# \#tx

**URL:** https://forums.developer.nvidia.com/tag/tx/619.md

[Latest](https://forums.developer.nvidia.com/latest.md) · [Categories](https://forums.developer.nvidia.com/categories.md) · [Tags](https://forums.developer.nvidia.com/tags.md)

---

## [Jetson nano- RS485 communication- to control Servo (RSBL85-12 from Waveshare)](https://forums.developer.nvidia.com/t/jetson-nano-rs485-communication-to-control-servo-rsbl85-12-from-waveshare/343339)

<div class="topic-metadata">

**Author:** [@sankalp\_TL](https://forums.developer.nvidia.com/u/sankalp_TL)\
**Replies:** 3\
**Last updated:** [August 29, 2025, 6:05am UTC](https://forums.developer.nvidia.com/t/jetson-nano-rs485-communication-to-control-servo-rsbl85-12-from-waveshare/343339 "2025-08-29T06:05:31Z")

</div>

I am trying to interface Waveshare RSBL85-12 servo with jetson nano directly through SP3485 (MAX485). I have attached hardware connections and simple code with which I am trying to ping the servo. I am unable to ping s…

---

## [No RX with VLAN filter offload](https://forums.developer.nvidia.com/t/no-rx-with-vlan-filter-offload/230994)

<div class="topic-metadata">

**Author:** [@rickieasr](https://forums.developer.nvidia.com/u/rickieasr)\
**Replies:** 2\
**Last updated:** [November 4, 2022, 3:33pm UTC](https://forums.developer.nvidia.com/t/no-rx-with-vlan-filter-offload/230994 "2022-11-04T15:33:50Z")

</div>

Hello, DPDK: 19.11 Driver: mlx5 OS: CentOS Linux release 7.9.2009 (Kernel: 3.10.0-1160.66.1.el7.x86\_64) Iface: Mellanox Technologies MT27710 Family \[ConnectX-4 Lx Virtual Function\] I am bringing-up our dpdk based L3…

---

## [DCQCN config with CX6](https://forums.developer.nvidia.com/t/dcqcn-config-with-cx6/205947)

<div class="topic-metadata">

**Author:** [@susingh](https://forums.developer.nvidia.com/u/susingh)\
**Replies:** 2\
**Last updated:** [September 5, 2022, 6:55am UTC](https://forums.developer.nvidia.com/t/dcqcn-config-with-cx6/205947 "2022-09-05T06:55:34Z")

</div>

Is OFED driver required for dcqcn or can it be enabled with Inbox driver as well? What are the commands to set DCQCN with these 2 drivers? What is the difference between ROCE\_CC\_PRIO\_MASK\_P1 & ROCE\_CC\_PRIO\_MASK\_P2? If P…

---

## [What are secondary CPUs in TX2i?](https://forums.developer.nvidia.com/t/what-are-secondary-cpus-in-tx2i/226355)

<div class="topic-metadata">

**Author:** [@mahmood.nby78](https://forums.developer.nvidia.com/u/mahmood.nby78)\
**Replies:** 0\
**Last updated:** [August 29, 2022, 10:08am UTC](https://forums.developer.nvidia.com/t/what-are-secondary-cpus-in-tx2i/226355 "2022-08-29T10:08:52Z")

</div>

Hi What is the “Secondary CPUs”? and What does happen if i enable them? I read it in “Related Tools and Teqniques” in NVIDIA Jetson Linux Developer Guide

---

## [RSS doesn't work for Mellanox ConnectX-6 DX](https://forums.developer.nvidia.com/t/rss-doesnt-work-for-mellanox-connectx-6-dx/205940)

<div class="topic-metadata">

**Author:** [@tmartiro](https://forums.developer.nvidia.com/u/tmartiro)\
**Replies:** 2\
**Last updated:** [December 13, 2021, 11:48am UTC](https://forums.developer.nvidia.com/t/rss-doesnt-work-for-mellanox-connectx-6-dx/205940 "2021-12-13T11:48:56Z")

</div>

Hi, While testing dpdk(v19.11.10) application we noticed that nic card didn’t update mbuf.hash.rss value despite the fact that rxmode.mq\_mode = ETH\_MQ\_RX\_RSS\_FLAG was set. Is there any other way to enable RSS on the ca…

---

## [We have a few servers with MCX623106AS-CDAT Ethernet 100Gb 2-port QSFP56 cards.
Is there any published performance baseline for these cards? What am I supposed to see if I run a raw\_ethernet\_bw test between 2 of these?](https://forums.developer.nvidia.com/t/we-have-a-few-servers-with-mcx623106as-cdat-ethernet-100gb-2-port-qsfp56-cards-is-there-any-published-performance-baseline-for-these-cards-what-am-i-supposed-to-see-if-i-run-a-raw-ethernet-bw-test-between-2-of-these/206033)

