[ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.9.299-tegra (buildbrain@mobile-u64-5494-d8000) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Tue Nov 22 09:24:30 PST 2022 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 80, [ 0.000000] OF: fdt: - 80000000 , 70000000 [ 0.000000] OF: fdt: - f0200000 , 185600000 [ 0.000000] OF: fdt: - 275e00000 , 200000 [ 0.000000] OF: fdt: - 276600000 , 200000 [ 0.000000] OF: fdt: - 277000000 , 200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] Found tegra_fbmem2: 00800000@96088000 [ 0.000000] Found lut_mem2: 00002008@96085000 [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fc000000 [ 0.000000] On node 0 totalpages: 2053117 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 521725 pages, LIFO batch:31 [ 0.000000] Normal zone: 24008 pages used for memmap [ 0.000000] Normal zone: 1531392 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 24 pages/cpu s57624 r8192 d32488 u98304 [ 0.000000] pcpu-alloc: s57624 r8192 d32488 u98304 alloc=24*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2020917 [ 0.000000] Kernel command line: console=ttyS0,115200 androidboot.presilicon=true firmware_class.path=/etc/firmware root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 video=tegrafb earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt rootfs.slot_suffix= tegra_fbmem2=0x800000@0x96088000 lut_mem2=0x2008@0x96085000 usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 no_console_suspend boot.slot_suffix= boot.ratchetvalues=0.2031647.1 vpr_resize bl_prof_dataptr=0x10000@0x275840000 sdhci_tegra.en_boot_part_access=1 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 29696(90%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 7269272K/8212468K available (15422K kernel code, 2970K rwdata, 6712K rodata, 8640K init, 614K bss, 189532K reserved, 753664K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f90000 ( 15424 KB) [ 0.000000] .rodata : 0xffffff8008f90000 - 0xffffff8009630000 ( 6784 KB) [ 0.000000] .init : 0xffffff8009630000 - 0xffffff8009ea0000 ( 8640 KB) [ 0.000000] .data : 0xffffff8009ea0000 - 0xffffff800a186808 ( 2971 KB) [ 0.000000] .bss : 0xffffff800a186808 - 0xffffff800a22032c ( 615 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf07dc8000 ( 125 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc1f7200000 ( 8050 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000003] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.001627] Console: colour dummy device 80x25 [ 0.001633] console [tty0] enabled [ 0.001636] bootconsole [uart8250] disabled [ 0.001643] kmemleak: Kernel memory leak detector disabled [ 0.001652] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.001660] pid_max: default: 32768 minimum: 301 [ 0.001967] Security Framework initialized [ 0.002121] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.002126] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.002737] ftrace: allocating 47250 entries in 185 pages [ 0.125775] sched-energy: Sched-energy-costs installed from DT [ 0.125785] ASID allocator initialised with 65536 entries [ 0.164186] tegra-id: chipid=21817. [ 0.164192] tegra-id: opt_subrevision=1. [ 0.164209] Tegra Revision: A02p SKU: 0xdc CPU Process: 0 SoC Process: 0 [ 0.164217] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/quill/kernel-dts/tegra186-quill-p3310-1000-c03-00-base.dts [ 0.164222] DTB Build time: Nov 22 2022 09:27:05 [ 0.214717] CPU1: Booted secondary processor [4e0f0030] [ 0.246132] CPU2: Booted secondary processor [4e0f0030] [ 0.277156] CPU3: Booted secondary processor [411fd073] [ 0.309123] CPU4: Booted secondary processor [411fd073] [ 0.341124] CPU5: Booted secondary processor [411fd073] [ 0.341180] Brought up 6 CPUs [ 0.341184] SMP: Total of 6 processors activated. [ 0.341189] CPU features: detected feature: 32-bit EL0 Support [ 0.343379] CPU: All CPU(s) started at EL2 [ 0.343519] alternatives: patching kernel code [ 0.346264] devtmpfs: initialized [ 0.386084] Initilizing CustomIPI irq domain [ 0.386229] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.386239] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.394850] pinctrl core: initialized pinctrl subsystem [ 0.395078] OS set in device tree is not L4T. [ 0.395281] regulator-dummy: no parameters [ 0.395420] Initializing plugin-manager [ 0.395479] Plugin module not found [ 0.395516] Plugin-manager status disabled [ 0.397506] NET: Registered protocol family 16 [ 0.398544] pstore: using zlib compression [ 0.398558] console [pstore-1] enabled [ 0.398560] pstore: Registered ramoops as persistent store backend [ 0.398564] ramoops: attached 0x200000@0x275880000, ecc: 0/0 [ 0.416698] cpuidle: using governor menu [ 0.418235] bpmp: waiting for handshake [ 0.418239] bpmp: handshake completed [ 0.418253] bpmp: synchronizing channels [ 0.418270] bpmp: channels synchronized [ 0.418273] bpmp: mail init ok [ 0.420420] arm-smmu 12000000.iommu: probing hardware configuration... [ 0.420426] arm-smmu 12000000.iommu: SMMUv2 with: [ 0.420430] arm-smmu 12000000.iommu: stage 1 translation [ 0.420433] arm-smmu 12000000.iommu: stage 2 translation [ 0.420436] arm-smmu 12000000.iommu: nested translation [ 0.420443] arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80 [ 0.420448] arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)! [ 0.420452] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 0.420457] arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA [ 0.420460] arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA [ 0.422748] vdso: 2 pages (1 code @ ffffff8008f97000, 1 data @ ffffff8009ea4000) [ 0.422762] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.424940] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.427080] Registering BPMP clocks... [ 0.427178] tegra_bpmp_clk_init: clock init ok (638 clks) [ 0.428167] Serial: AMBA PL011 UART driver [ 0.429304] tegra_powergate_init: DONE [ 0.429311] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/quill/kernel-dts/tegra186-quill-p3310-1000-c03-00-base.dts [ 0.429316] DTB Build time: Nov 22 2022 09:27:05 [ 0.431467] Tegra reboot handler registered. [ 0.433049] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.433116] tegra-pmc: get_secure_pmc_setting: done secure_pmc=0 [ 0.433129] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET [ 0.433131] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L0 [ 0.433134] tegra-pmc: ### PMC reset status reg: 0x0 [ 0.433288] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.433299] tegra-pmc c360000.pmc: IO padctrl driver initialized [ 0.433629] iommu: Adding device 3460000.sdhci to group 0 [ 0.434308] iommu: Adding device 3400000.sdhci to group 1 [ 0.435343] iommu: Adding device 3507000.ahci-sata to group 2 [ 0.435363] arm-smmu: forcing sodev map for 3507000.ahci-sata [ 0.435816] iommu: Adding device 3160000.i2c to group 3 [ 0.436242] iommu: Adding device c240000.i2c to group 4 [ 0.436593] iommu: Adding device 3180000.i2c to group 5 [ 0.436967] iommu: Adding device 3190000.i2c to group 6 [ 0.437398] iommu: Adding