▒▒ [0000.065] I> MB1 (version: 0.11.0.0-t234-54845784-7fb1fa27) [0000.071] I> t234-A01-0-Silicon (0x12347) Prod [0000.075] I> Boot-mode : Coldboot [0000.078] I> Emulation: [0000.081] I> Entry timestamp: 0x00000000 [0000.084] I> last_boot_error: 0x0 [0000.087] I> BR-BCT: preprod_dev_sign: 0 [0000.091] I> rst_source: 0x0, rst_level: 0x0 [0000.095] I> Task: Clocks enable (0x50011b9d) [0000.100] I> Task: Crypto init (0x50018df5) [0000.104] I> Task: Secure debug controls (0x5000c76d) [0000.108] E> Error: ECID of check failed!! [0000.112] E> Error: ECID of check failed!! [0000.116] E> Error: ECID of check failed!! [0000.120] E> Error: ECID of check failed!! [0000.124] I> Task: Program NV master stream id (0x5000c725) [0000.130] I> Task: Verify boot mode (0xd482021) [0000.138] I> Task: Alias fuses (0x5000ecd5) [0000.142] E> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0000.149] I> Task: 0x5000e911 [0000.152] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x00000000 [0000.158] I> FUSE_OPT_GPC_DISABLE = 0x00000000 [0000.162] I> FUSE_OPT_DLA_DISABLE = 0x00000000 [0000.166] I> FUSE_OPT_EMC_DISABLE = 0x00000000 [0000.170] I> FUSE_BOOTROM_PATCH_VERSION = 0x7 [0000.175] I> FUSE_PSCROM_PATCH_VERSION = 0x7 [0000.179] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2 [0000.183] I> FUSE_SKU_INFO_0 = 0xd0 [0000.186] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS [0000.190] I> FUSE_PACKAGE_INFO_0 = 0x2 [0000.194] I> SKU: Perfect F0 [0000.196] I> Task: Voltage monitor (0x50011ba5) [0000.201] I> VMON: Vmon re-calibration and fine tuning done [0000.206] I> Task: Blockdev init (0x500157e1) [0000.210] I> Task: UPHY init (0x5001b42d) [0000.215] E> UPHY: UPHY lane info table is empty in MB1 BCT. [0000.221] I> Task: Boot device init (0x5000d6a9) [0000.225] E> Adding eMMC storage modules [0000.229] I> Boot-device: QSPI (instance: 0) [0000.233] I> qspi flash params source = mb1bct [0000.237] I> Qspi clock source : pllc_out0 [0000.242] I> QSPI-0l initialized successfully [0000.246] I> Task: TSC init (0x5001c7e1) [0000.250] I> Task: Enable WDT 5th expiry (0x5001d27d) [0000.255] I> Task: Disable WDT globally (0x5001d2b9) [0000.259] I> Task: I2C register (0x50000a09) [0000.264] I> Task: Reset FSI (0x50011ba1) [0000.267] I> Task: Pinmux init (0x50010e95) [0000.272] I> Task: Prod config init (0x50011075) [0000.276] I> Task: Pad voltage init (0x50010f85) [0000.281] I> Task: Prod init (0x50011119) [0000.285] I> Task: Thermal check (0x5001121d) [0000.289] I> max_chip_limit = 115 [0000.292] I> min_chip_limit = -30 [0000.305] I> max temp read = 52 [0000.308] I> min temp read = 51 [0000.311] I> Task: Common rail init (0x50011695) [0000.316] W> Thermal config not found in BCT [0000.320] W> Generic i2c config not found in BCT [0000.325] > DEVICE_PROD: module = 13, instance = 4 not found in device prod. [0000.334] W> MEMIO rail config not found in BCT [0000.338] I> Task: Mem clock src (0x5000f6b9) [0000.342] I> Task: BR PMIC seq (0x50011711) [0000.346] I> Task: Misc. board config (0x500116ed) [0000.351] W> Platform config not found in BCT [0000.355] I> Task: Load membct (0x5000f5d5) [0000.359] I> RAM_CODE 0x4000401 [0000.362] I> Loading MEM-BCT to SysRAM [0000.366] I> Scratch RSV109: 0x00000001 active chain: 0 [0000.371] I> Slot: 0 [0000.373] I> Binary[0] block-0 (partition size: 0x40000) [0000.378] I> get_binary_info: Binary name: MEM-BCT-0 [0000.383] I> Size of crypto header is 8192 [0000.387] I> BCH load address is : 0x40050000 [0000.391] I> Size of crypto header is 8192 [0000.396] I> BCH of MEM-BCT-0 read from storage [0000.400] I> BCH address is : 0x40050000 [0000.404] I> MEM-BCT-0 header integrity check is success [0000.409] I> Binary magic in BCH component 0 is MEM0 [0000.414] I> component binary type is 0 [0000.418] I> MEM-BCT-0 binary is read from storage [0000.423] I> MEM-BCT-0 binary integrity check is success [0000.428] I> Binary MEM-BCT-0 loaded successfully at 0x40040000 (0xe580) [0000.439] I> RAM_CODE 0x4000401 [0000.442] I> Task: Save mem-bct info (0x50011d59) [0000.447] I> Task: SDRAM params override (0x50010c79) [0000.452] I> Task: Carveout allocate (0x50011da5) [0000.456] I> RCM blob carveout will not be allocated [0000.461] I> ECC region[0]: Start:0x0, End:0x0 [0000.465] I> ECC region[1]: Start:0x0, End:0x0 [0000.470] I> ECC region[2]: Start:0x0, End:0x0 [0000.474] I> ECC region[3]: Start:0x0, End:0x0 [0000.478] I> ECC region[4]: Start:0x0, End:0x0 [0000.483] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.488] I> Non-ECC region[1]: Start:0x0, End:0x0 [0000.493] I> Non-ECC region[2]: Start:0x0, End:0x0 [0000.498] I> Non-ECC region[3]: Start:0x0, End:0x0 [0000.502] I> Non-ECC region[4]: Start:0x0, End:0x0 [0000.509] I> allocated(CO:51) base:0x80000000 size:0x8000000 align: 0x200000 [0000.516] I> allocated(CO:44) base:0xd6000000 size:0x2a000000 align: 0x100000 [0000.523] I> allocated(CO:31) base:0xce000000 size:0x8000000 align: 0x100000 [0000.530] I> allocated(CO:39) base:0xc8000000 size:0x6000000 align: 0x200000 [0000.537] I> allocated(CO:20) base:0xc6000000 size:0x2000000 align: 0x2000000 [0000.544] I> allocated(CO:24) base:0xc4000000 size:0x2000000 align: 0x2000000 [0000.551] I> allocated(CO:28) base:0xc2000000 size:0x2000000 align: 0x2000000 [0000.558] I> allocated(CO:29) base:0xc0000000 size:0x2000000 align: 0x2000000 [0000.565] I> allocated(CO:41) base:0xbf000000 size:0x1000000 align: 0x100000 [0000.572] I> allocated(CO:43) base:0xbe000000 size:0x1000000 align: 0x200000 [0000.579] I> allocated(CO:02) base:0xbd800000 size:0x800000 align: 0x800000 [0000.586] I> allocated(CO:03) base:0xbd000000 size:0x800000 align: 0x800000 [0000.592] I> allocated(CO:06) base:0xbc800000 size:0x800000 align: 0x800000 [0000.599] I> allocated(CO:10) base:0xbc000000 size:0x800000 align: 0x800000 [0000.606] I> allocated(CO:56) base:0xbb800000 size:0x800000 align: 0x200000 [0000.613] I> allocated(CO:07) base:0xbb400000 size:0x400000 align: 0x400000 [0000.620] I> allocated(CO:22) base:0xbb000000 size:0x400000 align: 0x400000 [0000.627] I> allocated(CO:33) base:0xbac00000 size:0x400000 align: 0x200000 [0000.633] I> allocated(CO:47) base:0xba800000 size:0x400000 align: 0x200000 [0000.640] I> allocated(CO:01) base:0xba700000 size:0x100000 align: 0x100000 [0000.647] I> allocated(CO:04) base:0xba600000 size:0x100000 align: 0x100000 [0000.654] I> allocated(CO:05) base:0xba500000 size:0x100000 align: 0x100000 [0000.661] I> allocated(CO:08) base:0xba400000 size:0x100000 align: 0x100000 [0000.668] I> allocated(CO:09) base:0xba300000 size:0x100000 align: 0x100000 [0000.674] I> allocated(CO:15) base:0xba200000 size:0x100000 align: 0x100000 [0000.681] I> allocated(CO:17) base:0xba100000 size:0x100000 align: 0x100000 [0000.688] I> allocated(CO:23) base:0xba000000 size:0x100000 align: 0x100000 [0000.695] I> allocated(CO:27) base:0xb9f00000 size:0x100000 align: 0x100000 [0000.702] I> allocated(CO:42) base:0xb9e00000 size:0x100000 align: 0x100000 [0000.709] I> allocated(CO:54) base:0xb9d80000 size:0x80000 align: 0x80000 [0000.715] I> allocated(CO:26) base:0xb9d40000 size:0x40000 align: 0x2000 [0000.722] I> allocated(CO:48) base:0xb9d20000 size:0x20000 align: 0x10000 [0000.728] I> allocated(CO:34) base:0xb9d10000 size:0x10000 align: 0x10000 [0000.735] I> allocated(CO:35) base:0xb9d00000 size:0x10000 align: 0x10000 [0000.742] I> allocated(CO:49) base:0xb9cf0000 size:0x10000 align: 0x10000 [0000.748] I> allocated(CO:50) base:0xb9ce0000 size:0x10000 align: 0x10000 [0000.755] I> allocated(CO:52) base:0xb9cd0000 size:0x10000 align: 0x10000 [0000.762] I> Task: SDRAM init (0x5000f6bd) [0000.768] I> SDRAM-params @ 0xd485000 [0000.772] I> MSS code-drop: NvBootSdramInit [0000.776] I> MSS CAR: PLLM/HUB programming for MemoryType: 4 and MemBctRevision: 8 [0000.783] I> MSS CAR: Init PLLM [0000.786] I> MSS CAR: Init PLLHUB [0000.796] I> mb1_sdram_init Done ! [0000.800] I> SDRAM Size in Total 800000000 [0000.804] I> SDRAM test pass [0000.806] I> Task: Dram ecc scrub (0x5000f2c9) [0000.811] I> Task: DRAM alias check (0x50010c71) [0001.027] I> Task: Register checker (0x50010c75) [0001.036] I> Task: Enable clock-mon (0x5001c301) [0001.053] I> FMON: Fmon re-programmed in mb1 [0001.057] I> Task: Mapper init (0x5001a0d5) [0001.062] I> Task: SC7 Context Init (0x5001cacd) [0001.068] I> NV_SC7 Context addr: 0xa0000000 [0001.074] I> Task: CCPLEX IST init (0x5000ce75) [0001.080] I> Task: CPU WP0 (0x5000c2c9) [0001.085] I> Loading MCE [0001.088] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.094] I> Slot: 0 [0001.096] I> Binary[8] block-0 (partition size: 0x80000) [0001.102] I> get_binary_info: Binary name: MCE [0001.107] I> Size of crypto header is 8192 [0001.111] I> BCH load address is : 0x4003e000 [0001.117] I> Size of crypto header is 8192 [0001.122] I> BCH of MCE read from storage [0001.126] I> BCH address is : 0x4003e000 [0001.132] I> MCE header integrity check is success [0001.137] I> Binary magic in BCH component 0 is MTSM [0001.142] I> component binary type is 8 [0001.146] I> Size of crypto header is 8192 [0001.153] I> MCE binary is read from storage [0001.158] I> MCE binary integrity check is success [0001.163] I> Binary MCE loaded successfully at 0x40000000 (0x29e90) [0001.171] I> Size of crypto header is 8192 [0001.182] I> Size of crypto header is 8192 [0001.187] I> Sending WP0 mailbox command to PSC [0001.200] I> Task: MB1 fixed firewalls (0x5001b1bd) [0001.211] I> Task: Load bpmp-fw (0x5001b311) [0001.217] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.223] I> Slot: 0 [0001.225] I> Binary[15] block-0 (partition size: 0x100000) [0001.231] I> get_binary_info: