[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.253-tegra (root@wilson-HP-Z440-Workstation) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #4 SMP PREEMPT Fri Oct 29 16:01:25 CST 2021 [ 0.000000] Boot CPU: AArch64 Processor [4e0f0040] [ 0.000000] OF: fdt:memory scan node memory, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 2c000000 [ 0.000000] OF: fdt: - ac200000 , 44800000 [ 0.000000] OF: fdt: - 100000000 , 180000000 [ 0.000000] earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '') [ 0.000000] bootconsole [tegra_comb_uart0] enabled [ 0.000000] Found tegra_fbmem: 00800000@a06b1000 [ 0.000000] Found lut_mem: 00002008@a06ae000 [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node grid-of-semaphores, compatible id nvidia,gosmem [ 0.000000] cma: Reserved 64 MiB at 0x00000000c2000000 [ 0.000000] On node 0 totalpages: 2031101 [ 0.000000] DMA zone: 7160 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 458237 pages, LIFO batch:31 [ 0.000000] Normal zone: 24576 pages used for memmap [ 0.000000] Normal zone: 1572864 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 24 pages/cpu s57624 r8192 d32488 u98304 [ 0.000000] pcpu-alloc: s57624 r8192 d32488 u98304 alloc=24*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1999365 [ 0.000000] Kernel command line: console=ttyTCU0,115200 video=tegrafb earlycon=tegra_comb_uart,mmio32,0x0c168000 gpt rootfs.slot_suffix= tegra_fbmem=0x800000@0xa06b1000 lut_mem=0x2008@0xa06ae000 usbcore.old_scheme_first=1 tegraid=19.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.4.2 vpr_resize sdhci_tegra.en_boot_part_access=1 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 29968(91%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 7182620K/8124404K available (15294K kernel code, 2902K rwdata, 6724K rodata, 8576K init, 610K bss, 188120K reserved, 753664K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f70000 ( 15296 KB) [ 0.000000] .rodata : 0xffffff8008f70000 - 0xffffff8009610000 ( 6784 KB) [ 0.000000] .init : 0xffffff8009610000 - 0xffffff8009e70000 ( 8576 KB) [ 0.000000] .data : 0xffffff8009e70000 - 0xffffff800a145808 ( 2903 KB) [ 0.000000] .bss : 0xffffff800a145808 - 0xffffff800a1de074 ( 611 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf08000000 ( 128 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc200000000 ( 8192 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000827] Console: colour dummy device 80x25 [ 0.000839] console [tty0] enabled [ 0.000847] bootconsole [tegra_comb_uart0] disabled [ 0.000863] kmemleak: Kernel memory leak detector disabled [ 0.000883] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.000899] pid_max: default: 32768 minimum: 301 [ 0.002002] Security Framework initialized [ 0.002586] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.002598] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.004176] ftrace: allocating 46990 entries in 184 pages [ 0.397902] sched-energy: Sched-energy-costs installed from DT [ 0.397923] ASID allocator initialised with 65536 entries [ 0.433689] tegra-id: chipid=21917. [ 0.433701] tegra-id: opt_subrevision=1. [ 0.433728] Tegra Revision: A02p SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.433742] DTS File Name: /mnt/hd2/sk_nx/32.6.1/Linux_for_Tegra/source/public/kernel_src/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-all-p3509-0000.dts [ 0.433752] DTB Build time: Oct 29 2021 16:00:49 [ 0.481797] CPU1: Booted secondary processor [4e0f0040] [ 0.513847] CPU2: Booted secondary processor [4e0f0040] [ 0.545933] CPU3: Booted secondary processor [4e0f0040] [ 0.578228] CPU4: Booted secondary processor [4e0f0040] [ 0.610362] CPU5: Booted secondary processor [4e0f0040] [ 0.610580] Brought up 6 CPUs [ 0.610589] SMP: Total of 6 processors activated. [ 0.610598] CPU features: detected feature: Privileged Access Never [ 0.610604] CPU features: detected feature: LSE atomic instructions [ 0.610611] CPU features: detected feature: User Access Override [ 0.610619] CPU features: detected feature: 32-bit EL0 Support [ 0.612087] CPU: All CPU(s) started at EL2 [ 0.612158] alternatives: patching kernel code [ 0.619224] devtmpfs: initialized [ 0.655146] Initilizing CustomIPI irq domain [ 0.655325] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.655343] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.681550] pinctrl core: initialized pinctrl subsystem [ 0.681812] OS set in device tree is not L4T. [ 0.682128] regulator-dummy: no parameters [ 0.682403] Initializing plugin-manager [ 0.682459] Plugin module not found [ 0.682503] Plugin-manager status disabled [ 0.683906] NET: Registered protocol family 16 [ 0.685101] pstore: using zlib compression [ 0.685126] console [pstore-1] enabled [ 0.685136] pstore: Registered ramoops as persistent store backend [ 0.685145] ramoops: attached 0x200000@0xf0800000, ecc: 0/0 [ 0.701182] cpuidle: using governor menu [ 0.702338] bpmp: waiting for handshake [ 0.702352] bpmp: handshake completed [ 0.702403] bpmp: synchronizing channels [ 0.702417] bpmp: channels synchronized [ 0.702424] bpmp: mail init ok [ 0.704726] t19x-arm-smmu 12000000.iommu: found 3 SMMUs and ISO SMMU id is 2 [ 0.704894] t19x-arm-smmu 12000000.iommu: probing hardware configuration... [ 0.704901] t19x-arm-smmu 12000000.iommu: SMMUv2 with: [ 0.704910] t19x-arm-smmu 12000000.iommu: stage 1 translation [ 0.704940] t19x-arm-smmu 12000000.iommu: stage 2 translation [ 0.704946] t19x-arm-smmu 12000000.iommu: nested translation [ 0.704955] t19x-arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80 [ 0.704964] t19x-arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)! [ 0.704972] t19x-arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 0.704979] t19x-arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA [ 0.704985] t19x-arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA [ 0.707871] vdso: 2 pages (1 code @ ffffff8008f77000, 1 data @ ffffff8009e74000) [ 0.707900] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.710614] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.711396] tegra_aon_clk_init: ok [ 0.711410] Registering BPMP clocks... [ 0.711537] tegra_bpmp_clk_init: clock init ok (400 clks) [ 0.712015] Serial: AMBA PL011 UART driver [ 0.712144] tegra_powergate_init: DONE [ 0.712161] DTS File Name: /mnt/hd2/sk_nx/32.6.1/Linux_for_Tegra/source/public/kernel_src/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-all-p3509-0000.dts [ 0.712172] DTB Build time: Oct 29 2021 16:00:49 [ 0.714727] Tegra reboot handler registered. [ 0.721604] iommu: Adding device 14160000.pcie to group 0 [ 0.722206] iommu: Adding device 141a0000.pcie to group 1 [ 0.723435] iommu: Adding device 2490000.ether_qos to group 2 [ 0.723856] iommu: Adding device 3100000.serial to group 3 [ 0.724325] iommu: Adding device 3110000.serial to group 4 [ 0.724703] iommu: Adding device 3140000.serial to group 5 [ 0.725274] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.725435] tegra-pmc: get_secure_pmc_setting: done secure_pmc=0 [ 0.725463] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET [ 0.725476] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L0 [ 0.725481] tegra-pmc: ### PMC reset status reg: 0x0 [ 0.725549] tegra-pmc: PMC Prod config success [ 0.725714] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.725726] tegra-pmc c360000.pmc: IO padctrl driver initialized [ 0.726033] iommu: Adding device 3460000.sdhci to group 6 [ 0.726633] iommu: Adding device 3440000.sdhci to group 7 [ 0.727198] iommu: Adding device 3210000.spi to group 8 [ 0.727605] iommu: Adding device 3230000.spi to group 9 [ 0.727960] iommu: Adding device 3270000.spi to group 10 [ 0.728872] iommu: Adding device 3160000.i2c to group 11 [ 0.729238] iommu: Adding device c240000.i2c to group 12 [ 0.729688] iommu: Adding device 3180000.i2c to group 13 [ 0.730046] iommu: Adding device 3190000.i2c to group 14 [ 0.730583] iommu: Adding device 31b0000.i2c to group 15 [ 0.731149] iommu: Adding device 31c0000.i2c to group 16 [ 0.731679] iommu: Adding device c250000.i2c to group 17 [ 0.732066] iommu: Adding device 31e0000.i2c to group 18 [ 0.732558] iommu: Adding device sound to group 19 [ 0.733090] iommu: Adding device 3510000.hda to group 20 [ 0.733665] iommu: Adding device bc00000.rtcpu to group 21 [ 0.735627] iommu: Adding device 13e10000.host1x to group 22 [ 0.736027] iommu: Adding device 13e10000.host1x:ctx0 to group 23 [ 0.736408] iommu: Adding device 13e10000.host1x:ctx1 to group 24 [ 0.736779] iommu: Adding device 13e10000.host1x:ctx2 to group 25 [ 0.737149] iommu: Adding device 13e10000.host1x:ctx3 to group 26 [ 0.737523] iommu: Adding device 13e10000.host1x:ctx4 to group 27 [ 0.737869] iommu: Adding device 13e10000.host1x:ctx5 to group 28 [ 0.738215] iommu: Adding device 13e10000.host1x:ctx6 to group 29 [ 0.738534] iommu: Adding device 13e10000.host1x:ctx7 to group 30 [ 0.739039] iommu: Adding device 15340000.vic to group 31 [ 0.739585] iommu: Adding device 15380000.nvjpg to group 32 [ 0.739891] iommu: Adding device 15500000.tsec to group 33 [ 0.740268] iommu: Adding device 15100000.tsecb to group 34 [ 0.740531] iommu: Adding device 15480000.nvdec to group 35 [ 0.740774] iommu: Adding device 15140000.nvdec1 to group 36 [ 0.741069] iommu: Adding device 154c0000.nvenc to group 37 [ 0.741373] iommu: Adding device 15a80000.nvenc1 to group 38 [ 0.741739] iommu: Adding device 15880000.nvdla0 to group 39 [ 0.742125] iommu: Adding device 158c0000.nvdla1 to group 40 [ 0.742612] iommu: Adding device 15200000.nvdisplay to group 41 [ 0.742776] platform 15200000.nvdisplay: IOVA linear map 0x00000000a06b1000(800000) [ 0.742786] platform 15200000.nvdisplay: IOVA linear map 0x00000000a06ae000(3000) [ 0.746779] platform 15200000.nvdisplay: IOVA linear map 0x00000000c6000000(2a000000) [ 0.746849] t19x-arm-smmu: Adding 15200000.nvdisplay to ISO SMMU client [ 0.747489] iommu: Adding device 15210000.nvdisplay to group 42 [ 0.747548] t19x-arm-smmu: