192 pages used for memmap [0.000000] DMA zone: 0 pages reserved [0.000000] DMA zone: 519920 pages, LIFO batch:31 [0.000000] Normal zone: 23933 pages used for memmap [0.000000] Normal zone: 1531664 pages, LIFO batch:31 [0.000000] psci: probing for conduit method from DT. [0.000000] psci: PSCIv1.0 detected in firmware. [0.000000] psci: Using standard PSCI v0.2 function IDs [0.000000] psci: MIGRATE\_INFO\_TYPE not supported. [0.000000] PERCPU: Embedded 17 pages/cpu @ffffffc1f5cf2000 s31360 r8192 d30080 u69632 [0.000000] pcpu-alloc: s31360 r8192 d30080 u69632 alloc=17_4096 [0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2019459 [0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 OS=l4t fbcon=map:0 net.ifnames=0 memtype=0 video=tegrafb no\_console\_suspend=1 earlycon=uart8250,mmio32,0x03100000 nvdumper\_reserved=0x2772e0000 gpt tegra\_fbmem2=0x800000@0x969e9000 lut\_mem2=0x2008@0x969e6000 tegraid=18.1.2.0.0 tegra\_keep\_boot\_clocks maxcpus=6 boot.slot\_suffix= boot.ratchetvalues=0.2.1 androidboot.serialno=0323917022910 bl\_prof\_dataptr=0x10000@0x277040000 sdhci\_tegra.en\_boot\_part\_access=1 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 [0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [0.000000] Memory: 7965748K/8206336K available (11272K kernel code, 1849K rwdata, 5780K rodata, 1168K init, 690K bss, 175052K reserved, 65536K cma-reserved) [0.000000] Virtual kernel memory layout: vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000 ( 246 GB) vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum) 0xffffffbdc2000000 - 0xffffffbdc9d7c400 ( 125 MB actual) fixed : 0xffffffbffa7fd000 - 0xffffffbffac00000 ( 4108 KB) PCI I/O : 0xffffffbffae00000 - 0xffffffbffbe00000 ( 16 MB) modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB) memory : 0xffffffc000000000 - 0xffffffc1f5f10000 ( 8031 MB) .init : 0xffffffc001128000 - 0xffffffc00124c000 ( 1168 KB) .text : 0xffffffc000080000 - 0xffffffc001128000 ( 17056 KB) .data : 0xffffffc00126d000 - 0xffffffc00143b510 ( 1850 KB) [0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [0.000000] Preemptible hierarchical RCU implementation. [0.000000] Build-time adjustment of leaf fanout to 64. [0.000000] RCU restricting CPUs from NR\_CPUS=64 to nr\_cpu\_ids=6. [0.000000] RCU: Adjusting geometry for rcu\_fanout\_leaf=64, nr\_cpu\_ids=6 [0.000000] NR\_IRQS:64 nr\_irqs:64 0 [0.000000] GIC: Using split EOI/Deactivate mode [0.000000] Architected cp15 timer(s) running at 31.25MHz (phys). [0.000000] clocksource: arch\_sys\_counter: mask: 0xffffffffffffff max\_cycles: 0xe6a171046, max\_idle\_ns: 881590405314 ns [0.000002] sched\_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [0.009857] Console: colour dummy device 80x25 [0.014514] console [tty0] enabled [0.018070] bootconsole [uart0] disabled [0.022172] kmemleak: Kernel memory leak detector disabled [0.022182] Calibrating delay loop (skipped), value calculated using timer frequency… 62.50 BogoMIPS (lpj=125000) [0.022194] pid\_max: default: 32768 minimum: 301 [0.022241] Security Framework initialized [0.022278] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [0.022286] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [0.022666] Initializing cgroup subsys io [0.022678] Initializing cgroup subsys memory [0.022694] Initializing cgroup subsys devices [0.022703] Initializing cgroup subsys freezer [0.022710] Initializing cgroup subsys net\_cls [0.022719] Initializing cgroup subsys perf\_event [0.022727] Initializing cgroup subsys net\_prio [0.022736] Initializing cgroup subsys pids [0.022743] Initializing cgroup subsys debug [0.022882] CPU0 ipc=752 [0.022891] CPU1 ipc=1024 [0.022898] CPU2 ipc=1024 [0.022906] CPU3 ipc=752 [0.022914] CPU4 ipc=752 [0.022923] CPU5 ipc=752 [0.022962] ASID allocator initialised with 65536 entries [0.046281] tegra-id: chipid=21817. [0.046298] tegra-id: opt\_subrevision=1. [0.046310] Tegra Revision: A02p SKU: 0xdc CPU Process: 0 SoC Process: 0 [0.046963] DTS File Name: /dvs/git/dirty/git-master\_linux/kernel/kernel-4.4/arch/arm64/boot/dts/…/…/…/…/…/…/hardware/nvidia/platform/t18x/quill/kernel-dts/tegra186-quill-p3310-1000-c03-00-base.dts [0.046988] DTB Build time: Dec 1 2017 06:10:28 [0.062577] CPU1: Booted secondary processor [4e0f0030] [0.074124] CPU2: Booted secondary processor [4e0f0030] [0.085819] CPU3: Booted secondary processor [411fd073] [0.097818] CPU4: Booted secondary processor [411fd073] [0.109813] CPU5: Booted secondary processor [411fd073] [0.109873] Brought up 6 CPUs [0.109922] SMP: Total of 6 processors activated. [0.109933] CPU: All CPU(s) started at EL2 [0.110382] devtmpfs: initialized [0.137485] Initilizing CustomIPI irq domain [0.137695] clocksource: jiffies: mask: 0xffffffff max\_cycles: 0xffffffff, max\_idle\_ns: 7645041785100000 ns [0.138531] pinctrl core: initialized pinctrl subsystem [0.138711] OS set in device tree is L4T. [0.138905] regulator-dummy: no parameters [0.139013] Initializing plugin-manager [0.139066] Plugin module not found [0.139478] node /plugin-manager/soc-prod-a02-fragment match with chip-id A02P [0.139816] node /plugin-manager/fragement@0 match with odm-data enable-denver-wdt [0.140428] node /plugin-manager/fragement@4 match with odm-data enable-denver-wdt [0.141623] node /plugin-manager/fragment-sdwake-p3310-1000-300 match with board \>=3310-1000-300 [0.141979] node /plugin-manager/fragement-pmon-p3310-1000-300 match with board \>=3310-1000-300 [0.142231] node /plugin-manager/fragement-pmon-p3310-1000-800 match with board \>=3310-1000-800 [0.142449] node /plugin-manager/fragment-devslp@0 match with board \>=3310-1000-200 [0.142872] node /plugin-manager/fragment-500-pcie-config match with board \>=3310-1000-500 [0.143313] node /plugin-manager/fragment-500-xusb-config match with board \>=3310-1000-500 [0.143589] node /plugin-manager/fragment-500-e3325-pcie match with board \>=3310-1000-500 [0.143970] node /plugin-manager/fragment-p3310-c00-comm match with board \>=3310-1000-800 [0.144216] node /plugin-manager/fragment-p3310-c00-pmic match with board \>=3310-1000-800 [0.144435] node /plugin-manager/fragment-p3310-c01 match with board \>=3310-1000-900 [0.144695] node /plugin-manager/fragment-p3310-c03 match with board \>=3310-1000-B00 [0.146263] node /plugin-manager/fragment-e3326@0 match with board 3326-_ [0.147356] node /plugin-manager/fragment-p3310-c00-camera match with board \>=3310-1000-800 [0.149157] Adding domain adsp-pd to PM domain ape-pd [0.151519] NET: Registered protocol family 16 [0.153681] console [pstore-1] enabled [0.153692] pstore: Registered ramoops as persistent store backend [0.153704] ramoops: attached 0x200000@0x277080000, ecc: 0/0 [0.165360] cpuidle: using governor ladder [0.169820] cpuidle: using governor menu [0.170989] bpmp: waiting for handshake [0.171001] bpmp: handshake completed [0.171041] bpmp: synchronizing channels [0.171071] bpmp: channels synchronized [0.171081] bpmp: mail init ok [0.171438] vdso: 2 pages (1 code @ ffffffc001275000, 1 data @ ffffffc001274000) [0.171470] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [0.172400] atomic\_pool\_init():526: DMA: preallocated 1024 KiB pool for atomic allocations [0.173836] tegra\_powergate\_init: DONE [0.173857] DTS File Name: /dvs/git/dirty/git-master\_linux/kernel/kernel-4.4/arch/arm64/boot/dts/…/…/…/…/…/…/hardware/nvidia/platform/t18x/quill/kernel-dts/tegra186-quill-p3310-1000-c03-00-base.dts [0.173882] DTB Build time: Dec 1 2017 06:10:28 [0.174806] Tegra reboot handler registered. [0.175886] Registering Tegra186 clocks (this may take a while)…done [0.178032] arm-smmu 12000000.iommu: probing hardware configuration… [0.178048] arm-smmu 12000000.iommu: SMMUv2 with: [0.178061] arm-smmu 12000000.iommu: