[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.253-tegra (aos@aos-SSD-PUT250U3) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Mon Dec 19 19:37:24 JST 2022 [ 0.000000] Boot CPU: AArch64 Processor [4e0f0040] [ 0.000000] OF: fdt:memory scan node memory, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 2c000000 [ 0.000000] OF: fdt: - ac200000 , 44800000 [ 0.000000] OF: fdt: - 100000000 , 180000000 [ 0.000000] earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '') [ 0.000000] bootconsole [tegra_comb_uart0] enabled [ 0.000000] Found tegra_fbmem: 00800000@a06b1000 [ 0.000000] Found lut_mem: 00002008@a06ae000 [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node grid-of-semaphores, compatible id nvidia,gosmem [ 0.000000] cma: Reserved 64 MiB at 0x00000000c2000000 [ 0.000000] On node 0 totalpages: 2031101 [ 0.000000] DMA zone: 7160 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 458237 pages, LIFO batch:31 [ 0.000000] Normal zone: 24576 pages used for memmap [ 0.000000] Normal zone: 1572864 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 24 pages/cpu s57624 r8192 d32488 u98304 [ 0.000000] pcpu-alloc: s57624 r8192 d32488 u98304 alloc=24*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1999365 [ 0.000000] Kernel command line: console=ttyTCU0,115200 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 video=tegrafb earlycon=tegra_comb_uart,mmio32,0x0c168000 gpt rootfs.slot_suffix= tegra_fbmem=0x800000@0xa06b1000 lut_mem=0x2008@0xa06ae000 usbcore.old_scheme_first=1 tegraid=19.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.4.2 vpr_resize sdhci_tegra.en_boot_part_access=1 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 29984(91%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 7182536K/8124404K available (15358K kernel code, 2956K rwdata, 6636K rodata, 8640K init, 612K bss, 188204K reserved, 753664K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f80000 ( 15360 KB) [ 0.000000] .rodata : 0xffffff8008f80000 - 0xffffff8009600000 ( 6656 KB) [ 0.000000] .init : 0xffffff8009600000 - 0xffffff8009e70000 ( 8640 KB) [ 0.000000] .data : 0xffffff8009e70000 - 0xffffff800a153008 ( 2957 KB) [ 0.000000] .bss : 0xffffff800a153008 - 0xffffff800a1ec0b4 ( 613 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf08000000 ( 128 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc200000000 ( 8192 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.008855] Console: colour dummy device 80x25 [ 0.012441] console [tty0] enabled [ 0.015603] bootconsole [tegra_comb_uart0] disabled [ 0.020852] kmemleak: Kernel memory leak detector disabled [ 0.020886] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.020924] pid_max: default: 32768 minimum: 301 [ 0.022000] Security Framework initialized [ 0.022552] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.022579] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.024095] ftrace: allocating 47098 entries in 184 pages [ 0.423808] sched-energy: Sched-energy-costs installed from DT [ 0.423844] ASID allocator initialised with 65536 entries [ 0.458390] tegra-id: chipid=21917. [ 0.458415] tegra-id: opt_subrevision=1. [ 0.458451] Tegra Revision: A02p SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.458511] DTS File Name: ../arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-all-p3509-0000.dts [ 0.458557] DTB Build time: Dec 19 2022 19:12:38 [ 0.506409] CPU1: Booted secondary processor [4e0f0040] [ 0.538624] CPU2: Booted secondary processor [4e0f0040] [ 0.570724] CPU3: Booted secondary processor [4e0f0040] [ 0.602949] CPU4: Booted secondary processor [4e0f0040] [ 0.635166] CPU5: Booted secondary processor [4e0f0040] [ 0.635436] Brought up 6 CPUs [ 0.635572] SMP: Total of 6 processors activated. [ 0.635609] CPU features: detected feature: Privileged Access Never [ 0.635639] CPU features: detected feature: LSE atomic instructions [ 0.635689] CPU features: detected feature: User Access Override [ 0.635724] CPU features: detected feature: 32-bit EL0 Support [ 0.637225] CPU: All CPU(s) started at EL2 [ 0.637326] alternatives: patching kernel code [ 0.644549] devtmpfs: initialized [ 0.682234] Initilizing CustomIPI irq domain [ 0.682471] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.682516] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.695205] pinctrl core: initialized pinctrl subsystem [ 0.695475] OS set in device tree is not L4T. [ 0.695731] regulator-dummy: no parameters [ 0.695957] Initializing plugin-manager [ 0.696023] Plugin module not found [ 0.696089] Plugin-manager status disabled [ 0.697752] NET: Registered protocol family 16 [ 0.703407] pstore: using zlib compression [ 0.704117] console [pstore-1] enabled [ 0.704144] pstore: Registered ramoops as persistent store backend [ 0.704188] ramoops: attached 0x200000@0xf0800000, ecc: 0/0 [ 0.722237] cpuidle: using governor menu [ 0.723801] bpmp: waiting for handshake [ 0.723858] bpmp: handshake completed [ 0.723893] bpmp: synchronizing channels [ 0.723942] bpmp: channels synchronized [ 0.723968] bpmp: mail init ok [ 0.727491] t19x-arm-smmu 12000000.iommu: found 3 SMMUs and ISO SMMU id is 2 [ 0.727738] t19x-arm-smmu 12000000.iommu: probing hardware configuration... [ 0.727785] t19x-arm-smmu 12000000.iommu: SMMUv2 with: [ 0.727811] t19x-arm-smmu 12000000.iommu: stage 1 translation [ 0.727854] t19x-arm-smmu 12000000.iommu: stage 2 translation [ 0.727879] t19x-arm-smmu 12000000.iommu: nested translation [ 0.727925] t19x-arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80 [ 0.727960] t19x-arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)! [ 0.728012] t19x-arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 0.728039] t19x-arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA [ 0.728088] t19x-arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA [ 0.731524] vdso: 2 pages (1 code @ ffffff8008f87000, 1 data @ ffffff8009e74000) [ 0.731590] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.734903] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.736576] tegra_aon_clk_init: ok [ 0.736633] Registering BPMP clocks... [ 0.736776] tegra_bpmp_clk_init: clock init ok (400 clks) [ 0.737541] Serial: AMBA PL011 UART driver [ 0.737709] tegra_powergate_init: DONE [ 0.737881] DTS File Name: ../arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-all-p3509-0000.dts [ 0.737939] DTB Build time: Dec 19 2022 19:12:38 [ 0.740998] Tegra reboot handler registered. [ 0.749368] iommu: Adding device 14160000.pcie to group 0 [ 0.750140] iommu: Adding device 141a0000.pcie to group 1 [ 0.751595] iommu: Adding device 2490000.ether_qos to group 2 [ 0.752100] iommu: Adding device 3100000.serial to group 3 [ 0.752824] iommu: Adding device 3110000.serial to group 4 [ 0.753250] iommu: Adding device 3140000.serial to group 5 [ 0.753899] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.754217] tegra-pmc: get_secure_pmc_setting: done secure_pmc=0 [ 0.754267] tegra-pmc: ### PMC reset source: TEGRA_SOFTWARE_RESET [ 0.754294] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L1 [ 0.754321] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.754429] tegra-pmc: PMC Prod config success [ 0.754667] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.754739] tegra-pmc c360000.pmc: IO padctrl driver initialized [ 0.755390] iommu: Adding device 3460000.sdhci to group 6 [ 0.756140] iommu: Adding device 3210000.spi to group 7 [ 0.756594] iommu: Adding device 3230000.spi to group 8 [ 0.757071] iommu: Adding device 3270000.spi to group 9 [ 0.758379] iommu: Adding device 3160000.i2c to group 10 [ 0.759076] iommu: Adding device c240000.i2c to group 11 [ 0.759527] iommu: Adding device 3180000.i2c to group 12 [ 0.760013] iommu: Adding device 3190000.i2c to group 13 [ 0.760603] iommu: Adding device 31b0000.i2c to group 14 [ 0.761178] iommu: Adding device 31c0000.i2c to group 15 [ 0.761688] iommu: Adding device c250000.i2c to group 16 [ 0.762183] iommu: Adding device 31e0000.i2c to group 17 [ 0.762828] iommu: Adding device sound to group 18 [ 0.763503] iommu: Adding device 3510000.hda to group 19 [ 0.764102] iommu: Adding device bc00000.rtcpu to group 20 [ 0.766574] iommu: Adding