[0000.211] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-1b8ce67c)
[0000.219] I> bit @ 0xd480000
[0000.222] I> Boot-device: eMMC
[0000.226] I> sdmmc bdev is already initialized
[0000.231] I> pmic: reset reason (nverc)        : 0x0
[0000.237] I> Found 16 partitions in SDMMC_BOOT (instance 3)
[0000.245] I> Found 31 partitions in SDMMC_USER (instance 3)
[0000.251] I> A/B: bin_type (16) slot 0
[0000.254] I> Loading partition bpmp-fw at 0xd7800000
[0000.259] I> Reading two headers - addr:0xd7800000 blocks:1
[0000.265] I> Addr: 0xd7800000, start-block: 58777608, num_blocks: 1
[0000.280] I> Binary(16) of size 533504 is loaded @ 0xd7800000
[0000.286] I> A/B: bin_type (17) slot 0
[0000.289] I> Loading partition bpmp-fw-dtb at 0xd79f0000
[0000.294] I> Reading two headers - addr:0xd79f0000 blocks:1
[0000.300] I> Addr: 0xd79f0000, start-block: 58780024, num_blocks: 1
[0000.314] I> Binary(17) of size 465840 is loaded @ 0xd798e200
[0000.492] I> Loading SCE-FW ...
[0000.495] I> A/B: bin_type (12) slot 0
[0000.498] I> Loading partition sce-fw at 0xd7300000
[0000.503] I> Reading two headers - addr:0xd7300000 blocks:1
[0000.509] I> Addr: 0xd7300000, start-block: 58782024, num_blocks: 1
[0000.518] I> Binary(12) of size 125168 is loaded @ 0xd7300000
[0000.524] I> Init SCE
[0000.526] I> Loading APE-FW ...
[0000.529] I> A/B: bin_type (11) slot 0
[0000.533] I> Loading partition adsp-fw at 0xd7400000
[0000.538] I> Reading two headers - addr:0xd7400000 blocks:1
[0000.543] I> Addr: 0xd7400000, start-block: 58761224, num_blocks: 1
[0000.552] I> Binary(11) of size 107808 is loaded @ 0xd7400000
[0000.558] I> Copy BTCM section
[0000.561] I> A/B: bin_type (13) slot 0
[0000.565] I> Loading partition cpu-bootloader at 0x96000000
[0000.570] I> Reading two headers - addr:0x96000000 blocks:1
[0000.576] I> Addr: 0x96000000, start-block: 58740744, num_blocks: 1
[0000.587] I> Binary(13) of size 277776 is loaded @ 0x96000000
[0000.593] I> A/B: bin_type (20) slot 0
[0000.596] I> Loading partition bootloader-dtb at 0x8520f400
[0000.602] I> Reading two headers - addr:0x8520f400 blocks:1
[0000.607] I> Addr: 0x8520f400, start-block: 58742792, num_blocks: 1
[0000.619] I> Binary(20) of size 344080 is loaded @ 0x8520f400
[0000.625] I> A/B: bin_type (14) slot 0
[0000.629] I> Loading partition secure-os at 0x8530f600
[0000.634] I> Reading two headers - addr:0x8530f600 blocks:1
[0000.639] I> Addr: 0x8530f600, start-block: 58744840, num_blocks: 1
[0000.651] I> Binary(14) of size 312752 is loaded @ 0x8530f600
[0000.659] I> TOS boot-params @ 0x85000000
[0000.663] I> TOS params prepared
[0000.666] I> Loading EKS ...
[0000.669] I> A/B: bin_type (15) slot 0
[0000.672] I> Loading partition eks at 0x8590f800
[0000.677] I> Reading two headers - addr:0x8590f800 blocks:1
[0000.682] I> Addr: 0x8590f800, start-block: 58757128, num_blocks: 1
[0000.690] I> Binary(15) of size 1040 is loaded @ 0x8590f800
[0000.695] I> EKB detected (length: 0x400) @ 0x8590f800
[0000.700] I> Copied encrypted keys
[0000.704] I> boot profiler @ 0x275844000
[0000.708] I> boot profiler for TOS @ 0x275844000
[0000.713] I> Unhalting SCE
[0000.715] I> Primary Memory Start:80000000 Size:70000000
[0000.721] I> Extended Memory Start:f0110000 Size:1856f0000
[0000.727] I> MB2(TBoot-BPMP) done

NOTICE:  BL31: v1.3(release):a28d87f09
NOTICE:  BL31: Built : 21:15:42, Aug 12 2019
ipc-unittest-main: 1519: Welcome to IPC unittest!!!
ipc-unittest-main: 1531: waiting forever
ipc-unittest-srv: 329: Init unittest services!!!