Adding 15210000.nvdisplay to ISO SMMU client [ 0.749290] iommu: Adding device 15c10000.vi to group 43 [ 0.749459] t19x-arm-smmu: Adding 15c10000.vi to ISO SMMU client [ 0.749920] iommu: Adding device 14800000.isp to group 44 [ 0.750894] iommu: Adding device 16000000.pva0 to group 45 [ 0.751454] iommu: Adding device 16800000.pva1 to group 46 [ 0.751826] iommu: Adding device 15810000.se to group 47 [ 0.752230] iommu: Adding device 15820000.se to group 48 [ 0.752483] iommu: Adding device 15830000.se to group 49 [ 0.752721] iommu: Adding device 15840000.se to group 50 [ 0.752971] iommu: Adding device c1a0000.aon to group 51 [ 0.754515] iommu: Adding device d000000.bpmp to group 52 [ 0.754847] bpmp: ping status is 0 [ 0.754967] bpmp d000000.bpmp: firmware tag is e73a758761f0c6d24a1e69a2ac6b5035 [ 0.758035] bpmp d000000.bpmp: probe ok [ 0.759722] tegra-reset 0.bpmp_reset: registered 190 resets. [ 0.760142] iommu: Adding device smmu_test to group 53 [ 0.761148] mc: mapped MMIO address: 0xffffff800a5c0000 -> 0x2c10000 [ 0.761171] mc: mapped MMIO address: 0xffffff800a5e0000 -> 0x2c20000 [ 0.761192] mc: mapped MMIO address: 0xffffff800a7b0000 -> 0x2c30000 [ 0.761214] mc: mapped MMIO address: 0xffffff800a7d0000 -> 0x2c40000 [ 0.761236] mc: mapped MMIO address: 0xffffff800b010000 -> 0x2c50000 [ 0.761258] mc: mapped MMIO address: 0xffffff800b030000 -> 0x2b80000 [ 0.761279] mc: mapped MMIO address: 0xffffff800b050000 -> 0x2b90000 [ 0.761299] mc: mapped MMIO address: 0xffffff800b070000 -> 0x2ba0000 [ 0.761318] mc: mapped MMIO address: 0xffffff800b090000 -> 0x2bb0000 [ 0.761339] mc: mapped MMIO address: 0xffffff800b0b0000 -> 0x1700000 [ 0.761361] mc: mapped MMIO address: 0xffffff800b0d0000 -> 0x1710000 [ 0.761380] mc: mapped MMIO address: 0xffffff800b0f0000 -> 0x1720000 [ 0.761399] mc: mapped MMIO address: 0xffffff800b110000 -> 0x1730000 [ 0.761418] mc: mapped MMIO address: 0xffffff800b130000 -> 0x1740000 [ 0.761473] mc: mapped MMIO address: 0xffffff800b150000 -> 0x1750000 [ 0.761493] mc: mapped MMIO address: 0xffffff800b170000 -> 0x1760000 [ 0.761536] mc: mapped MMIO address: 0xffffff800b190000 -> 0x1770000 [ 0.761611] mc-err: mcerr ops are set to t19x [ 0.766563] iommu: Adding device 2600000.dma to group 54 [ 0.771353] gpio gpiochip0: gpio-line-names specifies 240 line names but there are 224 lines on the chip [ 0.772515] GPIO line 339 (wifi-enable) hogged as output/high [ 0.772555] GPIO line 436 (camera-control-output-high) hogged as output/high [ 0.772798] gpiochip_setup_dev: registered GPIOs 288 to 511 on device: gpiochip0 (tegra-gpio) [ 0.778552] gpio gpiochip1: gpio-line-names specifies 21 line names but there are 40 lines on the chip [ 0.778626] GPIO line 253 (pex-refclk-sel-low) hogged as output/low [ 0.778664] GPIO line 266 (w-disable1) hogged as output/high [ 0.778699] GPIO line 264 (w-disable2) hogged as output/high [ 0.778733] GPIO line 265 (suspend-led-gpio) hogged as output/high [ 0.778757] GPIO line 266 (camera-control-input) hogged as input [ 0.779022] gpiochip_setup_dev: registered GPIOs 248 to 287 on device: gpiochip1 (tegra-gpio-aon) [ 0.780879] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_83 = 0x10a [ 0.780891] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3 [ 0.780902] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256 [ 0.781578] iommu: Adding device 3550000.xudc to group 55 [ 0.782247] iommu: Adding device 3610000.xhci to group 56 [ 0.784168] arm64_ras arm64_ras: probed [ 0.784485] ras_fhi_enable: FHI 470 enabled on CPU0 [ 0.784536] ras_fhi_enable: FHI 471 enabled on CPU1 [ 0.784599] ras_fhi_enable: FHI 472 enabled on CPU2 [ 0.784658] ras_fhi_enable: FHI 473 enabled on CPU3 [ 0.784789] ras_fhi_enable: FHI 474 enabled on CPU4 [ 0.784855] ras_fhi_enable: FHI 475 enabled on CPU5 [ 0.785053] carmel_ras_enable: RAS enabled on cpu0 [ 0.785227] carmel_ras_enable: RAS enabled on cpu1 [ 0.785440] carmel_ras_enable: RAS enabled on cpu2 [ 0.785710] carmel_ras_enable: RAS enabled on cpu3 [ 0.785899] carmel_ras_enable: RAS enabled on cpu4 [ 0.786089] carmel_ras_enable: RAS enabled on cpu5 [ 0.786180] carmel_ras carmel_ras: probed [ 0.787203] tegra-cbb 2300000.cbb-noc: noc_secure_irq = 479, noc_nonsecure_irq = 478> [ 0.787668] tegra-cbb c600000.aon-noc: noc_secure_irq = 481, noc_nonsecure_irq = 480> [ 0.788514] tegra-cbb d600000.bpmp-noc: noc_secure_irq = 483, noc_nonsecure_irq = 482> [ 0.789255] tegra-cbb be00000.rce-noc: noc_secure_irq = 485, noc_nonsecure_irq = 484> [ 0.790082] tegra-cbb b600000.sce-noc: noc_secure_irq = 487, noc_nonsecure_irq = 486> [ 0.790619] tegra-cbb 14040000.cv-noc: defer probe as CV-NOC not probed yet [ 0.791737] vdd-ac-bat: 5000 mV [ 0.792065] vdd-sdmmc1-sw: 3300 mV [ 0.792314] vdd-1v8-sd: 1800 mV [ 0.792607] vdd-3v3-cvb: 3300 mV [ 0.792862] vdd-1v8-cvb: 1800 mV [ 0.793099] vdd-epb-1v0: 1000 mV [ 0.793242] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.793560] avdd-cam-2v8: 2800 mV [ 0.793820] vdd-fan: 5000 mV [ 0.794095] vdd-hdmi-5v0: 5000 mV [ 0.794336] vdd_sys_en: 1200 mV [ 0.822962] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.827025] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.827323] SCSI subsystem initialized [ 0.827534] libata version 3.00 loaded. [ 0.827710] usbcore: registered new interface driver usbfs [ 0.827772] usbcore: registered new interface driver hub [ 0.827807] usbcore: registered new device driver usb [ 0.839052] tegra-i2c 31e0000.i2c: could not find pctldev for node /host1x/dpaux@155F0000/pinmux@0, deferring probe [ 0.841729] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 0.850462] vdd-1v0: at 1000 mV [ 0.858493] vdd-1v8-hs: at 1800 mV [ 0.866492] vdd-1v8-ls: at 1800 mV [ 0.874519] vdd-1v8-ao: at 1800 mV [ 0.882587] vddio-ddr-1v1: at 1100 mV [ 0.890340] vdd-rtc: at 800 mV [ 0.891638] spmic-ldo1: at 2375 mV [ 0.902379] vdd-ao-3v3: at 3300 mV [ 0.914415] vddio-emmc-3v3: at 3300 mV [ 0.915683] spmic-ldo4: at 1587 mV [ 0.926450] vdd-usb-3v3: at 3300 mV [ 0.938485] vddio-sdmmc1-3v3: at 3300 mV [ 0.946541] vdd-csi-1v2: at 1200 mV [ 0.947963] spmic-ldo8: at 1800 mV [ 0.952777] GPIO line 246 (gpio_default) hogged as output/high [ 0.954168] GPIO line 247 (gpio_default) hogged as output/high [ 0.954455] gpiochip_setup_dev: registered GPIOs 240 to 247 on device: gpiochip2 (max77620-gpio) [ 0.954747] max77620 4-003c: max77620 probe successful [ 0.955180] media: Linux media interface: v0.10 [ 0.955226] Linux video capture interface: v2.00 [ 0.956459] pps_core: LinuxPPS API ver. 1 registered [ 0.956465] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.956553] PTP clock support registered [ 0.956902] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.957203] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.957246] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.959602] trusty trusty: trusty version: Built: 12:20:34 Jul 26 2021 [ 0.959684] trusty trusty: selected api version: 3 (requested 3) [ 0.960813] Advanced Linux Sound Architecture Driver Initialized. [ 0.961195] Bluetooth: Core ver 2.22 [ 0.961236] NET: Registered protocol family 31 [ 0.961242] Bluetooth: HCI device and connection manager initialized [ 0.961252] Bluetooth: HCI socket layer initialized [ 0.961260] Bluetooth: L2CAP socket layer initialized [ 0.961282] Bluetooth: SCO socket layer initialized [ 0.963951] camchar: rtcpu character device driver loaded [ 0.964438] gpio tegra-gpio wake61 for gpio=201(Z:1) [ 0.964541] extcon-gpio-states external-connection:extcon@1: Cable state:0, cable id:0 [ 0.965374] clocksource: Switched to clocksource arch_sys_counter [ 1.003767] VFS: Disk quotas dquot_6.6.0 [ 1.003854] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.004123] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 1.005490] tegra-carveouts tegra-carveouts: assigned reserved memory node grid-of-semaphores [ 1.005541] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000c6000000, size=0x2a000000 [ 1.005819] cma: enabled page replacement for spfn=c6000, epfn=f0000 [ 1.005828] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 1.005843] nvmap: nvmap_select_cache_ops() nvmap cache ops set to scf [ 1.005852] nvmap_page_pool_init: Total RAM pages: 1984071 [ 1.005859] nvmap_page_pool_init: nvmap page pool size: 248008 pages (968 MB) [ 1.006134] nvmap_background_zero_thread: PP zeroing thread starting. [ 1.006581] misc nvmap: created heap vpr base 0x00000000c6000000 size (688128KiB) [ 1.007579] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 1.018053] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type CPU-therm [ 1.018272] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type GPU-therm [ 1.018450] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type AUX-therm [ 1.018595] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type AO-therm [ 1.018740] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 1.019879] la/ptsa driver initialized. [ 1.020184] NET: Registered protocol family 2 [ 1.020981] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 1.021306] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.021931] TCP: Hash tables configured (established 65536 bind 65536) [ 1.021981] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 1.022099] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 1.022453] NET: Registered protocol family 1 [ 1.022983] RPC: Registered named UNIX socket transport module. [ 1.022989] RPC: Registered udp transport module. [ 1.022995] RPC: Registered tcp transport module. [ 1.023000] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.023011] PCI: CLS 0 bytes, default 64 [ 1.023261] Trying to unpack rootfs image as initramfs... [ 1.239354] Freeing initrd memory: 7068K [ 1.252722] random: fast init done [ 1.257125] host1x 13e10000.host1x: initialized [ 1.258713] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.263377] audit: initializing netlink subsys (disabled) [ 1.263417] audit: type=2000 audit(0.888:1): initialized [ 