# USB Hub Issue - Hub not present, no power to devices **URL:** \ **Category:** Jetson Nano\ **Tags:** usb\ **Created:** [March 25, 2021, 12:42am UTC](https://forums.developer.nvidia.com/t/usb-hub-issue-hub-not-present-no-power-to-devices/173271 "2021-03-25T00:42:36Z")\ **Posts on this page:** 5\ **Page:** 1
**Author:** ![Luke\_B](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@Luke\_B](https://forums.developer.nvidia.com/u/Luke_B)\ **Post date:** [March 25, 2021, 12:42am UTC](https://forums.developer.nvidia.com/t/usb-hub-issue-hub-not-present-no-power-to-devices/173271/1 "2021-03-25T00:42:36Z")
I have a Jetson Nano which was working fine but now there is no power available on the USB ports. The issue occurred when using a Balena image, but persists with a standard Jetpack image. The dmesg below is from the Jetpack image: ``` [0.000000] Booting Linux on physical CPU 0x0 [0.000000] Linux version 4.9.140-tegra (buildbrain@mobile-u64-3456) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Thu Jun 25 21:25:44 PDT 2020 [0.000000] Boot CPU: AArch64 Processor [411fd071] [0.000000] OF: fdt:memory scan node memory@80000000, reg size 48, [0.000000] OF: fdt: - 80000000 , 7ee00000 [0.000000] OF: fdt: - 100000000 , 7f200000 [0.000000] Found tegra_fbmem: 00140000@92cb4000 [0.000000] earlycon: uart8250 at MMIO32 0x0000000070006000 (options '') [0.000000] bootconsole [uart8250] enabled [0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [0.000000] OF: reserved mem: initialized node iram-carveout, compatible id nvidia,iram-carveout [0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [0.000000] cma: Reserved 64 MiB at 0x00000000fac00000 [0.000000] On node 0 totalpages: 1039872 [0.000000] DMA zone: 8192 pages used for memmap [0.000000] DMA zone: 0 pages reserved [0.000000] DMA zone: 519168 pages, LIFO batch:31 [0.000000] Normal zone: 8136 pages used for memmap [0.000000] Normal zone: 520704 pages, LIFO batch:31 [0.000000] psci: probing for conduit method from DT. [0.000000] psci: PSCIv1.0 detected in firmware. [0.000000] psci: Using standard PSCI v0.2 function IDs [0.000000] psci: MIGRATE_INFO_TYPE not supported. [0.000000] psci: SMC Calling Convention v1.1 [0.000000] percpu: Embedded 25 pages/cpu @ffffffc0fefb3000 s61656 r8192 d32552 u102400 [0.000000] pcpu-alloc: s61656 r8192 d32552 u102400 alloc=25*4096 [0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0.000000] CPU features: enabling workaround for ARM erratum 832075 [0.000000] Speculative Store Bypass Disable mitigation not required [0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1023544 [0.000000] Kernel command line: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,2 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff780000 core_edp_mv=1125 core_edp_ma=4000 tegra_fbmem=0x140000@0x92cb4000 is_hdmi_initialised=1 earlycon=uart8250,mmio32,0x70006000 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [0.000000] log_buf_len individual max cpu contribution: 32768 bytes [0.000000] log_buf_len total cpu_extra contributions: 98304 bytes [0.000000] log_buf_len min size: 32768 bytes [0.000000] log_buf_len: 131072 bytes [0.000000] early log buf free: 29232(89%) [0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [0.000000] Memory: 3569008K/4159488K available (15294K kernel code, 2934K rwdata, 6640K rodata, 8576K init, 609K bss, 115344K reserved, 475136K cma-reserved) [0.000000] Virtual kernel memory layout: [0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [0.000000] .text : 0xffffff8008080000 - 0xffffff8008f70000 ( 15296 KB) [0.000000] .rodata : 0xffffff8008f70000 - 0xffffff8009600000 ( 6720 KB) [0.000000] .init : 0xffffff8009600000 - 0xffffff8009e60000 ( 8576 KB) [0.000000] .data : 0xffffff8009e60000 - 0xffffff800a13d808 ( 2935 KB) [0.000000] .bss : 0xffffff800a13d808 - 0xffffff800a1d5f7c ( 610 KB) [0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [0.000000] 0xffffffbf00000000 - 0xffffffbf03fc8000 ( 63 MB actual) [0.000000] memory : 0xffffffc000000000 - 0xffffffc0ff200000 ( 4082 MB) [0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [0.000000] Preemptible hierarchical RCU implementation. [0.000000] Build-time adjustment of leaf fanout to 64. [0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [0.000000] NR_IRQS:64 nr_irqs:64 0 [0.000000] /interrupt-controller@60004000: 192 interrupts forwarded to /interrupt-controller [0.000000] t210 clock and reset probe [0.000000] tegra-pmc: get_secure_pmc_setting: done secure_pmc=1 [0.000000] clk_cbus_recalc_rate: no gbus parent [0.000000] clk_cbus_recalc_rate: no gbus parent [0.000000] clk_cbus_recalc_rate: no gbus parent [0.000000] clk_cbus_recalc_rate: no gbus parent [0.000000] clk_cbus_recalc_rate: no gbus parent [0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys). [0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [0.001693] Console: colour dummy device 80x25 [0.001703] console [tty0] enabled [0.001709] bootconsole [uart8250] disabled [0.001727] kmemleak: Kernel memory leak detector disabled [0.001745] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800) [0.001758] pid_max: default: 32768 minimum: 301 [0.002212] Security Framework initialized [0.002433] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [0.002442] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [0.003554] ftrace: allocating 47104 entries in 185 pages [0.171366] sched-energy: CPU device node has no sched-energy-costs [0.171399] ASID allocator initialised with 65536 entries [0.207755] tegra-id: chipid=22117. [0.207768] tegra-id: opt_subrevision=0. [0.207786] Tegra Speedo/IDDQ fuse revision 4 [0.207791] Tegra: CPU Speedo ID 9, SoC Speedo ID 0, GPU Speedo ID 2 [0.207795] Tegra: CPU Process ID 0, SoC Process ID 0, GPU Process ID 0 [0.207802] Tegra: CPU Speedo Value 2015, SoC Speedo Value 1905, GPU