Suppose the problem cause by improper pix_clk_hz/serdes_pix_clk_hz to allocate less NVCSI/VI bandwidth. You can increase it in your device tree to verify.
Related topics
| Topic | Replies | Views | Activity | |
|---|---|---|---|---|
| After the firmware is updated using Topic268833_JP-512_rce-fw.7z, some boards still fail to run video capture for a period of time | 12 | 80 | January 10, 2025 | |
| Jetson ORIN NX camera crash issue during streaming | 2 | 24 | August 11, 2025 | |
| Issue with porting sensor driver on Jetson Linux 35.4.1 | 8 | 502 | February 13, 2024 | |
| Camera captured abnormal image | 6 | 109 | July 9, 2024 | |
| Error bringup board CHANSEL_NOMATCH | 11 | 189 | June 19, 2024 | |
| Video node available but data not streaming | 43 | 1988 | August 11, 2023 | |
| Jetson AGX Orin camera ov5640 get strream Error! | 3 | 402 | September 13, 2023 | |
| Orin NX v4l2/gstreamer starting stream timeout error | 11 | 1010 | July 19, 2023 | |
| The connection of Jetson Orin NX to the streaming camera failed | 7 | 62 | December 10, 2024 | |
| Unable to stream CSI camera video under the new Jetpack 6.2 | 16 | 452 | March 2, 2025 |