AGX Xavier DK uses Type-C data cable for system installation. As far as I know, TYPE-C is part of USB3.1, and USB3.1 is backward compatible with USB3.0 and USB2.0, So which USB protocol does XAVIER use when installing the system? Which USB protocol does the Type-C interface on Xavier DK use? When …

Which USB protocol does AGX Xavier DK use when installing the system?

edli1983 July 31, 2020, 2:08am 5

It is fine to support USB2.0 if you don’t want Type-C port.
USB3.1 is not necessary.

Topic		Replies	Views
Jetson AGX Xavier USB Jetson AGX Xavier hw	2	501	October 18, 2021
Customize USB 3.1 to Type C Jetson Xavier NX board-design	4	1012	October 18, 2021
Jetson AGX Xavier Developer Kit \| USB 3.1 DRIVE AGX Xavier General	2	859	October 12, 2021
Xavier Flashing through USB Jetson AGX Xavier	7	1051	October 18, 2021
Xavier USB issue Jetson AGX Xavier usb	2	418	October 18, 2021
USB3.0 device Jetson AGX Xavier	3	608	October 18, 2021
USB-A with AGX Jetson AGX Xavier usb	5	1080	October 18, 2021
USB interface for flashing img to Xavier Jetson AGX Xavier	4	793	October 18, 2021
Custom carrier board with usb 2.0 type a Jetson AGX Xavier usb , board-design	2	502	October 18, 2021
Self defined Xavier carrier board can't recognize Micro-USB and USB3.0 TYPE-A Jetson AGX Xavier	9	749	October 18, 2021