# \#define

**URL:** https://forums.developer.nvidia.com/tag/define/617.md

[Latest](https://forums.developer.nvidia.com/latest.md) · [Categories](https://forums.developer.nvidia.com/categories.md) · [Tags](https://forums.developer.nvidia.com/tags.md)

---

## [ConnectX-6 DX - packet drop when enabling RSS / rxqueues](https://forums.developer.nvidia.com/t/connectx-6-dx-packet-drop-when-enabling-rss-rxqueues/205951)

<div class="topic-metadata">

**Author:** [@roeder.tobias](https://forums.developer.nvidia.com/u/roeder.tobias)\
**Replies:** 4\
**Last updated:** [January 29, 2022, 8:24am UTC](https://forums.developer.nvidia.com/t/connectx-6-dx-packet-drop-when-enabling-rss-rxqueues/205951 "2022-01-29T08:24:25Z")

</div>

TLDR: (/) full 100Gbps performance traffic-gen → DuT when RSS disabled (X) significant packet drop with RSS enabled for TCP packets Testsetup: Intel Icelake based test setup NICs Mellanox ConnectX-6 DX Dual Port 100…

---

## [RSS doesn't work for Mellanox ConnectX-6 DX](https://forums.developer.nvidia.com/t/rss-doesnt-work-for-mellanox-connectx-6-dx/205940)

<div class="topic-metadata">

**Author:** [@tmartiro](https://forums.developer.nvidia.com/u/tmartiro)\
**Replies:** 2\
**Last updated:** [December 13, 2021, 11:48am UTC](https://forums.developer.nvidia.com/t/rss-doesnt-work-for-mellanox-connectx-6-dx/205940 "2021-12-13T11:48:56Z")

</div>

Hi, While testing dpdk(v19.11.10) application we noticed that nic card didn’t update mbuf.hash.rss value despite the fact that rxmode.mq\_mode = ETH\_MQ\_RX\_RSS\_FLAG was set. Is there any other way to enable RSS on the ca…

---

## [ConnectX-6 Dx Crypto and Secure Boot, XDP Hardware offload not possible because of IPSec?](https://forums.developer.nvidia.com/t/connectx-6-dx-crypto-and-secure-boot-xdp-hardware-offload-not-possible-because-of-ipsec/206198)

<div class="topic-metadata">

**Author:** [@david.herberth](https://forums.developer.nvidia.com/u/david.herberth)\
**Replies:** 1\
**Last updated:** [February 14, 2021, 7:10am UTC](https://forums.developer.nvidia.com/t/connectx-6-dx-crypto-and-secure-boot-xdp-hardware-offload-not-possible-because-of-ipsec/206198 "2021-02-14T07:10:39Z")

</div>

Hey, I am trying to offload a simple XDP Program to hardware on my ConnectX-6 Dx Crypto and Secure boot device. e.g. the xdp1 kernel sample (linux/samples/bpf at master · torvalds/linux · GitHub): idp@shs01-muc5-fw:~/…

---

## [What's needed to make IBV\_WQ\_FLAGS\_DELAY\_DROP work?](https://forums.developer.nvidia.com/t/whats-needed-to-make-ibv-wq-flags-delay-drop-work/206317)

<div class="topic-metadata">

**Author:** [@system](https://forums.developer.nvidia.com/u/system)\
**Replies:** 1\
**Last updated:** [October 5, 2020, 7:03am UTC](https://forums.developer.nvidia.com/t/whats-needed-to-make-ibv-wq-flags-delay-drop-work/206317 "2020-10-05T07:03:08Z")

</div>

I’m trying to experiment with Ethernet flow control (just global pause frames so far, no PFC). I’ve managed to make it work for the kernel stack using ethtool --set-priv-flags $iface dropless\_rq on, but I’m having troubl…

---

## [igmp mlag vlan config right?](https://forums.developer.nvidia.com/t/igmp-mlag-vlan-config-right/207155)

<div class="topic-metadata">

**Author:** [@mario.hosse](https://forums.developer.nvidia.com/u/mario.hosse)\
**Replies:** 2\
**Last updated:** [June 25, 2018, 6:04am UTC](https://forums.developer.nvidia.com/t/igmp-mlag-vlan-config-right/207155 "2018-06-25T06:04:51Z")

</div>

Hello, Setup 2xSX1012 VERSION 3.6.4112 IGMP in mlag please help me! I have a installation with 4xNode with 2x40Gb Ethernet on node and need IGMP snooping with querier on vlan 1. Configuration of the SX1012: Port 1-4 …

---

## [NVMeOF SLES 12 SP3 :  Initiator with 36 cores unable to discover/connect to target](https://forums.developer.nvidia.com/t/nvmeof-sles-12-sp3-initiator-with-36-cores-unable-to-discover-connect-to-target/207380)

<div class="topic-metadata">

**Author:** [@madhan.balasubramanian](https://forums.developer.nvidia.com/u/madhan.balasubramanian)\
**Replies:** 3\
**Last updated:** [December 13, 2017, 9:35am UTC](https://forums.developer.nvidia.com/t/nvmeof-sles-12-sp3-initiator-with-36-cores-unable-to-discover-connect-to-target/207380 "2017-12-13T09:35:23Z")

</div>

Hi, I am trying NVMeOF with RoCE on SLES 12 SP3 using the document HowTo Configure NVMe over Fabrics https://community.mellanox.com/s/article/howto-configure-nvme-over-fabrics I am noticing that whenever the initiator…

---

## [ConnectX-2 CQE remote access error (Protection Error on remote data buffer) vendor syndrome 0x88](https://forums.developer.nvidia.com/t/connectx-2-cqe-remote-access-error-protection-error-on-remote-data-buffer-vendor-syndrome-0x88/207715)

<div class="topic-metadata">

**Author:** [@timothy.epp](https://forums.developer.nvidia.com/u/timothy.epp)\
**Replies:** 0\
**Last updated:** [May 13, 2016, 7:49pm UTC](https://forums.developer.nvidia.com/t/connectx-2-cqe-remote-access-error-protection-error-on-remote-data-buffer-vendor-syndrome-0x88/207715 "2016-05-13T19:49:06Z")

</div>

Dell hardware running Oracle Solaris 11.3 serving as a storage appliance: Kernel version: SunOS 5.11 11.3 Entire Version : 0.5.11-0.175.3.4.0.5.0 System Type: Dell PowerEdge R730xd pci bus 0x0081 cardnum 0x00 functio…

---

## [ConnectX-2: mlx4\_en: Port: 1, invalid mac burned: 0x0, quiting](https://forums.developer.nvidia.com/t/connectx-2-mlx4-en-port-1-invalid-mac-burned-0x0-quiting/208217)

<div class="topic-metadata">

**Author:** [@harjoc](https://forums.developer.nvidia.com/u/harjoc)\
**Replies:** 21\
**Last updated:** [April 23, 2013, 7:13pm UTC](https://forums.developer.nvidia.com/t/connectx-2-mlx4-en-port-1-invalid-mac-burned-0x0-quiting/208217 "2013-04-23T19:13:20Z")

</div>

Hello, I’m trying to use the mlx4\_en driver instead of mlx4\_ib to hopefully increase bandwidth in a filtering device that uses ConnectX-2 MT26428 adapters). I did a fresh install of CentOS-6.2 since the infiniband adapt…