<div class="topic-metadata">

**Author:** [@paolo.prinsecchi](https://forums.developer.nvidia.com/u/paolo.prinsecchi)\
**Replies:** 3\
**Last updated:** [September 14, 2021, 1:30am UTC](https://forums.developer.nvidia.com/t/we-have-a-few-servers-with-mcx623106as-cdat-ethernet-100gb-2-port-qsfp56-cards-is-there-any-published-performance-baseline-for-these-cards-what-am-i-supposed-to-see-if-i-run-a-raw-ethernet-bw-test-between-2-of-these/206033 "2021-09-14T01:30:50Z")

</div>

This is what I see, testing on 2 new HP dl385G10Plus v servers, with latest generation Epyc CPUs. One Arista 7800 switch between them. Ubuntu 20.04.1 , kernel 5.4.0-81-generic server: raw\_ethernet\_bw --server -d mlx5\_0…

---

## [We have a Mellanox Technologies MT27630 Family and Mellanox Technologies MT27710 Family cards that has pre-set maximums RX 64 and TX 8192, is it possible to have the RX value increased?](https://forums.developer.nvidia.com/t/we-have-a-mellanox-technologies-mt27630-family-and-mellanox-technologies-mt27710-family-cards-that-has-pre-set-maximums-rx-64-and-tx-8192-is-it-possible-to-have-the-rx-value-increased/206129)

<div class="topic-metadata">

**Author:** [@apanaglima](https://forums.developer.nvidia.com/u/apanaglima)\
**Replies:** 3\
**Last updated:** [August 31, 2021, 11:53am UTC](https://forums.developer.nvidia.com/t/we-have-a-mellanox-technologies-mt27630-family-and-mellanox-technologies-mt27710-family-cards-that-has-pre-set-maximums-rx-64-and-tx-8192-is-it-possible-to-have-the-rx-value-increased/206129 "2021-08-31T11:53:33Z")

</div>

\[me~\]$ ethtool -g eth4 Ring parameters for eth4: Pre-set maximums: RX: 64 RX Mini: 0 RX Jumbo: 0 TX: 8192 Current hardware settings: RX: 64 RX Mini: 0 1RX Jumbo: 0 TX: 8192

---

## [ConnectX-4 RX performance issues on DPDK](https://forums.developer.nvidia.com/t/connectx-4-rx-performance-issues-on-dpdk/207245)

<div class="topic-metadata">

**Author:** [@pawel.malachowski](https://forums.developer.nvidia.com/u/pawel.malachowski)\
**Replies:** 2\
**Last updated:** [March 25, 2021, 7:03am UTC](https://forums.developer.nvidia.com/t/connectx-4-rx-performance-issues-on-dpdk/207245 "2021-03-25T07:03:27Z")

</div>

Are there any RX-side pps performance tips for ConnectX-4/PMD mlx5 family? Our usecase requires optimising RX pps, I don’t care about TX. Adding more receiving lcores actually decreases RX performance. After applying p…

---

## [OVS-DPDK Offloading VXLAN，run testpmd on VM，Tx-pps can reach 8.9Mpps, but Rx-pps only 0.7Mpps](https://forums.developer.nvidia.com/t/ovs-dpdk-offloading-vxlan-run-testpmd-on-vm-tx-pps-can-reach-8-9mpps-but-rx-pps-only-0-7mpps/206283)

<div class="topic-metadata">

**Author:** [@3416826871](https://forums.developer.nvidia.com/u/3416826871)\
**Replies:** 5\
**Last updated:** [November 9, 2020, 8:19pm UTC](https://forums.developer.nvidia.com/t/ovs-dpdk-offloading-vxlan-run-testpmd-on-vm-tx-pps-can-reach-8-9mpps-but-rx-pps-only-0-7mpps/206283 "2020-11-09T20:19:50Z")

</div>

Hello, i following the docs “OVS-DPDK Hardware Offloads”, change my bluefield to smartnic mode and offloading vxlan on nic. After that, i can ping from a VM(bluefield pf1vf0) on the 1st host to a VM(intel 82599) on the 2…

