dear sirs: There is a puzzling issue，please help me. only add FDT cmd to /boot/extlinux/extlinux.conf in SSD disk, the jetson nano can’t power on successfully. but delete the FDT cmd，the system power on successfully. the modify info is following: TIMEOUT 30 DEFAULT primary MENU TITLE L4T boot…

Jetson nano sd module has two boot components on the module. One QSPI-NOR which has the bootloader sw, while another one is the SDCARD. Keep replacing the sdcard image would only lead the sdcard part software (kernel,dtb) gets updated, but the content in QSPI-NOR is still the same. That is what l…

Why jetson nano can't power on while adding FDT in /boot/extlinux/extlinux.conf?

Robotics & Edge Computing Jetson & Embedded Systems Jetson Nano

WayneWWW August 19, 2021, 5:06am 3

Topic		Replies	Views
Why my jetson nano doesn't boot if I use a DTB file? Jetson Nano boot	74	2461	October 15, 2021
Jetson Nano L4T32.5.2 extlinux.conf APPEND does not work Jetson Nano kernel , device-tree	9	2053	December 8, 2021
Jetpack 4.3 cannot boot on Jetson Nano after jetpack4.5 boot Jetson Nano jetpack , boot	15	1025	September 12, 2021
Boot from SD Card Jetson TX1	26	14369	April 13, 2017
Extlinux.conf: Kernel command line options not appended when using FDT Jetson Nano boot , kernel , nvbugs	9	4522	October 15, 2021
Jetson Nano broken? Jetson Nano	3	1524	October 15, 2021
Jetson nano no longer boots Jetson Nano boot	5	995	October 15, 2021
Jetson Nano boot errors after flashing with jetpack 4.2.1 Jetson Nano	22	2685	October 15, 2021
Jetson Nano was working until yesterday, now not booting Jetson Nano boot	11	1160	March 9, 2022
Jetson Nano does not boot - power led switch off after Nvidia LOGO Jetson Nano	2	1569	October 15, 2021

Why jetson nano can't power on while adding FDT in /boot/extlinux/extlinux.conf?

Related topics