�� [0002.374] W> RATCHET: MB1 binary ratchet value 4 is too large than ratchet level 2 from HW fuses. [0002.382] I> MB1 (prd-version: 1.5.1.3-t194-41334769-d2a21c57) [0002.388] I> Boot-mode: Platform RCM [0002.391] I> Chip revision : A02P [0002.394] I> Bootrom patch version : 15 (correctly patched) [0002.399] I> ATE fuse revision : 0x200 [0002.403] I> Ram repair fuse : 0x0 [0002.406] I> Ram Code : 0x0 [0002.409] I> rst_source : 0x0 [0002.411] I> rst_level : 0x0 [0002.415] I> USB configuration success [0004.490] I> mb2 image downloaded [0004.516] I> Recovery boot mode 0 [0004.520] I> Boot-device: QSPI [0004.524] I> UPHY full init done [0004.529] I> MB1 done [0004.533] W> Profiler not initialized [0004.537] I> Welcome to MB2(TBoot-BPMP) Applet (version: 00.00.2018.32-mobile-9af8dd5a) [0004.545] W> Profiler not initialized [0004.548] I> DMA Heap @ [0x40020000 - 0x40065800] [0004.553] I> Default Heap @ [0xd486400 - 0xd48a400] [0004.558] W> Profiler not initialized [0004.561] W> Profiler not initialized [0004.565] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0004.570] W> device prod register failed [0004.574] W> Profiler not initialized [0004.578] E> Error in command_complete 18000 int_status [0004.584] E> OCR failed, error = f0f0706 [0004.587] I> SDMMC is not present. [0004.591] I> QSPI Flash Size = 32 MB [0004.602] I> Qspi initialized successfully [0004.653] E> Link startup dme_set failed [0004.657] E> UFS initialization failed [0004.660] I> UFS is not present [0004.663] W> Profiler not initialized [0004.670] I> Found 47 partitions in QSPI_FLASH (instance 0) [0004.675] W> Profiler not initialized [0004.679] W> Profiler not initialized [0004.682] W> Profiler not initialized [0004.686] I> Entering 3p server [0004.689] I> USB configuration success [0005.663] I> Populate eeprom info [0005.667] I> Populate eeprom info for module cvm [0005.759] I> Rebooting : reboot-recovery [000��� [0013.529] W> RATCHET: MB1 binary ratchet value 4 is too large than ratchet level 2 from HW fuses. [0013.537] I> MB1 (prd-version: 1.5.1.3-t194-41334769-d2a21c57) [0013.542] I> Boot-mode: RCM [0013.545] I> Chip revision : A02P [0013.548] I> Bootrom patch version : 15 (correctly patched) [0013.553] I> ATE fuse revision : 0x200 [0013.557] I> Ram repair fuse : 0x0 [0013.560] I> Ram Code : 0x0 [0013.562] I> rst_source : 0xb [0013.565] I> rst_level : 0x1 [0013.569] I> USB configuration success [0015.585] I> bct_bootrom image downloaded [0015.593] W> MB1_PLATFORM_CONFIG: device prod data is empty in MB1 BCT. [0015.601] I> Temperature = 43500 [0015.604] W> Skipping boost for clk: BPMP_CPU_NIC [0015.608] W> Skipping boost for clk: BPMP_APB [0015.612] W> Skipping boost for clk: AXI_CBB [0015.616] W> Skipping boost for clk: AON_CPU_NIC [0015.621] W> Skipping boost for clk: CAN1 [0015.624] W> Skipping boost for clk: CAN2 [0015.629] I> Boot-device: QSPI [0015.632] I> Boot-device: QSPI [0015.634] I> Qspi flash params source = mb1bct [0015.638] I> bct_mb1 image downloaded [0015.648] I> ECC region[0]: Start:0x0, End:0x0 [0015.653] I> ECC region[1]: Start:0x0, End:0x0 [0015.657] I> ECC region[2]: Start:0x0, End:0x0 [0015.661] I> ECC region[3]: Start:0x0, End:0x0 [0015.665] I> ECC region[4]: Start:0x0, End:0x0 [0015.669] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0015.675] I> Non-ECC region[1]: Start:0x0, End:0x0 [0015.679] I> Non-ECC region[2]: Start:0x0, End:0x0 [0015.684] I> Non-ECC region[3]: Start:0x0, End:0x0 [0015.688] I> Non-ECC region[4]: Start:0x0, End:0x0 [0015.694] E> FAILED: Thermal config [0015.702] E> FAILED: MEMIO rail config [0015.712] I> bct_mem image downloaded [0017.021] I> blob image downloaded [0017.048] I> Recovery