1.264075] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.271697] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.273019] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.273671] 9p: Installing v9fs 9p2000 file system support [ 1.278621] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.282780] io scheduler noop registered [ 1.283036] io scheduler cfq registered (default) [ 1.286608] gic 2a41000.agic-controller: GIC IRQ controller registered [ 1.290503] iommu: Adding device 2993000.adsp to group 57 [ 1.373456] iommu: Adding device aconnect@2a41000:adsp_audio to group 58 [ 1.374344] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 1.385576] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.386043] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.386599] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.386980] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.387379] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.390101] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 1.390296] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1875000, vi_iso_bw=1875000, max_bw=1875000 [ 1.392941] tsec 15500000.tsec: initialized [ 1.394755] tsec 15100000.tsecb: initialized [ 1.398121] nvdec 15480000.nvdec: initialized [ 1.400802] nvdec 15140000.nvdec1: initialized [ 1.406095] falcon 15340000.vic: initialized [ 1.408050] falcon 15380000.nvjpg: initialized [ 1.410131] falcon 154c0000.nvenc: initialized [ 1.412004] falcon 15a80000.nvenc1: initialized [ 1.415279] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56) [ 1.417066] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57) [ 1.418449] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58) [ 1.419891] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59) [ 1.421294] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60) [ 1.422823] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61) [ 1.424337] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62) [ 1.425750] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63) [ 1.429514] t194-nvcsi 15a00000.nvcsi: initialized [ 1.434674] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 1.435001] scare-pigeon 14b00000.isp-thi: initialized [ 1.440317] pva 16000000.pva0: initialized [ 1.446036] pva 16800000.pva1: initialized [ 1.450869] nvdla 15880000.nvdla0: initialized [ 1.455569] nvdla 158c0000.nvdla1: initialized [ 1.456690] tegradccommon 15200000.dc_common: host1x channel mapped [ 1.456705] tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated [ 1.456735] tegradccommon 15200000.dc_common: dma mapping done [ 1.457479] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=78 [ 1.457490] tegra_cec 3960000.tegra_cec: Unpowergate DISP: 0. [ 1.457740] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 1.457766] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 1.458001] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 1.458012] tegra_cec 3960000.tegra_cec: probed [ 1.458438] tegradc 15200000.nvdisplay: disp0 connected to head0->/host1x/sor1 [ 1.458468] generic_infoframe_type: 0x87 [ 1.458530] tegradc 15200000.nvdisplay: DT parsed successfully [ 1.458561] tegradc 15200000.nvdisplay: Display dc.ffffff800bce0000 registered with id=0 [ 1.463328] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 1.463336] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 1.463343] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 1.463670] tegradc 15200000.nvdisplay: vblank syncpt # 8 for dc 0 [ 1.463682] tegradc 15200000.nvdisplay: vpulse3 syncpt # 9 for dc 0 [ 1.464511] tegradc 15200000.nvdisplay: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 1.466899] tegradc 15200000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board [ 1.466910] tegradc 15200000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 1.470468] tegradc 15200000.nvdisplay: probed [ 1.470636] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 32 channels [ 1.471613] tegra-fuse-burn 3820000.efuse:efuse-burn: shutdown limit check disabled [ 1.471648] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized [ 1.472032] kfuse 3830000.kfuse: initialized [ 1.482663] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.484771] [sk]sc16 check point 1 [ 1.485719] tegra-i2c c240000.i2c: no acknowledge from address 0x48 [ 1.488496] [sk]sc16 check point 7-325, -22 [ 1.489859] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 47, base_baud = 0) is a TEGRA_UART [ 1.491273] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 48, base_baud = 0) is a TEGRA_UART [ 1.492228] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 49, base_baud = 0) is a TEGRA_UART [ 1.493740] console [ttyTCU0] enabled [ 1.494109] [drm] Initialized [ 1.504372] brd: module loaded [ 1.509105] loop: module loaded [ 1.509163] tegra_profiler: version: 1.145, samples/io: 49/28 [ 1.509268] tegra_profiler: auth: init [ 1.509916] THERMAL EST: found 3 subdevs [ 1.509923] THERMAL EST num_resources: 0 [ 1.509931] [THERMAL EST subdev 0] [ 1.509938] [THERMAL EST subdev 1] [ 1.509944] [THERMAL EST subdev 2] [ 1.509955] THERMAL EST: Found 2 profiles, default profile is quiet [ 1.510211] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 1.510217] THERMAL EST: thz register success. [ 1.510390] THERMAL EST: end of probe, return err: 0 [ 1.510991] sd: No Scsi addr parsed to reserve index [ 1.511019] hisi_sas: driver version v1.6 [ 1.515648] Console: switching to colour frame buffer device 240x67 [ 1.515774] tegradc 15200000.nvdisplay: fb registered [ 1.516045] gpio tegra-gpio wake63 for gpio=97(M:1) [ 1.516585] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 1.516691] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 1.522077] Parent Clock set for DC plld2 [ 1.525663] qspi_mtd spi6.0: s25fs256s SSG 8 0 1000 2000000 [ 1.525672] qspi_mtd spi6.0: s25fs256s (32768 Kbytes) [ 1.525684] qspi_mtd spi6.0: mtd .name = spi6.0, .size = 0x2000000 (32MiB) .erasesize = 0x00010000 (64KiB) .numeraseregions = 0 [ 1.525943] 1 ofpart partitions found on MTD device spi6.0 [ 1.525949] Creating 1 MTD partitions on "spi6.0": [ 1.525967] 0x000000000000-0x000002000000 : "Whole_flash0" [ 1.529064] libphy: Fixed MDIO Bus: probed [ 1.529598] tun: Universal TUN/TAP device driver, 1.6 [ 1.529605] tun: (C) 1999-2004 Max Krasnyansky [ 1.530938] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.530944] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.531030] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.531035] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.531119] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 1.531124] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.531204] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k [ 1.531209] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 1.582869] tegradc 15200000.nvdisplay: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 1.583574] tegradc 15200000.nvdisplay: hdmi: get RGB quant from REG programmed by BL. [ 1.583592] tegradc 15200000.nvdisplay: hdmi: get YCC quant from REG programmed by BL. [ 1.609256] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 1.609264] Extcon AUX1(HDMI) enable [ 1.609695] tegradc 15210000.nvdisplay: disp1 connected to head1->/host1x/sor [ 1.609728] tegradc 15210000.nvdisplay: parse_dp_settings: No dp-lt-settings node [ 1.609800] tegradc 15210000.nvdisplay: DT parsed successfully [ 1.609881] tegradc 15210000.nvdisplay: Display dc.ffffff800d1e0000 registered with id=1 [ 1.610125] tegradc 15210000.nvdisplay: vblank syncpt # 11 for dc 1 [ 1.610135] tegradc 15210000.nvdisplay: vpulse3 syncpt # 12 for dc 1 [ 1.618411] tegradc 15210000.nvdisplay: probed [ 1.618712] tegradc 15210000.nvdisplay: fb registered [ 1.622185] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 1.622200] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 1.622212] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 1.622223] tegradc 15210000.nvdisplay: blank - powerdown [ 1.622237] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 1.622242] Extcon DP: HPD disabled [ 1.622247] hpd: hpd_switch 0 [ 1.622253] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 1.622265] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 1.622274] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 1.740536] tegradc 15200000.nvdisplay: blank - powerdown [ 1.776525] eqos 2490000.ether_qos: failed to read eqos_auto_cal_config_0_reg [ 1.777101] eqos 2490000.ether_qos: Setting local MAC: 48 b0 2d 50 c3 1b [ 1.777121] Using phyrst_lpmode = 1 from DT [ 1.777209] libphy: dwc_phy: probed [ 1.779437] PPP generic driver version 2.4.2 [ 1.779723] PPP BSD Compression module registered [ 1.779728] PPP Deflate Compression module registered [ 1.779744] PPP MPPE Compression module registered [ 1.779749] NET: Registered protocol family 24 [ 1.779803] usbcore: registered new interface driver r8152 [ 1.779836] usbcore: registered new interface driver asix [ 1.779862] usbcore: registered new interface driver ax88179_178a [ 1.779883] usbcore: registered new interface driver cdc_ether [ 1.779904] usbcore: registered new interface driver net1080 [ 1.779926] usbcore: registered new interface driver cdc_subset [ 1.779950] usbcore: registered new interface driver zaurus [ 1.779986] usbcore: registered new interface driver cdc_ncm [ 1.780142] VFIO - User Level meta-driver version: 0.3 [ 1.781210] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.781226] ehci-pci: EHCI PCI platform driver [ 1.781255] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.781262] ohci-pci: OHCI PCI platform driver [ 1.781292] ohci-platform: OHCI generic platform driver [ 1.783270] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 1.783274] Extcon AUX1(HDMI) disable [ 1.785940] tegra-xusb 3610000.xhci: USB2 port 0 has OTG_CAP [ 1.787837] tegra-xusb 3610000.xhci: extcon 0: ffffffc1f5312000 id [ 1.788403] usbcore: registered new interface driver uas [ 1.788444] usbcore: registered new