---

## [ib\_send\_bw failing on CX5 port.](https://forums.developer.nvidia.com/t/ib-send-bw-failing-on-cx5-port/206426)

<div class="topic-metadata">

**Author:** [@rajput.sanchi65](https://forums.developer.nvidia.com/u/rajput.sanchi65)\
**Replies:** 2\
**Last updated:** [June 9, 2020, 5:18am UTC](https://forums.developer.nvidia.com/t/ib-send-bw-failing-on-cx5-port/206426 "2020-06-09T05:18:50Z")

</div>

I am trying to data transfer between two CX5 ports usinf ib\_write\_bw. but it is failing. \[root@ctech123 64\]# ibdev2netdev mlx5\_0 port 1 ==\> enp94s0f0 (Up) mlx5\_1 port 1 ==\> enp94s0f1 (Up) \[root@ctech123 64\]# mlx5\_0 …

---

## [Can SOFTROCE on a client send message to ROCE on a server(not mlx5 card, it's a roce card from another company) by using ib\_send\_bw?](https://forums.developer.nvidia.com/t/can-softroce-on-a-client-send-message-to-roce-on-a-server-not-mlx5-card-its-a-roce-card-from-another-company-by-using-ib-send-bw/206663)

<div class="topic-metadata">

**Author:** [@1692492213](https://forums.developer.nvidia.com/u/1692492213)\
**Replies:** 1\
**Last updated:** [November 14, 2019, 1:24am UTC](https://forums.developer.nvidia.com/t/can-softroce-on-a-client-send-message-to-roce-on-a-server-not-mlx5-card-its-a-roce-card-from-another-company-by-using-ib-send-bw/206663 "2019-11-14T01:24:40Z")

</div>

We try to let SOFTROCE on a client send message to ROCE on a server(not mlx5 card, it’s a roce card from another company) by using ib\_send\_bw. But it fails, the error message is: Send BW Test Dual-port : OFF Device : …

---

## [How to set RX/TX/Combined channels on ConnectX-5 MT27800 Controller card SRIOV VF??](https://forums.developer.nvidia.com/t/how-to-set-rx-tx-combined-channels-on-connectx-5-mt27800-controller-card-sriov-vf/206666)

<div class="topic-metadata">

**Author:** [@raghavendrachari\_k](https://forums.developer.nvidia.com/u/raghavendrachari_k)\
**Replies:** 2\
**Last updated:** [November 1, 2019, 6:49am UTC](https://forums.developer.nvidia.com/t/how-to-set-rx-tx-combined-channels-on-connectx-5-mt27800-controller-card-sriov-vf/206666 "2019-11-01T06:49:32Z")

</div>

Am not able to set Combined channels for a SRIOV VF on ConnectX-5 MT27800 Controller card. For a PF it is showing as shown below as : ethtool -l p4p1 Channel parameters for p4p1: Pre-set maximums: RX: 0 TX: 0 Othe…

---

## [ib\_send\_bw ignores '-d 'option on client side,why?](https://forums.developer.nvidia.com/t/ib-send-bw-ignores-d-option-on-client-side-why/206955)

<div class="topic-metadata">

**Author:** [@jianguo72](https://forums.developer.nvidia.com/u/jianguo72)\
**Replies:** 1\
**Last updated:** [December 23, 2018, 1:10pm UTC](https://forums.developer.nvidia.com/t/ib-send-bw-ignores-d-option-on-client-side-why/206955 "2018-12-23T13:10:33Z")

</div>

I used ‘-d’ to indicate the devices to send RDMA traffic to server, but ib\_send\_bw either ignores this option to use another device: for example, here I want to use dev mlx5\_0, but ib\_send\_bw choose mlx5\_1. is it an is…

---

## [ib\_send\_bw test with ConnectX-3 VPI adapter card over XenServer 6.2 fails with message: Failed to modify QP 100 to RTR](https://forums.developer.nvidia.com/t/ib-send-bw-test-with-connectx-3-vpi-adapter-card-over-xenserver-6-2-fails-with-message-failed-to-modify-qp-100-to-rtr/206984)

<div class="topic-metadata">

**Author:** [@javi3388](https://forums.developer.nvidia.com/u/javi3388)\
**Replies:** 2\
**Last updated:** [December 10, 2018, 4:16pm UTC](https://forums.developer.nvidia.com/t/ib-send-bw-test-with-connectx-3-vpi-adapter-card-over-xenserver-6-2-fails-with-message-failed-to-modify-qp-100-to-rtr/206984 "2018-12-10T16:16:44Z")

</div>

Hi all, we are testing a ConnectX-3 card with XenServer 6.2. For that, we have two nodes, the first node has XenServer 6.2 dom0 and the second node has CentOS 6.4. In both nodes we have installed the MLNX\_OFED version 2…
