What are the properities in the dstest4_msgconv_config.txt refered to?

What do these items mean? How to change it? The linkage on similar question is unavailable. Any helpful suggestion are welcome. Thanks.


[sensor0]
enable=1
type=Camera
id=CAMERA_ID
location=45.293701447;-75.8303914499;48.1557479338
description=“Entrance of Garage Right Lane”
coordinate=5.2;10.1;11.2

[place0]
enable=1
id=1
type=garage
name=XYZ
location=30.32;-40.55;100.0
coordinate=1.0;2.0;3.0
place-sub-field1=walsh
place-sub-field2=lane1
place-sub-field3=P2

[place1]
enable=1
id=1
type=garage
name=XYZ
location=28.47;47.46;1.53
coordinate=1.0;2.0;3.0
place-sub-field1=“C-76-2”
place-sub-field2=“LEV/EV/CP/ADA”
place-sub-field3=P2

[analytics0]
enable=1
id=XYZ
description=“Vehicle Detection and License Plate Recognition”
source=OpenALR
version=1.0

These are the predefined values for cameras/sensors

[place0]
enable=1
id=1
type=garage
name=XYZ
location=30.32;-40.55;100.0
coordinate=1.0;2.0;3.0
place-sub-field1=walsh
place-sub-field2=lane1
place-sub-field3=P2

This example - I think they are using the endeavor garage sensor location description

For the real usecase, it could be anything based on the location of the sensor being used. Users have to modify this fields and add suitable values mathcing the usecase

in this exmaple : you can think oif it as - its near the walsh street intersection, lane1 of the garapage and the garage level is P2

this is specific for the endeavor garage usecase