[0000.055] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.063] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.068] I> Boot-mode: Coldboot [0000.071] I> Platform: Silicon [0000.074] I> Chip revision : A02P [0000.077] I> Bootrom patch version : 15 (correctly patched) [0000.082] I> ATE fuse revision : 0x200 [0000.086] I> Ram repair fuse : 0x0 [0000.089] I> Ram Code : 0x2 [0000.091] I> rst_source: 0x0, rst_level: 0x0 [0000.096] I> Boot-device: SDMMC (instance: 3) [0000.112] I> sdmmc DDR50 mode [0000.116] I> Boot chain mechanism: A/B [0000.120] I> Current Boot-Chain Slot: 0 [0000.123] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.130] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.137] I> Temperature = 44500 [0000.140] W> Skipping boost for clk: BPMP_CPU_NIC [0000.144] W> Skipping boost for clk: BPMP_APB [0000.148] W> Skipping boost for clk: AXI_CBB [0000.152] W> Skipping boost for clk: AON_CPU_NIC [0000.157] W> Skipping boost for clk: CAN1 [0000.160] W> Skipping boost for clk: CAN2 [0000.165] I> Boot-device: SDMMC (instance: 3) [0000.174] I> Sdmmc: HS400 mode enabled [0000.178] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.185] W> Thermal config not found in BCT [0000.193] W> MEMIO rail config not found in BCT [0000.215] I> sdmmc bdev is already initialized [0000.260] W> Platform config not found in BCT [0000.294] I> MB1 done ����main enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init �� [0000.303] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.304] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.304] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.305] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.311] W> device prod register failed [0000.314] I> gpio framework initialized [0000.318] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.325] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.333] I> No valid sdcard_params in mb1_bct [0000.337] I> Boot_device: SDMMC_BOOT instance: 3 [0000.342] I> sdmmc-3 params source = boot args [0000.351] I> sdmmc-3 params source = boot args [0000.351] I> sdmmc bdev is already initialized [0000.384] I> Found 20 partitions in SDMMC_BOOT (instance 3) [0000.400] I> Found 41 partitions in SDMMC_USER (instance 3) [0000.401] I> Active Boot chain : 0 [0000.459] I> Relocating BR-BCT [0000.461] > DEVICE_PROD: device prod is not initialized. [0000.486] E> I2C: slave not found in slaves. [0000.487] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true. [0000.488] E> I2C_DEV: Failed to send register address 0x00000000. [0000.489] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 0. [0000.490] E> eeprom: Failed to read I2C slave device [0000.493] I> Failed to read CVB eeprom data @ AE [0000.497] I> Retrying CVB eeprom read @ AC ... [0000.502] E> I2C: slave not found in slaves. [0000.506] E> I2C: Could not write 0 bytes to slave: 0x00ac with repeat start true. [0000.514] E> I2C_DEV: Failed to send register address 0x00000000. [0000.520] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xac at 0x00000000 via instance 0. [0000.529] E> eeprom: Failed to read I2C slave device [0000.534] I> Failed to read CVB eeprom data @ AC [0000.584] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0000.585] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0000.585] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0000.585] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0000.586] I> [3] START: 0xca000000, SIZE: 0x800000 [0000.586] I> dram_block larger than 80000000 [0000.589] I> [4] START: 0x100000000, SIZE: 0x780000000 [0000.600] I> Setting NS memory ranges to OP-TEE dtb finished. [0000.614] I> found decompressor handler: lz4 [0001.110] I> EKB detected (length: 0x410) @ VA:0x526ff400 [0001.111] I> Setting EKB blob info to OPTEE dtb finished. ��NOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: �� ��I/TC: Non-secure external DT found ��bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 clk_early initialized mail_early initialized fuse initialized hwwdt initialized t194_ec_get_ec_list: found 45 ecs ec initialized vmon_setup_monitors: found 3 monitors vmon initialized adc initialized fmon_populate_monitors: found 73 monitors fmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized ��I/TC: OP-TEE version: 3.16 (gcc versio��avfs_clk_platform initialized ��n 9.3.0 (Bu��soctherm initialized ��il��aotag initialized ��dr��powergate initialized ��oot 2020.08)) #2 Thu Aug 11 03:23:20 UTC 2022 aarch64 I/TC: WARNING: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/ar��dvs initialized ��c��pm initialized ��hi��suspend initialized ��tec��pg_late initialized ��tu��pg_mrq_init initialized strap initialized ��r��nvl initialized ��e/porting_��emc initialized emc_mrq initialized ��guidelines.html I/TC: Primary CPU initializing ��clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized clk_dt_late initialized noc_late initialized pm_post initialized dbells initialized dmce initialized cvc initialized avfs_clk_mach_post initialized avfs_clk_platform_post initialized cvc_late initialized regulator_post initialized rm initialized console_late initialized clk_dt_post initialized mc_reg initialized pg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ��I/TC: Primary CPU switching to normal world boot �� [0001.762] I> Welcome to NVDisp-Init [0001.763] I> NVDisp-Init version: t194-f9ecfedc [0001.763] I> CPU-BL Params @ 0xca020000 [0001.763] I> 0) Base:0x00000000 Size:0x00000000 [0001.764] I> 1) Base:0xc8300000 Size:0x00100000 [0001.764] I> 2) Base:0xc9800000 Size:0x00200000 [0001.764] I> 3) Base:0xc8600000 Size:0x00200000 [0001.767] I> 4) Base:0xc8200000 Size:0x00100000 [0001.771] I> 5) Base:0xc8100000 Size:0x00100000 [0001.776] I> 6) Base:0xc9400000 Size:0x00400000 [0001.780] I> 7) Base:0xc9000000 Size:0x00400000 [0001.785] I> 8) Base:0xc8000000 Size:0x00100000 [0001.789] I> 9) Base:0xc7f00000 Size:0x00100000 [0001.794] I> 10) Base:0xca800000 Size:0x00800000 [0001.798] I> 11) Base:0x40000000 Size:0x00040000 [0001.802] I> 12) Base:0xc7e00000 Size:0x00100000 [0001.807] I> 13) Base:0x40046000 Size:0x00002000 [0001.811] I> 14) Base:0x40048000 Size:0x00002000 [0001.816] I> 15) Base:0xaf000000 Size:0x00004000 [0001.820] I> 16) Base:0x4004a000 Size:0x00002000 [0001.825] I> 17) Base:0xc7c00000 Size:0x00100000 [0001.829] I> 18) Base:0x4004c000 Size:0x00002000 [0001.834] I> 19) Base:0xc9a00000 Size:0x00600000 [0001.838] I> 20) Base:0x4004e000 Size:0x00002000 [0001.843] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0001.847] I> 22) Base:0x00000000 Size:0x00000000 [0001.852] I> 23) Base:0xc7de0000 Size:0x00020000 [0001.856] I> 24) Base:0xcc000000 Size:0x02000000 [0001.860] I> 25) Base:0x40050000 Size:0x00002000 [0001.865] I> 26) Base:0x40040000 Size:0x00006000 [0001.869] I> 27) Base:0xc8c00000 Size:0x00400000 [0001.874] I> 28) Base:0xc8400000 Size:0x00200000 [0001.878] I> 29) Base:0xc8800000 Size:0x00400000 [0001.883] I> 30) Base:0xc7dd0000 Size:0x00010000 [0001.887] I> 31) Base:0x00000000 Size:0x00000000 [0001.892] I> 32) Base:0xf8000000 Size:0x08000000 [0001.896] I> 33) Base:0xce000000 Size:0x2a000000 [0001.901] I> 34) Base:0xcb000000 Size:0x01000000 [0001.905] I> 35) Base:0xae000000 Size:0x01000000 [0001.910] I> 36) Base:0xa0000000 Size:0x0e000000 [0001.914] I> 37) Base:0xca000000 Size:0x00800000 [0001.919] I> 38) Base:0x80000000 Size:0x20000000 [0001.923] I> 39) Base:0xb0000000 Size:0x08000000 [0001.927] I> 40) Base:0x00000000 Size:0x00000000 [0001.932] I> 41) Base:0x00000000 Size:0x00000000 [0001.936] I> 42) Base:0x00000000 Size:0x00000000 [0001.941] I> 43) Base:0x00000000 Size:0x00000000 [0001.945] I> 44) Base:0x00000000 Size:0x00000000 [0001.950] I> 45) Base:0x00000000 Size:0x00000000 [0001.954] GIC-SPI Target CPU: 0 [0001.957] Interrupts Init done [0001.960] calling constructors [0001.963] initializing heap [0001.966] I> Heap: [0xa0960000 ... 