Unable to flash Jetson Xavier

My team and I are developing for Jetson AGX Xavier. So far my entire team is able to flash successfully their Xavier modules but I am unable to. We’re doing this over USB. On my laptop alone it always follows this output where it hangs indefinitely.

Any advice as to what could be going wrong would be appreciated!

Welcome to Tegra Flash
version 1.0.0
Type ? or help for help and q or quit to exit
Use ! to execute system commands

[ 0.0035 ] Generating RCM messages
[ 0.0043 ] tegrahost_v2 --chip 0x19 0 --magicid MB1B --appendsigheader mb1_t194_prod.bin zerosbk
[ 0.0050 ] Header already present for mb1_t194_prod.bin
[ 0.0080 ]
[ 0.0087 ] tegrasign_v2 --key None --getmode mode.txt
[ 0.0094 ] Assuming zero filled SBK key
[ 0.0095 ]
[ 0.0108 ] tegrasign_v2 --key None --file mb1_t194_prod_sigheader.bin --offset 2960 --length 1136 --pubkeyhash pub_key.key
[ 0.0114 ] Assuming zero filled SBK key
[ 0.0119 ]
[ 0.0126 ] tegrahost_v2 --chip 0x19 0 --updatesigheader mb1_t194_prod_sigheader.bin mb1_t194_prod_sigheader.hash zerosbk
[ 0.0163 ]
[ 0.0185 ] tegrabct_v2 --chip 0x19 0 --sfuse tegra194-mb1-soft-fuses-l4t.cfg.pdf sfuse.bin
[ 0.0194 ]
[ 0.0202 ] tegrarcm_v2 --listrcm rcm_list.xml --chip 0x19 0 --sfuses sfuse.bin --download rcm mb1_t194_prod_sigheader.bin 0 0
[ 0.0209 ] RCM 0 is saved as rcm_0.rcm
[ 0.0250 ] RCM 1 is saved as rcm_1.rcm
[ 0.0250 ] RCM 2 is saved as rcm_2.rcm
[ 0.0250 ] List of rcm files are saved in rcm_list.xml
[ 0.0250 ]
[ 0.0251 ] Signing RCM messages
[ 0.0260 ] tegrasign_v2 --key None --list rcm_list.xml --pubkeyhash pub_key.key --getmontgomeryvalues montgomery.bin
[ 0.0267 ] Assuming zero filled SBK key
[ 0.0273 ]
[ 0.0273 ] Copying signature to RCM mesages
[ 0.0281 ] tegrarcm_v2 --chip 0x19 0 --updatesig rcm_list_signed.xml
[ 0.0293 ]
[ 0.0294 ] Boot Rom communication
[ 0.0302 ] tegrarcm_v2 --chip 0x19 0 --rcm rcm_list_signed.xml --skipuid