interface driver usb-storage [ 1.788501] usbcore: registered new interface driver usbserial [ 1.789416] tegra-xusb 3610000.xhci: Firmware timestamp: 2020-09-11 16:55:03 UTC, Version: 60.09 release [ 1.789471] tegra-xusb 3610000.xhci: xHCI Host Controller [ 1.789489] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 1.790217] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x00050810 [ 1.790293] tegra-xusb 3610000.xhci: irq 465, io mem 0x03610000 [ 1.790481] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.790487] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.790492] usb usb1: Product: xHCI Host Controller [ 1.790497] usb usb1: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 1.790508] usb usb1: SerialNumber: 3610000.xhci [ 1.791339] hub 1-0:1.0: USB hub found [ 1.791384] hub 1-0:1.0: 4 ports detected [ 1.791787] tegra-xusb 3610000.xhci: xHCI Host Controller [ 1.791798] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 1.791805] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 1.792078] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.792084] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.792089] usb usb2: Product: xHCI Host Controller [ 1.792116] usb usb2: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 1.792121] usb usb2: SerialNumber: 3610000.xhci [ 1.792846] hub 2-0:1.0: USB hub found [ 1.792885] hub 2-0:1.0: 4 ports detected [ 1.794237] tegra-xudc-new 3550000.xudc: PMQOS CPU boost enabled [ 1.794322] tegra-xudc-new 3550000.xudc: device count: 1 [ 1.795066] tegra-xudc-new 3550000.xudc: vbus state: 0 [ 1.795073] tegra-xudc-new 3550000.xudc: Initialize boost_cpufreq work [ 1.795095] tegra-xudc-new 3550000.xudc: entering ELPG [ 1.795309] tegra-xudc-new 3550000.xudc: entering ELPG done [ 1.795820] mousedev: PS/2 mouse device common for all mice [ 1.795916] usbcore: registered new interface driver xpad [ 1.800300] Wake76 for irq=199 [ 1.800304] Wake77 for irq=199 [ 1.800306] Wake78 for irq=199 [ 1.800309] Wake79 for irq=199 [ 1.800311] Wake80 for irq=199 [ 1.800314] Wake81 for irq=199 [ 1.800317] Wake82 for irq=199 [ 1.800366] tegra-xusb 3610000.xhci: Upgrade port 0 to USB3.0 [ 1.800373] tegra-xusb 3610000.xhci: Upgrade port 1 to USB3.0 [ 1.808706] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 1.809922] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 1.830654] tegradc 15200000.nvdisplay: unblank [ 1.832460] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 1.832769] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 1.843697] Parent Clock set for DC plld2 [ 1.848214] tegradc 15200000.nvdisplay: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 1.849765] tegradc 15200000.nvdisplay: hdmi: get YCC quant from EDID. [ 1.884506] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 1.884510] Extcon AUX1(HDMI) enable [ 1.893756] usb usb1: usb_suspend_both: status 0 [ 1.893874] usb usb2: usb_suspend_both: status 0 [ 1.899989] tegradc 15200000.nvdisplay: sync windows ret = 246 [ 1.906015] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 1.907491] Wake73 for irq=42 [ 1.908722] rtc rtc1: alarm rtc device [ 1.908735] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ 1.908794] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 1.908921] i2c /dev entries driver [ 1.910782] tc358840 0-001f: Device Tree Parameters: [ 1.910817] tc358840 0-001f: reset_gpio = 267 [ 1.910829] tc358840 0-001f: refclk_hz = 48000000 [ 1.910863] tc358840 0-001f: ddc5v_delay = 50 ms [ 1.910872] tc358840 0-001f: enable_hdcp = 0 [ 1.910880] tc358840 0-001f: csi_port = 3 [ 1.910889] tc358840 0-001f: lineinitcnt = 5000 [ 1.910898] tc358840 0-001f: lptxtimecnt = 4 [ 1.910907] tc358840 0-001f: tclk_headercnt = 1573379 [ 1.910916] tc358840 0-001f: tclk_trailcnt = 262149 [ 1.910926] tc358840 0-001f: ths_headercnt = 851972 [ 1.910935] tc358840 0-001f: twakeup = 16000 [ 1.910944] tc358840 0-001f: tclk_postcnt = 10 [ 1.910953] tc358840 0-001f: ths_trailcnt = 524294 [ 1.910961] tc358840 0-001f: hstxvregcnt = 32 [ 1.910970] tc358840 0-001f: pll_prd = 10 [ 1.911000] tc358840 0-001f: pll_fbd = 125 [ 1.911024] tc358840 0-001f: camera_common_regulator_get vif ERR: ffffffffffffffed [ 1.911029] tc358840 0-001f: cannot get regulator vif -19 [ 1.911058] tc358840 0-001f: Releasing System Reset (gpio 0x010B) [ 1.911106] tc358840 0-001f: Chip found @ 7h1F (3160000.i2c) [ 1.911536] tc358840 0-001f: TC358840 ChipID 0x47, Revision 0x00 [ 1.912209] tc358840 0-001f: tc358840_initial_setup(): [ 1.912214] tc358840 0-001f: enable_stream: disable [ 1.912217] tc358840 0-001f: tc358840_sleep_mode(): disable [ 1.913157] tc358840 0-001f: tc358840_init_interrupts(): [ 1.915148] tc358840 0-001f: tc358840_s_dv_timings(): [ 1.915159] tc358840 0-001f: tc358840_s_dv_timings: 1920x1080p60.0 (2200x1125) [ 1.915164] tc358840 0-001f: enable_stream: disable [ 1.915167] tc358840 0-001f: tc358840_set_csi: [ 1.915735] tc358840 0-001f: tc358840_set_csi: Enabling CSI TX0 [ 1.915975] tc358840 0-001f: tc358840_set_pll: [ 1.916234] tc358840 0-001f: tc358840_set_pll: Updating PLL clock of CSI TX0 [ 1.926678] extcon-disp-state external-connection:disp-state: cable 51 state 1 [ 1.926684] Extcon HDMI: HPD enabled [ 1.926723] tegradc 15200000.nvdisplay: hdmi: plugged [ 1.931646] tc358840 0-001f: tc358840_set_csi: Enabling CSI TX1 [ 1.931878] tc358840 0-001f: tc358840_set_pll: [ 1.932144] tc358840 0-001f: tc358840_set_pll: Updating PLL clock of CSI TX1 [ 1.947544] tc358840 0-001f: tc358840_set_splitter(): [ 1.948691] tc358840 0-001f: tc358840_set_ref_clk(): [ 1.951434] tc358840 0-001f: tc358840_set_hdmi_phy(): [ 1.951447] tc358840 0-001f: tc358840_reset_phy: [ 1.953168] tc358840 0-001f: tc358840_set_hdmi_hdcp: disable [ 1.955188] tc358840 0-001f: tc358840_set_hdmi_audio(): [ 1.957352] tc358840 0-001f: tc358840_set_hdmi_info_frame_mode(): DUMMY [ 1.957721] tc358840 0-001f: tc358840_set_csi_mbus_config(): [ 1.957734] tc358840 0-001f: tc358840_set_csi_mbus_config: YCbCr 422 16-bit [ 1.959328] tc358840 0-001f: tc358840 found @ 7h1F (3160000.i2c) [ 1.960204] max77620-power max20024-power: Event recorder REG_NVERC : 0x54 [ 1.966862] tegra-thermal-throttle bthrot_cdev: cpufreq policy is not ready defer [ 1.967176] FAN dev name: pwm-fan [ 1.967254] FAN:gpio request success. [ 1.967265] FAN: can't find tach_gpio [ 1.967294] pwm_fan_driver pwm-fan: Found 2 profiles, default profile is quiet [ 1.967341] pwm_fan_driver pwm-fan: cap state:4, cap pwm:255 [ 1.967621] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 1.967630] pwm_fan_driver pwm-fan: tach period: 1000 [ 1.968220] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 1.968231] pwm_fan_driver pwm-fan: index 1: pwm=130, rpm=1000, rru=2, rrd=2, state:2 [ 1.968240] pwm_fan_driver pwm-fan: index 2: pwm=160, rpm=2000, rru=1, rrd=1, state:2 [ 1.968247] pwm_fan_driver pwm-fan: index 3: pwm=200, rpm=3000, rru=1, rrd=1, state:2 [ 1.968255] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 1.968262] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 1.968270] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 1.968278] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 1.968285] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 1.968293] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 1.969116] tegra-oc-event d280000.soctherm-oc-event: OC driver initialized [ 1.970018] device-mapper: uevent: version 1.0.3 [ 1.970468] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.974255] tegra194_cpufreq_probe: platform driver Initialization: pass [ 1.975449] cpuidle: Initializing cpuidle driver [ 1.976276] sdhci: Secure Digital Host Controller Interface driver [ 1.976280] sdhci: Copyright(c) Pierre Ossman [ 1.976284] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.977233] sdhci-tegra 3460000.sdhci: Client registration for eMC Successful [ 1.979090] CMDQ: cmdq_platfm_init successful [ 1.979590] sdhci-tegra 3440000.sdhci: Got CD GPIO [ 1.981551] sdhci-tegra 3440000.sdhci: Client registration for eMC Successful [ 1.983717] sdhci-tegra 3440000.sdhci: wakeup init done, cdirq 297 [ 1.987678] tegra-se-nvhost 15810000.se: initialized [ 1.988700] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 1.989327] tegra-se-nvhost 15820000.se: initialized [ 1.990524] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 1.991476] tegra-se-nvhost 15830000.se: initialized [ 1.992092] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 1.993011] tegra-se-nvhost 15840000.se: initialized [ 1.993980] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 1.994970] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 1.995196] hidraw: raw HID events driver (C) Jiri Kosina [ 1.997531] usbcore: registered new interface driver usbhid [ 1.997537] usbhid: USB HID core driver [ 2.001497] tegra186-cam-rtcpu bc00000.rtcpu: deferring, 14800000.isp is not probed [ 2.002545] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 2.003082] tegra186-aondbg aondbg: aondbg driver probe() OK [ 2.003587] denver_knobs_init:MTS_VERSION:53250041 [ 2.003896] tegra19x_actmon d230000.actmon: in actmon_register()... [ 2.004495] tegra19x_actmon d230000.actmon: initialization Completed for the device mc_all [ 2.004875] t19x_cache tegra-cache: probed [ 2.007011] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 2.007019] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 2.007392] carmel-pmu-drv carmel-pmu: Registered Carmel PMU [ 2.007759] PLL_AON clock registered [ 2.009444] Clocks initialized successfully [ 2.010921] nvpmodel: initialized successfully [ 2.011881] trusty-virtio trusty:virtio: initializing [ 2.012082] trusty_ipc virtio0: vring0: va(pa) ffffffc1e276e000(0) qsz 32 notifyid 1 [ 2.012092] trusty_ipc virtio0: vring1: va(pa) ffffffc1e2728000(0) qsz 32 notifyid 2 [ 2.012252] trusty-virtio trusty:virtio: initializing done [ 2.012437] trusty_ipc virtio0: is online [ 2.012807] tegra-hda 3510000.hda: Override SDO lines to 4 [ 2.013198] usbcore: registered new interface