Welcome to minicom 2.7.1 OPTIONS: I18n Compiled on Aug 13 2017, 15:25:34. Port /dev/ttyUSB0, 17:22:48 Press CTRL-A Z for help on special keys �� [0000.065] I> MB1 (version: 0.32.0.0-t234-54845784-57325615) [0000.070] I> t234-A01-1-Silicon (0x12347) Prod [0000.074] I> Boot-mode : Coldboot [0000.078] I> Emulation: [0000.080] I> Entry timestamp: 0x00000000 [0000.084] I> last_boot_error: 0x0 [0000.087] I> BR-BCT: preprod_dev_sign: 0 [0000.091] I> rst_source: 0x0, rst_level: 0x0 [0000.095] I> Task: Bootchain select WAR set (0x5000ba65) [0000.100] I> Task: Enable SLCG (0x5000bab1) [0000.104] I> Task: CRC check (0x5001ea19) [0000.108] I> Task: Initialize MB2 params (0x5000cb51) [0000.113] I> MB2-params @ 0x40060000 [0000.117] I> Task: Crypto init (0x5001d981) [0000.121] I> Task: Secure debug controls (0x5000c0a9) [0000.126] I> Task: strap war set (0x5000ba2d) [0000.130] I> Task: Initialize SOC Therm (0x5001bd35) [0000.135] I> Task: Program NV master stream id (0x5000c05d) [0000.140] I> Task: Verify boot mode (0xd4820f1) [0000.146] I> Task: Alias fuses (0x5001095d) [0000.151] W> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0000.158] I> Task: Print SKU type (0x5000f5f1) [0000.162] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x000001c8 [0000.167] I> FUSE_OPT_GPC_DISABLE = 0x00000002 [0000.172] I> FUSE_OPT_TPC_DISABLE = 0x000000f0 [0000.176] I> FUSE_OPT_DLA_DISABLE = 0x00000003 [0000.180] I> FUSE_OPT_PVA_DISABLE = 0x00000001 [0000.184] I> FUSE_OPT_NVENC_DISABLE = 0x00000001 [0000.189] I> FUSE_OPT_NVDEC_DISABLE = 0x00000000 [0000.193] I> FUSE_OPT_FSI_DISABLE = 0x00000001 [0000.198] I> FUSE_OPT_EMC_DISABLE = 0x0000000c [0000.202] I> FUSE_BOOTROM_PATCH_VERSION = 0x7 [0000.206] I> FUSE_PSCROM_PATCH_VERSION = 0x7 [0000.210] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2 [0000.214] I> FUSE_SKU_INFO_0 = 0xd5 [0000.217] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS [0000.222] I> FUSE_PACKAGE_INFO_0 = 0x2 [0000.225] I> SKU: Prod [0000.227] I> Task: Boost clocks (0x500148a1) [0000.232] I> Initializing PLLC2 for AXI_CBB. [0000.236] I> AXI_CBB : src = 35, divisor = 0 [0000.240] I> Task: Voltage monitor (0x50014b49) [0000.244] I> VMON: Vmon re-calibration and fine tuning done [0000.250] I> Task: UPHY init (0x5000d065) [0000.256] I> HSIO UPHY init done [0000.259] E> Skipping GBE UPHY config [0000.262] I> Task: Boot device init (0x50000be9) [0000.267] I> Boot_device: QSPI_FLASH instance: 0 [0000.271] I> Qspi clock source : pllc_out0 [0000.275] I> QSPI Flash: Macronix 64MB [0000.279] I> QSPI-0l initialized successfully [0000.283] I> Task: TSC init (0x50020a4d) [0000.287] I> Task: Load membct (0x50011fe9) [0000.291] I> RAM_CODE 0x4000421 [0000.294] I> Loading MEMBCT [0000.297] I> Slot: 0 [0000.299] I> Binary[0] block-0 (partition size: 0x40000) [0000.304] I> get_binary_info: Binary name: MEM-BCT-0 [0000.309] I> Size of crypto header is 8192 [0000.313] I> BCH load address is : 0x40050000 [0000.317] I> Size of crypto header is 8192 [0000.321] I> BCH of MEM-BCT-0 read from storage [0000.326] I> BCH address is : 0x40050000 [0000.330] I> MEM-BCT-0 header integrity check is success [0000.335] I> Binary magic in BCH component 0 is MEM0 [0000.340] I> component binary type is 0 [0000.344] I> MEM-BCT-0 binary is read from storage [0000.349] I> MEM-BCT-0 binary integrity check is success [0000.354] I> Binary MEM-BCT-0 loaded successfully at 0x40040000 (0xe580) [0000.361] I> RAM_CODE 0x4000421 [0000.366] I> RAM_CODE 0x4000421 [0000.370] I> Task: Load Page retirement list (0x500115b1) [0000.375] I> Task: SDRAM params override (0x50011fc5) [0000.380] I> Task: Save mem-bct info (0x50014fa1) [0000.385] I> Task: Carveout allocate (0x50015005) [0000.389] I> RCM blob carveout will not be allocated [0000.394] I> ECC region[0]: Start:0x0, End:0x0 [0000.398] I> ECC region[1]: Start:0x0, End:0x0 [0000.402] I> ECC region[2]: Start:0x0, End:0x0 [0000.407] I> ECC region[3]: Start:0x0, End:0x0 [0000.411] I> ECC region[4]: Start:0x0, End:0x0 [0000.415] I> Non-ECC region[0]: Start:0x80000000, End:0x280000000 [0000.421] I> Non-ECC region[1]: Start:0x0, End:0x0 [0000.426] I> Non-ECC region[2]: Start:0x0, End:0x0 [0000.430] I> Non-ECC region[3]: Start:0x0, End:0x0 [0000.435] I> Non-ECC region[4]: Start:0x0, End:0x0 [0000.445] I> allocated(CO:31) base:0x278000000 size:0x8000000 align: 0x8000000 [0000.452] I> allocated(CO:43) base:0x274000000 size:0x4000000 align: 0x200000 [0000.459] I> allocated(CO:20) base:0x272000000 size:0x2000000 align: 0x2000000 [0000.466] I> allocated(CO:24) base:0x270000000 size:0x2000000 align: 0x2000000 [0000.473] I> allocated(CO:28) base:0x26e000000 size:0x2000000 align: 0x2000000 [0000.480] I> allocated(CO:22) base:0x26d000000 size:0x1000000 align: 0x1000000 [0000.487] I> allocated(CO:35) base:0x26c200000 size:0xe00000 align: 0x10000 [0000.494] I> allocated(CO:02) base:0x26b800000 size:0x800000 align: 0x800000 [0000.501] I> allocated(CO:03) base:0x26b000000 size:0x800000 align: 0x800000 [0000.508] I> allocated(CO:06) base:0x26a800000 size:0x800000 align: 0x800000 [0000.515] I> allocated(CO:10) base:0x26a000000 size:0x800000 align: 0x800000 [0000.522] I> allocated(CO:56) base:0x269800000 size:0x800000 align: 0x200000 [0000.529] I> allocated(CO:07) base:0x269400000 size:0x400000 align: 0x400000 [0000.536] I> allocated(CO:33) base:0x269000000 size:0x400000 align: 0x200000 [0000.543] I> allocated(CO:23) base:0x26c000000 size:0x200000 align: 0x200000 [0000.550] I> allocated(CO:01) base:0x268f00000 size:0x100000 align: 0x100000 [0000.556] I> allocated(CO:04) base:0x268e00000 size:0x100000 align: 0x100000 [0000.563] I> allocated(CO:05) base:0x268d00000 size:0x100000 align: 0x100000 [0000.570] I> allocated(CO:08) base:0x268c00000 size:0x100000 align: 0x100000 [0000.577] I> allocated(CO:09) base:0x268b00000 size:0x100000 align: 0x100000 [0000.584] I> allocated(CO:15) base:0x268a00000 size:0x100000 align: 0x100000 [0000.591] I> allocated(CO:17) base:0x268900000 size:0x100000 align: 0x100000 [0000.598] I> allocated(CO:27) base:0x268800000 size:0x100000 align: 0x100000 [0000.605] I> allocated(CO:42) base:0x268700000 size:0x100000 align: 0x100000 [0000.612] I> allocated(CO:54) base:0x268680000 size:0x80000 align: 0x80000 [0000.619] I> allocated(CO:34) base:0x268670000 size:0x10000 align: 0x10000 [0000.625] I> allocated(CO:47) base:0x268200000 size:0x400000 align: 0x200000 [0000.632] I> allocated(CO:72) base:0x268000000 size:0x200000 align: 0x10000 [0000.639] I> allocated(CO:48) base:0x268650000 size:0x20000 align: 0x10000 [0000.646] I> allocated(CO:69) base:0x268630000 size:0x20000 align: 0x10000 [0000.653] I> allocated(CO:49) base:0x268620000 size:0x10000 align: 0x10000 [0000.659] I> allocated(CO:50) base:0x268610000 size:0x10000 align: 0x10000 [0000.666] I> NSDRAM base: 0x80000000, end: 0x268670000 [0000.671] I> Task: Thermal check (0x50021d55) [0000.675] I> max_chip_limit = 105 [0000.678] I> min_chip_limit = -28 [0000.681] I> max temp read = 35 [0000.684] I> min temp read = 34 [0000.687] I> Task: Update FSI SCR with thermal fuse data (0x50021e61) [0000.694] I> Task: Enable WDT 5th expiry (0x50021a41) [0000.699] I> Task: I2C register (0x50000b85) [0000.703] I> Task: Reset FSI (0x500148b1) [0000.707] I> Task: Pinmux init (0x5001397d) [0000.711] I> skipped mmio_addr = 0x9240008 [0000.715] I> skipped mmio_addr = 0x9240000 [0000.719] I> skipped mmio_addr = 0x9240010 [0000.723] I> skipped mmio_addr = 0x9240018 [0000.727] I> skipped mmio_addr = 0x9240020 [0000.731] I> skipped mmio_addr = 0x9240030 [0000.735] I> skipped mmio_addr = 0x9240028 [0000.738] I> skipped mmio_addr = 0x9240038 [0000.742] I> skipped mmio_addr = 0x9240040 [0000.746] I> skipped mmio_addr = 0x9240048 [0000.750] I> skipped mmio_addr = 0x9241000 [0000.754] I> skipped mmio_addr = 0x9241008 [0000.758] I> skipped mmio_addr = 0x9241010 [0000.762] I> skipped mmio_addr = 0x9241018 [0000.766] I> skipped mmio_addr = 0x9241020 [0000.770] I> skipped mmio_addr = 0x9241028 [0000.774] I> skipped mmio_addr = 0x9241030 [0000.778] I> skipped mmio_addr = 0x9241038 [0000.782] I> skipped mmio_addr = 0x9241040 [0000.786] I> skipped mmio_addr = 0x9242000 [0000.790] I> skipped mmio_addr = 0x9242008 [0000.794] I> Task: Prod config init (0x50013ddd) [0000.798] I> Task: Pad voltage init (0x50013a2d) [0000.802] I> Task: Prod init (0x50013e21) [0000.806] I> Task: Common rail init (0x50014575) [0000.811] I> DONE: Thermal config [0000.815] W> DEVICE_PROD: module = 13, instance = 4 not found in device prod. [0000.823] I> DONE: SOC rail config [0000.827] W> PMIC_CONFIG: Rail: MEMIO rail config not found in MB1 BCT. [0000.834] I> DONE: MEMIO rail config [0000.838] W> PMIC_CONFIG: Rail: GPU rail info not found in MB1 BCT. [0000.844] I> DONE: GPU rail info [0000.848] W> PMIC_CONFIG: Rail: CV rail info not found in MB1 BCT. [0000.854] I> DONE: CV rail info [0000.857] I> Task: Mem clock src (0x50011de9) [0000.861] I> Task: Misc. board config (0x5001461d) [0000.866] W> PMIC_CONFIG: Platform config not found in MB1 BCT. [0000.872] I> Task: SDRAM init (0x50011ded) [0000.876] I> SDRAM-params @ 0xd485000 [0000.879] I> MemoryType: 4 MemBctRevision: 1 [0000.886] I> MSS code-drop: NvBootSdramInit [0000.890] I> MSS CAR: PLLM/HUB programming for MemoryType: 4 and MemBctRevision: 1 [0000.897] I> MSS CAR: PLLM/HUB programming for MemoryType: 4 and MemBctRevision: 1 [0000.905] I> MSS CAR: Init PLLM [0000.908] I> MSS CAR: Init PLLHUB [0000.912] I> Encryption: MTS: en, TX: en, VPR: en, GSC: en [0000.924] I> mb1_sdram_init Done ! [0000.927] I> SDRAM Size in Total 0x200000000 [0000.931] I> Task: Dram Ecc scrub (0x500116f5) [0000.935] I> Task: DRAM alias check (0x50011fbd) [0000.947] I> Task: Program NSDRAM carveout (0x50015961) [0000.953] I> NSDRAM carveout encryption is enabled [0000.958] I> Program NSDRAM carveout [0000.962] I> Task: Register checker (0x50011fc1) [0000.969] I> Task: Enable clock-mon (0x50020a35) [0000.976] I> FMON: Fmon re-programming done [0000.980] I> Task: Mapper init (0x5001ef4d) [0000.985] I> Task: SC7 Context Init (0x50020d3d) [0000.991] I> Task: CCPLEX IST init (0x5000c925) [0000.997] I> Task: CPU WP0 (0x5000bb15) [0001.002] I> Loading MCE [0001.005] I> Slot: 0 [0001.007] I> Binary[8] block-0 (partition size: 0x80000) [0001.013] I> get_binary_info: Binary name: MCE [0001.018] I> Size of crypto header is 8192 [0001.022] I> BCH load address is : 0x4003e000 [0001.028] I> Size of crypto header is 8192 [0001.032] I> BCH of MCE read from storage [0001.037] I> BCH address is : 0x4003e000 [0001.042] I> MCE header integrity check is success [0001.047] I> Binary magic in BCH component 0 is MTSM [0001.052] I> component binary type is 8 [0001.056] I> Size of crypto header is 8192 [0001.063] I> MCE binary is read from storage [0001.068] I> MCE binary integrity