UART problem for Auvidea J120+TX2

hello! I want to use the UART of Auvidea J120 and TX2. but i don’t know physically where is the uart port on J120. besides, i see /dev/ttyTHS1, /dev/ttyTHS2, /dev/ttyTHS3. don’t know which port could I use?

Hi yangyangcv,

You should try to contact with Auvidea to get the support.

Cheers

Hello yangyangcv,

For UART2 used to port dev/ttyTHS1, and UART0 used /dev/ttyS0,