driver snd-usb-audio [ 2.021405] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit with 64 bit addr [ 2.029460] gpio tegra-gpio wake4 for gpio=105(N:1) [ 2.029512] mmc1: SDHCI controller on 3440000.sdhci [3440000.sdhci] using ADMA 64-bit with 64 bit addr [ 2.039103] input: tegra-hda-xnx HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input0 [ 2.039279] input: tegra-hda-xnx HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input1 [ 2.039430] input: tegra-hda-xnx HDMI/DP,pcm=8 as /devices/3510000.hda/sound/card0/input2 [ 2.039581] input: tegra-hda-xnx HDMI/DP,pcm=9 as /devices/3510000.hda/sound/card0/input3 [ 2.068017] mmc0: mmc_decode_ext_csd: CMDQ supported: depth: 31, cmdq_support: 1 [ 2.081211] mmc0: periodic cache flush enabled [ 2.081226] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 2.081684] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 2.081895] mmcblk0boot0: mmc0:0001 DG4016 partition 1 4.00 MiB [ 2.082103] mmcblk0boot1: mmc0:0001 DG4016 partition 2 4.00 MiB [ 2.082293] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB [ 2.085178] OPE platform probe [ 2.085277] OPE platform probe successful [ 2.092017] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 [ 2.162660] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 2.162766] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 2.162864] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 2.162962] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 2.163066] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 2.163164] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 2.163259] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 2.163354] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 2.163467] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 2.163590] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 2.163712] tegra-asoc: sound: ADMAIF11 <-> ADMAIF11 mapping ok [ 2.163811] tegra-asoc: sound: ADMAIF12 <-> ADMAIF12 mapping ok [ 2.163914] tegra-asoc: sound: ADMAIF13 <-> ADMAIF13 mapping ok [ 2.164003] tegra-asoc: sound: ADMAIF14 <-> ADMAIF14 mapping ok [ 2.164096] tegra-asoc: sound: ADMAIF15 <-> ADMAIF15 mapping ok [ 2.164169] tegra-asoc: sound: ADMAIF16 <-> ADMAIF16 mapping ok [ 2.164242] tegra-asoc: sound: ADMAIF17 <-> ADMAIF17 mapping ok [ 2.164347] tegra-asoc: sound: ADMAIF18 <-> ADMAIF18 mapping ok [ 2.164423] tegra-asoc: sound: ADMAIF19 <-> ADMAIF19 mapping ok [ 2.164518] tegra-asoc: sound: ADMAIF20 <-> ADMAIF20 mapping ok [ 2.191468] u32 classifier [ 2.191475] Actions configured [ 2.191544] Initializing XFRM netlink socket [ 2.192086] NET: Registered protocol family 10 [ 2.192795] NET: Registered protocol family 17 [ 2.192808] NET: Registered protocol family 15 [ 2.192878] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 2.192965] Bluetooth: RFCOMM socket layer initialized [ 2.192989] Bluetooth: RFCOMM ver 1.11 [ 2.192995] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.193001] Bluetooth: HIDP socket layer initialized [ 2.193019] 9pnet: Installing 9P2000 support [ 2.193054] Key type dns_resolver registered [ 2.193318] Registered cp15_barrier emulation handler [ 2.193389] Registered setend emulation handler [ 2.195090] registered taskstats version 1 [ 2.195331] tegra-pcie-dw 14160000.pcie: Setting init speed to max speed [ 2.196626] OF: PCI: host bridge /pcie@14160000 ranges: [ 2.196666] OF: PCI: IO 0x36100000..0x361fffff -> 0x36100000 [ 2.196686] OF: PCI: MEM 0x1740000000..0x17ffffffff -> 0x40000000 [ 2.196704] OF: PCI: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 2.481411] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 2.709553] tegra-pcie-dw 14160000.pcie: link is down [ 2.709718] tegra-pcie-dw 14160000.pcie: PCI host bridge to bus 0004:00 [ 2.709728] pci_bus 0004:00: root bus resource [bus 00-ff] [ 2.709747] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 2.709759] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 2.709764] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 2.709797] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 2.709937] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 2.710143] iommu: Adding device 0004:00:00.0 to group 59 [ 2.710417] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 2.710441] pci 0004:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 2.710679] pcieport 0004:00:00.0: Signaling PME through PCIe PME interrupt [ 2.710687] pcie_pme 0004:00:00.0:pcie001: service driver pcie_pme loaded [ 2.710781] aer 0004:00:00.0:pcie002: service driver aer loaded [ 2.710956] pcie_pme 0004:00:00.0:pcie001: unloading service driver pcie_pme [ 2.711037] aer 0004:00:00.0:pcie002: unloading service driver aer [ 2.711116] pci_bus 0004:01: busn_res: [bus 01-ff] is released [ 2.711225] iommu: Removing device 0004:00:00.0 from group 59 [ 2.711287] pci_bus 0004:00: busn_res: [bus 00-ff] is released [ 2.712822] tegra-pcie-dw 14160000.pcie: PCIe link is not up...! [ 2.713524] tegra-pcie-dw 141a0000.pcie: Setting init speed to max speed [ 2.713743] tegra-pcie-dw 141a0000.pcie: Failed to get 3V slot regulator: -19 [ 2.713752] tegra-pcie-dw 141a0000.pcie: Failed to get 12V slot regulator: -19 [ 2.821705] OF: PCI: host bridge /pcie@141a0000 ranges: [ 2.821735] OF: PCI: IO 0x3a100000..0x3a1fffff -> 0x3a100000 [ 2.821755] OF: PCI: MEM 0x1f40000000..0x1fffffffff -> 0x40000000 [ 2.821770] OF: PCI: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 3.333457] tegra-pcie-dw 141a0000.pcie: link is down [ 3.333638] tegra-pcie-dw 141a0000.pcie: PCI host bridge to bus 0005:00 [ 3.333647] pci_bus 0005:00: root bus resource [bus 00-ff] [ 3.333665] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 3.333677] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 3.333682] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 3.333710] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 3.333842] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 3.334040] iommu: Adding device 0005:00:00.0 to group 59 [ 3.334357] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 3.334380] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 3.334574] pcieport 0005:00:00.0: Signaling PME through PCIe PME interrupt [ 3.334582] pcie_pme 0005:00:00.0:pcie001: service driver pcie_pme loaded [ 3.334652] aer 0005:00:00.0:pcie002: service driver aer loaded [ 3.334804] pcie_pme 0005:00:00.0:pcie001: unloading service driver pcie_pme [ 3.334887] aer 0005:00:00.0:pcie002: unloading service driver aer [ 3.334951] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 3.335092] iommu: Removing device 0005:00:00.0 from group 59 [ 3.335162] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 3.337306] tegra-pcie-dw 141a0000.pcie: PCIe link is not up...! [ 3.346107] tegra-cbb 14040000.cv-noc: noc_secure_irq = 91, noc_nonsecure_irq = 90> [ 3.350463] tegra194-isp5 14800000.isp: initialized [ 3.357554] tegra194-vi5 15c10000.vi: using default number of vi channels, 36 [ 3.360647] tegra194-vi5 15c10000.vi: initialized [ 3.364524] tegra194-vi5 15c10000.vi: subdev tc358840 0-001f bound [ 3.364552] tegra194-vi5 15c10000.vi: subdev 15a00000.nvcsi--1 bound [ 3.364758] tc358840 0-001f: tc358840_enum_mbus_code() [ 3.364763] tc358840 0-001f: tc358840_enum_mbus_code() [ 3.364767] tc358840 0-001f: tc358840_enum_mbus_code() [ 3.364965] tc358840 0-001f: tc358840_get_fmt(): [ 3.364971] tc358840 0-001f: tc358840_get_fmt(): width=1920, height=1080, code=0x0000200F, field=1 [ 3.365805] tegra-thermal-throttle bthrot_cdev: clk:cpu max:1907200000, min:115200000 steps:24 [ 3.370060] tegra-thermal-throttle bthrot_cdev: clk:gpu max:1109250000, min:114750000 steps:10 [ 3.370080] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced clk:0:cpu off:0 slope-adj:200 [ 3.370087] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced clk:1:gpu off:0 slope-adj:400 [ 3.370174] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced max_state:48 cutoff:0 [ 3.370201] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced clk:0:cpu off:0 slope-adj:400 [ 3.370205] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced clk:1:gpu off:0 slope-adj:400 [ 3.374155] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced max_state:40 cutoff:1 [ 3.374202] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced clk:0:cpu off:0 slope-adj:200 [ 3.374207] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced clk:1:gpu off:365500000 slope-adj:300 [ 3.374558] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced max_state:48 cutoff:0 [ 3.374595] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced clk:0:cpu off:38400000 slope-adj:10 [ 3.374601] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced clk:1:gpu off:25500000 slope-adj:10 [ 3.374950] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced max_state:2 cutoff:0 [ 3.374989] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced clk:0:cpu off:0 slope-adj:400 [ 3.374993] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced clk:1:gpu off:0 slope-adj:400 [ 3.375196] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced max_state:40 cutoff:1 [ 3.375906] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 3.454717] tegra-ivc ivc-bc00000.rtcpu: region 0: iova=0xbfee0000-0xbfefffff size=131072 [ 3.455044] tegra-ivc ivc-bc00000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 3.455253] tegra-ivc ivc-bc00000.rtcpu:dbg@1: dbg: ver=0 grp=1 RX[1x384]=0x1900-0x1b00 TX[1x384]=0x1b00-0x1d00 [ 3.455427] tegra-ivc ivc-bc00000.rtcpu:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d00-0x3d80 TX[1x8192]=0x3d80-0x5e00 [ 3.455729] tegra-ivc ivc-bc00000.rtcpu:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e00-0xae80 TX[64x320]=0xae80-0xff00 [ 3.455792] tegra-ivc ivc-bc00000.rtcpu:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff00-0x17f80 TX[512x64]=0x17f80-0x20000 [ 3.456050] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (66) [ 3.456054] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 