octo-desktop login: [ 290.469760] watchdog: watchdog0: watchdog did not stop! [ 290.471922] systemd-shutdow: 53 output lines suppressed due to ratelimiting [ 290.937622] reboot: Restarting system ����Shutdown state requested 1 Rebooting system ... �� [0000.054] W> RATCHET: MB1 binary ratchet value 4 is too large than ratchet level 2 from HW fuses. [0000.062] I> MB1 (prd-version: 1.5.1.9-t194-41334769-73a9b7ef) [0000.067] I> Boot-mode: Coldboot [0000.070] I> Chip revision : A02P [0000.073] I> Bootrom patch version : 15 (correctly patched) [0000.079] I> ATE fuse revision : 0x200 [0000.082] I> Ram repair fuse : 0x0 [0000.085] I> Ram Code : 0x2 [0000.088] I> rst_source : 0xb [0000.090] I> rst_level : 0x1 [0000.094] I> Boot-device: eMMC [0000.109] I> sdmmc DDR50 mode [0000.113] W> No valid slot number is found in scratch register [0000.118] W> Return default slot: _a [0000.122] I> Active Boot chain : 0 [0000.125] I> Boot-device: eMMC [0000.129] W> MB1_PLATFORM_CONFIG: device prod data is empty in MB1 BCT. [0000.135] I> Temperature = 36000 [0000.138] W> Skipping boost for clk: BPMP_CPU_NIC [0000.142] W> Skipping boost for clk: BPMP_APB [0000.146] W> Skipping boost for clk: AXI_CBB [0000.150] W> Skipping boost for clk: AON_CPU_NIC [0000.154] W> Skipping boost for clk: CAN1 [0000.158] W> Skipping boost for clk: CAN2 [0000.162] I> Boot-device: eMMC [0000.165] I> Boot-device: eMMC [0000.175] I> Sdmmc: HS400 mode enabled [0000.179] I> ECC region[0]: Start:0x0, End:0x0 [0000.183] I> ECC region[1]: Start:0x0, End:0x0 [0000.187] I> ECC region[2]: Start:0x0, End:0x0 [0000.192] I> ECC region[3]: Start:0x0, End:0x0 [0000.196] I> ECC region[4]: Start:0x0, End:0x0 [0000.200] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.206] I> Non-ECC region[1]: Start:0x0, End:0x0 [0000.210] I> Non-ECC region[2]: Start:0x0, End:0x0 [0000.214] I> Non-ECC region[3]: Start:0x0, End:0x0 [0000.219] I> Non-ECC region[4]: Start:0x0, End:0x0 [0000.224] E> FAILED: Thermal config [0000.232] E> FAILED: MEMIO rail config [0000.250] I> Boot-device: eMMC [0000.260] I> sdmmc bdev is already initialized [0000.335] I> MB1 done ����main enter SPE VERSION #: R01.00.14 Created: Sep 19 2018 @ 11:03:21 HW Function test Start Scheduler. in late init �� [0000.343] I> Welcome to MB2(TBoot-BPMP) (version: 00.00.2018.32-mobile-6fc80c72) [0000.344] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.344] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.345] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.351] W> device prod register failed [0000.355] I> gpio framework initialized [0000.358] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.366] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.373] I> No valid sdcard_params in mb1_bct [0000.378] I> Boot-device: eMMC [0000.380] I> Boot_device: SDMMC_BOOT instance: 3 [0000.390] I> sdmmc-3 params source = boot args [0000.390] I> sdmmc bdev is already initialized [0000.393] I> sdmmc-3 params source = boot args [0000.427] I> Found 17 partitions in SDMMC_BOOT (instance 3) [0000.443] I> Found 42 partitions in SDMMC_USER (instance 3) [0000.444] W> No valid slot number is found in scratch register [0000.445] W> Return default slot: _a [0000.445] I> Active Boot chain : 0 [0000.452] I> parsing oem signed section of bpmp-fw header done [0000.459] I> bpmp-fw binary init read from storage [0000.459] I> oem authentication of bpmp-fw header done [0000.462] I> bpmp-fw binary done read from storage [0000.462] I> bpmp-fw: Authentication init Done [0000.469] I> parsing oem signed section of cpubl header done [0000.476] I> cpubl binary init read from storage [0000.476] I> bpmp-fw: Authentication Finalize Done [0000.477] I> oem authentication of cpubl header done [0000.480] I> cpubl binary done read from storage [0000.484] I> cpubl: Authentication init Done [0000.495] I> parsing oem signed section of rce header done [0000.501] I> rce