ethtool
| Topic | Replies | Views | Activity | |
|---|---|---|---|---|
| [r35.2.1]Jetson AGX Orin Set Wake-On-Lan Fail |
|
2 | 13 | August 12, 2024 |
| [r35.2.1]Jetsen AGX Orin set Wake-On-Lan Fail |
|
4 | 19 | August 12, 2024 |
| How to connect jetson nano to the ethernet cable |
|
2 | 361 | November 21, 2023 |
| Link Down between ConnectX6-Dx and Cisco Nexus 5624Q |
|
2 | 749 | November 14, 2023 |
| Setup infiniband on kubernetes |
|
2 | 1631 | January 25, 2022 |
| We have a Mellanox Technologies MT27630 Family and Mellanox Technologies MT27710 Family cards that has pre-set maximums RX 64 and TX 8192, is it possible to have the RX value increased? |
|
3 | 959 | August 31, 2021 |
| rx_discards_phy |
|
2 | 2222 | February 14, 2021 |
| how to capture Roce with tcpdump and ethtool in connectX4 and centOS 7.4 and OFED 5.1? |
|
2 | 1123 | November 24, 2020 |
| 100GbE cable not communicating with Cisco 9508 |
|
13 | 781 | October 22, 2019 |
| ERROR : MT26448 ethtool - m > Cannot get module EEPROM information:Input/output error |
|
2 | 2511 | August 3, 2019 |
| DPDK-OVS using connectx3-Pro binding issues |
|
10 | 840 | January 26, 2016 |