3.456908] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=5 sha1=06bdc710c3c9a48de2881774602bbcf4d0114a58 [ 3.457319] Wake83 for irq=211 [ 3.457420] gpio tegra-gpio wake67 for gpio=48(G:0) [ 3.457500] gpio tegra-gpio-aon wake29 for gpio=36(EE:4) [ 3.457634] input: gpio-keys as /devices/gpio-keys/input/input4 [ 3.490448] tegra_rtc c2a0000.rtc: setting system clock to 2000-01-01 01:00:23 UTC (946688423) [ 3.490825] mmcblk mmc0:0001: Card claimed for testing. [ 3.525400] bpmp: mounted debugfs mirror [ 3.531445] ALSA device list: [ 3.531453] #0: tegra-hda-xnx at 0x3518000 irq 65 [ 3.531457] #1: jetson-xaviernx-ape [ 3.533000] Freeing unused kernel memory: 8576K [ 3.570916] Root device found: mmcblk0p1 [ 3.573116] Found dev node: /dev/mmcblk0p1 [ 3.949569] EXT4-fs (mmcblk0p1): 25 orphan inodes deleted [ 3.949575] EXT4-fs (mmcblk0p1): recovery complete [ 3.958309] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.961449] Rootfs mounted over mmcblk0p1 [ 3.981433] Switching from initrd to actual rootfs [ 4.062044] systemd[1]: System time before build time, advancing clock. [ 4.083794] ip_tables: (C) 2000-2006 Netfilter Core Team [ 4.087530] cgroup: cgroup2: unknown option "nsdelegate" [ 4.092946] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 4.093577] systemd[1]: Detected architecture arm64. [ 4.099989] systemd[1]: Set hostname to . [ 4.177416] tegra-xusb 3610000.xhci: entering ELPG [ 4.180669] tegra-xusb 3610000.xhci: entering ELPG done [ 4.182690] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 4.182701] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 4.322330] random: systemd: uninitialized urandom read (16 bytes read) [ 4.322613] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 4.322734] random: systemd: uninitialized urandom read (16 bytes read) [ 4.322755] systemd[1]: Reached target Swap. [ 4.322784] random: systemd: uninitialized urandom read (16 bytes read) [ 4.322810] systemd[1]: Reached target User and Group Name Lookups. [ 4.323396] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 4.327534] systemd[1]: Created slice User and Session Slice. [ 4.389644] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 4.430856] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:291 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 4.689470] tegra_cec 3960000.tegra_cec: timeout in tegra_cec_native_write_l:172. [ 4.689712] tegra_cec 3960000.tegra_cec: Sent res: -62. [ 4.689873] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 4.706410] systemd-journald[2327]: Received request to flush runtime journal from PID 1 [ 5.510213] tc358840: module is already loaded [ 5.612859] using random self ethernet address [ 5.613016] using random host ethernet address [ 5.640119] cpu-throttle-alert cooling device registered. [ 5.641829] gpu-throttle-alert cooling device registered. [ 5.643131] aux-throttle-alert cooling device registered. [ 5.803076] random: crng init done [ 5.803233] random: 7 urandom warning(s) missed due to ratelimiting [ 6.320911] Mass Storage Function, version: 2009/09/11 [ 6.320921] LUN: removable file: (no medium) [ 6.329046] using random self ethernet address [ 6.329211] using random host ethernet address [ 6.410262] rndis0: HOST MAC 2a:da:6f:00:4b:f8 [ 6.410499] rndis0: MAC 2a:da:6f:00:4b:f9 [ 6.411154] usb0: HOST MAC 2a:da:6f:00:4b:fa [ 6.411191] usb0: MAC 2a:da:6f:00:4b:fb [ 6.411214] tegra-xudc-new 3550000.xudc: exiting ELPG [ 6.414344] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 6.414365] tegra-xudc-new 3550000.xudc: ep 0 (type: 0, dir: out) enabled [ 6.414399] tegra-xudc-new 3550000.xudc: entering ELPG [ 6.418459] tegra-xudc-new 3550000.xudc: entering ELPG done [ 6.418486] tegra-xudc-new 3550000.xudc: exiting ELPG [ 6.419780] l4tbr0: port 1(rndis0) entered blocking state [ 6.419787] l4tbr0: port 1(rndis0) entered disabled state [ 6.419946] device rndis0 entered promiscuous mode [ 6.424073] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 6.424087] tegra-xudc-new 3550000.xudc: entering ELPG [ 6.425244] tegra-xudc-new 3550000.xudc: entering ELPG done [ 6.429466] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 6.437106] l4tbr0: port 2(usb0) entered blocking state [ 6.437114] l4tbr0: port 2(usb0) entered disabled state [ 6.437820] device usb0 entered promiscuous mode [ 6.448934] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 6.677985] ras_fhi_disable: FHI 474 disabled [ 6.678574] CPU4: shutdown [ 6.679629] psci: CPU4 killed (polled 0 ms) [ 6.729979] ras_fhi_disable: FHI 475 disabled [ 6.732024] CPU5: shutdown [ 6.733864] psci: CPU5 killed (polled 4 ms) [ 6.739520] nvgpu: 17000000.gv11b tpc_pg_mask_store:843 [INFO] no value change, same mask already set [ 6.744519] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 7.061943] zram: Added device: zram0 [ 7.062390] gpio tegra-gpio wake20 for gpio=52(G:4) [ 7.065623] zram: Added device: zram1 [ 7.068341] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 7.069527] zram: Added device: zram2 [ 7.070200] zram: Added device: zram3 [ 7.100463] zram0: detected capacity change from 0 to 1017847808 [ 7.191597] Adding 993988k swap on /dev/zram0. Priority:5 extents:1 across:993988k SS [ 7.194840] zram1: detected capacity change from 0 to 1017847808 [ 7.223888] Adding 993988k swap on /dev/zram1. Priority:5 extents:1 across:993988k SS [ 7.235639] zram2: detected capacity change from 0 to 1017847808 [ 7.267127] Adding 993988k swap on /dev/zram2. Priority:5 extents:1 across:993988k SS [ 7.283194] zram3: detected capacity change from 0 to 1017847808 [ 7.295996] Adding 993988k swap on /dev/zram3. Priority:5 extents:1 across:993988k SS [ 7.714167] Bridge firewalling registered [ 7.736636] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 8.177344] Netfilter messages via NETLINK v0.30. [ 8.182783] ctnetlink v0.93: registering with nfnetlink. [ 8.486169] tegradc 15200000.nvdisplay: unblank [ 8.486182] tegradc 15210000.nvdisplay: blank - powerdown [ 8.496854] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 9.173798] fuse init (API version 7.26) [ 11.750567] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 11.750581] Bluetooth: BNEP socket layer initialized [ 12.113429] tc358840 0-001f: tc358840_delayed_work_enable_interrupt: [ 12.113666] tc358840 0-001f: tc358840_enable_interrupts: cable connected = 1 [ 12.114612] tc358840 0-001f: tc358840_s_edid, pad 0, start block 0, blocks 2 [ 12.114618] tc358840 0-001f: tc358840_disable_edid: [ 12.151764] tc358840 0-001f: tc358840_enable_edid: [ 12.151777] tc358840 0-001f: tc358840_enable_interrupts: cable connected = 1 [ 12.152876] tc358840 0-001f: tc358840_process_isr: [ 12.153083] tc358840 0-001f: tc358840_isr: IntStatus = 0x0200 [ 12.157077] tc358840 0-001f: tc358840_hdmi_sys_int_handler: SYS_INT = 0x01 [ 12.157289] tc358840 0-001f: tc358840_hdmi_sys_int_handler: Tx 5V power present: yes [ 12.157295] tc358840 0-001f: tc358840_enable_edid: [ 12.157300] tc358840 0-001f: tc358840_enable_interrupts: cable connected = 1 [ 12.253496] tc358840 0-001f: tc358840_delayed_work_enable_hotplug: [ 12.998171] tc358840 0-001f: tc358840_process_isr: [ 12.998419] tc358840 0-001f: tc358840_isr: IntStatus = 0x0200 [ 13.002395] tc358840 0-001f: tc358840_hdmi_clk_int_handler: CLK_INT = 0x20 [ 13.002404] tc358840 0-001f: tc358840_hdmi_clk_int_handler: DE size or position has changed [ 13.011136] tc358840 0-001f: tc358840_process_isr: [ 13.011373] tc358840 0-001f: tc358840_isr: IntStatus = 0x0200 [ 13.015206] tc358840 0-001f: tc358840_hdmi_clk_int_handler: CLK_INT = 0x20 [ 13.015215] tc358840 0-001f: tc358840_hdmi_clk_int_handler: DE size or position has changed [ 13.044497] tc358840 0-001f: tc358840_process_isr: [ 13.044757] tc358840 0-001f: tc358840_isr: IntStatus = 0x0200 [ 13.048710] tc358840 0-001f: tc358840_hdmi_clk_int_handler: CLK_INT = 0x20 [ 13.048720] tc358840 0-001f: tc358840_hdmi_clk_int_handler: DE size or position has changed [ 13.077892] tc358840 0-001f: tc358840_process_isr: [ 13.078149] tc358840 0-001f: tc358840_isr: IntStatus = 0x0200 [ 13.081955] tc358840 0-001f: tc358840_hdmi_clk_int_handler: CLK_INT = 0x20 [ 13.081964] tc358840 0-001f: tc358840_hdmi_clk_int_handler: DE size or position has changed [ 13.114721] tc358840 0-001f: tc358840_process_isr: [ 13.114961] tc358840 0-001f: tc358840_isr: IntStatus = 0x0200 [ 13.119016] tc358840 0-001f: tc358840_hdmi_misc_int_handler: MISC_INT = 0x02 [ 13.125055] tc358840 0-001f: enable_stream: disable [ 13.125073] tc358840 0-001f: tc358840_format_change: New format: 3840x2160p30.0 (4400x2245) [ 13.125078] tc358840 0-001f: tc358840_s_dv_timings(): [ 13.125082] tc358840 0-001f: tc358840_s_dv_timings: 3840x2160p30.0 (4400x2245) [ 13.125086] tc358840 0-001f: enable_stream: disable [ 13.125090] tc358840 0-001f: tc358840_set_csi: [ 13.126281] tc358840 0-001f: tc358840_set_csi: Enabling CSI TX0 [ 13.126502] tc358840 0-001f: tc358840_set_pll: [ 13.126757] tc358840 0-001f: tc358840_set_pll: Updating PLL clock of CSI TX0 [ 13.142201] tc358840 0-001f: tc358840_set_csi: Enabling CSI TX1 [ 13.142431] tc358840 0-001f: tc358840_set_pll: [ 13.142689] tc358840 0-001f: tc358840_set_pll: Updating PLL clock of CSI TX1 [ 13.157981] tc358840 0-001f: tc358840_set_splitter(): [ 23.863733] tegra-xusb 3610000.xhci: exiting ELPG [ 23.868235] tegra-xusb 3610000.xhci: Firmware timestamp: 2020-09-11 16:55:03 UTC, Version: 60.09 release [ 23.868872] tegra-xusb 3610000.xhci: exiting ELPG done [ 24.093398] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 24.113828] usb 1-2: New USB device found, idVendor=1a40, idProduct=0101 [ 24.113844] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 24.113850] usb 1-2: Product: USB 2.0 Hub [ 24.116050] hub 1-2:1.0: USB hub found [ 24.116236] hub 1-2:1.0: 4 ports detected [ 24.421440] usb 1-2.1: new low-speed USB device number 3 using tegra-xusb [ 24.462116] usb 1-2.1: New USB device found, idVendor=03f0, idProduct=034a [ 