Speedo Value 2020 [0.207807] Tegra: CPU IDDQ Value 1760, SoC IDDQ Value 2084, GPU IDDQ Value 2400 [0.207827] Tegra Revision: A02 SKU: 0x8f CPU Process: 0 SoC Process: 0 [0.207843] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0000-p3449-0000-b00.dts [0.207850] DTB Build time: Jun 25 2020 21:31:08 [0.257063] CPU1: Booted secondary processor [411fd071] [0.288962] CPU2: Booted secondary processor [411fd071] [0.320953] CPU3: Booted secondary processor [411fd071] [0.321036] Brought up 4 CPUs [0.321043] SMP: Total of 4 processors activated. [0.321049] CPU features: detected feature: 32-bit EL0 Support [0.321311] CPU: All CPU(s) started at EL2 [0.321328] alternatives: patching kernel code [0.329426] devtmpfs: initialized [0.367001] Initilizing CustomIPI irq domain [0.367391] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [0.367412] futex hash table entries: 1024 (order: 4, 65536 bytes) [0.378063] pinctrl core: initialized pinctrl subsystem [0.378710] OS set in device tree is not L4T. [0.379114] regulator-dummy: no parameters [0.379419] Initializing plugin-manager [0.379525] Plugin module not found [0.379760] node /plugin-manager/fragement@0 match with board >=3448-0000-100 [0.380316] node /plugin-manager/fragment@1 match with board >=3448-0000-101 [0.381443] node /plugin-manager/fragement@6 match with odm-data enable-tegra-wdt [0.381927] node /plugin-manager/fragement@8 match with odm-data enable-tegra-wdt [0.382572] node /plugin-manager/fragement@10 match with board >=3448-0000-300 [0.384636] node /plugin-manager/fragement@11 match with board >=3448-0000-300 [0.388107] NET: Registered protocol family 16 [0.389442] persistent_ram: found existing invalid buffer, size 0, start 805306368 [0.389507] pstore: using zlib compression [0.389550] console [pstore-1] enabled [0.389554] pstore: Registered ramoops as persistent store backend [0.389559] ramoops: attached 0x200000@0xb0000000, ecc: 0/0 [0.405081] cpuidle: using governor menu [0.409234] tegra_smmu 70019000.iommu: Loaded Tegra IOMMU driver [0.411091] vdso: 2 pages (1 code @ ffffff8008f77000, 1 data @ ffffff8009e64000) [0.411115] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [0.413557] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [0.415898] Serial: AMBA PL011 UART driver [0.416405] tegra_powergate_init: DONE [0.416421] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0000-p3449-0000-b00.dts [0.416429] DTB Build time: Jun 25 2020 21:31:08 [0.418380] Tegra reboot handler registered. [0.422939] iommu: Adding device tegra-carveouts to group 0 [0.423080] platform tegra-carveouts: domain=ffffffc0f9bbf3d8 allocates as[0]=ffffffc0f9bd40a8 [0.423431] iommu: Adding device smmu_test to group 1 [0.423479] platform smmu_test: domain=ffffffc0f9bbf618 allocates as[0]=ffffffc0f9bd4110 [0.424265] mc: mapped MMIO address: 0xffffff800802e000 -> 0x70019000 [0.424318] mc: mapped MMIO address: 0xffffff8008065000 -> 0x7001c000 [0.424375] mc: mapped MMIO address: 0xffffff8008079000 -> 0x7001d000 [0.424384] nv-tegra-mc 70019000.mc: No mssnvlink node [0.424408] mc-err: mcerr ops are set to t21x [0.434126] iommu: Adding device 70090000.xusb to group 2 [0.434399] iommu: Adding device 70006000.serial to group 3 [0.434468] platform 70006000.serial: domain=ffffffc0f94c6618 allocates as[0]=ffffffc0f9bd4178 [0.434888] iommu: Adding device 70006040.serial to group 4 [0.435159] iommu: Adding device 70006200.serial to group 5 [0.435388] iommu: Adding device sound to group 6 [0.435431] platform sound: domain=ffffffc0f94c6b58 allocates as[0]=ffffffc0f9bd41e0 [0.435973] iommu: Adding device 7000d400.spi to group 7 [0.436234] iommu: Adding device 7000d600.spi to group 8 [0.436510] iommu: Adding device 70410000.spi to group 9 [0.436810] iommu: Adding device 50000000.host1x to group 10 [0.437283] iommu: Adding device 54080000.vi to group 11 [0.437679] iommu: Adding device 54600000.isp to group 12 [0.437937] iommu: Adding device 54680000.isp to group 13 [0.438236] iommu: Adding device tegradc.0 to group 14 [0.438291] platform tegradc.0: domain=ffffffc0f94d3a98 allocates as[0]=ffffffc0f9bd4248 [0.439674] platform tegradc.0: IOVA linear map 0x0000000092cb4000(140000) [0.440065] platform tegradc.0: IOVA linear map 0x00000000d7000000(19000000) [0.440382] iommu: Adding device tegradc.1 to group 15 [0.440428] platform tegradc.1: domain=ffffffc0f94d3cd8 allocates as[0]=ffffffc0f9bd42b0 [0.441840] platform tegradc.1: IOVA linear map 0x0000000092cb4000(140000) [0.442229] platform tegradc.1: IOVA linear map 0x00000000d7000000(19000000) [0.442486] iommu: Adding device 54340000.vic to group 16 [0.442687] iommu: Adding device 544c0000.nvenc to group 17 [0.442875] iommu: Adding device 54500000.tsec to group 18 [0.443071] iommu: Adding device 54100000.tsecb to group 19 [0.443280] iommu: Adding device 54480000.nvdec to group 20 [0.443496] iommu: Adding device 54380000.nvjpg to group 21 [0.444524] iommu: Adding device 546c0000.i2c to group 22 [0.444863] iommu: Adding device 57000000.gpu to group 23 [0.444916] platform 57000000.gpu: domain=ffffffc0f94e0cd8 allocates as[0]=ffffffc0f9bd4318 [0.444953] platform 57000000.gpu: domain=ffffffc0f94e0cd8 allocates as[1]=ffffffc0f9bd4380 [0.445024] platform 57000000.gpu: domain=ffffffc0f94e0cd8 allocates as[2]=ffffffc0f9bd43e8 [0.445063] platform 57000000.gpu: domain=ffffffc0f94e0cd8 allocates as[3]=ffffffc0f9bd4450 [0.445952] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [0.445962] tegra-pmc 7000e400.pmc: scratch reg offset dts data not present [0.445973] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET [0.445978] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_WARM [0.445982] tegra-pmc: ### PMC reset status reg: 0x0 [0.497140] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [0.497149] tegra-pmc: Clear bootloader IO dpd settings [0.497171] tegra-pmc 7000e400.pmc: IO padctrl driver initialized [0.497240] tegra-pmc 7000e400.pmc: PMC: Successfully configure bootrom reset commands [0.497536] iommu: Adding device 70012000.se to group 24 [0.498392] iommu: Adding device 7000c000.i2c to group 25 [0.498657] iommu: Adding device 7000c400.i2c to group 26 [0.498964] iommu: Adding device 7000c500.i2c to group 27 [0.499258] iommu: Adding device 7000c700.i2c to group 28 [0.499602] iommu: Adding device 7000d000.i2c to group 29 [0.499899] iommu: Adding device 7000d100.i2c to group 30 [0.500232] iommu: Adding device sdhci-tegra.0 to group 31 [0.500291] platform sdhci-tegra.0: domain=ffffffc0f957fe58 allocates as[0]=ffffffc0f9bd44b8 [0.501180] iommu: Adding device 700d0000.xudc to group 32 [0.505244] vdd-ac-bat: 5000 mV [0.505586] vdd-5v0-sys: 5000 mV [0.506743] vdd-5v0-hdmi: supplied by vdd-5v0-sys [0.506808] vdd-5v0-hdmi: 5000 mV [0.507302] vdd-1v8-sys: 1800 mV [0.507745] vdd-fan: supplied by vdd-5v0-sys [0.507778] vdd-fan: 5000 mV [0.508162] vdd-usb-vbus: supplied by vdd-5v0-sys [0.508220] vdd-usb-vbus: 5000 mV [0.508760] vdd-usb-vbus2: 5000 mV [0.541985] HugeTLB registered 2 MB page size, pre-allocated 0 pages [0.544381] gpio gpiochip0: gpio-line-names specifies 240 line names but there are 256 lines on the chip [0.545522] GPIO line 151 (camera-control-output-low) hogged as output/low [0.545542] GPIO line 152 (camera-control-output-low) hogged as output/low [0.545574] GPIO line 6 (system-suspend-gpio) hogged as output/high [0.545905] gpiochip_setup_dev: registered GPIOs 0 to 255 on device: gpiochip0 (tegra-gpio) [0.553688] eventlib_kernel: keventlib is initialized, test id: 0 [0.554012] SCSI subsystem initialized [0.554248] libata version 3.00 loaded. [0.554523] usbcore: registered new interface driver usbfs [0.554575] usbcore: registered new interface driver hub [0.554650] usbcore: registered new device driver usb [0.558545] max77620 4-003c: PMIC Version OTP:0x35 and ES:0x8 [0.565190] vdd-core: 600 <--> 1162 mV at 1125 mV [0.565858] random: fast init done [0.566213] vdd-ddr-1v1: Bringing 1125000uV into 1150000-1150000uV [0.569073] vdd-ddr-1v1: 1150 mV [0.572986] vdd-pre-reg-1v35: 1350 mV [0.576978] vdd-1v8: 1800 mV [0.580971] avdd-sys-1v2: 1200 mV [0.584977] vdd-pex-1v0: 1050 mV [0.585600] vddio-sdmmc-ap: 1800 <--> 3300 mV at 3300 mV [0.586173] max77620-ldo3: at 3100 mV [0.588977] vdd-rtc: 850 <--> 1100 mV at 1000 mV [0.589528] max77620-ldo5: at 3100 mV [0.592978] vddio-sdmmc3-ap: 1800 <--> 3300 mV at 2800 mV [0.596970] avdd-1v05-pll: 1050 mV [0.600974] avdd-io-hdmi-dp: 1050 mV [0.603625] GPIO line 505 (spmic-default-output-high) hogged as output/high [0.603905] gpiochip_setup_dev: registered GPIOs 504 to 511 on device: gpiochip1 (max77620-gpio) [0.604198] max77620 4-003c: max77620 probe successful [0.606859] media: Linux media interface: v0.10 [0.606914] Linux video capture interface: v2.00 [0.607770] pps_core: LinuxPPS API ver. 1 registered [0.607775] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [0.607791] PTP clock support registered [0.611041] tegra210-emc 7001b000.external-memory-controller: validated EMC DFS table [0.611863] Advanced Linux Sound Architecture Driver Initialized. [0.612472] Bluetooth: Core ver 2.22 [0.612519] NET: Registered protocol family 31 [0.612523] Bluetooth: HCI device and connection manager initialized [0.612536] Bluetooth: HCI socket layer initialized [0.612545] Bluetooth: L2CAP socket layer initialized [0.612571] Bluetooth: SCO socket layer initialized [0.614398] tegra210_dvfs: no clock found for sdmmc2_ddr [0.614416] tegra210_dvfs: no clock found for sdmmc4_ddr [0.614470] tegra210_dvfs: no clock found for sdmmc1_ddr [0.614486] tegra210_dvfs: no clock found for sdmmc3_ddr [0.618085] tegra_dvfs: Unable to get vdd-cpu rail for step info, defering probe [0.619251] vdd-3v3-sys: supplied by vdd-5v0-sys [0.619310] vdd-3v3-sys: 3300 mV [0.619574] vdd-1v8-sys: supplied by vdd-3v3-sys [0.621156] vdd-usb-vbus2: supplied by vdd-3v3-sys [0.621658] vdd-3v3-sd: supplied by vdd-3v3-sys [0.621698] vdd-3v3-sd: 3300 mV [0.622756] avdd-io-edp-1v05: supplied by avdd-1v05-pll [0.622795] avdd-io-edp-1v05: 1050 mV [0.623198] vdd-usb-hub-en: supplied by vdd-1v8-sys [0.623261] vdd-usb-hub-en: 5000 mV [0.624531] camchar: rtcpu character device driver loaded [0.625296] extcon-gpio-states extcon:extcon@1: Cable state:1, cable id:1 [0.626696] clocksource: Switched to clocksource arch_sys_counter [0.667402] VFS: Disk quotas dquot_6.6.0 [0.667528] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [0.667983] nvmap_heap_init: nvmap_heap_init: created heap block cache [0.668378] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000d7000000, size=0x19000000 [0.668397] dma-vpr: heap size is not multiple of cma_chunk_size heap_info->num_chunks (13) rem_chunk_size(0x1000000) [0.668639] cma: enabled page replacement for spfn=d7000, epfn=f0000 [0.668648] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [0.668662] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [0.668699] tegra-carveouts tegra-carveouts: iram :dma coherent mem declare 0x0000000040001000,258048 [0.668705] tegra-carveouts tegra-carveouts: assigned reserved memory node iram-carveout [0.668718] nvmap: nvmap_select_cache_ops() nvmap cache ops set to set/ways [0.668727] nvmap_page_pool_init: Total RAM pages: 1011036 [0.668732] nvmap_page_pool_init: nvmap page pool size: 126379 pages (493 MB) [0.668817] nvmap_background_zero_thread: PP zeroing thread starting. [0.669233] misc nvmap: created heap iram base 0x0000000040001000 size (252KiB) [0.669967] misc nvmap: created heap vpr base 0x00000000d7000000 size (409600KiB) [0.679493] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type AO-therm [0.679882] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type CPU-therm [0.680135] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [0.680343] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [0.680511] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [0.680792] pre_t19x_iso_plat_init(): iso emc max clk=1600000KHz [0.680796] pre_t19x_iso_plat_init(): max_iso_bw=11520000KB [0.681224] NET: Registered protocol family 2 [0.682246] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [0.682457] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [0.682995] TCP: Hash tables configured (established 32768 bind 32768) [0.683150] UDP hash table entries: 2048 (order: 4, 65536 bytes) [0.683229] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [0.683652] NET: Registered protocol family 1 [0.684340] RPC: Registered named UNIX socket transport module. [0.684345] RPC: Registered udp transport module. [0.684349] RPC: Registered tcp transport module. [0.684352] RPC: Registered tcp NFSv4.1 backchannel transport module. [0.684365] PCI: CLS 0 bytes, default 64 [0.684599] Trying to unpack rootfs image as initramfs... [0.914336] Freeing initrd memory: 5356K [0.924070] host1x 50000000.host1x: initialized [0.925865] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [0.929047] audit: initializing netlink subsys (disabled) [0.929137] audit: type=2000 audit(0.779:1): initialized [0.929890] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [0.939771] squashfs: version 4.0 (2009/01/31) Phillip Lougher [0.941224] ntfs: driver 2.1.32 [Flags: R/W]. [0.942004] 9p: Installing v9fs 9p2000 file system support [0.945323] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [0.945469] io scheduler noop registered [0.945753] io scheduler cfq registered (default) [0.948403] gic 702f9000.agic: GIC IRQ controller registered [0.951457] iommu: Adding device 702ef000.adsp to group 33 [0.960180] iommu: Adding device aconnect@702c0000:adsp_audio to group 34 [0.960328] tegra-aconnect aconnect@702c0000: Tegra ACONNECT bus registered [0.960903] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_SKU_CALIB_0 = 0x8288c13 [0.960912] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_USB_CALIB_EXT_0 = 0x4 [0.962551] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.0, lane = usb2-0, function = xusb [0.962665] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.1, lane = usb2-1, function = xusb [0.962802] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.2, lane = usb2-2, function = xusb [0.963014] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.3, lane = pcie-0, function = pcie-x1 [0.963111] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.4, lane = pcie-1, function = pcie-x4 [0.963199] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.5, lane = pcie-2, function = pcie-x4 [0.963287] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.6, lane = pcie-3, function = pcie-x4 [0.963369] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.7, lane = pcie-4, function = pcie-x4 [0.963456] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.8, lane = pcie-5, function = xusb [0.963538] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.9, lane = pcie-6, function = xusb [0.969890] tegra-pwm 7000a000.pwm: PWM clk cannot sleep in ops [0.971625] tegra-dfll-pwm 70110000.pwm: DFLL pwm-rate: 12800000 [0.973484] tegra-pcie 1003000.pcie: 4x1, 1x1 configuration [0.974790] tegra-pcie 1003000.pcie: PCIE: Enable power rails [0.975152] tegra-pcie 1003000.pcie: probing port 0, using 4 lanes [0.976312] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [0.976531] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [0.976761] Adding domain tsec-pd to PM domain host1x-pd [0.978977] tegra-pcie 1003000.pcie: probing port 1, using 1 lanes [0.979875] tsec 54500000.tsec: initialized [0.981421] tsec 54100000.tsecb: initialized [0.982106] Adding domain nvdec-pd to PM domain host1x-pd [0.985564] nvdec 54480000.nvdec: initialized [0.986618] Adding domain vic03-pd to PM domain host1x-pd [0.986857] Adding domain msenc-pd to PM domain host1x-pd [0.987025] Adding domain nvjpg-pd to PM domain host1x-pd [0.991030] falcon 54340000.vic: initialized [0.992303] falcon 544c0000.nvenc: initialized [0.993615] falcon 54380000.nvjpg: initialized [0.997850] tegra_cec 70015000.tegra_cec: dt=1 start=0x70015000 end=0x70015FFF irq=97 [0.997893] tegra_cec 70015000.tegra_cec: Enable clock result: 0. [0.997928] tegra_cec 70015000.tegra_cec: tegra_cec_init started [0.998014] tegradc tegradc.0: disp0 connected to head0->/host1x/sor1 [0.998136] display board info: id 0x0, fab 0x0 [0.998206] generic_infoframe_type: 0x87 [0.998210] tegra_cec 70015000.tegra_cec: cec_add_sysfs ret=0 [0.998215] tegra_cec 70015000.tegra_cec: probed [0.998370] tegradc tegradc.0: DT parsed successfully [0.998413] tegradc tegradc.0: Display dc.ffffff800ab80000 registered with id=0 [0.998994] tegradc tegradc.0: Bootloader disp_param detected. Detected mode: 640x480 (on 0x0mm) pclk=25173906 [1.002186] tegradc tegradc.0: probed [1.007245] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [1.013828] tegra-adma 702e2000.adma: Tegra210 ADMA driver registered 22 channels [1.014774] tegra-fuse-burn 7000f800.efuse:efuse-burn: shutdown limit check disabled [1.014787] tegra-fuse-burn 7000f800.efuse:efuse-burn: Fuse burn driver initialized [1.015143] kfuse 7000fc00.kfuse: initialized [1.016583] tegra-pmc-iopower pmc-iopower: Regulator supply iopower-dbg-supply not available [1.017511] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [1.018972] tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00 [1.018998] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [1.019006] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] [1.019015] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref] [1.019022] pci_bus 0000:00: root bus resource [bus 00-ff] [1.019118] pci 0000:00:01.0: [10de:0fae] type 