device 31b0000.i2c to group 7 [ 0.437742] iommu: Adding device 31c0000.i2c to group 8 [ 0.438080] iommu: Adding device c250000.i2c to group 9 [ 0.438414] iommu: Adding device 31e0000.i2c to group 10 [ 0.439901] iommu: Adding device 3210000.spi to group 11 [ 0.440243] iommu: Adding device c260000.spi to group 12 [ 0.440577] iommu: Adding device 3240000.spi to group 13 [ 0.441311] iommu: Adding device 3100000.serial to group 14 [ 0.441659] iommu: Adding device 3110000.serial to group 15 [ 0.441995] iommu: Adding device c280000.serial to group 16 [ 0.442339] iommu: Adding device 3130000.serial to group 17 [ 0.443708] iommu: Adding device 2490000.ether_qos to group 18 [ 0.443719] arm-smmu: forcing sodev map for 2490000.ether_qos [ 0.444611] iommu: Adding device b000000.rtcpu to group 19 [ 0.446877] iommu: Adding device 13e10000.host1x to group 20 [ 0.447188] iommu: Adding device 13e10000.host1x:ctx0 to group 21 [ 0.447491] iommu: Adding device 13e10000.host1x:ctx1 to group 22 [ 0.447798] iommu: Adding device 13e10000.host1x:ctx2 to group 23 [ 0.448097] iommu: Adding device 13e10000.host1x:ctx3 to group 24 [ 0.448398] iommu: Adding device 13e10000.host1x:ctx4 to group 25 [ 0.448742] iommu: Adding device 13e10000.host1x:ctx5 to group 26 [ 0.449049] iommu: Adding device 13e10000.host1x:ctx6 to group 27 [ 0.449359] iommu: Adding device 13e10000.host1x:ctx7 to group 28 [ 0.449833] iommu: Adding device 150c0000.nvcsi to group 29 [ 0.450483] iommu: Adding device 15700000.vi to group 30 [ 0.450841] iommu: Adding device 15600000.isp to group 31 [ 0.451066] iommu: Adding device 15200000.dc_common to group 32 [ 0.451173] platform 15200000.dc_common: OF IOVA linear map 0x96088000 size (0x800000) [ 0.451205] platform 15200000.dc_common: OF IOVA linear map 0x96085000 size (0x2008) [ 0.451715] iommu: Adding device 15210000.nvdisplay to group 33 [ 0.452068] iommu: Adding device 15340000.vic to group 34 [ 0.452293] iommu: Adding device 154c0000.nvenc to group 35 [ 0.452520] iommu: Adding device 15480000.nvdec to group 36 [ 0.452900] iommu: Adding device 15380000.nvjpg to group 37 [ 0.453119] iommu: Adding device 15500000.tsec to group 38 [ 0.453336] iommu: Adding device 15100000.tsecb to group 39 [ 0.454021] iommu: Adding device 15810000.se to group 40 [ 0.454236] iommu: Adding device 15820000.se to group 41 [ 0.454449] iommu: Adding device 15830000.se to group 42 [ 0.454668] iommu: Adding device 15840000.se to group 43 [ 0.455549] iommu: Adding device smmu_test to group 44 [ 0.456160] mc: mapped MMIO address: 0xffffff800a710000 -> 0x2c10000 [ 0.456171] mc: mapped MMIO address: 0xffffff800a730000 -> 0x2c20000 [ 0.456181] mc: mapped MMIO address: 0xffffff800a750000 -> 0x2c30000 [ 0.456191] mc: mapped MMIO address: 0xffffff800a770000 -> 0x2c40000 [ 0.456200] mc: mapped MMIO address: 0xffffff800a790000 -> 0x2c50000 [ 0.456208] nv-tegra-mc 2c10000.mc: No mssnvlink node [ 0.456217] mc-err: mcerr ops are set to t18x [ 0.456367] dram-ecc: DRAM ECC disabled-MC_ECC_CONTROL:0x0000000c [ 0.457530] iommu: Adding device 3530000.xhci to group 45 [ 0.457543] arm-smmu: forcing sodev map for 3530000.xhci [ 0.457993] iommu: Adding device 3550000.xudc to group 46 [ 0.458003] arm-smmu: forcing sodev map for 3550000.xudc [ 0.458702] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_83 = 0x10a [ 0.458708] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3 [ 0.458713] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256 [ 0.459352] iommu: Adding device 17000000.gp10b to group 47 [ 0.460401] tegra-reset 5000000.clock: registered 193 resets. [ 0.462739] iommu: Adding device d000000.bpmp to group 48 [ 0.462934] bpmp: ping status is 0 [ 0.463032] bpmp d000000.bpmp: firmware tag is 91572a54614f84d0fd0c270beec2c56f [ 0.465476] bpmp d000000.bpmp: probe ok [ 0.468661] iommu: Adding device 2600000.dma to group 49 [ 0.469624] gpio gpiochip0: gpio-line-names specifies 180 line names but there are 192 lines on the chip [ 0.470132] GPIO line 461 (camera-control-output-low) hogged as output/low [ 0.470163] GPIO line 456 (camera-control-output-low) hogged as output/low [ 0.470193] GPIO line 457 (camera-control-output-low) hogged as output/low [ 0.470222] GPIO line 426 (camera-control-output-low) hogged as output/low [ 0.470252] GPIO line 424 (wifi-enable) hogged as output/high [ 0.470282] GPIO line 445 (sdmmc-wake-support-input) hogged as input [ 0.470311] GPIO line 446 (sdmmc-wake-support-output) hogged as output/low [ 0.470478] gpiochip_setup_dev: registered GPIOs 320 to 511 on device: gpiochip0 (tegra-gpio) [ 0.474048] gpio gpiochip1: gpio-line-names specifies 60 line names but there are 64 lines on the chip [ 0.474162] GPIO line 315 (wifi-wake-ap) hogged as input [ 0.474301] gpiochip_setup_dev: registered GPIOs 256 to 319 on device: gpiochip1 (tegra-gpio-aon) [ 0.475912] iommu: Adding device 10003000.pcie-controller to group 50 [ 0.475927] arm-smmu: forcing sodev map for 10003000.pcie-controller [ 0.476261] iommu: Adding device sound to group 51 [ 0.476624] iommu: Adding device 3510000.hda to group 52 [ 0.484115] iommu: Adding device c1a0000.aon to group 53 [ 0.484557] vdd-ac-bat: 5000 mV [ 0.486240] vdd-1v8-ap: 1800 mV [ 0.502154] random: fast init done [ 0.513602] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.516252] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.516434] SCSI subsystem initialized [ 0.516526] libata version 3.00 loaded. [ 0.516711] usbcore: registered new interface driver usbfs [ 0.516779] usbcore: registered new interface driver hub [ 0.516809] usbcore: registered new device driver usb [ 0.520064] GPIO line 241 (touch-rails) hogged as output/high [ 0.520471] GPIO line 242 (touch-rails) hogged as output/high [ 0.520634] gpiochip_setup_dev: registered GPIOs 240 to 255 on device: gpiochip2 (tca9539) [ 0.521966] GPIO line 228 (lcd-bias-rails) hogged as output/high [ 0.522091] gpiochip_setup_dev: registered GPIOs 224 to 239 on device: gpiochip3 (tca9539) [ 0.531874] max77620 4-003c: PMIC Version OTP:0x45 and ES:0x8 [ 0.537288] vddio-ddr: at 1125 mV [ 0.541137] avdd_dsi_csi: 1200 mV [ 0.545135] vdd-1v8: 1800 mV [ 0.549135] vdd-3v3-sys: 3300 mV [ 0.550251] spmic-ldo0: at 1800 mV [ 0.550955] spmic-ldo1: at 800 mV [ 0.553136] vddio-3v3: 3300 mV [ 0.553732] vddio-sdmmc1: 1800 <--> 3300 mV at 3300 mV [ 0.557137] vdd-rtc: at 800 mV [ 0.557862] avdd-ts-hv: 1800 <--> 3300 mV at 1800 mV [ 0.561135] spmic-ldo6: at 1500 mV [ 0.565136] vdd-pex-1v00: 1000 mV [ 0.565743] dvdd-pex: 1000 mV [ 0.567872] GPIO line 221 (spmic_gpio_input) hogged as input [ 0.568019] GPIO line 222 (spmic_gpio_input) hogged as input [ 0.568164] gpiochip_setup_dev: registered GPIOs 216 to 223 on device: gpiochip4 (max77620-gpio) [ 0.568338] max77620 4-003c: max77620 probe successful [ 0.568718] media: Linux media interface: v0.10 [ 0.568747] Linux video capture interface: v2.00 [ 0.571243] pps_core: LinuxPPS API ver. 1 registered [ 0.571246] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.571267] PTP clock support registered [ 