0xadf00000] [0001.970] initializing threads [0001.973] initializing timers [0001.976] creating bootstrap completion thread [0001.980] top of bootstrap2() [0001.983] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0001.987] initializing platform [0001.990] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0001.996] W> device prod register failed [0001.999] I> Bl_dtb @0xadf00000 [0002.002] I> gpio framework initialized [0002.010] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0002.016] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0002.023] I> fixed regulator driver initialized [0002.032] I> register 'maxim' power off handle [0002.034] I> virtual i2c enabled [0002.034] I> registered 'maxim,max20024' pmic [0002.038] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0002.044] I> Boot-device: eMMC [0002.047] I> Boot_device: SDMMC_BOOT instance: 3 [0002.053] I> sdmmc-3 params source = boot args [0002.056] W> No board IDs available [0002.059] E> Failed to get board id info! [0002.063] I> sdmmc bdev is already initialized [0002.067] I> sdmmc-3 params source = boot args [0002.073] I> Found 20 partitions in SDMMC_BOOT (instance 3) [0002.079] I> Found 41 partitions in SDMMC_USER (instance 3) [0002.089] E> no regulator info present for avdd_hdmi-supply [0002.090] E> tegrabl_display_get_pdata, failed to parse dtb settings [0002.097] E> no regulator info present for avdd_hdmi-supply [0002.099] E> tegrabl_display_get_pdata, failed to parse dtb settings [0002.106] E> cannot find any other nvdisp nodes [0002.110] E> no valid display unit config found in dtb [0002.117] W> display init failed [0002.118] initializing target [0002.121] calling apps_init() [0002.123] starting app kernel_boot_app [0002.127] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) Press ESCAPE for boot options ** WARNING: Test Key is used. ** ...... L4TLauncher: Attempting Recovery Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (root@swdev3) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Tue Sep 27 13:03:34 EDT 2022 [ 0.000000] Machine model: Jetson-AGX [ 0.000000] earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '') [ 0.000000] printk: bootconsole [tegra_comb_uart0] enabled [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x85a007718 SMBIOS=0xc7db0000 SMBIOS 3.0=0x87c5d0000 MEMATTR=0x8597c1018 ESRT=0x858902218 RNG=0x87c616f18 MEMRESERVE=0x8597cdf18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x0000000858902218 to 0x0000000858902250. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000087fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000085815ffff] [ 0.000000] node 0: [mem 0x0000000858160000-0x000000085817ffff] [ 0.000000] node 0: [mem 0x0000000858180000-0x000000085847efff] [ 0.000000] node 0: [mem 0x000000085847f000-0x0000000858661fff] [ 0.000000] node 0: [mem 0x0000000858662000-0x00000008588affff] [ 0.000000] node 0: [mem 0x00000008588b0000-0x00000008588bffff] [ 0.000000] node 0: [mem 0x00000008588c0000-0x000000085927ffff] [ 0.000000] node 0: [mem 0x0000000859280000-0x000000085945ffff] [ 0.000000] node 0: [mem 0x0000000859460000-0x00000008594affff] [ 0.000000] node 0: [mem 0x00000008594b0000-0x00000008595bffff] [ 0.000000] node 0: [mem 0x00000008595c0000-0x00000008595dffff] [ 0.000000] node 0: [mem 0x00000008595e0000-0x00000008596cffff] [ 0.000000] node 0: [mem 0x00000008596d0000-0x000000085975ffff] [ 0.000000] node 0: [mem 0x0000000859760000-0x000000085978ffff] [ 0.000000] node 0: [mem 0x0000000859790000-0x00000008597cffff] [ 0.000000] node 0: [mem 0x00000008597d0000-0x00000008599cffff] [ 0.000000] node 0: [mem 0x00000008599d0000-0x00000008599fffff] [ 0.000000] node 0: [mem 0x0000000859a00000-0x0000000859a4ffff] [ 0.000000] node 0: [mem 0x0000000859a50000-0x0000000859f1ffff] [ 0.000000] node 0: [mem 0x0000000859f20000-0x0000000859f4ffff] [ 0.000000] node 0: [mem 0x0000000859f50000-0x0000000859f7ffff] [ 0.000000] node 0: [mem 0x0000000859f80000-0x0000000859fcffff] [ 0.000000] node 0: [mem 0x0000000859fd0000-0x0000000859fdffff] [ 0.000000] node 0: [mem 0x0000000859fe0000-0x0000000859ffffff] [ 0.000000] node 0: [mem 0x000000085a000000-0x000000085a24ffff] [ 0.000000] node 0: [mem 0x000000085a250000-0x000000085a2effff] [ 0.000000] node 0: [mem 0x000000085a2f0000-0x000000085a39ffff] [ 0.000000] node 0: [mem 0x000000085a3a0000-0x000000085a43ffff] [ 0.000000] node 0: [mem 0x000000085a440000-0x000000085a4cffff] [ 0.000000] node 0: [mem 0x000000085a4d0000-0x000000085a56ffff] [ 0.000000] node 0: [mem 0x000000085a570000-0x000000085ae3ffff] [ 0.000000] node 0: [mem 0x000000085ae40000-0x000000085b01ffff] [ 0.000000] node 0: [mem 0x000000085b020000-0x000000087c5cffff] [ 0.000000] node 0: [mem 0x000000087c5d0000-0x000000087c61ffff] [ 0.000000] node 0: [mem 0x000000087c620000-0x000000087fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000087fffffff] [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 8032421 [ 0.000000] Kernel command line: root=/dev/initrd rw rootwait console=ttyTCU0,115200n8 fbcon=map:0 net.ifnames=0 video=tegrafb no_console_suspend=1 earlycon=tegra_comb_uart,mmio32,0x0c168000 sdhci_te [ 0.000000] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) [ 0.000000] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 31674640K/32639680K available (18112K kernel code, 3170K rwdata, 7124K rodata, 3968K init, 1093K bss, 899504K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x34/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000008] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.008533] Console: colour dummy device 80x25 [ 0.012359] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.022485] pid_max: default: 32768 minimum: 301 [ 0.027203] LSM: Security Framework initializing [ 0.031792] Yama: becoming mindful. [ 0.035440] SELinux: Initializing. [ 0.039186] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.046680] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.057966] rcu: Hierarchical SRCU implementation. [ 0.059696] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.067588] DTS File Name: tegra194-agx-cti-AGX101.dts [ 0.072213] DTB Build time: Oct 7 2022 10:09:12 [ 0.078186] Tegra Revision: A02 SKU: 0xd0 CPU