binary init read from storage [0000.502] I> Relocating BR-BCT [0000.503] I> cpubl: Authentication Finalize Done [0000.506] I> oem authentication of rce header done [0000.510] I> rce binary done read from storage [0000.514] I> rce: Authentication init Done [0000.524] I> parsing oem signed section of ape header done [0000.531] I> ape binary init read from storage [0000.532] I> rce: Authentication Finalize Done [0000.533] I> oem authentication of ape header done [0000.537] I> ape binary done read from storage [0000.541] I> ape: Authentication init Done [0000.551] I> parsing oem signed section of tos header done [0000.558] I> tos binary init read from storage [0000.558] I> ape: Authentication Finalize Done [0000.560] I> oem authentication of tos header done [0000.564] I> tos binary done read from storage [0000.568] I> tos: Authentication init Done [0000.578] I> parsing oem signed section of bpmp-fw-dtb header done [0000.585] I> bpmp-fw-dtb binary init read from storage [0000.585] I> tos: Authentication Finalize Done [0000.589] I> oem authentication of bpmp-fw-dtb header done [0000.595] I> bpmp-fw-dtb binary done read from storage [0000.597] I> bpmp-fw-dtb: Authentication init Done [0000.608] I> parsing oem signed section of cpubl-dtb header done [0000.615] I> cpubl-dtb binary init read from storage [0000.615] I> bpmp-fw-dtb: Authentication Finalize Done [0000.650] I> oem authentication of cpubl-dtb header done [0000.651] I> cpubl-dtb binary done read from storage [0000.651] I> cpubl-dtb: Authentication init Done [0000.658] I> parsing oem signed section of eks header done [0000.665] I> eks binary init read from storage [0000.665] I> cpubl-dtb: Authentication Finalize Done [0000.666] I> oem authentication of eks header done [0000.666] I> eks binary done read from storage [0000.667] I> eks: Authentication init Done [0000.667] I> eks: Authentication Finalize Done [0000.671] I> EKB detected (length: 0x410) @ VA:0x52700400 ��NOTICE: BL31: v1.3(release):b5eeb33f7 NOTICE: BL31: Built : 08:55:29, Feb 19 2022 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! hwkey-agent: 41: hwkey-agent is running!! hwkey-agent: 347: key_mgnt_processing ....... hwkey-agent: 255: Setting EKB key 0 to slot 14 hwkey-agent: 178: Init hweky-agent services!! luks-srv: 40: luks-srv is running!! luks-srv: 157: Init luks-srv IPC services!! platform_bootstrap_epilog: trusty bootstrap complete �� welcome to lk calling constructors initializing heap creating bootstrap completion thread top of bootstrap2() initializing platform bpmp: platform_init tag is e73a758761f0c6d24a1e69a2ac6b5035 tag_show initialized dt initialized mail initialized chipid initialized fuse initialized sku initialized speedo initialized ec_get_ec_list: found 45 ecs ec initialized ec_mrq initialized vmon_populate_monitors: found 3 monitors vmon initialized adc initialized fmon_populate_monitors: found 73 monitors fmon initialized fmon_mrq initialized reset initialized nvhs initialized 392 clocks registered WARNING: pll_c4 has no dyn ramp clk_mrq_init: mrq handler registered clk initialized nvlink initialized io_dpd initialized io_dpd initialized thermal initialized i2c5 controller initialized initialized i2c mrq handling i2c initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized pg_late initialized strap initialized tag initialized emc initialized clk_dt initialized avfs_ccplex_platform initialized tj_max: dt node not found tj_init initialized uphy_mrq_init: mrq handler registered uphy_dt initialized uphy initialized safereg_init: period 80 ms ec_late initialized mrq initialized �� [0001.173] I> Welcome to Cboot ��fmon_post initialized ��[0001.173] I> Cboot Version: t194-63226c45 [0001.173] I> CPU-BL Params @ 0xf2820000 [0001.174] I> 0) Base:0x00000000 Size:0x00000000 [0001.177] I> 1) Base:0xf1100000 Size:0x00100000 [0001.182] I> 2) Base:0xf2000000 Size:0x00200000 [0001.186] I> 3) Base:0xf1200000 