0.571501] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.571708] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.571726] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.573083] trusty trusty: trusty version: Built: 09:23:15 Nov 22 2022 [ 0.573099] trusty trusty: selected api version: 3 (requested 3) [ 0.573966] Advanced Linux Sound Architecture Driver Initialized. [ 0.574280] Bluetooth: Core ver 2.22 [ 0.574306] NET: Registered protocol family 31 [ 0.574309] Bluetooth: HCI device and connection manager initialized [ 0.574315] Bluetooth: HCI socket layer initialized [ 0.574319] Bluetooth: L2CAP socket layer initialized [ 0.574334] Bluetooth: SCO socket layer initialized [ 0.575073] en-vdd-sd: 3300 mV [ 0.575796] en-vdd-cam: 1800 mV [ 0.577162] vdd-hdmi: 5000 mV [ 0.577477] vdd-usb0-5v: 5000 mV [ 0.577753] vdd-usb1-5v: 5000 mV [ 0.581137] en-vdd-ts-1v8: 1800 mV [ 0.585157] en-vdd-ts-hv-3v3: 3300 mV [ 0.585820] en-vdd-disp-3v3: 3300 mV [ 0.586494] en-mdm-pwr-3v7: 3700 mV [ 0.587154] en-vdd-disp-1v8: 1800 mV [ 0.587825] en-vdd-cam-hv-2v8: 2800 mV [ 0.588494] en-vdd-cam-1v2: 1200 mV [ 0.589175] vdd-fan: 5000 mV [ 0.589422] vdd-3v3: 3300 mV [ 0.590321] dis-vdd-1v2: 1200 mV [ 0.590572] en-vdd-vcm-2v8: 2800 mV [ 0.591255] vdd-usb2-5v: 5000 mV [ 0.591508] vdd-sys-bl: 3300 mV [ 0.592203] en-vdd-sys: 1200 mV [ 0.594403] camchar: rtcpu character device driver loaded [ 0.594931] gpio tegra-gpio wake53 for gpio=159(X:7) [ 0.596573] extcon-gpio-states external-connection:extcon@1: Cable state:0, cable id:0 [ 0.597517] clocksource: Switched to clocksource arch_sys_counter [ 0.619855] VFS: Disk quotas dquot_6.6.0 [ 0.619928] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.620164] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.620676] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000c6000000, size=0x2a000000 [ 0.620783] cma: enabled page replacement for spfn=c6000, epfn=f0000 [ 0.620787] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 0.620805] nvmap: nvmap_select_cache_ops() nvmap cache ops set to roc [ 0.620809] nvmap_page_pool_init: Total RAM pages: 2005734 [ 0.620812] nvmap_page_pool_init: nvmap page pool size: 250716 pages (979 MB) [ 0.620863] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.621309] misc nvmap: created heap vpr base 0x00000000c6000000 size (688128KiB) [ 0.623636] tegra-gpcdma 2600000.dma: GPC DMA driver register 32 channels [ 0.630068] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type BCPU-therm [ 0.630301] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type MCPU-therm [ 0.630734] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.630809] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.630908] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type Tboard_tegra [ 0.631007] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type Tdiode_tegra [ 0.631160] thermal thermal_zone6: Registering thermal zone thermal_zone6 for type PMIC-Die [ 0.631360] la/ptsa driver initialized. [ 0.631369] pre_t19x_iso_plat_init(): iso emc max clk=1866000KHz [ 0.631371] pre_t19x_iso_plat_init(): max_iso_bw=26870400KB [ 0.631657] NET: Registered protocol family 2 [ 0.631726] IP idents hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.634396] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.634700] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.635290] TCP: Hash tables configured (established 65536 bind 65536) [ 0.635338] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.635453] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.635754] NET: Registered protocol family 1 [ 0.636059] RPC: Registered named UNIX socket transport module. [ 0.636062] RPC: Registered udp transport module. [ 0.636065] RPC: Registered tcp transport module. [ 0.636067] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.636073] PCI: CLS 0 bytes, default 64 [ 0.636184] Trying to unpack rootfs image as initramfs... [ 0.843732] Freeing initrd memory: 7068K [ 0.859717] host1x 13e10000.host1x: initialized [ 0.861175] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.863358] audit: initializing netlink subsys (disabled) [ 0.863392] audit: type=2000 audit(0.752:1): initialized [ 0.863790] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.870385] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.871313] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.871809] 9p: Installing v9fs 9p2000 file system support [ 0.873852] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.873908] io scheduler noop registered [ 0.874107] io scheduler cfq registered (default) [ 0.877347] gic 2a41000.agic-controller: GIC IRQ controller registered [ 0.980289] iommu: Adding device aconnect@2a41000:adsp_audio to group 54 [ 1.013750] iommu: Adding device 2993000.adsp to group 55 [ 1.014787] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 1.017371] tegra-xusb-padctl 3520000.xusb_padctl: VBUS over-current detection enabled [ 1.021025] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.022196] tegra-pwm 3290000.pwm: PWM clk can sleep in ops [ 1.023263] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 1.024332] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.026740] tegra-pcie 10003000.pcie-controller: 4x1, 1x1 configuration [ 1.027694] tegra-pcie 10003000.pcie-controller: PCIE: Enable power rails [ 1.028031] tegra-pcie 10003000.pcie-controller: probing port 0, using 4 lanes [ 1.028108] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 1.028211] misc tegra_camera_ctrl: tegra_camera_isomgr_register tpg_max_iso = 3916800KBs [ 1.028216] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=4687500, vi_iso_bw=1500000, max_bw=4687500 [ 1.030484] tegra-pcie 10003000.pcie-controller: probing port 2, using 1 lanes [ 1.031744] tsec 15500000.tsec: initialized [ 1.032811] tsec 15100000.tsecb: initialized [ 1.036400] nvdec 15480000.nvdec: initialized [ 1.042495] falcon 15340000.vic: initialized [ 1.043801] falcon 154c0000.nvenc: initialized [ 1.044977] falcon 15380000.nvjpg: initialized [ 1.046807] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56) [ 1.048175] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57) [ 1.049513] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58) [ 1.050830] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59) [ 1.052126] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60) [ 1.053448] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61) [ 1.054791] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62) [ 1.056121] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63) [ 1.059539] tegradccommon 15200000.dc_common: host1x channel mapped [ 1.059550] tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated [ 1.059576] tegradccommon 15200000.dc_common: dma mapping done [ 1.059753] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=391 [ 1.059819] tegra_cec 3960000.tegra_cec: Unpowergate DISP: 0. [ 1.060011] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 1.060025] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 1.060105] tegradc 15210000.nvdisplay: disp0 connected