Process: 0 SoC Process: 0 [ 0.084134] Remapping and enabling EFI services. [ 0.089884] smp: Bringing up secondary CPUs ... ��: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot I/TC: Secondary CPU 6 initializing I/TC: Secondary CPU 6 switching to normal world boot I/TC: Secondary CPU 7 initializing I/TC: Secondary CPU 7 switching to normal world boot ��[ 0.185935] Detected PIPT I-cache on CPU1 [ 0.186032] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.217092] Detected PIPT I-cache on CPU2 [ 0.217232] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.246617] Detected PIPT I-cache on CPU3 [ 0.246750] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.276291] Detected PIPT I-cache on CPU4 [ 0.276386] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.305987] Detected PIPT I-cache on CPU5 [ 0.306139] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.335742] Detected PIPT I-cache on CPU6 [ 0.335984] CPU6: Booted secondary processor 0x0000000300 [0x4e0f0040] [ 0.365716] Detected PIPT I-cache on CPU7 [ 0.365941] CPU7: Booted secondary processor 0x0000000301 [0x4e0f0040] [ 0.366302] smp: Brought up 1 node, 8 CPUs [ 0.368105] SMP: Total of 8 processors activated. [ 0.368477] CPU features: detected: Privileged Access Never [ 0.368857] CPU features: detected: LSE atomic instructions [ 0.369621] CPU features: detected: User Access Override [ 0.375157] CPU features: detected: 32-bit EL0 Support [ 0.380242] CPU features: detected: RAS Extension Support [ 0.385774] CPU features: detected: CRC32 instructions [ 0.390855] CPU features: detected: 32-bit EL1 Support [ 0.454391] CPU: All CPU(s) started at EL2 [ 0.462735] devtmpfs: initialized [ 0.480785] Registered cp15_barrier emulation handler [ 0.480986] Registered setend emulation handler [ 0.481071] KASLR enabled [ 0.481350] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.481515] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.482771] pinctrl core: initialized pinctrl subsystem [ 0.483675] SMBIOS 3.0.0 present. [ 0.483764] DMI: Unknown Jetson-AGX/Jetson-AGX, BIOS 1.0-d7fb19b 08/10/2022 [ 0.484556] NET: Registered protocol family 16 [ 0.486982] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations [ 0.488663] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.490329] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.490530] audit: initializing netlink subsys (disabled) [ 0.490832] audit: type=2000 audit(0.440:1): state=initialized audit_enabled=0 res=1 [ 0.491234] thermal_sys: Registered thermal governor 'step_wise' [ 0.491239] thermal_sys: Registered thermal governor 'power_allocator' [ 0.494331] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.502313] cpuidle: using governor menu [ 0.511316] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.518602] ASID allocator initialised with 32768 entries [ 0.523683] Serial: AMBA PL011 UART driver [ 0.529589] Tegra reboot handler registered. [ 0.576283] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.576532] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.576790] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.576960] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.577196] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.577379] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.577663] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.580028] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.587483] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.593852] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.602751] mc: mapped MMIO address: 0xffff800010ee0000 -> 0x2c10000 [ 0.607424] mc: mapped MMIO address: 0xffff800010f00000 -> 0x2c20000 [ 0.613882] mc: mapped MMIO address: 0xffff800010f20000 -> 0x2c30000 [ 0.620377] mc: mapped MMIO address: 0xffff800010f40000 -> 0x2c40000 [ 0.626830] mc: mapped MMIO address: 0xffff800010f60000 -> 0x2c50000 [ 0.633404] mc: mapped MMIO address: 0xffff800010f80000 -> 0x2b80000 [ 0.639701] mc: mapped MMIO address: 0xffff800010fa0000 -> 0x2b90000 [ 0.646426] mc: mapped MMIO address: 0xffff800010fc0000 -> 0x2ba0000 [ 0.653004] mc: mapped MMIO address: 0xffff800010fe0000 -> 0x2bb0000 [ 0.659465] mc: mapped MMIO address: 0xffff800011000000 -> 0x1700000 [ 0.665941] mc: mapped MMIO address: 0xffff800011020000 -> 0x1710000 [ 0.672153] mc: mapped MMIO address: 0xffff800011040000 -> 0x1720000 [ 0.678813] mc: mapped MMIO address: 0xffff800011060000 -> 0x1730000 [ 0.685188] mc: mapped MMIO address: 0xffff800011080000 -> 0x1740000 [ 0.691592] mc: mapped MMIO address: 0xffff8000110a0000 -> 0x1750000 [ 0.697951] mc: mapped MMIO address: 0xffff8000110c0000 -> 0x1760000 [ 0.704356] mc: mapped MMIO address: 0xffff8000110e0000 -> 0x1770000 [ 0.710561] mc-err: mcerr ops are set to t19x [ 0.726889] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.727022] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.728309] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.734958] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.747371] ACPI: Interpreter disabled. [ 0.748735] iommu: Default domain type: Translated [ 0.750477] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.756834] SCSI subsystem initialized [ 0.760351] usbcore: registered new interface driver usbfs [ 0.765641] usbcore: registered new interface driver hub [ 0.770704] usbcore: registered new device driver usb [ 0.776398] mc: Linux media interface: v0.10 [ 0.780408] videodev: Linux video capture interface: v2.00 [ 0.786193] pps_core: LinuxPPS API ver. 1 registered [ 0.790786] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.799886] PTP clock support registered [ 0.804346] Registered efivars operations [ 0.808310] FPGA manager framework [ 0.811220] Advanced Linux Sound Architecture Driver Initialized. [ 0.817977] Bluetooth: Core ver 2.22 [ 0.821075] NET: Registered protocol family 31 [ 0.825097] Bluetooth: HCI device and connection manager initialized [ 0.831731] Bluetooth: HCI socket layer initialized [ 0.836725] Bluetooth: L2CAP socket layer initialized [ 0.841807] Bluetooth: SCO socket layer initialized [ 0.847404] camchar: rtcpu character device driver loaded [ 0.852776] clocksource: Switched to clocksource arch_sys_counter [ 1.093539] VFS: Disk quotas dquot_6.6.0 [ 1.093660] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.094061] pnp: PnP ACPI: disabled [ 1.104578] la/ptsa driver initialized. [ 1.104775] NET: Registered protocol family 2 [ 1.105058] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 1.113337] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 1.113691] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 1.114571] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 1.115058] TCP: Hash tables configured (established 262144 bind 65536) [ 1.115294] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 1.115681] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 1.116177] NET: Registered protocol family 1 [ 1.117078] RPC: Registered named UNIX socket transport module. [ 1.117200] RPC: Registered udp transport module. [ 