Size:0x00200000 ��clk_set_parent failed for clk i2c2, parent pll_aon (-22) clk_set_parent failed for clk i2c8, parent pll_aon (-22) clk_dt_late initialized machine_check initialized pm_post initialized dbells initialized avfs_clk_platform_post initialized dmce initialized cvc initialized ccplex_avfs_hw_init: nafll_cluster0: not monitored ccplex_avfs_hw_init: nafll_cluster1: not monitored ccplex_avfs_hw_init: nafll_cluster2: not monitored ccplex_avfs_hw_init: nafll_cluster3: not monitored avfs_clk_mach_post initialized regulator_post initialized rm initialized sc7_diag initialized thermal_test initialized serial_late initialized clk_post initialized clk_dt_post initialized mc_reg initialized pg_post initialized dyn_modules initialized sku_debugfs initialized speedo_debugfs initialized adc_debugfs initialized clk_debugfs initialized ��[0001.191] I> 4) Base:0xf1000000 Size:0x00100000 [0001.270] I> 5) Base:0xf0f00000 Size:0x00100000 [0001.275] I> 6) Base:0xf3800000 Size:0x00400000 [0001.279] I> 7) Base:0xf1c00000 Size:0x00400000 [0001.284] I> 8) Base:0xf0e00000 Size:0x00100000 [0001.288] I> 9) Base:0xf0d00000 Size:0x00100000 [0001.292] I> 10) Base:0xf3000000 Size:0x00800000 [0001.297] I> 11) Base:0x40000000 Size:0x00040000 [0001.301] I> 12) Base:0xf0c00000 Size:0x00100000 [0001.306] I> 13) Base:0x40046000 Size:0x00002000 [0001.310] I> 14) Base:0x40048000 Size:0x00002000��emc_debugfs initialized dvs_debugfs initialized �� [0001.320] I> 15) Base:0xac000000 Size:0x00004000 ��fmon_debugfs initialized vmon_debugfs initialized pg_debugfs initialized profile_fs initialized debugfs_cons initialized mail_fs initialized profile initialized cvc_debugfs initialized dmce_debugfs initialized ec_debugfs initialized rm_debugfs initialized soctherm_debug initialized gr_reader initialized mods initialized dt_fs initialized debugfs_mrq initialized debug_mrq initialized debug_safereg initialized initializing target calling apps_init() starting app shell entering main console loop ] ��[0001.324] I> 16) Base:0x4004a000 Size:0x00002000 [0001.374] I> 17) Base:0xf0b00000 Size:0x00100000 [0001.379] I> 18) Base:0x4004c000 Size:0x00002000 [0001.383] I> 19) Base:0xf2200000 Size:0x00600000 [0001.388] I> 20) Base:0x4004e000 Size:0x00002000 [0001.392] I> 21) Base:0xf0ad0000 Size:0x0000c000 [0001.397] I> 22) Base:0x00000000 Size:0x00000000 [0001.401] I> 23) Base:0xf0ae0000 Size:0x00020000 [0001.406] I> 24) Base:0xf6000000 Size:0x02000000 [0001.410] I> 25) Base:0x40050000 Size:0x00002000 [0001.415] I> 26) Base:0x40040000 Size:0x00006000 [0001.419] I> 27) Base:0xf1800000 Size:0x00400000 [0001.424] I> 28) Base:0xf4c00000 Size:0x01400000 [0001.428] I> 29) Base:0xf1400000 Size:0x00400000 [0001.432] I> 30) Base:0x00000000 Size:0x00000000 [0001.437] I> 31) Base:0x00000000 Size:0x00000000 [0001.441] I> 32) Base:0xf8000000 Size:0x08000000 [0001.446] I> 33) Base:0x00000000 Size:0x00000000 [0001.450] I> 34) Base:0xf3c00000 Size:0x01000000 [0001.455] I> 35) Base:0xab000000 Size:0x01000000 [0001.459] I> 36) Base:0xa0000000 Size:0x0b000000 [0001.464] I> 37) Base:0xf2800000 Size:0x00800000 [0001.468] I> 38) Base:0x80000000 Size:0x20000000 [0001.473] I> 39) Base:0xb0000000 Size:0x08000000 [0001.477] I> 40) Base:0x00000000 Size:0x00000000 [0001.482] I> 41) Base:0x00000000 Size:0x00000000 [0001.486] I> 42) Base:0x00000000 Size:0x00000000 [0001.490] I> 43) Base:0x00000000 Size:0x00000000 [0001.495] I> 44) Base:0x00000000 Size:0x00000000 [0001.499] I> 45) Base:0x00000000 Size:0x00000000 [0001.504] GIC-SPI Target CPU: 0 [0001.507] Interrupts Init done [0001.510] calling constructors [0001.513] initializing heap [0001.515] I> Heap: [0xa0699b80 ... 