# USB camera working problem

**URL:** <https://forums.developer.nvidia.com/t/usb-camera-working-problem/139475>\
**Category:** Jetson TX2\
**Tags:** usb\
**Created:** [June 29, 2020, 1:57am UTC](https://forums.developer.nvidia.com/t/usb-camera-working-problem/139475 "2020-06-29T01:57:55Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![DaneLLL](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/danelll/32/14043_2.png) [@DaneLLL](https://forums.developer.nvidia.com/u/DaneLLL)\
**Post date:** [June 29, 2020, 7:26am UTC](https://forums.developer.nvidia.com/t/usb-camera-working-problem/139475/3 "2020-06-29T07:26:57Z")

</div>

Hi,  
We have tried Logitech C930,E-Con See3CAM CU135 and don’t observe the issue. Probably it is specfic to the camera. Please try to disable and re-enable regulator after booting to kernel:

> [@USB Power Control](https://forums.developer.nvidia.com/t/usb-power-control/65838):
>
> I am trying to control the USB\_VBUS\_EN1 pin to switch the USB1 VBUS Power on and off. The main problem we have is that a ZED-Mini camera will not work on boot up and requires to actually disconnect and re connect the USB cable (Issue [https://github.com/stereolabs/zed-ros-wrapper/issues/249](https://github.com/stereolabs/zed-ros-wrapper/issues/249)), the issue itself seems to be a long time to fix so in the mean time we are trying to find a good workaround. I checked this topic [https://devtalk.nvidia.com/default/topic/1030488/jetson-tx1/usb-power-contr…](https://devtalk.nvidia.com/default/topic/1030488/jetson-tx1/usb-power-control/)

It should trigger re-enumeration of USB devices.

---

_[View the full topic](https://forums.developer.nvidia.com/t/usb-camera-working-problem/139475)._
