Xavier NX wifi on SDIO/USB

[WayneWWW]

Hi,

1. NV does not verify SDIO wifi on NX. Thus, I can only share experience from other users.

WiFi bring up on custom carrier board

@WayneWWW These are the dts changes for WiFi bring up on Xavier NX, sdhci@3440000 { #address-cells = <1>; #size-cells = <0>; non-removable; force-non-removable-rescan; no-sd; max-clk-limit = <25000000>; only-1-8-v; status = “okay”; brcmf: brcmf@0 { reg = <0>; compatible = “brcm,bcm4329-fmac”; }; }; and used latest brcmfmac driver from cypress, Thanks, Arun

2. You may already checked this page. Since you are using Intel card, I would suggest you can check if their card supports SDIO interface first. If they do, then please check with them if they can share the spec and any DT sample.