[ 0.0308 ] RCM version 0X190001
[ 0.0318 ] Boot Rom communication completed
[ 1.0470 ]
[ 2.0520 ] tegrarcm_v2 --isapplet
[ 2.0543 ] Applet version 01.00.0000
[ 2.0763 ]
[ 2.0783 ] tegrarcm_v2 --ismb2
[ 2.1126 ]
[ 2.1163 ] tegrahost_v2 --chip 0x19 --align nvtboot_applet_t194.bin
[ 2.1194 ]
[ 2.1226 ] tegrahost_v2 --chip 0x19 0 --magicid PLDT --appendsigheader nvtboot_applet_t194.bin zerosbk
[ 2.1252 ] adding BCH for nvtboot_applet_t194.bin
[ 2.1353 ]
[ 2.1420 ] tegrasign_v2 --key None --list nvtboot_applet_t194_sigheader.bin_list.xml --pubkeyhash pub_key.key
[ 2.1450 ] Assuming zero filled SBK key
[ 2.1467 ]
[ 2.1508 ] tegrahost_v2 --chip 0x19 0 --updatesigheader nvtboot_applet_t194_sigheader.bin.encrypt nvtboot_applet_t194_sigheader.bin.hash zerosbk
[ 2.1562 ]
[ 2.1581 ] tegrarcm_v2 --download mb2 nvtboot_applet_t194_sigheader.bin.encrypt
[ 2.1595 ] Applet version 01.00.0000
[ 2.1762 ] Sending mb2
[ 2.1763 ] […] 100%
[ 2.1891 ]
[ 2.1912 ] tegrarcm_v2 --boot recovery
[ 2.1921 ] Applet version 01.00.0000
[ 2.2120 ]
[ 3.2165 ] tegrarcm_v2 --isapplet
[ 3.2366 ]
[ 3.2378 ] tegrarcm_v2 --ismb2
[ 3.2392 ] MB2 Applet version 01.00.0000
[ 3.2732 ]
[ 3.2772 ] tegrarcm_v2 --ismb2
[ 3.2800 ] MB2 Applet version 01.00.0000
[ 3.3135 ]
[ 3.3171 ] Retrieving EEPROM data
[ 3.3176 ] tegrarcm_v2 --oem platformdetails eeprom cvm /home/royaloak/royaloak_bsp/rootfs/build/tmp/deploy/images/dcm/temp/cvm.bin.zTm7b
[ 3.3208 ] MB2 Applet version 01.00.0000
[ 3.3599 ] Saved platform info in /home/royaloak/royaloak_bsp/rootfs/build/tmp/deploy/images/dcm/temp/cvm.bin.zTm7b
[ 3.3939 ]
[ 3.3943 ] Rebooting to recovery mode
[ 3.3978 ] tegrarcm_v2 --ismb2
[ 3.4006 ] MB2 Applet version 01.00.0000
[ 3.4172 ]
[ 3.4173 ] Rebooting to recovery mode
[ 3.4208 ] tegrarcm_v2 --reboot recovery
[ 3.4240 ] MB2 Applet version 01.00.0000
[ 3.4682 ]
Welcome to Tegra Flash
version 1.0.0
Type ? or help for help and q or quit to exit
Use ! to execute system commands