stage 1 translation [0.178072] arm-smmu 12000000.iommu: stage 2 translation [0.178083] arm-smmu 12000000.iommu: nested translation [0.178097] arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80 [0.178114] arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)! [0.178132] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [0.178145] arm-smmu 12000000.iommu: Stage-1: 39-bit VA → 48-bit IPA [0.178156] arm-smmu 12000000.iommu: Stage-2: 39-bit IPA → 48-bit PA [0.227178] arm-smmu 12000000.iommu: registered 67 master devices [0.233070] iommu: Adding device 3460000.sdhci to group 0 [0.233899] iommu: Adding device 3400000.sdhci to group 1 [0.237424] iommu: Adding device 3507000.ahci-sata to group 2 [0.237875] iommu: Adding device 3160000.i2c to group 3 [0.238271] iommu: Adding device c240000.i2c to group 4 [0.238616] iommu: Adding device 3180000.i2c to group 5 [0.239007] iommu: Adding device 3190000.i2c to group 6 [0.239445] iommu: Adding device 31b0000.i2c to group 7 [0.239760] iommu: Adding device 31c0000.i2c to group 8 [0.240085] iommu: Adding device c250000.i2c to group 9 [0.240427] iommu: Adding device 31e0000.i2c to group 10 [0.242466] iommu: Adding device 3210000.spi to group 11 [0.242798] iommu: Adding device c260000.spi to group 12 [0.243170] iommu: Adding device 3240000.spi to group 13 [0.243970] iommu: Adding device 3100000.serial to group 14 [0.244293] iommu: Adding device 3110000.serial to group 15 [0.244584] iommu: Adding device c280000.serial to group 16 [0.244903] iommu: Adding device 3130000.serial to group 17 [0.246146] iommu: Adding device 2490000.ether\_qos to group 18 [0.246766] iommu: Adding device b000000.rtcpu to group 19 [0.247277] iommu: Adding device c1a0000.aon to group 20 [0.248107] Wake73 for irq=42 [0.248433] iommu: Adding device smmu\_test to group 21 [0.248941] mc: mapped MMIO address: 0xffffff8000560000 → 0x2c10000 [0.248978] mc: mapped MMIO address: 0xffffff8000640000 → 0x2c20000 [0.249015] mc: mapped MMIO address: 0xffffff8000660000 → 0x2c30000 [0.249048] mc: mapped MMIO address: 0xffffff8000fa0000 → 0x2c40000 [0.249080] mc: mapped MMIO address: 0xffffff8000fc0000 → 0x2c50000 [0.249112] mc-err: Set intmask: 0xf3140 [0.249398] dram-ecc: DRAM ECC disabled-MC\_ECC\_CONTROL:0x0000000c [0.250238] Wake76 for irq=199 [0.250259] Wake77 for irq=199 [0.250277] Wake78 for irq=199 [0.250294] Wake79 for irq=199 [0.250311] Wake80 for irq=199 [0.250328] Wake81 for irq=199 [0.250369] Wake82 for irq=199 [0.250479] iommu: Adding device 3530000.xhci to group 22 [0.250860] iommu: Adding device 3550000.xudc to group 23 [0.251646] tegra-pmc c360000.pmc: scratch reg offset dts data not present [0.251678] tegra-pmc: ### PMC reset source: Software reset [0.251698] tegra-pmc: ### PMC reset level: L1 [0.251717] tegra-pmc: ### PMC reset status reg: 0x2d [0.251991] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [0.252030] tegra-pmc c360000.pmc: IO padctrl driver initialized [0.252199] tegra186-aowake c370000.pmc: WAKE\_AOWAKE\_CTRL\_0 = 3 [0.252226] tegra186-aowake c370000.pmc: WAKE\_AOWAKE\_CNTRL\_24(PMU\_INT) = 320 [0.252705] iommu: Adding device 13e10000.host1x to group 24 [0.252958] iommu: Adding device 13e10000.host1x:ctx0 to group 25 [0.253216] iommu: Adding device 13e10000.host1x:ctx1 to group 26 [0.253439] iommu: Adding device 13e10000.host1x:ctx2 to group 27 [0.253703] iommu: Adding device 13e10000.host1x:ctx3 to group 28 [0.253917] iommu: Adding device 13e10000.host1x:ctx4 to group 29 [0.254204] iommu: Adding device 13e10000.host1x:ctx5 to group 30 [0.254432] iommu: Adding device 13e10000.host1x:ctx6 to group 31 [0.254692] iommu: Adding device 13e10000.host1x:ctx7 to group 32 [0.255132] iommu: Adding device 150c0000.nvcsi to group 33 [0.255637] iommu: Adding device 15700000.vi to group 34 [0.255961] iommu: Adding device 15600000.isp to group 35 [0.256343] iommu: Adding device 15210000.nvdisplay to group 36 [0.256512] platform 15210000.nvdisplay: IOVA linear map 0x00000000969e9000(800000) [0.256550] platform 15210000.nvdisplay: IOVA linear map 0x00000000969e6000(3000) [0.256734] iommu: Adding device 15340000.vic to group 37 [0.256959] iommu: Adding device 154c0000.nvenc to group 38 [0.257153] iommu: Adding device 15480000.nvdec to group 39 [0.257501] iommu: Adding device 15380000.nvjpg to group 40 [0.257697] iommu: Adding device 15500000.tsec to group 41 [0.257916] iommu: Adding device 15100000.tsecb to group 42 [0.258671] iommu: Adding device 15810000.se to group 43 [0.258877] iommu: Adding device 15820000.se to group 44 [0.259093] iommu: Adding device 15830000.se to group 45 [0.259269] iommu: Adding device 15840000.se to group 46 [0.259804] iommu: Adding device 17000000.gp10b to group 47 [0.261167] tegra-reset 5000000.clock: registered 193 resets. [0.263224] iommu: Adding device d000000.bpmp to group 48 [0.263493] bpmp: ping status is 0 [0.263671] bpmp d000000.bpmp: firmware tag is 63057f9a9f82d7b13a2680dbce98d104 [0.264034] bpmp d000000.bpmp: probe ok [0.266668] iommu: Adding device 2600000.dma to group 49 [0.267746] GPIO line 461 (cam0-rst) hogged as output/low [0.267806] GPIO line 456 (cam0-pwdn) hogged as output/low [0.267882] GPIO line 457 (cam1-rst) hogged as output/low [0.267932] GPIO line 426 (cam1-pwdn) hogged as output/low [0.267986] GPIO line 424 (wifi-enable) hogged as output/high [0.268040] GPIO line 445 (sdmmc-wake-input) hogged as input [0.268110] GPIO line 446 (sdmmc-wake-output) hogged as output/low [0.268218] gpiochip\_add\_data: registered GPIOs 320 to 511 on device: tegra-gpio [0.270165] GPIO line 315 (wifi-wake-ap) hogged as input [0.270293] gpiochip\_add\_data: registered GPIOs 256 to 319 on device: tegra-gpio-aon [0.271381] iommu: Adding device 10003000.pcie-controller to group 50 [0.271628] iommu: Adding device sound to group 51 [0.273262] iommu: Adding device 3510000.hda to group 52 [0.274809] iommu: Adding device adsp\_audio to group 53 [0.276218] iommu: Adding device 2993000.adsp to group 54 [0.285326] vdd-ac-bat: 5000 mV [0.287522] vdd-1v8-ap: 1800 mV [0.304764] SCSI subsystem initialized [0.304927] libata version 3.00 loaded. [0.305087] usbcore: registered new interface driver usbfs [0.305138] usbcore: registered new interface driver hub [0.305257] usbcore: registered new device driver usb [0.308986] GPIO line 241 (touch-rail-1) hogged as output/high [0.309439] GPIO line 242 (touch-rail-2) hogged as output/high [0.309533] gpiochip\_add\_data: registered GPIOs 240 to 255 on device: tca9539 [0.310857] GPIO line 228 (lcd-bias-en-rail) hogged as output/high [0.310946] gpiochip\_add\_data: registered GPIOs 224 to 239 on device: tca9539 [0.321400] media: Linux media interface: v0.10 [0.321460] Linux video capture interface: v2.00 [0.324434] pps\_core: LinuxPPS API ver. 1 registered [0.324457] pps\_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [giometti@linux.it](mailto:giometti@linux.it) [0.324499] PTP clock support registered [0.325390] tegra\_wdt\_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [0.325433] tegra\_wdt\_t18x 30c0000.watchdog: Registered successfully [0.326873] max77620 4-003c: PMIC Version OTP:0x45 and ES:0x8 [0.328822] GPIO line 221 (spmic\_gpio\_input\_5) hogged as input [0.329005] GPIO line 222 (spmic\_gpio\_input\_6) hogged as input [0.329098] gpiochip\_add\_data: registered GPIOs 216 to 223 on device: max77620-gpio [0.334748] vddio-ddr: at 1125 mV [0.338587] avdd\_dsi\_csi: 1200 mV [0.342586] vdd-1v8: 1800 mV [0.346586] vdd-3v3-sys: 3300 mV [0.347339] spmic-ldo0: at 1800 mV [0.348122] spmic-ldo1: at 800 mV [0.350589] vddio-3v3: 3300 mV [0.351219] vddio-sdmmc1: 1800 \<–\> 3300 mV at 3300 mV [0.354589] vdd-rtc: at 800 mV [0.355230] avdd-ts-hv: 1800 \<–\> 3300 mV at 1800 mV [0.358589] spmic-ldo6: at 1500 mV [0.361357] vdd-pex-1v05: 1000 mV [0.361920] dvdd-pex: 1000 mV [0.362194] max77620 4-003c: max77620 probe successful [0.362443] Advanced Linux Sound Architecture Driver Initialized. [0.363428] en-vdd-sd: 3300 mV [0.364034] en-vdd-cam: 1800 mV [0.365822] vdd-hdmi: 5000 mV [0.365998] vdd-usb0-5v: 5000 mV [0.366166] vdd-usb1-5v: 5000 mV [0.369823] en-vdd-ts-1v8: 1800 mV [0.373822] en-vdd-ts-hv-3v3: 3300 mV [0.374359] en-vdd-disp-3v3: 3300 mV [0.374869] en-mdm-pwr-3v7: 3700 mV [0.375377] en-vdd-disp-1v8: 1800 mV [0.375896] en-vdd-cam-hv-2v8: 2800 mV [0.376418] en-vdd-cam-1v2: 1200 mV [0.376938] vdd-fan: 5000 mV [0.377056] vdd-3v3: 3300 mV [0.377785] dis-vdd-1v2: 1200 mV [0.377905] en-vdd-vcm-2v8: 2800 mV [0.378423] vdd-usb2-5v: 5000 mV [0.378528] vdd-sys-bl: 3300 mV [0.379063] en-vdd-sys: 1200 mV [0.382427] extcon-gpio-states external-connection:extcon@1: Cable state 2 [0.382847] clocksource: Switched to clocksource arch\_sys\_counter [0.401471] nvmap\_heap\_init: nvmap\_heap\_init: created heap block cache [0.401742] nvmap: nvmap\_override\_cache\_ops() set roc flush ops to replace cache ops by set/ways [0.402216] nvmap\_page\_pool\_init: Total RAM pages: 2007821 [0.402231] nvmap\_page\_pool\_init: nvmap page pool size: 250977 pages (980 MB) [0.402370] nvmap\_background\_zero\_thread: PP zeroing thread starting. [0.406806] Wake76 for irq=199 [0.406817] Wake77 for irq=199 [0.406827] Wake78 for irq=199 [0.406837] Wake79 for irq=199 [0.406845] Wake80 for irq=199 [0.406854] Wake81 for irq=199 [0.406862] Wake82 for irq=199 [0.407601] thermal thermal\_zone0: Registering thermal zone thermal\_zone0 for type BCPU-therm [0.407800] thermal thermal\_zone1: Registering thermal zone thermal\_zone1 for type MCPU-therm [0.407916] thermal thermal\_zone2: Registering thermal zone thermal\_zone2 for type GPU-therm [0.407990] thermal thermal\_zone3: Registering thermal zone thermal\_zone3 for type PLL-therm [0.408380] thermal thermal\_zone4: Registering thermal zone thermal\_zone4 for type AO-therm [0.408520] thermal thermal\_zone5: Registering thermal zone thermal\_zone5 for type Tboard\_tegra [0.408662] thermal thermal\_zone6: Registering thermal zone thermal\_zone6 for type Tdiode\_tegra [0.408809] thermal thermal\_zone7: Registering thermal zone thermal\_zone7 for type PMIC-Die [0.409102] isomgr\_init(): iso emc max clk=1866000KHz [0.409113] isomgr\_init(): max\_iso\_bw=26870400KB [0.409197] NET: Registered protocol family 2 [0.409503] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [0.409725] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [0.410017] TCP: Hash tables configured (established 65536 bind 65536) [0.410077] UDP hash table entries: 4096 (order: 5, 131072 bytes) [0.410129] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [0.410288] NET: Registered protocol family 1 [0.410488] RPC: Registered named UNIX socket transport module. [0.410524] RPC: Registered udp transport module. [0.410535] RPC: Registered tcp transport module. [0.410545] RPC: Registered tcp NFSv4.1 backchannel transport module. [0.410564] PCI: CLS 0 bytes, default 128 [0.410667] Trying to unpack rootfs image as initramfs… [0.424425] host1x 13e10000.host1x: initialized [0.425294] hw perfevents: enabled with armv8\_pmuv3 PMU driver, 7 counters available [0.426942] futex hash table entries: 2048 (order: 6, 262144 bytes) [0.427041] audit: initializing netlink subsys (disabled) [0.427082] audit: type=2000 audit(0.416:1): initialized [0.434068] io scheduler noop registered [0.434168] io scheduler cfq registered (default) [0.436676] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [0.437813] tegra-pwm 3290000.pwm: PWM clk can sleep in ops [0.438846] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [0.439857] tegra-pwm c340000.pwm: PWM clk can sleep in ops [0.443242] tsec 15500000.tsec: initialized [0.444347] tsec 15100000.tsecb: initialized [0.446658] nvdec 15480000.nvdec: initialized [0.450278] falcon 15340000.vic: initialized [0.451258] falcon 154c0000.nvenc: initialized [0.452273] falcon 15380000.nvjpg: initialized [0.453055] iommu\_context\_dev 13e10000.host1x:ctx0: initialized (streamid=56) [0.453561] iommu\_context\_dev 13e10000.host1x:ctx1: initialized (streamid=57) [0.454066] iommu\_context\_dev 13e10000.host1x:ctx2: initialized (streamid=58) [0.454571] iommu\_context\_dev 13e10000.host1x:ctx3: initialized (streamid=59) [0.455088] iommu\_context\_dev 13e10000.host1x:ctx4: initialized (streamid=60) [0.455592] iommu\_context\_dev 13e10000.host1x:ctx5: initialized (streamid=61) [0.456092] iommu\_context\_dev 13e10000.host1x:ctx6: initialized (streamid=62) [0.456594] iommu\_context\_dev 13e10000.host1x:ctx7: initialized (streamid=63) [0.459209] DC OR NODE connected to /host1x/sor1 [0.459332] generic\_infoframe\_type: 0x87 [0.459341] tegra\_camera\_platform tegra-camera-platform: tegra\_camera\_probe:camera\_platform\_driver probe [0.459435] misc tegra\_camera\_ctrl: tegra\_camera\_isomgr\_register tpg\_max\_iso = 3916800KBs [0.459454] misc tegra\_camera\_ctrl: tegra\_camera\_isomgr\_register isp\_iso\_bw=4687500, vi\_iso\_bw=1500000, max\_bw=4687500 [0.459458] tegradc 15210000.nvdisplay: DT parsed successfully [0.459488] tegradc 15210000.nvdisplay: Display dc.ffffff8002320000 registered with id=0 [0.466688] tegra\_nvdisp\_bandwidth\_register\_max\_config: max config iso bw = 16727000 KB/s [0.466707] tegra\_nvdisp\_bandwidth\_register\_max\_config: max config EMC floor = 665600000 Hz [0.466722] tegra\_nvdisp\_bandwidth\_register\_max\_config: max config hubclk = 357620000 Hz [0.466768] tegradc 15210000.nvdisplay: vblank syncpt # 7 for dc 1 [0.466783] tegradc 15210000.nvdisplay: vpulse3 syncpt # 8 for dc 1 [0.466923] tegra-adma 2930000.adma: Tegra ADMA driver register 10 channels [0.467716] tegradc 15210000.nvdisplay: Bootloader disp\_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [0.469473] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized [0.469817] kfuse 3830000.kfuse: initialized [0.469904] tegradc 15210000.nvdisplay: hdmi: no prod\_list\_hdmi\_board, use default range [0.471251] tegradc 15210000.nvdisplay: probed [0.471674] tegra-pmc-iopower pmc-iopower: NO\_IOPOWER setting 0x0 [0.472156] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [0.474097] console [ttyS0] disabled [0.474146] 3100000.serial: ttyS0 at MMIO 0x3100000 (irq = 37, base\_baud = 25500000) is a Tegra [2.609036] console [ttyS0] enabled [2.611018] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 38, base\_baud = 0) is a TEGRA\_UART [2.612070] c280000.serial: ttyTHS2 at MMIO 0xc280000 (irq = 39, base\_baud = 0) is a TEGRA\_UART [2.612290] serial-tegra 3130000.serial: RX in PIO mode [2.613202] 3130000.serial: ttyTHS3 at MMIO 0x3130000 (irq = 40, base\_baud = 0) is a TEGRA\_UART [2.623713] Console: switching to colour frame buffer device 240x67 [2.623758] brd: module loaded [2.628573] loop: module loaded [2.628841] nct1008\_nct72 7-004c: find device tree node, parsing dt [2.628845] nct1008\_nct72 7-004c: starting parse dt [2.628934] nct1008\_nct72 7-004c: success parsing dt [2.629048] nct1008\_nct72 7-004c: success in enabling tmp451 VDD rail [2.708431] tegradc 15210000.nvdisplay: fb registered [2.708479] tmp451: Enabled overheat logging at 104.00C [2.708590] nct1008\_nct72 7-004c: nct1008\_probe: initialized [2.724787] PD DISP0 index2 UP [2.725901] THERMAL EST: found 3 subdevs [2.725903] THERMAL EST num\_resources: 0 [2.725906] [THERMAL EST subdev 0] [2.725910] [THERMAL EST subdev 1] [2.725912] [THERMAL EST subdev 2] [2.726125] thermal thermal\_zone8: Registering thermal zone thermal\_zone8 for type thermal-fan-est [2.726126] THERMAL EST: thz register success. [2.726198] THERMAL