Welcome to the Jetson Projects forum!

Good day,
I went to purchase the jet bot and found that it was discontinued. I am looking at a starting point to Nvidia and robotics. I have the nano, jetson tx2, and xvaier for my classroom. Any assistance in purchasing a kit/getting started would be appreciated.

Hi dmeyers99, where were you trying to purchase the JetBot? Was it a kit or from individual components?

If you check out the following page, various distributors for JetBot kits are listed:

Those distributors which are out of stock should have stock again shortly.

We’ve posted a bunch of handy resources and how-to guides from the community under the ‘Community Resources’ section found here:


Thanks to everyone who has contributed!

1 Like

Hello Team,
I am a Research student in AI and I have previous experience as Firmware engineer , more into embedded systems. I would like to know what extra AI related projects we can do after purchasing Jetbot, Facial Recognition, Line tracking, Obstacle Avoidance are already present as per of Nvidia library , which new interesting AI problems can be solved using the vision system of Jetbot, or Please list few projects and respective references for AI project ideas to be implemented using Jetbot.

Please do the needful.

Thanks and Regards
Abhijith N.M.

Hi @abimsstudy, you can find some drone project using Jetson on this page: https://developer.nvidia.com/embedded/community/jetson-projects

And also here: https://github.com/nvidia-ai-iot/redtail

Hello Team Nvidia,
Thank you for the quick response. The link you shared me definitely helps.
Please do share me projects references which are specific to Deep reinforcement learning as well. Please do the needful.

Thank you.

Abhijith N.M.

See these projects about reinforcement learning:

Hello Team,

I am checking for Jetbot in Nvidia site. we have.

  1. SparkFun JetBot AI Robot Kit

  2. Waveshare JetBot AI Kit

  3. Yahboom AI Robot for NVIDIA Jetson Nano B01 A02, Coding Robotics Kit with Autopilot, Object Tracking, Face and Color Recognition.

SparkFun JetBot AI Robot Kit has interactive AI tutorials, JetBot ROS (Robot Operating System), and out-of-the-box AWS cloud support.

Waveshare JetBot AI Kit has advantage of NVIDIA AI for facial recognition, obstacle avoidance, object tracking, and line following. even recharge the Waveshare JetBot while it’s running

Yahboom AI Robot for NVIDIA Jetson Nano B01 A02, Coding Robotics Kit has

  • Customized 8 million HD camera, 3 DOF camera head
  • 87 kinds of 178 structural components including customization
  • High-precision PID algorithm color tracking application capable of fast response
  • High-precision PID algorithm face tracking application capable of fast response
  • Obstacle avoidance model training multi-environment automatic obstacle avoidance application
  • Object-following application with high-precision differential PID algorithm that can respond quickly
  • Track model training automatic driving application
  • FPV (first person view) video real-time display independent of PC control, motion remote control,Multi-AI function integrated in one mobile phone mobile Android, IOS dual system-side APP blessing
  • PC side interactive programming through a web browser, providing basic motion control, AI framework use,AI model training, handle remote lever full range variable speed remote control, automatic obstacle avoidance, automatic follow, automatic driving, etc.The underlying code multi-routine tutorial, Jupyter notebook.
  • AI online programming debugging, AI model training
  • Support CUDA acceleration, PyTorch, TensorFlow and other mainstream AI frameworks and AI Getting Started Machine Learning Platform from 0 to 1 Tutorial

Please do let me know which AI kit is better considering I can execute the Nvidia example projects mentioned above.
And with best AI framework and AI library support and I can build cutting edge AI related projects.
Better build quality of robot body and better ROS community support.

Please do the needful.

Thanks and Regards
Abhijith N.M.

1 Like

All of the JetBot kits that run the project from https://github.com/NVIDIA-AI-IOT/jetbot are shown on this page:

I believe the Yahboom one is a different kit that uses different software than the NVIDIA JetBot project. So if you want to run JetBot, I recommend picking one of the JetBot kits from above. Which JetBot kit is up to your personal preferences and availability.

1 Like

Hello Team,

Which one would be better considering execution of Nvidia AI projects and Cutting Edge AI concepts.