Binary name: BPMP_FW [0001.236] I> Size of crypto header is 8192 [0001.241] I> BCH load address is : 0x807fe000 [0001.246] I> Size of crypto header is 8192 [0001.251] I> BCH of BPMP_FW read from storage [0001.256] I> BCH address is : 0x807fe000 [0001.261] I> BPMP_FW header integrity check is success [0001.267] I> Binary magic in BCH component 0 is BPMF [0001.272] I> component binary type is 15 [0001.276] I> Size of crypto header is 8192 [0001.291] I> BPMP_FW binary is read from storage [0001.299] I> BPMP_FW binary integrity check is success [0001.304] I> Binary BPMP_FW loaded successfully at 0x80000000 (0xf3940) [0001.312] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.318] I> Slot: 0 [0001.321] I> Binary[16] block-0 (partition size: 0x100000) [0001.327] I> get_binary_info: Binary name: BPMP_FW_DTB [0001.332] I> Size of crypto header is 8192 [0001.337] I> BCH load address is : 0x807fc000 [0001.342] I> Size of crypto header is 8192 [0001.347] I> BCH of BPMP_FW_DTB read from storage [0001.352] I> BCH address is : 0x807fc000 [0001.358] I> BPMP_FW_DTB header integrity check is success [0001.364] I> Binary magic in BCH component 0 is BPMD [0001.369] I> component binary type is 16 [0001.373] I> Size of crypto header is 8192 [0001.379] I> BPMP_FW_DTB binary is read from storage [0001.385] I> BPMP_FW_DTB binary integrity check is success [0001.391] I> Binary BPMP_FW_DTB loaded successfully at 0x807dbc00 (0x20380) [0001.400] I> Program IPC carveouts [0001.406] I> Task: Load psc-fw (0x5001b3b9) [0001.411] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.417] I> Slot: 0 [0001.419] I> Binary[17] block-0 (partition size: 0x80000) [0001.425] I> get_binary_info: Binary name: PSC_FW [0001.431] I> Size of crypto header is 8192 [0001.435] I> BCH load address is : 0x803fe000 [0001.441] I> Size of crypto header is 8192 [0001.445] I> BCH of PSC_FW read from storage [0001.450] I> BCH address is : 0x803fe000 [0001.456] I> PSC_FW header integrity check is success [0001.461] I> Binary magic in BCH component 0 is PFWP [0001.466] I> component binary type is 17 [0001.470] I> Size of crypto header is 8192 [0001.479] I> PSC_FW binary is read from storage [0001.485] I> PSC_FW binary integrity check is success [0001.490] I> Binary PSC_FW loaded successfully at 0x80000000 (0x57800) [0001.499] I> Task: Load nvdec-fw (0x5001c05d) [0001.504] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.510] I> Slot: 0 [0001.513] I> Binary[7] block-0 (partition size: 0x100000) [0001.519] I> get_binary_info: Binary name: NVDEC [0001.524] I> Size of crypto header is 8192 [0001.528] I> BCH load address is : 0x800fe000 [0001.534] I> Size of crypto header is 8192 [0001.539] I> BCH of NVDEC read from storage [0001.543] I> BCH address is : 0x800fe000 [0001.549] I> NVDEC header integrity check is success [0001.554] I> Binary magic in BCH component 0 is NDEC [0001.559] I> component binary type is 7 [0001.563] I> Size of crypto header is 8192 [0001.570] I> NVDEC binary is read from storage [0001.576] I> NVDEC binary integrity check is success [0001.581] I> Binary NVDEC loaded successfully at 0x80000000 (0x35000) [0001.593] I> Task: Load tsec-fw (0x5001c249) [0001.599] I> TSEC-FW load support not enabled [0001.603] I> Task: TZDRAM setup (0x50012515) [0001.609] I> Task: SC7 context save (0x5001cbd1) [0001.615] I> NV_SC7 Context addr: 0xa0000000 [0001.621] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.626] I> Slot: 0 [0001.629] I> Binary[13] block-0 (partition size: 0x20000) [0001.635] I> get_binary_info: Binary name: SC7-FW [0001.640] I> Size of crypto header is 8192 [0001.645] I> Size of crypto header is 8192 [0001.649] I> BCH load address is : 0xa0002000 [0001.655] I> Size of crypto header is 8192 [0001.660] I> BCH of SC7-FW read from storage [0001.664] I> BCH address is : 0xa0002000 [0001.670] I> SC7-FW header integrity check is success [0001.675] I> Binary magic in BCH component 0 is WB0B [0001.680] I> component binary type is 13 [0001.685] I> Size of crypto header is 8192 [0001.690] I> SC7-FW binary is read from storage [0001.695] I> SC7-FW binary integrity check is success [0001.701] I> Binary SC7-FW loaded successfully at 0xa0004000 (0xa4e0) [0001.709] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.715] I> Slot: 0 [0001.717] I> Binary[22] block-0 (partition size: 0x30000) [0001.723] I> get_binary_info: Binary name: PSC_RF [0001.728] I> Size of crypto header is 8192 [0001.733] I> Size of crypto header is 8192 [0001.737] I> BCH load address is : 0xa000e4e0 [0001.743] I> Size of crypto header is 8192 [0001.748] I> BCH of PSC_RF read from storage [0001.752] I> BCH address is : 0xa000e4e0 [0001.758] I> PSC_RF header integrity check is success [0001.763] I> Binary magic in BCH component 0 is PSCR [0001.769] I> component binary type is 22 [0001.773] I> Size of crypto header is 8192 [0001.779] I> PSC_RF binary is read from storage [0001.784] I> PSC_RF binary integrity check is success [0001.790] I> Binary PSC_RF loaded successfully at 0xa00104e0 (0x1af70) [0001.809] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.814] I> Slot: 0 [0001.817] I> Binary[14] block-0 (partition size: 0x20000) [0001.823] I> get_binary_info: Binary name: MB2_RF [0001.828] I> Size of crypto header is 8192 [0001.833] I> Size of crypto header is 8192 [0001.837] I> BCH load address is : 0xa008c020 [0001.843] I> Size of crypto header is 8192 [0001.848] I> BCH of MB2_RF read from storage [0001.852] I> BCH address is : 0xa008c020 [0001.858] I> MB2_RF header integrity check is success [0001.863] I> Binary magic in BCH component 0 is MB2R [0001.868] I> component binary type is 14 [0001.873] I> Size of crypto header is 8192 [0001.878] I> MB2_RF binary is read from storage [0001.884] I> MB2_RF binary integrity check is success [0001.889] I> Binary MB2_RF loaded successfully at 0xa008e020 (0xd360) [0001.897] E> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0001.905] I> SC7 context fuse-bypass data is empty [0001.910] I> SC7 context save done [0001.914] I> Task: Load MB2/Applet/FSKP (0x5001c305) [0001.920] I> Loading MB2 [0001.923] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.929] I> Slot: 0 [0001.931] I> Binary[6] block-0 (partition size: 0x70000) [0001.937] I> get_binary_info: Binary name: MB2 [0001.942] I> Size of crypto header is 8192 [0001.947] I> BCH load address is : 0x8007e000 [0001.952] I> Size of crypto header is 8192 [0001.957] I> BCH of MB2 read from storage [0001.961] I> BCH address is : 0x8007e000 [0001.967] I> MB2 header integrity check is success [0001.972] I> Binary magic in BCH component 0 is MB2B [0001.977] I> component binary type is 6 [0001.982] I> Size of crypto header is 8192 [0001.991] I> MB2 binary is read from storage [0001.997] I> MB2 binary integrity check is success [0002.002] I> Binary MB2 loaded successfully at 0x80000000 (0x69940) [0002.010] I> Task: Prepare MB2 params (0x5001c3d5) [0002.017] I> MB2-params @ 0x40060000 [0002.024] I> BR-BCT Boot Chain Fields [0002.028] I> u32_non_gpio_select_boot_chain : 0 [0002.033] I> u32_num_boot_chains : 2 [0002.038] I> bf_bl_gpio_select_boot_chain_1b : 0 [0002.043] I> Task: Dram ecc test (0x5000f379) [0002.049] I> Task: Misc NV security settings (0x5000ca35) [0002.056] I> NVDEC sticky bits programming done [0002.060] I> Task: GPIO interrupt map (0x50011a61) [0002.067] I> Task: Disable/Reload WDT (0x5001d2e9) [0002.073] I> Programmed SLCG global override := 0x0 [0002.078] I> MB1: MSS reconfig completed I> MB2 (version: 0.0.0.0-t234-54845784-e8d12f8b) I> t234-A01-0-Silicon (0x12347) I> Boot-mode : Coldboot I> Emulation: I> Entry timestamp: 0x0020678d I> Regular heap: [base:0x40040000, size:0x10000] I> DMA heap: [base:0xbb800000, size:0x800000] I> Task: Enable hot-plug capability (0x5001aed8) I> Task: Set blob address (0x50001c70) I> Task: PSC mailbox init (0x5000e5e0) I> Task: Crypto init (0x50005abc) I> Task: I2C register (0x50001c5c) I> Task: Boot device init (0x50001d2c) I> Boot_device: QSPI_FLASH instance: 0 I> Qspi clock source : pllc_out0 I> QSPI-0l initialized successfully I> qspi flash-0 params source = MB2 params I> sdmmc-3 params source = MB2 params I> Task: Partition Manager Init (0x50001cf8) I> Found 57 partitions in QSPI_FLASH (instance 0) W> Cannot find any partition table for 00000003 > PARTITION_MANAGER: Failed to publish partition. I> Found 11 partitions in SDMMC_USER (instance 3) I> Task: Load and authenticate registered FWs (0x50012818) I> Task: Load AUXP FWs (0x5001aa7c) I> Successfully register SPE FW load task with MB2 loader I> Skipping SCE FW load I> Successfully register RCE FW load task with MB2 loader I> Successfully register DCE FW load task with MB2 loader I> Unpowergating APE I> Unpowergate done I> Successfully register APE FW load task with MB2 loader I> Skipping FSI FW load I> Successfully register XUSB FW load task with MB2 loader I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_spe-fw I> Size of partition: 589824 I> Binary@ device:3/0 block-56320 (partition size: 0x90000), name: A_spe-fw E> Binary spe is not found in comp table I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_rce-fw I> Size of partition: 1048576 I> Binary@ device:3/0 block-57472 (partition size: 0x100000), name: A_rce-fw E> Binary rce is not found in comp table I> spe: Authentication Finalize Done I> Binary spe loaded successfully at 0xba400000 I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_dce-fw I> Size of partition: 9437184 I> Binary@ device:3/0 block-37888 (partition size: 0x900000), name: A_dce-fw E> Binary dce is not found in comp table I> rce: Authentication Finalize Done I> Binary