check is success [0001.073] I> Binary MCE loaded successfully at 0x40000000 (0x2c880) [0001.081] I> Size of crypto header is 8192 [0001.095] I> Size of crypto header is 8192 [0001.100] I> Sending WP0 mailbox command to PSC [0001.111] I> Task: XUSB Powergate (0x50000b91) [0001.117] I> Skipping powergate XUSB. [0001.121] I> Task: MB1 fixed firewalls (0x5002006d) [0001.132] W> Firewall readback mismatch [0001.136] W> Firewall readback mismatch [0001.145] W> Firewall readback mismatch [0001.154] I> Task: Load bpmp-fw (0x500203c9) [0001.160] I> Slot: 0 [0001.162] I> Binary[15] block-0 (partition size: 0x180000) [0001.168] I> get_binary_info: Binary name: BPMP_FW [0001.174] I> Size of crypto header is 8192 [0001.178] I> BCH load address is : 0x807fe000 [0001.183] I> Size of crypto header is 8192 [0001.188] I> BCH of BPMP_FW read from storage [0001.193] I> BCH address is : 0x807fe000 [0001.198] I> BPMP_FW header integrity check is success [0001.204] I> Binary magic in BCH component 0 is BPMF [0001.209] I> component binary type is 15 [0001.213] I> Size of crypto header is 8192 [0001.229] I> BPMP_FW binary is read from storage [0001.236] I> BPMP_FW binary integrity check is success [0001.241] I> Binary BPMP_FW loaded successfully at 0x80000000 (0xfdd80) [0001.249] I> Slot: 0 [0001.252] I> Binary[16] block-10000 (partition size: 0x400000) [0001.258] I> get_binary_info: Binary name: BPMP_FW_DTB [0001.264] I> Size of crypto header is 8192 [0001.268] I> BCH load address is : 0x807fc000 [0001.274] I> Size of crypto header is 8192 [0001.279] I> BCH of BPMP_FW_DTB read from storage [0001.284] I> BCH address is : 0x807fc000 [0001.289] I> BPMP_FW_DTB header integrity check is success [0001.295] I> Binary magic in BCH component 0 is BPMD [0001.300] I> component binary type is 16 [0001.304] I> Size of crypto header is 8192 [0001.310] I> BPMP_FW_DTB binary is read from storage [0001.316] I> BPMP_FW_DTB binary integrity check is success [0001.322] I> Binary BPMP_FW_DTB loaded successfully at 0x807e31f0 (0x18e00) [0001.331] I> Task: Load psc-fw (0x50020551) [0001.336] I> Slot: 0 [0001.338] I> Binary[17] block-0 (partition size: 0xc0000) [0001.345] I> get_binary_info: Binary name: PSC_FW [0001.350] I> Size of crypto header is 8192 [0001.354] I> BCH load address is : 0x80ffe000 [0001.359] I> Size of crypto header is 8192 [0001.364] I> BCH of PSC_FW read from storage [0001.369] I> BCH address is : 0x80ffe000 [0001.374] I> PSC_FW header integrity check is success [0001.380] I> Binary magic in BCH component 0 is PFWP [0001.385] I> component binary type is 17 [0001.389] I> Size of crypto header is 8192 [0001.398] I> PSC_FW binary is read from storage [0001.403] I> PSC_FW binary integrity check is success [0001.409] I> Binary PSC_FW loaded successfully at 0x80000000 (0x59980) [0001.417] I> Task: Load nvdec-fw (0x500205c5) [0001.423] I> Slot: 0 [0001.425] I> Binary[7] block-0 (partition size: 0x100000) [0001.431] I> get_binary_info: Binary name: NVDEC [0001.436] I> Size of crypto header is 8192 [0001.441] I> BCH load address is : 0x800fe000 [0001.446] I> Size of crypto header is 8192 [0001.451] I> BCH of NVDEC read from storage [0001.455] I> BCH address is : 0x800fe000 [0001.460] I> NVDEC header integrity check is success [0001.466] I> Binary magic in BCH component 0 is NDEC [0001.471] I> component binary type is 7 [0001.475] I> Size of crypto header is 8192 [0001.483] I> NVDEC binary is read from storage [0001.488] I> NVDEC binary integrity check is success [0001.494] I> Binary NVDEC loaded successfully at 0x80000000 (0x46000) [0001.501] I> Size of crypto header is 8192 [0001.519] I> Task: Load tsec-fw (0x5002097d) [0001.525] I> TSEC-FW load support not enabled [0001.529] I> Task: GPIO interrupt map (0x500147b5) [0001.535] I> Task: SC7 context save (0x50020d79) [0001.541] I> Slot: 0 [0001.543] I> Binary[27] block-0 (partition size: 0x100000) [0001.550] I> get_binary_info: Binary name: BR_BCT [0001.555] I> Size of crypto header is 8192 [0001.559] I> Size of crypto header is 8192 [0001.564] I> BR_BCT binary is read from storage [0001.569] I> BR_BCT binary integrity check is success [0001.575] I> Binary BR_BCT loaded successfully at 0xa0000000 (0x2000) [0001.582] I> Slot: 0 [0001.585] I> Binary[13] block-0 (partition size: 0x30000) [0001.591] I> get_binary_info: Binary name: SC7-FW [0001.596] I> Size of crypto header is 8192 [0001.600] I> Size of crypto header is 8192 [0001.605] I> BCH load address is : 0xa0002000 [0001.610] I> Size of crypto header is 8192 [0001.615] I> BCH of SC7-FW read from storage [0001.620] I> BCH address is : 0xa0002000 [0001.625] I> SC7-FW header integrity check is success [0001.630] I> Binary magic in BCH component 0 is WB0B [0001.636] I> component binary type is 13 [0001.640] I> Size of crypto header is 8192 [0001.646] I> SC7-FW binary is read from storage [0001.652] I> SC7-FW binary integrity check is success [0001.657] I> Binary SC7-FW loaded successfully at 0xa0004000 (0x26db0) [0001.665] I> Slot: 0 [0001.667] I> Binary[22] block-0 (partition size: 0x30000) [0001.673] I> get_binary_info: Binary name: PSC_RF [0001.679] I> Size of crypto header is 8192 [0001.683] I> Size of crypto header is 8192 [0001.688] I> BCH load address is : 0xa002adb0 [0001.693] I> Size of crypto header is 8192 [0001.698] I> BCH of PSC_RF read from storage [0001.702] I> BCH address is : 0xa002adb0 [0001.708] I> PSC_RF header integrity check is success [0001.713] I> Binary magic in BCH component 0 is PSCR [0001.718] I> component binary type is 22 [0001.723] I> Size of crypto header is 8192 [0001.729] I> PSC_RF binary is read from storage [0001.734] I> PSC_RF binary integrity check is success [0001.739] I> Binary PSC_RF loaded successfully at 0xa002cdb0 (0x1b140) [0001.762] I> Task: Save WP0 payload to SC7 ctx (0x50021725) [0001.769] I> Task: Load MB2rf binary to SC7 ctx (0x500216b9) [0001.776] I> Slot: 0 [0001.778] I> Binary[14] block-0 (partition size: 0x20000) [0001.784] I> get_binary_info: Binary name: MB2_RF [0001.789] I> Size of crypto header is 8192 [0001.794] I> Size of crypto header is 8192 [0001.798] I> BCH load address is : 0xa00d6a48 [0001.803] I> Size of crypto header is 8192 [0001.808] I> BCH of MB2_RF read from storage [0001.813] I> BCH address is : 0xa00d6a48 [0001.818] I> MB2_RF header integrity check is success [0001.824] I> Binary magic in BCH component 0 is MB2R [0001.829] I> component binary type is 14 [0001.833] I> Size of crypto header is 8192 [0001.839] I> MB2_RF binary is read from storage [0001.844] I> MB2_RF binary integrity check is success [0001.850] I> Binary MB2_RF loaded successfully at 0xa00d8a48 (0x1bfa0) [0001.858] I> Task: Save Fuse-Bypass data to SC7 ctx (0x50021621) [0001.865] W> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0001.873] I> SC7 context fuse-bypass data is empty [0001.878] I> Task: Save PMIC data to SC7 ctx (0x5002144d) [0001.884] I> Task: Save I2C bus freq data to SC7 ctx (0x500213d9) [0001.892] I> Task: Save SOCTherm data to SC7 ctx (0x50021365) [0001.898] I> Task: Save FMON data to SC7 ctx (0x500212f1) [0001.905] I> Task: Save VMON data to SC7 ctx (0x50021279) [0001.911] I> Task: Save TZDRAM data to SC7 ctx (0x5002178d) [0001.918] I> Task: Save GPIO int data to SC7 ctx (0x50021561) [0001.925] I> Task: Save clock data to SC7 ctx (0x50021205) [0001.931] I> Task: Save debug data to SC7 ctx (0x50021191) [0001.942] I> SC7 context save done [0001.946] I> Task: Load MB2/Applet/FSKP (0x5000ca55) [0001.952] I> Loading MB2 [0001.955] I> Slot: 0 [0001.957] I> Binary[6] block-0 (partition size: 0x80000) [0001.963] I> get_binary_info: Binary name: MB2 [0001.968] I> Size of crypto header is 8192 [0001.973] I> BCH load address is : 0x8007e000 [0001.978] I> Size of crypto header is 8192 [0001.983] I> BCH of MB2 read from storage [0001.987] I> BCH address is : 0x8007e000 [0001.992] I> MB2 header integrity check is success [0001.997] I> Binary magic in BCH component 0 is MB2B [0002.003] I> component binary type is 6 [0002.007] I> Size of crypto header is 8192 [0002.016] I> MB2 binary is read from storage [0002.022] I> MB2 binary integrity check is success [0002.027] I> Binary MB2 loaded successfully at 0x80000000 (0x68ee0) [0002.035] I> Task: Map CCPLEX SHARED carveout (0x5000cbf9) [0002.042] I> Task: Prepare MB2 params (0x5000cca9) [0002.048] I> BR-BCT Boot Chain Fields [0002.052] I> u32_non_gpio_select_boot_chain : 0 [0002.057] I> u32_num_boot_chains : 2 [0002.063] I> bf_bl_gpio_select_boot_chain_1b : 0 [0002.068] I> Task: Dram ecc test (0x50011791) [0002.073] I> Task: Misc NV security settings (0x5000c529) [0002.080] I> NVDEC sticky bits programming done [0002.085] I> Successfully powergated NVDEC [0002.089] I> Task: Disable/Reload WDT (0x50021a99) [0002.095] I> Task: Program misc carveouts (0x50015381) [0002.101] I> Program IPC carveouts [0002.108] I> SLCG Global override status := 0x0 [0002.113] I> MB1: MSS reconfig completed I> MB2 (version: 0.0.0.0-t234-54845784-9c429857) I> t234-A01-1-Silicon (0x12347) I> Boot-mode : Coldboot I> Emulation: I> Entry timestamp: 0x0020dcb9 I> Regular heap: [base:0x40040000, size:0x10000] I> DMA heap: [base:0x269800000, size:0x800000] I> Task: ARI update carveout TZDRAM (0x50001e80) I> Task: Enable hot-plug capability (0x50026c6c) I> Task: PSC mailbox init (0x50016a7c) I> Task: Crypto init (0x500065a8) I> Task: Enable GP-SE clock (0x50001fe4) I> Task: DICE Identity init (0x50019e50) I> DICE is not enabled. I> Task: OEM SC7 context save init (0x50019550) I> Task: I2C register (0x50001e44) I> Task: Map CCPLEX_INTERWORLD_SHMEM carveout (0x50001e2c) I> Task: Program CBB PCIE AMAP regions (0x50019b64) I> Task: Boot device init (0x50001d74) I> Boot_device: QSPI_FLASH instance: 0 I> Qspi clock source : pllc_out0 I> QSPI-0l initialized successfully I> Task: Partition Manager Init (0x50001d70) I> Found 57 partitions in QSPI_FLASH (instance 0) I> Task: Load and authenticate registered FWs (0x5001ce48) I> Task: Load AUXP FWs (0x5002680c) I> Successfully register SPE FW load task with MB2 loader I> Skipping SCE FW load I> Successfully register RCE FW load task with MB2 loader I> Successfully register DCE FW load task with MB2 loader I> Unpowergating APE I> Unpowergate done I> Successfully register APE FW load task with MB2 loader I> Skipping FSI FW load I> Successfully register XUSB FW load task with MB2 loader I> Partition name: A_spe-fw I> Size of partition: 589824 I> Binary@ device:3/0 block-55040 (partition size: 0x90000), name: A_spe-fw I> Partition name: A_rce-fw I> Size of partition: 1048576 I> Binary@ device:3/0 block-56192 (partition size: 0x100000), name: A_rce-fw I> spe: Authentication Finalize Done I> Binary spe loaded successfully at 0x268c00000 I> Partition name: A_dce-fw I> Size of partition: 5242880 I> Binary@ device:3/0 