1.117279] RPC: Registered tcp transport module. [ 1.117394] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.117536] PCI: CLS 0 bytes, default 64 [ 1.117794] Trying to unpack rootfs image as initramfs... [ 1.366322] Freeing initrd memory: 13116K [ 1.370587] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.371040] kvm [1]: IPA Size Limit: 40 bits [ 1.371659] kvm [1]: vgic interrupt IRQ9 [ 1.372351] kvm [1]: VHE mode initialized successfully [ 1.373745] Initialise system trusted keyrings [ 1.374022] workingset: timestamp_bits=46 max_order=23 bucket_order=0 [ 1.379125] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.379908] NFS: Registering the id_resolver key type [ 1.380036] Key type id_resolver registered [ 1.380117] Key type id_legacy registered [ 1.380273] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.380409] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.380569] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.391285] NET: Registered protocol family 38 [ 1.391386] Key type asymmetric registered [ 1.391479] Asymmetric key parser 'x509' registered [ 1.391638] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.391959] io scheduler mq-deadline registered [ 1.392057] io scheduler kyber registered [ 1.397805] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.401166] scrncapt: init (heads:4 wins:6 planes:4) [ 1.401329] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.402016] EINJ: ACPI disabled. [ 1.403810] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.406802] tegra-pmc: ### PMC reset source: SYS_RESET_N [ 1.412112] tegra-pmc: ### PMC reset level: L0 [ 1.416486] tegra-pmc: ### PMC reset status reg: 0x0 [ 1.421503] tegra-pmc: PMC Prod config success [ 1.429251] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.433919] printk: console [ttyTCU0] enabled [ 1.433919] printk: console [ttyTCU0] enabled 1.440836] printk: bootconsole [tegra_comb_uart0] disabled [ 1.440836] printk: bootconsole [tegra_comb_uart0] disabled [ 1.452675] arm-smmu 10000000.iommu: probing hardware configuration... [ 1.458424] arm-smmu 10000000.iommu: SMMUv2 with: [ 1.463157] arm-smmu 10000000.iommu: stage 1 translation [ 1.468251] arm-smmu 10000000.iommu: stage 2 translation [ 1.473907] arm-smmu 10000000.iommu: nested translation [ 1.479175] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 1.486511] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 1.495955] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 1.499668] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 1.506104] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 1.513352] arm-smmu 12000000.iommu: probing hardware configuration... [ 1.518803] arm-smmu 12000000.iommu: SMMUv2 with: [ 1.523775] arm-smmu 12000000.iommu: stage 1 translation [ 1.529048] arm-smmu 12000000.iommu: stage 2 translation [ 1.534452] arm-smmu 12000000.iommu: nested translation [ 1.540138] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 1.547054] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 1.556504] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 1.560200] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 1.566739] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 1.574015] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 1.584217] tegra_profiler: version: 1.147, samples/io: 49/28 [ 1.587186] tegra_profiler: auth: init [ 1.591347] THERMAL EST: found 3 subdevs [ 1.594869] THERMAL EST num_resources: 0 [ 1.598708] [THERMAL EST subdev 0] [ 1.602268] [THERMAL EST subdev 1] [ 1.605672] [THERMAL EST subdev 2] [ 1.608643] THERMAL EST: Found 2 profiles, default profile is quiet [ 1.615346] THERMAL EST: thz register success. [ 1.619619] THERMAL EST: end of probe, return err: 0 [ 1.624559] nvsciipc: loaded module [ 1.630904] tun: Universal TUN/TAP device driver, 1.6 [ 1.634132] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 1.640692] hns3: Copyright (c) 2017 Huawei Corporation. [ 1.646243] e1000e: Intel(R) PRO/1000 Network Driver [ 1.651175] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.657254] igb: Intel(R) Gigabit Ethernet Network Driver [ 1.662290] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.668451] PPP generic driver version 2.4.2 [ 1.672700] PPP BSD Compression module registered [ 1.677264] PPP Deflate Compression module registered [ 1.682510] PPP MPPE Compression module registered [ 1.687560] usbcore: registered new interface driver r8152 [ 1.693032] usbcore: registered new interface driver asix [ 1.698616] usbcore: registered new interface driver ax88179_178a [ 1.704780] usbcore: registered new interface driver cdc_ether [ 1.710473] usbcore: registered new interface driver net1080 [ 1.716034] usbcore: registered new interface driver cdc_subset [ 1.722344] usbcore: registered new interface driver zaurus [ 1.728050] usbcore: registered new interface driver cdc_ncm [ 1.733493] usbcore: registered new interface driver aqc111 [ 1.739112] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.745472] ohci-pci: OHCI PCI platform driver [ 1.749482] ohci-platform: OHCI generic platform driver [ 1.755374] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 1.761496] usbcore: registered new interface driver uas [ 1.765755] usbcore: registered new interface driver usb-storage [ 1.772268] mousedev: PS/2 mouse device common for all mice [ 1.777506] usbcore: registered new interface driver xpad [ 1.785366] tegra_rtc c2a0000.rtc: registered as rtc1 [ 1.788300] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:19 UTC (19) [ 1.796045] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 1.802511] i2c /dev entries driver [ 1.805679] tegra-i2c 3160000.i2c: Adding to iommu group 1 [ 1.811498] tegra-i2c c240000.i2c: Adding to iommu group 1 [ 1.816933] tegra-i2c 3180000.i2c: Adding to iommu group 1 [ 1.822065] tegra-i2c 3190000.i2c: Adding to iommu group 1 [ 1.827542] tegra-i2c 31b0000.i2c: Adding to iommu group 1 [ 1.833169] tegra-i2c 31c0000.i2c: Adding to iommu group 1 [ 1.838639] tegra-i2c c250000.i2c: Adding to iommu group 1 [ 1.848358] device-mapper: uevent: version 1.0.3 [ 1.848682] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 1.858286] cpuidle: Initializing cpuidle driver [ 1.862701] sdhci: Secure Digital Host Controller Interface driver [ 1.867596] sdhci: Copyright(c) Pierre Ossman [ 1.871938] Synopsys Designware Multimedia Card Interface Driver [ 1.877900] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.884088] sdhci-tegra 3460000.sdhci: Adding to iommu group 2 [ 1.889860] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 1.889906] sdhci-tegra 3400000.sdhci: Adding to iommu group 3 [ 1.896865] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 1.923062] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x2 [ 1.931583] vdd-1v0: supplied by regulator-dummy [ 1.936969] vdd-1v8-hs: supplied by regulator-dummy [ 1.941671] vdd-1v8-ls: supplied by regulator-dummy [ 1.946307] vdd-1v8-ao: supplied by regulator-dummy [ 1.950127] vddio-ddr-1v1: supplied by regulator-dummy [ 1.954486] vdd-rtc: supplied by regulator-dummy [ 1.956046] spmic-ldo1: supplied by regulator-dummy [ 1.957168] vdd-ao-3v3: supplied by regulator-dummy [ 1.963216] vddio-emmc-3v3: supplied by regulator-dummy [ 1.969367] spmic-ldo4: supplied by regulator-dummy [ 1.970469] vdd-usb-3v3: supplied by regulator-dummy [ 1.976541] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 1.982554] vdd-csi-1v2: supplied by vdd-1v8-ls [ 1.988082] spmic-ldo8: supplied by vdd-1v8-ls [ 1.989433] gpio-510 (gpio_default): hogged as output/high [ 1.990692] gpio-511 (gpio_default): hogged as output/high [ 1.996908] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 2.135603] max77686-rtc max77620-rtc: registered as rtc0 [ 2.136809] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 2.137121] max77620 4-003c: max77620 probe successful [ 2.144925] random: fast init done ��debugfs initialized ��[ 2.930863] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 2.931851] hid: raw HID events driver (C) Jiri Kosina [ 2.932536] usbcore: registered new interface driver usbhid [ 2.932671] usbhid: USB HID core driver [ 2.934474] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 2.935333] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ��[ 21.010124] Camera-FW on t194-rce-safe started TCU early console enabled. [ 21.085160] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.774 ms, total boot 75.840 ms) ��[ 3.020415] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 3.021215] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 3.022221] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 3.023107] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 3.024639] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 3.025464] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 3.026002] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 3.027711] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (51) [ 3.027960] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 3.030366] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 3.036349] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 3.042744] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 3.047691] tegra186-aondbg aondbg: aondbg driver probe() OK [ 3.056152] denver_knobs_init:MTS_VERSION:55637613 [ 3.070273] t19x_cache tegra-cache: probed [ 3.073088] optee: probing for conduit method. [ 3.073939] optee: revision 3.16 (65cc2218) [ 3.075086] optee: dynamic shared memory is enabled [ 3.076159] optee: initialized driver [ 3.079617] nvpmodel: initialized successfully [ 3.082440] tegra_hv: get_hvd: not initialized yet [ 3.087227] user_ivc_mempool: hypervisor not present [ 3.093645] usbcore: registered new interface driver snd-usb-audio [ 3.100237] u32 classifier [ 3.101442] input device check on [ 3.104628] Actions configured [ 3.108596] Initializing XFRM netlink socket [ 3.113685] NET: Registered protocol family 10 [ 3.119887] Segment Routing with IPv6 [ 3.120580] NET: Registered protocol family 17 [ 3.125163] NET: Registered protocol family 15 [ 3.129547] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 3.143327] Bluetooth: RFCOMM socket layer initialized [ 3.147619] Bluetooth: RFCOMM ver 1.11 [ 3.151471] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.157598] Bluetooth: HIDP socket layer initialized [ 3.163012] 9pnet: Installing 9P2000 support [ 3.166732] Key type dns_resolver registered [ 3.172498] registered taskstats version 1 [ 3.175174] Loading compiled-in X.509 certificates [ 3.187649] Loaded X.509 cert 'Build time autogenerated kernel key: 4a1541133feb47bc383457dd02d1f36e504e6ac4' [ 3.191108] tegra194-pcie 14180000.pcie: Adding to iommu group 6 [ 3.201539] tegra194-pcie 14180000.pcie: host bridge /pcie@14180000 ranges: [ 3.203022] tegra194-pcie 14180000.pcie: IO 0x0038100000..0x00381fffff -> 0x0038100000 [ 3.211890] tegra194-pcie 14180000.pcie: MEM 0x1800000000..0x1b3fffffff -> 0x1800000000 [ 3.220161] tegra194-pcie 14180000.pcie: MEM 0x1b40000000..0x1bffffffff -> 0x0040000000 [ 3.336847] tegra194-pcie 14180000.pcie: Link up [ 3.339525] tegra194-pcie 14180000.pcie: PCI host bridge to bus 0000:00 [ 3.339736] pci_bus 0000:00: root bus resource [bus 00-ff] [ 3.339955] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0x38100000-0x381fffff]) [ 3.340183] pci_bus 0000:00: root bus resource [mem 0x1800000000-0x1b3fffffff pref] [ 3.340370] pci_bus 0000:00: root bus resource [mem 0x1b40000000-0x1bffffffff] (bus address [0x40000000-0xffffffff]) [ 3.340807] pci 0000:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 3.341218] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 3.346822] pci 0000:01:00.0: [144d:a808] type 00 class 0x010802 [ 3.347302] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 3.353087] pci 0000:00:00.0: BAR 14: assigned [mem 0x1b40000000-0x1b400fffff] [ 3.353373] pci 0000:01:00.0: BAR 0: assigned [mem 0x1b40000000-0x1b40003fff 64bit] [ 3.353699] pci 0000:00:00.0: PCI bridge to [bus 01-ff] [ 3.353888] pci 0000:00:00.0: bridge window [mem 0x1b40000000-0x1b400fffff] [ 3.354145] pci 0000:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 3.354478] pci 0000:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 512 [ 3.361025] pcieport 0000:00:00.0: Adding to iommu group 6 [ 3.366038] pcieport 0000:00:00.0: PME: Signaling with IRQ 24 [ 3.372704] pcieport 0000:00:00.0: AER: enabled with IRQ 24 [ 3.378598] nvme 0000:01:00.0: Adding to iommu group 6 [ 3.383344] nvme nvme0: pci function 0000:01:00.0 [ 3.387506] nvme 0000:01:00.0: enabling device (0000 -> 0002) [ 3.389006] tegra194-pcie 14100000.pcie: Adding to iommu group 7 [ 3.399142] nvme nvme0: Shutdown timeout set to 10 seconds [ 3.402771] tegra194-pcie 14100000.pcie: host bridge /pcie@14100000 ranges: [ 3.410776] tegra194-pcie 14100000.pcie: IO 0x0030100000..0x00301fffff -> 0x0030100000 [ 3.419415] tegra194-pcie 14100000.pcie: MEM 0x1200000000..0x122fffffff -> 0x1200000000 [ 3.427844] tegra194-pcie 14100000.pcie: MEM 0x1230000000..0x123fffffff -> 0x0040000000 [ 3.439359] nvme nvme0: 8/0/0 default/read/poll queues [ 3.544983] tegra194-pcie 14100000.pcie: Link up [ 3.547810] tegra194-pcie 14100000.pcie: PCI host bridge to bus 0001:00 [ 3.548053] pci_bus 0001:00: root bus resource [bus 00-ff] [ 3.548180] pci_bus 0001:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x30100000-0x301fffff]) [ 3.548449] pci_bus 0001:00: root bus resource [mem 0x1200000000-0x122fffffff pref] [ 3.548642] pci_bus 0001:00: root bus resource [mem 0x1230000000-0x123fffffff] (bus address [0x40000000-0x4fffffff]) [ 3.549116] pci 0001:00:00.0: [10de:1ad2] type 01 class 0x060400 [ 3.549532] pci 0001:00:00.0: PME# supported from D0 D3hot D3cold [ 3.554660] pci 0001:01:00.0: [8086:1533] type 00 class 0x020000 [ 3.555226] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x0007ffff] [ 3.555628] pci 0001:01:00.0: reg 0x18: [io 0x0000-0x001f] [ 3.555897] pci 0001:01:00.0: reg 0x1c: [mem 0x00000000-0x00003fff] [ 3.557233] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold [ 3.571603] pci 0001:00:00.0: BAR 14: assigned [mem 0x1230000000-0x12300fffff] [ 3.572123] pci 0001:00:00.0: BAR 13: assigned [io 0x100000-0x100fff] [ 3.572369] pci 0001:01:00.0: BAR 0: assigned [mem 0x1230000000-0x123007ffff] [ 3.572642] pci 0001:01:00.0: BAR 3: assigned [mem 0x1230080000-0x1230083fff] [ 3.573160] pci 0001:01:00.0: BAR 2: assigned [io 0x100000-0x10001f] [ 3.576334] pci 0001:00:00.0: PCI bridge to [bus 01-ff] [ 3.581425] pci 0001:00:00.0: bridge window [io 0x100000-0x100fff] [ 3.587694] pci 0001:00:00.0: bridge window [mem 0x1230000000-0x12300fffff] [ 3.595044] pci 0001:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 3.603848] pci 0001:01:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512 [ 3.613767] pcieport 0001:00:00.0: Adding to iommu group 7 [ 3.618159] pcieport 0001:00:00.0: PME: Signaling with IRQ 26 [ 3.624684] pcieport 0001:00:00.0: AER: enabled with IRQ 26 [ 3.630121] igb 0001:01:00.0: Adding to iommu group 7 [ 3.635171] igb 0001:01:00.0: enabling device (0000 -> 0002) [ 3.676008] pps pps0: new PPS source ptp0 [ 3.676548] igb 0001:01:00.0: added PHC on eth0 [ 3.676711] igb 0001:01:00.0: Intel(R) Gigabit Ethernet Network Connection [ 3.677052] igb 0001:01:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 00:0c:8b:b8:08:31 [ 3.677389] igb 0001:01:00.0: eth0: PBA No: 000300-000 [ 3.677572] igb 0001:01:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 3.679164] tegra194-pcie 14140000.pcie: Adding to iommu group 8 [ 3.684975] tegra194-pcie 14140000.pcie: host bridge /pcie@14140000 ranges: [ 3.688303] tegra194-pcie 14140000.pcie: IO 0x0034100000..0x00341fffff -> 0x0034100000 [ 3.696889] tegra194-pcie 14140000.pcie: MEM 0x1280000000..0x12afffffff -> 0x1280000000 [ 3.705335] tegra194-pcie 14140000.pcie: MEM 0x12b0000000..0x12bfffffff -> 0x0040000000 [ 4.784825] tegra194-pcie 14140000.pcie: Phy link never came up [ 4.785392] tegra194-pcie 14140000.pcie: PCI host bridge to bus 0003:00 [ 4.785587] pci_bus 0003:00: root bus resource [bus 00-ff] [ 4.785729] pci_bus 0003:00: root bus resource [io 0x200000-0x2fffff] (bus address [0x34100000-0x341fffff]) [ 4.786000] pci_bus 0003:00: root bus resource [mem 0x1280000000-0x12afffffff pref] [ 4.786212] pci_bus 0003:00: root bus resource [mem 0x12b0000000-0x12bfffffff] (bus address [0x40000000-0x4fffffff]) [ 4.786544] pci 0003:00:00.0: [10de:1ad2] type 01 class 0x060400 [ 4.786947] pci 0003:00:00.0: PME# supported from D0 D3hot D3cold [ 4.793081] pci 0003:00:00.0: PCI bridge to [bus 01-ff] [ 4.793339] pci 0003:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 4.794494] pcieport 0003:00:00.0: Adding to iommu group 8 [ 4.795297] pcieport 0003:00:00.0: PME: Signaling with IRQ 28 [ 4.796665] pcieport 0003:00:00.0: AER: enabled with IRQ 28 [ 4.798320] pci_bus 0003:01: busn_res: [bus 01-ff] is released [ 4.799119] pci 0003:00:00.0: Removing from iommu group 8 [ 4.799389] pci_bus 0003:00: busn_res: [bus 00-ff] is released [ 4.802847] tegra194-pcie 141a0000.pcie: Adding to iommu group 9 [ 4.917753] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.918103] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.918384] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.918654] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.024804] tegra194-pcie 141a0000.pcie: Link up [ 5.027220] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.027412] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.027592] pci_bus 0005:00: root bus resource [io 0x300000-0x3fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.027826] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.028013] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.028380] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.028796] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.033234] pci 0005:01:00.0: [144d:a808] type 00 class 0x010802 [ 5.033702] pci 0005:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 5.038898] pci 0005:00:00.0: BAR 14: assigned [mem 0x1f40000000-0x1f400fffff] [ 5.039274] pci 0005:01:00.0: BAR 0: assigned [mem 0x1f40000000-0x1f40003fff 64bit] [ 5.039622] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.039799] pci 0005:00:00.0: bridge window [mem 0x1f40000000-0x1f400fffff] [ 5.040058] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.040456] pci 0005:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 512 [ 5.049770] pcieport 0005:00:00.0: Adding to iommu group 9 [ 5.054646] pcieport 0005:00:00.0: PME: Signaling with IRQ 30 [ 5.061062] pcieport 0005:00:00.0: AER: enabled with IRQ 30 [ 5.066682] nvme 0005:01:00.0: Adding to iommu group 9 [ 5.071719] nvme nvme1: pci function 0005:01:00.0 [ 5.075383] nvme 0005:01:00.0: enabling device (0000 -> 0002) [ 5.086273] nvme nvme1: Shutdown timeout set to 10 seconds [ 5.091582] nvme nvme1: 8/0/0 default/read/poll queues [ 5.108624] host1x 13e10000.host1x: Adding to iommu group 10 [ 5.134679] host1x 13e10000.host1x: initialized [ 5.136386] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 11 [ 5.137433] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.138714] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 12 [ 5.139580] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.140703] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 13 [ 5.143105] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.152997] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 14 [ 5.159454] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.169595] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 15 [ 5.176343] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.186554] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 16 [ 5.193200] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.203455] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 17 [ 5.210368] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.220625] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 18 [ 5.227240] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.237304] falcon 15340000.vic: Adding to iommu group 19 [ 5.252562] falcon 15340000.vic: initialized [ 5.253749] falcon 15380000.nvjpg: Adding to iommu group 19 [ 5.259488] falcon 15380000.nvjpg: initialized [ 5.259994] falcon 154c0000.nvenc: Adding to iommu group 19 [ 5.269958] falcon 154c0000.nvenc: initialized [ 5.270581] falcon 15a80000.nvenc1: Adding to iommu group 19 [ 5.280419] falcon 15a80000.nvenc1: initialized [ 5.281136] nvdec 15480000.nvdec: Adding to iommu group 19 [ 5.293141] nvdec 15480000.nvdec: initialized [ 5.293783] nvdec 15140000.nvdec1: Adding to iommu group 19 [ 5.305302] nvdec 15140000.nvdec1: initialized [ 5.305838] tsec 15500000.tsec: Adding to iommu group 20 [ 5.311812] tsec 15500000.tsec: initialized [ 5.312315] tsec 15100000.tsecb: Adding to iommu group 21 [ 5.317952] tsec 15100000.tsecb: initialized [ 5.333397] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.335537] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.336066] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.340980] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 22 [ 