device 13e10000.host1x to group 21 [ 0.767014] iommu: Adding device 13e10000.host1x:ctx0 to group 22 [ 0.767422] iommu: Adding device 13e10000.host1x:ctx1 to group 23 [ 0.767895] iommu: Adding device 13e10000.host1x:ctx2 to group 24 [ 0.768289] iommu: Adding device 13e10000.host1x:ctx3 to group 25 [ 0.768743] iommu: Adding device 13e10000.host1x:ctx4 to group 26 [ 0.769163] iommu: Adding device 13e10000.host1x:ctx5 to group 27 [ 0.769601] iommu: Adding device 13e10000.host1x:ctx6 to group 28 [ 0.770032] iommu: Adding device 13e10000.host1x:ctx7 to group 29 [ 0.770641] iommu: Adding device 15340000.vic to group 30 [ 0.771082] iommu: Adding device 15380000.nvjpg to group 31 [ 0.771413] iommu: Adding device 15500000.tsec to group 32 [ 0.771770] iommu: Adding device 15100000.tsecb to group 33 [ 0.772153] iommu: Adding device 15480000.nvdec to group 34 [ 0.772474] iommu: Adding device 15140000.nvdec1 to group 35 [ 0.772820] iommu: Adding device 154c0000.nvenc to group 36 [ 0.773197] iommu: Adding device 15a80000.nvenc1 to group 37 [ 0.773713] iommu: Adding device 15880000.nvdla0 to group 38 [ 0.774164] iommu: Adding device 158c0000.nvdla1 to group 39 [ 0.774937] iommu: Adding device 15200000.nvdisplay to group 40 [ 0.775161] platform 15200000.nvdisplay: IOVA linear map 0x00000000a06b1000(800000) [ 0.775214] platform 15200000.nvdisplay: IOVA linear map 0x00000000a06ae000(3000) [ 0.779293] platform 15200000.nvdisplay: IOVA linear map 0x00000000c6000000(2a000000) [ 0.779396] t19x-arm-smmu: Adding 15200000.nvdisplay to ISO SMMU client [ 0.780050] iommu: Adding device 15210000.nvdisplay to group 41 [ 0.780128] t19x-arm-smmu: Adding 15210000.nvdisplay to ISO SMMU client [ 0.781869] iommu: Adding device 15c10000.vi to group 42 [ 0.782071] t19x-arm-smmu: Adding 15c10000.vi to ISO SMMU client [ 0.782530] iommu: Adding device 14800000.isp to group 43 [ 0.783646] iommu: Adding device 16000000.pva0 to group 44 [ 0.784266] iommu: Adding device 16800000.pva1 to group 45 [ 0.784745] iommu: Adding device 15810000.se to group 46 [ 0.785169] iommu: Adding device 15820000.se to group 47 [ 0.785485] iommu: Adding device 15830000.se to group 48 [ 0.785831] iommu: Adding device 15840000.se to group 49 [ 0.786146] iommu: Adding device c1a0000.aon to group 50 [ 0.787867] iommu: Adding device d000000.bpmp to group 51 [ 0.788202] bpmp: ping status is 0 [ 0.788345] bpmp d000000.bpmp: firmware tag is e73a758761f0c6d24a1e69a2ac6b5035 [ 0.791556] bpmp d000000.bpmp: probe ok [ 0.793301] tegra-reset 0.bpmp_reset: registered 190 resets. [ 0.793846] iommu: Adding device smmu_test to group 52 [ 0.794972] mc: mapped MMIO address: 0xffffff800a5c0000 -> 0x2c10000 [ 0.795023] mc: mapped MMIO address: 0xffffff800a5e0000 -> 0x2c20000 [ 0.795070] mc: mapped MMIO address: 0xffffff800a7b0000 -> 0x2c30000 [ 0.795119] mc: mapped MMIO address: 0xffffff800a7d0000 -> 0x2c40000 [ 0.795208] mc: mapped MMIO address: 0xffffff800b010000 -> 0x2c50000 [ 0.795258] mc: mapped MMIO address: 0xffffff800b030000 -> 0x2b80000 [ 0.795304] mc: mapped MMIO address: 0xffffff800b050000 -> 0x2b90000 [ 0.795349] mc: mapped MMIO address: 0xffffff800b070000 -> 0x2ba0000 [ 0.795396] mc: mapped MMIO address: 0xffffff800b090000 -> 0x2bb0000 [ 0.795442] mc: mapped MMIO address: 0xffffff800b0b0000 -> 0x1700000 [ 0.795491] mc: mapped MMIO address: 0xffffff800b0d0000 -> 0x1710000 [ 0.795534] mc: mapped MMIO address: 0xffffff800b0f0000 -> 0x1720000 [ 0.795598] mc: mapped MMIO address: 0xffffff800b110000 -> 0x1730000 [ 0.795650] mc: mapped MMIO address: 0xffffff800b130000 -> 0x1740000 [ 0.795692] mc: mapped MMIO address: 0xffffff800b150000 -> 0x1750000 [ 0.795733] mc: mapped MMIO address: 0xffffff800b170000 -> 0x1760000 [ 0.795812] mc: mapped MMIO address: 0xffffff800b190000 -> 0x1770000 [ 0.795918] mc-err: mcerr ops are set to t19x [ 0.802122] iommu: Adding device 2600000.dma to group 53 [ 0.807199] gpio gpiochip0: gpio-line-names specifies 240 line names but there are 224 lines on the chip [ 0.808394] GPIO line 339 (wifi-enable) hogged as output/high [ 0.808470] GPIO line 412 (camera-control-output-low) hogged as output/low [ 0.808534] GPIO line 413 (camera-control-output-low) hogged as output/low [ 0.808866] gpiochip_setup_dev: registered GPIOs 288 to 511 on device: gpiochip0 (tegra-gpio) [ 0.816333] gpio gpiochip1: gpio-line-names specifies 21 line names but there are 40 lines on the chip [ 0.816469] GPIO line 253 (pex-refclk-sel-low) hogged as output/low [ 0.816534] GPIO line 266 (w-disable1) hogged as output/high [ 0.816595] GPIO line 264 (w-disable2) hogged as output/high [ 0.816675] GPIO line 265 (suspend-led-gpio) hogged as output/high [ 0.816970] gpiochip_setup_dev: registered GPIOs 248 to 287 on device: gpiochip1 (tegra-gpio-aon) [ 0.819370] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_83 = 0x10a [ 0.819410] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3 [ 0.819441] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256 [ 0.820275] iommu: Adding device 3550000.xudc to group 54 [ 0.821031] iommu: Adding device 3610000.xhci to group 55 [ 0.823143] arm64_ras arm64_ras: probed [ 0.823617] ras_fhi_enable: FHI 468 enabled on CPU0 [ 0.823686] ras_fhi_enable: FHI 469 enabled on CPU1 [ 0.823780] ras_fhi_enable: FHI 470 enabled on CPU2 [ 0.823870] ras_fhi_enable: FHI 471 enabled on CPU3 [ 0.823952] ras_fhi_enable: FHI 472 enabled on CPU4 [ 0.824042] ras_fhi_enable: FHI 473 enabled on CPU5 [ 0.824249] carmel_ras_enable: RAS enabled on cpu0 [ 0.824469] carmel_ras_enable: RAS enabled on cpu1 [ 0.824678] carmel_ras_enable: RAS enabled on cpu2 [ 0.824905] carmel_ras_enable: RAS enabled on cpu3 [ 0.825119] carmel_ras_enable: RAS enabled on cpu4 [ 0.825327] carmel_ras_enable: RAS enabled on cpu5 [ 0.825450] carmel_ras carmel_ras: probed [ 0.826735] tegra-cbb 2300000.cbb-noc: noc_secure_irq = 477, noc_nonsecure_irq = 476> [ 0.827286] tegra-cbb c600000.aon-noc: noc_secure_irq = 479, noc_nonsecure_irq = 478> [ 0.828294] tegra-cbb d600000.bpmp-noc: noc_secure_irq = 481, noc_nonsecure_irq = 480> [ 0.829239] tegra-cbb be00000.rce-noc: noc_secure_irq = 483, noc_nonsecure_irq = 482> [ 0.830147] tegra-cbb b600000.sce-noc: noc_secure_irq = 485, noc_nonsecure_irq = 484> [ 0.830596] tegra-cbb 14040000.cv-noc: defer probe as CV-NOC not probed yet [ 0.831856] vdd-ac-bat: 5000 mV [ 0.832282] vdd-sdmmc1-sw: 3300 mV [ 0.832656] vdd-1v8-sd: 1800 mV [ 0.832988] vdd-3v3-cvb: 3300 mV [ 0.833307] vdd-1v8-cvb: 1800 mV [ 0.833704] vdd-epb-1v0: 1000 mV [ 0.833940] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.834246] avdd-cam-2v8: 2800 mV [ 0.834599] vdd-fan: 5000 mV [ 0.834961] vdd-hdmi-5v0: 5000 mV [ 0.835323] vdd_sys_en: 1200 mV [ 0.864297] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.868861] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.869143] SCSI subsystem initialized [ 0.869422] libata version 3.00 loaded. [ 0.869667] usbcore: registered new interface driver usbfs [ 0.869740] usbcore: registered new interface driver hub [ 0.869847] usbcore: registered new device driver usb [ 0.880900] tegra-i2c 31e0000.i2c: could not find pctldev for node /host1x/dpaux@155F0000/pinmux@0, deferring probe [ 0.883875] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x2 [ 0.895487] vdd-1v0: at 1000 mV [ 0.903515] vdd-1v8-hs: at 1800 mV [ 0.911561] vdd-1v8-ls: at 1800 mV [ 0.919587] vdd-1v8-ao: at 1800 mV [ 0.927615] vddio-ddr-1v1: at 1100 mV [ 0.935410] vdd-rtc: at 800 mV [ 0.936477] spmic-ldo1: at 2375 mV [ 0.947422] vdd-ao-3v3: at 3300 mV [ 0.959492] vddio-emmc-3v3: at 3300 mV [ 0.960577] spmic-ldo4: at 1587 mV [ 0.971547] vdd-usb-3v3: at 3300 mV [ 0.983586] vddio-sdmmc1-3v3: at 3300 mV [ 0.991667] vdd-csi-1v2: at 1200 mV [ 0.992869] spmic-ldo8: at 1800 mV [ 0.997009] GPIO line 246 (gpio_default) hogged as output/high [ 0.997965] GPIO line 247 (gpio_default) hogged as output/high [ 0.998326] gpiochip_setup_dev: registered GPIOs 240 to 247 on device: gpiochip2 (max77620-gpio) [ 0.998703] max77620 4-003c: max77620 probe successful [ 0.999351] media: Linux media interface: v0.10 [ 0.999417] Linux video capture interface: v2.00 [ 1.001046] pps_core: LinuxPPS API ver. 1 registered [ 1.001079] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.001174] PTP clock support registered [ 1.001555] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 1.001888] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 1.001967] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 1.004693] trusty trusty: trusty version: Built: 08:57:16 Feb 19 2022 [ 1.004786] trusty trusty: selected api version: 3 (requested 3) [ 1.005870] Advanced Linux Sound Architecture Driver Initialized. [ 1.006402] Bluetooth: Core ver 2.22 [ 1.006493] NET: Registered protocol family 31 [ 1.006519] Bluetooth: HCI device and connection manager initialized [ 1.006553] Bluetooth: HCI socket layer initialized [ 1.006584] Bluetooth: L2CAP socket layer initialized [ 1.006669] Bluetooth: SCO socket layer initialized [ 1.009317] camchar: rtcpu character device driver loaded [ 1.009880] gpio tegra-gpio wake61 for gpio=201(Z:1) [ 1.010010] extcon-gpio-states external-connection:extcon@1: Cable state:1, cable id:1 [ 1.011494] clocksource: Switched to clocksource arch_sys_counter [ 1.058105] VFS: Disk quotas dquot_6.6.0 [ 1.058237] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.058619] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 1.060446] tegra-carveouts tegra-carveouts: assigned reserved memory node grid-of-semaphores [ 1.060568] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000c6000000, size=0x2a000000 [ 1.060896] cma: enabled page replacement for spfn=c6000, epfn=f0000 [ 1.060930] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 1.061000] nvmap: nvmap_select_cache_ops() nvmap cache ops set to scf [ 1.061037] nvmap_page_pool_init: Total RAM pages: 1984050 [ 1.061064] nvmap_page_pool_init: nvmap page pool size: 248006 pages (968 MB) [ 1.061200] nvmap_background_zero_thread: PP zeroing thread starting. [ 1.061565] misc nvmap: created heap vpr base 0x00000000c6000000 size (688128KiB) [ 1.064116] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 1.077374] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type CPU-therm [ 1.077652] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type GPU-therm [ 1.077910] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type AUX-therm [ 1.078119] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type AO-therm [ 1.078371] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 1.079633] la/ptsa driver initialized. [ 1.079970] NET: Registered protocol family 2 [ 1.080095] IP idents hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.084115] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 1.084531] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.085152] TCP: Hash tables configured (established 65536 bind 65536) [ 1.085224] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 1.085368] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 1.085848] NET: Registered protocol family 1 [ 1.086476] RPC: Registered named UNIX socket transport module. [ 1.086506] RPC: Registered udp transport module. [ 1.086530] RPC: Registered tcp transport module. [ 1.086553] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.086596] PCI: CLS 0 bytes, default 64 [ 1.086833] Trying to unpack rootfs image as initramfs... [ 1.313766] Freeing initrd memory: 7068K [ 1.335052] host1x 13e10000.host1x: initialized [ 1.336990] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.342096] audit: initializing netlink subsys (disabled) [ 1.342183] audit: type=2000 audit(0.948:1): initialized [ 1.342953] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.352411] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.353765] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.354438] 9p: Installing v9fs 9p2000 file system support [ 1.359602] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.359807] io scheduler noop registered [ 1.360093] io scheduler cfq registered (default) [ 1.363687] gic 2a41000.agic-controller: GIC IRQ controller registered [ 1.364834] random: fast init done [ 1.397605] iommu: Adding device 2993000.adsp to group 56 [ 1.502958] iommu: Adding device aconnect@2a41000:adsp_audio to group 57 [ 1.503881] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 1.516803] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.517313] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.517894] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.518416] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.518904] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.522521] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 1.522809] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 1.525868] tsec 15500000.tsec: initialized [ 1.527571] tsec 15100000.tsecb: initialized [ 1.531846] nvdec 15480000.nvdec: initialized [ 1.534662] nvdec 15140000.nvdec1: initialized [ 1.540484] falcon 15340000.vic: initialized [ 1.542269] falcon 15380000.nvjpg: initialized [ 1.544152] falcon 154c0000.nvenc: initialized [ 1.546173] falcon 15a80000.nvenc1: initialized [ 1.549212] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56) [ 1.551455] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57) [ 1.553162] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58) [ 1.554854] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59) [ 1.556546] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60) [ 1.558216] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61) [ 1.559998] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62) [ 1.561467] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63) [ 1.565143] t194-nvcsi 15a00000.nvcsi: initialized [ 1.570470] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 1.570934] scare-pigeon 14b00000.isp-thi: initialized [ 1.576508] pva 16000000.pva0: initialized [ 1.582344] pva 16800000.pva1: initialized [ 1.587448] nvdla 15880000.nvdla0: initialized [ 1.592248] nvdla 158c0000.nvdla1: initialized [ 1.593810] tegradccommon 15200000.dc_common: host1x channel mapped [ 1.593875] tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated [ 1.593977] tegradccommon 15200000.dc_common: dma mapping done [ 1.595195] tegradc 15200000.nvdisplay: disp0 connected to head0->/host1x/sor1 [ 1.595331] generic_infoframe_type: 0x87 [ 1.595447] tegradc 15200000.nvdisplay: DT parsed successfully [ 1.595563] tegradc 15200000.nvdisplay: Display dc.ffffff800bce0000 registered with id=0 [ 1.600899] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 1.600951] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 1.600990] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 1.601276] tegradc 15200000.nvdisplay: vblank syncpt # 8 for dc 0 [ 1.601310] tegradc 15200000.nvdisplay: vpulse3 syncpt # 9 for dc 0 [ 1.602369] tegradc 15200000.nvdisplay: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 1.605230] tegradc 15200000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board [ 1.605276] tegradc 15200000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 1.607087] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 32 channels [ 1.607943] tegra-fuse-burn 3820000.efuse:efuse-burn: shutdown limit check disabled [ 1.607997] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized [ 1.608559] kfuse 3830000.kfuse: initialized [ 1.612906] tegradc 15200000.nvdisplay: probed [ 1.613902] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.616819] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 47, base_baud = 0) is a TEGRA_UART [ 1.618131] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 48, base_baud = 0) is a TEGRA_UART [ 1.619423] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 49, base_baud = 0) is a TEGRA_UART [ 4.024281] console [ttyTCU0] enabled [ 4.024816] [drm] Initialized [ 4.024874] Console: switching to colour frame buffer device 240x67 [ 4.036458] brd: module loaded [ 4.040182] tegradc 15200000.nvdisplay: fb registered [ 4.043971] loop: module loaded [ 4.044037] tegra_profiler: version: 1.145, samples/io: 49/28 [ 4.044171] tegra_profiler: auth: init [ 4.045189] THERMAL EST: found 3 subdevs [ 4.045198] THERMAL EST num_resources: 0 [ 4.045206] [THERMAL EST subdev 0] [ 4.045215] [THERMAL EST subdev 1] [ 4.045223] [THERMAL EST subdev 2] [ 4.045233] THERMAL