  1. SparkFun JetBot AI Robot Kit

  2. Waveshare JetBot AI Kit

Thanks and Regards
Abhijith N.M.

The link to the Waveshare JetBot kit is here: https://www.amazon.com/Waveshare-JetBot-AI-Kit-Accessories/dp/B081LF98T8/?th=1

(what was previously linked to was just the accessories)

Both of the SparkFun and Waveshare kits run the NVIDIA JetBot project from GitHub, so their AI capabilities are roughly the same. At that point, it is basically up to which of the robot assemblies you prefer.

Since the SparkFun kit is currently on backorder, and Amazon has some stock of the Waveshare kit, perhaps that can help you decide.

Dear Sir:

Our company is new to the Nvida Xavier NX. I am hoping to share my project onto the Nvidia community project. May I ask how I can do? Could you please share more details to me? Your feedback is highly appreciated.


Hi @dusty_nv
this is my modest contribution to the war against the COVID19: I realized a Fever Control application on Jetson Nano integrating the FLIR Lepton3 thermal sensor.
The project is mainly a tutorial about using the SPI and I2C ports of the Nano at the same time, changing the buffer size of the Nano to match the requirements of the FLIR sensor.
Thermal images retrieved from the FLIR sensor are analyzed searching for temperatures in the Human Body range and triggering warnings and alerts when the values are too high.

Blog post: https://www.myzhar.com/blog/jetson-nano-with-flir-lepton3/
Hackster: https://www.hackster.io/Myzhar/covid19-fever-control-with-jetson-nano-and-flir-lepton3-7f57fc
YouTube: https://youtu.be/SFStaq--3-U


1 Like

Hi @dusty_nv
Here is my new interesting Jetson project called patrolling robot. The idea is to have a robot that patrols the huge parking space under or inside the commercial building to detect the illegal parking cases. As a prototype, I have integrated Jetbot (Jetson Nano inside) and 2 CSI cameras to perform the following tasks:

  • Path Navigation: navigate through the predefined path on the table in the meeting room.
  • Collision Avoidance: When navigating the predefined path, the Jetbot stops while detecting some specific objects in front of it and moves again while the objects are removed.
  • Object Detection in the office and the car park: to detect persons, chairs, cars and other common objects in the office and the car park.
  • Illegal Parking Detection: By using toy cars, I simulated a case that the robot could be able to detect the illegal parking case(it’s referring to that a car parks across 2 parking lots).

Hi @lzlallen1980, sounds like a very capable robot! Do you have a link to your project that you could post?

Hi @dusty_nv

here is the link of the video: https://drive.google.com/drive/folders/1H3PtGIfYOGZCts0jYpFN22tTe61db3Am?usp=sharing

and here is the code uploaded to github : https://github.com/Ryan-ZL-Lin/jetbot-customization

please let me know if you need other information, thanks.

Hi Team,

I am facing a firewall issue while accessing the Jetson Xavier NX remotely. I need to access to my Jetson Xavier device from outside my device network like a Team viewer or any kind of SSH activity.
The main thing is that to connect the system to an internet and remote access it globally.
Guys please suggest me a solution, I done normal ubuntu method but got stuck in connecting area.
Thanks in advance

This is probably best moved to the NX forum as a new post:

FYI, ssh is already available by default, and should “just work”. However, if your Jetson is behind a router, then by default a router won’t know which IP to forward to when ssh requests to connect from the outside (versus when ssh originates from inside the router computers). If that is the case, then you’ll need admin access to the router to add a rule for forwarding ssh to the NX.

If there is a firewall involved, then this too would require administrative access to allow incoming ssh which did not originate by the NX.

In either case there is nothing the NX can do or control to change the router or an external firewall.

Any kind of virtual desktop environment will have the same instructions, except the port(s) and protocol will probably be different. You’d need to install something like Vino for the virtual desktop, but then you’d be back to the router configuration before it would work.

an error keep appearing continuously (broken package ) any idea to help

Hi @kareimellithy49, please file a new topic about your issue (along with the error message / console output) in one of the Jetson forums (for example, the Jetson Nano forum if you are using Jetson Nano)

1 Like