Hi, I am looking for some kind of user guide/config guide for these multi-port s-parameters - specifically how to use them in Hyperlynx. It’s not clear from examining the file how to assign the ports and wire them for e.g.) the Tx channel from the package die out through the connector. The names …

Xavier NX S-Parameter Port Mapping

Trumany September 19, 2022, 3:40am 3

Hi, the mapping is Port[1] to [9] and [2] to [10]…as the same ‘RX1…’ in name.

Topic		Replies	Views
S-parameters for Jetson Xavier NX Jetson Xavier NX	8	396	October 25, 2023
S-parameters and ibis models of Xavier module and chip Jetson AGX Xavier	9	808	October 18, 2021
Design files of Jetson Xavier NX SOM module Jetson Xavier NX board-design , documentation	2	546	October 31, 2023
Jetson Xavier IBIS Models Jetson AGX Xavier hw	8	554	October 18, 2021
Orin S-parameter files unsymmetric (unidirectional connections) Jetson Orin NX documentation	3	380	March 19, 2024
Jetson Xavier NX IBIS and S-Parameter Models Jetson Xavier NX	2	349	October 18, 2021
Confusing Port/Pad/Lane/(U)PHY assignments in USB-Plattform Adaptation for Xavier NX Jetson Xavier NX usb , board-design , device-tree	6	1581	October 18, 2021
How to change PEX_TX\RX 11(UPHY) from PCIE to USB3 port3 in Jetson Xavier NX Jetson Xavier NX usb	5	378	August 3, 2022
IBIS/S-Parameter 'Read me' Jetson AGX Xavier	3	822	October 18, 2021
buffer models for USB2/3 and Ethernet for Jetson TX1 Jetson TX1	2	531	October 18, 2021