block-44800 (partition size: 0x500000), name: A_dce-fw I> rce: Authentication Finalize Done I> Binary rce loaded successfully at 0x268900000 I> dce : oem authentication of header done I> dce : meta-blob integrity check is success. I> dce : will be decompressed at 0x272000000 I> version 1 Bin 1 BCheckSum 0 content_size 0 Content ChkSum 1 reserved_00 0 I> Reserved10 0 BlockMaxSize 5 Reserved11 0 I> dce : decompressed to 9449600 bytes I> dce: plain binary integrity check is success I> Partition name: A_adsp-fw I> Size of partition: 2097152 I> Binary@ device:3/0 block-58240 (partition size: 0x200000), name: A_adsp-fw I> dce: Authentication Finalize Done I> Binary dce loaded successfully at 0x272000000 I> Partition name: A_xusb-fw I> Size of partition: 262144 I> Binary@ device:3/0 block-9472 (partition size: 0x40000), name: A_xusb-fw I> ape: Authentication Finalize Done I> Binary ape loaded successfully at 0x269400000 I> xusb: Authentication Finalize Done I> Binary xusb loaded successfully at 0x268d00000 I> Task: Carveout setup (0x5001f55c) I> Program remaining OEM carveouts I> Task: Enable FSITHERM (0x50016950) I> Task: Enable FSI VMON (0x500164d8) I> Task: Validate FSI Therm readings (0x50016530) I> Task: Restore XUSB sec (0x50001d44) I> Task: Enable FSI SE clock (0x50016ed8) I> Task: Initialize SBSA UART CAR (0x50001f48) I> Task: Ratchet update (0x50027d08) W> OPTIN fuse not set, skip ratchet update I> Task: Initialize CPUBL Params (0x50017e0c) I> CPUBL-params @ 0x26e000000 I> Task: Prepare eeprom data (0x50017bd8) I> Task: FSI padctl context save (0x500196e0) E> Skipping FSI padctl config save: fsi not enabled I> Task: Unpowergate APE (0x50017640) W> mb2_unpowergate_ape: skip! APE is in unpowergated state I> Task: OEM firewalls (0x5002397c) I> OEM firewalls configured I> Task: Powergate APE (0x500177b4) I> Powergating APE I> Powergate done I> Task: OEM firewall restore saved settings (0x50023dd0) I> Task: Unhalt AUXPs (0x50026a74) I> Unhalting SPE.. I> Enabling combined UART ����spe: early_init vic initialized tsc initialized aon lic initialized spe: tag is 243b265b351d6bb9cc7b2e3acc5d90f8 spe: SafeRTOS v8.4 spe: init scheduler initialized aon hsp initialized tag initialized tcu initialized bpmp ipc initialized spe: late init cpu_nic clock initialized apb clock initialized pm initialized bpmp hsp initialized top1 hsp initialized ccplex ipc initialized spe: start scheduler �� I> Task: Trigger mailbox for PSC-BL1 exit (0x50016afc) I> Sending opcode 0x4d420802 to psc ��INFO: Entering psc_monitor_init! INFO: GSC22 BOM:0x26d002000 SIZE:0x1000000 CLIENT_ACCESS1:00180000 INFO: PSCFW BUILD VERSION: 8a33b23-73b589c-8a15f76-rel-t234 INFO: mstatus:0xa00000808 INFO: Supervisor entry_point:c108c00 ��I> Received ACK from psc I> Task: ��INFO: MONITOR: user task addr:0x26d022000, blob offset:0x00020000 INFO: MONITOR: populated user images:13 INFO: mret to Supervisor! INFO: psc supervisor init. INFO: psc_irq_init... INFO: enter idle task. �� bpmp: socket 0 bpmp: base binary md5 is 1377b684fe55be78e1d7fc3e0f143b55 bpmp: combined binary md5 is f0fadc45ec6216cb5b0bcb3771407fc2 bpmp: firmware tag is f0fadc45ec6216cb5b0b-1377b684fe5 initialized vwdt initialized mail_early initialized fuse initialized vfrel initialized hwwdt initialized adc fmon_populate_monitors: found 199 monitors initialized fmon initialized mc initialized reset initialized uphy_early initialized emc_early 471 clocks registered initialized clk_mach initialized clk_cal_early initialized clk_mach_early_config initialized io_dpd initialized soctherm initialized tj_init initialized regime initialized i2c vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors initialized vrmon initialized regulator initialized avfs_clk_platform initialized powergate initialized dvs initialized clk_mach_config initialized pm initialized suspend initialized strap initialized mce_dbell ��Start secure NOR provision (0x5001997c) I> Task: Load FSI keyblob (0x50016f20) I> Task: Unhalt AUXPs (0��initialized emc initialized emc_mrq ��x50026a7c) I> SCE unhalt skipped ��initialized clk_cal initialized uphy_dt initialized uphy_mrq HSIO UPHY reset has been de-asserted 0x0 initialized uphy initialized pg_late initialized pg_mrq_init swdtimer_init: 0 reg polling start w period 47 ms initialized swdtimer initialized hwwdt_late initialized bwmgr initialized thermal_host_trip initialized thermal_mrq initialized oc_mrq initialized reset_mrq initialized mail_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized i2c_mrq initialized tag_mrq initialized bwmgr_mrq initialized console_mrq missing prod DT calibration data for 199 fmons initialized clk_sync_fmon_post ��I> Unhalting RCE I> RCE unhalt s��initializ��[ 2.573935] Camera-FW on t234-rce-safe started TCU early console enabled.��ed clk_cal_late initialized noc_late initialized cvc initialized avfs_clk_mach_post initialized avfs_clk_platform_post initialized cvc_late initialized �� ��rm initialized console_late handling unreferenced clks enable can1_core enable can1_host enable can2_core enable can2_host enable pwm3 enable mss_encrypt enable maud enable pllg_ref enable dsi_core enable aza_2xbit enable xusb_ss enable xusb_fs enable xusb_falcon enable xusb_core_mux enable dsi_lp clk_check_max_rates: pex1_c6_core rate 500000000 > max 250000000 clk_check_max_rates: pex2_c7_core rate 500000000 > max 250000000 clk_check_max_rates: pex2_c8_core rate 500000000 > max 250000000 clk_check_max_rates: pex2_c9_core rate 500000000 > max 250000000 clk_check_max_rates: pex2_c10_core rate 500000000 > max 250000000 clk_check_max_rates: pex0_c0_core rate 500000000 > max 250000000 clk_check_max_rates: pex0_c1_core rate 500000000 > max 250000000 clk_check_max_rates: pex0_c2_core rate 500000000 > max 250000000 clk_check_max_rates: pex0_c3_core rate 500000000 > max 250000000 clk_check_max_rates: pex0_c4_core rate 500000000 > max 250000000 clk_check_max_rates: pex1_c5_core rate 500000000 > max 250000000 initialized clk_mach_post initialized pg_post initialized regulator_post initialized profile initialized fuse_late initialized mrq initialized patrol_scrubber initialized cactmon initialized extras_post bpmp: init complete ��[ 2.697974] Camera-FW on t234-rce-safe ready SHA1=97e50cbf (crt 1.487 ms, total boot 125.629 ms) ��uccessful I> DCE unhalt successful I> APE unhalt skipped I> FSI unhalt skipped I> Task: Load CPUBL (0x50017f04) I> Task: Load TOS (0x50018608) I> Task: Load and authenticate registered FWs (0x5001ce48) �� ��I> Partition name: A_cpu-bootloader I> Size of partition: 3670016 I> Binary@ device:3/0 block-24832 (partition size: 0x380000), name: A_cpu-bootloader I> Partition name: A_secure-os I> Size of partition: 4194304 I> Binary@ device:3/0 block-32000 (partition size: 0x400000), name: A_secure-os I> MB2-params @ 0x40060000 I> cpubl: Authentication Finalize Done I> Binary cpubl loaded successfully at 0x268200000 I> tos: Authentication Finalize Done I> Binary tos loaded successfully at 0x277dfe000 I> Relocating OP-TEE dtb from: 0x277eff770 to 0x268630000, size: 0x1976 I> [0] START: 0x80000000, SIZE: 0x1e8670000 I> [1] START: 0x26e000000, SIZE: 0x2000000 I> Setting NS memory ranges to OP-TEE dtb finished. I> Partition name: A_eks I> Size of partition: 262144 I> Binary@ device:3/0 block-44288 (partition size: 0x40000), name: A_eks I> eks: Authentication Finalize Done I> Binary eks loaded successfully at 0x269800200 I> EKB detected (length: 0x410) @ VA:0x269800200 I> Task: Prepare TOS params (0x50018580) ��DCE: FW Boot Done ��I> Setting EKB blob info to OPTEE dtb finished. I> Setting OPTEE arg3: 0x268630000 I> Task: OEM SC7 context save (0x500197dc) I> OEM sc7 context saved I> Task: Disable MSS perf stats (0x50026b08) I> Task: Program display sticky bits (0x50026a84) I> Task: Storage device deinit (0x50001eec) I> Task: SMMU external bypass disable (0x50016a60) I> Task: SMMU init (0x5001697c) I> Task: Program GICv3 registers (0x50026ba8) I> Task: Audit firewall settings (0x50023bd0) I> Task: Bootchain failure check (0x50002434) I> Current Boot-Chain Slot: 0 I> BR-BCT Boot-Chain is 0, and status is 1. Set UPDATE_BRBCT bit to 0 I> MB2 finished ��NOTICE: BL31: v2.6(release):07eea4970 NOTICE: BL31: Built : 07:55:15, Mar 19 2023 I/TC: I/TC: Non-secure external DT found I/TC: OP-TEE version: 3.19 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Sun Mar 19 15:02:44 UTC 2023 aarch64 I/TC: WARNING: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: WARNING: Test OEM keys are being used! I/TC: This is only for TZ-SE testing and should NOT be used for a shipping product! I/TC: Primary CPU switching to normal world boot �� Jetson UEFI firmware (version 3.1-32827747 built on 2023-03-19T14:56:32+00:00) ** WARNING: Test Key is used. ** L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ��I/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 6 initializing I/TC: Secondary CPU 6 switching to normal world boot I/TC: Secondary CPU 7 initializing I/TC: Secondary CPU 7 switching to normal world boot ��[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd421] [ 0.000000] Linux version 5.10.104-tegra (root@aaeon.com) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #2 SMP PREEMPT Thu May 11 13:27:05 CST 2023 [ 0.000000] OF: fdt: memory scan node memory@80000000, reg size 16, [ 0.000000] OF: fdt: - 80000000 , c0000000 [ 0.000000] Machine model: NVIDIA Orin Nano Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25f4fae98 SMBIOS=0xffff0000 SMBIOS 3.0=0x2412f0000 MEMATTR=0x24008f018 ESRT=0x240eb4898 RNG=0x264536c18 MEMRESERVE=0x240e8cf18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x0000000240eb4898 to 0x0000000240eb48d0. [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000254400000, size 256 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000026fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000fffdffff] [ 0.000000] node 0: [mem 0x00000000fffe0000-0x00000000ffffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000023bffffff] [ 0.000000] node 0: [mem 0x000000023c000000-0x000000023e1bffff] [ 0.000000] node 0: [mem 0x000000023e1c0000-0x000000023ff7ffff] [ 0.000000] node 0: [mem 0x000000023ff80000-0x000000023ffaffff] [ 0.000000] node 0: [mem 0x000000023ffb0000-0x000000023ffcffff] [ 0.000000] node 0: [mem 0x000000023ffd0000-0x000000024006ffff] [ 0.000000] node 0: [mem 0x0000000240070000-0x000000024008ffff] [ 0.000000] node 0: [mem 0x0000000240090000-0x00000002400affff] [ 0.000000] node 0: [mem 0x00000002400b0000-0x0000000240d22fff] [ 0.000000] node 0: [mem 0x0000000240d23000-0x0000000240e88fff] [ 0.000000] node 0: [mem 0x0000000240e89000-0x00000002412dffff] [ 0.000000] node 0: [mem 0x00000002412e0000-0x00000002412fffff] [ 0.000000] node 0: [mem 0x0000000241300000-0x000000024160ffff] [ 0.000000] node 0: [mem 0x0000000241610000-0x000000024165ffff] [ 0.000000] node 0: [mem 0x0000000241660000-0x000000024181ffff] [ 0.000000] node 0: [mem 0x0000000241820000-0x00000002419fffff] [ 0.000000] node 0: [mem 0x0000000241a00000-0x0000000241a8ffff] [ 0.000000] node 0: [mem 0x0000000241a90000-0x0000000241c6ffff] [ 0.000000] node 0: [mem 0x0000000241c70000-0x0000000241ccffff] [ 0.000000] node 0: [mem 0x0000000241cd0000-0x0000000241dbffff] [ 0.000000] node 0: [mem 0x0000000241dc0000-0x0000000241deffff] [ 0.000000] node 0: [mem 0x0000000241df0000-0x0000000241dfffff] [ 0.000000] node 0: [mem 0x0000000241e00000-0x0000000241eaffff] [ 0.000000] node 0: [mem 0x0000000241eb0000-0x0000000241f4ffff] [ 0.000000] node 0: [mem 0x0000000241f50000-0x000000024204ffff] [ 0.000000] node 0: [mem 0x0000000242050000-0x00000002420effff] [ 0.000000] node 0: [mem 0x00000002420f0000-0x00000002421effff] [ 0.000000] node 0: [mem 0x00000002421f0000-0x000000024228ffff] [ 0.000000] node 0: [mem 0x0000000242290000-0x0000000242b5ffff] [ 0.000000] node 0: [mem 0x0000000242b60000-0x0000000242d3ffff] [ 0.000000] node 0: [mem 0x0000000242d40000-0x00000002644effff] [ 0.000000] node 0: [mem 0x00000002644f0000-0x000000026453ffff] [ 0.000000] node 0: [mem 0x0000000264540000-0x0000000267ffffff] [ 0.000000] node 0: [mem 0x0000000268200000-0x000000026860ffff] [ 0.000000] node 0: [mem 0x000000026e000000-0x000000026fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000026fffffff] [ 0.000000] On node 0, zone Normal: 496 pages in unavailable ranges [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90200 r8192 d32680 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1976336 [ 0.000000] Kernel command line: root=/dev/nvme0n1p1 rw rootwait rootfstype=ext4 mminit_loglevel=4 console=ttyTCU0,115200 console=ttyAMA0,115200 firmware_class.path=/etc/firmware fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000effe0000-0x00000000fffe0000] (256MB) [ 0.000000] Memory: 7237312K/8032320K available (18560K kernel code, 3184K rwdata, 7236K rodata, 4032K init, 1418K bss, 532864K reserved, 262144K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 960 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] GICv3: 16 PPIs implemented [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000000f440000 [ 0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:608, num:70) [ 0.000000] GICv2m: range[mem 0x0f410000-0x0f41ffff], SPI[608:677] [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000003] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000664] Console: colour dummy device 80x25 [ 0.000706] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.000714] pid_max: default: 32768 minimum: 301 [ 0.000779] LSM: Security Framework initializing [ 0.000802] Yama: becoming mindful. [ 0.000820] SELinux: Initializing. [ 0.000881] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.000897] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.001615] /cpus/cpu-map/cluster1: empty cluster [ 0.001912] rcu: Hierarchical SRCU implementation. [ 0.001992] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.002388] DTS File Name: /media/gary/D/git_project/build-l4t-src/kernel_src/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t23x/p3768/kernel-dts/tegra234-p3767-0003-p3768s [ 0.002393] DTB Build time: May 11 2023 13:34:25 [ 0.003652] Tegra Revision: A01 SKU: 0xd5 CPU Process: 0 SoC Process: 0 [ 0.003820] Remapping and enabling EFI services. [ 0.005054] smp: Bringing up secondary CPUs ... [ 0.033742] Detected PIPT I-cache on CPU1 [ 0.033776] GICv3: CPU1: found redistributor 100 region 0:0x000000000f460000 [ 0.033804] CPU1: Booted secondary processor 0x0000000100 [0x410fd421] [ 0.062441] Detected PIPT I-cache on CPU2 [ 0.062451] GICv3: CPU2: found redistributor 200 region 0:0x000000000f480000 [ 0.062465] CPU2: Booted secondary processor 0x0000000200 [0x410fd421] [ 0.091071] Detected PIPT I-cache on CPU3 [ 0.091080] GICv3: CPU3: found redistributor 300 region 0:0x000000000f4a0000 [ 0.091094] CPU3: Booted secondary processor 0x0000000300 [0x410fd421] [ 0.121749] Detected PIPT I-cache on CPU4 [ 0.121771] GICv3: CPU4: found redistributor 10200 region 0:0x000000000f500000 [ 0.121801] CPU4: Booted secondary processor 0x0000010200 [0x410fd421] [ 0.150501] Detected PIPT I-cache on CPU5 [ 0.150512] GICv3: CPU5: found redistributor 10300 region 0:0x000000000f520000 [ 0.150529] CPU5: Booted secondary processor 0x0000010300 [0x410fd421] [ 0.150594] smp: Brought up 1 node, 6 CPUs [ 0.150608] SMP: Total of 6 processors activated. [ 0.150613] CPU features: detected: Privileged Access Never [ 0.150614] CPU features: detected: LSE atomic instructions [ 0.150616] CPU features: detected: User Access Override [ 0.150618] CPU features: detected: 32-bit EL0 Support [ 0.150621] CPU features: detected: Common not Private translations [ 0.150623] CPU features: detected: RAS Extension Support [ 0.150625] CPU features: detected: Data cache clean to the PoU not required for I/D coherence [ 0.150627] CPU features: detected: CRC32 instructions [ 0.150629] CPU features: detected: Speculative Store Bypassing Safe (SSBS) [ 0.189046] CPU: All CPU(s) started at EL2 [ 0.190829] devtmpfs: initialized [ 0.207628] Registered cp15_barrier emulation handler [ 0.207637] Registered setend emulation handler [ 0.207643] KASLR enabled [ 0.207771] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.207782] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.209747] pinctrl core: initialized pinctrl subsystem [ 0.210305] SMBIOS 3.0.0 present. [ 0.210314] DMI: Unknown NVIDIA Orin Nano Developer Kit/NVIDIA Orin Nano Developer Kit, BIOS 3.1-32827747 03/19/2023 [ 0.210592] NET: Registered protocol family 16 [ 0.211497] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.211564] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.211621] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.211647] audit: initializing netlink subsys (disabled) [ 0.211739] audit: type=2000 audit(0.208:1): state=initialized audit_enabled=0 res=1 [ 0.211917] thermal_sys: Registered thermal governor 'step_wise' [ 0.211920] thermal_sys: Registered thermal governor 'power_allocator' [ 0.211923] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.212807] cpuidle: using governor menu [ 0.212917] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.212990] ASID allocator initialised with 32768 entries [ 0.213089] Serial: AMBA PL011 UART driver [ 0.215014] tegra234_mc_sid_probe(): tegra234 mc-sid probe successful [ 0.215036] Tegra reboot handler registered. [ 0.236576] mc: mapped MMIO address: 0xffff8000107b0000 -> 0x2c10000 [ 0.236588] mc: mapped MMIO address: 0xffff8000107d0000 -> 0x2c20000 [ 0.236596] mc: mapped MMIO address: 0xffff8000107f0000 -> 0x2c30000 [ 0.236606] mc: mapped MMIO address: 0xffff800010810000 -> 0x2c40000 [ 0.236613] mc: mapped MMIO address: 0xffff800010830000 -> 0x2c50000 [ 0.236619] mc: mapped MMIO address: 0xffff800010850000 -> 0x2b80000 [ 0.236627] mc: mapped MMIO address: 0xffff800010870000 -> 0x2b90000 [ 0.236634] mc: mapped MMIO address: 0xffff800010890000 -> 0x2ba0000 [ 0.236641] mc: mapped MMIO address: 0xffff8000108b0000 -> 0x2bb0000 [ 0.236647] mc: mapped MMIO address: 0xffff8000108d0000 -> 0x1700000 [ 0.236654] mc: mapped MMIO address: 0xffff8000108f0000 -> 0x1710000 [ 0.236660] mc: mapped MMIO address: 0xffff800010910000 -> 0x1720000 [ 0.236666] mc: mapped MMIO address: 0xffff800010930000 -> 0x1730000 [ 0.236673] mc: mapped MMIO address: 0xffff800010950000 -> 0x1740000 [ 0.236680] mc: mapped MMIO address: 0xffff800010970000 -> 0x1750000 [ 0.236687] mc: mapped MMIO address: 0xffff800010990000 -> 0x1760000 [ 0.236693] mc: mapped MMIO address: 0xffff8000109b0000 -> 0x1770000 [ 0.236700] nv-tegra-mc 2c10000.mc: No mssnvlink node [ 0.236719] mc-err: mcerr ops are set to t23x [ 0.237475] 31d0000.serial: ttyAMA0 at MMIO 0x31d0000 (irq = 66, base_baud = 0) is a SBSA [ 1.390403] printk: console [ttyAMA0] enabled [ 1.399370] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 1.406078] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 1.412777] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 1.419475] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 1.428081] ACPI: Interpreter disabled. [ 1.432382] ddr-vddq: supplied by vdd-5v [ 1.436505] ddr-vdd2: supplied by vdd-5v [ 1.440559] vdd-AO-1v2: supplied by vdd-5v [ 1.444797] vdd-3v3: supplied by vdd-5v [ 1.448769] vdd-rtc: supplied by vdd-AO-1v2 [ 1.453071] vdd-0v95-uphy: supplied by vdd-AO-1v2 [ 1.457906] vdd-0v95-hdmi: supplied by vdd-AO-1v2 [ 1.462883] vdd-1v8: supplied by vdd-3v3-sys [ 1.467266] vdd-3v3-AO: supplied by vdd-5v-sys [ 1.471825] vdd-av10-hub: supplied by vdd-5v-sys [ 1.476571] vdd-vbus-a: supplied by vdd-5v-sys [ 1.481127] vdd-vbus-b: supplied by vdd-5v-sys [ 1.485700] vdd-3v3-dp: supplied by vdd-3v3-sys [ 1.490521] iommu: Default domain type: Translated [ 1.495437] eventlib_kernel: keventlib is initialized, test id: 0 [ 1.501730] SCSI subsystem initialized [ 1.505627] usbcore: registered new interface driver usbfs [ 1.511131] usbcore: registered new interface driver hub [ 1.516451] usbcore: registered new device driver usb [ 1.521726] mc: Linux media interface: v0.10 [ 1.526007] videodev: Linux video capture interface: v2.00 [ 1.531672] pps_core: LinuxPPS API ver. 1 registered [ 1.536636] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.545772] PTP clock support registered [ 1.549929] tegra_wdt_t18x 2190000.watchdog: Tegra WDT init timeout = 120 sec [ 1.557084] tegra_wdt_t18x 2190000.watchdog: Registered successfully [ 1.564782] Registered efivars operations [ 1.569352] FPGA manager framework [ 1.572776] Advanced Linux Sound Architecture Driver Initialized. [ 1.579160] Bluetooth: Core ver 2.22 [ 1.582742] NET: Registered protocol family 31 [ 1.587185] Bluetooth: HCI device and connection manager initialized [ 1.593543] Bluetooth: HCI socket layer initialized [ 1.598421] Bluetooth: L2CAP socket layer initialized [ 1.603478] Bluetooth: SCO socket layer initialized [ 1.608905] camchar: rtcpu character device driver loaded [ 1.614543] clocksource: Switched to clocksource arch_sys_counter [ 1.818082] VFS: Disk quotas dquot_6.6.0 [ 1.822047] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.829088] pnp: PnP ACPI: disabled [ 1.834830] la/ptsa driver initialized. [ 1.838724] NET: Registered protocol family 2 [ 1.843210] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 1.852295] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 1.860841] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 1.868830] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 1.876738] TCP: Hash tables configured (established 65536 bind 65536) [ 1.883337] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.890146] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.897455] NET: Registered protocol family 1 [ 1.902014] RPC: Registered named UNIX socket transport module. [ 1.907946] RPC: Registered udp transport module. [ 1.912648] RPC: Registered tcp transport module. [ 1.917347] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.923795] PCI: CLS 0 bytes, default 64 [ 1.927837] Trying to unpack rootfs image as initramfs... [ 2.089520] Freeing initrd memory: 9120K [ 2.095706] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 2.103634] kvm [1]: IPA Size Limit: 48 bits [ 2.107949] kvm [1]: GICv3: no GICV resource entry [ 2.112740] kvm [1]: disabling GICv2 emulation [ 2.117206] kvm [1]: GIC system register CPU interface enabled [ 2.123103] kvm [1]: vgic interrupt IRQ9 [ 2.127133] kvm [1]: VHE mode initialized successfully [ 2.132940] Initialise system trusted keyrings [ 2.137468] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 2.146485] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 2.152648] NFS: Registering the id_resolver key type [ 2.157713] Key type id_resolver registered [ 2.161895] Key type id_legacy registered [ 2.165944] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 2.172652] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 2.180057] ntfs: driver 2.1.32 [Flags: R/W]. [ 2.199584] NET: Registered protocol family 38 [ 2.204030] Key type asymmetric registered [ 2.208124] Asymmetric key parser 'x509' registered [ 2.213021] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 2.220478] io scheduler mq-deadline registered [ 2.225010] io scheduler kyber registered [ 2.233411] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 2.239010] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 2.244600] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 2.251085] efifb: probing for efifb [ 2.254688] efifb: framebuffer at 0x23c000000, using 8640k, total 8640k [ 2.261302] efifb: mode is 1920x1080x32, linelength=8192, pages=1 [ 2.267395] efifb: scrolling: redraw [ 2.270968] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 2.280337] Console: switching to colour frame buffer device 240x67 [ 2.290157] fb0: EFI VGA frame buffer device [ 2.296391] tegra_dc_assign_hw_data: no matching compatible node [ 2.302401] tegradccommon module_init failed [ 2.306671] tegradc module_init failed [ 2.310719] EINJ: ACPI disabled. [ 2.315722] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 2.322606] tegra-pmc: ### PMC reset source: SYS_RESET_N [ 2.327918] tegra-pmc: ### PMC reset level: L0 [ 2.332357] tegra-pmc: ### PMC reset status reg: 0x0 [ 2.338735] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 3.783747] random: fast init done [ 3.964159] printk: console [ttyTCU0] enabled [ 3.969258] arm-smmu 12000000.iommu: probing hardware configuration... [ 3.975959] arm-smmu 12000000.iommu: SMMUv2 with: [ 3.980790] arm-smmu 12000000.iommu: stage 1 translation [ 3.986333] arm-smmu 12000000.iommu: stage 2 translation [ 3.991866] arm-smmu 12000000.iommu: nested translation [ 3.997317] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 4.004728] arm-smmu 12000000.iommu: 128 context banks (0 stage-2 only) [ 4.013843] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 4.020539] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 4.027232] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 4.034795] arm-smmu 10000000.iommu: probing hardware configuration... [ 4.041491] arm-smmu 10000000.iommu: SMMUv2 with: [ 4.046313] arm-smmu 10000000.iommu: stage 1 translation [ 4.051851] arm-smmu 10000000.iommu: stage 2 translation [ 4.057396] arm-smmu 10000000.iommu: nested translation [ 4.062844] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 4.070255] arm-smmu 10000000.iommu: 128 context banks (0 stage-2 only) [ 4.079402] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 4.086099] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 4.092790] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 4.099978] arm-smmu 8000000.iommu: probing hardware configuration... [ 4.106589] arm-smmu 8000000.iommu: SMMUv2 with: [ 4.111320] arm-smmu 8000000.iommu: stage 1 translation [ 4.116772] arm-smmu 8000000.iommu: stage 2 translation [ 4.122229] arm-smmu 8000000.iommu: nested translation [ 4.127589] arm-smmu 8000000.iommu: stream matching with 128 register groups [ 4.127593] arm-smmu 8000000.iommu: 128 context banks (0 stage-2 only) [ 4.129827] arm-smmu 8000000.iommu: Supported page sizes: 0x00001000 [ 4.148317] arm-smmu 8000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 4.154920] arm-smmu 8000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 4.162224] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 4.172113] tegra_profiler: version: 1.151, samples/io: 51/30 [ 4.178089] tegra_profiler: auth: init [ 4.182241] nvsciipc: loaded module [ 4.187717] tun: Universal TUN/TAP device driver, 1.6 [ 4.193449] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 4.200866] hns3: Copyright (c) 2017 Huawei Corporation. [ 4.206348] e1000e: Intel(R) PRO/1000 Network Driver [ 4.211442] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 4.217535] igb: Intel(R) Gigabit Ethernet Network Driver [ 4.223067] igb: Copyright (c) 2007-2014 Intel Corporation. [ 4.228962] PPP generic driver version 2.4.2 [ 4.233395] PPP BSD Compression module registered [ 4.238230] PPP Deflate Compression module registered [ 4.243430] PPP MPPE Compression module registered [ 4.248369] usbcore: registered new interface driver r8152 [ 4.254016] usbcore: registered new interface driver asix [ 4.259558] usbcore: registered new interface driver ax88179_178a [ 4.265819] usbcore: registered new interface driver cdc_ether [ 4.271812] usbcore: registered new interface driver net1080 [ 4.277632] usbcore: registered new interface driver cdc_subset [ 4.283710] usbcore: registered new interface driver zaurus [ 4.289445] usbcore: registered new interface driver cdc_ncm [ 4.295254] usbcore: registered new interface driver aqc111 [ 4.301109] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.307463] ohci-pci: OHCI PCI platform driver [ 4.312035] ohci-platform: OHCI generic platform driver [ 4.317761] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 4.324110] usbcore: registered new interface driver uas [ 4.329581] usbcore: registered new interface driver usb-storage [ 4.335920] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 4.342019] mousedev: PS/2 mouse device common for all mice [ 4.347763] usbcore: registered new interface driver xpad [ 4.355227] tegra_rtc c2a0000.rtc: registered as rtc1 [ 4.360451] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 4.366873] i2c /dev entries driver [ 4.370592] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 4.376410] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 4.382095] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 4.387782] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 4.393462] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 4.399134] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 4.404827] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 4.410516] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 4.419996] device-mapper: uevent: version 1.0.3 [ 4.424837] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 4.434569] sdhci: Secure Digital Host Controller Interface driver [ 4.440916] sdhci: Copyright(c) Pierre Ossman [ 4.445381] Synopsys Designware Multimedia Card Interface Driver [ 4.451633] sdhci-pltfm: SDHCI platform and OF driver helper [ 4.457838] sdhci-tegra 3400000.sdhci: Adding to iommu group 3 [ 4.458063] SMCCC: SOC_ID: ID = jep106:036b:0023 Revision = 0x00000401 [ 4.471202] tegra-bpmp bpmp: firmware: f0fadc45ec6216cb5b0b-1377b684fe5 [ 4.479887] nvvrs_pseq 4-003c: NVVRS Vendor ID: 0x9 [ 4.485294] nvvrs_pseq 4-003c: NVVRS Model Rev: 0x82 [ 4.494133] nvvrs-pseq-rtc nvvrs-pseq-rtc: registered as rtc0 [ 4.501493] nvvrs-pseq-rtc nvvrs-pseq-rtc: setting system clock to 1970-01-01T00:04:42 UTC (282) [ 4.510525] nvvrs_pseq 4-003c: NVVRS PSEQ probe successful ��Failed to create /rm/vdd_cpu Failed to create /rm/vdd_cpu debugfs initialized ��[ 6.351754] hid: raw HID events driver (C) Jiri Kosina [ 6.357606] usbcore: registered new interface driver usbhid [ 6.363336] usbhid: USB HID core driver [ 6.367806] tegra-dce d800000.dce: Adding to iommu group 4 [ 6.374925] dce: dce_ipc_channel_init:319 Invalid Channel State [0x0] for ch_type [2] [ 6.383520] tegra234-aon c000000.aon: Adding to iommu group 5 [ 6.390151] dce: dce_mailbox_set_full_interrupt:165 Intr bit set multiple times for MB : [0x5] [ 6.391404] c000000.aon:hsp: probed [ 6.399136] dce: dce_admin_ipc_handle_signal:90 Spurious signal on channel: [0]. Ignored... [ 6.411576] tegra234-aon c000000.aon: init done [ 6.411972] tegra23x-psc e860000.psc: Adding to iommu group 6 [ 6.416257] dce: dce_admin_send_cmd_ver:424 version : [0x2] err : [0x0] [ 6.422529] tegra23x-psc e860000.psc: ext_cfg base:(____ptrval____) [ 6.429199] dce: dce_mailbox_set_full_interrupt:165 Intr bit set multiple times for MB : [0x1] [ 6.435532] tegra23x-psc e860000.psc: init done [ 6.444481] dce: dce_admin_setup_clients_ipc:553 Channel Reset Complete for Type [1] ... [ 6.444483] dce: dce_admin_ipc_handle_signal:90 Spurious signal on channel: [1]. Ignored... [ 6.444492] dce: dce_admin_ipc_handle_signal:90 Spurious signal on channel: [1]. Ignored... [ 6.449341] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 7 [ 6.457550] dce: dce_admin_setup_clients_ipc:529 Get queue info failed for [2] [ 6.457680] dce: dce_mailbox_set_full_interrupt:165 Intr bit set multiple times for MB : [0x2] [ 6.467048] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 6.475136] dce: dce_admin_setup_clients_ipc:553 Channel Reset Complete for Type [3] ... [ 6.475137] dce: dce_admin_ipc_handle_signal:90 Spurious signal on channel: [3]. Ignored... [ 6.475147] dce: dce_admin_ipc_handle_signal:90 Spurious signal on channel: [3]. Ignored... [ 6.484325] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 6.489532] dce: dce_start_boot_flow:173 DCE_BOOT_DONE [ 6.498320] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 6.558689] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 6.570626] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 6.582588] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 6.595157] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 6.607970] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 6.620214] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (114) [ 6.627020] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 6.638143] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=97e50cbff52bc4b542b2989187109c001c01cf77 [ 6.651945] t19x_cache tegra-cache: probed [ 6.656486] scf-pmu-drv scf-pmu: Registered T23x SCF Uncore