Using libargus with other camera sensors on TX1

Hi all,

I have seen some questions about using libargus with other camera sensors, I wanted to share that it is possible to create your own driver and at the same time use libargus.

We already gave it a try with our imx219[1] and ov5647[2] camera sensor drivers. We have tested the argus samples including oneShot, cudaHistogram, openglBox and facedetect without issues!

Here is a quick video that demonstrates the OV5647 sensor running the openglBox and facedetect samples on the TX1:

Best Regards,



Dear Marco,

Have you developed a sensor with WDR,such as OV2718 or AR0331 etc.

Best Regards,