EST: end of probe, return err: 0 [2.726236] tegra\_profiler: Branch: Dev [2.726237] tegra\_profiler: Version: 1.112 [2.726238] tegra\_profiler: Samples version: 39 [2.726239] tegra\_profiler: IO version: 22 [2.726243] armv8\_pmu: imp: 0x41, idcode: 0x1 [2.726245] armv8\_pmu: [0] arch: AA64 PmuV3 ARM CORTEX-A57, type: 5, ver: 0 [2.726248] armv8\_pmu: imp: 0x4e, idcode: 0x1 [2.726249] armv8\_pmu: [1] arch: AA64 PmuV3 NVIDIA (Denver), type: 6, ver: 0 [2.726251] armv8\_pmu: imp: 0x4e, idcode: 0x1 [2.726253] armv8\_pmu: [2] arch: AA64 PmuV3 NVIDIA (Denver), type: 6, ver: 0 [2.726254] armv8\_pmu: imp: 0x41, idcode: 0x1 [2.726256] armv8\_pmu: [3] arch: AA64 PmuV3 ARM CORTEX-A57, type: 5, ver: 0 [2.726258] armv8\_pmu: imp: 0x41, idcode: 0x1 [2.726260] armv8\_pmu: [4] arch: AA64 PmuV3 ARM CORTEX-A57, type: 5, ver: 0 [2.726262] armv8\_pmu: imp: 0x41, idcode: 0x1 [2.726263] armv8\_pmu: [5] arch: AA64 PmuV3 ARM CORTEX-A57, type: 5, ver: 0 [2.726374] tegra\_profiler: auth: init [2.727068] gk20a 17000000.gp10b: failed to allocate secure buffer -12 [2.729079] tegra-ahci 3507000.ahci-sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode [2.729086] tegra-ahci 3507000.ahci-sata: flags: 64bit ncq sntf pm led pmp pio slum part deso sadm apst [2.729701] scsi host0: tegra\_ahci [2.729925] scsi host1: tegra\_ahci [2.730040] ata1: SATA max UDMA/133 mmio [mem 0x03507000-0x03508fff] port 0x100 irq 25 [2.730042] ata2: DUMMY [2.730775] spi-tegra114 3210000.spi: Static pin configuration used [2.731143] spi-tegra114 c260000.spi: Static pin configuration used [2.731459] spi-tegra114 3240000.spi: Static pin configuration used [2.732060] tun: Universal TUN/TAP device driver, 1.6 [2.732062] tun: (C) 1999-2004 Max Krasnyansky [maxk@qualcomm.com](mailto:maxk@qualcomm.com) [2.732190] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [2.732191] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [2.732217] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k [2.732219] igb: Copyright (c) 2007-2014 Intel Corporation. [2.732994] PPP generic driver version 2.4.2 [2.733083] PPP BSD Compression module registered [2.733087] PPP Deflate Compression module registered [2.733101] PPP MPPE Compression module registered [2.733108] NET: Registered protocol family 24 [2.733146] usbcore: registered new interface driver r8152 [2.733174] usbcore: registered new interface driver asix [2.733197] usbcore: registered new interface driver ax88179\_178a [2.733218] usbcore: registered new interface driver cdc\_ether [2.733247] usbcore: registered new interface driver smsc75xx [2.733268] usbcore: registered new interface driver net1080 [2.733288] usbcore: registered new interface driver cdc\_subset [2.733309] usbcore: registered new interface driver zaurus [2.733346] usbcore: registered new interface driver cdc\_ncm [2.733500] Wake76 for irq=199 [2.733501] Wake77 for irq=199 [2.733503] Wake78 for irq=199 [2.733504] Wake79 for irq=199 [2.733504] Wake80 for irq=199 [2.733505] Wake81 for irq=199 [2.733506] Wake82 for irq=199 [2.733549] tegra-xotg xotg: usb2 phy is not available yet [2.733932] usbcore: registered new interface driver usb-storage [2.733978] usbcore: registered new interface driver usbserial [2.734001] usbcore: registered new interface driver cp210x [2.734016] usbserial: USB Serial support registered for cp210x [2.734035] usbcore: registered new interface driver ftdi\_sio [2.734048] usbserial: USB Serial support registered for FTDI USB Serial Device [2.734067] usbcore: registered new interface driver option [2.734080] usbserial: USB Serial support registered for GSM modem (1-port) [2.734098] usbcore: registered new interface driver pl2303 [2.734115] usbserial: USB Serial support registered for pl2303 [2.734346] tegra-usb-cd usb\_cd: otg phy is not available yet [2.736319] eqos 2490000.ether\_qos: Setting local MAC: 0 4 4b 8d 65 26 [2.736768] libphy: dwc\_phy: probed [2.737211] tegra-xudc-new 3550000.xudc: usb2 phy is not available yet [2.799995] bcm54xx\_low\_power\_mode(): put phy in iddq-lp mode [2.856137] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [2.858335] tegra\_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [2.858347] tegra\_rtc c2a0000.rtc: Tegra internal Real Time Clock [2.858485] i2c /dev entries driver [2.859217] [OV5693]: probing v4l2 sensor. [3.046855] ata1: SATA link down (SStatus 0 SControl 300) [3.291339] PD DISP1 index3 UP [3.296003] PD DISP2 index4 UP [3.311765] Parent Clock set for DC plld2 [3.318233] edid invalid [3.360456] edid invalid [3.364360] edid invalid [3.368248] tegradc 15210000.nvdisplay: hdmi: pclk:148351K, set prod-setting:prod\_c\_150M [3.523074] tegradc 15210000.nvdisplay: blank - normal [3.527272] tegradc 15210000.nvdisplay: blank - powerdown [3.585876] PD DISP2 index4 DOWN [3.587012] PD DISP1 index3 DOWN [3.587621] PD DISP0 index2 DOWN [3.602443] tegradc 15210000.nvdisplay: unblank [3.602550] PD DISP0 index2 UP [3.608916] PD DISP1 index3 UP [3.609448] PD DISP2 index4 UP [3.624993] Parent Clock set for DC plld2 [3.628500] tegradc 15210000.nvdisplay: hdmi: pclk:27027K, set prod-setting:prod\_c\_54M [3.730585] gspca\_main: v2.14.0 registered [3.730627] usbcore: registered new interface driver gspca\_zc3xx [3.730953] max77620-power max77620-power: Event recorder REG\_NVERC : 0x0 [3.732925] FAN dev name: pwm-fan [3.732971] FAN:gpio request success. [3.732977] FAN: can’t find tach\_gpio [3.732999] pwm\_fan\_driver pwm-fan: cap state:7, cap pwm:255 [3.733159] pwm\_fan\_driver pwm-fan: got pwm for fan [3.733163] pwm\_fan\_driver pwm-fan: tach period: 1000 [3.733457] pwm\_fan\_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [3.733460] pwm\_fan\_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2 [3.733464] pwm\_fan\_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2 [3.733467] pwm\_fan\_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2 [3.733469] pwm\_fan\_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [3.733472] pwm\_fan\_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [3.733475] pwm\_fan\_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [3.733478] pwm\_fan\_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [3.733480] pwm\_fan\_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [3.733483] pwm\_fan\_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [3.734218] device-mapper: uevent: version 1.0.3 [3.734388] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: [dm-devel@redhat.com](mailto:dm-devel@redhat.com) [3.734782] sdhci: Secure Digital Host Controller Interface driver [3.734783] sdhci: Copyright(c) Pierre Ossman [3.734786] sdhci-pltfm: SDHCI platform and OF driver helper [3.735091] sdhci-tegra 3460000.sdhci: Parent select= pll\_p rate=408000000 [3.735381] sdhci-tegra 3460000.sdhci: Parent select= pll\_c4\_out0 rate=196249804 [3.735620] sdhci-tegra 3460000.sdhci: Client registration for eMC Successful [3.736805] tegra-se-elp 3ad0000.se\_elp: tegra\_se\_elp\_probe: complete [3.736924] hidraw: raw HID events driver (C) Jiri Kosina [3.738366] usbcore: registered new interface driver usbhid [3.738367] usbhid: USB HID core driver [3.743249] nvadsp 2993000.adsp: in probe()… [3.745179] nvadsp 2993000.adsp: Registering AMC Error Interrupt [3.745205] nvadsp 2993000.adsp: AMC/ARAM initialized. [3.745388] nvadsp 2993000.adsp: nvadsp\_app\_module\_probe [3.746139] Denver: backdoor interface is NOT available. [3.747817] coresight-tmc 8030000.etf: TMC initialized [3.748839] coresight-tmc 8050000.etr: TMC initialized [3.749188] coresight-tpiu 8060000.tpiu: TPIU initialized [3.749636] coresight-funnel 9010000.funnel\_bccplex: FUNNEL initialized [3.750039] coresight-funnel 8010000.funnel\_major: FUNNEL initialized [3.750442] coresight-funnel 