to head1->/host1x/sor1 [ 1.060150] generic_infoframe_type: 0x87 [ 1.060175] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 1.060178] tegra_cec 3960000.tegra_cec: probed [ 1.060248] tegradc 15210000.nvdisplay: DT parsed successfully [ 1.060265] tegradc 15210000.nvdisplay: Display dc.ffffff800abe0000 registered with id=0 [ 1.067984] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 16727000 KB/s [ 1.067988] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 665600000 Hz [ 1.067991] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 357620000 Hz [ 1.068189] tegradc 15210000.nvdisplay: vblank syncpt # 8 for dc 1 [ 1.068194] tegradc 15210000.nvdisplay: vpulse3 syncpt # 9 for dc 1 [ 1.069563] tegradc 15210000.nvdisplay: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 1.072443] tegradc 15210000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board [ 1.072448] tegradc 15210000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 1.075060] tegradc 15210000.nvdisplay: probed [ 1.075849] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 32 channels [ 1.076650] tegra-fuse-burn 3820000.efuse:efuse-burn: shutdown limit check disabled [ 1.076679] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized [ 1.077124] kfuse 3830000.kfuse: initialized [ 1.078543] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 1.081758] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.084117] console [ttyS0] disabled [ 1.084155] 3100000.serial: ttyS0 at MMIO 0x3100000 (irq = 36, base_baud = 25500000) is a Tegra [ 1.084191] console [ttyS0] enabled [ 1.085564] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 37, base_baud = 0) is a TEGRA_UART [ 1.086454] Console: switching to colour frame buffer device 240x67 [ 1.086493] c280000.serial: ttyTHS2 at MMIO 0xc280000 (irq = 38, base_baud = 0) is a TEGRA_UART [ 1.086540] tegradc 15210000.nvdisplay: fb registered [ 1.086665] serial-tegra 3130000.serial: RX in PIO mode [ 1.086690] gpio tegra-gpio wake21 for gpio=121(P:1) [ 1.087368] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 1.087606] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 1.087647] 3130000.serial: ttyTHS3 at MMIO 0x3130000 (irq = 39, base_baud = 0) is a TEGRA_UART [ 1.087663] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 1.088718] [drm] Initialized [ 1.095223] Parent Clock set for DC plld2 [ 1.096462] brd: module loaded [ 1.099979] loop: module loaded [ 1.100056] tegra_profiler: version: 1.145, samples/io: 49/28 [ 1.100158] tegra_profiler: auth: init [ 1.100494] nct1008_nct72 7-004c: starting parse dt [ 1.100587] nct1008_nct72 7-004c: !!!Found deprecated property!!! [ 1.100591] nct1008_nct72 7-004c: success parsing dt [ 1.100701] nct1008_nct72 7-004c: success in enabling tmp451 VDD rail [ 1.101450] THERMAL EST: found 3 subdevs [ 1.101454] THERMAL EST num_resources: 0 [ 1.101458] [THERMAL EST subdev 0] [ 1.101463] [THERMAL EST subdev 1] [ 1.101535] [THERMAL EST subdev 2] [ 1.101794] thermal thermal_zone7: Registering thermal zone thermal_zone7 for type thermal-fan-est [ 1.101797] THERMAL EST: thz register success. [ 1.101883] THERMAL EST: end of probe, return err: 0 [ 1.102521] sd: No Scsi addr parsed to reserve index [ 1.102543] hisi_sas: driver version v1.6 [ 1.106201] tegra-ahci 3507000.ahci-sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode [ 1.106208] tegra-ahci 3507000.ahci-sata: flags: 64bit ncq sntf pm led pmp pio slum part deso sadm apst [ 1.106916] scsi host0: tegra_ahci [ 1.107286] scsi host1: tegra_ahci [ 1.107421] ata1: SATA max UDMA/133 mmio [mem 0x03507000-0x03508fff] port 0x100 irq 24 [ 1.107424] ata2: DUMMY [ 1.113305] tun: Universal TUN/TAP device driver, 1.6 [ 1.113310] tun: (C) 1999-2004 Max Krasnyansky [ 1.114040] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.114043] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.114081] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.114083] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.114116] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 1.114118] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.114149] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k [ 1.114151] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 1.129572] eqos 2490000.ether_qos: can't get pllrefe_vcoout clk (-2) [ 1.132014] eqos 2490000.ether_qos: failed to read eqos_auto_cal_config_0_reg [ 1.132489] eqos 2490000.ether_qos: Setting local MAC: 0 4 4b 8c 5e d [ 1.132519] Using phyrst_lpmode = 0 from DT [ 1.132886] bcm54xx_low_power_mode(): put phy in iddq-lp mode [ 1.134845] PPP generic driver version 2.4.2 [ 1.134964] PPP BSD Compression module registered [ 1.134967] PPP Deflate Compression module registered [ 1.134981] PPP MPPE Compression module registered [ 1.134985] NET: Registered protocol family 24 [ 1.135022] usbcore: registered new interface driver r8152 [ 1.135050] usbcore: registered new interface driver asix [ 1.135077] usbcore: registered new interface driver ax88179_178a [ 1.135103] usbcore: registered new interface driver cdc_ether [ 1.135129] usbcore: registered new interface driver net1080 [ 1.135151] usbcore: registered new interface driver cdc_subset [ 1.135174] usbcore: registered new interface driver zaurus [ 1.135206] usbcore: registered new interface driver cdc_ncm [ 1.135319] VFIO - User Level meta-driver version: 0.3 [ 1.135412] nct1008_nct72 7-004c: LOC shutdown limit 107 [ 1.135766] nct1008_nct72 7-004c: EXT shutdown limit 107 [ 1.136279] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.136290] ehci-pci: EHCI PCI platform driver [ 1.136332] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.136338] ohci-pci: OHCI PCI platform driver [ 1.136369] ohci-platform: OHCI generic platform driver [ 1.141430] tegra-xusb 3530000.xhci: USB2 port 0 has OTG_CAP [ 1.143114] tegra-xusb 3530000.xhci: extcon 0: ffffffc1eb34b800 id [ 1.143967] usbcore: registered new interface driver uas [ 1.144022] usbcore: registered new interface driver usb-storage [ 1.144118] usbcore: registered new interface driver usbserial [ 1.145497] tegra-xusb 3530000.xhci: Firmware timestamp: 2020-07-06 13:39:28 UTC, Version: 55.18 release [ 1.148601] tegra-xudc-new 3550000.xudc: device count: 1 [ 1.149803] tegra-xudc-new 3550000.xudc: vbus state: 0 [ 1.149822] tegra-xudc-new 3550000.xudc: entering ELPG [ 1.151086] tegra-xudc-new 3550000.xudc: entering ELPG done [ 1.151320] mousedev: PS/2 mouse device common for all mice [ 1.151370] usbcore: registered new interface driver xpad [ 1.160090] tegradc 15210000.nvdisplay: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 1.160558] tegradc 15210000.nvdisplay: hdmi: get RGB quant from REG programmed by BL. [ 1.160567] tegradc 15210000.nvdisplay: hdmi: get YCC quant from REG programmed by BL. [ 1.171674] nct1008_nct72 7-004c: initial LOC temp: 35000 [ 1.171980] nct1008_nct72 7-004c: initial EXT temp: 48250 [ 1.172586] nct1008_nct72 7-004c: hi_b:-11, lo_b:0 [ 1.172885] gpio tegra-gpio-aon wake35 for gpio=16(V:0) [ 1.173073] nct1008_nct72 7-004c: nct1008_probe: initialized [ 