boot mode 0 [0017.115] I> MB1 done ����main enter SPE VERSION #: R01.00.14 Created: Sep 19 2018 @ 11:03:21 HW Function test Start Scheduler. in late init �� [0017.125] I> Welcome to MB2(TBoot-BPMP) Recovery (version: 00.00.2018.32-mobile-269daa9d) [0017.125] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0017.126] I> Default Heap @ [0xd486400 - 0xd48a400] [0017.127] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0017.133] W> device prod register failed [0017.138] I> parsing oem signed section of bpmp-fw header done [0017.146] I> bpmp-fw binary copied from blob [0017.147] I> oem authentication of bpmp-fw header done [0017.152] I> bpmp-fw: Authentication init Done [0017.156] I> parsing oem signed section of cpubl header done [0017.162] I> cpubl binary copied from blob [0017.166] I> bpmp-fw: Authentication Finalize Done [0017.170] I> oem authentication of cpubl header done [0017.175] I> cpubl: Authentication init Done [0017.179] I> parsing oem signed section of tos header done [0017.186] I> tos binary copied from blob [0017.189] I> Relocating BR-BCT [0017.191] I> cpubl: Authentication Finalize Done [0017.196] I> oem authentication of tos header done [0017.200] I> tos: Authentication init Done [0017.204] I> parsing oem signed section of bpmp-fw-dtb header done [0017.211] I> bpmp-fw-dtb binary copied from blob [0017.215] I> tos: Authentication Finalize Done [0017.221] I> oem authentication of bpmp-fw-dtb header done [0017.224] I> bpmp-fw-dtb: Authentication init Done [0017.229] I> parsing oem signed section of cpubl-dtb header done [0017.235] I> cpubl-dtb binary copied from blob [0017.239] I> bpmp-fw-dtb: Authentication Finalize Done [0017.316] I> oem authentication of cpubl-dtb header done [0017.316] I> cpubl-dtb: Authentication init Done [0017.317] I> parsing oem signed section of eks header done [0017.318] I> eks binary copied from blob [0017.318] I> cpubl-dtb: Authentication Finalize Done [0017.319] I> oem authentication of eks header done [0017.319] I> eks: Authentication init Done [0017.323] I> eks: Authentication Finalize Done [0017.327] I> EKB detected (length: 0x410) @ VA:0x526fb600 ��NOTICE: BL31: v1.3(release):41d46a9cf NOTICE: BL31: Built : 21:14:52, Jun 25 2020 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! hwkey-agent: 40: hwkey-agent is running!! hwkey-agent: 182: key_mgnt_processing ....... hwkey-agent: 157: Init hweky-agent services!! platform_bootstrap_epilog: trusty bootstrap complete �� welcome to lk calling constructors initializing heap creating bootstrap completion thread top of bootstrap2() initializing platform bpmp: platform_init tag is 57f8a77779f848bf2ecf21dabee5645f tag_show initialized dt initialized mail initialized chipid initialized fuse initialized sku initialized speedo initialized ec_get_ec_list: found 45 ecs ec initialized ec_mrq initialized vmon_populate_monitors: found 3 monitors vmon initialized adc initialized fmon_populate_monitors: found 73 monitors fmon initialized fmon_mrq initialized reset initialized nvhs initialized 391 clocks registered clk_mrq_init: mrq handler registered clk initialized nvlink initialized io_dpd initialized io_dpd initialized thermal initialized i2c5 controller initialized initialized i2c mrq handling i2c initialized regulator initialized avfs_clk_platform_init: bad clk id in clock@cluster1_avfs avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized pg_late initialized strap initialized tag initialized emc initialized clk_dt initialized avfs_ccplex_platform initialized tj_max: dt node not found tj_init initialized /uphy is not enabled status = disabled uphy_dt initialized uphy initialized safereg_init: period 80 ms ec_late initialized mrq initialized �� [0017.663] I> Welcome to TBoot-CPU Recovery ��WARNING: no registered clock for FMON_NAFLL_CLUSTER1 (id 281) fmon_post initialized ��[0017.663] I> Heap: [0xa4000000 ... 