[ 0.0007 ] tegrasign_v2 --key None --getmode mode.txt
[ 0.0013 ] Assuming zero filled SBK key
[ 0.0014 ]
[ 0.0015 ] Generating RCM messages
[ 0.0021 ] tegrahost_v2 --chip 0x19 0 --magicid MB1B --appendsigheader mb1_t194_prod.bin zerosbk
[ 0.0026 ] Header already present for mb1_t194_prod.bin
[ 0.0051 ]
[ 0.0057 ] tegrasign_v2 --key None --getmode mode.txt
[ 0.0063 ] Assuming zero filled SBK key
[ 0.0064 ]
[ 0.0072 ] tegrasign_v2 --key None --file mb1_t194_prod_sigheader.bin --offset 2960 --length 1136 --pubkeyhash pub_key.key
[ 0.0077 ] Assuming zero filled SBK key
[ 0.0081 ]
[ 0.0088 ] tegrahost_v2 --chip 0x19 0 --updatesigheader mb1_t194_prod_sigheader.bin mb1_t194_prod_sigheader.hash zerosbk
[ 0.0118 ]
[ 0.0128 ] tegrabct_v2 --chip 0x19 0 --sfuse tegra194-mb1-soft-fuses-l4t.cfg sfuse.bin
[ 0.0136 ]
[ 0.0143 ] tegrarcm_v2 --listrcm rcm_list.xml --chip 0x19 0 --sfuses sfuse.bin --download rcm mb1_t194_prod_sigheader.bin 0 0
[ 0.0152 ] RCM 0 is saved as rcm_0.rcm
[ 0.0188 ] RCM 1 is saved as rcm_1.rcm
[ 0.0189 ] RCM 2 is saved as rcm_2.rcm
[ 0.0189 ] List of rcm files are saved in rcm_list.xml
[ 0.0189 ]
[ 0.0190 ] Signing RCM messages
[ 0.0198 ] tegrasign_v2 --key None --list rcm_list.xml --pubkeyhash pub_key.key --getmontgomeryvalues montgomery.bin
[ 0.0204 ] Assuming zero filled SBK key
[ 0.0210 ]
[ 0.0210 ] Copying signature to RCM mesages
[ 0.0217 ] tegrarcm_v2 --chip 0x19 0 --updatesig rcm_list_signed.xml
[ 0.0228 ]
[ 0.0229 ] Parsing partition layout
[ 0.0236 ] tegraparser_v2 --pt flash.xml.tmp
[ 0.0248 ]
[ 0.0248 ] Creating list of images to be signed
[ 0.0254 ] tegrahost_v2 --chip 0x19 0 --partitionlayout flash.xml.bin --list images_list.xml zerosbk
[ 0.0260 ] MB1: Nvheader already present is mb1_t194_prod.bin
[ 0.0264 ] Header already present for mb1_t194_prod_sigheader.bin
[ 0.0268 ] MB1: Nvheader already present is mb1_t194_prod.bin
[ 0.0304 ] Header already present for mb1_t194_prod_sigheader.bin
[ 0.0313 ] adding BCH for spe_t194.bin
[ 0.0343 ] adding BCH for spe_t194.bin
[ 0.0364 ] adding BCH for nvtboot_t194.bin
[ 0.0389 ] adding BCH for nvtboot_t194.bin
[ 0.0423 ] Header already present for preboot_c10_prod_cr.bin