keystore-demo: 141: Hello world from keystore-demo app
keystore-demo: 207: main: EKB contents match expected value
exit called, thread 0xffffffffea87ad58, name trusty_app_2_7d18fc60-e9fc-11e8
platform_bootstrap_epilog: trusty bootstrap complete
[0001.088] I> Welcome to Cboot
[0001.090] I> Cboot Version: t186-dcb303f9
[0001.094] I> CPU-BL Params @ 0x275800000
[0001.098] I>  0) Base:0x00000000 Size:0x00000000
[0001.102] I>  1) Base:0x277f00000 Size:0x00100000
[0001.107] I>  2) Base:0x277e00000 Size:0x00100000
[0001.111] I>  3) Base:0x277d00000 Size:0x00100000
[0001.116] I>  4) Base:0x277c00000 Size:0x00100000
[0001.120] I>  5) Base:0x277b00000 Size:0x00100000
[0001.125] I>  6) Base:0x277800000 Size:0x00200000
[0001.129] I>  7) Base:0x277400000 Size:0x00400000
[0001.134] I>  8) Base:0x277a00000 Size:0x00100000
[0001.138] I>  9) Base:0x277300000 Size:0x00100000
[0001.143] I> 10) Base:0x276800000 Size:0x00800000
[0001.148] I> 11) Base:0x30000000 Size:0x00040000
[0001.152] I> 12) Base:0xf0000000 Size:0x00100000
[0001.156] I> 13) Base:0x30040000 Size:0x00001000
[0001.161] I> 14) Base:0x30048000 Size:0x00001000
[0001.165] I> 15) Base:0x30049000 Size:0x00001000
[0001.170] I> 16) Base:0x3004a000 Size:0x00001000
[0001.174] I> 17) Base:0x3004b000 Size:0x00001000
[0001.179] I> 18) Base:0x3004c000 Size:0x00001000
[0001.183] I> 19) Base:0x3004d000 Size:0x00001000
[0001.187] I> 20) Base:0x3004e000 Size:0x00001000
[0001.192] I> 21) Base:0x3004f000 Size:0x00001000
[0001.196] I> 22) Base:0x00000000 Size:0x00000000
[0001.201] I> 23) Base:0xf0100000 Size:0x00010000
[0001.205] I> 24) Base:0x00000000 Size:0x00000000
[0001.210] I> 25) Base:0x00000000 Size:0x00000000
[0001.214] I> 26) Base:0x00000000 Size:0x00000000
[0001.218] I> 27) Base:0x00000000 Size:0x00000000
[0001.223] I> 28) Base:0x84400000 Size:0x00400000
[0001.227] I> 29) Base:0x30000000 Size:0x00010000
[0001.232] I> 30) Base:0x278000000 Size:0x08000000
[0001.236] I> 31) Base:0x00000000 Size:0x00000000
[0001.241] I> 32) Base:0x276000000 Size:0x00600000
[0001.245] I> 33) Base:0x80000000 Size:0x70000000
[0001.250] I> 34) Base:0xf0110000 Size:0x1856f0000
[0001.254] I> 35) Base:0x00000000 Size:0x00000000
[0001.259] I> 36) Base:0x00000000 Size:0x00000000
[0001.263] I> 37) Base:0x2772e0000 Size:0x00020000
[0001.268] I> 38) Base:0x84000000 Size:0x00400000
[0001.272] I> 39) Base:0x96000000 Size:0x02000000
[0001.276] I> 40) Base:0x85000000 Size:0x01200000
[0001.281] I> 41) Base:0x275800000 Size:0x00500000
[0001.285] I> 42) Base:0x00000000 Size:0x00000000
[0001.290] I> 43) Base:0x00000000 Size:0x00000000
[0001.294] GIC-SPI Target CPU: 4
[0001.298] Interrupts Init done
[0001.301] calling constructors
[0001.304] initializing heap
[0001.307] initializing threads
[0001.310] initializing timers
[0001.313] creating bootstrap completion thread
[0001.318] top of bootstrap2()
[0001.321] CPU: ARM Cortex A57
[0001.325] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100
[0001.330] initializing platform
[0001.333] I> Boot-device: eMMC
[0001.337] I> sdmmc bdev is already initialized
[0001.343] I> Found 16 partitions in SDMMC_BOOT (instance 3)
[0001.350] I> Found 31 partitions in SDMMC_USER (instance 3)
[0001.355] W> opt-in fuse is not set, skip fuse_burning
[0001.360] I> Reserved memory at 0xfbe00000 for U-Boot relocation
[0001.366] I> A/B: bin_type (21) slot 0
[0001.369] I> Loading partition kernel-dtb at 0x80000000 from device(0x1)
[0001.383] I> Kernel_dtb @0x80000000
[0001.386] I> Bl_dtb @0x8520f400
[0001.389] I> gpio framework initialized
[0001.395] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio' driver
[0001.405] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio-aon' driver
[0001.413] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee
[0001.421] E> I2C: slave not found in slaves.
[0001.425] E> I2C: Could not write 0 bytes to slave: 0x00ee with repeat start false.
[0001.433] E> I2C_DEV: Failed to send register address 0x00000004.
