Hi,
There are some topics involved to tegrarecovery & tegrareset commands, which are in ttyACM1 of DDPX Aurix Serial Console.
tegrarecovery x1 on
tegrareset x1
Do I need to run tegrarecovery x1 off again once flashing finished? since Aurix always flashing again after reboot, which means the boot loop occurred. Logs attached also. Bootburn completed successfully.log (608.2 KB) bootloop.log (249.6 KB)
When I type help command, I can see there are many commands for Aurix.
But how can I use them and where it’s refereance manual?
Hi @Keelung
Are you on DRIVE AGX Orin or Xavier? Please use SDK Manager to flash your devkit system.
Please also provide the following info by ticking the boxes:
Software Version
DRIVE OS 6.0.4 SDK
other
Target Operating System
Linux
QNX
other
Hardware Platform
DRIVE AGX Orin Developer Kit (940-63710-0010-D00)
DRIVE AGX Orin Developer Kit (940-63710-0010-C00)
DRIVE AGX Orin Developer Kit (not sure its number)
other
SDK Manager Version
1.8.3.10426
other
Host Machine Version
native Ubuntu Linux 20.04 Host installed with SDK Manager
native Ubuntu Linux 20.04 Host installed with DRIVE OS Docker Containers
native Ubuntu Linux 18.04 Host installed with DRIVE OS Docker Containers
other