TX2 shuts down during boot on custom carrier board

Autonomous Machines Jetson & Embedded Systems Jetson TX2
1

I am trying to get a TX2 module with Jetpack 3.2.1 to work on a custom developed carrier board, but the TX2 module shuts down during boot. The same module boots normally on the development board. I have also tried using a TX1 module on the custom board which works just fine.
Can somebody give me a hint to what might be the root cause? The last entry in the log before the module shuts down is “systemd-journald[286]: Received request to flush runtime journal from PID 1”.

Thanks
Andreas

tx2_boot_shutdown.txt (71.5 KB)

2

Is this the full log or just being cut due to the length limitation of forum…?

3

Sorry, the full log is attached in my original post now.

4

We have discovered that the issue was related to an error in the carrier board design.