1.174041] tegra-xusb 3530000.xhci: xHCI Host Controller [ 1.174059] tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 1 [ 1.174776] tegra-xusb 3530000.xhci: hcc params 0x0184fd25 hci version 0x100 quirks 0x00050810 [ 1.174806] tegra-xusb 3530000.xhci: irq 71, io mem 0x03530000 [ 1.174939] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.174944] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.174947] usb usb1: Product: xHCI Host Controller [ 1.174951] usb usb1: Manufacturer: Linux 4.9.299-tegra xhci-hcd [ 1.174954] usb usb1: SerialNumber: 3530000.xhci [ 1.175280] hub 1-0:1.0: USB hub found [ 1.175309] hub 1-0:1.0: 4 ports detected [ 1.175646] tegra-xusb 3530000.xhci: xHCI Host Controller [ 1.175654] tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 2 [ 1.175779] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.175783] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.175787] usb usb2: Product: xHCI Host Controller [ 1.175790] usb usb2: Manufacturer: Linux 4.9.299-tegra xhci-hcd [ 1.175793] usb usb2: SerialNumber: 3530000.xhci [ 1.176071] hub 2-0:1.0: USB hub found [ 1.176095] hub 2-0:1.0: 3 ports detected [ 1.176542] Wake76 for irq=199 [ 1.176545] Wake77 for irq=199 [ 1.176547] Wake78 for irq=199 [ 1.176548] Wake79 for irq=199 [ 1.176550] Wake80 for irq=199 [ 1.176552] Wake81 for irq=199 [ 1.176554] Wake82 for irq=199 [ 1.176578] tegra-xusb 3530000.xhci: Upgrade port 0 to USB3.0 [ 1.176583] tegra-xusb 3530000.xhci: Upgrade port 1 to USB3.0 [ 1.186791] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 1.186794] Extcon AUX1(HDMI) enable [ 1.277634] usb usb2: usb_suspend_both: status 0 [ 1.278842] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 1.279976] Wake73 for irq=42 [ 1.281222] rtc rtc1: alarm rtc device [ 1.281232] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ 1.281247] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 1.281412] i2c /dev entries driver [ 1.283366] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 1.288236] parse_throttle_dt_data: Num cap clks = 4 [ 1.288241] parse_throttle_dt_data: clk=mcpu type=1 [ 1.288244] parse_throttle_dt_data: clk=bcpu type=2 [ 1.288250] parse_throttle_dt_data: clk=gpu type=4 [ 1.288253] parse_throttle_dt_data: clk=emc type=3 [ 1.289250] tegra_throttle_probe: probe successful. #cdevs=4 [ 1.289858] FAN dev name: pwm-fan [ 1.289922] FAN:gpio request success. [ 1.289930] FAN: can't find tach_gpio [ 1.289950] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255 [ 1.290132] pwm_fan_driver pwm-fan: got pwm for fan. polarity is inversed [ 1.290137] pwm_fan_driver pwm-fan: tach period: 1000 [ 1.290720] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 1.290724] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2 [ 1.290728] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2 [ 1.290732] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2 [ 1.290736] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 1.290739] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 1.290743] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 1.290747] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 1.290750] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 1.290754] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 1.291321] tegra-oc-event d280000.soctherm-oc-event: OC driver initialized [ 1.292292] device-mapper: uevent: version 1.0.3 [ 1.292728] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.292998] CPU EMC frequency mapping table: from device tree [ 1.297187] cpufreq: platform driver Initialization: pass [ 1.297805] cpuidle: Initializing cpuidle driver init for Denver cluster [ 1.297923] cpuidle: Initializing cpuidle driver init for A57 cluster [ 1.298718] sdhci: Secure Digital Host Controller Interface driver [ 1.298720] sdhci: Copyright(c) Pierre Ossman [ 1.298722] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.299933] sdhci-tegra 3460000.sdhci: Client registration for eMC Successful [ 1.301686] CMDQ: cmdq_platfm_init successful [ 1.302671] CQE: CMD_TIMING bit set for R1B DCMD [ 1.305188] sdhci-tegra 3440000.sdhci: Client registration for eMC Successful [ 1.307562] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 1.307614] sdhci-tegra 3400000.sdhci: Got WP GPIO [ 1.308235] sdhci-tegra 3400000.sdhci: Client registration for eMC Successful [ 1.309959] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 258 [ 1.313595] tegra-se-nvhost 15810000.se: initialized [ 1.314666] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 1.315287] tegra-se-nvhost 15820000.se: initialized [ 1.316247] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 1.316795] tegra-se-nvhost 15830000.se: initialized [ 1.317588] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 1.318115] tegra-se-nvhost 15840000.se: initialized [ 1.318973] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 1.319712] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 1.319850] hidraw: raw HID events driver (C) Jiri Kosina [ 1.321914] tegradc 15210000.nvdisplay: blank - powerdown [ 1.322038] usbcore: registered new interface driver usbhid [ 1.322039] usbhid: USB HID core driver [ 1.325125] ashmem: initialized [ 1.327830] tegra186-cam-rtcpu b000000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 1.329916] tegra-ivc ivc-b000000.rtcpu: region 0: iova=0xbfef0000-0xbfefdb7f size=56192 [ 1.330149] tegra-ivc ivc-b000000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 1.330267] tegra-ivc ivc-b000000.rtcpu:i2c@480: i2c: ver=0 grp=1 RX[8x128]=0x1900-0x1d80 TX[8x128]=0x1d80-0x2200 [ 1.330452] tegra-ivc ivc-b000000.rtcpu:vinotify@12c0: vinotify: ver=0 grp=1 RX[64x128]=0x2200-0x4280 TX[64x128]=0x4280-0x6300 [ 1.330528] tegra186-cam-rtcpu b000000.rtcpu: no priority specified, using 99 as default [ 1.331318] tegra-ivc ivc-b000000.rtcpu:mods@32c0: mods: ver=0 grp=1 RX[1x64]=0x6300-0x63c0 TX[1x64]=0x63c0-0x6480 [ 1.331408] tegra-ivc ivc-b000000.rtcpu:ivccontrol@52c0: ivccontrol: ver=0 grp=1 RX[16x320]=0x6480-0x7900 TX[16x320]=0x7900-0x8d80 [ 1.331470] tegra-capture-ivc ivc-b000000.rtcpu:ivccontrol@52c0: no priority specified, using 99 as default [ 1.331517] tegra-ivc ivc-b000000.rtcpu:ivccapture@72c0: ivccapture: ver=0 grp=1 RX[16x64]=0x8d80-0x9200 TX[16x64]=0x9200-0x9680 [ 1.331559] tegra-capture-ivc ivc-b000000.rtcpu:ivccapture@72c0: no priority specified, using 99 as default [ 1.331604] tegra-ivc ivc-b000000.rtcpu:dbg@7c00: dbg: ver=0 grp=1 RX[1x384]=0x9680-0x9880 TX[1x384]=0x9880-0x9a80 [ 1.331709] tegra-ivc ivc-b000000.rtcpu:dbg@7e00: dbg: ver=0 grp=1 RX[1x8192]=0x9a80-0xbb00 TX[1x8192]=0xbb00-0xdb80 [ 1.332015] tegra186-cam-rtcpu b000000.rtcpu: using cam RTCPU IRQ (52) [ 1.332016] tegra186-cam-rtcpu b000000.rtcpu: tegra_camrtc_mon_create is successful [ 1.332486] tegra186-cam-rtcpu b000000.rtcpu: firmware version cpu=sce cmd=5 sha1=c73bbe92930645be44530c166eb578bfbb9499c3 [ 1.334192] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 1.334619] tegra186-aondbg aondbg: aondbg driver probe() OK [ 1.334993] register_ari_mca_banks: Registered MCA ROC:IOB [ 1.335273] register_ari_mca_banks: Registered MCA ROC:CCE [ 1.335958] tegra18-bridge 2390000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.335961] tegra18-bridge 2390000.axi2apb: enabled timeout = 11155000 [ 1.335962] tegra18-bridge 2390000.axi2apb: bridge probed OK [ 1.336012] tegra18-bridge 23a0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.336013] tegra18-bridge 23a0000.axi2apb: enabled timeout = 11155000 [ 1.336015] tegra18-bridge 23a0000.axi2apb: bridge probed OK [ 1.336066] tegra18-bridge 23b0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.336068] tegra18-bridge 23b0000.axi2apb: enabled timeout = 11155000 [ 1.336069] tegra18-bridge 23b0000.axi2apb: bridge probed OK [ 1.336115] tegra18-bridge 23c0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.336117] tegra18-bridge 23c0000.axi2apb: enabled timeout = 11155000 [ 1.336118] tegra18-bridge 23c0000.axi2apb: bridge probed OK [ 1.336165] tegra18-bridge 23d0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.336167] tegra18-bridge 23d0000.axi2apb: enabled timeout = 11155000 [ 1.336168] tegra18-bridge 23d0000.axi2apb: bridge probed OK [ 1.336223] tegra18-bridge 2100000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.336227] tegra18-bridge 2100000.axip2p: enabled timeout = 11155000 [ 1.336229] tegra18-bridge 2100000.axip2p: bridge probed OK [ 1.336274] tegra18-bridge 2110000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.336278] tegra18-bridge 2110000.axip2p: enabled timeout = 11155000 [ 1.336280] tegra18-bridge 2110000.axip2p: bridge probed OK [ 1.336325] tegra18-bridge 2120000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.336329] tegra18-bridge 2120000.axip2p: enabled timeout = 11155000 [ 1.336330] tegra18-bridge 2120000.axip2p: bridge probed OK [ 1.336376] tegra18-bridge 2130000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.336380] tegra18-bridge 2130000.axip2p: enabled timeout = 11155000 [ 1.336382] tegra18-bridge 2130000.axip2p: bridge probed OK [ 1.336426] tegra18-bridge 2140000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.336429] tegra18-bridge 2140000.axip2p: enabled timeout = 11155000 [ 1.336430] tegra18-bridge 2140000.axip2p: bridge probed OK [ 1.336479] tegra18-bridge 2150000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.336483] tegra18-bridge 2150000.axip2p: enabled timeout = 11155000 [ 1.336485] tegra18-bridge 2150000.axip2p: bridge probed OK [ 1.336533] tegra18-bridge 2160000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.336537] tegra18-bridge 2160000.axip2p: enabled timeout = 11155000 [ 1.336538] tegra18-bridge 2160000.axip2p: bridge probed OK [ 1.336583] tegra18-bridge 2170000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.336588] tegra18-bridge 2170000.axip2p: enabled timeout = 11155000 [ 1.336589] tegra18-bridge 2170000.axip2p: bridge probed OK [ 1.336634] tegra18-bridge 2180000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.336639] tegra18-bridge 2180000.axip2p: enabled timeout = 11155000 [ 1.336640] tegra18-bridge 2180000.axip2p: bridge probed OK [ 1.336687] tegra18-bridge 2190000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.336691] tegra18-bridge 2190000.axip2p: enabled timeout = 11155000 [ 1.336692] tegra18-bridge 2190000.axip2p: bridge probed OK [ 1.336752] **** A57 ECC: Enabled [ 1.336753] tegra18_a57_serr_init: on CPU 0 a A57 Core [ 1.336813] tegra18x_actmon d230000.actmon: in actmon_register()... [ 1.337240] tegra18x_actmon d230000.actmon: initialization Completed for the device mc_all [ 1.337696] hw perfevents: enabled with denver15_uncore_pmu PMU driver, 3 counters available [ 1.337826] denver_knobs_init:MTS_VERSION:61650191 [ 1.340378] nvpmodel: initialized successfully [ 1.341231] trusty-virtio trusty:virtio: initializing [ 1.341331] trusty_ipc virtio0: vring0: va(pa) ffffffc1e518c000(0) qsz 32 notifyid 1 [ 1.341337] trusty_ipc virtio0: vring1: va(pa) ffffffc1e518e000(0) qsz 32 notifyid 2 [ 1.341402] trusty-virtio trusty:virtio: initializing done [ 1.341521] trusty_ipc virtio0: is online [ 1.342706] usbcore: registered new interface driver snd-usb-audio [ 1.349489] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit with 64 bit addr [ 1.357543] mmc1: SDHCI controller on 3440000.sdhci [3440000.sdhci] using ADMA 64-bit with 64 bit addr [ 1.359122] input: tegra-hda HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input0 [ 1.359337] input: tegra-hda HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input1 [ 1.360392] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 1.360393] Extcon AUX1(HDMI) disable [ 1.361528] gpio tegra-gpio wake71 for gpio=125(P:5) [ 1.361576] mmc2: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit with 64 bit addr [ 1.383123] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 1.383259] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 1.384723] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 1.390579] tegradc 15210000.nvdisplay: unblank [ 1.391406] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 1.391538] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 1.391857] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 1.393061] Parent Clock set for DC plld2 [ 1.394406] mmc0: mmc_decode_ext_csd: CMDQ supported: depth: 31, cmdq_support: 1 [ 1.397189] tegradc 15210000.nvdisplay: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 1.398654] tegradc 15210000.nvdisplay: hdmi: get YCC quant from EDID. [ 1.408526] mmc0: periodic cache flush enabled [ 1.408532] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 1.408883] mmcblk0: mmc0:0001 032G34 29.1 GiB [ 1.408974] mmcblk0boot0: mmc0:0001 032G34 partition 1 4.00 MiB [ 1.412148] OPE platform probe [ 1.412215] OPE platform probe successful [ 1.413123] mmcblk0boot1: mmc0:0001 032G34 partition 2 4.00 MiB [ 1.413249] mmcblk0rpmb: mmc0:0001 032G34 partition 3 4.00 MiB [ 1.417813] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 [ 1.423817] ata1: SATA link down (SStatus 0 SControl 300) [ 1.425496] usb 1-2: new full-speed USB device number 2 using tegra-xusb [ 1.434297] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 1.434299] Extcon AUX1(HDMI) enable [ 1.447082] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 1.448560] usb 1-2: New USB device found, idVendor=046d, idProduct=c246 [ 1.448563] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.448565] usb 1-2: Product: G300s Optical Gaming Mouse [ 1.448567] usb 1-2: Manufacturer: Logitech [ 1.448776] tegradc 15210000.nvdisplay: sync windows ret = 247 [ 1.450746] input: Logitech G300s Optical Gaming Mouse as /devices/3530000.xhci/usb1/1-2/1-2:1.0/0003:046D:C246.0001/input/input2 [ 1.450944] hid-generic 0003:046D:C246.