/ { host1x { vi@15c10000 { num-channels = <8>; ports { #address-cells = <1>; #size-cells = <0>; port@4 { status = "okay"; reg = <4>; ar231_vi_in0: endpoint { status = "okay"; vc-id = <4>; port-index = <0>; bus-width = <4>; remote-endpoint = <&ar231_csi_out0>; }; }; port@5 { status = "okay"; reg = <5>; ar231_vi_in1: endpoint { status = "okay"; vc-id = <5>; port-index = <0>; bus-width = <4>; remote-endpoint = <&ar231_csi_out1>; }; }; port@6 { status = "okay"; reg = <6>; ar231_vi_in2: endpoint { status = "okay"; vc-id = <6>; port-index = <0>; bus-width = <4>; remote-endpoint = <&ar231_csi_out2>; }; }; port@7 { status = "okay"; reg = <7>; ar231_vi_in3: endpoint { status = "okay"; vc-id = <7>; port-index = <0>; bus-width = <4>; remote-endpoint = <&ar231_csi_out3>; }; }; }; }; nvcsi@15a00000 { num-channels = <4>; #address-cells = <1>; #size-cells = <0>; channel@4 { reg = <4>; status = "okay"; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; status = "okay"; ar231_csi_in0: endpoint@0 { status = "okay"; port-index = <0>; bus-width = <4>; remote-endpoint = <&ar231_ar231_out0>; }; }; port@1 { reg = <1>; status = "okay"; ar231_csi_out0: endpoint@1 { status = "okay"; remote-endpoint = <&ar231_vi_in0>; }; }; }; }; channel@5 { reg = <5>; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; status = "okay"; ar231_csi_in1: endpoint@2 { status = "okay"; port-index = <0>; bus-width = <4>; remote-endpoint = <&ar231_ar231_out1>; }; }; port@1 { reg = <1>; status = "okay"; ar231_csi_out1: endpoint@3 { status = "okay"; remote-endpoint = <&ar231_vi_in1>; }; }; }; }; channel@6 { reg = <6>; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; status = "okay"; ar231_csi_in2: endpoint@4 { status = "okay"; port-index = <0>; bus-width = <4>; remote-endpoint = <&ar231_ar231_out2>; }; }; port@1 { reg = <1>; status = "okay"; ar231_csi_out2: endpoint@5 { status = "okay"; remote-endpoint = <&ar231_vi_in2>; }; }; }; }; channel@7 { reg = <7>; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; status = "okay"; ar231_csi_in3: endpoint@6 { status = "okay"; port-index = <0>; bus-width = <4>; remote-endpoint = <&ar231_ar231_out3>; }; }; port@1 { reg = <1>; status = "okay"; ar231_csi_out3: endpoint@7 { status = "okay"; remote-endpoint = <&ar231_vi_in3>; }; }; }; }; }; };