01 class 0x060400 [1.019286] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold [1.019638] pci 0000:00:02.0: [10de:0faf] type 01 class 0x060400 [1.019736] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [1.020029] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [1.020044] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [1.020254] pci 0000:01:00.0: [8086:24fd] type 00 class 0x028000 [1.020318] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit] [1.020738] tegra-dfll-pwm 70110000.pwm: DFLL_PWM regulator is available now [1.020753] vdd-cpu: 708 <--> 1322 mV at 708 mV [1.020788] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [1.021269] pwm-regulator pwm_regulators:pwm-regulator@0: PWM regulator registration passed [1.022855] vdd-gpu: applied init 1000000uV constraint [1.022865] vdd-gpu: 708 <--> 1323 mV at 997 mV [1.023365] pwm-regulator pwm_regulators:pwm-regulator@1: PWM regulator registration passed [1.027627] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [1.027730] No Device Node present for smmu client: serial8250 !! [1.027739] platform serial8250: No iommus property found in DT node, got swgids from fixup(101004000) [1.027779] iommu: Adding device serial8250 to group 35 [1.029775] Console: switching to colour frame buffer device 80x30 [1.029815] tegradc tegradc.0: fb registered [1.030463] console [ttyS0] disabled [1.030544] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 63, base_baud = 25500000) is a Tegra [1.030653] console [ttyS0] enabled [1.030889] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [1.031104] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [1.031138] pci 0000:02:00.0: reg 0x10: [io 0x0000-0x00ff] [1.031174] pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit] [1.031197] pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit] [1.031382] pci 0000:02:00.0: supports D1 D2 [1.031387] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [1.031858] 70006040.serial: ttyTHS1 at MMIO 0x70006040 (irq = 64, base_baud = 0) is a TEGRA_UART [1.032220] serial-tegra 70006200.serial: RX in PIO mode [1.032324] 70006200.serial: ttyTHS2 at MMIO 0x70006200 (irq = 65, base_baud = 0) is a TEGRA_UART [1.033447] [drm] Initialized [1.037990] tegradc tegradc.0: DC initialized, skipping tegra_dc_program_mode. [1.038037] tegradc tegradc.0: hdmi: tmds rate:25174K prod-setting:prod_c_hdmi_0m_54m [1.038542] tegradc tegradc.0: hdmi: get RGB quant from REG programmed by BL. [1.038555] tegradc tegradc.0: hdmi: BL set VIC 0 [1.038561] tegradc tegradc.0: hdmi: get YCC quant from REG programmed by BL. [1.039380] tegra-i2c 7000c700.i2c: no acknowledge from address 0x50 [1.039622] extcon-disp-state extcon:disp-state: cable 47 state 1 [1.039627] Extcon AUX1(HDMI) enable [1.040672] tegradc tegradc.1: disp1 connected to head1->/host1x/sor [1.040752] tegradc tegradc.1: No lt-data, using default setting [1.040782] tegradc tegradc.1: No hpd-gpio in DT [1.040814] tegradc tegradc.1: DT parsed successfully [1.040861] tegradc tegradc.1: Display dc.ffffff800d500000 registered with id=1 [1.042428] tegradc tegradc.1: dpd enable lookup fail:-19 [1.042873] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 [1.042959] pci 0000:00:01.0: BAR 14: assigned [mem 0x13000000-0x130fffff] [1.042967] pci 0000:00:02.0: BAR 14: assigned [mem 0x13100000-0x131fffff] [1.042972] pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x1fff] [1.042983] pci 0000:01:00.0: BAR 0: assigned [mem 0x13000000-0x13001fff 64bit] [1.043009] pci 0000:00:01.0: PCI bridge to [bus 01] [1.043019] pci 0000:00:01.0: bridge window [mem 0x13000000-0x130fffff] [1.043032] pci 0000:02:00.0: BAR 4: assigned [mem 0x13100000-0x13103fff 64bit] [1.043051] pci 0000:02:00.0: BAR 2: assigned [mem 0x13104000-0x13104fff 64bit] [1.043069] pci 0000:02:00.0: BAR 0: assigned [io 0x1000-0x10ff] [1.043077] pci 0000:00:02.0: PCI bridge to [bus 02] [1.043081] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] [1.043087] pci 0000:00:02.0: bridge window [mem 0x13100000-0x131fffff] [1.043586] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [1.043591] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [1.043598] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [1.043726] aer 0000:00:01.0:pcie002: service driver aer loaded [1.043937] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt [1.043940] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [1.043947] pcie_pme 0000:00:02.0:pcie001: service driver pcie_pme loaded [1.044041] aer 0000:00:02.0:pcie002: service driver aer loaded [1.046545] brd: module loaded [1.052456] edid invalid [1.055202] loop: module loaded [1.055320] tegra_profiler: version: 1.141, samples/io: 48/28 [1.058762] tegra_profiler: auth: init [1.060086] THERMAL EST: found 2 subdevs [1.060094] THERMAL EST num_resources: 0 [1.060100] [THERMAL EST subdev 0] [1.060108] [THERMAL EST subdev 1] [1.060556] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [1.060562] THERMAL EST: thz register success. [1.060720] THERMAL EST: end of probe, return err: 0 [1.061157] tegradc tegradc.1: probed [1.061896] sd: No Scsi addr parsed to reserve index [1.061931] hisi_sas: driver version v1.6 [1.066576] tegra-qspi 70410000.spi: Prod settings list not found [1.067684] qspi_mtd spi32766.0: MX25U3235F (4096 Kbytes) [1.067694] qspi_mtd spi32766.0: mtd .name = spi32766.0, .size = 0x400000 (4MiB) .erasesize = 0x00001000 (4KiB) .numeraseregions = 0 [1.074925] tegradc tegradc.1: fb registered [1.079783] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [1.079794] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [1.079806] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [1.079824] tegradc tegradc.1: blank - powerdown [1.079848] extcon-disp-state extcon:disp-state: cable 44 state 0 already set. [1.079854] Extcon DP: HPD disabled [1.079859] hpd: hpd_switch 0 [1.079863] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [1.079873] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [1.079879] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [1.081350] tegradc tegradc.0: nominal-pclk:25174825 parent:25173906 div:1.0 pclk:25173906 24923052~27440532 [1.081688] libphy: Fixed MDIO Bus: probed [1.082295] tun: Universal TUN/TAP device driver, 1.6 [1.082298] tun: (C) 1999-2004 Max Krasnyansky [1.083162] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [1.083165] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [1.083208] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [1.083211] igb: Copyright (c) 2007-2014 Intel Corporation. [1.083249] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [1.083252] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [1.083288] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4 [1.083291] Copyright(c) 1999 - 2017 Intel Corporation. [1.084025] r8168 0000:02:00.0: enabling device (0000 -> 0003) [1.084045] r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded [1.098555] r8168 0000:02:00.0 (unnamed net_device) (uninitialized): Invalid ethernet address 00:00:00:00:00:00, trying device tree node [1.098633] r8168 0000:02:00.0 (unnamed net_device) (uninitialized): Found valid ethernet address 00:04:4b:eb:01:12 from device tree [1.099190] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [1.099222] r8168 Copyright (C) 2017 Realtek NIC software team This program comes with ABSOLUTELY NO WARRANTY; for details, please see . This is free software, and you are welcome to redistribute it under certain conditions; see . [1.099612] PPP generic driver version 2.4.2 [1.099740] PPP BSD Compression module registered [1.099744] PPP Deflate Compression module registered [1.099759] PPP MPPE Compression module registered [1.099763] NET: Registered protocol family 24 [1.099814] usbcore: registered new interface driver r8152 [1.099851] usbcore: registered new interface driver asix [1.099900] usbcore: registered new interface driver ax88179_178a [1.099933] usbcore: registered new interface driver cdc_ether [1.099965] usbcore: registered new interface driver net1080 [1.099998] usbcore: registered new interface driver cdc_subset [1.100031] usbcore: registered new interface driver zaurus [1.100076] usbcore: registered new interface driver cdc_ncm [1.100201] VFIO - User Level meta-driver version: 0.3 [1.101153] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [1.101165] ehci-pci: EHCI PCI platform driver [1.101205] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [1.101212] ohci-pci: OHCI PCI platform driver [1.101249] ohci-platform: OHCI generic platform driver [1.103043] tegra-xusb 70090000.xusb: USB2 port 0 has OTG_CAP [1.103575] tegra-xusb-padctl 7009f000.xusb_padctl: enabled OTG on UTMI pad 0 [1.104611] tegra-xusb 70090000.xusb: extcon 0: ffffffc0f90dd000 id [1.105985] usbcore: registered new interface driver uas [1.106033] usbcore: registered new interface driver usb-storage [1.106109] usbcore: registered new interface driver usbserial [1.106724] tegra-xusb 70090000.xusb: Firmware timestamp: 2019-10-17 15:58:59 UTC, Version: 50.25 release [1.106751] tegra-xusb 70090000.xusb: xHCI Host Controller [1.106769] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 1 [1.107501] tegra-xusb 70090000.xusb: hcc params 0x0184f525 hci version 0x100 quirks 0x00050010 [1.107536] tegra-xusb 70090000.xusb: irq 61, io mem 0x70090000 [1.107691] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [1.107697] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [1.107702] usb usb1: Product: xHCI Host Controller [1.107707] usb usb1: Manufacturer: Linux 4.9.140-tegra xhci-hcd [1.107711] usb usb1: SerialNumber: 70090000.xusb [1.108121] hub 1-0:1.0: USB hub found [1.108155] hub 1-0:1.0: 5 ports detected [1.108654] tegra-xusb 70090000.xusb: xHCI Host Controller [1.108664] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 2 [1.108731] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [1.108824] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [1.108830] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [1.108835] usb usb2: Product: xHCI Host Controller [1.108839] usb usb2: Manufacturer: Linux 4.9.140-tegra xhci-hcd [1.108843] usb usb2: SerialNumber: 70090000.xusb [1.110787] hub 2-0:1.0: USB hub found [1.110830] hub 2-0:1.0: 4 ports detected [1.111319] tegra-xudc-new 700d0000.xudc: device count: 1 [1.112227] tegra-xudc-new 700d0000.xudc: USB charger detection disabled [1.112236] tegra-xudc-new 700d0000.xudc: vbus state: 1 [1.112246] tegra-xudc-new 700d0000.xudc: device mode on: 0 [1.112254] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 0 [1.112272] tegra-xudc-new 700d0000.xudc: active: 0 => 1 [1.112710] mousedev: PS/2 mouse device common for all mice [1.112771] usbcore: registered new interface driver xpad [1.179578] tegradc tegradc.0: hdmi: edid read failed [1.184695] tegradc tegradc.0: hdmi: using fallback edid [1.184778] tegradc tegradc.0: blank - powerdown [1.210764] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 2 [1.219281] extcon-disp-state extcon:disp-state: cable 47 state 0 [1.219284] Extcon AUX1(HDMI) disable [1.239976] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [1.242926] rtc rtc1: alarm rtc device [1.242952] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [1.242984] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [1.243856] i2c /dev entries driver [1.246351] i2c i2c-6: Added multiplexed i2c bus 7 [1.246803] i2c i2c-6: Added multiplexed i2c bus 8 [1.246812] i2c-mux-gpio cam_i2cmux: 2 port mux on Tegra I2C adapter adapter [1.247613] imx219 7-0010: tegracam sensor driver:imx219_v2.0.6 [1.250038] tegradc tegradc.0: unblank [1.270888] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x10 [1.270968] imx219 7-0010: imx219_board_setup: error during i2c read probe (-121) [1.271001] imx219 7-0010: board setup failed [1.271102] imx219: probe of 7-0010 failed with error -121 [1.271651] imx219 8-0010: tegracam sensor driver:imx219_v2.0.6 [1.291104] tegradc tegradc.0: nominal-pclk:74250000 parent:74250000 div:1.0 pclk:74250000 73507500~80932500 [1.291198] tegradc tegradc.0: hdmi: tmds rate:74250K prod-setting:prod_c_hdmi_54m_75m [1.292260] tegradc tegradc.0: hdmi: get RGB quant from EDID. [1.292278] tegradc tegradc.0: hdmi: get YCC quant from EDID. [1.294866] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x10 [1.294939] imx219 8-0010: imx219_board_setup: error during i2c read probe (-121) [1.294971] imx219 8-0010: board setup failed [1.295053] imx219: probe of 8-0010 failed with error -121 [1.296469] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [1.299048] extcon-disp-state extcon:disp-state: cable 47 state 1 [1.299052] tegra_soctherm 700e2000.soctherm: pllx_offset tz:0 max:14, min:2 [1.299054] Extcon AUX1(HDMI) enable [1.299057] tegra_soctherm 700e2000.soctherm: pllx_offset tz:2 max:8, min:4 [1.299535] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [1.299579] tegradc tegradc.0: sync windows ret = 250 [1.299584] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when cpu reaches 102500 mC [1.299594] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when cpu reaches 100500 mC [1.299786] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [1.299798] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when gpu reaches 103000 mC [1.299805] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when gpu reaches 101000 mC [1.299948] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [1.299957] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when pll reaches 127000 mC [1.299962] tegra_soctherm 700e2000.soctherm: throttrip: pll: missing hot temperature [1.300138] tegra_soctherm 700e2000.soctherm: failed to register sensor: -19 [1.300689] tegra_aotag tegra-aotag: Registering sensor 0 [1.300731] tegra_aotag tegra-aotag: Invalid temp readout [1.300751] tegra_aotag tegra-aotag: Invalid temp readout [1.300767] tegra_aotag tegra-aotag: Bound to TZ : ID 0 [1.300775] tegra_aotag tegra-aotag: Probe done [SUCCESS]:0 [1.301536] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [1.301550] tegra_dfll_action dfll-cdev-cap: Tegra DFLL 'cap cooling device' registered [1.301694] tegra_aotag tegra-aotag: Invalid temp readout [1.301717] tegra_dfll_action dfll-cdev-floor: Tegra DFLL 'floor cooling device' registered [1.302073] parse_throttle_dt_data: Num cap clks = 6 [1.302076] parse_throttle_dt_data: clk=cclk_g type=2 [1.302082] parse_throttle_dt_data: clk=gpu type=4 [1.302101] parse_throttle_dt_data: clk=cap.throttle.c2bus type=0 [1.302116] parse_throttle_dt_data: clk=cap.throttle.c3bus type=0 [1.302134] parse_throttle_dt_data: clk=cap.throttle.sclk type=0 [1.302136] parse_throttle_dt_data: clk=emc type=3 [1.302438] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [1.302528] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [1.302630] tegra_throttle_probe: probe successful. #cdevs=4 [1.303195] FAN dev name: pwm-fan [1.303237] FAN:gpio request success. [1.303285] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255 [1.303512] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [1.303624] pwm_fan_driver pwm-fan: fan tach request irq success [1.303630] pwm_fan_driver pwm-fan: tach period: 1000 [1.303705] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [1.303709] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2 [1.303714] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2 [1.303718] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2 [1.303721] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [1.303725] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [1.303729] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [1.303733] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [1.303737] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [1.303740] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [1.304306] tegra-wdt 60005100.watchdog: Tegra WDT enabled on probe. Timeout = 120 seconds. [1.304548] tegra-wdt 60005100.watchdog: initialized (timeout = 120 sec, nowayout = 1) [1.305245] device-mapper: uevent: version 1.0.3 [1.305637] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [1.308164] tegra210-cpufreq cpufreq: probe()...completed [1.308892] sdhci: Secure Digital Host Controller Interface driver [1.308893] sdhci: Copyright(c) Pierre Ossman [1.308895] sdhci-pltfm: SDHCI platform and OF driver helper [1.309396] sdhci-tegra sdhci-tegra.0: Got CD GPIO [1.309744] sdhci-tegra sdhci-tegra.0: Client registration for eMC Successful [1.309867] sdhci-tegra sdhci-tegra.0: wakeup init done, cdirq 300 [1.314429] tegra-se 70012000.se: tegra_se_probe: complete [1.314931] hidraw: raw HID events driver (C) Jiri Kosina [1.315643] soctherm: OC ALARM 0x00000001 [1.316952] usbcore: registered new interface driver usbhid [1.316954] usbhid: USB HID core driver [1.319143] tegra21x_actmon 6000c800.actmon: in actmon_register()... [1.319307] tegra21x_actmon 6000c800.actmon: initialization Completed for the device mc_all [1.321125] nvpmodel: initialized successfully [1.322046] usbcore: registered new interface driver snd-usb-audio [1.322101] No Device Node present for smmu client: snd-soc-dummy !! [1.322105] platform snd-soc-dummy: No iommus property found in DT node, got swgids from fixup(101004000) [1.322122] iommu: Adding device snd-soc-dummy to group 36 [1.333366] extcon-disp-state extcon:disp-state: cable 51 state 1 [1.333369] Extcon HDMI: HPD enabled [1.333389] tegradc tegradc.0: hdmi: plugged [1.336023] OPE platform probe [1.336130] OPE platform probe successful [1.336157] OPE platform