rce loaded successfully at 0xba100000 I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_adsp-fw I> Size of partition: 2097152 I> Binary@ device:3/0 block-59520 (partition size: 0x200000), name: A_adsp-fw E> Binary ape is not found in comp table I> dce: Authentication Finalize Done I> Binary dce loaded successfully at 0xc6000000 I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_xusb-fw I> Size of partition: 262144 I> Binary@ device:3/0 block-10368 (partition size: 0x40000), name: A_xusb-fw E> Binary xusb is not found in comp table I> ape: Authentication Finalize Done I> Binary ape loaded successfully at 0xbb400000 I> xusb: Authentication Finalize Done I> Binary xusb loaded successfully at 0xba500000 I> Task: Carveout setup (0x50014018) I> Program remaining OEM carveouts I> Task: Restore XUSB sec (0x50001c30) I> Task: OEM firewalls (0x50017ee0) I> MB2-BCT Firewall data is empty I> Task: Unhalt AUXPs (0x5001ace4) I> Unhalting SPE.. I> Enabling combined UART ▒▒▒▒spe: early_init vic initialized tsc initialized aon lic initialized spe: tag is 9f1f07bc2d4b6509c13554672acefaad spe: SafeRTOS v8.4 spe: init scheduler initialized aon hsp initialized tag initialized tcu initialized bpmp ipc initialized spe: late init cpu_nic clock initialized apb clock initialized pm initialized bpmp hsp initialized top1 hsp initialized ccplex ipc initialized spe: start scheduler ▒▒ I> Task: Trigger mailbox for PSC-BL1 exit (0x5000e660) I> Sending opcode 0x4d420802 to psc ▒▒INFO: Entering psc_monitor_init! INFO: GSC22 BOM:0xbb000000 SIZE:0x400000 CLIENT_ACCESS1:00180000 INFO: PSCFW BUILD VERSION: a796142-39d6527-7490c54-dev ▒▒I> Received ACK from psc▒▒INFO: mstatus:0xa00000808 INFO: Supervisor entry_point:c108c00 INFO: pllpsc is already locked. INFO: MONITOR: user task addr:0xbb022000, blob offset:0x00020000 ▒▒ ▒▒ I> Task: Start secure NOR provision (0x50010b3c) I> Task: Load FSI keyblob (0x5000ea28) I> Skipping FSI key blob copy I> Task: Enable FSITHERM (0x5000e5b4) I> Task: Unhalt AUXPs (0x5001acec) I> SCE unhalt skipped I> Unhalting RCE I> RCE unhalt successful I> DCE unhalt successful I> APE unhalt skipped I> FSI unhalt skipped I> Task: Load CPUBL (0x5000f7c4) I> Task: Load TOS (0x5000fe50) I> Task: Load and authenticate registered FWs (0x50012818) I> Scratch RSV109: 0x000000▒▒[ 2.444152] Camera-FW on t234-rce-safe started TCU early console enabled.▒▒INFO: MONITOR: populated user images:16 INFO: mret to Supervisor! INFO: psc supervisor init. INFO: psc_irq_init... INFO: enter idle task. ▒▒01 active chain: 0 I> Partition name: A_cpu-bootloader I> Size of partition: 3670016 I> Binary@ device:3/0 block-17920 (partition size: 0x380000), name: A_cpu-bootloader ▒▒ ▒▒ ▒▒bpmp: init bpmp: base binary md5 is f0425a554b39d571b1bbb5291283d946 bpmp: combined binary md5 is 43f75b5aad2b8e1992e4e049bafc8696 bpmp: firmware tag is 43f75b5aad2b8e1992e4-f0425a554b3 initialized vwdt initialized clk_mach_early initialized mail_early initialized fuse initialized vfrel initialized hwwdt initialized adc fmon_populate_monitors: found 199 monitors initialized fmon initialized mc initialized reset initialized uphy_early initialized emc_early 469 clocks registered initialized clk_mach initialized clk_cal_early initialized clk_mach_early_config initialized io_dpd ▒▒E> Binary cpubl is no▒▒initialized thermal initialized soctherm initialized regime inivrmon_dt_ini▒▒t found in comp table ▒▒t: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors initialized vrmon initialized regulator initialized avfs_clk_platform initialized powergate initialized dvs initialized clk_mach_config initialized pm initialized suspend initialized strap initialized emc initialized emc_mrq WARNING @ [platform/drivers/clk/clk-fwk/clk-cal.c]: aon_apb is not configured by BPMP-FW WARNING @ [platform/drivers/clk/clk-fwk/clk-cal.c]: aon_c▒▒I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_secure-os I> Size of partition: 4194304 I> Binary@ device:3/0 block-25088 (partition ▒▒pu_nic is not configured by BPMP-FW initialized clk_cal initialized uphy_dt initialized uphy_mrq initialized uphy initialized pg_late initialized pg_mrq▒▒size: 0x400000), name: A_secure-os ▒▒_init swdtimer_init: 0 reg polling star▒▒E> Binary tos is not found in comp table ▒▒t w period 47 ms initialized swdtimer initialized hwwdt_late initialized bwmgr initialized thermal_host_trip initialized thermal_mrq initialized reset_mrq initialized mail_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized i2c_mrq initialized tag_mrq initialized bwmgr_mrq initialized console_mrq initialized mrq▒▒I> MB2-params @ 0x40060000 I> CPUBL-params @ 0xc2000000 ▒▒ missing prod DT calibration data for 199 fmons initialized clk_sync_fmon_post initialized clk_cal_late initialized noc_late initialized dbells initialized dmce initialized cvc initialized avfs_clk_mach_post initialized pm_post initialized avfs_clk_platform_post initialized cvc_late initialized rm initialized console_late ▒▒[ 2.676460] Camera-FW on t234-rce-safe ready SHA1=ab261c6c (crt 16.825 ms,▒▒initialized clk_mach_post initialized pg_post initialized regulator_post initialized profile initialized fuse_late initialized extras_post bpmp: init complete ▒▒ total boot 250.188 ms) ▒▒I> cpubl: Authentication Finalize Done I> Binary cpubl loaded successfully at 0xba800000 I> tos: Authentication Finalize Done I> Binary tos loaded successfully at 0xbeee7000 I> Task: Prepare TOS params (0x5000fdcc) I> Task: OEM SC7 context save (0x50010878) I> oem sc7 context saved I> Task: Disable MSS perf stats (0x5001ad78) I> Task: Program display st▒▒DCE: FW Boot Done ▒▒icky bits (0x5001acf4) I> Task: Storage device deinit (0x50001ca4) I> Task: SMMU init (0x5001a738) I> Task: Program CBB PCIE AMAP regions (0x500031dc) I> Task: Program GICv3 registers (0x5001ae18) I> Task: Audit firewall settings (0x5001816c) I> MB2 finished ▒▒NOTICE: BL31: v2.5(release):ef8af0b99 NOTICE: BL31: Built : 20:58:00, May 16 2022 ERROR: Error initializing runtime service trusty_fast ▒▒ Jetson UEFI firmware (version r34.1-975eef6 built on 2022-05-16T20:58:45-07:00) ** WARNING: Test Key is used. ** EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd421] [ 0.000000] Linux version 5.10.65-tegra (root@mogo) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #37 SMP PREEMPT Wed May 25 18:10:04 CST 2022 [ 0.000000] OF: fdt: memory scan node memory@80000000, reg size 16, [ 0.000000] OF: fdt: - 80000000 , c0000000 [ 0.000000] Machine model: NVIDIA Orin Jetson-Small Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x8546a7898 SMBIOS=0xbabc0000 SMBIOS 3.0=0x853230000 MEMATTR=0x852f46018 ESRT=0x8531c4518 RNG=0x85435ff18 MEMRESERVE=0x852f47f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000008531c4518 to 0x00000008531c4550. [ 0.000000] Reserved memory: created CMA memory pool at 0x000000086b800000, size 256 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] OF: reserved mem: initialized node fsi-carveout, compatible id nvidia,fsi-carveout [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000087fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x0000000087ffffff] [ 0.000000] node 0: [mem 0x0000000088000000-0x00000000b9ccffff] [ 0.000000] node 0: [mem 0x00000000ba800000-0x00000000ba9affff] [ 0.000000] node 0: [mem 0x00000000babb0000-0x00000000babcffff] [ 0.000000] node 0: [mem 0x00000000babd0000-0x00000000babfffff] [ 0.000000] node 0: [mem 0x00000000c2000000-0x00000000c3ffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000084fffffff] [ 0.000000] node 0: [mem 0x0000000850000000-0x0000000851faffff] [ 0.000000] node 0: [mem 0x0000000851fb0000-0x0000000852cf0fff] [ 0.000000] node 0: [mem 0x0000000852cf1000-0x0000000852e52fff] [ 0.000000] node 0: [mem 0x0000000852e53000-0x0000000852edffff] [ 0.000000] node 0: [mem 0x0000000852ee0000-0x0000000852efffff] [ 0.000000] node 0: [mem 0x0000000852f00000-0x000000085317ffff] [ 0.000000] node 0: [mem 0x0000000853180000-0x000000085319ffff] [ 0.000000] node 0: [mem 0x00000008531a0000-0x000000085321ffff] [ 0.000000] node 0: [mem 0x0000000853220000-0x000000085323ffff] [ 0.000000] node 0: [mem 0x0000000853240000-0x0000000853ceffff] [ 0.000000] node 0: [mem 0x0000000853cf0000-0x0000000853f1ffff] [ 0.000000] node 0: [mem 0x0000000853f20000-0x0000000853fdffff] [ 0.000000] node 0: [mem 0x0000000853fe0000-0x000000085411ffff] [ 0.000000] node 0: [mem 0x0000000854120000-0x000000085418ffff] [ 0.000000] node 0: [mem 0x0000000854190000-0x000000085424ffff] [ 0.000000] node 0: [mem 0x0000000854250000-0x000000085425ffff] [ 0.000000] node 0: [mem 0x0000000854260000-0x00000008542fffff] [ 0.000000] node 0: [mem 0x0000000854300000-0x000000085434ffff] [ 0.000000] node 0: [mem 0x0000000854350000-0x000000085435ffff] [ 0.000000] node 0: [mem 0x0000000854360000-0x00000008543affff] [ 0.000000] node 0: [mem 0x00000008543b0000-0x000000085456ffff] [ 0.000000] node 0: [mem 0x0000000854570000-0x000000085457ffff] [ 0.000000] node 0: [mem 0x0000000854580000-0x000000085465ffff] [ 0.000000] node 0: [mem 0x0000000854660000-0x00000008546dffff] [ 0.000000] node 0: [mem 0x00000008546e0000-0x000000085477ffff] [ 0.000000] node 0: [mem 0x0000000854780000-0x000000085485ffff] [ 0.000000] node 0: [mem 0x0000000854860000-0x00000008548affff] [ 0.000000] node 0: [mem 0x00000008548b0000-0x000000085493ffff] [ 0.000000] node 0: [mem 0x0000000854940000-0x000000085498ffff] [ 0.000000] node 0: [mem 0x0000000854990000-0x00000008549affff] [ 0.000000] node 0: [mem 0x00000008549b0000-0x0000000854a4ffff] [ 0.000000] node 0: [mem 0x0000000854a50000-0x0000000854aaffff] [ 0.000000] node 0: [mem 0x0000000854ab0000-0x0000000854b9ffff] [ 0.000000] node 0: [mem 0x0000000854ba0000-0x000000085537ffff] [ 0.000000] node 0: [mem 0x0000000855380000-0x000000085555ffff] [ 0.000000] node 0: [mem 0x0000000855560000-0x000000087b8bffff] [ 0.000000] node 0: [mem 0x000000087b8c0000-0x000000087b90ffff] [ 0.000000] node 0: [mem 0x000000087b910000-0x000000087fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000087fffffff] [ 0.000000] On node 0, zone DMA: 304 pages in unavailable ranges [ 0.000000] On node 0, zone DMA: 80 pages in unavailable ranges [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 31 pages/cpu s90008 r8192 d28776 u126976 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 7983060 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 mminit_loglevel=4 console=ttyTCU0,115200 console=tty0 firmware_class.path=/etc/firmware fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) [ 0.000000] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000a9cd0000-0x00000000b9cd0000] (256MB) [ 0.000000] Memory: 31083428K/32439104K available (18432K kernel code, 3212K rwdata, 7060K rodata, 3968K init, 1072K bss, 1093532K reserved, 262144K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=12. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 960 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] GICv3: 16 PPIs implemented [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000000f440000 [ 0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:608, num:70) [ 0.000000] GICv2m: range[mem 0x0f410000-0x0f41ffff], SPI[608:677] [ 0.000000] random: get_random_bytes called from start_kernel+0x378/0x4f4 with crng_init=0 [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000002] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000646] Console: colour dummy device 80x25 [ 0.000847] printk: console [tty0] enabled [ 0.000884] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.000894] pid_max: default: 32768 minimum: 301 [ 0.000944] LSM: Security Framework initializing [ 0.001011] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.001058] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.002786] rcu: Hierarchical SRCU implementation. [ 0.002874] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.003253] DTS File Name: arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t23x/concord/kernel-dts/tegra234-p3701-0000-p3737-0000.dts [ 0.003260] DTB Build time: May 25 2022 18:28:04 [ 0.004386] Tegra Revision: A01 SKU: 0xd0 CPU Process: 0 SoC Process: 0 [ 0.004508] Remapping and enabling EFI services. [ 0.005676] smp: Bringing up secondary CPUs ... [ 0.006073] Detected PIPT I-cache on CPU1 [ 0.006106] GICv3: CPU1: found redistributor 100 region 0:0x000000000f460000 [ 0.006135] CPU1: Booted secondary processor 0x0000000100 [0x410fd421] [ 0.006484] Detected PIPT I-cache on CPU2 [ 0.006495] GICv3: CPU2: found redistributor 200 region 0:0x000000000f480000 [ 0.006509] CPU2: Booted secondary processor 0x0000000200 [0x410fd421] [ 0.006825] Detected PIPT I-cache on CPU3 [ 0.006833] GICv3: CPU3: found redistributor 300 region 0:0x000000000f4a0000 [ 0.006847] CPU3: Booted secondary processor 0x0000000300 [0x410fd421] [ 0.009169] Detected PIPT I-cache on CPU4 [ 0.009190] GICv3: CPU4: found redistributor 10000 region 0:0x000000000f4c0000 [ 0.009215] CPU4: Booted secondary processor 0x0000010000 [0x410fd421] [ 0.009583] Detected PIPT I-cache on CPU5 [ 0.009592] GICv3: CPU5: found redistributor 10100 region 0:0x000000000f4e0000 [ 0.009606] CPU5: Booted secondary processor 0x0000010100 [0x410fd421] [ 0.009942] Detected PIPT I-cache on CPU6 [ 0.009952] GICv3: CPU6: found redistributor 10200 region 0:0x000000000f500000 [ 0.009966] CPU6: Booted secondary processor 0x0000010200 [0x410fd421] [ 0.010311] Detected PIPT I-cache on CPU7 [ 0.010320] GICv3: CPU7: found redistributor 10300 region 0:0x000000000f520000 [ 0.010334] CPU7: Booted secondary processor 0x0000010300 [0x410fd421] [ 0.012664] Detected PIPT I-cache on CPU8 [ 0.012686] GICv3: CPU8: found redistributor 20000 region 0:0x000000000f540000 [ 0.012713] CPU8: Booted secondary processor 0x0000020000 [0x410fd421] [ 0.013079] Detected PIPT I-cache on CPU9 [ 0.013089] GICv3: CPU9: found redistributor 20100 region 0:0x000000000f560000 [ 0.013102] CPU9: Booted secondary processor 0x0000020100 [0x410fd421] [ 0.013443] Detected PIPT I-cache on CPU10 [ 0.013452] GICv3: CPU10: found redistributor 20200 region 0:0x000000000f580000 [ 0.013466] CPU10: Booted secondary processor 0x0000020200 [0x410fd421] [ 0.013804] Detected PIPT I-cache on CPU11 [ 0.013814] GICv3: CPU11: found redistributor 20300 region 0:0x000000000f5a0000 [ 0.013828] CPU11: Booted secondary processor 0x0000020300 [0x410fd421] [ 0.013881] smp: Brought up 1 node, 12 CPUs [ 0.013945] SMP: Total of 12 processors activated. [ 0.013951] CPU features: detected: Privileged Access Never [ 0.013954] CPU features: detected: LSE atomic instructions [ 0.013956] CPU features: detected: User Access Override [ 0.013959] CPU features: detected: 32-bit EL0 Support [ 0.013962] CPU features: detected: Common not Private translations [ 0.013964] CPU features: detected: RAS Extension Support [ 0.013967] CPU features: detected: Data cache clean to the PoU not required for I/D coherence [ 0.013970] CPU features: detected: CRC32 instructions [ 0.013972] CPU features: detected: Speculative Store Bypassing Safe (SSBS) [ 0.047507] CPU: All CPU(s) started at EL2 [ 0.049834] devtmpfs: initialized [ 0.059054] Registered cp15_barrier emulation handler [ 0.059071] Registered setend emulation handler [ 0.059076] KASLR enabled [ 0.059153] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.059165] futex hash table entries: 4096 (order: 6, 262144 bytes, linear) [ 0.060699] pinctrl core: initialized pinctrl subsystem [ 0.061154] SMBIOS 3.0.0 present. [ 0.061163] DMI: /, BIOS r34.1-975eef6 05/16/2022 [ 0.061411] NET: Registered protocol family 16 [ 0.062262] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations [ 0.062470] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.062671] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.062731] audit: initializing netlink subsys (disabled) [ 0.062837] audit: type=2000 audit(0.060:1): state=initialized audit_enabled=0 res=1 [ 0.063461] printk: console [ramoops-1] enabled [ 0.063468] pstore: Registered ramoops as persistent store backend [ 0.063473] ramoops: using 0x200000@0xba9b0000, ecc: 0 [ 0.063626] thermal_sys: Registered thermal governor 'step_wise' [ 0.063627] thermal_sys: Registered thermal governor 'power_allocator' [ 0.063633] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.065003] cpuidle: using governor menu [ 0.065139] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.065247] ASID allocator initialised with 65536 entries [ 0.065390] Serial: AMBA PL011 UART driver [ 0.066775] tegra234_mc_sid_probe(): tegra234 mc-sid probe successful [ 0.066799] Tegra reboot handler registered. [ 0.066874] DTS File Name: arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t23x/concord/kernel-dts/tegra234-p3701-0000-p3737-0000.dts [ 0.066882] DTB Build time: May 25 2022 18:28:04 [ 0.080830] mc: mapped MMIO address: 0x(____ptrval____) -> 0x2c10000 [ 0.080851] mc: mapped MMIO address: 0x(____ptrval____) -> 0x2c20000 [ 0.080860] mc: mapped MMIO address: 0x(____ptrval____) -> 0x2c30000 [ 0.080871] mc: mapped MMIO address: 0x(____ptrval____) -> 0x2c40000 [ 0.080879] mc: mapped MMIO address: 0x(____ptrval____) -> 0x2c50000 [ 0.080888] mc: mapped MMIO address: 0x(____ptrval____) -> 0x2b80000 [ 0.080896] mc: mapped MMIO address: 0x(____ptrval____) -> 0x2b90000 [ 0.080903] mc: mapped MMIO address: 0x(____ptrval____) -> 0x2ba0000 [ 0.080911] mc: mapped MMIO address: 0x(____ptrval____) -> 0x2bb0000 [ 0.080919] mc: mapped MMIO address: 0x(____ptrval____) -> 0x1700000 [ 0.080927] mc: mapped MMIO address: 0x(____ptrval____) -> 0x1710000 [ 0.080935] mc: mapped MMIO address: 0x(____ptrval____) -> 0x1720000 [ 0.080942] mc: mapped MMIO address: 0x(____ptrval____) -> 0x1730000 [ 0.080950] mc: mapped MMIO address: 0x(____ptrval____) -> 0x1740000 [ 0.080958] mc: mapped MMIO address: 0x(____ptrval____) -> 0x1750000 [ 0.080966] mc: mapped MMIO address: 0x(____ptrval____) -> 0x1760000 [ 0.080974] mc: mapped MMIO address: 0x(____ptrval____) -> 0x1770000 [ 0.080985] nv-tegra-mc 2c10000.mc: No mssnvlink node [ 0.081003] mc-err: mcerr ops are set to t23x [ 0.081324] tegra23x-cbb 13a00000.cbb-en: secure_irq = 21 [ 0.081386] tegra23x-cbb c600000.aon-en: secure_irq = 22 [ 0.081429] tegra23x-cbb de00000.dce-en: secure_irq = 23 [ 0.081464] tegra23x-cbb be00000.rce-en: secure_irq = 24 [ 0.081498] tegra23x-cbb b600000.sce-en: secure_irq = 25 [ 0.085241] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.085252] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.085257] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.085262] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.086625] ACPI: Interpreter disabled. [ 0.087733] vdd-av1v1-hub: supplied by vdd-5v-sys [ 0.087847] vbusA-cvb: supplied by vdd-5v-sys [ 0.087927] vbusB-cvb: supplied by vdd-5v-sys [ 0.088045] vdd-usbc1-vbus: supplied by vdd-5v-sys [ 0.088125] vdd-usbc2-vbus: supplied by vdd-5v-sys [ 0.088426] iommu: Default domain type: Translated [ 0.088466] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.088619] SCSI subsystem initialized [ 0.088689] usbcore: registered new interface driver usbfs [ 0.088703] usbcore: registered new interface driver hub [ 0.088708] mogo usb hub init [ 0.088724] usbcore: registered new device driver usb [ 0.088894] mc: Linux media interface: v0.10 [ 0.088905] videodev: Linux video