EST: Found 2 profiles, default profile is quiet [ 4.045580] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 4.045586] THERMAL EST: thz register success. [ 4.045789] THERMAL EST: end of probe, return err: 0 [ 4.046467] sd: No Scsi addr parsed to reserve index [ 4.046495] hisi_sas: driver version v1.6 [ 4.109499] gpio tegra-gpio wake63 for gpio=97(M:1) [ 4.114883] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 4.120300] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 4.131992] Parent Clock set for DC plld2 [ 4.133599] qspi_mtd spi6.0: s25fs256s SSG 8 0 1000 2000000 [ 4.135758] qspi_mtd spi6.0: s25fs256s (32768 Kbytes) [ 4.140896] qspi_mtd spi6.0: mtd .name = spi6.0, .size = 0x2000000 (32MiB) .erasesize = 0x00010000 (64KiB) .numeraseregions = 0 [ 4.152712] 1 ofpart partitions found on MTD device spi6.0 [ 4.157778] Creating 1 MTD partitions on "spi6.0": [ 4.162757] 0x000000000000-0x000002000000 : "Whole_flash0" [ 4.171633] libphy: Fixed MDIO Bus: probed [ 4.173325] tun: Universal TUN/TAP device driver, 1.6 [ 4.177831] tun: (C) 1999-2004 Max Krasnyansky [ 4.184840] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 4.190058] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 4.193626] tegradc 15200000.nvdisplay: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 4.194219] tegradc 15200000.nvdisplay: hdmi: get RGB quant from REG programmed by BL. [ 4.194231] tegradc 15200000.nvdisplay: hdmi: BL set VIC 0 [ 4.194263] tegradc 15200000.nvdisplay: hdmi: get YCC quant from REG programmed by BL. [ 4.195014] tegra-i2c 3190000.i2c: no acknowledge from address 0x50 [ 4.195813] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 4.195817] Extcon AUX1(HDMI) enable [ 4.196242] tegradc 15210000.nvdisplay: disp1 connected to head1->/host1x/sor [ 4.196272] generic_infoframe_type: 0x87 [ 4.196342] tegradc 15210000.nvdisplay: DT parsed successfully [ 4.196388] tegradc 15210000.nvdisplay: Display dc.ffffff800d150000 registered with id=1 [ 4.196633] tegradc 15210000.nvdisplay: vblank syncpt # 11 for dc 1 [ 4.196642] tegradc 15210000.nvdisplay: vpulse3 syncpt # 12 for dc 1 [ 4.199311] tegradc 15210000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board [ 4.199317] tegradc 15210000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 4.203077] tegra-i2c 31b0000.i2c: no acknowledge from address 0x50 [ 4.205399] tegradc 15210000.nvdisplay: probed [ 4.303026] tegra-i2c 3190000.i2c: no acknowledge from address 0x50 [ 4.307018] tegra-i2c 3190000.i2c: no acknowledge from address 0x50 [ 4.311013] tegra-i2c 3190000.i2c: no acknowledge from address 0x50 [ 4.314999] tegra-i2c 3190000.i2c: no acknowledge from address 0x50 [ 4.318990] tegra-i2c 3190000.i2c: no acknowledge from address 0x50 [ 4.322985] tegra-i2c 3190000.i2c: no acknowledge from address 0x50 [ 4.326970] tegra-i2c 3190000.i2c: no acknowledge from address 0x50 [ 4.330952] tegra-i2c 3190000.i2c: no acknowledge from address 0x50 [ 4.334942] tegra-i2c 3190000.i2c: no acknowledge from address 0x50 [ 4.338922] tegra-i2c 3190000.i2c: no acknowledge from address 0x50 [ 4.339460] tegradc 15200000.nvdisplay: hdmi: edid read failed [ 4.339536] tegradc 15200000.nvdisplay: hdmi: using fallback edid [ 4.381570] tegradc 15210000.nvdisplay: fb registered [ 4.381595] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 4.381598] igb: Copyright (c) 2007-2014 Intel Corporation. [ 4.381643] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 4.381645] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 4.381710] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k [ 4.381712] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 4.381757] tegradc 15200000.nvdisplay: blank - powerdown [ 4.381880] gpio tegra-gpio wake60 for gpio=96(M:0) [ 4.382111] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 4.382359] Parent Clock set for DC pll_d [ 4.385412] edid invalid [ 4.387393] tegradc 15210000.nvdisplay: hdmi: tmds rate:25200K prod-setting:prod_c_hdmi_0m_54m [ 4.388883] tegradc 15210000.nvdisplay: hdmi: get YCC quant from EDID. [ 4.392487] tegra-i2c 31b0000.i2c: no acknowledge from address 0x50 [ 4.395996] extcon-disp-state external-connection:disp-state: cable 46 state 1 [ 4.396002] Extcon AUX0(HDMI) enable [ 4.427436] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 4.427440] Extcon AUX1(HDMI) disable [ 4.465476] tegradc 15200000.nvdisplay: unblank [ 4.465723] Parent Clock set for DC plld2 [ 4.470360] tegradc 15200000.nvdisplay: hdmi: tmds rate:74250K prod-setting:prod_c_hdmi_54m_111m [ 4.471701] tegradc 15200000.nvdisplay: hdmi: get YCC quant from EDID. [ 4.475247] tegra-i2c 3190000.i2c: no acknowledge from address 0x50 [ 4.478839] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 4.478842] Extcon AUX1(HDMI) enable [ 4.488567] tegradc 15200000.nvdisplay: sync windows ret = 247 [ 4.503039] tegra-i2c 31b0000.i2c: no acknowledge from address 0x50 [ 4.506967] tegra-i2c 31b0000.i2c: no acknowledge from address 0x50 [ 4.511862] tegra-i2c 31b0000.i2c: no acknowledge from address 0x50 [ 4.524089] tegra-i2c 31b0000.i2c: no acknowledge from address 0x50 [ 4.535891] tegra-i2c 31b0000.i2c: no acknowledge from address 0x50 [ 4.548139] tegra-i2c 31b0000.i2c: no acknowledge from address 0x50 [ 4.561676] tegra-i2c 31b0000.i2c: no acknowledge from address 0x50 [ 4.591523] tegra-i2c 31b0000.i2c: no acknowledge from address 0x50 [ 4.622456] tegra-i2c 31b0000.i2c: no acknowledge from address 0x50 [ 4.634991] extcon-disp-state external-connection:disp-state: cable 51 state 1 [ 4.642126] Extcon HDMI: HPD enabled [ 4.645668] tegra-i2c 31b0000.i2c: no acknowledge from address 0x50 [ 4.651941] tegradc 15200000.nvdisplay: hdmi: plugged [ 4.652366] tegradc 15210000.nvdisplay: hdmi: edid read failed [ 4.652467] tegradc 15210000.nvdisplay: hdmi: using fallback edid [ 4.669539] tegradc 15210000.nvdisplay: blank - powerdown [ 4.671586] eqos 2490000.ether_qos: failed to read eqos_auto_cal_config_0_reg [ 4.672166] eqos 2490000.ether_qos: Setting local MAC: 48 b0 2d 67 6c 54 [ 4.672186] Using phyrst_lpmode = 1 from DT [ 4.672290] libphy: dwc_phy: probed [ 4.674792] PPP generic driver version 2.4.2 [ 4.675250] PPP BSD Compression module registered [ 4.675259] PPP Deflate Compression module registered [ 4.675278] PPP MPPE Compression module registered [ 4.675286] NET: Registered protocol family 24 [ 4.675350] usbcore: registered new interface driver r8152 [ 4.675390] usbcore: registered new interface driver asix [ 4.675456] usbcore: registered new interface driver ax88179_178a [ 4.675540] usbcore: registered new interface driver cdc_ether [ 4.675573] usbcore: registered new interface driver net1080 [ 4.675630] usbcore: registered new interface driver cdc_subset [ 4.675661] usbcore: registered new interface driver zaurus [ 4.675718] usbcore: registered new interface driver cdc_ncm [ 4.676193] VFIO - User Level meta-driver version: 0.3 [ 4.681704] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.681727] ehci-pci: EHCI PCI platform driver [ 4.681782] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.681791] ohci-pci: OHCI PCI platform driver [ 4.681822] ohci-platform: OHCI generic platform driver [ 4.687617] tegra-xusb 3610000.xhci: USB2 port 0 has OTG_CAP [ 4.689554] tegra-xusb 3610000.xhci: extcon 0: ffffffc1f4d57c00 id [ 4.690282] usbcore: registered new interface driver uas [ 4.690332] usbcore: registered new interface driver usb-storage [ 4.690403] usbcore: registered new interface driver usbserial [ 4.691568] tegra-xusb 3610000.xhci: Firmware timestamp: 2020-09-11 16:55:03 UTC, Version: 60.09 release [ 4.691612] tegra-xusb 3610000.xhci: xHCI Host Controller [ 4.691638] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 4.692331] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x00050810 [ 4.692385] tegra-xusb 3610000.xhci: irq 463, io mem 0x03610000 [ 4.692581] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.692587] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.692593] usb usb1: Product: xHCI Host Controller [ 4.692597] usb usb1: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 4.692602] usb usb1: SerialNumber: 3610000.xhci [ 4.693358] hub 1-0:1.0: USB hub found [ 4.693400] hub 1-0:1.0: 4 ports detected [ 4.694005] tegra-xudc-new 3550000.xudc: PMQOS CPU boost enabled [ 4.694092] tegra-xudc-new 3550000.xudc: device count: 1 [ 4.694261] tegra-xusb 3610000.xhci: xHCI Host Controller [ 4.694271] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 4.694279] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 4.694547] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 4.694578] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.694583] usb usb2: Product: xHCI Host Controller [ 4.694588] usb usb2: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 4.694593] usb usb2: SerialNumber: 3610000.xhci [ 4.695152] tegra-xudc-new 3550000.xudc: vbus state: 1 [ 4.695170] tegra-xudc-new 3550000.xudc: device mode on: 0 [ 4.695447] hub 2-0:1.0: USB hub found [ 4.695952] tegra-xudc-new 3550000.xudc: active: 0 => 1 [ 4.695962] tegra-xudc-new 3550000.xudc: Initialize boost_cpufreq work [ 4.696265] hub 2-0:1.0: 4 ports detected [ 4.696700] mousedev: PS/2 mouse device common for all mice [ 4.696794] usbcore: registered new interface driver xpad [ 4.698023] Wake76 for irq=199 [ 4.698027] Wake77 for irq=199 [ 4.698030] Wake78 for irq=199 [ 4.698033] Wake79 for irq=199 [ 4.698035] Wake80 for irq=199 [ 4.698038] Wake81 for irq=199 [ 4.698040] Wake82 for irq=199 [ 4.698082] tegra-xusb 3610000.xhci: Upgrade port 0 to USB3.0 [ 4.698089] tegra-xusb 3610000.xhci: Upgrade port 1 to USB3.0 [ 4.705822] extcon-disp-state external-connection:disp-state: cable 46 state 0 [ 4.705826] Extcon AUX0(HDMI) disable [ 4.726929] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 4.762110] tegradc 15210000.nvdisplay: unblank [ 4.762273] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 4.762530] Parent Clock set for DC pll_d [ 4.767480] tegradc 15210000.nvdisplay: hdmi: tmds rate:74250K prod-setting:prod_c_hdmi_54m_111m [ 4.768951] tegradc 15210000.nvdisplay: hdmi: get YCC quant from EDID. [ 4.772582] tegra-i2c 31b0000.i2c: no acknowledge from address 0x50 [ 4.776188] extcon-disp-state external-connection:disp-state: cable 46 state 1 [ 4.776192] Extcon AUX0(HDMI) enable [ 4.785834] tegradc 15210000.nvdisplay: sync windows ret = 248 [ 4.799907] usb usb2: usb_suspend_both: status 0 [ 4.829348] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 4.830915] Wake73 for irq=42 [ 4.832307] rtc rtc1: alarm rtc device [ 4.832322] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ 4.832367] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 4.832627] i2c /dev entries driver [ 4.835242] i2c i2c-2: Added multiplexed i2c bus 9 [ 4.835833] i2c i2c-2: Added multiplexed i2c bus 10 [ 4.835839] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 4.836475] imx219 9-0010: tegracam sensor driver:imx219_v2.0.6 [ 4.860020] tegra-i2c 3180000.i2c: no acknowledge from address 0x10 [ 4.860098] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 4.860204] imx219 9-0010: board setup failed [ 4.860283] imx219: probe of 9-0010 failed with error -121 [ 4.861524] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 4.868420] tegra-thermal-throttle bthrot_cdev: cpufreq policy is not ready defer [ 4.868829] FAN dev name: pwm-fan [ 4.868879] FAN:gpio request success. [ 4.868915] FAN: can't find tach_gpio [ 4.868947] pwm_fan_driver pwm-fan: Found 2 profiles, default profile is quiet [ 4.868973] pwm_fan_driver pwm-fan: cap state:4, cap pwm:255 [ 4.869224] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 4.869229] pwm_fan_driver pwm-fan: tach period: 1000 [ 4.869753] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 4.869759] pwm_fan_driver pwm-fan: index 1: pwm=130, rpm=1000, rru=2, rrd=2, state:2 [ 4.869764] pwm_fan_driver pwm-fan: index 2: pwm=160, rpm=2000, rru=1, rrd=1, state:2 [ 4.869769] pwm_fan_driver pwm-fan: index 3: pwm=200, rpm=3000, rru=1, rrd=1, state:2 [ 4.869774] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 4.869779] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 4.869784] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 4.869789] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 4.869795] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 4.869800] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 4.870520] tegra-oc-event d280000.soctherm-oc-event: OC driver initialized [ 4.871586] device-mapper: uevent: version 1.0.3 [ 4.872006] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 4.891436] tegra194_cpufreq_probe: platform driver Initialization: pass [ 4.897660] cpuidle: Initializing cpuidle driver [ 4.905150] sdhci: Secure Digital Host Controller Interface driver [ 4.905152] sdhci: Copyright(c) Pierre Ossman [ 4.905154] sdhci-pltfm: SDHCI platform and OF driver helper [ 4.906409] sdhci-tegra 3460000.sdhci: Client registration for eMC Successful [ 4.908132] CMDQ: cmdq_platfm_init successful [ 4.912649] tegra-se-nvhost 15810000.se: initialized [ 4.913650] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 4.914327] tegra-se-nvhost 15820000.se: initialized [ 4.915417] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 4.916037] tegra-se-nvhost 15830000.se: initialized [ 4.916709] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 4.917316] tegra-se-nvhost 15840000.se: initialized [ 4.918243] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 4.919430] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.919623] hidraw: raw HID events driver (C) Jiri Kosina [ 4.920880] usbcore: registered new interface driver usbhid [ 4.920882] usbhid: USB HID core driver [ 4.924631] tegra186-cam-rtcpu bc00000.rtcpu: deferring, 14800000.isp is not probed [ 4.925680] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.926158] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.926872] denver_knobs_init:MTS_VERSION:54811859 [ 4.927192] tegra19x_actmon d230000.actmon: in actmon_register()... [ 4.928028] tegra19x_actmon d230000.actmon: initialization Completed for the device mc_all [ 4.928543] t19x_cache tegra-cache: probed [ 4.930600] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 4.930607] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 4.931200] carmel-pmu-drv carmel-pmu: Registered Carmel PMU [ 4.931836] PLL_AON clock registered [ 4.933317] Clocks initialized successfully [ 4.934746] nvpmodel: initialized successfully [ 4.940180] trusty-virtio trusty:virtio: initializing [ 4.940406] trusty_ipc virtio0: vring0: va(pa) ffffffc1d26b0000(0) qsz 32 notifyid 1 [ 4.940415] trusty_ipc virtio0: vring1: va(pa) ffffffc1d26b2000(0) qsz 32 notifyid 2 [ 4.940546] trusty-virtio trusty:virtio: initializing done [ 4.940839] trusty_ipc virtio0: is online [ 4.941263] tegra-hda 3510000.hda: Override SDO lines to 4 [ 4.941674] usbcore: registered new interface driver snd-usb-audio [ 4.955564] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit with 64 bit addr [ 4.968046] input: tegra-hda-xnx HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input0 [ 4.968350] input: tegra-hda-xnx HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input1 [ 4.968564] input: tegra-hda-xnx HDMI/DP,pcm=8 as /devices/3510000.hda/sound/card0/input2 [ 4.968777] input: tegra-hda-xnx HDMI/DP,pcm=9 as /devices/3510000.hda/sound/card0/input3 [ 5.001554] mmc0: mmc_decode_ext_csd: CMDQ supported: depth: 31, cmdq_support: 1 [ 5.023771] mmc0: periodic cache flush enabled [ 5.023785] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 5.024397] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 5.024622] mmcblk0boot0: mmc0:0001 DG4016 partition 1 4.00 MiB [ 5.024812] mmcblk0boot1: mmc0:0001 DG4016 partition 2 4.00 MiB [ 5.024978] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB [ 5.029790] OPE platform probe [ 5.029894] OPE platform probe successful [ 5.030454] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 [ 5.030622] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 5.052095] usb 1-2: New USB device found, idVendor=0451, idProduct=8242 [ 5.052100] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=1 [ 5.052103] usb 1-2: SerialNumber: F3010851CA15 [ 5.052863] hub 1-2:1.0: USB hub found [ 5.052927] hub 1-2:1.0: 4 ports detected [ 5.106315] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 