PMU [ 6.667433] optee: probing for conduit method. [ 6.672033] optee: revision 3.19 (3f29c61f) [ 6.672807] optee: dynamic shared memory is enabled [ 6.682277] optee: initialized driver [ 6.697650] nvpmodel: initialized successfully [ 6.702365] tegra_hv: get_hvd: not initialized yet [ 6.707313] user_ivc_mempool: hypervisor not present [ 6.713094] usbcore: registered new interface driver snd-usb-audio [ 6.720290] u32 classifier [ 6.723077] input device check on [ 6.726844] Actions configured [ 6.730494] Initializing XFRM netlink socket [ 6.735366] NET: Registered protocol family 10 [ 6.740864] Segment Routing with IPv6 [ 6.744693] NET: Registered protocol family 17 [ 6.749292] NET: Registered protocol family 15 [ 6.753916] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 6.768032] Bluetooth: RFCOMM socket layer initialized [ 6.773339] Bluetooth: RFCOMM ver 1.11 [ 6.777201] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 6.783297] Bluetooth: HIDP socket layer initialized [ 6.789320] 9pnet: Installing 9P2000 support [ 6.793771] Key type dns_resolver registered [ 6.798873] registered taskstats version 1 [ 6.803102] Loading compiled-in X.509 certificates [ 6.818894] Loaded X.509 cert 'Build time autogenerated kernel key: 50e25a48c060ec441b8d8141602b1e9033297d6d' [ 6.829615] tegra194-pcie 14100000.pcie: Adding to iommu group 8 [ 6.842617] tegra194-pcie 14100000.pcie: Using GICv2m MSI allocator [ 6.850012] tegra194-pcie 14160000.pcie: Adding to iommu group 9 [ 6.862404] tegra194-pcie 14160000.pcie: Using GICv2m MSI allocator [ 6.869399] tegra194-pcie 141e0000.pcie: Adding to iommu group 10 [ 6.881566] tegra194-pcie 141e0000.pcie: Using GICv2m MSI allocator [ 6.888453] tegra194-pcie 140a0000.pcie: Adding to iommu group 11 [ 6.900638] tegra194-pcie 140a0000.pcie: Using GICv2m MSI allocator [ 6.933982] tegra-soc-hwpm f100000.tegra_soc_hwpm: Adding to iommu group 12 [ 6.944136] host1x 13e40000.host1x: Adding to iommu group 13 [ 6.971027] host1x 13e40000.host1x: initialized [ 6.976152] iommu_context_dev 13e40000.host1x:niso0_ctx0: Adding to iommu group 14 [ 6.984193] iommu_context_dev 13e40000.host1x:niso0_ctx0: initialized (streamid=53, iommu=smmu.0x0000000012000000) [ 6.996529] iommu_context_dev 13e40000.host1x:niso0_ctx1: Adding to iommu group 15 [ 7.004553] iommu_context_dev 13e40000.host1x:niso0_ctx1: initialized (streamid=54, iommu=smmu.0x0000000012000000) [ 7.016854] iommu_context_dev 13e40000.host1x:niso0_ctx2: Adding to iommu group 16 [ 7.024825] iommu_context_dev 13e40000.host1x:niso0_ctx2: initialized (streamid=55, iommu=smmu.0x0000000012000000) [ 7.037116] iommu_context_dev 13e40000.host1x:niso0_ctx3: Adding to iommu group 17 [ 7.045105] iommu_context_dev 13e40000.host1x:niso0_ctx3: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 7.057393] iommu_context_dev 13e40000.host1x:niso0_ctx4: Adding to iommu group 18 [ 7.065372] iommu_context_dev 13e40000.host1x:niso0_ctx4: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 7.077670] iommu_context_dev 13e40000.host1x:niso0_ctx5: Adding to iommu group 19 [ 7.085623] iommu_context_dev 13e40000.host1x:niso0_ctx5: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 7.097914] iommu_context_dev 13e40000.host1x:niso0_ctx6: Adding to iommu group 20 [ 7.105886] iommu_context_dev 13e40000.host1x:niso0_ctx6: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 7.118214] iommu_context_dev 13e40000.host1x:niso0_ctx7: Adding to iommu group 21 [ 7.126196] iommu_context_dev 13e40000.host1x:niso0_ctx7: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 7.138493] iommu_context_dev 13e40000.host1x:niso1_ctx0: Adding to iommu group 22 [ 7.146518] iommu_context_dev 13e40000.host1x:niso1_ctx0: initialized (streamid=53, iommu=smmu.0x0000000008000000) [ 7.158853] iommu_context_dev 13e40000.host1x:niso1_ctx1: Adding to iommu group 23 [ 7.166834] iommu_context_dev 13e40000.host1x:niso1_ctx1: initialized (streamid=54, iommu=smmu.0x0000000008000000) [ 7.179139] iommu_context_dev 13e40000.host1x:niso1_ctx2: Adding to iommu group 24 [ 7.187121] iommu_context_dev 13e40000.host1x:niso1_ctx2: initialized (streamid=55, iommu=smmu.0x0000000008000000) [ 7.199429] iommu_context_dev 13e40000.host1x:niso1_ctx3: Adding to iommu group 25 [ 7.207416] iommu_context_dev 13e40000.host1x:niso1_ctx3: initialized (streamid=56, iommu=smmu.0x0000000008000000) [ 7.219720] iommu_context_dev 13e40000.host1x:niso1_ctx4: Adding to iommu group 26 [ 7.227697] iommu_context_dev 13e40000.host1x:niso1_ctx4: initialized (streamid=57, iommu=smmu.0x0000000008000000) [ 7.239978] iommu_context_dev 13e40000.host1x:niso1_ctx5: Adding to iommu group 27 [ 7.247950] iommu_context_dev 13e40000.host1x:niso1_ctx5: initialized (streamid=58, iommu=smmu.0x0000000008000000) [ 7.260232] iommu_context_dev 13e40000.host1x:niso1_ctx6: Adding to iommu group 28 [ 7.268198] iommu_context_dev 13e40000.host1x:niso1_ctx6: initialized (streamid=59, iommu=smmu.0x0000000008000000) [ 7.280474] iommu_context_dev 13e40000.host1x:niso1_ctx7: Adding to iommu group 29 [ 7.288481] iommu_context_dev 13e40000.host1x:niso1_ctx7: initialized (streamid=60, iommu=smmu.0x0000000008000000) [ 7.300805] falcon 15340000.vic: Adding to iommu group 30 [ 7.311256] falcon 15340000.vic: initialized [ 7.316016] falcon 15380000.nvjpg: Adding to iommu group 31 [ 7.325530] falcon 15380000.nvjpg: initialized [ 7.330251] falcon 15540000.nvjpg1: Adding to iommu group 32 [ 7.339544] falcon 15540000.nvjpg1: initialized [ 7.344360] falcon 15a50000.ofa: Adding to iommu group 33 [ 7.353219] falcon 15a50000.ofa: initialized [ 7.357778] nvdec 15480000.nvdec: Adding to iommu group 34 [ 7.370725] nvdec 15480000.nvdec: initialized [ 7.375355] tsec 15500000.tsec: Adding to iommu group 35 [ 7.385860] tsec 15500000.tsec: initialized [ 7.392892] gic 2a41000.agic-controller: GIC IRQ controller registered [ 7.410384] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 7.426683] gpio-397 (camera-control-output-low): hogged as output/low [ 7.433442] gpio-486 (camera-control-output-low): hogged as output/low [ 7.441196] gpiochip0: registered GPIOs 348 to 511 on tegra234-gpio [ 7.448550] gpiochip1: registered GPIOs 316 to 347 on tegra234-gpio-aon [ 7.455540] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 7.461950] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 7.468575] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 7.477007] tegra194-isp5 14800000.isp: Adding to iommu group 36 [ 7.485327] t194-nvcsi 13e40000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 7.494988] t194-nvcsi 13e40000.host1x:nvcsi@15a00000: initialized [ 7.501449] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e40000.host1x:nvcsi@15a00000- bound [ 7.510673] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e40000.host1x:nvcsi@15a00000- bound [ 7.520036] tegra194-vi5 13e40000.host1x:vi0@15c00000: Adding to iommu group 37 [ 7.528099] tegra194-vi5 13e40000.host1x:vi1@14c00000: Adding to iommu group 38 [ 7.536100] scare-pigeon 13e40000.host1x:vi0-thi@15f00000: context isolation disabled due to no IOMMU [ 7.546053] scare-pigeon 13e40000.host1x:vi0-thi@15f00000: initialized [ 7.552886] scare-pigeon 13e40000.host1x:vi1-thi@14f00000: context isolation disabled due to no IOMMU [ 7.562809] scare-pigeon 13e40000.host1x:vi1-thi@14f00000: initialized [ 7.569614] scare-pigeon 13e40000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 7.579568] scare-pigeon 13e40000.host1x:isp-thi@14b00000: initialized [ 7.586477] tegra-gpcdma 2600000.gpcdma: Adding to iommu group 2 [ 7.593645] tegra-gpcdma 2600000.gpcdma: GPC DMA driver register 31 channels [ 7.601150] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 7.607786] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 7.614499] serial-tegra 3100000.serial: Adding to iommu group 2 [ 7.621191] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 17, base_baud = 0) is a TEGRA_UART [ 7.631035] serial-tegra 3110000.serial: Adding to iommu group 2 [ 7.637548] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 63, base_baud = 0) is a TEGRA_UART [ 7.647215] serial-tegra 3130000.serial: Adding to iommu group 2 [ 7.653725] 3130000.serial: ttyTHS3 at MMIO 0x3130000 (irq = 64, base_baud = 0) is a TEGRA_UART [ 7.663354] serial-tegra 3140000.serial: Adding to iommu group 2 [ 7.669936] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 65, base_baud = 0) is a TEGRA_UART [ 7.696595] tegra-xusb 3610000.xhci: Firmware timestamp: 2021-12-01 05:27:10 UTC, Version: 80.03 release [ 7.706353] tegra-xusb 3610000.xhci: xHCI Host Controller [ 7.711925] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 7.720561] tegra-xusb 3610000.xhci: hcc params 0x0180ff05 hci version 0x120 quirks 0x0000000000050810 [ 7.730186] tegra-xusb 3610000.xhci: irq 220, io mem 0x03610000 [ 7.736641] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 7.745150] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.752589] usb usb1: Product: xHCI Host Controller [ 7.757599] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 7.763865] usb usb1: SerialNumber: 3610000.xhci [ 7.769349] hub 1-0:1.0: USB hub found [ 7.773240] hub 1-0:1.0: 4 ports detected [ 7.777677] tegra-xusb 3610000.xhci: xHCI Host Controller [ 7.783239] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 7.791032] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 7.798581] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 7.807083] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.814524] usb usb2: Product: xHCI Host Controller [ 7.819535] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 7.825798] usb usb2: SerialNumber: 3610000.xhci [ 7.831063] hub 2-0:1.0: USB hub found [ 7.834940] hub 2-0:1.0: 4 ports detected [ 7.858982] i2c i2c-2: Added multiplexed i2c bus 9 [ 7.864611] i2c i2c-2: Added multiplexed i2c bus 10 [ 7.869654] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 7.876676] tegra23x-oc-event soctherm-oc-event: Finished tegra23x overcurrent event probing [ 7.898555] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1535000 KHz, changing to: 1510400 KHz [ 7.912153] cpufreq: cpufreq_online: CPU4: Running at unlisted initial frequency: 1501000 KHz, changing to: 1510400 KHz [ 7.924063] tegra194-cpufreq e000000.ccplex: probed with ICC [ 7.931522] tegra194-pcie 14100000.pcie: Using GICv2m MSI allocator [ 7.939029] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 7.940016] tegra194-pcie 14100000.pcie: host bridge /pcie@14100000 ranges: [ 7.951152] tegra194-pcie 14100000.pcie: IO 0x0030100000..0x00301fffff -> 0x0030100000 [ 7.959842] tegra194-pcie 14100000.pcie: MEM 0x20a8000000..0x20afffffff -> 0x0040000000 [ 7.968558] tegra194-pcie 14100000.pcie: MEM 0x2080000000..0x20a7ffffff -> 0x2080000000 [ 7.986261] irq: IRQ284: trimming hierarchy from :interrupt-controller@f400000-1 [ 7.993932] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 284 [ 8.034557] usb 1-3: new high-speed USB device number 2 using tegra-xusb [ 8.193472] usb 1-3: New USB device found, idVendor=0424, idProduct=2517, bcdDevice= 0.02 [ 8.201900] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 8.210823] hub 1-3:1.0: USB hub found [ 8.214995] hub 1-3:1.0: 7 ports detected [ 8.518763] usb 1-3.3: new high-speed USB device number 3 using tegra-xusb [ 8.633140] usb 1-3.3: New USB device found, idVendor=2109, idProduct=2813, bcdDevice= 2.21 [ 8.641747] usb 1-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 8.649269] usb 1-3.3: Product: USB2.0 Hub [ 8.654635] usb 1-3.3: Manufacturer: VIA Labs, Inc. [ 8.662812] hub 1-3.3:1.0: USB hub found [ 8.667461] hub 1-3.3:1.0: 4 ports detected [ 9.034561] usb 1-3.3.1: new low-speed USB device number 4 using tegra-xusb [ 9.074326] tegra194-pcie 14100000.pcie: Phy link never came up [ 9.080548] tegra194-pcie 14100000.pcie: PCI host bridge to bus 0001:00 [ 9.087354] pci_bus 0001:00: root bus resource [bus 00-ff] [ 9.092993] pci_bus 0001:00: root bus resource [io 0x0000-0xfffff] (bus address [0x30100000-0x301fffff]) [ 9.102855] pci_bus 0001:00: root bus resource [mem 0x20a8000000-0x20afffffff] (bus address [0x40000000-0x47ffffff]) [ 9.113690] pci_bus 0001:00: root bus resource [mem 0x2080000000-0x20a7ffffff pref] [ 9.121628] pci 0001:00:00.0: [10de:229e] type 01 class 0x060400 [ 9.127988] pci 0001:00:00.0: PME# supported from D0 D3hot [ 9.144101] pci 0001:00:00.0: PCI bridge to [bus 01-ff] [ 9.149503] pci 0001:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 9.158631] pcieport 0001:00:00.0: Adding to iommu group 8 [ 9.164595] pcieport 0001:00:00.0: PME: Signaling with IRQ 55 [ 9.170864] pcieport 0001:00:00.0: AER: enabled with IRQ 55 [ 9.176915] pci_bus 0001:01: busn_res: [bus 01-ff] is released [ 9.183056] pci 0001:00:00.0: Removing from iommu group 8 [ 9.188623] pci_bus 0001:00: busn_res: [bus 00-ff] is released [ 9.197034] tegra194-pcie 14160000.pcie: Using GICv2m MSI allocator [ 9.204677] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 9.211857] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 9.220583] tegra194-pcie 14160000.pcie: MEM 0x2428000000..0x242fffffff -> 0x0040000000 [ 9.229340] tegra194-pcie 14160000.pcie: MEM 0x2140000000..0x2427ffffff -> 0x2140000000 [ 9.245301] usb 1-3.3.1: New USB device found, idVendor=045e, idProduct=07f8, bcdDevice= 3.00 [ 9.254092] usb 1-3.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 9.261787] usb 1-3.3.1: Product: Wired Keyboard 600 [ 9.266886] usb 1-3.3.1: Manufacturer: Microsoft [ 9.277584] input: Microsoft Wired Keyboard 600 as /devices/platform/3610000.xhci/usb1/1-3/1-3.3/1-3.3.1/1-3.3.1:1.0/0003:045E:07F8.0001/input/input0 [ 9.346553] tegra194-pcie 14160000.pcie: Link up [ 9.351779] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 9.358589] pci_bus 0004:00: root bus resource [bus 00-ff] [ 9.364238] hid-generic 0003:045E:07F8.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Wired Keyboard 600] on usb-3610000.xhci-3.3.1/input0 [ 9.377733] pci_bus 0004:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x36100000-0x361fffff]) [ 9.387918] pci_bus 0004:00: root bus resource [mem 0x2428000000-0x242fffffff] (bus address [0x40000000-0x47ffffff]) [ 9.398798] pci_bus 0004:00: root bus resource [mem 0x2140000000-0x2427ffffff pref] [ 9.406912] input: Microsoft Wired Keyboard 600 Consumer Control as /devices/platform/3610000.xhci/usb1/1-3/1-3.3/1-3.3.1/1-3.3.1:1.1/0003:045E:07F8.0002/input/input1 [ 9.422243] pci 0004:00:00.0: [10de:229c] type 01 class 0x060400 [ 9.428570] pci 0004:00:00.0: PME# supported from D0 D3hot [ 9.439847] pci 0004:01:00.0: [1d79:2263] type 00 class 0x010802 [ 9.446233] pci 0004:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 9.454772] pci 0004:01:00.0: 7.876 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x1 link at 0004:00:00.0 (capable of 15.752 Gb/s with 8.0 GT/s PCIe x2 link) [ 9.475007] pci 0004:00:00.0: BAR 14: assigned [mem 0x2428000000-0x24280fffff] [ 9.482439] pci 0004:01:00.0: BAR 0: assigned [mem 0x2428000000-0x2428003fff 64bit] [ 9.490403] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 9.495830] pci 0004:00:00.0: bridge window [mem 0x2428000000-0x24280fffff] [ 9.503233] input: Microsoft Wired Keyboard 600 System Control as /devices/platform/3610000.xhci/usb1/1-3/1-3.3/1-3.3.1/1-3.3.1:1.1/0003:045E:07F8.0002/input/input2 [ 9.518386] pci 0004:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 9.527173] pci 0004:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 512 [ 9.535858] hid-generic 0003:045E:07F8.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Wired Keyboard 600] on usb-3610000.xhci-3.3.1/input1 [ 9.549637] pcieport 0004:00:00.0: Adding to iommu group 9 [ 9.555795] pcieport 0004:00:00.0: PME: Signaling with IRQ 57 [ 9.562068] pcieport 0004:00:00.0: AER: enabled with IRQ 57 [ 9.568249] nvme 0004:01:00.0: Adding to iommu group 9 [ 9.574115] nvme nvme0: pci function 0004:01:00.0 [ 9.579060] nvme 0004:01:00.0: enabling device (0000 -> 0002) [ 9.579947] tegra194-pcie 141e0000.pcie: Using GICv2m MSI allocator [ 9.592295] nvme nvme0: missing or invalid SUBNQN field. [ 9.593053] tegra194-pcie 141e0000.pcie: host bridge /pcie@141e0000 ranges: [ 9.604968] tegra194-pcie 141e0000.pcie: IO 0x003e100000..0x003e1fffff -> 0x003e100000 [ 9.613704] tegra194-pcie 141e0000.pcie: MEM 0x3228000000..0x322fffffff -> 0x0040000000 [ 9.622385] tegra194-pcie 141e0000.pcie: MEM 0x2e40000000..0x3227ffffff -> 0x2e40000000 [ 9.623907] nvme nvme0: allocated 64 MiB host memory buffer. [ 9.652852] nvme nvme0: 6/0/0 default/read/poll queues [ 9.664634] nvme0n1: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 [ 9.694572] usb 1-3.3.2: new low-speed USB device number 5 using tegra-xusb [ 9.864128] usb 1-3.3.2: New USB device found, idVendor=046d, idProduct=c077, bcdDevice=72.00 [ 9.872911] usb 1-3.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 9.880610] usb 1-3.3.2: Product: USB Optical Mouse [ 9.885621] usb 1-3.3.2: Manufacturer: Logitech [ 9.895257] input: Logitech USB Optical Mouse as /devices/platform/3610000.xhci/usb1/1-3/1-3.3/1-3.3.2/1-3.3.2:1.0/0003:046D:C077.0003/input/input3 [ 9.909673] hid-generic 0003:046D:C077.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-3610000.xhci-3.3.2/input0 [ 10.735675] tegra194-pcie 141e0000.pcie: Phy link never came up [ 10.741860] tegra194-pcie 141e0000.pcie: PCI host bridge to bus 0007:00 [ 10.748666] pci_bus 0007:00: root bus resource [bus 00-ff] [ 10.754304] pci_bus 0007:00: root bus resource [io 0x200000-0x2fffff] (bus address [0x3e100000-0x3e1fffff]) [ 10.764404] pci_bus 0007:00: root bus resource [mem 0x3228000000-0x322fffffff] (bus address [0x40000000-0x47ffffff]) [ 10.775216] pci_bus 0007:00: root bus resource [mem 0x2e40000000-0x3227ffffff pref] [ 10.783179] pci 0007:00:00.0: [10de:229a] type 01 class 0x060400 [ 10.789509] pci 0007:00:00.0: PME# supported from D0 D3hot [ 10.805261] pci 0007:00:00.0: PCI bridge to [bus 01-ff] [ 10.810656] pci 0007:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 10.819729] pcieport 0007:00:00.0: Adding to iommu group 10 [ 10.825737] pcieport 0007:00:00.0: PME: Signaling with IRQ 59 [ 10.832039] pcieport 0007:00:00.0: AER: enabled with IRQ 59 [ 10.838108] pci_bus 0007:01: busn_res: [bus 01-ff] is released [ 10.844256] pci 0007:00:00.0: Removing from iommu group 10 [ 10.849906] pci_bus 0007:00: busn_res: [bus 00-ff] is released [ 10.857878] tegra194-pcie 140a0000.pcie: Using GICv2m MSI allocator [ 10.864750] vdd-3v3-sd: supplied by vdd-3v3 [ 10.869567] irq: IRQ292: trimming hierarchy from :pmc@c360000 [ 10.876184] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 10.878157] tegra194-isp5 14800000.isp: initialized [ 10.899547] tegra194-vi5 13e40000.host1x:vi0@15c00000: initialized [ 10.906020] (NULL device *): fops function table already registered [ 10.913352] tegra194-vi5 13e40000.host1x:vi1@14c00000: initialized [ 10.920771] tegra194-pcie 140a0000.pcie: Using GICv2m MSI allocator [ 10.920814] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 10.927825] irq: IRQ293: trimming hierarchy from :interrupt-controller@f400000-1 [ 10.954629] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 284 [ 11.047301] tegra194-pcie 140a0000.pcie: host bridge /pcie@140a0000 ranges: [ 11.054492] tegra194-pcie 140a0000.pcie: IO 0x002a100000..0x002a1fffff -> 0x002a100000 [ 11.063173] tegra194-pcie 140a0000.pcie: MEM 0x3528000000..0x352fffffff -> 0x0040000000 [ 11.071852] tegra194-pcie 140a0000.pcie: MEM 0x3240000000..0x3527ffffff -> 0x3240000000 [ 11.186760] tegra194-pcie 140a0000.pcie: Link up [ 11.193250] tegra194-pcie 140a0000.pcie: PCI host bridge to bus 0008:00 [ 11.200066] pci_bus 0008:00: root bus resource [bus 00-ff] [ 11.205705] pci_bus 0008:00: root bus resource [io 0x300000-0x3fffff] (bus address [0x2a100000-0x2a1fffff]) [ 11.215810] pci_bus 0008:00: root bus resource [mem 0x3528000000-0x352fffffff] (bus address [0x40000000-0x47ffffff]) [ 11.226637] pci_bus 0008:00: root bus resource [mem 0x3240000000-0x3527ffffff pref] [ 11.234562] pci 0008:00:00.0: [10de:229c] type 01 class 0x060400 [ 11.240892] pci 0008:00:00.0: PME# supported from D0 D3hot [ 11.252066] pci 0008:01:00.0: [10ec:8168] type 00 class 0x020000 [ 11.258393] pci 0008:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 11.264307] pci 0008:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit] [ 11.271408] pci 0008:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit] [ 11.279456] pci 0008:01:00.0: supports D1 D2 [ 11.283863] pci 0008:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 11.296134] pci 0008:00:00.0: BAR 14: assigned [mem 0x3528000000-0x35280fffff] [ 11.303565] pci 0008:00:00.0: BAR 13: assigned [io 0x300000-0x300fff] [ 11.310274] pci 0008:01:00.0: BAR 4: assigned [mem 0x3528000000-0x3528003fff 64bit] [ 11.318251] pci 0008:01:00.0: BAR 2: assigned [mem 0x3528004000-0x3528004fff 64bit] [ 11.326228] pci 0008:01:00.0: BAR 0: assigned [io 0x300000-0x3000ff] [ 11.332882] pci 0008:00:00.0: PCI bridge to [bus 01-ff] [ 11.338255] pci 0008:00:00.0: bridge window [io 0x300000-0x300fff] [ 11.344881] pci 0008:00:00.0: bridge window [mem 0x3528000000-0x35280fffff] [ 11.352237] pci 0008:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 11.360983] pci 0008:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 11.370066] pcieport 0008:00:00.0: Adding to iommu group 11 [ 11.376105] pcieport 0008:00:00.0: PME: Signaling with IRQ 61 [ 11.382432] pcieport 0008:00:00.0: AER: enabled with IRQ 61 [ 11.390371] irq: IRQ295: trimming hierarchy from :pmc@c360000 [ 11.396388] irq: IRQ296: trimming hierarchy from :interrupt-controller@f400000-1 [ 11.404085] input: gpio-keys as /devices/platform/gpio-keys/input/input4 [ 11.412014] tegra-se-nvhost 15810000.se: Adding to iommu group 39 [ 11.418798] tegra-se-nvhost 15810000.se: initialized [ 11.433784] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 11.440212] tegra-se-nvhost 15820000.se: Adding to iommu group 40 [ 11.446828] tegra-se-nvhost 15820000.se: initialized [ 11.453519] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 11.459920] tegra-se-nvhost 15840000.se: Adding to iommu group 41 [ 11.466579] tegra-se-nvhost 15840000.se: initialized [ 11.473234] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 11.480247] tegra_actmon d230000.actmon: in actmon_register()... [ 11.486605] tegra_actmon d230000.actmon: bwmgr_disable = 1 [ 11.492964] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 11.501479] hvc_sysfs: hypervisor is not present [ 11.541798] ALSA device list: [ 11.544850] No soundcards found. [ 11.549219] Freeing unused kernel memory: 4032K [ 11.553983] Run /init as init process [ 11.574440] Root device found: nvme0n1p1 [ 11.582404] Found dev node: /dev/nvme0n1p1 [ 11.610725] EXT4-fs (nvme0n1p1): 4 orphan inodes deleted [ 11.616200] EXT4-fs (nvme0n1p1): recovery complete [ 11.623867] EXT4-fs (nvme0n1p1): mounted filesystem with ordered data mode. Opts: (null) [ 11.633496] Rootfs mounted over nvme0n1p1 [ 11.647436] Switching from initrd to actual rootfs [ 11.714282] systemd[1]: System time before build time, advancing clock. [ 11.770436] systemd[1]: systemd 245.4-4ubuntu3.19 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +K) [ 11.794173] systemd[1]: Detected architecture arm64. [ 11.850712] systemd[1]: Set hostname to . [ 12.013520] mmc1: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit [ 12.031792] random: systemd: uninitialized urandom read (16 bytes read) [ 12.038693] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 12.051705] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 12.061555] systemd[1]: Created slice system-modprobe.slice. [ 12.082594] random: systemd: uninitialized urandom read (16 bytes read) [ 12.089704] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 12.110580] random: systemd: uninitialized urandom read (16 bytes read) [ 12.117697] systemd[1]: Created slice User and Session Slice. [ 12.138678] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 12.162908] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 12.186661] systemd[1]: Reached target User and Group Name Lookups. [ 12.206598] systemd[1]: Reached target Slices. [ 12.222589] systemd[1]: Reached target Mounting snaps. [ 12.242580] systemd[1]: Reached target Mounted snaps. [ 12.262586] systemd[1]: Reached target Swap. [ 12.278891] systemd[1]: Listening on RPCbind Server Activation Socket. [ 12.298723] systemd[1]: Listening on Syslog Socket. [ 12.318713] systemd[1]: Listening on fsck to fsckd communication Socket. [ 12.342654] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 12.362850] systemd[1]: Listening on Journal Audit Socket. [ 12.382699] systemd[1]: Listening on Journal Socket (/dev/log). [ 12.402738] systemd[1]: Listening on Journal Socket. [ 12.422750] systemd[1]: Listening on udev Control Socket. [ 12.442675] systemd[1]: Listening on udev Kernel Socket. [ 12.463970] systemd[1]: Mounting Huge Pages File System... [ 12.483887] systemd[1]: Mounting POSIX Message Queue File System... [ 12.507768] systemd[1]: Mounting RPC Pipe File System... [ 12.527970] systemd[1]: Mounting Kernel Debug File System... [ 12.547924] systemd[1]: Mounting Kernel Trace File System... [ 12.572115] systemd[1]: Starting Journal Service... [ 12.596172] systemd[1]: Starting Set the console keyboard layout... [ 12.624150] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 12.656014] systemd[1]: Starting Load Kernel Module chromeos_pstore... [ 12.682615] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 12.692401] systemd[1]: Starting Load Kernel Module efi_pstore... [ 12.716015] systemd[1]: Starting Load Kernel Module pstore_blk... [ 12.735852] systemd[1]: Starting Load Kernel Module pstore_zone... [ 12.759887] systemd[1]: Starting Load Kernel Module ramoops... [ 12.783819] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 12.811853] systemd[1]: Started Nameserver information manager. [ 12.834805] systemd[1]: Reached target Network (Pre). [ 12.859730] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 12.869098] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 12.880250] systemd[1]: Starting Load Kernel Modules... [ 12.889824] product: loading out-of-tree module taints kernel. [ 12.896516] product: module verification failed: signature and/or required key missing - tainting kernel [ 12.914384] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 12.921858] nvmap_page_pool_init: Total RAM pages: 1878152 [ 12.927517] nvmap_page_pool_init: nvmap page pool size: 234769 pages (917 MB) [ 12.932018] systemd[1]: Starting Remount Root and Kernel File Systems... [ 12.934924] nvmap_background_zero_thread: PP zeroing thread starting. [ 12.942046] EXT4-fs (nvme0n1p1): re-mounted. Opts: (null) [ 12.968186] systemd[1]: Starting udev Coldplug all Devices... [ 12.980419] nvgpu: 17000000.ga10b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 4000000 size 10000 [ 12.980419] [ 13.009105] systemd[1]: Started Journal Service. [ 13.307412] systemd-journald[243]: Received client request to flush runtime journal. [ 13.937499] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 13.956619] imx219 9-0010: board setup failed [ 13.961240] imx219: probe of 9-0010 failed with error -121 [ 13.993255] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 14.020337] imx219 10-0010: board setup failed [ 14.026311] imx219: probe of 10-0010 failed with error -121 [ 14.414564] random: crng init done [ 14.420240] random: 7 urandom warning(s) missed due to ratelimiting [ 15.499349] using random self ethernet address [ 15.503950] using random host ethernet address [ 15.920102] using random self ethernet address [ 15.926421] using random host ethernet address Ubuntu 20.04.5 LTS BOXER-8621AI ttyTCU0 BOXER-8621AI login: ��[ 74.634722] Camera-FW on t234-rce-safe started TCU early console enabled. [ 74.745784] Camera-FW on t234-rce-safe ready SHA1=97e50cbf (crt 1.260 ms, total boot 112.422 ms) ��[ 51.598793] CPU:0, Error: dce-fabric@0xde00000, irq=28 [ 51.598800] ************************************** [ 51.598804] CPU:0, Error:dce-fabric, Errmon:4 [ 51.598814] Error Code : SLAVE_ERR [ 51.598817] Overflow : Multiple SLAVE_ERR [ 51.598829] [ 51.598831] Error Code : SLAVE_ERR [ 51.598835] MASTER_ID : DCE [ 51.598838] Address : 0xdc9ed80 [ 51.598843] Cache : 0x3 -- Bufferable Modifiable [ 51.598848] Protection : 0x2 -- Unprivileged, Non-Secure, Data Access [ 51.598851] Access_Type : Read [ 51.598853] Access_ID : 0x0 [ 51.598857] Fabric : dce-fabric [ 51.598859] Slave_Id : 0x5 [ 51.598862] Burst_length : 0x7 [ 51.598864] Burst_type : 0x1 [ 51.598867] Beat_size : 0x3 [ 51.598869] VQC : 0x0 [ 51.598872] GRPSEC : 0x3f [ 51.598874] FALCONSEC : 0x0 [ 51.598879] ************************************** [ 51.867386] Non-boot CPUs are not disabled [ 52.452596] PM: dpm_run_callback(): platform_pm_resume+0x0/0x80 returns -110 [ 52.452603] PM: Device 3ae0000.nvrng failed to resume: error -110 [ 52.973276] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 83.430985] PM: dpm_run_callback(): nv_tegra_dce_unregister_ipc_client+0x618/0x940 [nvidia] returns -5 [ 83.430988] PM: Device 13800000.display failed to resume: error -5 [ 83.616259] nvidia-modeset: ERROR: GPU:0: Failed detecting connected display devices [ 83.624355] nvidia-modeset: ERROR: GPU:0: Failure reading maximum pixel clock value for display device HDMI-0. [ 83.663092] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000800 [ 83.672151] Mem abort info: [ 83.675032] ESR = 0x96000004 [ 83.678167] EC = 0x25: DABT (current EL), IL = 32 bits [ 83.683625] SET = 0, FnV = 0 [ 83.686767] EA = 0, S1PTW = 0 [ 83.689988] Data abort info: [ 83.692949] ISV = 0, ISS = 0x00000004 [ 83.696890] CM = 0, WnR = 0 [ 83.699945] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000125731000 [ 83.706570] [0000000000000800] pgd=0000000000000000, p4d=0000000000000000 [ 83.713564] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 83.719289] Modules linked in: nvidia_modeset(OE) fuse mttcan can_dev can_raw can lzo_rle lzo_compress zram ramoops reed_solomon loop input_leds snd_soc_tegra186_asrc snd_soc_tegra210_ope snd_soc_tegra186_ar] [ 83.805495] CPU: 3 PID: 1468 Comm: Xorg Tainted: G OE 5.10.104-tegra #2 [ 83.813520] Hardware name: Unknown NVIDIA Orin Nano Developer Kit/NVIDIA Orin Nano Developer Kit, BIOS 3.1-32827747 03/19/2023 [ 83.825203] pstate: 00400009 (nzcv daif +PAN -UAO -TCO BTYPE=--) [ 83.831403] pc : nvInitFlipEvoHwState+0x30/0xf8 [nvidia_modeset] [ 83.837591] lr : nvSetDispModeEvo+0x5e8/0x2670 [nvidia_modeset] [ 83.843652] sp : ffff800014cdb9e0 [ 83.847047] x29: ffff800014cdbd20 x28: ffff800022bad008 [ 83.852497] x27: 0000000000000000 x26: 0000000000000000 [ 83.857948] x25: ffff800022bc0c20 x24: ffff7e0d257d8008 [ 83.863399] x23: ffff80001eec7008 x22: 0000000000000000 [ 83.868838] x21: ffff80001eed0b08 x20: 0000000000000000 [ 83.874286] x19: ffff7e0d257d8008 x18: 0000000000000000 [ 83.879736] x17: 0000000000000000 x16: ffffde5f8ddaee28 [ 83.885176] x15: 0000ffffd55138a0 x14: 0000000000000000 [ 83.890619] x13: 0000000000000000 x12: 0000000000000000 [ 83.896059] x11: 0000000000000000 x10: ffff800014cdb750 [ 83.901506] x9 : 00000000ffffffe8 x8 : ffff800014cdb730 [ 83.906956] x7 : 0000000000000000 x6 : ffffde5f8de53000 [ 83.912404] x5 : 0000000000000001 x4 : 0000000000000000 [ 83.917846] x3 : ffff80001eed0b08 x2 : 0000000000000000 [ 83.923295] x1 : 0000000000000000 x0 : ffff80001eed0b08 [ 83.928748] Call trace: [ 83.931288] nvInitFlipEvoHwState+0x30/0xf8 [nvidia_modeset] [ 83.937114] nvkms_ioctl_common+0x180/0x1b0 [nvidia_modeset] [ 83.942975] nvidia_frontend_unlocked_ioctl+0x5c/0x78 [nvidia] [ 83.948971] __arm64_sys_ioctl+0xac/0xf0 [ 83.952991] el0_svc_common.constprop.0+0x80/0x1d0 [ 83.957899] do_el0_svc+0x38/0xb0 [ 83.961297] el0_svc+0x1c/0x30 [ 83.964429] el0_sync_handler+0xa8/0xb0 [ 83.968360] el0_sync+0x16c/0x180 [ 83.971752] Code: f9001bfe f9422c01 aa0303e0 8b160021 (f9440038) [ 83.978008] ---[ end trace 3d233f37c42648b4 ]--- [ 83.988250] Kernel panic - not syncing: Oops: Fatal exception [ 83.994136] SMP: stopping secondary CPUs [ 83.998157] Kernel Offset: 0x5e5f7e9e0000 from 0xffff800010000000 [ 84.004403] PHYS_OFFSET: 0xffff81f400000000 [ 84.008690] CPU features: 0x0040006,4a80aa38 [ 84.013070] Memory Limit: none [ 84.021649] ---[ end Kernel panic - not syncing: Oops: Fatal exception ]--- CTRL-A Z for help | 115200 8N1 | NOR | Minicom 2.7.1 | VT102 | Offline | ttyUSB0