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech G300s Optical Gaming Mouse] on usb-3530000.xhci-2/input0 [ 1.454429] input: Logitech G300s Optical Gaming Mouse as /devices/3530000.xhci/usb1/1-2/1-2:1.1/0003:046D:C246.0002/input/input3 [ 1.471229] extcon-disp-state external-connection:disp-state: cable 51 state 1 [ 1.471232] Extcon HDMI: HPD enabled [ 1.471246] tegradc 15210000.nvdisplay: hdmi: plugged [ 1.473418] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 1.473508] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 1.473577] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 1.473645] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 1.473713] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 1.473782] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 1.473847] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 1.473915] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 1.473984] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 1.474061] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 1.474127] tegra-asoc: sound: ADMAIF11 <-> ADMAIF11 mapping ok [ 1.474194] tegra-asoc: sound: ADMAIF12 <-> ADMAIF12 mapping ok [ 1.474259] tegra-asoc: sound: ADMAIF13 <-> ADMAIF13 mapping ok [ 1.474323] tegra-asoc: sound: ADMAIF14 <-> ADMAIF14 mapping ok [ 1.474400] tegra-asoc: sound: ADMAIF15 <-> ADMAIF15 mapping ok [ 1.474466] tegra-asoc: sound: ADMAIF16 <-> ADMAIF16 mapping ok [ 1.474532] tegra-asoc: sound: ADMAIF17 <-> ADMAIF17 mapping ok [ 1.474598] tegra-asoc: sound: ADMAIF18 <-> ADMAIF18 mapping ok [ 1.474664] tegra-asoc: sound: ADMAIF19 <-> ADMAIF19 mapping ok [ 1.474738] tegra-asoc: sound: ADMAIF20 <-> ADMAIF20 mapping ok [ 1.496424] u32 classifier [ 1.496426] Actions configured [ 1.496484] Initializing XFRM netlink socket [ 1.497018] NET: Registered protocol family 10 [ 1.497596] NET: Registered protocol family 17 [ 1.497606] NET: Registered protocol family 15 [ 1.497662] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.497700] Bluetooth: RFCOMM socket layer initialized [ 1.497708] Bluetooth: RFCOMM ver 1.11 [ 1.497712] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.497718] Bluetooth: HIDP socket layer initialized [ 1.497732] 9pnet: Installing 9P2000 support [ 1.497763] Key type dns_resolver registered [ 1.498183] Registered cp15_barrier emulation handler [ 1.498197] Registered setend emulation handler [ 1.507547] registered taskstats version 1 [ 1.516150] hid-generic 0003:046D:C246.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech G300s Optical Gaming Mouse] on usb-3530000.xhci-2/input1 [ 1.516406] isp 15600000.isp: initialized [ 1.549181] nvcsi 150c0000.nvcsi: initialized [ 1.552102] tegra-vi4 15700000.vi: using default number of vi channels,15 [ 1.553533] Wake83 for irq=51 [ 1.553611] gpio tegra-gpio-aon wake29 for gpio=56(FF:0) [ 1.553686] gpio tegra-gpio-aon wake67 for gpio=57(FF:1) [ 1.553765] gpio tegra-gpio-aon wake68 for gpio=58(FF:2) [ 1.553900] input: gpio-keys as /devices/gpio-keys/input/input4 [ 1.574591] tegra_rtc c2a0000.rtc: setting system clock to 2000-01-01 03:00:44 UTC (946695644) [ 1.575951] mmcblk mmc0:0001: Card claimed for testing. [ 1.590058] tegra-vi4 15700000.vi: initialized [ 1.600473] tegra-vi4 15700000.vi: subdev 150c0000.nvcsi--1 bound [ 1.605720] bpmp: mounted debugfs mirror [ 1.606906] bwmgr: missing cdev-type property [ 1.611949] ALSA device list: [ 1.611954] #0: tegra-hda at 0x3518000 irq 384 [ 1.611956] #1: tegra-snd-t186ref-mobile-rt565x [ 1.612529] mmc1: Applying tuning correction [ 1.612542] mmc1: Tap value after applying correction 68 [ 1.612549] mmc1: hw tuning done ... [ 1.614760] Freeing unused kernel memory: 8640K [ 1.616481] mmc1: new ultra high speed SDR104 SDIO card at address 0001 [ 1.636283] Root device found: mmcblk0p1 [ 1.637366] Found dev node: /dev/mmcblk0p1 [ 1.657133] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 1.658977] Rootfs mounted over mmcblk0p1 [ 1.684424] Switching from initrd to actual rootfs [ 1.784435] systemd[1]: System time before build time, advancing clock. [ 1.792759] random: crng init done [ 1.810063] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.819050] cgroup: cgroup2: unknown option "nsdelegate" [ 1.834242] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 1.834989] systemd[1]: Detected architecture arm64. [ 1.851582] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 1.855999] systemd[1]: Set hostname to . [ 1.949024] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 1.949032] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 2.066839] systemd[1]: Created slice System Slice. [ 2.067130] systemd[1]: Listening on Journal Socket (/dev/log). [ 2.067233] systemd[1]: Listening on udev Kernel Socket. [ 2.067357] systemd[1]: Listening on udev Control Socket. [ 2.067467] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 2.089534] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 2.136579] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 2.263518] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 2.265489] tegra-pcie 10003000.pcie-controller: link 0 down, ignoring [ 2.342599] systemd-journald[2290]: Received request to flush runtime journal from PID 1 [ 2.671546] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 2.865073] using random self ethernet address [ 2.871673] using random host ethernet address [ 3.081502] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 3.475556] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 3.477520] tegra-pcie 10003000.pcie-controller: link 2 down, ignoring [ 3.483639] Mass Storage Function, version: 2009/09/11 [ 3.483654] LUN: removable file: (no medium) [ 3.494403] using random self ethernet address [ 3.502716] using random host ethernet address [ 3.539985] rndis0: HOST MAC 3a:37:07:ff:99:14 [ 3.540207] rndis0: MAC 3a:37:07:ff:99:15 [ 3.541872] usb0: HOST MAC 3a:37:07:ff:99:16 [ 3.541941] usb0: MAC 3a:37:07:ff:99:17 [ 3.541981] tegra-xudc-new 3550000.xudc: exiting ELPG [ 3.547472] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 3.547520] tegra-xudc-new 3550000.xudc: ep 0 (type: 0, dir: out) enabled [ 3.547580] tegra-xudc-new 3550000.xudc: entering ELPG [ 3.549242] tegra-xudc-new 3550000.xudc: entering ELPG done [ 3.549258] tegra-xudc-new 3550000.xudc: exiting ELPG [ 3.550999] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 3.551015] tegra-xudc-new 3550000.xudc: entering ELPG [ 3.552972] tegra-xudc-new 3550000.xudc: entering ELPG done [ 3.556810] l4tbr0: port 1(rndis0) entered blocking state [ 3.556822] l4tbr0: port 1(rndis0) entered disabled state [ 3.559317] device rndis0 entered promiscuous mode [ 3.567680] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 3.576813] l4tbr0: port 2(usb0) entered blocking state [ 3.576818] l4tbr0: port 2(usb0) entered disabled state [ 3.580702] device usb0 entered promiscuous mode [ 3.590134] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 3.681020] tegra-pcie 10003000.pcie-controller: PCIE: no end points detected [ 3.681296] tegra-pcie 10003000.pcie-controller: PCIE: Disable power rails [ 3.810503] ov5693 2-0036: probing v4l2 sensor. [ 3.829853] ov5693 2-0036: tegracam sensor driver:ov5693_v2.0.6 [ 3.966405] CPU1: shutdown [ 3.969292] psci: CPU1 killed (polled 0 ms) [ 4.040230] CPU2: shutdown [ 4.043251] psci: CPU2 killed (polled 0 ms) [ 4.048007] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4.048193] gpio