0xab000000] [0001.520] initializing threads [0001.522] initializing timers [0001.525] creating bootstrap completion thread [0001.530] top of bootstrap2() [0001.532] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0001.537] initializing platform [0001.540] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0001.545] W> device prod register failed [0001.549] I> Bl_dtb @0xaaf00000 [0001.556] W> "plugin-manager" doesn't exist, creating [0001.557] W> "ids" doesn't exist, creating [0001.561] W> "connection" doesn't exist, creating [0001.566] W> "configs" doesn't exist, creating [0001.582] E> failed to read label property for node 227404: 13 [0001.584] E> failed to read reg property for node 227492: 13 [0001.587] E> failed to read label property for node 227544: 13 [0001.589] E> failed to read label property for node 227612: 13 [0001.594] E> failed to read label property for node 227648: 13 [0001.599] E> failed to read label property for node 227684: 13 [0001.605] E> failed to read reg property for node 227752: 13 [0001.610] E> failed to read label property for node 227804: 13 [0001.618] I> Find /i2c@3160000's alias i2c0 [0001.619] I> Reading eeprom i2c=0 address=0x50 [0001.649] I> Device at /i2c@3160000:0x50 [0001.649] I> Reading eeprom i2c=0 address=0x56 [0001.673] I> Device at /i2c@3160000:0x56 [0001.675] I> Find /i2c@3180000's alias i2c2 [0001.675] I> Reading eeprom i2c=2 address=0x54 [0001.676] E> I2C: slave not found in slaves. [0001.677] E> I2C: Could not write 0 bytes to slave: 0x00a8 with repeat start true. [0001.678] E> I2C_DEV: Failed to send register address 0x00000000. [0001.678] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa8 at 0x00000000 via instance 2. [0001.687] E> eeprom: Failed to read I2C slave device [0001.692] I> Eeprom read failed 0x3526070d [0001.696] I> Reading eeprom i2c=2 address=0x57 [0001.701] E> I2C: slave not found in slaves. [0001.705] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true. [0001.712] E> I2C_DEV: Failed to send register address 0x00000000. [0001.718] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 2. [0001.727] E> eeprom: Failed to read I2C slave device [0001.732] I> Eeprom read failed 0x3526070d [0001.736] I> Reading eeprom i2c=2 address=0x52 [0001.741] E> I2C: slave not found in slaves. [0001.745] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0001.752] E> I2C_DEV: Failed to send register address 0x00000000. [0001.758] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 2. [0001.767] E> eeprom: Failed to read I2C slave device [0001.772] I> Eeprom read failed 0x3526070d [0001.777] I> Find /i2c@c240000's alias i2c1 [0001.780] I> Reading eeprom i2c=1 address=0x52 [0001.786] E> I2C: slave not found in slaves. [0001.789] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0001.797] E> I2C_DEV: Failed to send register address 0x00000000. [0001.802] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 1. [0001.812] E> eeprom: Retry to read I2C slave device. [0001.817] E> I2C: slave not found in slaves. [0001.821] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0001.828] E> I2C_DEV: Failed to send register address 0x00000000. [0001.834] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 1. [0001.843] E> eeprom: Failed to read I2C slave device [0001.848] I> Eeprom read failed 0x3526070d [0001.852] I> Reading eeprom i2c=1 address=0x50 [0001.857] E> I2C: slave not found in slaves. [0001.861] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0001.868] E> I2C_DEV: Failed to send register address 0x00000000. [0001.874] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 1. [0001.884] E> eeprom: Retry to read I2C slave device. [0001.888] E> I2C: slave not found in slaves. [0001.892] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0001.900] E> I2C_DEV: Failed to send register address 0x00000000. [0001.906] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 1. [0001.915] E> eeprom: Failed to read I2C slave device [0001.920] I> Eeprom read failed 0x3526070d [0001.924] I> create_pm_ids: id: 2888-0004-400-K, len: 15 [0001.929] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.940] I> create_pm_ids: id: 2822-0000-700-J, len: 15 [0001.945] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.956] I> Adding plugin-manager/ids/2888-0004-400=/i2c@3160000:module@0x50 [0001.964] W> "i2c@3160000" doesn't exist, creating [0001.968] W> "module@0x50" doesn't exist, creating [0001.973] I> Adding plugin-manager/ids/2822-0000-700=/i2c@3160000:module@0x56 [0001.980] W> "module@0x56" doesn't exist, creating [0001.986] I> Adding plugin-manager/cvm [0001.988] W> "chip-id" doesn't exist, creating [0001.992] I> Adding plugin-manager/chip-id/A02P [0001.997] I> Plugin-manager override starting [0002.002] I> node /plugin-manager/fragement-tegra-wdt-en matches [0002.010] I> node /plugin-manager/fragement-soft-wdt matches [0002.019] I> node /plugin-manager/fragment-pcie-c5-rp matches [0002.023] I> node /plugin-manager/fragment-tegra-ufs-lane10 matches [0002.035] I> Disable plugin-manager status in FDT [0002.035] I> Plugin-manager override finished successfully [0002.036] I> gpio framework initialized [0002.039] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0002.046] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0002.053] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x46 [0002.060] W> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0002.068] W> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0002.074] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0002.080] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x44 [0002.088] W> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0002.096] W> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0002.102] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0002.110] I> fixed regulator driver initialized [0002.120] I> register 'maxim' power off handle [0002.120] I> virtual i2c enabled [0002.121] I> registered 'maxim,max20024' pmic [0002.124] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0002.131] I> Boot-device: eMMC [0002.134] I> Boot_device: SDMMC_BOOT instance: 3 [0002.142] I> sdmmc-3 params source = boot args [0002.143] I> create_pm_ids: id: 2888-0004-400-K, len: 15 [0002.148] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.159] I> create_pm_ids: id: 2822-0000-700-J, len: 15 [0002.164] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.175] I> sdmmc bdev is already initialized [0002.179] I> sdmmc-3 params source = boot args [0002.210] I> Found 17 partitions in SDMMC_BOOT (instance 3) [0002.222] I> Found 42 partitions in SDMMC_USER (instance 3) [0002.234] I> enabling 'vdd-hdmi-5v0' regulator [0002.239] I> regulator 'vdd-hdmi-5v0' already enabled [0002.240] I> hdmi cable connected [0002.242] W> set volts not configured for 'vdd-1v0' [0002.244] W> set volts not configured for 'vdd-1v8-hs' [0002.245] I> retrieved tmds range from prod_list_hdmi_soc [0002.249] E> invalid display type [0002.253] E> invalid display type [0002.254] E> cannot find any other nvdisp nodes [0002.269] I> edid read success [0002.282] I> edid read success [0002.282] I> width = 640, height = 480, frequency = 25174825 [0002.283] I> width = 640, height = 480, frequency = 25174825 [0002.283] I> width = 1920, height = 1200, frequency = 154000000 [0002.283] I> width = 1920, height = 1080, frequency = 148500000 [0002.284] I> width = 1920, height = 1080, frequency = 148351648 [0002.288] I> width = 1280, height = 720, frequency = 74175824 [0002.294] I> width = 720, height = 480, frequency = 26973026 [0002.299] I> width = 720, height = 480, frequency = 26973026 [0002.305] I> width = 640, height = 480, frequency = 25174825 [0002.310] I> width = 1920, height = 1080, frequency = 148351648 [0002.316] I> width = 720, height = 576, frequency = 26973026 [0002.321] I> width = 1280, height = 720, frequency = 74175824 [0002.327] I> width = 1920, height = 1080, frequency = 74175824 [0002.333] I> width = 1920, height = 1080, frequency = 74175824 [0002.338] I> width = 1920, height = 1080, frequency = 74175824 [0002.344] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0002.354] I> hdmi_enable, starting HDMI initialisation [0002.359] I> hdmi_enable, HDMI initialisation complete [0002.370] I> Load in CBoot Boot Options partition and parse it [0002.376] I> boot-order :- [0002.376] I> 1.nvme [0002.377] I> 2.usb [0002.377] I> 3.sd [0002.377] I> 4.emmc [0002.377] I> 5.net [0002.378] W> parse_ip_info: tftp-server-ip info not found in CBO options file [0002.385] W> parse_ip_info: static-ip info not found in CBO options file [0002.391] W> Failed to parse GUID [0002.395] I> boot-dev-order :- [0002.397] I> 1.nvme [0002.399] I> 2.usb [0002.401] I> 3.sd [0002.403] I> 4.emmc [0002.405] I> 5.net [0002.407] I> Hit any key to stop autoboot: 4 3 2 1 [0004.414] initializing target [0004.414] calling apps_init() [0004.415] starting app kernel_boot_app [0004.434] I> found decompressor handler: lz4-legacy [0004.435] I> decompressing BMP blob ... [0004.446] I> Kernel type = Normal [0004.446] I> ########## NVME (0) boot ########## [0004.447] I> Initializing nvme device instance 0 [0004.447] I> Initializing nvme controller [0004.447] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14180000 [0004.448] I> vpcie3v3-supply not found [0004.448] I> vpcie12v-supply not found [0004.450] W> Failed to get nvidia,plat-gpios [0004.454] I> tegrabl_pcie_soc_preinit: (0): [0004.459] I> Unpowergate [0004.461] I> tegrabl_car_clk_disable(0) ... [0004.465] I> tegrabl_car_rst_set(CORE, 0) ... [0004.469] I> tegrabl_car_rst_set(APB, 0) ... [0004.473] I> tegrabl_car_clk_enable(0) ... [0004.477] I> tegrabl_car_rst_clear(APB, 0) ... [0004.481] I> tegrabl_set_ctrl_state(0) [0004.485] I> CLR PCIE_APB:6 [0004.488] I> tegrabl_pcie_soc_init: (0): [0004.491] I> APPL initialization ... [0004.495] I> poweron phys [0004.497] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14180000 [0004.504] I> tegrabl_power_on_phy: power on phy @0x3e30000 [0004.509] I> tegrabl_power_on_phy: power on phy @0x3e40000 [0004.514] I> tegrabl_power_on_phy: power on phy @0x3e50000 [0004.520] I> tegrabl_power_on_phy: power on phy @0x3e60000 [0004.652] I> PCIe controller-0 link is up [0004.653] I> tegra_pcie_info[0].cfg0_base = 0x38000000 [0004.653] I> tegra_pcie_info[0].cfg1_base = 0x38020000 [0004.653] I> tegra_pcie_info[0].atu_dma_base = 0x38040000 [0004.654] I> tegra_pcie_bus[0].mem = 0x38200000 [0004.654] I> Scanning busnr: 0 devfn: 0 [0004.654] I> PCIe IDs: 0x1ad010de [0004.657] I> PCIe RID_CC: 0x60400a1 [0004.661] I> Scanning busnr: 1 devfn: 0 [0004.664] I> PCIe IDs: 0xa808144d [0004.668] I> PCIe RID_CC: 0x1080200 [0004.671] I> PCI Config: I/O=0x38100000, Memory=0x38200000 [0004.676] I> MEM64 bar_num=0 bar=0x38200000 [0004.680] I> Number of PCIe devices detected: 2 [0004.685] I> NVME page size: 4096 [0004.689] I> NVMe serial number: S4EVNS0N610399B [0004.693] I> NVMe model number: Samsung SSD 970 EVO Plus 500GB [0004.699] I> NVMe firmware revision: 2B2QEXM7 [0004.704] I> block_count: 976773168 [0004.707] I> supported_lba: 0 [0004.710] I> block_size_log2: 0x9 [0004.713] I> tegrabl_create_io_queue_cmd: queue size: 2 [0004.718] I> tegrabl_create_io_queue_cmd: queue size: 2 [0004.723] I> nvme device id 000a0000 [0004.726] I> nvme-0 params source = [0004.730] I> Found 11 partitions in NVME (instance 0) [0004.735] I> Look for boot partition [0004.738] I> Fallback: assuming 0th partition is boot partition [0004.750] I> Detect filesystem [0004.752] I> Loading kernel-bootctrl from partition [0004.752] I> Loading partition kernel-bootctrl at 0xa4b20000 from device(0xa) [0004.760] W> tegrabl_get_kernel_bootctrl: magic number(0x00000000) is invalid [0004.765] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data [0004.772] I> Loading extlinux.conf ... [0004.776] I> Loading extlinux.conf binary from rootfs ... [0004.781] I> rootfs path: /nvme/boot/extlinux/extlinux.conf [0004.787] I> Loading