8820000.funnel\_minor: FUNNEL initialized [3.750871] coresight-replicator 8040000.replicator: REPLICATOR initialized [3.751460] coresight-etm4x 9840000.ptm: ETM 4.0 initialized [3.751990] coresight-etm4x 9940000.ptm: ETM 4.0 initialized [3.752528] coresight-etm4x 9a40000.ptm: ETM 4.0 initialized [3.753059] coresight-etm4x 9b40000.ptm: ETM 4.0 initialized [3.753083] Module initialized successfully [3.756404] tegra186-cam-rtcpu b000000.rtcpu: Trace buffer configured at IOVA=0xa0000000 [3.757748] tegra186-cam-rtcpu b000000.rtcpu: already unhalted [3.758052] tegra-ivc ivc-b000000.rtcpu: region 0: iova=0xa0110000-0xa011957f size=38272 [3.758431] tegra-ivc ivc-b000000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [3.758474] tegra-ivc ivc-b000000.rtcpu:vinotify@12c0: vinotify: ver=0 grp=1 RX[64x128]=0x1900-0x3980 TX[64x128]=0x3980-0x5a00 [3.758517] tegra-ivc ivc-b000000.rtcpu:mods@32c0: mods: ver=0 grp=1 RX[1x64]=0x5a00-0x5ac0 TX[1x64]=0x5ac0-0x5b80 [3.758557] tegra-ivc ivc-b000000.rtcpu:ivccontrol@52c0: ivccontrol: ver=0 grp=1 RX[16x320]=0x5b80-0x7000 TX[16x320]=0x7000-0x8480 [3.758595] tegra-ivc ivc-b000000.rtcpu:ivccapture@72c0: ivccapture: ver=0 grp=1 RX[16x64]=0x8480-0x8900 TX[16x64]=0x8900-0x8d80 [3.758631] tegra-ivc ivc-b000000.rtcpu:dbg@7c00: dbg: ver=0 grp=1 RX[1x384]=0x8d80-0x8f80 TX[1x384]=0x8f80-0x9180 [3.758670] tegra-ivc ivc-b000000.rtcpu:dbg@7e00: dbg: ver=0 grp=1 RX[1x384]=0x9180-0x9380 TX[1x384]=0x9380-0x9580 [3.758829] tegra186-cam-rtcpu b000000.rtcpu: using cam RTCPU IRQ (52) [3.758832] tegra186-cam-rtcpu b000000.rtcpu: tegra\_camrtc\_mon\_create is successful [3.759851] tegra-ivc ivc-b000000.rtcpu:echo@0: ivc channel driver missing [3.759853] tegra-ivc ivc-b000000.rtcpu:vinotify@12c0: ivc channel driver missing [3.759856] tegra-ivc ivc-b000000.rtcpu:mods@32c0: ivc channel driver missing [3.759858] tegra-ivc ivc-b000000.rtcpu:ivccontrol@52c0: ivc channel driver missing [3.759860] tegra-ivc ivc-b000000.rtcpu:ivccapture@72c0: ivc channel driver missing [3.759862] tegra-ivc ivc-b000000.rtcpu:dbg@7c00: ivc channel driver missing [3.759864] tegra-ivc ivc-b000000.rtcpu:dbg@7e00: ivc channel driver missing [3.759888] tegra186-cam-rtcpu b000000.rtcpu: firmware version cpu=sce cmd=4 sha1=a8b1ecdd9615cd817a56df035be363fce3b0b88f [3.763788] tegra-ivc-cdev ivc-b000000.rtcpu:echo@0: probing /dev/camchar-echo [3.764512] tegra-ivc-cdev ivc-b000000.rtcpu:dbg@7c00: probing /dev/camchar-dbg [3.764605] camchar: rtcpu character device driver loaded [3.764632] random: nonblocking pool is initialized [3.767952] tegra186-aondbg aondbg: aondbg driver probe() OK [3.768186] register\_ari\_mca\_banks: Registered MCA ROC:IOB [3.768272] register\_ari\_mca\_banks: Registered MCA ROC:CCE [3.768598] tegra18-bridge 2390000.axi2apb: bridge probed OK [3.768623] tegra18-bridge 23a0000.axi2apb: bridge probed OK [3.768646] tegra18-bridge 23b0000.axi2apb: bridge probed OK [3.768671] tegra18-bridge 23c0000.axi2apb: bridge probed OK [3.768693] tegra18-bridge 23d0000.axi2apb: bridge probed OK [3.768715] tegra18-bridge 2100000.axip2p: bridge probed OK [3.768737] tegra18-bridge 2110000.axip2p: bridge probed OK [3.768762] tegra18-bridge 2120000.axip2p: bridge probed OK [3.768784] tegra18-bridge 2130000.axip2p: bridge probed OK [3.768806] tegra18-bridge 2140000.axip2p: bridge probed OK [3.768829] tegra18-bridge 2150000.axip2p: bridge probed OK [3.768854] tegra18-bridge 2160000.axip2p: bridge probed OK [3.768879] tegra18-bridge 2170000.axip2p: bridge probed OK [3.768901] tegra18-bridge 2180000.axip2p: bridge probed OK [3.768923] tegra18-bridge 2190000.axip2p: bridge probed OK [3.768972] \*\*\*\* A57 ECC: Enabled [3.768974] tegra18\_a57\_serr\_init: on CPU 4 a A57 Core [3.769119] parse\_throttle\_dt\_data: Num cap clks = 4 [3.769121] parse\_throttle\_dt\_data: clk=mcpu type=1 [3.769123] parse\_throttle\_dt\_data: clk=bcpu type=2 [3.769129] parse\_throttle\_dt\_data: clk=gpu type=4 [3.769131] parse\_throttle\_dt\_data: clk=emc type=3 [3.769560] tegra\_throttle\_probe: probe successful. #cdevs=4 [3.769647] tegra18x\_actmon d230000.actmon: in actmon\_register()… [3.770844] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit with 64 bit addr [3.772049] sdhci-tegra 3440000.sdhci: Parent select= pll\_p rate=408000000 [3.772123] tegra18x\_actmon d230000.actmon: initialization Completed for the device mc\_all [3.772283] sdhci-tegra 3440000.sdhci: Client registration for eMC Successful [3.772479] hw perfevents: enabled with denver15\_uncore\_pmu PMU driver, 3 counters available [3.774542] tegra-se-nvhost 15810000.se: initialized [3.774983] tegra-se-nvhost 15810000.se: tegra\_se\_probe: complete [3.775320] tegra-se-nvhost 15820000.se: initialized [3.775876] tegra-se-nvhost 15820000.se: tegra\_se\_probe: complete [3.776175] tegra-se-nvhost 15830000.se: initialized [3.776281] tegra-se-nvhost 15830000.se: tegra\_se\_probe: complete [3.776563] tegra-se-nvhost 15840000.se: initialized [3.776957] tegra-se-nvhost 15840000.se: tegra\_se\_probe: complete [3.780836] tegra-gpcdma 2600000.dma: GPC DMA driver register 32 channels [3.784233] cpufreq: platform driver Initialization: pass [3.784369] tegra\_cluster\_clk e090000.cluster\_clk\_priv: in probe()… [3.784418] tegra\_cluster\_clk e090000.cluster\_clk\_priv: passed [3.784585] tegra186-padctl 3520000.pinctrl: padctl mmio start 0x0000000003520000 end 0x0000000003520fff [3.784589] tegra186-padctl 3520000.pinctrl: ao mmio start 0x0000000003540000 end 0x0000000003540fff [3.784623] tegra186-padctl 3520000.pinctrl: FUSE\_SKU\_USB\_CALIB\_0 0x2ea896 [3.784627] tegra186-padctl 3520000.pinctrl: FUSE\_USB\_CALIB\_EXT\_0 0x8 [3.785782] tegra186-padctl 3520000.pinctrl: using UTMI port 0 for otg [3.786292] tegra186-padctl 3520000.pinctrl: VBUS over-current detection enabled [3.786800] tegra-bpmp-thermal d000000.bpmp:bpmpthermal: zone 0 not supported [3.788814] cpuidle: Initializing cpuidle driver init for Denver cluster [3.788919] cpuidle: Initializing cpuidle driver init for A57 cluster [3.789784] tachometer tegra-tachometer: Tachometer driver tegra-tachometer registered [3.789788] Tachometer driver initialized with pulse\_per\_rev: 2 and win\_len: 2 [3.792480] tegra210\_adsp\_audio\_platform\_probe: platform probe started [3.793012] tegra210-adsp adsp\_audio: Default param-type to BYTE for mp3-dec1 [3.793229] tegra210-adsp adsp\_audio: Default param-type to BYTE for spkprot [3.793527] tegra210-adsp adsp\_audio: Default param-type to BYTE for src [3.793772] tegra210-adsp adsp\_audio: Default param-type to BYTE for aac-dec1 [3.794068] tegra210-adsp adsp\_audio: Default param-type to BYTE for aec [3.794072] tegra210-adsp adsp\_audio: adma channel page address dt entry not found [3.794073] tegra210-adsp adsp\_audio: using adma channel page 0 [3.804664] tegra210\_adsp\_audio\_platform\_probe probe successfull. [3.804664] input: tegra-hda HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input0 [3.804781] input: tegra-hda HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input1 [3.805184] OPE platform probe [3.805258] OPE platform probe successful [3.806860] mmc1: SDHCI controller on 3440000.sdhci [3440000.sdhci] using ADMA 64-bit with 64 bit addr [3.807095] sdhci-tegra 3400000.sdhci: Got CD GPIO [3.807136] sdhci-tegra 3400000.sdhci: Got WP GPIO [3.807195] sdhci-tegra 3400000.sdhci: Parent select= pll\_p rate=408000000 [3.807216] sdhci-tegra 3400000.sdhci: wakeup init done, cd\_irq: 256 [3.807657] sdhci-tegra 3400000.sdhci: Client registration for eMC Successful [3.840852] mmc0: MAN\_BKOPS\_EN bit is not set [3.846890] mmc2: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit with 64 bit addr [3.848545] mmc0: Skipping tuning since strobe enabled [3.855950] mmc0: periodic cache flush enabled [3.855956] mmc0: new HS400 MMC card at address 0001 [3.856223] mmcblk0: mmc0:0001 032G34 29.1 GiB [3.856341] mmcblk0boot0: mmc0:0001 032G34 partition 1 4.00 MiB [3.856448] mmcblk0boot1: mmc0:0001 032G34 partition 2 4.00 MiB [3.856563] mmcblk0rpmb: mmc0:0001 032G34 partition 3 4.00 MiB [3.857786] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 [3.879845] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF1 \<-\> ADMAIF1 mapping ok [3.879955] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF2 \<-\> ADMAIF2 mapping ok [3.880076] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF3 \<-\> ADMAIF3 mapping ok [3.880180] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF4 \<-\> ADMAIF4 mapping ok [3.880309] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF5 \<-\> ADMAIF5 mapping ok [3.880411] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF6 \<-\> ADMAIF6 mapping ok [3.880538] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF7 \<-\> ADMAIF7 mapping ok [3.880643] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF8 \<-\> ADMAIF8 mapping ok [3.880747] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF9 \<-\> ADMAIF9 mapping ok [3.880850] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF10 \<-\> ADMAIF10 mapping ok [3.880977] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF11 \<-\> ADMAIF11 mapping ok [3.881080] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF12 \<-\> ADMAIF12 mapping ok [3.881184] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF13 \<-\> ADMAIF13 mapping ok [3.881291] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF14 \<-\> ADMAIF14 mapping ok [3.881421] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF15 \<-\> ADMAIF15 mapping ok [3.881526] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF16 \<-\> ADMAIF16 mapping ok [3.881649] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF17 \<-\> ADMAIF17 mapping ok [3.881754] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF18 \<-\> ADMAIF18 mapping ok [3.881855] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF19 \<-\> ADMAIF19 mapping ok [3.881966] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF20 \<-\> ADMAIF20 mapping ok [3.887204] tegra-snd-t186ref-mobile-rt565x sound: ADSP-FE1 \<-\> ADSP PCM1 mapping ok [3.887312] tegra-snd-t186ref-mobile-rt565x sound: ADSP-FE2 \<-\> ADSP PCM2 mapping ok [3.887346] compress asoc: ADSP-FE3 \<-\> ADSP COMPR1 mapping ok [3.887376] compress asoc: ADSP-FE4 \<-\> ADSP COMPR2 mapping ok [3.899248] mmc1: queuing unknown CIS tuple 0x80 (5 bytes) [3.923432] input: tegra-snd-t186ref-mobile-rt565x Headphone Jack as /devices/sound/sound/card1/input2 [3.924243] tegra-snd-t186ref-mobile-rt565x sound: codec-dai “dit-hifi” registered [3.924246] tegra-snd-t186ref-mobile-rt565x sound: This is a dummy codec [3.925040] GACT probability NOT on [3.925050] Mirror/redirect action on [3.925063] u32 classifier [3.925064] Actions configured [3.925094] nf\_conntrack version 0.5.0 (65536 buckets, 262144 max) [3.925737] IPVS: Registered protocols () [3.925766] IPVS: Connection hash table configured (size=4096, memory=64Kbytes) [3.925838] IPVS: Creating netns size=1424 id=0 [3.925866] IPVS: ipvs loaded. [3.925872] IPVS: [rr] scheduler registered. [3.925943] ipip: IPv4 over IPv4 tunneling driver [3.926311] Initializing XFRM netlink socket [3.926737] NET: Registered protocol family 10 [3.927430] ip6\_tables: (C) 2000-2006 Netfilter Core Team [3.927494] NET: Registered protocol family 17 [3.927507] NET: Registered protocol family 15 [3.927530] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br\_netfilter if you need this. [3.927535] 8021q: 802.1Q VLAN Support v1.8 [3.928073] Registered cp15\_barrier emulation handler [3.928087] Registered setend emulation handler [3.930197] registered taskstats version 1 [3.933901] isp 15600000.isp: initialized [3.938040] nvcsi 150c0000.nvcsi: initialized [3.939094] Wake76 for irq=199 [3.939096] Wake77 for irq=199 [3.939097] Wake78 for irq=199 [3.939098] Wake79 for irq=199 [3.939098] Wake80 for irq=199 [3.939099] Wake81 for irq=199 [3.939100] Wake82 for irq=199 [3.939435] xhci-tegra 3530000.xhci: UTMI port 0 has OTG\_CAP [3.939437] xhci-tegra 3530000.xhci: No USB3 port has OTG\_CAP [3.963126] spi-tegra114 3210000.spi: Static pin configuration used [3.963281] xhci-tegra 3530000.xhci: Direct firmware load for tegra18x\_xusb\_firmware failed with error -2 [3.963283] xhci-tegra 3530000.xhci: Falling back to user helper [3.963754] spi-tegra114 c260000.spi: Static pin configuration used [3.964510] spi-tegra114 3240000.spi: Static pin configuration used [3.965265] tegra-xotg xotg: OTG rev:0200, ADP:0, SRP:1, HNP:1, RSP:0 [3.965298] tegra-xotg xotg: update\_id\_state: ID grounded [3.965302] tegra-xotg xotg: update\_vbus\_state: VBUS not detected [3.965314] tegra-xotg xotg: Nvidia XUSB OTG Controller [3.967347] tegra-xotg xotg: otg: gadget gadget registered [3.967349] tegra-xotg xotg: set gadget otg\_caps from OTG controller [3.967350] tegra-xotg xotg: otg: host not registered yet [3.967351] tegra-xotg xotg: otg: start OTG finite state machine [3.967391] tegra-xudc-new 3550000.xudc: entering ELPG [3.967419] tegra-xotg xotg: FSM: can’t move to a\_idle, host isn’t ready [3.967888] tegra-xudc-new 3550000.xudc: entering ELPG done [3.968350] input: gpio-keys as /devices/gpio-keys/input/input3 [4.002548] tegra\_rtc c2a0000.rtc: setting system clock to 2018-02-07 19:55:41 UTC (1518033341) [4.032800] bpmp: mounted debugfs mirror [4.033308] [dram-timers] DRAM derating cdev registered. [4.037846] spmic-ldo0: disabling [4.038023] spmic-ldo1: disabling [4.038169] en-vdd-cam: disabling [4.038171] vdd-usb0-5v: disabling [4.038173] vdd-usb1-5v: disabling [4.038175] en-vdd-disp-3v3: disabling [4.038177] en-mdm-pwr-3v7: disabling [4.038178] en-vdd-disp-1v8: disabling [4.038180] en-vdd-cam-hv-2v8: disabling [4.038181] en-vdd-cam-1v2: disabling [4.038183] vdd-fan: disabling [4.038184] vdd-3v3: disabling [4.038187] en-vdd-vcm-2v8: disabling [4.038188] vdd-usb2-5v: disabling [4.038190] vdd-sys-bl: disabling [4.038192] en-vdd-sys: disabling [4.045138] ALSA device list: [4.045141] #0: tegra-hda at 0x3518000 irq 400 [4.045142] #1: tegra-snd-t186ref-mobile-rt565x [4.046325] tegra-vi4 15700000.vi: initialized [4.047556] tegra-vi4 15700000.vi: subdev 150c0000.nvcsi-2 bound [4.047559] tegra-vi4 15700000.vi: subdev ov5693 2-0036 bound [4.097300] mmc1 tuning done saved tap delay=20 [4.097303] mmc1: hw tuning done … [4.097309] mmc1: tuning\_window[0]: 0xffffffff [4.097316] mmc1: tuning\_window[1]: 0xffffe3ff [4.097321] mmc1: tuning\_window[2]: 0xfc7fffff [4.097345] mmc1: tuning\_window[3]: 0x7fffffff [4.097349] mmc1: tuning\_window[4]: 0x0 [4.097353] mmc1: tuning\_window[5]: 0x0 [4.097357] mmc1: tuning\_window[6]: 0x0 [4.097361] mmc1: tuning\_window[7]: 0x0 [4.097364] sdhci: Tap value: 20 | Trim value: 5 [4.097367] sdhci: SDMMC\_VENDOR\_INTR\_STATUS[0x108]: 0x40000 [4.102830] mmc1: queuing unknown CIS tuple 0x91 (3 bytes) [4.102873] mmc1: new ultra high speed SDR104 SDIO card at address 0001 [6.459295] tegradc 15210000.nvdisplay: hdmi: plugged [6.463932] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [6.463945] VFS: Mounted root (ext4 filesystem) on device 179:1. [6.464987] devtmpfs: mounted [6.465279] Freeing unused kernel memory: 1168K (ffffffc001128000 - ffffffc00124c000) [6.465302] Freeing alternatives memory: 96K (ffffffc00124c000 - ffffffc001264000) [6.529134] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) [6.549692] systemd[1]: Detected architecture arm64. [6.561390] systemd[1]: Set hostname to . [6.688167] systemd[1]: Listening on Journal Audit Socket. [6.695518] systemd[1]: Listening on udev Kernel Socket. [6.702625] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [6.711555] systemd[1]: Listening on Journal Socket (/dev/log). [6.719517] systemd[1]: Listening on Syslog Socket. [6.726553] systemd[1]: Listening on udev Control Socket. [6.734126] systemd[1]: Reached target User and Group Name Lookups. [6.742762] systemd[1]: Created slice User and Session Slice. [6.751590] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [6.764201] systemd[1]: Created slice System Slice. [6.771100] systemd[1]: Created slice system-serial\x2dgetty.slice. [6.778963] systemd[1]: Reached target Slices. [6.784815] systemd[1]: Reached target Swap. [6.790612] systemd[1]: Listening on LVM2 metadata daemon socket. [6.798295] systemd[1]: Listening on Device-mapper event daemon FIFOs. [6.806326] systemd[1]: Reached target Encrypted Volumes. [6.813406] systemd[1]: Listening on Journal Socket. [6.821190] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling… [6.835448] systemd[1]: Starting Create list of required static device nodes for the current kernel… [6.849280] systemd[1]: Mounting Debug File System… [6.863752] systemd[1]: Starting Load Kernel Modules… [6.872304] systemd[1]: Starting Set console keymap… [6.881220] systemd[1]: Mounting POSIX Message Queue File System… [6.890700] systemd[1]: Starting Journal Service… [6.898481] systemd[1]: Starting Remount Root and Kernel File Systems… [6.908784] systemd[1]: Started Braille Device Support. [6.916235] systemd[1]: Reached target Remote File Systems (Pre). [6.924715] systemd[1]: Listening on LVM2 poll daemon socket. [6.932258] systemd[1]: Reached target Remote File Systems. [6.943381] systemd[1]: Mounted Debug File System. [6.950087] systemd[1]: Mounted POSIX Message Queue File System. [6.957974] systemd[1]: Started Journal Service. [7.104191] systemd-journald[286]: Received request to flush runtime journal from PID 1 [7.243928] tegra-pcie 10003000.pcie-controller: 4x1, 1x1 configuration [7.263532] tegra-pcie 10003000.pcie-controller: PCIE: Enable power rails [7.273546] tegra-pcie 10003000.pcie-controller: probing port 0, using 4 lanes [7.284384] tegra-pcie 10003000.pcie-controller: probing port 2, using 1 lanes [7.292725] xhci-tegra 3530000.xhci: cannot find firmware…retry after 1 second [7.448630] dhd\_module\_init in [7.456458] tegra\_net\_perf\_init: cannot get wifi sclk [7.466756] found wifi platform device bcmdhd\_wlan [7.524910] wifi\_platform\_get\_country\_code\_map: could not get country\_code\_map [7.524912] wifi\_plat\_dev\_drv\_probe:platform country code map is not available [7.524924] Power-up adapter ‘DHD generic adapter’ [7.524929] wifi\_platform\_set\_power = 1 [7.718854] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [7.726839] wifi\_platform\_bus\_enumerate device present 1 [7.744807] wifi\_platform\_bus\_enumerate device present 0 [7.745366] F1 signature read @0x18000000=0x17214354 [7.751140] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x1 pkg:0x2 [7.751900] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000 [7.751982] wifi\_platform\_prealloc: failed to alloc static mem section 7 [7.751996] wifi\_platform\_get\_mac\_addr [7.752726] CFG80211-ERROR) wl\_setup\_wiphy : Registering Vendor80211 [7.753413] wl\_create\_event\_handler(): thread:wl\_event\_handler:24b started [7.753491] CFG80211-ERROR) wl\_event\_handler : tsk Enter, tsk = 0xffffffc1e0a01a70 [7.758725] dhd\_attach(): thread:dhd\_watchdog\_thread:24c started [7.765064] dhd\_attach(): thread:dhd\_dpc:255 started [7.765426] dhd\_attach(): thread:dhd\_rxf:259 started [7.765433] dhd\_deferred\_work\_init: work queue initialized [7.765905] Dongle Host Driver, version 1.201.82 (r) Compiled in drivers/net/wireless/bcmdhd on Dec 1 2017 at 06:06:28 [7.766207] tegra\_sysfs\_register [7.766234] Register interface [wlan0] MAC: 00:04:4b:8d:65:24 [7.766237] dhd\_prot\_ioctl : bus is down. we have nothing to do [7.766356] sdhci-tegra 3440000.sdhci: Tuning already done, restoring the best tap value : 20 [7.767398] wifi\_platform\_set\_power = 0 [8.118873] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [8.166565] using random self ethernet address [8.171655] using random host ethernet address [8.188362] Mass Storage Function, version: 2009/09/11 [8.194070] LUN: removable file: (no medium) [8.203223] using random self ethernet address [8.208664] using random host ethernet address [8.219189] usb0: HOST MAC be:7a:8f:f9:62:7d [8.224311] usb0: MAC c6:8e:3e:60:d9:80 [8.224782] usb1: HOST MAC 8e:e7:71:b4:e3:36 [8.224795] usb1: MAC b6:fc:88:96:67:77 [8.224809] tegra-xudc-new 3550000.xudc: exiting ELPG [8.225784] tegra-xudc-new 3550000.xudc: exiting ELPG done [8.225797] tegra-xudc-new 3550000.xudc: ep 0 (type: 0, dir: out) enabled [8.226330] tegra-xudc-new 3550000.xudc: entering ELPG [8.227319] tegra-xudc-new 3550000.xudc: entering ELPG done [8.251076] device usb0 entered promiscuous mode [8.257205] IPv6: ADDRCONF(NETDEV\_UP): usb0: link is not ready [8.261458] device usb1 entered promiscuous mode [8.265177] IPv6: ADDRCONF(NETDEV\_UP): usb1: link is not ready [8.265181] l4tbr0: port 2(usb1) entered forwarding state [8.265188] l4tbr0: port 2(usb1) entered forwarding state [8.300738] xhci-tegra 3530000.xhci: Firmware timestamp: 2017-03-31 06:21:56 UTC, Version: 55.07 release [8.302782] xhci-tegra 3530000.xhci: xHCI Host Controller [8.302798] xhci-tegra 3530000.xhci: new USB bus registered, assigned bus number 1 [8.303635] xhci-tegra 3530000.xhci: hcc params 0x0184fd25 hci version 0x100 quirks 0x00010810 [8.303659] xhci-tegra 3530000.xhci: irq 59, io mem 0x03530000 [8.303787] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [8.303789] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [8.303791] usb usb1: Product: xHCI Host Controller [8.303793] usb usb1: Manufacturer: Linux 4.4.38-tegra xhci-hcd [8.303794] usb usb1: SerialNumber: 3530000.xhci [8.304070] hub 1-0:1.0: USB hub found [8.304091] hub 1-0:1.0: 4 ports detected [8.335007] xhci-tegra 3530000.xhci: xHCI Host Controller [8.335013] xhci-tegra 3530000.xhci: new USB bus registered, assigned bus number 2 [8.335119] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [8.335121] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [8.335123] usb usb2: Product: xHCI Host Controller [8.335125] usb usb2: Manufacturer: Linux 4.4.38-tegra xhci-hcd [8.335126] usb usb2: SerialNumber: 3530000.xhci [8.335371] hub 2-0:1.0: USB hub found [8.335388] hub 2-0:1.0: 3 ports detected [8.335754] tegra-xotg xotg: otg: host 3530000.xhci registered [8.347024] extcon-gpio-states external-connection:extcon@1: Cable state 2 [8.530841] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [8.540486] tegra-pcie 10003000.pcie-controller: link 0 down, ignoring [8.618849] usb 1-1: new high-speed USB device number 2 using xhci-tegra [8.756530] usb 1-1: feature bit otg\_vbus\_off set [8.762157] usb 1-1: New USB device found, idVendor=03e7, idProduct=2150 [8.769782] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [8.777903] usb 1-1: Product: Movidius MA2X5X [8.783166] usb 1-1: Manufacturer: Movidius Ltd. [8.788758] usb 1-1: SerialNumber: 03e72150 [8.794355] xhci-tegra 3530000.xhci: tegra\_xhci\_mbox\_work mailbox command 6 [8.921947] IPVS: Creating netns size=1424 id=1 [8.986967] IPv6: ADDRCONF(NETDEV\_UP): wlan0: link is not ready [8.992858] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [8.999541] Dongle Host Driver, version 1.201.82 (r) Compiled in drivers/net/wireless/bcmdhd on Dec 1 2017 at 06:06:28 [9.013230] wl\_android\_wifi\_on in [9.016577] wifi\_platform\_set\_power = 1 [9.061279] tegradc 15210000.nvdisplay: blank - powerdown [9.116938] PD DISP2 index4 DOWN [9.117041] PD DISP1 