5.346605] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.352521] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.358203] driver not enabled, cannot register any devices [ 5.364185] tegra194-vi5 15c10000.vi: Adding to iommu group 23 [ 5.370609] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 5.379543] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 5.385145] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 5.395106] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 5.401188] pva 16000000.pva0: Adding to iommu group 24 [ 5.433089] pva 16000000.pva0: initialized [ 5.437656] pva 16800000.pva1: Adding to iommu group 25 [ 5.450782] pva 16800000.pva1: initialized [ 5.454727] nvdla 15880000.nvdla0: Adding to iommu group 26 [ 5.469828] nvdla 15880000.nvdla0: initialized [ 5.471019] nvdla 158c0000.nvdla1: Adding to iommu group 27 [ 5.480581] nvdla 158c0000.nvdla1: initialized [ 5.483977] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=65 [ 5.484289] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 5.485014] tegradccommon 15200000.display-hub: host1x channel mapped [ 5.485337] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 5.485350] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 5.485454] tegradccommon 15200000.display-hub: dma mapping done [ 5.485501] tegradc 15210000.display: Adding to iommu group 28 [ 5.486292] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 5.486879] tegradc 15210000.display: disp0 connected to head1->sor [ 5.490820] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 5.496821] generic_infoframe_type: 0x87 [ 5.502276] tegra_cec 3960000.tegra_cec: probed [ 5.503523] tegra-gpcdma 2600000.dma: Adding to iommu group 1 [ 5.504566] tegradc 15220000.display: Adding to iommu group 28 [ 5.506266] tegradc 15210000.display: DT parsed successfully [ 5.513239] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 5.516730] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=0 [ 5.523349] kfuse 3830000.kfuse: initialized [ 5.533366] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 5.535828] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 5.543181] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 1066500000 Hz [ 5.548107] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 5.555941] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 358400000 Hz [ 5.557105] tegradc 15210000.display: vblank syncpt # 8 for dc 1 [ 5.562854] serial-tegra 3100000.serial: Adding to iommu group 1 [ 5.571006] tegradc 15210000.display: vpulse3 syncpt # 9 for dc 1 [ 5.578075] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 35, base_baud = 0) is a TEGRA_UART [ 5.589437] tegradc 15210000.display: hdmi: can't get adpater for ddc bus 5 [ 5.593335] serial-tegra 3110000.serial: Adding to iommu group 1 [ 5.598259] tegradc 15210000.display: out->type:1 out_ops->init err = -517 [ 5.604571] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 36, base_baud = 0) is a TEGRA_UART [ 5.614542] tegradc 15220000.display: disp0 connected to head2->sor1 [ 5.647255] generic_infoframe_type: 0x87 [ 5.651150] tegradc 15220000.display: DT parsed successfully [ 5.651431] tegra-i2c 31e0000.i2c: Adding to iommu group 1 [ 5.656748] tegradc 15220000.display: dc.2 probe not in device tree order, deferring [ 5.667810] pca954x 8-0070: pca954x_probe: could not read force bus number [ 5.678414] i2c i2c-8: Added multiplexed i2c bus 9 [ 5.682960] i2c i2c-8: Added multiplexed i2c bus 10 [ 5.688058] i2c i2c-8: Added multiplexed i2c bus 11 [ 5.692245] i2c i2c-8: Added multiplexed i2c bus 12 [ 5.697114] pca954x 8-0070: registered 4 multiplexed busses for I2C mux pca9544 [ 5.718247] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 2263000 KHz, changing to: 2265600 KHz [ 5.719350] tegra194-cpufreq ccplex: probed with BWMGR [ 5.721100] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 5.721305] vdd-usb-vbus0: supplied by vdd-ac-bat [ 5.721914] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 5.722045] sdhci-tegra 3400000.sdhci: BWMGR client registration for eMC Successful [ 5.731117] irq: IRQ241: trimming hierarchy from :interrupt-controller@3881000 [ 5.737035] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 5.737323] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 241 [ 5.738109] mmc0: CQHCI version 5.10 [ 5.745166] driver not enabled, cannot register any devices [ 5.752072] tegra194-vi5 15c10000.vi: initialized [ 5.752076] driver not enabled, cannot register any devices [ 5.752922] tegradc 15210000.display: disp0 connected to head1->sor [ 5.790719] generic_infoframe_type: 0x87 [ 5.791169] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 5.794228] tegradc 15210000.display: DT parsed successfully [ 5.795590] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 5.795595] tegra-xusb 3610000.xhci: xHCI Host Controller [ 5.795611] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 5.796223] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 5.796249] tegra-xusb 3610000.xhci: irq 190, io mem 0x03610000 [ 5.796535] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 5.796539] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.796542] usb usb1: Product: xHCI Host Controller [ 5.796545] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 5.796548] usb usb1: SerialNumber: 3610000.xhci [ 5.796931] hub 1-0:1.0: USB hub found [ 5.796965] hub 1-0:1.0: 4 ports detected [ 5.797265] tegra-xusb 3610000.xhci: xHCI Host Controller [ 5.797273] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 5.797280] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 5.797439] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 5.797443] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.797446] usb usb2: Product: xHCI Host Controller [ 5.797450] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 5.797453] usb usb2: SerialNumber: 3610000.xhci [ 5.797710] hub 2-0:1.0: USB hub found [ 5.797755] hub 2-0:1.0: 4 ports detected [ 5.803249] nvethernet 2490000.ethernet: Adding to iommu group 29 [ 5.807703] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=0 [ 5.817716] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 5.824150] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 5.830210] nvethernet 2490000.ethernet: failed to read MDIO address [ 5.830217] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 5.830221] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 5.830224] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 5.852533] mmc1: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit [ 5.853618] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 1066500000 Hz [ 5.853655] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 5.853676] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 5.853681] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 5.925776] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:63:a8:5c [ 5.932205] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 358400000 Hz [ 5.941024] tegradc 15210000.display: vblank syncpt # 11 for dc 1 [ 5.950790] tegradc 