5.106464] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 5.106591] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 5.106704] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 5.106818] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 5.106932] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 5.107041] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 5.107159] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 5.107336] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 5.107449] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 5.107572] tegra-asoc: sound: ADMAIF11 <-> ADMAIF11 mapping ok [ 5.107665] tegra-asoc: sound: ADMAIF12 <-> ADMAIF12 mapping ok [ 5.107761] tegra-asoc: sound: ADMAIF13 <-> ADMAIF13 mapping ok [ 5.107855] tegra-asoc: sound: ADMAIF14 <-> ADMAIF14 mapping ok [ 5.107947] tegra-asoc: sound: ADMAIF15 <-> ADMAIF15 mapping ok [ 5.108036] tegra-asoc: sound: ADMAIF16 <-> ADMAIF16 mapping ok [ 5.108143] tegra-asoc: sound: ADMAIF17 <-> ADMAIF17 mapping ok [ 5.108244] tegra-asoc: sound: ADMAIF18 <-> ADMAIF18 mapping ok [ 5.108355] tegra-asoc: sound: ADMAIF19 <-> ADMAIF19 mapping ok [ 5.108481] tegra-asoc: sound: ADMAIF20 <-> ADMAIF20 mapping ok [ 5.137308] u32 classifier [ 5.137311] Actions configured [ 5.137400] Initializing XFRM netlink socket [ 5.138038] NET: Registered protocol family 10 [ 5.138844] NET: Registered protocol family 17 [ 5.138857] NET: Registered protocol family 15 [ 5.138919] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 5.139011] Bluetooth: RFCOMM socket layer initialized [ 5.139026] Bluetooth: RFCOMM ver 1.11 [ 5.139032] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 5.139037] Bluetooth: HIDP socket layer initialized [ 5.139053] 9pnet: Installing 9P2000 support [ 5.139088] Key type dns_resolver registered [ 5.146222] Registered cp15_barrier emulation handler [ 5.146241] Registered setend emulation handler [ 5.148013] registered taskstats version 1 [ 5.148439] tegra-pcie-dw 14160000.pcie: Setting init speed to max speed [ 5.150064] OF: PCI: host bridge /pcie@14160000 ranges: [ 5.150098] OF: PCI: IO 0x36100000..0x361fffff -> 0x36100000 [ 5.150115] OF: PCI: MEM 0x1740000000..0x17ffffffff -> 0x40000000 [ 5.150130] OF: PCI: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 5.164011] FAN rising trip_level:2 cur_temp:63600 trip_temps[3]:68000 [ 5.171765] usb 2-3: new SuperSpeed USB device number 2 using tegra-xusb [ 5.195997] usb 2-3: New USB device found, idVendor=0451, idProduct=8240 [ 5.196001] usb 2-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.197648] hub 2-3:1.0: USB hub found [ 5.198037] hub 2-3:1.0: 4 ports detected [ 5.315523] usb 1-3: new high-speed USB device number 3 using tegra-xusb [ 5.336105] usb 1-3: New USB device found, idVendor=0403, idProduct=6011 [ 5.336127] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.336129] usb 1-3: Product: Quad RS232-HS [ 5.336132] usb 1-3: Manufacturer: FTDI [ 5.355525] usb 2-3: usb_suspend_both: status 0 [ 5.355762] usb usb2: usb_suspend_both: status 0 [ 5.415540] usb 1-2.1: new high-speed USB device number 4 using tegra-xusb [ 5.441993] usb 1-2.1: New USB device found, idVendor=0b95, idProduct=1790 [ 5.441998] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 5.442000] usb 1-2.1: Product: AX88179 [ 5.442003] usb 1-2.1: Manufacturer: ASIX Elec. Corp. [ 5.442005] usb 1-2.1: SerialNumber: 00000000007C94 [ 5.663327] tegra-pcie-dw 14160000.pcie: link is down [ 5.663560] tegra-pcie-dw 14160000.pcie: PCI host bridge to bus 0004:00 [ 5.663567] pci_bus 0004:00: root bus resource [bus 00-ff] [ 5.663583] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 5.663591] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 5.663595] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 5.663627] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 5.663794] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 5.664141] iommu: Adding device 0004:00:00.0 to group 58 [ 5.664484] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 5.664505] pci 0004:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.664803] pcieport 0004:00:00.0: Signaling PME through PCIe PME interrupt [ 5.664809] pcie_pme 0004:00:00.0:pcie001: service driver pcie_pme loaded [ 5.664935] aer 0004:00:00.0:pcie002: service driver aer loaded [ 5.665091] pcie_pme 0004:00:00.0:pcie001: unloading service driver pcie_pme [ 5.665187] aer 0004:00:00.0:pcie002: unloading service driver aer [ 5.665319] pci_bus 0004:01: busn_res: [bus 01-ff] is released [ 5.665431] iommu: Removing device 0004:00:00.0 from group 58 [ 5.665521] pci_bus 0004:00: busn_res: [bus 00-ff] is released [ 5.667364] tegra-pcie-dw 14160000.pcie: PCIe link is not up...! [ 5.668164] tegra-pcie-dw 141a0000.pcie: Setting init speed to max speed [ 5.668392] tegra-pcie-dw 141a0000.pcie: Failed to get 3V slot regulator: -19 [ 5.668401] tegra-pcie-dw 141a0000.pcie: Failed to get 12V slot regulator: -19 [ 5.771852] OF: PCI: host bridge /pcie@141a0000 ranges: [ 5.771888] OF: PCI: IO 0x3a100000..0x3a1fffff -> 0x3a100000 [ 5.771905] OF: PCI: MEM 0x1f40000000..0x1fffffffff -> 0x40000000 [ 5.771920] OF: PCI: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 5.776154] ax88179_178a 1-2.1:1.0 eth1: register 'ax88179_178a' at usb-3610000.xhci-2.1, ASIX AX88179 USB 3.0 Gigabit Ethernet, 68:e1:dc:12:61:63 [ 5.859514] usb 1-2.2: new high-speed USB device number 5 using tegra-xusb [ 5.883510] tegra-pcie-dw 141a0000.pcie: link is up [ 5.883703] tegra-pcie-dw 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.883709] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.883726] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.883737] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.883741] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.883768] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.883887] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.884124] iommu: Adding device 0005:00:00.0 to group 58 [ 5.884543] pci 0005:01:00.0: [15b7:501a] type 00 class 0x010802 [ 5.884655] pci 0005:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 5.884800] pci 0005:01:00.0: reg 0x20: [mem 0x00000000-0x000000ff 64bit] [ 5.885562] iommu: Adding device 0005:01:00.0 to group 59 [ 5.894280] usb 1-2.2: New USB device found, idVendor=2c7c, idProduct=0125 [ 5.894284] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.894287] usb 1-2.2: Product: EG25-G [ 5.894290] usb 1-2.2: Manufacturer: Quectel [ 5.900421] pci 0005:00:00.0: BAR 14: assigned [mem 0x1f40000000-0x1f400fffff] [ 5.900429] pci 0005:01:00.0: BAR 0: assigned [mem 0x1f40000000-0x1f40003fff 64bit] [ 5.900486] pci 0005:01:00.0: BAR 4: assigned [mem 0x1f40004000-0x1f400040ff 64bit] [ 5.900542] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.900548] pci 0005:00:00.0: bridge window [mem 0x1f40000000-0x1f400fffff] [ 5.900563] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.900604] pci 0005:01:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512 [ 5.900860] pcieport 0005:00:00.0: Signaling PME through PCIe PME interrupt [ 5.900879] pci 0005:01:00.0: Signaling PME through PCIe PME interrupt [ 5.900884] pcie_pme 0005:00:00.0:pcie001: service driver pcie_pme loaded [ 5.900960] aer 0005:00:00.0:pcie002: service driver aer loaded [ 5.901440] nvme nvme0: pci function 0005:01:00.0 [ 5.901565] nvme 0005:01:00.0: enabling device (0000 -> 0002) [ 5.911789] tegra-cbb 14040000.cv-noc: noc_secure_irq = 89, noc_nonsecure_irq = 88> [ 5.916024] tegra194-isp5 14800000.isp: initialized [ 5.923092] tegra194-vi5 15c10000.vi: using default number of vi channels, 36 [ 5.926233] tegra194-vi5 15c10000.vi: initialized [ 5.930541] tegra194-vi5 15c10000.vi: subdev 15a00000.nvcsi--2 bound [ 5.930648] tegra194-vi5 15c10000.vi: subdev 15a00000.nvcsi--1 bound [ 5.930874] tegra-thermal-throttle bthrot_cdev: clk:cpu max:1907200000, min:115200000 steps:24 [ 5.934993] tegra-thermal-throttle bthrot_cdev: clk:gpu max:1109250000, min:114750000 steps:10 [ 5.935007] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced clk:0:cpu off:0 slope-adj:200 [ 5.935010] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced clk:1:gpu off:0 slope-adj:400 [ 5.935077] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced max_state:48 cutoff:0 [ 5.935111] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced clk:0:cpu off:0 slope-adj:400 [ 5.935115] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced clk:1:gpu off:0 slope-adj:400 [ 5.969381] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced max_state:40 cutoff:1 [ 5.969437] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced clk:0:cpu off:0 slope-adj:200 [ 5.969442] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced clk:1:gpu off:365500000 slope-adj:300 [ 5.969798] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced max_state:48 cutoff:0 [ 5.969838] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced clk:0:cpu off:38400000 slope-adj:10 [ 5.969842] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced clk:1:gpu off:25500000 slope-adj:10 [ 5.970193] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced max_state:2 cutoff:0 [ 5.970244] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced clk:0:cpu off:0 slope-adj:400 [ 5.970247] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced clk:1:gpu off:0 slope-adj:400 [ 5.970451] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced max_state:40 cutoff:1 [ 5.971340] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 5.975517] usb 1-2.3: new full-speed USB device number 6 using tegra-xusb [ 6.003008] usb 1-2.3: New USB device found, idVendor=0403, idProduct=6015 [ 6.003013] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 6.003016] usb 1-2.3: Product: FT231X USB UART [ 6.003018] usb 1-2.3: Manufacturer: FTDI [ 6.003021] usb 1-2.3: SerialNumber: D30DN537 [ 6.049131] tegra-ivc ivc-bc00000.rtcpu: region 0: iova=0xbfee0000-0xbfefffff size=131072 [ 6.049586] tegra-ivc ivc-bc00000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 6.049795] tegra-ivc ivc-bc00000.rtcpu:dbg@1: dbg: ver=0 grp=1 RX[1x384]=0x1900-0x1b00 TX[1x384]=0x1b00-0x1d00 [ 6.049972] tegra-ivc ivc-bc00000.rtcpu:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d00-0x3d80 TX[1x8192]=0x3d80-0x5e00 [ 6.050367] tegra-ivc ivc-bc00000.rtcpu:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e00-0xae80 TX[64x320]=0xae80-0xff00 [ 6.050425] tegra-ivc ivc-bc00000.rtcpu:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff00-0x17f80 TX[512x64]=0x17f80-0x20000 [ 6.050719] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (65) [ 6.050722] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 6.051859] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=5 sha1=1d7bd17f78528535d57449fa59ec355e37add4f8 [ 6.052296] Wake83 for irq=211 [ 6.052379] gpio tegra-gpio wake67 for gpio=48(G:0) [ 6.052453] gpio tegra-gpio-aon wake29 for gpio=36(EE:4) [ 6.052591] input: gpio-keys as /devices/gpio-keys/input/input4 [ 6.087909] tegra_rtc c2a0000.rtc: setting system clock to 2023-04-04 03:15:10 UTC (1680578110) [ 6.088377] mmcblk mmc0:0001: Card claimed for testing. [ 6.130336] bpmp: mounted debugfs mirror [ 6.136165] ALSA device list: [ 6.136170] #0: tegra-hda-xnx at 0x3518000 irq 64 [ 6.136172] #1: jetson-xaviernx-ape [ 6.717983] extcon-disp-state external-connection:disp-state: cable 40 state 1 [ 6.720356] Freeing unused kernel memory: 8640K [ 6.729834] Extcon HDMI: HPD enabled [ 6.729867] tegradc 15210000.nvdisplay: hdmi: plugged [ 6.773846] Root device found: mmcblk0p1 [ 6.776945] Found dev node: /dev/mmcblk0p1 [ 6.803623] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 6.807963] Rootfs mounted over mmcblk0p1 [ 6.839169] Switching from initrd to actual rootfs [ 6.972305] ip_tables: (C) 2000-2006 Netfilter Core Team [ 6.977176] cgroup: cgroup2: unknown option "nsdelegate" [ 6.989032] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 6.992365] systemd[1]: Detected architecture arm64. [ 7.009175] systemd[1]: Set hostname to . [ 7.091762] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 7.094433] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 7.240583] random: systemd: uninitialized urandom read (16 bytes read) [ 7.244913] systemd[1]: Created slice System Slice. [ 7.248460] random: systemd: uninitialized urandom read (16 bytes read) [ 7.250008] systemd[1]: Listening on Journal Audit Socket. [ 7.252869] random: systemd: uninitialized urandom read (16 bytes read) [ 7.255417] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 7.258342] systemd[1]: Reached target User and Group Name Lookups. [ 7.262167] systemd[1]: Created slice User and Session Slice. [ 7.336023] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 7.400445] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:291 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 7.703934] systemd-journald[2353]: Received request to flush runtime journal from PID 1 [ 8.350679] using random self ethernet address [ 8.350683] using random host ethernet address [ 8.701157] random: crng init done [ 8.702650] random: 7 urandom warning(s) missed due to ratelimiting [ 9.022467] Mass Storage Function, version: 2009/09/11 [ 9.022476] LUN: removable file: (no medium) [ 9.028159] using random self ethernet address [ 9.029746] using random host ethernet address [ 9.109978] rndis0: HOST MAC 1e:8a:a6:3b:06:7c [ 9.110704] rndis0: MAC 1e:8a:a6:3b:06:7d [ 9.111682] usb0: HOST MAC 1e:8a:a6:3b:06:7e [ 9.111892] usb0: MAC 1e:8a:a6:3b:06:7f [ 9.111927] tegra-xudc-new 3550000.xudc: ep 0 (type: 0, dir: out) enabled [ 9.120776] l4tbr0: port 1(rndis0) entered blocking state [ 9.120787] l4tbr0: port 1(rndis0) entered disabled state [ 9.121228] device rndis0 entered promiscuous mode [ 9.127439] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 9.132556] l4tbr0: port 2(usb0) entered blocking state [ 9.132566] l4tbr0: port 2(usb0) entered disabled state [ 9.132954] device usb0 entered promiscuous mode [ 9.139635] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 9.200794] tc358743: loading out-of-tree module taints kernel. [ 9.208101] tc358743 10-000f: chip found @0xf (i2c-2-mux (chan_id 1)) [ 9.208386] tc358743 10-000f: Device Tree Parameters: [ 9.208478] tc358743 10-000f: reset_gpio = 413 [ 9.208504] tc358743 10-000f: refclk_hz = 27000000 [ 9.216577] tc358743 endpoint->bus.mipi_csi2.flags 512 [ 9.216585] tc358743 endpoint->bus.mipi_csi2.clock_lane 0 [ 9.216589] tc358743 endpoint->bus.mipi_csi2.num_data_lanes 2 [ 9.216593] tc358743 endpoint->bus.mipi_csi2.data_lanes [1-2-0-0] [ 9.216596] tc358743 endpoint->nr_of_link_frequencies 1 [ 9.216599] tc358743 state->pdata.pll_prd=4 [ 9.216603] tc358743 state->pdata.pll_fbd=88 [ 9.216609] tc358743 10-000f: Subdev init done [ 9.216874] tc358743 10-000f: Chip ID val: 0 [ 9.216881] tc358743 10-000f: ctrl handler initied [ 9.216899] tc358743 10-000f: A bunch of new cutoms done [ 9.217527] tc358743 10-000f: Controls updated [ 9.218540] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9.219584] tc358743 10-000f: Work queue created [ 9.219590] tc358743 10-000f: About to call tegra_media_entity_init [ 9.219594] tc358743 10-000f: tegra_media_entity_init complete [ 9.219599] tc358743 10-000f: Set mbus_fmt_code in probe to: 8207 [ 9.219603] tc358743 10-000f: About to register subdev [ 9.219611] tegra194-vi5 15c10000.vi: subdev tc358743 10-000f bound [ 9.220063] tc358743 10-000f: tc358743_enum_mbus_code() [ 9.220070] tc358743 10-000f: Mbus code found succsefully (0: 4106) [ 9.220075] tc358743 10-000f: tc358743_enum_mbus_code() [ 9.220079] tc358743 10-000f: Mbus code found succsefully (1: 8207) [ 9.220082] tc358743 10-000f: tc358743_enum_mbus_code() [ 9.220292] tc358743 10-000f: Calling tc358743_get_fmt [ 9.220298] tc358743 10-000f: Here 6b, colorspace: 1 [ 9.220302] tc358743 10-000f: get fmt complete [ 9.220309] tc358743 10-000f: format width 0 [ 9.220312] tc358743 10-000f: format height 0 [ 9.220316] tc358743 10-000f: fmt_code: 8207 [ 9.220319] tc358743 10-000f: RGB888 code: 4106 [ 9.220323] tc358743 10-000f: UYVY8 code: 8207 [ 9.221159] tc358743 10-000f: Register subdev: 0 [ 9.221164] tc358743 10-000f: before tc358743_initial_setup [ 9.239074] tc358743 10-000f: tc358743_set_hdmi_hdcp: disable [ 9.245656] tc358743 10-000f: after tc358743_initial_setup [ 