[ 0.0459 ] Header already present for preboot_c10_prod_cr.bin
[ 0.0462 ] Header already present for mce_c10_prod_cr.bin
[ 0.0465 ] Header already present for mce_c10_prod_cr.bin
[ 0.0480 ] adding BCH for mts_c10_prod_cr.bin
[ 0.0512 ] adding BCH for mts_c10_prod_cr.bin
[ 0.1171 ] adding BCH for cboot_t194.bin
[ 0.1818 ] adding BCH for cboot_t194.bin
[ 0.1896 ] adding BCH for tegra194-p2888-0001-royaloak-dcm.dtb
[ 0.1998 ] adding BCH for tegra194-p2888-0001-royaloak-dcm.dtb
[ 0.2035 ] adding BCH for tos-trusty_t194.img
[ 0.2073 ] adding BCH for tos-trusty_t194.img
[ 0.2140 ] adding BCH for eks.img
[ 0.2206 ] adding BCH for eks.img
[ 0.2207 ] adding BCH for bpmp_t194.bin
[ 0.2212 ] adding BCH for bpmp_t194.bin
[ 0.2368 ] adding BCH for tegra194-a02-bpmp-p2888-a04.dtb
[ 0.2539 ] adding BCH for tegra194-a02-bpmp-p2888-a04.dtb
[ 0.2629 ] adding BCH for camera-rtcpu-rce.img
[ 0.2720 ] adding BCH for camera-rtcpu-rce.img
[ 0.2775 ] adding BCH for adsp-fw.bin
[ 0.2833 ] adding BCH for adsp-fw.bin
[ 0.2852 ] Header already present for warmboot_t194_prod.bin
[ 0.2874 ] Header already present for warmboot_t194_prod.bin
[ 0.2881 ] adding BCH for Image-initramfs-dcm.cboot
[ 0.3079 ] adding BCH for Image-initramfs-dcm.cboot
[ 0.9432 ] adding BCH for tegra194-p2888-0001-royaloak-dcm.dtb
[ 1.5780 ] adding BCH for tegra194-p2888-0001-royaloak-dcm.dtb
[ 1.6392 ]
[ 1.6393 ] Filling MB1 storage info
[ 1.6393 ] Generating br-bct
[ 1.6408 ] Performing cfg overlay
[ 1.6409 ] [‘dcm.cfg’, ‘dcm-override.cfg’]
[ 1.6415 ] sw_memcfg_overlay.pl -c dcm.cfg -s dcm-override.cfg -o /home/royaloak/royaloak_bsp/rootfs/build/tmp/deploy/images/dcm/temp/831/tmp6uq_cfud1.cfg
[ 1.6922 ]
[ 1.6924 ] Updating dev and MSS params in BR BCT
[ 1.6924 ] tegrabct_v2 --dev_param tegra194-br-bct-sdmmc.cfg --sdram /home/royaloak/royaloak_bsp/rootfs/build/tmp/deploy/images/dcm/temp/831/tmp6uq_cfud1.cfg --brbct br_bct.cfg --sfuse tegra194-mb1-soft-fuses-l4t.cfg --chip 0x19 0
[ 1.7391 ]
[ 1.7392 ] Updating bl info
[ 1.7400 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x19 0 --updateblinfo flash.xml.bin
[ 1.7417 ]
[ 1.7417 ] Generating signatures
[ 1.7424 ] tegrasign_v2 --key None --list images_list.xml --pubkeyhash pub_key.key
