On our custom board, we change the phy chip to DP83867. I enable the dp83867 kernel module in Xavier SOM. But when system boot up, Xavier have many kernel info as follow: [2020/4/18 12:32:54] [ 19.463262] eqos 2490000.ether_qos eth0: Link is Up - 1Gbps/Full - flow control rx/tx [2020/4/18 12:32…

Please check if this topic can help. [image] Ethernet not work on my custome carrier board Jetson AGX Xavier we use 88E1512PB2-NNP2C000 same as develop kit, the schematic diagram is the same, but doesn’t work. The dmesg error show "eth0: Colud not attach to PHY net e…

Xavier eth0 don't work after changing phy chip

Autonomous Machines Jetson & Embedded Systems Jetson AGX Xavier

WayneWWW April 20, 2020, 3:12am 3

Please refer to this thread.

Need to check if the mdio bus has dp83867 first.