Unable to boot jetson xavier nx development kit

Robotics & Edge Computing Jetson & Embedded Systems Jetson Xavier NX
1

I’m trying to boot my NVIDIA Jetson Xavier NX Developer Kit from a microSD card, but I’m running into a problem. Here’s what happens:

  1. I’ve prepared the microSD card with jetpack 6.2 image
  2. On power-up (with HDMI and keyboard connected directly to the Xavier NX), the “Boot Manager” menu appears.
  3. When I select UEFI SD Device, a very brief error message flashes on the screen (too fast to read), and I’m immediately returned to the same Boot Manager menu.
  4. WhatsApp Görsel 2025-05-05 saat 21.33.22_ad89e7a2
    WhatsApp Görsel 2025-05-05 saat 21.33.22_ad89e7a2792×1408 82 KB

    What could be issue? Could you help me please
3

Hi,

Xavier NX not support JP6.2, but support JP5.1.5
Please refer to the JetPack Archive | NVIDIA Developer to get more detail.

Thanks

4

IMG_20250513_130444_1
IMG_20250513_130444_11920×1083 103 KB

I downloaded JetPack 5.1.5, and now this screen appears and then Xavier suddenly shuts down. I mean screen is gone and fans don’t work but the green light is still on. What should I do?

5

Dump out the log and it will tell us what is wrong.

6

Unfortunately, I don’t have the cable shown in the video. Do you have any other solution suggestions?

7

Nope. Please get this cable. This cable is helpful for any Jetson problem you may hit in future.

9

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.