[ 1.7430 ] Assuming zero filled SBK key
[ 1.9030 ]
[ 1.9031 ] Generating br-bct
[ 1.9047 ] Performing cfg overlay
[ 1.9048 ] [’/home/royaloak/royaloak_bsp/rootfs/build/tmp/deploy/images/dcm/temp/831/tmp6uq_cfud1.cfg’]
[ 1.9049 ] Updating dev and MSS params in BR BCT
[ 1.9050 ] tegrabct_v2 --dev_param tegra194-br-bct-sdmmc.cfg --sdram /home/royaloak/royaloak_bsp/rootfs/build/tmp/deploy/images/dcm/temp/831/tmp6uq_cfud1.cfg --brbct br_bct.cfg --sfuse tegra194-mb1-soft-fuses-l4t.cfg --chip 0x19 0
[ 1.9814 ]
[ 1.9814 ] Updating bl info
[ 1.9822 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x19 0 --updateblinfo flash.xml.bin --updatesig images_list_signed.xml
[ 1.9847 ]
[ 1.9847 ] Updating smd info
[ 1.9853 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x19 --updatesmdinfo flash.xml.bin
[ 1.9861 ]
[ 1.9861 ] Updating Odmdata
[ 1.9868 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x19 0 --updatefields Odmdata =0x9190000
[ 1.9876 ]
[ 1.9876 ] Get Signed section of bct
[ 1.9884 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x19 0 --listbct bct_list.xml
[ 1.9891 ]
[ 1.9897 ] tegrasign_v2 --key None --list bct_list.xml --pubkeyhash pub_key.key --getmontgomeryvalues montgomery.bin
[ 1.9903 ] Assuming zero filled SBK key
[ 1.9905 ]
[ 1.9905 ] Updating BCT with signature
[ 1.9913 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x19 0 --updatesig bct_list_signed.xml
[ 1.9921 ]
[ 1.9921 ] Generating coldboot mb1-bct
[ 1.9929 ] tegrabct_v2 --chip 0x19 0 --mb1bct mb1_cold_boot_bct.cfg --sdram /home/royaloak/royaloak_bsp/rootfs/build/tmp/deploy/images/dcm/temp/831/tmp6uq_cfud1.cfg --misc tegra194-mb1-bct-misc-l4t.cfg --scr tegra194-mb1-bct-scr-cbb-mini.cfg --pinmux tegra19x-mb1-pinmux-p2888-0000-a04-royaloak-dcm.cfg --pmc tegra19x-mb1-padvoltage-p2888-0000-a00-royaloak-dcm.cfg --pmic tegra194-mb1-bct-pmic-p2888-0001-a04-royaloak-dcm.cfg --brcommand tegra194-mb1-bct-reset-p2888-0000-p2822-0000.cfg --prod tegra19x-mb1-prod-p2888-0000-p2822-0000.cfg --gpioint tegra194-mb1-bct-gpioint-p2888-0000-p2822-0000.cfg --uphy tegra194-mb1-uphy-lane-p2888-0000-p2822-0000.cfg --device tegra19x-mb1-bct-device-sdmmc.cfg
[ 1.9935 ] MB1-BCT version: 0x1