24.462126] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 24.462162] usb 1-2.1: Product: HP Elite USB Keyboard [ 24.462167] usb 1-2.1: Manufacturer: Chicony [ 24.472608] input: Chicony HP Elite USB Keyboard as /devices/3610000.xhci/usb1/1-2/1-2.1/1-2.1:1.0/0003:03F0:034A.0001/input/input5 [ 24.530316] hid-generic 0003:03F0:034A.0001: input,hidraw0: USB HID v1.10 Keyboard [Chicony HP Elite USB Keyboard] on usb-3610000.xhci-2.1/input0 [ 24.540123] input: Chicony HP Elite USB Keyboard as /devices/3610000.xhci/usb1/1-2/1-2.1/1-2.1:1.1/0003:03F0:034A.0002/input/input6 [ 24.597858] hid-generic 0003:03F0:034A.0002: input,hidraw1: USB HID v1.10 Device [Chicony HP Elite USB Keyboard] on usb-3610000.xhci-2.1/input1 [ 24.697404] usb 1-2.2: new low-speed USB device number 4 using tegra-xusb [ 24.722055] usb 1-2.2: New USB device found, idVendor=03f0, idProduct=1041 [ 24.722064] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 24.722069] usb 1-2.2: Product: HP Travel USB Optical Mouse [ 24.722073] usb 1-2.2: Manufacturer: PixArt [ 24.727205] input: PixArt HP Travel USB Optical Mouse as /devices/3610000.xhci/usb1/1-2/1-2.2/1-2.2:1.0/0003:03F0:1041.0003/input/input7 [ 24.728025] hid-generic 0003:03F0:1041.0003: input,hidraw2: USB HID v1.11 Mouse [PixArt HP Travel USB Optical Mouse] on usb-3610000.xhci-2.2/input0 [ 24.809402] usb 1-2.4: new high-speed USB device number 5 using tegra-xusb [ 24.832012] usb 1-2.4: New USB device found, idVendor=0781, idProduct=cfc5 [ 24.832021] usb 1-2.4: New USB device strings: Mfr=3, Product=4, SerialNumber=5 [ 24.832027] usb 1-2.4: Product: SDDR-339 [ 24.832032] usb 1-2.4: Manufacturer: SanDisk [ 24.832037] usb 1-2.4: SerialNumber: 101018009808 [ 24.833310] usb-storage 1-2.4:1.0: USB Mass Storage device detected [ 24.836236] scsi host0: usb-storage 1-2.4:1.0 [ 25.842678] scsi 0:0:0:0: Direct-Access SanDisk SDDR-339 1036 PQ: 0 ANSI: 6 [ 26.256232] sd 0:0:0:0: [sda] 61765632 512-byte logical blocks: (31.6 GB/29.5 GiB) [ 26.256968] sd 0:0:0:0: [sda] Write Protect is off [ 26.257100] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00 [ 26.257740] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 26.265048] sda: sda1 [ 26.267463] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 34.129494] vdd-sdmmc1-sw: disabling [ 34.129528] vdd-1v8-sd: disabling [ 34.129535] vdd-1v8-cvb: disabling [ 34.129540] vdd-epb-1v0: disabling [ 34.129545] avdd-cam-2v8: disabling [ 34.129550] vdd-fan: disabling [ 34.129555] vdd_sys_en: disabling [ 46.433432] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 46.433443] Extcon AUX1(HDMI) disable [ 46.461162] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 46.464171] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 46.464633] tegradc 15200000.nvdisplay: blank - powerdown [ 46.464883] extcon-disp-state external-connection:disp-state: cable 51 state 0 [ 46.464891] Extcon HDMI: HPD disabled [ 46.464977] tegradc 15200000.nvdisplay: hdmi: unplugged [ 46.476051] tegradc 15200000.nvdisplay: blank - powerdown [ 46.476068] tegradc 15200000.nvdisplay: unblank [ 46.476087] tegradc 15200000.nvdisplay: unblank [ 46.476096] tegradc 15210000.nvdisplay: blank - powerdown [ 48.867049] tegradc 15200000.nvdisplay: blank - powerdown [ 48.867131] tegradc 15200000.nvdisplay: unblank [ 48.869178] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 48.869586] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 48.878533] Parent Clock set for DC plld2 [ 48.883595] tegradc 15200000.nvdisplay: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 48.885041] tegradc 15200000.nvdisplay: hdmi: get YCC quant from EDID. [ 48.920830] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 48.920834] Extcon AUX1(HDMI) enable [ 48.921931] extcon-disp-state external-connection:disp-state: cable 51 state 1 [ 48.921935] Extcon HDMI: HPD enabled [ 48.921962] tegradc 15200000.nvdisplay: hdmi: plugged [ 48.926131] tegradc 15200000.nvdisplay: unblank [ 48.926145] tegradc 15210000.nvdisplay: blank - powerdown [ 65.593853] tegradc 15200000.nvdisplay: blank - powerdown [ 65.651979] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 65.651984] Extcon AUX1(HDMI) disable [ 65.674212] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 65.675354] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 65.675530] tegradc 15210000.nvdisplay: blank - powerdown [ 65.830587] tegradc 15200000.nvdisplay: blank - powerdown [ 65.830604] tegradc 15200000.nvdisplay: unblank [ 65.831434] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 65.831557] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 65.833171] Parent Clock set for DC plld2 [ 65.837331] tegradc 15200000.nvdisplay: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 65.838799] tegradc 15200000.nvdisplay: hdmi: get YCC quant from EDID. [ 65.877161] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 65.877165] Extcon AUX1(HDMI) enable [ 65.877513] tegradc 15200000.nvdisplay: unblank [ 65.877527] tegradc 15210000.nvdisplay: blank - powerdown [ 69.144265] tegradc 15200000.nvdisplay: unblank [ 69.144279] tegradc 15210000.nvdisplay: blank - powerdown [ 71.806374] EXT4-fs (sda1): warning: mounting fs with errors, running e2fsck is recommended [ 71.809947] EXT4-fs (sda1): recovery complete [ 71.813034] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 354.321865] FAN rising trip_level:1 cur_temp:46250 trip_temps[2]:60000 [ 382.289388] EXT4-fs (sda1): error count since last fsck: 10 [ 382.289561] EXT4-fs (sda1): initial error at time 1508132758: __ext4_journal_start_sb:62 [ 382.289740] EXT4-fs (sda1): last error at time 1508132740: ext4_lookup:1437: inode 1846902 [ 687.572617] tc358840 0-001f: tc358840_g_input_status(): [ 687.573059] tc358840 0-001f: tc358840_g_input_status: status = 0x0 [ 687.574158] tc358840 0-001f: tc358840_enum_framesizes() [ 687.574376] tc358840 0-001f: tc358840_get_fmt(): [ 687.574382] tc358840 0-001f: tc358840_get_fmt(): width=3840, height=2160, code=0x0000200F, field=1 [ 687.574385] tc358840 0-001f: tc358840_set_fmt(): [ 687.574573] tc358840 0-001f: tc358840_get_fmt(): [ 687.574577] tc358840 0-001f: tc358840_get_fmt(): width=3840, height=2160, code=0x0000200F, field=1 [ 687.574580] tc358840 0-001f: tc358840_set_fmt(): [ 687.574606] tc358840 0-001f: tc358840_enum_framesizes() [ 687.574791] tc358840 0-001f: tc358840_get_fmt(): [ 687.574795] tc358840 0-001f: tc358840_get_fmt(): width=3840, height=2160, code=0x0000200F, field=1 [ 687.574798] tc358840 0-001f: tc358840_set_fmt(): [ 687.574979] tc358840 0-001f: tc358840_get_fmt(): [ 687.574983] tc358840 0-001f: tc358840_get_fmt(): width=3840, height=2160, code=0x0000200F, field=1 [ 687.574986] tc358840 0-001f: tc358840_set_fmt(): [ 687.575006] tc358840 0-001f: tc358840_enum_framesizes() [ 687.575190] tc358840 0-001f: tc358840_get_fmt(): [ 687.575194] tc358840 0-001f: tc358840_get_fmt(): width=3840, height=2160, code=0x0000200F, field=1 [ 687.575196] tc358840 0-001f: tc358840_set_fmt(): [ 687.575379] tc358840 0-001f: tc358840_get_fmt(): [ 687.575383] tc358840 0-001f: tc358840_get_fmt(): width=3840, height=2160, code=0x0000200F, field=1 [ 687.575385] tc358840 0-001f: tc358840_set_fmt(): [ 687.575741] tc358840 0-001f: tc358840_get_fmt(): [ 687.575746] tc358840 0-001f: tc358840_get_fmt(): width=3840, height=2160, code=0x0000200F, field=1 [ 687.575750] tc358840 0-001f: tc358840_set_fmt(): [ 687.575937] tc358840 0-001f: tc358840_get_fmt(): [ 687.575941] tc358840 0-001f: tc358840_get_fmt(): width=3840, height=2160, code=0x0000200F, field=1 [ 687.575945] tc358840 0-001f: tc358840_set_fmt(): [ 687.575950] tc358840 0-001f: tc358840_set_fmt(): format->which=1 [ 687.575954] tc358840 0-001f: enable_stream: disable [ 687.575958] tc358840 0-001f: tc358840_set_csi: [ 687.579074] tc358840 0-001f: tc358840_set_csi: Enabling CSI TX0 [ 687.579301] tc358840 0-001f: tc358840_set_pll: [ 687.579557] tc358840 0-001f: tc358840_set_pll: Updating PLL clock of CSI TX0 [ 687.595113] tc358840 0-001f: tc358840_set_csi: Enabling CSI TX1 [ 687.595346] tc358840 0-001f: tc358840_set_pll: [ 687.595762] tc358840 0-001f: tc358840_set_pll: Updating PLL clock of CSI TX1 [ 687.613266] tc358840 0-001f: tc358840_set_csi_mbus_config(): [ 687.613275] tc358840 0-001f: tc358840_set_csi_mbus_config: YCbCr 422 16-bit [ 687.639876] tc358840 0-001f: tc358840_s_stream(): [ 687.639885] tc358840 0-001f: enable_stream: enable [ 687.643126] tc358840 0-001f: enable_stream: Stream enabled! Remaining timeout attempts: 100 [ 687.689411] [RCE] vi5_hwinit: firmware CL2018101701 protocol version 2.2 [ 757.521843] FAN rising trip_level:2 cur_temp:60050 trip_temps[3]:68000 [ 937.841897] FAN rising trip_level:3 cur_temp:68300 trip_temps[4]:76000 [ 954.641962] FAN cooling trip_level:2 cur_temp:60600 trip_temps[3]:68000 [ 966.961991] FAN cooling trip_level:1 cur_temp:51550 trip_temps[2]:60000 [ 1157.361934] FAN cooling trip_level:0 cur_temp:37800 trip_temps[1]:46000 [ 1415.628119] usb 1-2: USB disconnect, device number 2 [ 1415.628130] usb 1-2.1: USB disconnect, device number 3 [ 1415.765767] usb 1-2.2: USB disconnect, device number 4 [ 1415.823284] usb 1-2.4: USB disconnect, device number 5 [ 1416.013669] usb usb1: usb_suspend_both: status 0 [ 1416.013685] tegra-xusb 3610000.xhci: entering ELPG [ 1416.016889] tegra-xusb 3610000.xhci: entering ELPG done [26592.593412] tegra194-vi5 15c10000.vi: no reply from camera processor [26592.593571] tegra194-vi5 15c10000.vi: uncorr_err: request timed out after 2500 ms [26592.593715] tegra194-vi5 15c10000.vi: err_rec: attempting to reset the capture channel [26592.599329] ------------[ cut here ]------------ [26592.599465] WARNING: CPU: 3 PID: 8706 at /mnt/hd2/sk_nx/32.6.1/Linux_for_Tegra/source/public/kernel_src/kernel/nvidia/drivers/media/platform/tegra/camera/vi/capture_vi_channel.c:452 vi_channel_close_ex+0x80/0x88 [26592.599775] Modules linked in: bnep fuse xt_conntrack ipt_MASQUERADE nf_nat_masquerade_ipv4 nf_conntrack_netlink nfnetlink xt_addrtype