Using crossing lines in MIPI


We have a camera port ‘A’ which has 4 lines mipi CSI_A_D0, CSI_A_D1, CSI_A_D2 and data3.
Also we have a camera set so that it works with two mipi lines: cam_data0 - CSI_A_D0, cam_data1 - CSI_A_D1.
Is it possible to set jetson nano configuration so that cam_data0 is connected with CSI_A_D1 and cam_data1 is connected with CSI_A_D0? (i.e. lines CSI_A_D0, CSI_A_D1 are crossed)

Thank you!

Sorry to tell TX1/Nano not support the lane SWIZZLE.

Thank you for your help!