extlinux.conf sig file from rootfs ... [0004.792] I> rootfs path: /nvme/boot/extlinux/extlinux.conf.sig [0004.798] I> Validate extlinux.conf ... [0004.802] I> T19x: Authenticate extlinux.conf (bin_type: 54), max size 0x2000 [0004.809] I> Encryption fuse is not ON [0004.812] I> L4T boot options [0004.815] I> [1]: "primary kernel" [0004.818] I> Enter choice: [0007.822] I> Continuing with default option: 1 [0007.822] I> Loading kernel ... [0007.822] I> Loading kernel binary from rootfs ... [0007.823] I> rootfs path: /nvme/boot/Image [0007.997] I> Loading kernel sig file from rootfs ... [0007.998] I> rootfs path: /nvme/boot/Image.sig [0007.999] I> overload load_size to 34484232 (from 34484240) [0007.999] I> Validate kernel ... [0007.999] I> T19x: Authenticate kernel (bin_type: 37), max size 0x5000000 [0008.313] I> Encryption fuse is not ON [0008.345] I> Loading kernel-dtb ... [0008.345] I> No kernel-dtb binary path [0008.345] I> Continue to load from partition ... [0008.345] W> No valid slot number is found in scratch register [0008.346] W> Return default slot: _a [0008.346] I> A/B: bin_type (38) slot 0 [0008.346] I> Loading kernel-dtb from partition [0008.348] I> Loading partition kernel-dtb at 0x91000000 from device(0xa) [0008.358] I> Validate kernel-dtb ... [0008.358] I> T19x: Authenticate kernel-dtb (bin_type: 38), max size 0x400000 [0008.367] I> Encryption fuse is not ON [0008.369] I> Loading ramdisk from rootfs ... [0008.372] I> Loading ramdisk binary from rootfs ... [0008.377] I> rootfs path: /nvme/boot/initrd [0008.417] I> Loading ramdisk sig file from rootfs ... [0008.417] I> rootfs path: /nvme/boot/initrd.sig [0008.418] I> overload load_size to 7238358 (from 7238368) [0008.418] I> Validate ramdisk ... [0008.419] I> T19x: Authenticate ramdisk (bin_type: 54), max size 0x4000000 [0008.485] I> Encryption fuse is not ON [0008.498] I> PCIe (0) link is UP [0008.509] I> removable_boot_load_kernel_and_dtb: force NVME bdev to close !!! [0008.510] I> Kernel hdr @0xa4b20000 [0008.510] I> Kernel dtb @0x90000000 [0008.510] I> decompressor handler not found [0008.510] I> Copying kernel image (34484232 bytes) from 0xa4b20000 to 0x80080000 ... [0008.521] I> Done [0008.522] I> Updated bpmp info to DTB [0008.523] I> Ramdisk: Base: 0x92000000; Size: 0x6e72d6 [0008.523] I> Updated initrd info to DTB [0008.523] W> WARN: Fail to override "console=none" in commandline [0008.529] I> Active rootfs suffix: [0008.532] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display params [0008.540] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display params [0008.547] W> No valid slot number is found in scratch register [0008.553] W> Return default slot: _a [0008.556] I> Active slot suffix: [0008.559] I> add_boot_slot_suffix: slot_suffix = [0008.564] I> Linux Cmdline: console=ttyTCU0,115200 video=tegrafb earlycon=tegra_comb_uart,mmio32,0x0c168000 gpt rootfs.slot_suffix= tegra_fbmem=0x800000@0xa06aa000 lut_mem=0x2008@0xa06a5000 usbcore.old_scheme_first=1 tegraid=19.1.2.0.0 maxcpus=8 boot.slot_suffix= boot.ratchetvalues=0.4.2 vpr_resize sdhci_tegra.en_boot_part_access=1 [0008.593] I> Updated bootarg info to DTB [0008.597] W> MAC addr invalid! [0008.600] E> Failed to get WIFI MAC address [0008.604] W> MAC addr invalid! [0008.607] E> Failed to get Bluetooth MAC address [0008.611] I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:e5:92:60 [0008.618] W> "plugin-manager" doesn't exist, creating [0008.622] I> Adding /chosen/plugin-manager/cvm [0008.627] W> "chip-id" doesn't exist, creating [0008.631] I> Adding /chosen/plugin-manager/chip-id [0008.636] W> "configs" doesn't exist, creating [0008.640] I> Adding /chosen/plugin-manager/configs [0008.644] W> "ids" doesn't exist, creating [0008.648] I> Adding /chosen/plugin-manager/ids [0008.653] W> "odm-data" doesn't exist, creating [0008.657] I> Adding /chosen/plugin-manager/odm-data [0008.665] W> "memory" doesn't