[ 1.9939 ] Parsing config file :tegra19x-mb1-pinmux-p2888-0000-a04-royaloak-dcm.cfg
[ 1.9944 ] Added Platform Config 0 data with size :- 2144

[ 1.9958 ] Parsing config file :tegra194-mb1-bct-scr-cbb-mini.cfg
[ 1.9965 ] Added Platform Config 1 data with size :- 19640

[ 2.0107 ] Parsing config file :tegra19x-mb1-padvoltage-p2888-0000-a00-royaloak-dcm.cfg
[ 2.0113 ] Added Platform Config 2 data with size :- 24

[ 2.0118 ] Parsing config file :tegra194-mb1-bct-pmic-p2888-0001-a04-royaloak-dcm.cfg
[ 2.0125 ] Added Platform Config 4 data with size :- 348

[ 2.0128 ] Parsing config file :tegra194-mb1-bct-reset-p2888-0000-p2822-0000.cfg
[ 2.0130 ] Added Platform Config 3 data with size :- 92
[ 2.0130 ]
[ 2.0130 ] Parsing config file :tegra19x-mb1-prod-p2888-0000-p2822-0000.cfg
[ 2.0130 ] Added Platform Config 5 data with size :- 56
[ 2.0130 ]
[ 2.0130 ] Parsing config file :tegra194-mb1-bct-gpioint-p2888-0000-p2822-0000.cfg
[ 2.0131 ] Added Platform Config 7 data with size :- 392
[ 2.0131 ]
[ 2.0131 ] Parsing config file :tegra194-mb1-uphy-lane-p2888-0000-p2822-0000.cfg
[ 2.0131 ] Added Platform Config 8 data with size :- 12
[ 2.0131 ]
[ 2.0131 ] Parsing config file :tegra19x-mb1-bct-device-sdmmc.cfg
[ 2.0131 ] Added Platform Config 9 data with size :- 32
[ 2.0131 ]
[ 2.0131 ] Updating mb1-bct with firmware information
[ 2.0140 ] tegrabct_v2 --chip 0x19 --mb1bct mb1_cold_boot_bct_MB1.bct --updatefwinfo flash.xml.bin
[ 2.0147 ] MB1-BCT version: 0x1
[ 2.0151 ]
[ 2.0151 ] Updating mb1-bct with storage information
[ 2.0172 ] tegrabct_v2 --chip 0x19 --mb1bct mb1_cold_boot_bct_MB1.bct --updatestorageinfo flash.xml.bin
[ 2.0180 ] MB1-BCT version: 0x1
[ 2.0184 ]
[ 2.0194 ] tegrahost_v2 --chip 0x19 --align mb1_cold_boot_bct_MB1.bct
[ 2.0202 ]
[ 2.0209 ] tegrahost_v2 --chip 0x19 0 --magicid MBCT --appendsigheader mb1_cold_boot_bct_MB1.bct zerosbk
[ 2.0215 ] adding BCH for mb1_cold_boot_bct_MB1.bct
[ 2.0223 ]
[ 2.0232 ] tegrasign_v2 --key None --list mb1_cold_boot_bct_MB1_sigheader.bct_list.xml --pubkeyhash pub_key.key
[ 2.0239 ] Assuming zero filled SBK key
[ 2.0241 ]
[ 2.0250 ] tegrahost_v2 --chip 0x19 0 --updatesigheader mb1_cold_boot_bct_MB1_sigheader.bct.encrypt mb1_cold_boot_bct_MB1_sigheader.bct.hash zerosbk
[ 2.0260 ]
[ 2.0261 ] Generating recovery mb1-bct
[ 2.0271 ] tegrabct_v2 --chip 0x19 0 --mb1bct mb1_bct.cfg --sdram /home/royaloak/royaloak_bsp/rootfs/build/tmp/deploy/images/dcm/temp/831/tmp6uq_cfud1.cfg --misc tegra194-mb1-bct-misc-flash.cfg --scr tegra194-mb1-bct-scr-cbb-mini.cfg --pinmux tegra19x-mb1-pinmux-p2888-0000-a04-royaloak-dcm.cfg --pmc tegra19x-mb1-padvoltage-p2888-0000-a00-royaloak-dcm.cfg --pmic tegra194-mb1-bct-pmic-p2888-0001-a04-royaloak-dcm.cfg --brcommand tegra194-mb1-bct-reset-p2888-0000-p2822-0000.cfg --prod tegra19x-mb1-prod-p2888-0000-p2822-0000.cfg --gpioint tegra194-mb1-bct-gpioint-p2888-0000-p2822-0000.cfg --uphy tegra194-mb1-uphy-lane-p2888-0000-p2822-0000.cfg --device tegra19x-mb1-bct-device-sdmmc.cfg
[ 2.0277 ] MB1-BCT version: 0x1