0xaa000000��clk_set_parent failed for clk can1, parent pll_ao) clk_set_parent failed for clk can2, parent pll_aon (-22) clk_set_parent failed for clk dmic5, parent pll_aon (-22) clk_set_parent failed for clk i2c2, parent pll_aon (-22) clk_set_parent failed for clk i2c8, parent pll_aon (-22) clk_set_parent failed for clk spi2, parent pll_aon (-22) clk_set_parent failed for clk pwm4, parent pll_aon (-22) clk_dt_late initialized machine_check initialized pm_post initialized dbells initialized avfs_clk_platform_post initialized dmce initialized cvc initialized ccplex_avfs_hw_init: nafll_cluster0: not monitored ccplex_avfs_hw_init: nafll_cluster2: not monitored ccplex_avfs_hw_init: nafll_cluster3: not monitored avfs_clk_mach_post initialized regulator_post initialized rm initialized sc7_diag initialized thermal_test initialized serial_late initialized clk_post initialized clk_dt_post initialized mc_reg initialized pg_post initialized dyn_modules initialized sku_debugfs initialized speedo_debugfs initialized adc_debugfs initialized Failed to register PTO counter for id 281 Failed to register PTO counter for id 281 Failed to register PTO counter for id 281 Failed to register PTO counter for id 281 clk_debugfs initialized emc_debugfs initialized dvs_debugfs initialized fmon_debugfs_init_one: no clock debugfs node to attach FMON_NAFLL_CLUSTER1 fmon_debugfs initialized vmon_debugfs initialized pg_debugfs initialized profile_fs initialized debugfs_cons initialized mail_fs initialized profile initialized cvc_debugfs initialized dmce_debugfs initialized ec_debugfs initialized rm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed rm_debugfs initialized soctherm_debug initialized gr_reader initialized mods initialized dt_fs initialized debugfs_mrq initialized debug_mrq initialized debug_safereg initialized initializing target calling apps_init() starting app shell entering main console loop ] �� [0017.849] I> gpio framework initialized [0017.859] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0017.864] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0017.868] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x46 [0017.877] E> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0017.885] E> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0017.890] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0017.896] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x44 [0017.904] E> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0017.912] E> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0017.917] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0017.926] I> fixed regulator driver initialized [0017.942] I> CPU: Nvidia Carmel [0017.942] I> CPU: MIDR: 0x4e0f0040, MPIDR: 0x80000000 [0017.943] I> chip revision : A02P [0017.943] I> Boot-device: QSPI [0017.943] I> Boot_device: QSPI_FLASH instance: 0 [0017.947] I> QSPI source rate = 204000 Khz [0017.950] I> Requested rate for QSPI clock = 34000 Khz [0017.955] I> BPMP-set rate for QSPI clk = 34000 Khz [0017.960] I> QSPI Flash Size = 32 MB [0017.968] I> Qspi initialized successfully [0017.968] I> qspi flash-0 params source = boot args [0018.361] E> Error in command_complete 18001 int_status [0018.362] E> OCR failed, error = f0f0706 [0018.362] E> Failed to open sdmmc-3, err = f0f0706 [0018.362] E> Failed to initialize device 1-3 [0018.363] E> Top caller module: SDMMC, error module: SDMMC, reason: 0x06, aux_info: 0x07 [0018.363] I> TBoot-CPU Recovery hang