Xavier_nx camera bring up fail

Dear community,

camera no mipi on xavier nx platform,How to configure CSI0 andCSI1 to CSI*4,Thanks


Moving this to the Jetson Xavier NX forum from Drivers.

If you asking driver configure. You need modify the port-index/bus-width/tegra_sinterface in the device tree.

https://docs.nvidia.com/jetson/l4t/index.html#page/Tegra%20Linux%20Driver%20Package%20Development%20Guide/camera_sensor_prog.html#wwpID0E0Q50HA

1 Like