[ 2.0280 ] Parsing config file :tegra19x-mb1-pinmux-p2888-0000-a04-royaloak-dcm.cfg
[ 2.0285 ] Added Platform Config 0 data with size :- 2144

[ 2.0296 ] Parsing config file :tegra194-mb1-bct-scr-cbb-mini.cfg
[ 2.0299 ] Added Platform Config 1 data with size :- 19640

[ 2.0448 ] Parsing config file :tegra19x-mb1-padvoltage-p2888-0000-a00-royaloak-dcm.cfg
[ 2.0454 ] Added Platform Config 2 data with size :- 24

[ 2.0457 ] Parsing config file :tegra194-mb1-bct-pmic-p2888-0001-a04-royaloak-dcm.cfg
[ 2.0462 ] Added Platform Config 4 data with size :- 348

[ 2.0465 ] Parsing config file :tegra194-mb1-bct-reset-p2888-0000-p2822-0000.cfg
[ 2.0469 ] Added Platform Config 3 data with size :- 92
[ 2.0469 ]
[ 2.0469 ] Parsing config file :tegra19x-mb1-prod-p2888-0000-p2822-0000.cfg
[ 2.0469 ] Added Platform Config 5 data with size :- 56
[ 2.0469 ]
[ 2.0469 ] Parsing config file :tegra194-mb1-bct-gpioint-p2888-0000-p2822-0000.cfg
[ 2.0469 ] Added Platform Config 7 data with size :- 392
[ 2.0469 ]
[ 2.0469 ] Parsing config file :tegra194-mb1-uphy-lane-p2888-0000-p2822-0000.cfg
[ 2.0469 ] Added Platform Config 8 data with size :- 12
[ 2.0469 ]
[ 2.0469 ] Parsing config file :tegra19x-mb1-bct-device-sdmmc.cfg
[ 2.0470 ] Added Platform Config 9 data with size :- 32
[ 2.0470 ]
[ 2.0470 ] Updating mb1-bct with firmware information
[ 2.0480 ] tegrabct_v2 --chip 0x19 --mb1bct mb1_bct_MB1.bct --updatefwinfo flash.xml.bin
[ 2.0487 ] MB1-BCT version: 0x1
[ 2.0497 ]
[ 2.0498 ] Updating mb1-bct with storage information
[ 2.0510 ] tegrabct_v2 --chip 0x19 --mb1bct mb1_bct_MB1.bct --updatestorageinfo flash.xml.bin
[ 2.0518 ] MB1-BCT version: 0x1
[ 2.0522 ]
[ 2.0530 ] tegrahost_v2 --chip 0x19 --align mb1_bct_MB1.bct
[ 2.0538 ]
[ 2.0547 ] tegrahost_v2 --chip 0x19 0 --magicid MBCT --appendsigheader mb1_bct_MB1.bct zerosbk
[ 2.0554 ] adding BCH for mb1_bct_MB1.bct
[ 2.0562 ]
[ 2.0572 ] tegrasign_v2 --key None --list mb1_bct_MB1_sigheader.bct_list.xml --pubkeyhash pub_key.key
[ 2.0578 ] Assuming zero filled SBK key
[ 2.0581 ]
[ 2.0591 ] tegrahost_v2 --chip 0x19 0 --updatesigheader mb1_bct_MB1_sigheader.bct.encrypt mb1_bct_MB1_sigheader.bct.hash zerosbk
[ 2.0603 ]
[ 2.0604 ] Generating coldboot mem-bct
[ 2.0611 ] tegrabct_v2 --chip 0x19 0 --sdram /home/royaloak/royaloak_bsp/rootfs/build/tmp/deploy/images/dcm/temp/831/tmp6uq_cfud1.cfg --membct /home/royaloak/royaloak_bsp/rootfs/build/tmp/deploy/images/dcm/temp/831/tmp6uq_cfud1_1.bct /home/royaloak/royaloak_bsp/rootfs/build/tmp/deploy/images/dcm/temp/831/tmp6uq_cfud1_2.bct /home/royaloak/royaloak_bsp/rootfs/build/tmp/deploy/images/dcm/temp/831/tmp6uq_cfud1_3.bct /home/royaloak/royaloak_bsp/rootfs/build/tmp/deploy/images/dcm/temp/831/tmp6uq_cfud1_4.bct
[ 2.0618 ] Packing sdram param for instance[0]
[ 2.1091 ] Packing sdram param for instance[1]
[ 2.1094 ] Packing sdram param for instance[2]
[ 2.1096 ] Packing sdram param for instance[3]
[ 2.1096 ] Packing sdram param for instance[4]
[ 2.1096 ] Packing sdram param for instance[5]
[ 2.1096 ] Packing sdram param for instance[6]
[ 2.1096 ] Packing sdram param for instance[7]
[ 2.1096 ] Packing sdram param for instance[8]
[ 2.1096 ] Packing sdram param for instance[9]
[ 2.1096 ] Packing sdram param for instance[10]
[ 2.1096 ] Packing sdram param for instance[11]
[ 2.1096 ] Packing sdram param for instance[12]
[ 2.1096 ] Packing sdram param for instance[13]
[ 2.1096 ] Packing sdram param for instance[14]
[ 2.1097 ] Packing sdram param for instance[15]
[ 2.1097 ]
[ 2.1097 ] Getting sector size from pt
[ 2.1105 ] tegraparser_v2 --getsectorsize flash.xml.bin sector_info.bin
[ 2.1112 ]
[ 2.1112 ] BlockSize read from layout is 200

