|
Question on Host-chaining ConnectX5 card IP setup
|
|
3
|
321
|
July 8, 2020
|
|
How to mapping PCIe (my Connect x5 NIC) to spesific NUMA node?
|
|
1
|
359
|
June 30, 2020
|
|
ConnectX-5 - Can't change VF's DSCP value of CNP from 0
|
|
1
|
189
|
June 29, 2020
|
|
Hi
I am using a MT27520 Family [ConnectX-3 Pro] 10G dual port card with SR-IOV enable, but the vf can not set to promisc mode, how can I debug what heppen? Meanwhile I have a ConnectX-3 Pro 40G nic but without this error.
|
|
1
|
250
|
June 22, 2020
|
|
Good morning,
I'm currently trying to establish a connection between 2 Mellanox SH2200 and 2 Cisco switches but I can't for the life of me ping anything.
Can you give me some help?
Regards,
Francisco Brito
|
|
3
|
189
|
June 8, 2020
|
|
Issue with ConnextX-6 SP in Dell R6525 (AMD EPYC 7542/7742)
|
|
2
|
185
|
May 19, 2020
|
|
RoCE dramatic loss in throughput.
|
|
1
|
163
|
May 12, 2020
|
|
Why is ConnectX-4 IB performance (on iperf, iperf3, qperf, etc.) not close to 100Gbps but physical link info looks good?
|
|
1
|
333
|
April 20, 2020
|
|
Message sequence number while responding to a retried read request
|
|
1
|
183
|
April 20, 2020
|
|
Building krping with MLNX OFED drivers failing (unknown symbols)
|
|
3
|
214
|
April 11, 2020
|
|
Compute node do not recognized infiniband cable(network cable unplugged issue)
|
|
2
|
220
|
March 31, 2020
|
|
iSER under ESXI 6.7 can not bind network port
|
|
1
|
183
|
March 26, 2020
|
|
hang on cm_destroy_id when NIC is down using the MLNX-OFED 4.7-3.2.9.0
|
|
1
|
95
|
March 19, 2020
|
|
Pinging between KVM guests using IPOIB over Virtual Functions.
|
|
1
|
206
|
January 14, 2020
|
|
How can I run MPI between different version of HCAs (eg. ConnectX-3 and ConnectX-4) in a subnet?
|
|
1
|
257
|
December 22, 2019
|
|
Only seeing about 160MB/s on file transfers between two Ubuntu desktops with Mellanox DAC cables and Mellanox cards.
|
|
1
|
147
|
December 11, 2019
|
|
I am trying to run four instances of ib_send_bw with UD between two computers with four MCX515A-CCAT NICs installed in each. I can run two instances. The third fails with an error.
|
|
3
|
257
|
November 7, 2019
|
|
What is the use of Mellanox MT27800 Family ConnectX-5 virtual ports?
|
|
5
|
615
|
October 16, 2019
|
|
I am trying to install a driver for another NIC, and I'm getting an error due to a conflict with a Mellanox file
|
|
1
|
143
|
October 15, 2019
|
|
How to install a vpi-single-switch system file for switch Mellanox MLNX-OS MSB7700?
|
|
1
|
186
|
October 12, 2019
|
|
Data transfer between NIC and HOST
|
|
3
|
172
|
September 17, 2019
|
|
Help on installing MLNX_OFED_LINUX for Oracle Linux with UEK kernel
System is running 4.1.12-124.25.1.el6uek.x86_64 UEK kernel and the adapter Mellanox Technologies MT27500 Family [ConnectX-3] with FW 2.36.5150
|
|
1
|
176
|
February 17, 2019
|