9.245666] tc358743 10-000f: tc358743_set_csi_color_space: YCbCr 422 16-bit [ 9.246817] tc358743 10-000f: before tc358743_s_dv_timings [ 9.246824] tc358743 10-000f: tc358743_s_dv_timings [ 9.246829] tc358743 10-000f: enable_stream: disable [ 9.247406] tc358743 10-000f: 793:enable_stream: end [ 9.247865] tc358743 10-000f: tc358743_set_pll: [ 9.247872] tc358743 10-000f: tc358743_set_csi: [ 9.253138] tc358743 10-000f: before tc358743_init_interrupts, irq: 295 [ 9.261029] tc358743 10-000f: after tc358743_init_interrupts, irq: 295 [ 9.261036] tc358743 10-000f: IQR request [ 9.263425] gpio tegra-gpio wake4 for gpio=105(N:1) [ 9.263623] tc358743 10-000f: err, 0 [ 9.265190] tc358743 10-000f: tc358743_enable_interrupts: cable connected = 1 [ 9.266311] tc358743 10-000f: tc358743 found @0xf (i2c-2-mux (chan_id 1)) [ 9.266319] tc358743 10-000f: tc358743_s_edid, pad 0, start block 0, blocks 2 [ 9.266323] tc358743 10-000f: tc358743_disable_edid: [ 9.273669] tc358743 10-000f: tc358743_enable_edid [ 9.273676] tc358743 10-000f: tc358743_enable_edid: [ 9.273684] tc358743 10-000f: tc358743_enable_interrupts: cable connected = 1 [ 9.274740] tc358743 10-000f: tc358743_enable_edid completed successfully [ 9.274747] tc358743 10-000f: tc358743_s_edid completed successfully [ 9.274752] tc358743 10-000f: Calling tc358743_g_edid [ 9.281422] tc358743 10-000f: EDID_RAM has 256 byte from: 0x8c00 to 0x8d00 [ 9.281426] tc358743 10-000f: tc358743_g_edid completed successfully [ 9.289310] tc358743 10-000f: tc358743_get_edid i2c_rd return 0 [ 9.289316] tc358743 10-000f: tc358743_get_edid done [ 9.289321] tc358743 10-000f: -----Chip status----- [ 9.296418] tc358743 10-000f: Chip ID:0x00 [ 9.297000] tc358743 10-000f: Chip revision:0x00 [ 9.297008] tc358743 10-000f: Reset: IR: 1, CEC: 1, CSI TX: 0, HDMI: 0 [ 9.297012] tc358743 10-000f: Sleep mode: off [ 9.297018] tc358743 10-000f: Cable detected (+5V power): no [ 9.297277] tc358743 10-000f: DDC lines enabled: yes [ 9.297490] tc358743 10-000f: Hotplug enabled: no [ 9.297721] tc358743 10-000f: CEC enabled: no [ 9.297726] tc358743 10-000f: -----Signal status----- [ 9.297731] tc358743 10-000f: TMDS signal detected: no [ 9.297734] tc358743 10-000f: Stable sync signal: no [ 9.297737] tc358743 10-000f: PHY PLL locked: no [ 9.297740] tc358743 10-000f: PHY DE detected: no [ 9.297945] tc358743 10-000f: tc358743_get_detected_timings: no valid signal [ 9.297950] tc358743 10-000f: No video detected [ 9.297956] tc358743 10-000f: Configured format: 1920x1080p60.0 (2200x1125) [ 9.297961] tc358743 10-000f: horizontal: fp = 88, +sync = 44, bp = 148 [ 9.297965] tc358743 10-000f: vertical: fp = 4, +sync = 5, bp = 36 [ 9.297969] tc358743 10-000f: pixelclock: 148500000 [ 9.297974] tc358743 10-000f: flags (0x12): CAN_REDUCE_FPS CE_VIDEO [ 9.297978] tc358743 10-000f: standards (0x3): CEA DMT [ 9.297981] tc358743 10-000f: -----CSI-TX status----- [ 9.297985] tc358743 10-000f: Lanes needed: 2 [ 9.298267] tc358743 10-000f: Lanes in use: 2 [ 9.298492] tc358743 10-000f: Waiting for particular sync signal: no [ 9.298720] tc358743 10-000f: Transmit mode: no [ 9.299187] tc358743 10-000f: Receive mode: no [ 9.299414] tc358743 10-000f: Stopped: no [ 9.299420] tc358743 10-000f: Color space: YCbCr 422 16-bit [ 9.300138] tc358743 10-000f: -----DVI-D status----- [ 9.300143] tc358743 10-000f: HDCP encrypted content: no [ 9.300150] tc358743 10-000f: Input color space: RGB full range [ 9.300352] tc358743 10-000f: Probe complete [ 9.312465] cpu-throttle-alert cooling device registered. [ 9.312807] gpu-throttle-alert cooling device registered. [ 9.314005] aux-throttle-alert cooling device registered. [ 9.356303] ras_fhi_disable: FHI 472 disabled [ 9.356997] CPU4: shutdown [ 9.358544] psci: CPU4 killed (polled 0 ms) [ 9.379629] tc358743 10-000f: tc358743_delayed_work_enable_hotplug: [ 9.432209] ras_fhi_disable: FHI 473 disabled [ 9.433960] CPU5: shutdown [ 9.435529] psci: CPU5 killed (polled 4 ms) [ 9.458571] nvgpu: 17000000.gv11b tpc_pg_mask_store:843 [INFO] no value change, same mask already set [ 9.536022] gpio tegra-gpio wake20 for gpio=52(G:4) [ 9.542408] net eth0: get_configure_l3v4_filter --> [ 9.542877] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9.683062] usbcore: registered new interface driver ftdi_sio [ 9.683180] usbserial: USB Serial support registered for FTDI USB Serial Device [ 9.683307] ftdi_sio 1-3:1.0: FTDI USB Serial Device converter detected [ 9.683448] usb 1-3: Detected FT4232H [ 9.701783] usb 1-3: FTDI USB Serial Device converter now attached to ttyUSB0 [ 9.701919] ftdi_sio 1-3:1.1: FTDI USB Serial Device converter detected [ 9.702012] usb 1-3: Detected FT4232H [ 9.703021] usb 1-3: FTDI USB Serial Device converter now attached to ttyUSB1 [ 9.703143] ftdi_sio 1-3:1.2: FTDI USB Serial Device converter detected [ 9.703242] usb 1-3: Detected FT4232H [ 9.703727] usb 1-3: FTDI USB Serial Device converter now attached to ttyUSB2 [ 9.703849] ftdi_sio 1-3:1.3: FTDI USB Serial Device converter detected [ 9.703935] usb 1-3: Detected FT4232H [ 9.704219] usb 1-3: FTDI USB Serial Device converter now attached to ttyUSB3 [ 9.704378] ftdi_sio 1-2.3:1.0: FTDI USB Serial Device converter detected [ 9.704537] usb 1-2.3: Detected FT-X [ 9.704862] usb 1-2.3: FTDI USB Serial Device converter now attached to ttyUSB4 [ 9.746928] zram: Added device: zram0 [ 9.752151] zram: Added device: zram1 [ 9.755127] zram: Added device: zram2 [ 9.757647] zram: Added device: zram3 [ 9.810396] zram0: detected capacity change from 0 to 1017843712 [ 9.901661] Adding 993984k swap on /dev/zram0. Priority:5 extents:1 across:993984k SS [ 9.905594] zram1: detected capacity change from 0 to 1017843712 [ 9.922186] Adding 993984k swap on /dev/zram1. Priority:5 extents:1 across:993984k SS [ 9.929276] zram2: detected capacity change from 0 to 1017843712 [ 9.963052] Adding 993984k swap on /dev/zram2. Priority:5 extents:1 across:993984k SS [ 9.968578] zram3: detected capacity change from 0 to 1017843712 [ 9.987407] Adding 993984k swap on /dev/zram3. Priority:5 extents:1 across:993984k SS [ 10.089297] usbcore: registered new interface driver option [ 10.089348] usbserial: USB Serial support registered for GSM modem (1-port) [ 10.089587] option 1-2.2:1.0: GSM modem (1-port) converter detected [ 10.092369] usb 1-2.2: GSM modem (1-port) converter now attached to ttyUSB5 [ 10.092465] option 1-2.2:1.1: GSM modem (1-port) converter detected [ 10.098695] usb 1-2.2: GSM modem (1-port) converter now attached to ttyUSB6 [ 10.098813] option 1-2.2:1.2: GSM modem (1-port) converter detected [ 10.102269] usb 1-2.2: GSM modem (1-port) converter now attached to ttyUSB7 [ 10.102390] option 1-2.2:1.3: GSM modem (1-port) converter detected [ 10.103339] usb 1-2.2: GSM modem (1-port) converter now attached to ttyUSB8 [ 10.242063] Bridge firewalling registered [ 10.262113] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 10.295770] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 10.602089] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 10.904042] Netfilter messages via NETLINK v0.30. [ 10.907028] ctnetlink v0.93: registering with nfnetlink. [ 10.995032] tegradc 15200000.nvdisplay: unblank [ 10.995060] tegradc 15210000.nvdisplay: unblank [ 11.147350] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 12.621512] fuse init (API version 7.26) [ 13.663983] ax88179_178a 1-2.1:1.0 eth1: ax88179 - Link status is: 1 [ 13.670604] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 14.833180] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 14.833199] Bluetooth: BNEP socket layer initialized [ 15.236006] FAN rising trip_level:2 cur_temp:64400 trip_temps[3]:68000 [ 15.811662] tegradc 15200000.nvdisplay: unblank [ 15.811677] tegradc 15210000.nvdisplay: unblank [ 15.853542] tegradc 15200000.nvdisplay: unblank [ 15.853557] tegradc 15210000.nvdisplay: unblank [ 16.819754] tegradc 15200000.nvdisplay: unblank [ 16.819769] tegradc 15210000.nvdisplay: unblank [ 36.195726] vdd-sdmmc1-sw: disabling [ 36.195735] vdd-1v8-sd: disabling [ 36.195774] vdd-1v8-cvb: disabling [ 36.195779] vdd-epb-1v0: disabling [ 36.195784] avdd-cam-2v8: disabling [ 36.195790] vdd_sys_en: disabling