15210000.display: vpulse3 syncpt # 12 for dc 1 [ 5.958706] nvethernet 2490000.ethernet: Macsec not supported [ 5.967601] tegradc 15210000.display: hdmi: invalid prod list prod_list_hdmi_board [ 5.976150] nvethernet 2490000.ethernet: eth1 (HW ver: 50) created with 1 DMA channels [ 5.981325] tegradc 15210000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 5.988101] tegradc 15210000.display: probed [ 5.995831] irq: IRQ243: trimming hierarchy from :pmc@c360000 [ 6.057327] mmc0: Command Queue Engine enabled [ 6.058967] irq: IRQ244: trimming hierarchy from :interrupt-controller@3881000 [ 6.064901] mmc0: periodic cache flush enabled [ 6.070968] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.078191] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.087262] tegra-se-nvhost 15810000.se: Adding to iommu group 30 [ 6.094381] mmcblk0: mmc0:0001 HBG4a2 29.1 GiB [ 6.099667] tegra-se-nvhost 15810000.se: initialized [ 6.103991] mmcblk0boot0: mmc0:0001 HBG4a2 partition 1 8.00 MiB [ 6.109561] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.115665] mmcblk0boot1: mmc0:0001 HBG4a2 partition 2 8.00 MiB [ 6.120369] tegra-se-nvhost 15820000.se: Adding to iommu group 31 [ 6.126510] mmcblk0rpmb: mmc0:0001 HBG4a2 partition 3 4.00 MiB, chardev (510:0) [ 6.133431] tegra-se-nvhost 15820000.se: initialized [ 6.150407] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 p34 p35 p36 p37 p38 p39 p40 p41 [ 6.156556] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.207427] Console: switching to colour frame buffer device 80x30 [ 6.207534] tegra-se-nvhost 15830000.se: Adding to iommu group 32 [ 6.213299] tegradc 15210000.display: fb registered [ 6.220467] tegra-se-nvhost 15830000.se: initialized [ 6.224566] irq: IRQ245: trimming hierarchy from :pmc@c360000 [ 6.230630] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.235565] tegradc 15220000.display: disp1 connected to head2->sor1 [ 6.241908] tegra-se-nvhost 15840000.se: Adding to iommu group 33 [ 6.248010] generic_infoframe_type: 0x87 [ 6.254640] tegra-se-nvhost 15840000.se: initialized [ 6.257937] tegradc 15220000.display: DT parsed successfully [ 6.264713] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.268822] tegradc 15220000.display: Display dc.(____ptrval____) registered with id=1 [ 6.275565] tegra_actmon d230000.actmon: in actmon_register()... [ 6.283022] tegradc 15220000.display: vblank syncpt # 17 for dc 2 [ 6.288688] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.294748] tegradc 15220000.display: vpulse3 syncpt # 18 for dc 2 [ 6.306927] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.307112] tegradc 15220000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.314903] hvc_sysfs: hypervisor is not present [ 6.321794] tegradc 15220000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.381525] ALSA device list: [ 6.381629] No soundcards found. [ 6.400517] tegradc 15220000.display: probed [ 6.400818] tegradc 15220000.display: fb registered [ 6.400981] irq: IRQ246: trimming hierarchy from :pmc@c360000 [ 6.402539] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.402939] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 6.403915] tegradc 15220000.display: supply avdd_hdmi not found, using dummy regulator [ 6.404203] tegradc 15220000.display: supply avdd_hdmi_pll not found, using dummy regulator [ 6.409937] tegradc 15220000.display: hdmi: tmds rate:154128K prod-setting:prod_c_hdmi_111m_223m [ 6.411860] tegradc 15220000.display: hdmi: get YCC quant from EDID. [ 6.415813] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.415979] Extcon AUX1(HDMI) enable [ 6.417074] Freeing unused kernel memory: 3968K [ 6.417403] Run /init as init process [ 6.463271] Root device found: initrd [ 6.464666] Mount initrd as rootfs and enter recovery mode Finding OTA work dir on external storage devices Checking whether device /dev/mmcblk?p1 exist Looking for OTA work directory on the device(s): /dev/mmcblk0p1 Checking whether device /dev/sd?1 exist Device /dev/sd?1 does not exist Checking whether device /dev/nvme?n1p1 exist Device /dev/nvme?n1p1 does not exist Finding OTA work dir on internal storage device [ 6.520797] tegra_cec 3960000.tegra_cec: physical address: 10:00. ��WARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ��OTA work directory /mnt/ota_work is not found on /dev/mmcblk0p1 OTA work directory is not found on internal and external storage devices bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell bash-5.0# [ 6.548140] tegradc 15220000.display: blank - powerdown [ 6.553811] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 6.595491] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 6.595495] Extcon AUX1(HDMI) disable [ 6.618436] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 6.619323] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 6.656403] tegradc 15220000.display: unblank [ 6.657714] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.657946] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 6.663408] tegradc 15220000.display: hdmi: tmds rate:154000K prod-setting:prod_c_hdmi_111m_223m [ 6.665148] tegradc 15220000.display: hdmi: get YCC quant from EDID. [ 6.669102] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.669104] Extcon AUX1(HDMI) enable [ 6.681912] tegradc 15220000.display: sync windows ret = 247 [ 6.684040] extcon-disp-state external-connection:disp-state: cable 52 state 1 [ 6.684550] Extcon HDMI: HPD enabled [ 6.686228] tegradc 15220000.display: hdmi: plugged [ 7.415888] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.416081] Extcon AUX1(HDMI) disable [ 7.438882] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 7.439913] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.440101] tegradc 15220000.display: blank - powerdown [ 7.440221] extcon-disp-state external-connection:disp-state: cable 52 state 0 [ 7.440354] Extcon HDMI: HPD disabled [ 7.440423] tegradc 15220000.display: hdmi: unplugged [ 7.551962] tegradc 15220000.display: blank - powerdown [ 7.551971] tegradc 15220000.display: unblank [ 7.553180] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.553410] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 7.558282] tegradc 15220000.display: hdmi: tmds rate:154000K prod-setting:prod_c_hdmi_111m_223m [ 7.559745] tegradc 15220000.display: hdmi: get YCC quant from EDID. [ 7.563623] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.563626] Extcon AUX1(HDMI) enable [ 7.576516] tegradc 15220000.display: sync windows ret = 247 [ 7.577576] extcon-disp-state external-connection:disp-state: cable 52 state 1 [ 7.577708] Extcon HDMI: HPD enabled [ 7.577780] tegradc 15220000.display: hdmi: plugged [ 7.931465] tegra-xusb 3610000.xhci: entering ELPG done [ 8.820772] tegra_cec 3960000.tegra_cec: timeout in tegra_cec_native_write_l:193. [ 8.820947] tegra_cec 3960000.tegra_cec: Sent res: -62. [ 8.821097] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 56.033403] random: crng init done bash-5.0# bash-5.0# ls bin dev etc init lib mnt proc root sbin sys tmp usr var bash-5.0#