probe [1.336239] OPE platform probe successful [1.340892] input: tegra-hda HDMI/DP,pcm=3 as /devices/70030000.hda/sound/card0/input0 [1.355068] mmc0: SDHCI controller on sdhci-tegra.0 [sdhci-tegra.0] using ADMA 64-bit with 64 bit addr [1.366017] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [1.366150] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [1.366265] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [1.366380] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [1.366501] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [1.366616] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [1.366755] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [1.366872] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [1.366990] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [1.367108] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [1.378659] u32 classifier [1.378662] Actions configured [1.378750] Initializing XFRM netlink socket [1.379456] NET: Registered protocol family 10 [1.380152] NET: Registered protocol family 17 [1.380165] NET: Registered protocol family 15 [1.380241] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [1.380284] Bluetooth: RFCOMM socket layer initialized [1.380296] Bluetooth: RFCOMM ver 1.11 [ 1.380ntel/ibt-12-16.ddc [7.316543] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [7.316554] Bluetooth: BNEP socket layer initialized [7.316956] Bluetooth: hci0: Applying Intel DDC parameters completed [7.466897] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-8265-24.ucode failed with error -2 [7.476138] soctherm: OC ALARM 0x00000001 [7.481524] iwlwifi 0000:01:00.0: Falling back to user helper [7.509716] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-8265-23.ucode failed with error -2 [7.519515] iwlwifi 0000:01:00.0: Falling back to user helper [7.555286] iwlwifi 0000:01:00.0: loaded firmware version 22.391740.0 op_mode iwlmvm [7.635608] iwlwifi 0000:01:00.0: Detected Intel(R) Dual Band Wireless AC 8265, REV=0x230 [7.638113] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled [7.639035] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled [7.759423] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [7.766974] thermal thermal_zone6: failed to read out thermal zone (-5) [7.773609] thermal thermal_zone6: Registering thermal zone thermal_zone6 for type iwlwifi [7.823631] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [7.826080] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled [7.826517] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled [7.852768] tegradc tegradc.0: blank - powerdown [7.852778] tegradc tegradc.1: blank - powerdown [7.945438] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled [7.945874] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled [8.004316] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [8.068572] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [8.528418] fuse init (API version 7.26) [8.557102] soctherm: OC ALARM 0x00000001 [10.317436] soctherm: OC ALARM 0x00000001 [10.762974] l4tbr0: port 1(rndis0) entered blocking state [10.762979] l4tbr0: port 1(rndis0) entered forwarding state [10.763106] IPv6: ADDRCONF(NETDEV_UP): l4tbr0: link is not ready [10.763120] IPv6: ADDRCONF(NETDEV_CHANGE): l4tbr0: link becomes ready [12.469704] soctherm: OC ALARM 0x00000001 [13.574059] soctherm: OC ALARM 0x00000001 [14.644625] soctherm: OC ALARM 0x00000001 [15.650567] soctherm: OC ALARM 0x00000001 [24.642363] soctherm: OC ALARM 0x00000001 ``` lsusb shows the Intel 8265 Wifi card on the M.2 but nothing else. It should be showing an SSD, 2 cameras and 4G module, and the dev board Realtek hub. We have used this exact setup several times before with no issue so I don’t believe it is the devices attached. ``` Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0a2b Intel Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub ``` Any help with debugging this issue would be appreciated. ---
**Author:** ![WayneWWW](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/waynewww/32/14043_2.png) [@WayneWWW](https://forums.developer.nvidia.com/u/WayneWWW)\ **Post date:** [March 25, 2021, 3:23am UTC](https://forums.developer.nvidia.com/t/usb-hub-issue-hub-not-present-no-power-to-devices/173271/3 "2021-03-25T03:23:59Z")
Looks like the hub is broken. Do you only have one jetson nano devkit carrier board there? ---
**Author:** ![Luke\_B](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@Luke\_B](https://forums.developer.nvidia.com/u/Luke_B)\ **Post date:** [March 25, 2021, 6:44am UTC](https://forums.developer.nvidia.com/t/usb-hub-issue-hub-not-present-no-power-to-devices/173271/4 "2021-03-25T06:44:09Z")
We have a couple, I can swap some hardware around to verify it is the carrier board and not the module. Any ideas how it broke or ways to avoid it? ---
**Author:** ![WayneWWW](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/waynewww/32/14043_2.png) [@WayneWWW](https://forums.developer.nvidia.com/u/WayneWWW)\ **Post date:** [March 25, 2021, 7:43am UTC](https://forums.developer.nvidia.com/t/usb-hub-issue-hub-not-present-no-power-to-devices/173271/5 "2021-03-25T07:43:17Z")
This is hard to find out how it got broken. What kind of devices did you use to connect on it? ---
**Author:** ![Luke\_B](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@Luke\_B](https://forums.developer.nvidia.com/u/Luke_B)\ **Post date:** [March 28, 2021, 10:28pm UTC](https://forums.developer.nvidia.com/t/usb-hub-issue-hub-not-present-no-power-to-devices/173271/6 "2021-03-28T22:28:33Z")
We had an SSD via USB 3.0 to SATA adapter, 2 USB cameras and a 4G module connected to the development board. Like I said, we have used this setup quite a bit without issue so I doubt it is the downstream devices. Those devices work fine with other dev boards.