exist, creating [0008.666] I> [0] START: 0x80000000, END: 0xac000000 [0008.671] I> [1] START: 0xac004000, END: 0xf0ad0000 [0008.675] I> [2] START: 0xf0adc000, END: 0xf0ae0000 [0008.680] I> dram_block larger than 80000000 [0008.684] I> [3] START: 0x100000000, END: 0x880000000 [0008.689] I> added [base:0x80000000, size:0x2c000000] to /memory [0008.695] I> added [base:0xac200000, size:0x44800000] to /memory [0008.701] I> added [base:0x100000000, size:0x780000000] to /memory [0008.708] I> Updated memory info to DTB [0008.711] E> add_disp_param: failed to get display params for du=1 [0008.717] W> "reset" doesn't exist, creating [0008.722] I> Adding ecid(00000001645df740140000000c0100c0) to DT [0008.727] I> NVG: Logical CPU: 0; MPIDR: 0x80000000 [0008.731] I> NVG: Logical CPU: 1; MPIDR: 0x80000001 [0008.736] I> NVG: Logical CPU: 2; MPIDR: 0x80000100 [0008.741] I> NVG: Logical CPU: 3; MPIDR: 0x80000101 [0008.745] I> NVG: Logical CPU: 4; MPIDR: 0x80000200 [0008.750] I> NVG: Logical CPU: 5; MPIDR: 0x80000201 [0008.755] I> NVG: Logical CPU: 6; MPIDR: 0x80000300 [0008.760] I> NVG: Logical CPU: 7; MPIDR: 0x80000301 [0008.766] W> "misc-data" doesn't exist, creating [0008.769] I> Boot-device: eMMC [0008.772] I> Add boot-sdmmc to plugin-manager/misc-data [0008.777] I> Add storage-sdmmc to plugin-manager/misc-data [0008.782] W> Unknown storage device [0008.786] I> Add serial number:1421220028681 as DT property [0008.792] I> Plugin-manager override starting [0008.795] I> node /plugin-manager/fragement-tegra-wdt-en matches [0008.803] I> node /plugin-manager/fragement-soft-wdt matches [0008.810] I> node /plugin-manager/fragment-pcie-c5-rp matches [0008.814] I> node /plugin-manager/fragment-tegra-ufs-lane10 matches [0008.828] I> Disable plugin-manager status in FDT [0008.828] I> Plugin-manager override finished successfully [0008.829] I> tegrabl_load_kernel_and_dtb: Done [0008.851] I> Kernel EP: 0x80080000, DTB: 0x90000000 [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.253-tegra (buildbrain@mobile-u64-5403-d8000) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Sat Feb 19 08:58:27 PST 2022 [ 0.000000] Boot CPU: AArch64 Processor [4e0f0040] [ 0.000000] OF: fdt:memory scan node memory, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 2c000000 [ 0.000000] OF: fdt: - ac200000 , 44800000 [ 0.000000] OF: fdt: - 100000000 , 780000000 [ 0.000000] earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '') [ 0.000000] bootconsole [tegra_comb_uart0] enabled [ 0.000000] Found tegra_fbmem: 00800000@a06aa000 [ 0.000000] Found lut_mem: 00002008@a06a5000 ��WARNING: pll_d3 has no dyn ramp ��[ 5.648960] cgroup: cgroup2: unknown option "nsdelegate" [ 6.689527] iwlwifi 0003:01:00.0: Direct firmware load for iwlwifi-8265-26.ucode failed with error -2 [ 6.689766] iwlwifi 0003:01:00.0: Falling back to user helper [ 6.814613] using random self ethernet address [ 6.814761] using random host ethernet address [ 7.171419] random: crng init done [ 7.171544] random: 7 urandom warning(s) missed due to ratelimiting [ 7.333462] using random self ethernet address [ 7.333633] using random host ethernet address [ 7.676667] CPU4: shutdown [ 7.764936] CPU5: shutdown [ 7.836423] CPU6: shutdown [ 7.905297] CPU7: shutdown [ 8.098912] iwlwifi 0003:01:00.0: Direct firmware load for iwlwifi-8265-25.ucode failed with error -2 [ 8.098916] iwlwifi 0003:01:00.0: Falling back to user helper [ 8.297968] Bridge firewalling registered [ 8.443339] iwlwifi 0003:01:00.0: Direct firmware load for iwlwifi-8265-24.ucode failed with error -2 [ 8.443345] iwlwifi 0003:01:00.0: Falling back to user helper [ 8.455574] iwlwifi 0003:01:00.0: Direct firmware load for iwlwifi-8265-23.ucode failed with error -2 [ 8.455579] iwlwifi 0003:01:00.0: Falling back to user helper [ 8.624603] thermal thermal_zone8: failed to read out thermal zone (-5) Ubuntu 18.04.6 LTS octo-desktop ttyTCU0