tegra-gpio-aon wake30 for gpio=60(FF:4) [ 4.059293] bcpu-throttle-alert cooling device registered. [ 4.059539] mcpu-throttle-alert cooling device registered. [ 4.059874] gpu-throttle-alert cooling device registered. [ 4.134335] gpio tegra-gpio wake18 for gpio=101(M:5) [ 4.139891] net eth0: get_configure_l3v4_filter --> [ 4.140421] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4.222909] dhd_module_init in [ 4.223020] found wifi platform device bcmdhd_wlan [ 4.224617] wifi_platform_get_country_code_map: could not get country_code_map [ 4.224622] wifi_plat_dev_drv_probe:platform country code map is not available [ 4.224639] Power-up adapter 'DHD generic adapter' [ 4.224648] wifi_platform_set_power = 1 [ 4.255962] zram: Added device: zram0 [ 4.257959] zram: Added device: zram1 [ 4.264998] zram: Added device: zram2 [ 4.266877] zram: Added device: zram3 [ 4.310270] zram0: detected capacity change from 0 to 1028947968 [ 4.351203] Adding 1004828k swap on /dev/zram0. Priority:5 extents:1 across:1004828k SS [ 4.356035] zram1: detected capacity change from 0 to 1028947968 [ 4.384075] Adding 1004828k swap on /dev/zram1. Priority:5 extents:1 across:1004828k SS [ 4.387578] zram2: detected capacity change from 0 to 1028947968 [ 4.401424] Adding 1004828k swap on /dev/zram2. Priority:5 extents:1 across:1004828k SS [ 4.407478] zram3: detected capacity change from 0 to 1028947968 [ 4.425541] tegra_cec 3960000.tegra_cec: timeout in tegra_cec_native_write_l:172. [ 4.433109] tegra_cec 3960000.tegra_cec: Sent res: -62. [ 4.433319] wifi_platform_bus_enumerate device present 1 [ 4.433510] Adding 1004828k swap on /dev/zram3. Priority:5 extents:1 across:1004828k SS [ 4.442552] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 4.461358] wifi_platform_bus_enumerate device present 0 [ 4.462202] F1 signature read @0x18000000=0x17214354 [ 4.469650] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x1 pkg:0x2 [ 4.472230] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000 [ 4.472307] wifi_platform_get_mac_addr [ 4.497074] ids dhd_log_netlink_init [ 4.497393] wl_create_event_handler(): thread:wl_event_handler:162d started [ 4.497394] wl_event_handler : [ 4.497397] tsk Enter, tsk = 0xffffffc1c6401a90 [ 4.501550] dhd_attach(): thread:dhd_watchdog_thread:162f started [ 4.503550] dhd_attach(): thread:dhd_dpc:1631 started [ 4.503623] dhd_attach(): thread:dhd_rxf:1633 started [ 4.503631] dhd_deferred_work_init: work queue initialized [ 4.504432] Dongle Host Driver, version 1.201.82 (r) Compiled from [ 4.504832] Register interface [wlan0] MAC: 00:04:4b:8c:5e:0b [ 4.504837] dhd_prot_ioctl : bus is down. we have nothing to do [ 4.509626] sdhci-tegra 3440000.sdhci: Tuning done, restoring the best tap value : 68 [ 4.512828] wifi_platform_set_power = 0 [ 4.968590] tegra-vi4 15700000.vi: subdev ov5693 2-0036 bound [ 5.173372] Bridge firewalling registered [ 5.226541] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 5.768358] tegradc 15210000.nvdisplay: unblank [ 5.878191] Netfilter messages via NETLINK v0.30. [ 5.921334] ctnetlink v0.93: registering with nfnetlink. [ 6.286348] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 7.357398] fuse init (API version 7.26) [ 7.535098] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 7.535227] Dongle Host Driver, version 1.201.82 (r) Compiled from [ 7.535237] wl_android_wifi_on in [ 7.535241] wifi_platform_set_power = 1 [ 8.010971] sdhci-tegra 3440000.sdhci: Tuning done, restoring the best tap value : 68 [ 8.013051] F1 signature read @0x18000000=0x17214354 [ 8.030657] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x1 pkg:0x2 [ 8.032556] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000 [ 8.275828] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded. [ 8.320340] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us) [ 8.320593] gpio tegra-gpio-aon wake69 for gpio=59(FF:3) [ 8.320653] gpio tegra-gpio-aon wake69 for gpio=59(FF:3) [ 8.320655] Enabling wake69 [ 8.321383] wifi_platform_get_mac_addr [ 8.323745] Firmware up: op_mode=0x0005, MAC=00:04:4b:8c:5e:0b [ 8.327927] clm path from default:/lib/firmware/brcm/bcmdhd.clm_blob [ 8.327964] Skipping the clm download. len:0 memblk: (null) [ 8.330165] dhd_preinit_ioctls pspretend_threshold for HostAPD failed -23 [ 8.334917] Firmware version = wl0: Jul 21 2020 16:35:45 version 7.35.349.94 (r726700 CY) FWID 01-aa356e32 [ 8.337095] dhd_interworking_enable: failed to set WNM info, ret=-23 [ 8.444216] CFGP2P-ERROR) wl_cfgp2p_add_p2p_disc_if : [ 8.444219] P2P interface registered [ 8.454242] WLC_E_IF: NO_IF set, event Ignored [ 8.469232] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 9.593340] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 9.593350] Bluetooth: BNEP socket layer initialized [ 10.468978] tegradc 15210000.nvdisplay: unblank [ 26.939077] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 31.817930] spmic-ldo0: disabling [ 31.818264] spmic-ldo1: disabling [ 31.818459] en-vdd-sd: disabling [ 31.818465] en-vdd-cam: disabling [ 31.818472] vdd-usb0-5v: disabling [ 31.818476] vdd-usb1-5v: disabling [ 31.818484] en-vdd-disp-3v3: disabling [ 31.818490] en-mdm-pwr-3v7: disabling [ 31.818494] en-vdd-disp-1v8: disabling [ 31.818499] en-vdd-cam-hv-2v8: disabling [ 31.818505] en-vdd-cam-1v2: disabling [ 31.818510] vdd-fan: disabling [ 31.818514] vdd-3v3: disabling [ 31.818521] en-vdd-vcm-2v8: disabling [ 31.818528] vdd-sys-bl: disabling [ 31.818533] en-vdd-sys: disabling [ 47.917567] mmc2: Enabling vmmc regulator [ 48.384158] mmc2: hw tuning done ... [ 48.384191] mmc2: new ultra high speed SDR104 SDHC card at address 0007 [ 48.384536] mmcblk2: mmc2:0007 SD32G 28.9 GiB [ 48.389991] mmcblk2: p1 [ 48.933970] EXT4-fs (mmcblk2p1): mounted filesystem with ordered data mode. Opts: (null) [ 106.776316] usb 1-2: USB disconnect, device number 2 [ 107.009602] usb usb1: usb_suspend_both: status 0 [ 107.009612] tegra-xusb 3530000.xhci: entering ELPG [ 107.012459] tegra-xusb 3530000.xhci: entering ELPG done [ 111.742063] tegra-xusb 3530000.xhci: exiting ELPG [ 111.748983] tegra-xusb 3530000.xhci: Firmware timestamp: 2020-07-06 13:39:28 UTC, Version: 55.18 release [ 111.750250] tegra-xusb 3530000.xhci: exiting ELPG done [ 111.778219] usb usb2: usb_suspend_both: status 0 [ 111.977675] usb 1-2: new low-speed USB device number 3 using tegra-xusb [ 112.005757] usb 1-2: New USB device found, idVendor=046d, idProduct=c31c [ 112.005783] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 112.005801] usb 1-2: Product: USB Keyboard [ 112.005817] usb 1-2: Manufacturer: Logitech [ 112.015322] input: Logitech USB Keyboard as /devices/3530000.xhci/usb1/1-2/1-2:1.0/0003:046D:C31C.0003/input/input5 [ 112.076641] hid-generic 0003:046D:C31C.0003: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-3530000.xhci-2/input0 [ 112.085807] input: Logitech USB Keyboard as /devices/3530000.xhci/usb1/1-2/1-2:1.1/0003:046D:C31C.0004/input/input6 [ 112.146971] hid-generic 0003:046D:C31C.0004: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-3530000.xhci-2/input1