# \#qp

**URL:** https://forums.developer.nvidia.com/tag/qp/620.md

[Latest](https://forums.developer.nvidia.com/latest.md) · [Categories](https://forums.developer.nvidia.com/categories.md) · [Tags](https://forums.developer.nvidia.com/tags.md)

---

## [Solving QP in parallel](https://forums.developer.nvidia.com/t/solving-qp-in-parallel/292035)

<div class="topic-metadata">

**Author:** [@cgsro202](https://forums.developer.nvidia.com/u/cgsro202)\
**Replies:** 0\
**Last updated:** [May 7, 2024, 6:06am UTC](https://forums.developer.nvidia.com/t/solving-qp-in-parallel/292035 "2024-05-07T06:06:59Z")

</div>

Is there anyone who has solved QP in Isaac Gym before? I’ve been using OSQP (but only in single environment in Gazebo) but couldn’t find much information relating to using OSQP in multi environments in parallel. So I w…

---

## [we met an issue "CREATE\_QP(0x500) op\_mod(0x0) failed" when using MLX5 poll mode driver](https://forums.developer.nvidia.com/t/we-met-an-issue-create-qp-0x500-op-mod-0x0-failed-when-using-mlx5-poll-mode-driver/205941)

<div class="topic-metadata">

**Author:** [@ermao.zhang2](https://forums.developer.nvidia.com/u/ermao.zhang2)\
**Replies:** 1\
**Last updated:** [December 16, 2021, 11:16pm UTC](https://forums.developer.nvidia.com/t/we-met-an-issue-create-qp-0x500-op-mod-0x0-failed-when-using-mlx5-poll-mode-driver/205941 "2021-12-16T23:16:16Z")

</div>

by using linux command dmesg, get information, can you help to the root cause, thanks. \[ 4.734223\] mlx5\_core 0000:d8:00.0: mlx5\_cmd\_check:769:(pid 853): CREATE\_QP(0x500) op\_mod(0x0) failed, status bad parameter(0x3), sy…

---

## [Need help understanding RoCE packet receive using ConnectX-5 ethernet NIC (How does the firmware work?)](https://forums.developer.nvidia.com/t/need-help-understanding-roce-packet-receive-using-connectx-5-ethernet-nic-how-does-the-firmware-work/206020)

<div class="topic-metadata">

**Author:** [@glen.fujimori](https://forums.developer.nvidia.com/u/glen.fujimori)\
**Replies:** 3\
**Last updated:** [November 11, 2021, 10:46am UTC](https://forums.developer.nvidia.com/t/need-help-understanding-roce-packet-receive-using-connectx-5-ethernet-nic-how-does-the-firmware-work/206020 "2021-11-11T10:46:55Z")

</div>

We are porting parts of the Mellanox OFED stack using the Ubuntu 18.04 version 5.1-2.5.8.0 release to another OS using the ConnectX-5 ethernet NIC. We have the following question: How does the NIC firmware direct a RoCE …

---

## [using RDMA raw ethernet with SRQ](https://forums.developer.nvidia.com/t/using-rdma-raw-ethernet-with-srq/206172)

<div class="topic-metadata">

**Author:** [@liusandrew](https://forums.developer.nvidia.com/u/liusandrew)\
**Replies:** 1\
**Last updated:** [March 22, 2021, 10:15am UTC](https://forums.developer.nvidia.com/t/using-rdma-raw-ethernet-with-srq/206172 "2021-03-22T10:15:53Z")

</div>

Dear support team, I tried to use SRQ (shared receive queue) with RDMA raw ethernet, while initial test shows failed using the linux tool, such as example in https://community.mellanox.com/s/article/raw-ethernet-lat as …

---

## [Issue with ConnextX-6 SP in Dell R6525 (AMD EPYC 7542/7742)](https://forums.developer.nvidia.com/t/issue-with-connextx-6-sp-in-dell-r6525-amd-epyc-7542-7742/206441)

<div class="topic-metadata">

**Author:** [@system](https://forums.developer.nvidia.com/u/system)\
**Replies:** 2\
**Last updated:** [May 19, 2020, 4:19pm UTC](https://forums.developer.nvidia.com/t/issue-with-connextx-6-sp-in-dell-r6525-amd-epyc-7542-7742/206441 "2020-05-19T16:19:07Z")

</div>

Hello Community, Running an MPI application on Dell R6525 servers with ConnextX-6 SP OEM cards, I see MPI error messages like: test: Rank 0:311: MPI\_Init: ibv\_modify\_qp(rst2init) failed test: Rank 0:311: MPI\_Init: ibv…

---

## [In the "Raw Ethernet Programming: Basic Introduction - Code Example" post, when trying to run the receiver code, it fails when trying to create the qp. "I get Couldn't create RSS QP" and the code exits. Any thoughts on what might be wrong?  Thanks.](https://forums.developer.nvidia.com/t/in-the-raw-ethernet-programming-basic-introduction-code-example-post-when-trying-to-run-the-receiver-code-it-fails-when-trying-to-create-the-qp-i-get-couldnt-create-rss-qp-and-the-code-exits-any-thoughts-on-what-might-be-wrong-thanks/206510)

<div class="topic-metadata">

**Author:** [@toole](https://forums.developer.nvidia.com/u/toole)\
**Replies:** 1\
**Last updated:** [March 4, 2020, 9:52pm UTC](https://forums.developer.nvidia.com/t/in-the-raw-ethernet-programming-basic-introduction-code-example-post-when-trying-to-run-the-receiver-code-it-fails-when-trying-to-create-the-qp-i-get-couldnt-create-rss-qp-and-the-code-exits-any-thoughts-on-what-might-be-wrong-thanks/206510 "2020-03-04T21:52:59Z")

</div>

I am trying to to run this on a computer that has four MCX515A-CCAT installed. Each NIC is connected, point-to-point, with another computer. In the past, I’ve successfully transferred data between the two computers using…

---

## [What is causing rx\_discards\_phy to occasionally increase?](https://forums.developer.nvidia.com/t/what-is-causing-rx-discards-phy-to-occasionally-increase/206649)

<div class="topic-metadata">

**Author:** [@system](https://forums.developer.nvidia.com/u/system)\
**Replies:** 4\
**Last updated:** [November 11, 2019, 12:23pm UTC](https://forums.developer.nvidia.com/t/what-is-causing-rx-discards-phy-to-occasionally-increase/206649 "2019-11-11T12:23:04Z")

</div>

I’ve written an application that receives UDP multicast data from the network, copies it to a GPU, copies results back and transmits them over the network (again with UDP multicast). The application uses raw ethernet ver…

---

## [FPGA to GPUDIRECT RDMA via UDP packets](https://forums.developer.nvidia.com/t/fpga-to-gpudirect-rdma-via-udp-packets/206865)

<div class="topic-metadata">

**Author:** [@system](https://forums.developer.nvidia.com/u/system)\
**Replies:** 1\
**Last updated:** [April 16, 2019, 4:45pm UTC](https://forums.developer.nvidia.com/t/fpga-to-gpudirect-rdma-via-udp-packets/206865 "2019-04-16T16:45:38Z")

</div>

Hi, I’m fairly new to RDMA and have a situation where I’m attempting to send UDP packets from an FPGA via 40gigE and be able to place them directly into GPU memory via a Mellanox Connectx5 card. My goal is to not have t…

---

## [ib\_send\_bw test with ConnectX-3 VPI adapter card over XenServer 6.2 fails with message: Failed to modify QP 100 to RTR](https://forums.developer.nvidia.com/t/ib-send-bw-test-with-connectx-3-vpi-adapter-card-over-xenserver-6-2-fails-with-message-failed-to-modify-qp-100-to-rtr/206984)

<div class="topic-metadata">

**Author:** [@javi3388](https://forums.developer.nvidia.com/u/javi3388)\
**Replies:** 2\
**Last updated:** [December 10, 2018, 4:16pm UTC](https://forums.developer.nvidia.com/t/ib-send-bw-test-with-connectx-3-vpi-adapter-card-over-xenserver-6-2-fails-with-message-failed-to-modify-qp-100-to-rtr/206984 "2018-12-10T16:16:44Z")

</div>

Hi all, we are testing a ConnectX-3 card with XenServer 6.2. For that, we have two nodes, the first node has XenServer 6.2 dom0 and the second node has CentOS 6.4. In both nodes we have installed the MLNX\_OFED version 2…

---

## [mellanox connectX3 adapter failed to reach the rational speed](https://forums.developer.nvidia.com/t/mellanox-connectx3-adapter-failed-to-reach-the-rational-speed/207282)

<div class="topic-metadata">

**Author:** [@system](https://forums.developer.nvidia.com/u/system)\
**Replies:** 1\
**Last updated:** [December 22, 2017, 6:44am UTC](https://forums.developer.nvidia.com/t/mellanox-connectx3-adapter-failed-to-reach-the-rational-speed/207282 "2017-12-22T06:44:53Z")

</div>

Hello, We are using the mellanox connectx3 adapter(Link Speed:40Gps) on windows10 PCs. We also use the proper infiniband cable for this kind of adapter which can provide the rational infiniband speed . However, we stil…

---

## [40Gb/s IPoIB only gives 5Gb/s real throughput?!](https://forums.developer.nvidia.com/t/40gb-s-ipoib-only-gives-5gb-s-real-throughput/207645)

<div class="topic-metadata">

**Author:** [@daniel.infuehr](https://forums.developer.nvidia.com/u/daniel.infuehr)\
**Replies:** 9\
**Last updated:** [December 8, 2016, 4:35am UTC](https://forums.developer.nvidia.com/t/40gb-s-ipoib-only-gives-5gb-s-real-throughput/207645 "2016-12-08T04:35:57Z")

</div>

I really need some expertise here: For the current situation see update 2 below. Update: I tested with Windows 2012 Clients to verify and I still get about 5.5 Gbit/s max. Maybe someone has other 40Gbit adapters what …

---

## [SX6036 IPoIB speed issue](https://forums.developer.nvidia.com/t/sx6036-ipoib-speed-issue/207648)

<div class="topic-metadata">

**Author:** [@zbruce-merrie](https://forums.developer.nvidia.com/u/zbruce-merrie)\
**Replies:** 2\
**Last updated:** [November 3, 2016, 10:29am UTC](https://forums.developer.nvidia.com/t/sx6036-ipoib-speed-issue/207648 "2016-11-03T10:29:54Z")

</div>

Hi, I was hoping that someone would be able to help me. I have 15 HP DL380 gen9 servers running Windows Server 2012 R2 each with dual port HP Connect-X3 VPI cards connected to a Mellanox SX6036 switch. The line speed …

---

## [ConnectX-2 IPoIB Performance Help](https://forums.developer.nvidia.com/t/connectx-2-ipoib-performance-help/207647)

<div class="topic-metadata">

**Author:** [@daniel.infuehr](https://forums.developer.nvidia.com/u/daniel.infuehr)\
**Replies:** 1\
**Last updated:** [October 13, 2016, 5:22pm UTC](https://forums.developer.nvidia.com/t/connectx-2-ipoib-performance-help/207647 "2016-10-13T17:22:57Z")

</div>

I really need some expertise here: I have two Windows 10 Machines with two MHQH19B-XTR 40 Gbit Adapters and a QSFP cable in between. The Vlan manager is opensm. The connection should be about 32Gbits Lan. In reality i …
