Xavier NX reset / flash buttons

okay trying to flash the xavier nx, i dont see any “buttons” for reset / flash mode … i know on the nano dev kit i needed to jumper the pin heads. so how to get this into flash mode ?

With the NX DevKit carrier board? It’s exactly the same process. The pins are under the module facing “front” away from the USB/video/Network ports. That’s the same place as the Nano rev B01 devkit board but different than the original Nano devkit board.

https://developer.download.nvidia.com/assets/embedded/secure/jetson/Xavier%20NX/Jetson_Xavier_NX_DevKit_Carrier_Board_Specification_v1.0.pdf

1 Like

yupp found it… all good now