iptable_filter iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack br_netfilter zram overlay userspace_alert nvgpu ip_tables x_tables [26592.599877] CPU: 3 PID: 8706 Comm: vi-output, tc35 Not tainted 4.9.253-tegra #4 [26592.599882] Hardware name: NVIDIA Jetson Xavier NX Developer Kit (DT) [26592.599888] task: ffffffc1e2854600 task.stack: ffffffc1bc7dc000 [26592.599894] PC is at vi_channel_close_ex+0x80/0x88 [26592.599900] LR is at vi_channel_close_ex+0x40/0x88 [26592.599905] pc : [] lr : [] pstate: a0c00045 [26592.599914] sp : ffffffc1bc7dfd10 [26592.599918] x29: ffffffc1bc7dfd10 x28: 0000000000000000 [26592.599930] x27: 0000000000000000 x26: 0000000000000000 [26592.599940] x25: 0000000000000000 x24: 0000000000000000 [26592.599952] x23: ffffffc1e0550048 x22: ffffffc1e04a9228 [26592.599962] x21: ffffffc1e04a9218 x20: ffffffc1979e9b00 [26592.599972] x19: 0000000000000000 x18: 000000000000834f [26592.599982] x17: 0000000000000002 x16: 0000000000000003 [26592.599992] x15: 0000000000000255 x14: 0000000000000000 [26592.600002] x13: 0000000000000000 x12: 0000000000000400 [26592.600013] x11: 0000000000000400 x10: 0000000000000000 [26592.600028] x9 : ffffffc1bc7dfa80 x8 : 0000000000000001 [26592.600042] x7 : ffffffc171146880 x6 : ffffffc1979e9cc0 [26592.600056] x5 : ffffff8008b393fc x4 : ffffffbf06679d10 [26592.600070] x3 : 000000010010000c x2 : ffffffc199e77400 [26592.600084] x1 : 0000000000000000 x0 : 0000000000000009 [26592.600100] ---[ end trace 45f70b62c5844dd7 ]--- [26592.600185] Call trace: [26592.600194] [] vi_channel_close_ex+0x80/0x88 [26592.600201] [] vi5_channel_error_recover+0x48/0x1c8 [26592.600210] [] tegra_channel_error_recover+0x58/0x90 [26592.600216] [] tegra_channel_kthread_capture_dequeue+0xf8/0x1c0 [26592.600225] [] kthread+0xec/0xf0 [26592.600232] [] ret_from_fork+0x10/0x30 [26592.602121] tegra194-vi5 15c10000.vi: fatal: error recovery failed [55874.752636] tegra-xusb 3610000.xhci: exiting ELPG [55874.756857] tegra-xusb 3610000.xhci: Firmware timestamp: 2020-09-11 16:55:03 UTC, Version: 60.09 release [55874.757516] tegra-xusb 3610000.xhci: exiting ELPG done [55874.758917] usb usb2: usb_suspend_both: status 0 [55874.985382] usb 1-2: new high-speed USB device number 6 using tegra-xusb [55875.005729] usb 1-2: New USB device found, idVendor=1a40, idProduct=0101 [55875.005735] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [55875.005739] usb 1-2: Product: USB 2.0 Hub [55875.007233] hub 1-2:1.0: USB hub found [55875.007321] hub 1-2:1.0: 4 ports detected [55875.313382] usb 1-2.1: new low-speed USB device number 7 using tegra-xusb [55875.353796] usb 1-2.1: New USB device found, idVendor=03f0, idProduct=034a [55875.353803] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [55875.353807] usb 1-2.1: Product: HP Elite USB Keyboard [55875.353811] usb 1-2.1: Manufacturer: Chicony [55875.363761] input: Chicony HP Elite USB Keyboard as /devices/3610000.xhci/usb1/1-2/1-2.1/1-2.1:1.0/0003:03F0:034A.0004/input/input8 [55875.422223] hid-generic 0003:03F0:034A.0004: input,hidraw0: USB HID v1.10 Keyboard [Chicony HP Elite USB Keyboard] on usb-3610000.xhci-2.1/input0 [55875.431976] input: Chicony HP Elite USB Keyboard as /devices/3610000.xhci/usb1/1-2/1-2.1/1-2.1:1.1/0003:03F0:034A.0005/input/input9 [55875.489817] hid-generic 0003:03F0:034A.0005: input,hidraw1: USB HID v1.10 Device [Chicony HP Elite USB Keyboard] on usb-3610000.xhci-2.1/input1 [55875.589379] usb 1-2.2: new low-speed USB device number 8 using tegra-xusb [55875.613639] usb 1-2.2: New USB device found, idVendor=03f0, idProduct=1041 [55875.613647] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [55875.613651] usb 1-2.2: Product: HP Travel USB Optical Mouse [55875.613654] usb 1-2.2: Manufacturer: PixArt [55875.616783] input: PixArt HP Travel USB Optical Mouse as /devices/3610000.xhci/usb1/1-2/1-2.2/1-2.2:1.0/0003:03F0:1041.0006/input/input10 [55875.617543] hid-generic 0003:03F0:1041.0006: input,hidraw2: USB HID v1.11 Mouse [PixArt HP Travel USB Optical Mouse] on usb-3610000.xhci-2.2/input0 [55875.697392] usb 1-2.4: new high-speed USB device number 9 using tegra-xusb [55875.719717] usb 1-2.4: New USB device found, idVendor=0781, idProduct=cfc5 [55875.719724] usb 1-2.4: New USB device strings: Mfr=3, Product=4, SerialNumber=5 [55875.719728] usb 1-2.4: Product: SDDR-339 [55875.719731] usb 1-2.4: Manufacturer: SanDisk [55875.719735] usb 1-2.4: SerialNumber: 101018009808 [55875.721108] usb-storage 1-2.4:1.0: USB Mass Storage device detected [55875.726080] scsi host0: usb-storage 1-2.4:1.0 [55876.754434] scsi 0:0:0:0: Direct-Access SanDisk SDDR-339 1036 PQ: 0 ANSI: 6 [55877.167556] sd 0:0:0:0: [sda] 61765632 512-byte logical blocks: (31.6 GB/29.5 GiB) [55877.168161] sd 0:0:0:0: [sda] Write Protect is off [55877.168270] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00 [55877.168736] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [55877.181711] sda: sda1 [55877.183474] sd 0:0:0:0: [sda] Attached SCSI removable disk [55877.617821] EXT4-fs (sda1): warning: mounting fs with errors, running e2fsck is recommended [55877.621488] EXT4-fs (sda1): recovery complete [55877.624519] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [56102.113882] usb 1-2: USB disconnect, device number 6 [56102.113891] usb 1-2.1: USB disconnect, device number 7 [56102.250434] usb 1-2.2: USB disconnect, device number 8 [56102.310463] usb 1-2.4: USB disconnect, device number 9 [56102.410862] Buffer I/O error on dev sda1, logical block 3702784, lost sync page write [56102.411058] JBD2: Error -5 detected when updating journal superblock for sda1-8. [56102.411195] Aborting journal on device sda1-8. [56102.411403] Buffer I/O error on dev sda1, logical block 3702784, lost sync page write [56102.411547] JBD2: Error -5 detected when updating journal superblock for sda1-8. [56102.517570] usb usb1: usb_suspend_both: status 0 [56102.517588] tegra-xusb 3610000.xhci: entering ELPG [56102.520594] tegra-xusb 3610000.xhci: entering ELPG done [56795.033298] tegra-xusb 3610000.xhci: exiting ELPG [56795.037392] tegra-xusb 3610000.xhci: Firmware timestamp: 2020-09-11 16:55:03 UTC, Version: 60.09 release [56795.038018] tegra-xusb 3610000.xhci: exiting ELPG done [56795.265407] usb 1-2: new high-speed USB device number 10 using tegra-xusb [56795.285733] usb 1-2: New USB device found, idVendor=1a40, idProduct=0101 [56795.285741] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [56795.285767] usb 1-2: Product: USB 2.0 Hub [56795.287741] hub 1-2:1.0: USB hub found [56795.287822] hub 1-2:1.0: 4 ports detected [56795.593375] usb 1-2.1: new low-speed USB device number 11 using tegra-xusb [56795.633404] usb 1-2.1: New USB device found, idVendor=03f0, idProduct=034a [56795.633411] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [56795.633415] usb 1-2.1: Product: HP Elite USB Keyboard [56795.633419] usb 1-2.1: Manufacturer: Chicony [56795.643402] input: Chicony HP Elite USB Keyboard as /devices/3610000.xhci/usb1/1-2/1-2.1/1-2.1:1.0/0003:03F0:034A.0007/input/input11 [56795.702269] hid-generic 0003:03F0:034A.0007: input,hidraw0: USB HID v1.10 Keyboard [Chicony HP Elite USB Keyboard] on usb-3610000.xhci-2.1/input0 [56795.711990] input: Chicony HP Elite USB Keyboard as /devices/3610000.xhci/usb1/1-2/1-2.1/1-2.1:1.1/0003:03F0:034A.0008/input/input12 [56795.769957] hid-generic 0003:03F0:034A.0008: input,hidraw1: USB HID v1.10 Device [Chicony HP Elite USB Keyboard] on usb-3610000.xhci-2.1/input1 [56795.869378] usb 1-2.2: new low-speed USB device number 12 using tegra-xusb [56795.893650] usb 1-2.2: New USB device found, idVendor=03f0, idProduct=1041 [56795.893658] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [56795.893685] usb 1-2.2: Product: HP Travel USB Optical Mouse [56795.893688] usb 1-2.2: Manufacturer: PixArt [56795.896472] input: PixArt HP Travel USB Optical Mouse as /devices/3610000.xhci/usb1/1-2/1-2.2/1-2.2:1.0/0003:03F0:1041.0009/input/input13 [56795.897185] hid-generic 0003:03F0:1041.0009: input,hidraw2: USB HID v1.11 Mouse [PixArt HP Travel USB Optical Mouse] on usb-3610000.xhci-2.2/input0 [56795.977379] usb 1-2.4: new high-speed USB device number 13 using tegra-xusb [56795.999700] usb 1-2.4: New USB device found, idVendor=0781, idProduct=cfc5 [56795.999707] usb 1-2.4: New USB device strings: Mfr=3, Product=4, SerialNumber=5 [56795.999710] usb 1-2.4: Product: SDDR-339 [56795.999714] usb 1-2.4: Manufacturer: SanDisk [56795.999717] usb 1-2.4: SerialNumber: 101018009808 [56796.000590] usb-storage 1-2.4:1.0: USB Mass Storage device detected [56796.001081] scsi host0: usb-storage 1-2.4:1.0 [56797.010369] scsi 0:0:0:0: Direct-Access SanDisk SDDR-339 1036 PQ: 0 ANSI: 6 [56797.424204] sd 0:0:0:0: [sda] 61765632 512-byte logical blocks: (31.6 GB/29.5 GiB) [56797.424814] sd 0:0:0:0: [sda] Write Protect is off [56797.424904] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00 [56797.425352] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [56797.432091] sda: sda1 [56797.433914] sd 0:0:0:0: [sda] Attached SCSI removable disk [56797.877755] EXT4-fs (sda1): warning: mounting fs with errors, running e2fsck is recommended [56797.881434] EXT4-fs (sda1): recovery complete [56797.884647] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [57103.697391] EXT4-fs (sda1): error count since last fsck: 10 [57103.697541] EXT4-fs (sda1): initial error at time 1508132758: __ext4_journal_start_sb:62 [57103.697692] EXT4-fs (sda1): last error at time 1508132740: ext4_lookup:1437: inode 1846902 [57687.121781] FAN rising trip_level:1 cur_temp:46300 trip_temps[2]:60000 [58249.361768] FAN rising trip_level:2 cur_temp:60100 trip_temps[3]:68000 [59610.161741] FAN rising trip_level:3 cur_temp:68100 trip_temps[4]:76000 [59779.281770] FAN cooling trip_level:2 cur_temp:60650 trip_temps[3]:68000 [59819.601602] FAN cooling trip_level:1 cur_temp:51950 trip_temps[2]:60000 [59919.281776] FAN cooling trip_level:0 cur_temp:37800 trip_temps[1]:46000