index3 DOWN [9.117127] PD DISP0 index2 DOWN [9.133204] tegradc 15210000.nvdisplay: unblank [9.133218] PD DISP0 index2 UP [9.134252] PD DISP1 index3 UP [9.134342] PD DISP2 index4 UP [9.135977] Parent Clock set for DC plld2 [9.139155] tegradc 15210000.nvdisplay: hdmi: pclk:148500K, set prod-setting:prod\_c\_150M [9.295257] mmc1: queuing unknown CIS tuple 0x80 (5 bytes) [9.360704] sdhci-tegra 3440000.sdhci: Tuning already done, restoring the best tap value : 20 [9.361102] F1 signature read @0x18000000=0x17214354 [9.364405] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x1 pkg:0x2 [9.364868] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000 [9.394476] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [9.412397] dhdsdio\_write\_vars: Download, Upload and compare of NVRAM succeeded. [9.454133] dhd\_bus\_init: enable 0x06, ready 0x06 (waited 0us) [9.454358] Enabling wake69 [9.455268] wifi\_platform\_get\_mac\_addr [9.456717] Firmware up: op\_mode=0x0005, MAC=00:04:4b:8d:65:24 [9.461929] dhd\_preinit\_ioctls pspretend\_threshold for HostAPD failed -23 [9.466075] Firmware version = wl0: May 4 2017 13:48:00 version 7.35.221.21 (r697384) FWID 01-58d9d0b3 [9.468218] dhd\_interworking\_enable: failed to set WNM info, ret=-23 [9.468402] tegra\_sysfs\_on [9.518016] l4tbr0: port 2(usb1) entered disabled state [9.540083] IPv6: ADDRCONF(NETDEV\_UP): eth0: link is not ready [9.542573] IPv6: ADDRCONF(NETDEV\_UP): eth0: link is not ready [9.642165] CFGP2P-ERROR) wl\_cfgp2p\_add\_p2p\_disc\_if : P2P interface registered [9.650519] WLC\_E\_IF: NO\_IF set, event Ignored [9.798890] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [9.800915] tegra-pcie 10003000.pcie-controller: link 2 down, ignoring [9.800921] tegra-pcie 10003000.pcie-controller: PCIE: no end points detected [9.801084] tegra-pcie 10003000.pcie-controller: PCIE: Disable power rails [9.827053] cfg80211: World regulatory domain updated: [9.827058] cfg80211: DFS Master region: unset [9.827058] cfg80211: (start\_freq - end\_freq @ bandwidth), (max\_antenna\_gain, max\_eirp), (dfs\_cac\_time) [9.827061] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [9.827063] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [9.827065] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [9.827067] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [9.827069] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [9.827071] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [9.827072] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [9.827074] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [9.982748] xhci-tegra 3530000.xhci: tegra\_xhci\_mbox\_work mailbox command 5 [9.982751] xhci-tegra 3530000.xhci: tegra\_xhci\_mbox\_work ignore firmware MBOX\_CMD\_DEC\_SSPI\_CLOCK request [10.429132] tegradc 15210000.nvdisplay: unblank [10.732247] tegradc 15210000.nvdisplay: blank - powerdown [10.793898] PD DISP2 index4 DOWN [10.793987] PD DISP1 index3 DOWN [10.794059] PD DISP0 index2 DOWN [10.816461] tegradc 15210000.nvdisplay: unblank [10.816474] PD DISP0 index2 UP [10.817353] PD DISP1 index3 UP [10.817430] PD DISP2 index4 UP [10.818783] Parent Clock set for DC plld2 [10.821593] tegradc 15210000.nvdisplay: hdmi: pclk:27027K, set prod-setting:prod\_c\_54M [11.927130] gk20a 17000000.gp10b: railgate is disabled. [11.974168] tegradc 15210000.nvdisplay: blank - powerdown [12.043009] PD DISP2 index4 DOWN [12.043094] PD DISP1 index3 DOWN [12.043167] PD DISP0 index2 DOWN [12.060658] tegradc 15210000.nvdisplay: unblank [12.060677] PD DISP0 index2 UP [12.061739] PD DISP1 index3 UP [12.061828] PD DISP2 index4 UP [12.063529] Parent Clock set for DC plld2 [12.066910] tegradc 15210000.nvdisplay: hdmi: pclk:148500K, set prod-setting:prod\_c\_150M [12.460885] eqos 2490000.ether\_qos eth0: Link is Up - 1Gbps/Full - flow control off [12.462110] IPv6: ADDRCONF(NETDEV\_CHANGE): eth0: link becomes ready [13.126766] tegradc 15210000.nvdisplay: unblank [13.170961] CPU1: shutdown [13.173817] psci: CPU1 killed. [13.202851] CPU2: shutdown [ 13.20557 ---
**Author:** ![linuxdev](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/linuxdev/32/10243_2.png) [@linuxdev](https://forums.developer.nvidia.com/u/linuxdev)\ **Post date:** [February 8, 2018, 9:52pm UTC](https://forums.developer.nvidia.com/t/tx2-sd-card-slot/51397/11 "2018-02-08T21:52:05Z")
I could be wrong, but I don’t think UHS-1 is supported. Do you have an older SDHC card you could test with just to verify basic function? What is the capacity of the card you have? ---
**Author:** ![Andrey1984](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/andrey1984/32/14130_2.png) [@Andrey1984](https://forums.developer.nvidia.com/u/Andrey1984)\ **Post date:** [February 8, 2018, 10:08pm UTC](https://forums.developer.nvidia.com/t/tx2-sd-card-slot/51397/12 "2018-02-08T22:08:37Z")
UHS-I only [url][TX2 SD card slot - Jetson TX2 - NVIDIA Developer Forums](https://devtalk.nvidia.com/default/topic/1017109/jetson-tx2/tx2-sd-card-slot/post/5180808/#5180808%5B/url%5D) ---
**Author:** ![zobertke](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@zobertke](https://forums.developer.nvidia.com/u/zobertke)\ **Post date:** [February 9, 2018, 2:47pm UTC](https://forums.developer.nvidia.com/t/tx2-sd-card-slot/51397/13 "2018-02-09T14:47:39Z")
Actually I have tried a 16GB UHS-I and a 32GB UHS-I kingston card. None worked. Did not try an older SDHC though. I don’t have one. Will try to find one, but I am afraid the UHS-I should have worked too as per the specification. ---
**Author:** ![zobertke](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@zobertke](https://forums.developer.nvidia.com/u/zobertke)\ **Post date:** [February 12, 2018, 8:47pm UTC](https://forums.developer.nvidia.com/t/tx2-sd-card-slot/51397/14 "2018-02-12T20:47:03Z")
Tried a regular SDHC but it is the same error message. The board might have issues. Do you know where I can report a hardware failure? ---
**Author:** ![Andrey1984](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/andrey1984/32/14130_2.png) [@Andrey1984](https://forums.developer.nvidia.com/u/Andrey1984)\ **Post date:** [February 12, 2018, 9:52pm UTC](https://forums.developer.nvidia.com/t/tx2-sd-card-slot/51397/15 "2018-02-12T21:52:55Z")
Did you try to re-flash your board? If re-flash doesn’t help, you may try to contact the merchant who did sell the board to you. ---
**Author:** ![linuxdev](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/linuxdev/32/10243_2.png) [@linuxdev](https://forums.developer.nvidia.com/u/linuxdev)\ **Post date:** [February 12, 2018, 11:02pm UTC](https://forums.developer.nvidia.com/t/tx2-sd-card-slot/51397/16 "2018-02-12T23:02:22Z")
It does sound like an actual hardware failure…but the re-flash would be a fairly useful step to know for sure. If you do need to RMA look near the top of this for “RMA”: [url][https://devtalk.nvidia.com/default/topic/793798/embedded-systems/some-jetson-web-links/[/url]](https://devtalk.nvidia.com/default/topic/793798/embedded-systems/some-jetson-web-links/%5B/url%5D) ---
**Author:** ![zobertke](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@zobertke](https://forums.developer.nvidia.com/u/zobertke)\ **Post date:** [February 19, 2018, 8:53am UTC](https://forums.developer.nvidia.com/t/tx2-sd-card-slot/51397/17 "2018-02-19T08:53:06Z")
Did the re-flash part couple of times. I will probably proceed with the RMA. Thank you. ---
**Author:** ![nadeemm](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/nadeemm/32/367020_2.png) [@nadeemm](https://forums.developer.nvidia.com/u/nadeemm)\ **Post date:** [October 18, 2021, 6:28pm UTC](https://forums.developer.nvidia.com/t/tx2-sd-card-slot/51397/18 "2021-10-18T18:28:11Z")