[0001.439] E> I2C_DEV: Could not write 1 registers of size 1 to slave 0xee at 0x00000004 via instance 0.
[0001.448] E> tca9539_device_init: failed to write polar reg
[0001.454] E> tegrabl_tca9539_init: failed to init device!
[0001.459] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xe8
[0001.466] E> I2C: slave not found in slaves.
[0001.470] E> I2C: Could not write 0 bytes to slave: 0x00e8 with repeat start false.
[0001.478] E> I2C_DEV: Failed to send register address 0x00000004.
[0001.484] E> I2C_DEV: Could not write 1 registers of size 1 to slave 0xe8 at 0x00000004 via instance 0.
[0001.493] E> tca9539_device_init: failed to write polar reg
[0001.498] E> tegrabl_tca9539_init: failed to init device!
[0001.506] I> fixed regulator driver initialized
[0001.537] I> register 'maxim' power off handle
[0001.543] I> virtual i2c enabled
[0001.546] I> registered 'maxim,max77620' pmic
[0001.551] I> tegrabl_gpio_driver_register: register 'max77620-gpio' driver
[0001.563] I> Find /i2c@c250000's alias i2c7
[0001.567] I> Reading eeprom i2c=7 address=0x50
[0001.597] I> Device at /i2c@c250000:0x50
[0001.601] I> Reading eeprom i2c=7 address=0x57
[0001.605] E> I2C: slave not found in slaves.
[0001.609] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true.
[0001.617] E> I2C_DEV: Failed to send register address 0x00000000.
[0001.623] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 7.
[0001.632] E> eeprom: Failed to read I2C slave device
[0001.637] I> Eeprom read failed 0x3526070d
[0001.642] I> Find /i2c@c240000's alias i2c1
[0001.646] I> Reading eeprom i2c=1 address=0x51
[0001.651] E> I2C: slave not found in slaves.
[0001.655] E> I2C: Could not write 0 bytes to slave: 0x00a2 with repeat start true.
[0001.663] E> I2C_DEV: Failed to send register address 0x00000000.
[0001.669] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa2 at 0x00000000 via instance 1.
[0001.678] E> eeprom: Retry to read I2C slave device.
[0001.683] E> I2C: slave not found in slaves.
[0001.687] E> I2C: Could not write 0 bytes to slave: 0x00a2 with repeat start true.
[0001.695] E> I2C_DEV: Failed to send register address 0x00000000.
[0001.701] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa2 at 0x00000000 via instance 1.
[0001.710] E> eeprom: Failed to read I2C slave device
[0001.715] I> Eeprom read failed 0x3526070d
[0001.719] I> Find /i2c@3160000's alias i2c0
[0001.723] I> Reading eeprom i2c=0 address=0x50
[0001.728] E> I2C: slave not found in slaves.
[0001.732] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true.
[0001.740] E> I2C_DEV: Failed to send register address 0x00000000.
[0001.746] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 0.
[0001.755] E> eeprom: Failed to read I2C slave device
[0001.760] I> Eeprom read failed 0x3526070d
[0001.765] I> Find /i2c@3180000's alias i2c2
[0001.769] I> Reading eeprom i2c=2 address=0x54
[0001.773] I> Enabling gpio chip_id = 2, gpio pin = 9
[0001.778] C> GPIO driver for chip_id 0x2 could not be found
[0001.783] E> cam_eeprom_read: Can't get gpio driver
[0001.788] I> Eeprom read failed 0x4d4d000d
[0001.792] I> Reading eeprom i2c=2 address=0x57
[0001.796] I> Enabling gpio chip_id = 2, gpio pin = 9
[0001.801] C> GPIO driver for chip_id 0x2 could not be found
[0001.806] E> cam_eeprom_read: Can't get gpio driver
[0001.811] I> Eeprom read failed 0x4d4d000d
[0001.815] I> create_pm_ids: id: 3310-1000-D01-B, len: 15
[0001.820] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
[0001.852] I> enabling 'vdd-hdmi' regulator
[0001.856] E> tegrabl_display_get_pdata, failed to parse dtb settings
[0001.865] E> cannot find any other nvdisp nodes
[0001.869] E> no valid display unit config found in dtb
[0001.875] W> display init failed
[0001.878] initializing target
[0001.881] calling apps_init()
[0001.884] starting app kernel_boot_app
[0001.890] I> found decompressor handler: lz4-legacy
[0001.895] I> decompressing BMP blob ...
[0001.905] I> Kernel type = Normal
[0001.908] I> Loading kernel from partition ...
[0001.912] I> A/B: bin_type (24) slot 0
[0001.917] I> Boot image load address: 0x0x80400000
[0001.922] I> Loading partition kernel at 0x80400000 from device(0x1)
[0002.683] I> Kernel hdr @0x80400000
[0002.687] I> Kernel dtb @0x80000000
[0002.690] I> T18x: Authenticate boot.img (bin_type 24), max size 0x4000000
[0002.697] E> kernel boot failed