capture interface: v2.00 [ 0.089047] pps_core: LinuxPPS API ver. 1 registered [ 0.089052] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.089060] PTP clock support registered [ 0.089255] tegra_wdt_t18x 2190000.watchdog: Tegra WDT init timeout = 120 sec [ 0.089296] tegra_wdt_t18x 2190000.watchdog: Registered successfully [ 0.090588] Registered efivars operations [ 0.091000] FPGA manager framework [ 0.091165] Advanced Linux Sound Architecture Driver Initialized. [ 0.091422] Bluetooth: Core ver 2.22 [ 0.091437] NET: Registered protocol family 31 [ 0.091442] Bluetooth: HCI device and connection manager initialized [ 0.091453] Bluetooth: HCI socket layer initialized [ 0.091459] Bluetooth: L2CAP socket layer initialized [ 0.091468] Bluetooth: SCO socket layer initialized [ 0.091991] camchar: rtcpu character device driver loaded [ 0.092209] clocksource: Switched to clocksource arch_sys_counter [ 0.243314] VFS: Disk quotas dquot_6.6.0 [ 0.243355] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.243459] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.243668] tegra-carveouts tegra-carveouts: fsi :dma coherent mem declare 0x00000000bf000000,16777216 [ 0.243681] tegra-carveouts tegra-carveouts: assigned reserved memory node fsi-carveout [ 0.243692] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000d6000000,704643072 [ 0.243700] nvmap_page_pool_init: Total RAM pages: 7836393 [ 0.243705] nvmap_page_pool_init: nvmap page pool size: 979549 pages (3826 MB) [ 0.243708] pnp: PnP ACPI: disabled [ 0.243783] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.243853] misc nvmap: created heap vpr base 0x00000000d6000000 size (688128KiB) [ 0.245371] la/ptsa driver initialized. [ 0.245420] NET: Registered protocol family 2 [ 0.245611] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.247410] misc nvmap: created heap fsi base 0x00000000bf000000 size (16384KiB) [ 0.247718] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 0.247762] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.247971] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.248443] TCP: Hash tables configured (established 262144 bind 65536) [ 0.248519] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.248576] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.248703] NET: Registered protocol family 1 [ 0.248932] RPC: Registered named UNIX socket transport module. [ 0.248942] RPC: Registered udp transport module. [ 0.248946] RPC: Registered tcp transport module. [ 0.248951] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.248963] PCI: CLS 0 bytes, default 64 [ 0.249047] Trying to unpack rootfs image as initramfs... [ 0.357830] Freeing initrd memory: 8196K [ 0.359643] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.359807] kvm [1]: IPA Size Limit: 48 bits [ 0.359970] kvm [1]: VHE mode initialized successfully [ 0.360600] workingset: timestamp_bits=46 max_order=23 bucket_order=0 [ 0.361993] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.362194] NFS: Registering the id_resolver key type [ 0.362216] Key type id_resolver registered [ 0.362221] Key type id_legacy registered [ 0.362248] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.362258] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.362272] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.373742] NET: Registered protocol family 38 [ 0.373766] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 239) [ 0.373822] io scheduler mq-deadline registered [ 0.373828] io scheduler kyber registered [ 0.377240] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.377269] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 0.377287] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.377303] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.379458] tegra_dc_assign_hw_data: no matching compatible node [ 0.379466] tegradccommon module_init failed [ 0.379472] tegradc module_init failed [ 0.379678] EINJ: ACPI disabled. [ 0.380871] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.380882] tegra-pmc: ### PMC reset source: SYS_RESET_N [ 0.380888] tegra-pmc: ### PMC reset level: L0 [ 0.380893] tegra-pmc: ### PMC reset status reg: 0x0 [ 0.381913] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.385677] random: fast init done [ 0.386758] printk: console [ttyTCU0] enabled [ 2.192888] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.198802] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.203354] arm-smmu 12000000.iommu: stage 1 translation [ 2.208703] arm-smmu 12000000.iommu: stage 2 translation [ 2.214201] arm-smmu 12000000.iommu: nested translation [ 2.219365] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.226537] arm-smmu 12000000.iommu: 128 context banks (0 stage-2 only) [ 2.234839] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.239570] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.246132] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.253259] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.259172] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.263894] arm-smmu 10000000.iommu: stage 1 translation [ 2.269409] arm-smmu 10000000.iommu: stage 2 translation [ 2.274831] arm-smmu 10000000.iommu: nested translation [ 2.280258] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.287434] arm-smmu 10000000.iommu: 128 context banks (0 stage-2 only) [ 2.295695] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.300646] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.307209] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.314128] arm-smmu 8000000.iommu: probing hardware configuration... [ 2.320335] arm-smmu 8000000.iommu: SMMUv2 with: [ 2.325060] arm-smmu 8000000.iommu: stage 1 translation [ 2.330571] arm-smmu 8000000.iommu: stage 2 translation [ 2.335996] arm-smmu 8000000.iommu: nested translation [ 2.341157] arm-smmu 8000000.iommu: stream matching with 128 register groups [ 2.348334] arm-smmu 8000000.iommu: 128 context banks (0 stage-2 only) [ 2.356656] arm-smmu 8000000.iommu: Supported page sizes: 0x00001000 [ 2.361545] arm-smmu 8000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.368106] arm-smmu 8000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.375206] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.384035] tegra_profiler: version: 1.146, samples/io: 49/28 [ 2.388304] tegra_profiler: auth: init [ 2.393068] tegra23x-qspi 3270000.spi: Adding to iommu group 0 [ 2.398658] libphy: Fixed MDIO Bus: probed [ 2.402063] tun: Universal TUN/TAP device driver, 1.6 [ 2.407634] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.414401] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.419925] e1000e: Intel(R) PRO/1000 Network Driver [ 2.424721] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.430681] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.436095] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.441935] PPP generic driver version 2.4.2 [ 2.446296] PPP BSD Compression module registered [ 2.450974] PPP Deflate Compression module registered [ 2.456236] PPP MPPE Compression module registered [ 2.461051] usbcore: registered new interface driver r8152 [ 2.466379] usbcore: registered new interface driver asix [ 2.471804] usbcore: registered new interface driver ax88179_178a [ 2.477928] usbcore: registered new interface driver cdc_ether [ 2.483877] usbcore: registered new interface driver net1080 [ 2.489488] usbcore: registered new interface driver cdc_subset [ 2.495513] usbcore: registered new interface driver zaurus [ 2.501205] usbcore: registered new interface driver cdc_ncm [ 2.506889] usbcore: registered new interface driver aqc111 [ 2.512404] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.518617] ohci-pci: OHCI PCI platform driver [ 2.522909] ohci-platform: OHCI generic platform driver [ 2.528235] tegra-xusb 3610000.xhci: Adding to iommu group 1 [ 2.534053] usbcore: registered new interface driver uas [ 2.539185] usbcore: registered new interface driver usb-storage [ 2.545150] tegra-xudc 3550000.xudc: Adding to iommu group 2 [ 2.551006] mousedev: PS/2 mouse device common for all mice [ 2.556336] usbcore: registered new interface driver xpad [ 2.563581] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.567101] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:19 UTC (19) [ 2.574883] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.581106] i2c /dev entries driver [ 2.584677] tegra-i2c 3160000.i2c: Adding to iommu group 3 [ 2.590254] tegra-i2c c240000.i2c: Adding to iommu group 3 [ 2.595693] tegra-i2c 3180000.i2c: Adding to iommu group 3 [ 2.601082] tegra-i2c 3190000.i2c: Adding to iommu group 3 [ 2.606414] tegra-i2c 31b0000.i2c: Adding to iommu group 3 [ 2.611920] tegra-i2c 31c0000.i2c: Adding to iommu group 3 [ 2.617347] tegra-i2c c250000.i2c: Adding to iommu group 3 [ 2.622682] tegra-i2c 31e0000.i2c: Adding to iommu group 3 [ 2.629779] tegra-camrtc-capture-vi tegra-capture-vi: ep of_device is not enabled endpoint. [ 2.636300] tegra-camrtc-capture-vi tegra-capture-vi: ep of_device is not enabled endpoint. [ 2.645351] device-mapper: uevent: version 1.0.3 [ 2.649233] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.658470] sdhci: Secure Digital Host Controller Interface driver [ 2.663947] sdhci: Copyright(c) Pierre Ossman [ 2.668409] Synopsys Designware Multimedia Card Interface Driver [ 2.674518] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.680399] sdhci-tegra 3460000.sdhci: Adding to iommu group 4 [ 2.680544] sdhci-tegra 3400000.sdhci: Adding to iommu group 5 [ 2.681473] pstore: ignoring unexpected backend 'efi' [ 2.681531] SMCCC: SOC_ID: ID = jep106:036b:0023 Revision = 