[ 2.1119 ] tegrahost_v2 --chip 0x19 0 --blocksize 512 --magicid MEMB --addsigheader_multi /home/royaloak/royaloak_bsp/rootfs/build/tmp/deploy/images/dcm/temp/831/tmp6uq_cfud1_1.bct /home/royaloak/royaloak_bsp/rootfs/build/tmp/deploy/images/dcm/temp/831/tmp6uq_cfud1_2.bct /home/royaloak/royaloak_bsp/rootfs/build/tmp/deploy/images/dcm/temp/831/tmp6uq_cfud1_3.bct /home/royaloak/royaloak_bsp/rootfs/build/tmp/deploy/images/dcm/temp/831/tmp6uq_cfud1_4.bct
[ 2.1125 ] adding BCH for /home/royaloak/royaloak_bsp/rootfs/build/tmp/deploy/images/dcm/temp/831/tmp6uq_cfud1_1.bct
[ 2.1146 ]
[ 2.1153 ] tegrahost_v2 --chip 0x19 --align mem_coldboot.bct
[ 2.1159 ]
[ 2.1165 ] tegrahost_v2 --chip 0x19 0 --magicid MEMB --appendsigheader mem_coldboot.bct zerosbk
[ 2.1171 ] Header already present for mem_coldboot.bct
[ 2.1174 ]
[ 2.1182 ] tegrasign_v2 --key None --list mem_coldboot_sigheader.bct_list.xml --pubkeyhash pub_key.key
[ 2.1189 ] Assuming zero filled SBK key
[ 2.1193 ]
[ 2.1204 ] tegrahost_v2 --chip 0x19 0 --updatesigheader mem_coldboot_sigheader.bct.encrypt mem_coldboot_sigheader.bct.hash zerosbk
[ 2.1215 ]
[ 2.1216 ] Generating recovery mem-bct
[ 2.1227 ] tegrabct_v2 --chip 0x19 0 --sdram /home/royaloak/royaloak_bsp/rootfs/build/tmp/deploy/images/dcm/temp/831/tmp6uq_cfud1.cfg --membct /home/royaloak/royaloak_bsp/rootfs/build/tmp/deploy/images/dcm/temp/831/tmp6uq_cfud1_1.bct /home/royaloak/royaloak_bsp/rootfs/build/tmp/deploy/images/dcm/temp/831/tmp6uq_cfud1_2.bct /home/royaloak/royaloak_bsp/rootfs/build/tmp/deploy/images/dcm/temp/831/tmp6uq_cfud1_3.bct /home/royaloak/royaloak_bsp/rootfs/build/tmp/deploy/images/dcm/temp/831/tmp6uq_cfud1_4.bct
[ 2.1245 ] Packing sdram param for instance[0]
[ 2.1727 ] Packing sdram param for instance[1]
[ 2.1729 ] Packing sdram param for instance[2]
[ 2.1732 ] Packing sdram param for instance[3]
[ 2.1732 ] Packing sdram param for instance[4]
[ 2.1732 ] Packing sdram param for instance[5]
[ 2.1732 ] Packing sdram param for instance[6]
[ 2.1732 ] Packing sdram param for instance[7]
[ 2.1732 ] Packing sdram param for instance[8]
[ 2.1732 ] Packing sdram param for instance[9]
[ 2.1732 ] Packing sdram param for instance[10]
[ 2.1732 ] Packing sdram param for instance[11]
[ 2.1732 ] Packing sdram param for instance[12]
[ 2.1732 ] Packing sdram param for instance[13]
[ 2.1732 ] Packing sdram param for instance[14]
[ 2.1733 ] Packing sdram param for instance[15]
[ 2.1733 ]
[ 2.1742 ] tegrahost_v2 --chip 0x19 --align mem_rcm.bct
[ 2.1749 ]
[ 2.1756 ] tegrahost_v2 --chip 0x19 0 --magicid MEMB --appendsigheader mem_rcm.bct zerosbk
[ 2.1761 ] adding BCH for mem_rcm.bct
[ 2.1772 ]
[ 2.1780 ] tegrasign_v2 --key None --list mem_rcm_sigheader.bct_list.xml --pubkeyhash pub_key.key
[ 2.1785 ] Assuming zero filled SBK key
[ 2.1788 ]
[ 2.1796 ] tegrahost_v2 --chip 0x19 0 --updatesigheader mem_rcm_sigheader.bct.encrypt mem_rcm_sigheader.bct.hash zerosbk
[ 2.1808 ]
[ 2.1809 ] Copying signatures
[ 2.1815 ] tegrahost_v2 --chip 0x19 0 --partitionlayout flash.xml.bin --updatesig images_list_signed.xml
[ 3.1162 ]
[ 3.1162 ] Boot Rom communication
[ 3.1173 ] tegrarcm_v2 --chip 0x19 0 --rcm rcm_list_signed.xml
[ 3.1183 ] BootRom is not running
[ 8.4126 ]
[ 9.4173 ] tegrarcm_v2 --isapplet