0x00000401 [ 2.682530] tegra-bpmp bpmp: firmware: 43f75b5aad2b8e1992e4-f0425a554b3 ▒▒debugfs initialized ▒▒[ 3.764942] hid: raw HID events driver (C) Jiri Kosina [ 3.765518] usbcore: registered new interface driver usbhid [ 3.765677] usbhid: USB HID core driver [ 3.765974] tegra-dce d800000.dce: Adding to iommu group 6 [ 3.767339] dce: dce_ipc_channel_init:314 Invalid Channel State [0x0] for ch_type [2] [ 3.768497] dce: dce_wait_boot_complete:100 dce is ready to receive bootstrap commands [ 3.768624] tegra234-aon c000000.aon: Adding to iommu group 7 [ 3.769873] c000000.aon:hsp: probed [ 3.770135] tegra234-aon c000000.aon: init done [ 3.770491] tegra23x-psc e860000.psc: Adding to iommu group 8 [ 3.770910] tegra23x-psc e860000.psc: ext_cfg base:(____ptrval____) [ 3.771084] tegra23x-psc e860000.psc: init done [ 3.771338] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 9 [ 3.772061] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 3.772950] dce: dce_mailbox_set_full_interrupt:165 Intr bit set multiple times for MB : [0x5] [ 3.773255] dce: dce_admin_ipc_handle_signal:119 Spurious signal on channel: [0]. Ignored... [ 3.773496] dce: dce_admin_send_cmd_ver:424 version : [0x2] err : [0x0] [ 3.776815] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 3.787921] dce: dce_mailbox_set_full_interrupt:165 Intr bit set multiple times for MB : [0x1] [ 3.796599] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 3.796650] dce: dce_admin_setup_clients_ipc:480 Channel Reset Complete for Type [1] ... [ 3.796655] dce: dce_admin_ipc_handle_signal:119 Spurious signal on channel: [1]. Ignored... [ 3.796663] dce: dce_admin_ipc_handle_signal:119 Spurious signal on channel: [1]. Ignored... [ 3.799280] random: crng init done [ 3.808243] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 3.815801] dce: dce_admin_setup_clients_ipc:456 Get queue info failed for [2] [ 3.824745] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 3.833046] dce: dce_mailbox_set_full_interrupt:165 Intr bit set multiple times for MB : [0x2] [ 3.836674] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 3.847218] dce: dce_admin_setup_clients_ipc:480 Channel Reset Complete for Type [3] ... [ 3.847221] dce: dce_admin_ipc_handle_signal:119 Spurious signal on channel: [3]. Ignored... [ 3.847233] dce: dce_admin_ipc_handle_signal:119 Spurious signal on channel: [3]. Ignored... [ 3.854606] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 3.865602] dce: dce_worker:209 DCE_BOOT_DONE [ 3.874359] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 3.941230] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (115) [ 3.947404] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 3.956959] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=ab261c6cb44ef92b00c3f83a96d5951f9ccd0c06 [ 3.968184] t19x_cache tegra-cache: probed [ 3.970602] scf-pmu-drv scf-pmu: Registered T23x SCF Uncore PMU [ 3.989260] nvpmodel: initialized successfully [ 3.989652] tegra_hv: get_hvd: not initialized yet [ 3.989796] user_ivc_mempool: hypervisor not present [ 3.991073] usbcore: registered new interface driver snd-usb-audio [ 3.997527] u32 classifier [ 3.999810] input device check on [ 4.003488] Actions configured [ 4.006935] Initializing XFRM netlink socket [ 4.011512] NET: Registered protocol family 10 [ 4.017087] Segment Routing with IPv6 [ 4.019265] NET: Registered protocol family 17 [ 4.023543] NET: Registered protocol family 15 [ 4.028027] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.041415] Bluetooth: RFCOMM socket layer initialized [ 4.046030] Bluetooth: RFCOMM ver 1.11 [ 4.049957] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.055815] Bluetooth: HIDP socket layer initialized [ 4.061475] 9pnet: Installing 9P2000 support [ 4.065235] Key type dns_resolver registered [ 4.070386] registered taskstats version 1 [ 4.073994] pstore: Using crash dump compression: deflate [ 4.079233] tegra194-pcie 14100000.pcie: Adding to iommu group 10 [ 4.090444] tegra194-pcie 14100000.pcie: Using GICv2m MSI allocator [ 4.092144] tegra194-pcie 14160000.pcie: Adding to iommu group 11 [ 4.102799] tegra194-pcie 14160000.pcie: Using GICv2m MSI allocator [ 4.104461] tegra194-pcie 141a0000.pcie: Adding to iommu group 12 [ 4.114953] tegra194-pcie 141a0000.pcie: Using GICv2m MSI allocator [ 4.136746] tegra-gpcdma 2600000.gpcdma: Adding to iommu group 3 [ 4.138106] tegra-gpcdma 2600000.gpcdma: GPC DMA driver register 31 channels [ 4.138518] host1x 13e40000.host1x: Adding to iommu group 13 [ 5.146576] t23x_init_gating_regs: Timed out waiting for syncpt ram init! [ 5.157708] host1x 13e40000.host1x: initialized [ 5.158143] iommu_context_dev 13e40000.host1x:niso0_ctx0: Adding to iommu group 14 [ 5.158695] iommu_context_dev 13e40000.host1x:niso0_ctx0: initialized (streamid=53, iommu=smmu.0x0000000012000000) [ 5.160334] iommu_context_dev 13e40000.host1x:niso0_ctx1: Adding to iommu group 15 [ 5.160796] iommu_context_dev 13e40000.host1x:niso0_ctx1: initialized (streamid=54, iommu=smmu.0x0000000012000000) [ 5.162375] iommu_context_dev 13e40000.host1x:niso0_ctx2: Adding to iommu group 16 [ 5.162822] iommu_context_dev 13e40000.host1x:niso0_ctx2: initialized (streamid=55, iommu=smmu.0x0000000012000000) [ 5.164430] iommu_context_dev 13e40000.host1x:niso0_ctx3: Adding to iommu group 17 [ 5.164925] iommu_context_dev 13e40000.host1x:niso0_ctx3: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.166566] iommu_context_dev 13e40000.host1x:niso0_ctx4: Adding to iommu group 18 [ 5.167023] iommu_context_dev 13e40000.host1x:niso0_ctx4: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.168650] iommu_context_dev 13e40000.host1x:niso0_ctx5: Adding to iommu group 19 [ 5.169093] iommu_context_dev 13e40000.host1x:niso0_ctx5: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.179737] iommu_context_dev 13e40000.host1x:niso0_ctx6: Adding to iommu group 20 [ 5.186304] iommu_context_dev 13e40000.host1x:niso0_ctx6: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.197766] iommu_context_dev 13e40000.host1x:niso0_ctx7: Adding to iommu group 21 [ 5.204320] iommu_context_dev 13e40000.host1x:niso0_ctx7: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.215786] iommu_context_dev 13e40000.host1x:niso1_ctx0: Adding to iommu group 22 [ 5.222363] iommu_context_dev 13e40000.host1x:niso1_ctx0: initialized (streamid=53, iommu=smmu.0x0000000008000000) [ 5.233805] iommu_context_dev 13e40000.host1x:niso1_ctx1: Adding to iommu group 23 [ 5.240360] iommu_context_dev 13e40000.host1x:niso1_ctx1: initialized (streamid=54, iommu=smmu.0x0000000008000000) [ 5.251826] iommu_context_dev 13e40000.host1x:niso1_ctx2: Adding to iommu group 24 [ 5.258407] iommu_context_dev 13e40000.host1x:niso1_ctx2: initialized (streamid=55, iommu=smmu.0x0000000008000000) [ 5.269848] iommu_context_dev 13e40000.host1x:niso1_ctx3: Adding to iommu group 25 [ 5.276408] iommu_context_dev 13e40000.host1x:niso1_ctx3: initialized (streamid=56, iommu=smmu.0x0000000008000000) [ 5.287878] iommu_context_dev 13e40000.host1x:niso1_ctx4: Adding to iommu group 26 [ 5.294431] iommu_context_dev 13e40000.host1x:niso1_ctx4: initialized (streamid=57, iommu=smmu.0x0000000008000000) [ 5.305906] iommu_context_dev 13e40000.host1x:niso1_ctx5: Adding to iommu group 27 [ 5.312434] iommu_context_dev 13e40000.host1x:niso1_ctx5: initialized (streamid=58, iommu=smmu.0x0000000008000000) [ 5.323940] iommu_context_dev 13e40000.host1x:niso1_ctx6: Adding to iommu group 28 [ 5.330494] iommu_context_dev 13e40000.host1x:niso1_ctx6: initialized (streamid=59, iommu=smmu.0x0000000008000000) [ 5.341963] iommu_context_dev 13e40000.host1x:niso1_ctx7: Adding to iommu group 29 [ 5.348506] iommu_context_dev 13e40000.host1x:niso1_ctx7: initialized (streamid=60, iommu=smmu.0x0000000008000000) [ 5.360022] falcon 15340000.vic: Adding to iommu group 30 [ 5.368903] falcon 15340000.vic: initialized [ 5.369269] falcon 15380000.nvjpg: Adding to iommu group 31 [ 5.377377] falcon 15380000.nvjpg: initialized [ 5.378939] falcon 15540000.nvjpg1: Adding to iommu group 32 [ 5.387700] falcon 15540000.nvjpg1: initialized [ 5.389350] falcon 154c0000.nvenc: Adding to iommu group 33 [ 5.399743] falcon 154c0000.nvenc: initialized [ 5.399993] falcon 15a50000.ofa: Adding to iommu group 34 [ 5.408102] falcon 15a50000.ofa: initialized [ 5.409482] nvdec 15480000.nvdec: Adding to iommu group 35 [ 5.421243] nvdec 15480000.nvdec: initialized [ 5.421500] tsec 15500000.tsec: Adding to iommu group 36 [ 5.429135] tsec 15500000.tsec: initialized [ 5.431165] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.441235] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.450622] gpio-394 (camera-control-output-low): hogged as output/low [ 5.450862] gpio-397 (camera-control-output-low): hogged as output/low [ 5.455244] gpio-487 (camera-control-output-low): hogged as output/low [ 5.461451] gpio-486 (camera-control-output-low): hogged as output/low [ 5.469353] gpiochip0: registered GPIOs 348 to 511 on tegra234-gpio [ 5.475454] gpiochip1: registered GPIOs 316 to 347 on tegra234-gpio-aon [ 5.481013] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.487744] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 5.493165] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.498343] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.505708] misc tegra_camera_ctrl: tegra_camera_isomgr_register tpg_max_iso = 3916800KBs [ 5.512036] tegra194-isp5 14800000.isp: Adding to iommu group 37 [ 5.520413] t194-nvcsi 13e40000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.527300] t194-nvcsi 13e40000.host1x:nvcsi@15a00000: initialized [ 5.533355] tegra194-vi5 13e40000.host1x:vi0@15c00000: Adding to iommu group 38 [ 5.540970] tegra194-vi5 13e40000.host1x:vi1@14c00000: Adding to iommu group 39 [ 5.548079] scare-pigeon 13e40000.host1x:vi0-thi@15f00000: context isolation disabled due to no IOMMU [ 5.557428] scare-pigeon 13e40000.host1x:vi0-thi@15f00000: initialized [ 5.563393] scare-pigeon 13e40000.host1x:vi0-thi@15f00000: grid-of-semaphores not supported [ 5.571495] scare-pigeon 13e40000.host1x:vi1-thi@14f00000: context isolation disabled due to no IOMMU [ 5.581110] scare-pigeon 13e40000.host1x:vi1-thi@14f00000: initialized [ 5.587274] scare-pigeon 13e40000.host1x:vi1-thi@14f00000: grid-of-semaphores not supported [ 5.595730] scare-pigeon 13e40000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 5.605416] scare-pigeon 13e40000.host1x:isp-thi@14b00000: initialized [ 5.611594] scare-pigeon 13e40000.host1x:isp-thi@14b00000: grid-of-semaphores not supported [ 5.620093] pva 16000000.pva0: Adding to iommu group 40 [ 5.643989] pva 16000000.pva0: initialized [ 5.651643] nvdla 15880000.nvdla0: Adding to iommu group 41 [ 5.660710] nvdla 15880000.nvdla0: initialized [ 5.662377] nvdla 158c0000.nvdla1: Adding to iommu group 42 [ 5.671224] nvdla 158c0000.nvdla1: initialized [ 5.672947] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 5.673187] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 5.673559] serial-tegra 3100000.serial: Adding to iommu group 3 [ 5.674075] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 13, base_baud = 0) is a TEGRA_UART [ 5.678156] serial-tegra 3130000.serial: Adding to iommu group 3 [ 5.683818] 3130000.serial: ttyTHS3 at MMIO 0x3130000 (irq = 64, base_baud = 0) is a TEGRA_UART [ 5.716168] tegra-xusb 3610000.xhci: Firmware timestamp: 2021-12-01 05:27:10 UTC, Version: 80.03 release [ 5.716515] tegra-xusb 3610000.xhci: xHCI Host Controller [ 5.716724] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 5.717752] tegra-xusb 3610000.xhci: hcc params 0x0180ff05 hci version 0x120 quirks 0x0000000000050810 [ 5.724237] tegra-xusb 3610000.xhci: irq 232, io mem 0x03610000 [ 5.730352] usb usb1: mogo New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 5.738995] usb usb1: mogo New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.746692] usb usb1: mogo Product: xHCI Host Controller [ 5.752203] usb usb1: mogo Manufacturer: Linux 5.10.65-tegra xhci-hcd [ 5.758591] usb usb1: mogo SerialNumber: 3610000.xhci [ 5.764465] mogo hub probe [ 5.766731] hub 1-0:1.0: USB hub found [ 5.770512] hub 1-0:1.0: 4 ports detected [ 5.774798] tegra-xusb 3610000.xhci: xHCI Host Controller [ 5.780124] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 5.787733] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 5.795057] usb usb2: mogo New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 5.803839] usb usb2: mogo New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.811528] usb usb2: mogo Product: xHCI Host Controller [ 5.816867] usb usb2: mogo Manufacturer: Linux 5.10.65-tegra xhci-hcd [ 5.823254] usb usb2: mogo SerialNumber: 3610000.xhci [ 5.828841] mogo hub probe [ 5.831129] hub 2-0:1.0: USB hub found [ 5.834904] hub 2-0:1.0: 4 ports detected [ 5.840156] bwmgr API not supported [ 5.840161] tegra-xusb 3610000.xhci: can't register EMC bwmgr (-22) [ 5.848984] mogo xudc phy num=4 [ 5.851804] mogo usb2 phy name[usb2-0] [ 5.855724] mogo usb3 phy name[usb3-1] [ 5.859770] mogo UTMI PHY[0] success [ 5.863245] mogo USB3 PHY[0] success [ 5.866924] mogo UTMI PHY[1] success [ 5.870415] mogo USB3 PHY[1] success [ 5.874093] mogo UTMI PHY[2] success [ 5.877591] mogo USB3 PHY[2] success [ 5.881264] mogo UTMI PHY[3] success [ 5.884764] mogo USB3 PHY[3] success [ 5.904236] mogo hub event [ 5.904329] mogo port event [ 5.904421] port1[3],event_bits[18],wakeup_bits[1e] [ 5.904438] mogo hub port connect change [ 5.904677] mogo hub port connect [ 5.913479] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 2010000 KHz, changing to: 2035200 KHz [ 5.919569] cpufreq: cpufreq_online: CPU4: Running at unlisted initial frequency: 2010000 KHz, changing to: 2035200 KHz [ 5.930692] cpufreq: cpufreq_online: CPU8: Running at unlisted initial frequency: 1976000 KHz, changing to: 2035200 KHz [ 5.941302] tegra194-pcie 14100000.pcie: Using GICv2m MSI allocator [ 5.943533] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 5.944950] tegra194-pcie 14100000.pcie: host bridge /pcie@14100000 ranges: [ 5.950690] mmc0: CQHCI version 5.10 [ 5.955996] tegra194-pcie 14100000.pcie: IO 0x0030100000..0x00301fffff -> 0x0030100000 [ 5.957869] irq: IRQ290: trimming hierarchy from :pmc@c360000 [ 5.957902] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 290 [ 5.964211] mogo hub event [ 5.967982] tegra194-pcie 14100000.pcie: MEM 0x20a8000000..0x20afffffff -> 0x0040000000 [ 5.973700] mogo port event [ 5.979965] tegra194-pcie 14100000.pcie: MEM 0x2080000000..0x20a7ffffff -> 0x2080000000 [ 6.002719] port1[3],event_bits[8],wakeup_bits[1e] [ 6.002725] mogo hub port connect change [ 6.011469] mogo hub port connect [ 6.028865] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.032204] usb 1-3: new full-speed USB device number 2 using tegra-xusb [ 6.117242] mmc0: Command Queue Engine enabled [ 6.117364] mmc0: periodic cache flush enabled [ 6.117484] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.117965] mmcblk0: mmc0:0001 G1M15M 59.3 GiB [ 6.118268] mmcblk0rpmb: mmc0:0001 G1M15M partition 3 4.00 MiB, chardev (510:0) [ 6.120336] tegra194-pcie 14100000.pcie: Link up [ 6.121757] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 [ 6.122144] tegra194-pcie 14100000.pcie: PCI host bridge to bus 0001:00 [ 6.122348] pci_bus 0001:00: root bus resource [bus 00-ff] [ 6.122501] pci_bus 0001:00: root bus resource [io 0x0000-0xfffff] (bus address [0x30100000-0x301fffff]) [ 6.122791] pci_bus 0001:00: root bus resource [mem 0x20a8000000-0x20afffffff] (bus address [0x40000000-0x47ffffff]) [ 6.123094] pci_bus 0001:00: root bus resource [mem 0x2080000000-0x20a7ffffff pref] [ 6.123362] pci 0001:00:00.0: [10de:229e] type 01 class 0x060400 [ 6.123650] pci 0001:00:00.0: PME# supported from D0 D3hot [ 6.126989] pci 0001:01:00.0: [10ec:c822] type 00 class 0x028000 [ 6.127273] pci 0001:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 6.129550] pci 0001:01:00.0: reg 0x18: [mem 0x20a8000000-0x20a800ffff 64bit] [ 6.137319] pci 0001:01:00.0: supports D1 D2 [ 6.140874] pci 0001:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 6.150824] pci 0001:00:00.0: BAR 14: assigned [mem 0x20a8000000-0x20a80fffff] [ 6.154964] pci 0001:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 6.161265] pci 0001:01:00.0: BAR 2: assigned [mem 0x20a8000000-0x20a800ffff 64bit] [ 6.169030] pci 0001:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 6.175108] pci 0001:00:00.0: PCI bridge to [bus 01-ff] [ 6.180339] pci 0001:00:00.0: bridge window [io 0x1000-0x1fff] [ 6.184304] usb 1-3: mogo New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 6.186639] pci 0001:00:00.0: bridge window [mem 0x20a8000000-0x20a80fffff] [ 6.195303] usb 1-3: mogo New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 6.202485] pci 0001:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 6.209737] usb 1-3: mogo Product: Bluetooth Radio [ 6.209740] usb 1-3: mogo Manufacturer: Realtek [ 6.218273] pci 0001:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 6.223125] usb 1-3: mogo SerialNumber: 00e04c000001 [ 6.225472] mogo port event [ 6.227976] pcieport 0001:00:00.0: Adding to iommu group 10 [ 6.236252] port1[4],event_bits[10],wakeup_bits[1e] [ 6.236260] mogo hub port connect change [ 6.241222] pcieport 0001:00:00.0: PME: Signaling with IRQ 50 [ 6.243949] mogo hub port connect [ 6.250079] pcieport 0001:00:00.0: AER: enabled with IRQ 50 [ 6.273966] tegra194-pcie 14160000.pcie: Using GICv2m MSI allocator [ 6.280568] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 6.286484] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 6.294794] tegra194-pcie 14160000.pcie: MEM 0x2428000000..0x242fffffff -> 0x0040000000 [ 6.303277] tegra194-pcie 14160000.pcie: MEM 0x2140000000..0x2427ffffff -> 0x2140000000 [ 6.313049] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 6.354046] usb 2-3: mogo New USB device found, idVendor=0bda, idProduct=0420, bcdDevice= 1.40 [ 6.354273] usb 2-3: mogo New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.354474] usb 2-3: mogo Product: 4-Port USB 3.0 Hub [ 6.354610] usb 2-3: mogo Manufacturer: Generic [ 6.364880] mogo hub probe [ 6.364959] hub 2-3:1.0: USB hub found [ 6.367261] hub 2-3:1.0: 4 ports detected [ 6.472332] usb 1-4: new high-speed USB device number 3 using tegra-xusb [ 6.640793] usb 1-4: mogo New USB device found, idVendor=0bda, idProduct=5420, bcdDevice= 1.40 [ 6.641036] usb 1-4: mogo New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.641247] usb 1-4: mogo Product: 4-Port USB 2.0 Hub [ 6.641395] usb 1-4: mogo Manufacturer: Generic [ 6.643399] mogo hub probe [ 6.643479] hub 1-4:1.0: USB hub found [ 6.644795] hub 1-4:1.0: 4 ports detected [ 6.890081] mogo hub event [ 7.175537] mogo hub event [ 7.421661] tegra194-pcie 14160000.pcie: Phy link never came up [ 7.421877] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 7.422063] pci_bus 0004:00: root bus resource [bus 00-ff] [ 7.422219] pci_bus 0004:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x36100000-0x361fffff]) [ 7.422492] pci_bus 0004:00: root bus resource [mem 0x2428000000-0x242fffffff] (bus address [0x40000000-0x47ffffff]) [ 7.422784] pci_bus 0004:00: root bus resource [mem 0x2140000000-0x2427ffffff pref] [ 7.423032] pci 0004:00:00.0: [10de:229c] type 01 class 0x060400 [ 7.423300] pci 0004:00:00.0: PME# supported from D0 D3hot [ 7.428872] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 7.429015] pci 0004:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 7.429435] pcieport 0004:00:00.0: Adding to iommu group 11 [ 7.429731] pcieport 0004:00:00.0: PME: Signaling with IRQ 52 [ 7.430278] pcieport 0004:00:00.0: AER: enabled with IRQ 52 [ 7.430587] pci_bus 0004:01: busn_res: [bus 01-ff] is released [ 7.430810] pci 0004:00:00.0: Removing from iommu group 11 [ 7.430954] pci_bus 0004:00: busn_res: [bus 00-ff] is released [ 7.438344] tegra194-pcie 141a0000.pcie: Using GICv2m MSI allocator [ 7.442598] vdd-3v3-pcie: supplied by vdd-3v3-sys [ 7.447213] avdd-cam-2v8: supplied by vdd-3v3-sys [ 7.451871] vdd-dp: supplied by vdd-3v3-sys [ 7.456080] vdd-3v3-sd: supplied by vdd-3v3-sys [ 7.460893] dsi-vdd-1v8-bl-en: supplied by vdd-1v8-sys [ 7.467540] tegra194-isp5 14800000.isp: initialized [ 7.476241] tegra194-vi5 13e40000.host1x:vi0@15c00000: initialized [ 7.476966] (NULL device *): fops function table already registered [ 7.483940] tegra194-vi5 13e40000.host1x:vi1@14c00000: initialized [ 7.489787] tegra194-pcie 141a0000.pcie: Using GICv2m MSI allocator [ 7.489862] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 7.510246] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 290 [ 7.601542] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 7.601758] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 7.601996] tegra194-pcie 141a0000.pcie: MEM 0x2b28000000..0x2b2fffffff -> 0x0040000000 [ 7.602233] tegra194-pcie 141a0000.pcie: MEM 0x2740000000..0x2b27ffffff -> 0x2740000000 [ 8.552657] mmc1: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit [ 8.709675] tegra194-pcie 141a0000.pcie: Phy link never came up [ 8.709893] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 8.710088] pci_bus 0005:00: root bus resource [bus 00-ff] [ 8.710236] pci_bus 0005:00: root bus resource [io 0x200000-0x2fffff] (bus address [0x3a100000-0x3a1fffff]) [ 8.710520] pci_bus 0005:00: root bus resource [mem 0x2b28000000-0x2b2fffffff] (bus address [0x40000000-0x47ffffff]) [ 8.710816] pci_bus 0005:00: root bus resource [mem 0x2740000000-0x2b27ffffff pref] [ 8.711058] pci 0005:00:00.0: [10de:229a] type 01 class 0x060400 [ 8.711332] pci 0005:00:00.0: PME# supported from D0 D3hot [ 8.717056] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 8.717202] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 8.717632] pcieport 0005:00:00.0: Adding to iommu group 12 [ 8.717926] pcieport 0005:00:00.0: PME: Signaling with IRQ 54 [ 8.718548] pcieport 0005:00:00.0: AER: enabled with IRQ 54 [ 8.718869] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 8.719116] pci 0005:00:00.0: Removing from iommu group 12 [ 8.719293] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 8.725529] nvethernet 6810000.ethernet: Adding to iommu group 43 [ 8.730782] mogo ether probe [ 8.733254] mogo num dma chans = 10 [ 8.736917] mogo pinctrl select [ 8.740067] mogo: alloc_etherdev_mq [ 8.743753] nvethernet 6810000.ethernet: failed to read skip mac reset flag, default 0 [ 8.751885] mogo mac reset =0 [ 8.755032] mogo mdio_addr =0 [ 8.758013] nvethernet 6810000.ethernet: setting to default DMA bit mask [ 8.764664] nvethernet 6810000.ethernet: failed to read UPHY GBE mode- default to 10G [ 8.772587] nvethernet 6810000.ethernet: failed to get phy reset gpio error: -2 [ 8.783766] nvethernet 6810000.ethernet: Ethernet MAC address: 48:b0:2d:68:d7:f4 [ 8.787463] nvethernet 6810000.ethernet: Macsec not enabled [ 8.792745] nvethernet 6810000.ethernet: Macsec: Reduced MTU: 1466 Max: 16383 [ 8.801994] nvethernet 6810000.ethernet: eth0 (HW ver: 31) created with 10 DMA channels [ 8.808187] irq: IRQ292: trimming hierarchy from :pmc@c360000 [ 8.813526] irq: IRQ293: trimming hierarchy from :interrupt-controller@f400000-1 [ 8.820779] irq: IRQ294: trimming hierarchy from :pmc@c360000 [ 8.826389] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 8.833990] tegra-se-nvhost 15810000.se: Adding to iommu group 44 [ 8.839776] tegra-se-nvhost 15810000.se: initialized [ 8.850738] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 8.851019] tegra-se-nvhost 15820000.se: Adding to iommu group 45 [ 8.857134] tegra-se-nvhost 15820000.se: initialized [ 8.863710] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 8.867824] tegra-se-nvhost 15840000.se: Adding to iommu group 46 [ 8.874237] tegra-se-nvhost 15840000.se: initialized [ 8.881036] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 8.885676] tegra_actmon d230000.actmon: in actmon_register()... [ 8.891236] tegra_actmon d230000.actmon: bwmgr_disable = 1 [ 8.896945] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 8.904774] hvc_sysfs: hypervisor is not present [ 8.942105] ALSA device list: [ 8.942203] No soundcards found. [ 8.942855] Freeing unused kernel memory: 3968K [ 8.956256] Run /init as init process [ 8.966684] Root device found: mmcblk0p1 [ 8.967257] Found dev node: /dev/mmcblk0p1 [ 9.255628] EXT4-fs (mmcblk0p1): recovery complete [ 9.256763] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 9.257799] Rootfs mounted over mmcblk0p1 [ 9.267595] Switching from initrd to actual rootfs [ 9.358200] systemd[1]: System time before build time, advancing clock. [ 9.387906] systemd[1]: systemd 245.4-4ubuntu3.15 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 9.388951] systemd[1]: Detected architecture arm64. [ 9.419550] systemd[1]: Set hostname to . [ 9.586747] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 9.587112] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 9.588005] systemd[1]: Created slice system-modprobe.slice. [ 9.588485] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 9.588890] systemd[1]: Created slice User and Session Slice. [ 9.589149] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 9.589576] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 9.589900] systemd[1]: Reached target User and Group Name Lookups. [ 9.590117] systemd[1]: Reached target Slices. [ 9.590277] systemd[1]: Reached target Swap. [ 9.590606] systemd[1]: Listening on RPCbind Server Activation Socket. [ 9.590901] systemd[1]: Listening on Syslog Socket. [ 9.591145] systemd[1]: Listening on fsck to fsckd communication Socket. [ 9.591400] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 9.592331] systemd[1]: Listening on Journal Audit Socket. [ 9.596366] systemd[1]: Listening on Journal Socket (/dev/log). [ 9.602478] systemd[1]: Listening on Journal Socket. [ 9.607447] systemd[1]: Listening on udev Control Socket. [ 9.612937] systemd[1]: Listening on udev Kernel Socket. [ 9.619221] systemd[1]: Mounting Huge Pages File System... [ 9.624677] systemd[1]: Mounting POSIX Message Queue File System... [ 9.630893] systemd[1]: Mounting RPC Pipe File System... [ 9.636388] systemd[1]: Mounting Kernel Debug File System... [ 9.642125] systemd[1]: Mounting Kernel Trace File System... [ 9.647928] systemd[1]: Starting Journal Service... [ 9.653703] systemd[1]: Starting Set the console keyboard layout... [ 9.659053] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 9.666873] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 9.675918] systemd[1]: Started Nameserver information manager. [ 9.681249] systemd[1]: Reached target Network (Pre). [ 9.687536] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 9.695342] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 9.697008] systemd[1]: Starting Load Kernel Modules... [ 9.710442] systemd[1]: Starting Remount Root and Kernel File Systems... [ 9.716458] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 9.717008] systemd[1]: Starting udev Coldplug all Devices... [ 9.728638] systemd[1]: Started Journal Service. [ 9.742979] nvgpu: Unknown symbol nvlink_shutdown (err -2) [ 9.743164] nvgpu: Unknown symbol nvlink_register_link (err -2) [ 9.743453] nvgpu: Unknown symbol nvlink_unregister_device (err -2) [ 9.748107] systemd-journald[299]: Received client request to flush runtime journal. [ 9.749730] nvgpu: Unknown symbol nvlink_unregister_link (err -2) [ 9.763790] nvgpu: Unknown symbol nvlink_enumerate (err -2) [ 9.769324] nvgpu: Unknown symbol nvlink_transition_intranode_conn_off_to_safe (err -2) [ 9.777497] nvgpu: Unknown symbol nvlink_register_device (err -2) [ 9.783635] nvgpu: Unknown symbol nvlink_train_intranode_conn_safe_to_hs (err -2) [ 10.093819] nvidia: loading out-of-tree module taints kernel. [ 10.107664] nvgpu: Unknown symbol nvlink_shutdown (err -2) [ 10.107861] nvgpu: Unknown symbol nvlink_register_link (err -2) [ 10.108161] nvgpu: Unknown symbol nvlink_unregister_device (err -2) [ 10.108437] nvgpu: Unknown symbol nvlink_unregister_link (err -2) [ 10.109230] nvgpu: Unknown symbol nvlink_enumerate (err -2) [ 10.109402] nvgpu: Unknown symbol nvlink_transition_intranode_conn_off_to_safe (err -2) [ 10.109760] nvgpu: Unknown symbol nvlink_register_device (err -2) [ 10.109994] nvgpu: Unknown symbol nvlink_train_intranode_conn_safe_to_hs (err -2) [ 10.137337] using random self ethernet address2 [ 10.137489] using random host ethernet address2 [ 10.327859] 1 fixed-partitions partitions found on MTD device spi6.0 [ 10.328054] Creating 1 MTD partitions on "spi6.0": [ 10.328191] 0x000000000000-0x000004000000 : "Whole_flash0" [ 10.382212] OF: graph: no port node found in /i2c@c240000/ucsi_ccg@8/connector@0 [ 10.822215] using random self ethernet address2 [ 10.822363] using random host ethernet address2 [ 15.396350] ucsi_ccg 1-0008: failed to reset PPM! [ 15.396687] ucsi_ccg 1-0008: PPM init failed (-110) Ubuntu 20.04.4 LTS mogo-desktop ttyTCU0 mogo-desktop login: