[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.201-tegra (jcl@jcl-ChengMing-3980) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #4 SMP PREEMPT Thu Jul 8 19:55:21 CST 2021 [ 0.000000] Boot CPU: AArch64 Processor [4e0f0040] [ 0.000000] OF: fdt:memory scan node memory, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 2c000000 [ 0.000000] OF: fdt: - ac200000 , 44800000 [ 0.000000] OF: fdt: - 100000000 , 180000000 [ 0.000000] earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '') [ 0.000000] bootconsole [tegra_comb_uart0] enabled [ 0.000000] Found tegra_fbmem: 00800000@a06a0000 [ 0.000000] Found lut_mem: 00002008@a069a000 [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node grid-of-semaphores, compatible id nvidia,gosmem [ 0.000000] cma: Reserved 64 MiB at 0x00000000c2000000 [ 0.000000] On node 0 totalpages: 2031101 [ 0.000000] DMA zone: 7160 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 458237 pages, LIFO batch:31 [ 0.000000] Normal zone: 24576 pages used for memmap [ 0.000000] Normal zone: 1572864 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 24 pages/cpu s57560 r8192 d32552 u98304 [ 0.000000] pcpu-alloc: s57560 r8192 d32552 u98304 alloc=24*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1999365 [ 0.000000] Kernel command line: console=ttyTCU0,115200 video=tegrafb no_console_suspend=1 earlycon=tegra_comb_uart,mmio32,0x0c168000 gpt rootfs.slot_suffix= tegra_fbmem=0x800000@0xa06a0000 lut_mem=0x2008@0xa069a000 usbcore.old_scheme_first=1 tegraid=19.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.4.2 vpr_resize sdhci_tegra.en_boot_part_access=1 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 29188(89%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 7182652K/8124404K available (15294K kernel code, 2944K rwdata, 6636K rodata, 8576K init, 611K bss, 188088K reserved, 753664K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f70000 ( 15296 KB) [ 0.000000] .rodata : 0xffffff8008f70000 - 0xffffff80095f0000 ( 6656 KB) [ 0.000000] .init : 0xffffff80095f0000 - 0xffffff8009e50000 ( 8576 KB) [ 0.000000] .data : 0xffffff8009e50000 - 0xffffff800a130008 ( 2945 KB) [ 0.000000] .bss : 0xffffff800a130008 - 0xffffff800a1c8cbc ( 612 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf08000000 ( 128 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc200000000 ( 8192 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000637] Console: colour dummy device 80x25 [ 0.000648] console [tty0] enabled [ 0.000656] bootconsole [tegra_comb_uart0] disabled [ 0.000669] kmemleak: Kernel memory leak detector disabled [ 0.000688] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.000703] pid_max: default: 32768 minimum: 301 [ 0.001776] Security Framework initialized [ 0.002348] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.002358] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.003966] ftrace: allocating 47228 entries in 185 pages [ 0.397642] sched-energy: Sched-energy-costs installed from DT [ 0.397661] ASID allocator initialised with 65536 entries [ 0.432085] tegra-id: chipid=21917. [ 0.432096] tegra-id: opt_subrevision=1. [ 0.432123] Tegra Revision: A02p SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.432153] DTS File Name: ../arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-all-p3509-0000.dts [ 0.432162] DTB Build time: Aug 3 2021 14:52:54 [ 0.480259] CPU1: Booted secondary processor [4e0f0040] [ 0.512346] CPU2: Booted secondary processor [4e0f0040] [ 0.544468] CPU3: Booted secondary processor [4e0f0040] [ 0.576722] CPU4: Booted secondary processor [4e0f0040] [ 0.608791] CPU5: Booted secondary processor [4e0f0040] [ 0.609064] Brought up 6 CPUs [ 0.609074] SMP: Total of 6 processors activated. [ 0.609083] CPU features: detected feature: Privileged Access Never [ 0.609090] CPU features: detected feature: LSE atomic instructions [ 0.609096] CPU features: detected feature: User Access Override [ 0.609102] CPU features: detected feature: 32-bit EL0 Support [ 0.610608] CPU: All CPU(s) started at EL2 [ 0.610654] alternatives: patching kernel code [ 0.617123] devtmpfs: initialized [ 0.653489] Initilizing CustomIPI irq domain [ 0.653756] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.653771] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.676614] pinctrl core: initialized pinctrl subsystem [ 0.676829] OS set in device tree is not L4T. [ 0.677172] regulator-dummy: no parameters [ 0.677563] Initializing plugin-manager [ 0.677616] Plugin module not found [ 0.677649] Plugin-manager status disabled [ 0.678925] NET: Registered protocol family 16 [ 0.680332] pstore: using zlib compression [ 0.680352] console [pstore-1] enabled [ 0.680357] pstore: Registered ramoops as persistent store backend [ 0.680364] ramoops: attached 0x200000@0xf0800000, ecc: 0/0 [ 0.695569] cpuidle: using governor menu [ 0.697062] bpmp: waiting for handshake [ 0.697070] bpmp: handshake completed [ 0.697084] bpmp: synchronizing channels [ 0.697093] bpmp: channels synchronized [ 0.697098] bpmp: mail init ok [ 0.700161] t19x-arm-smmu 12000000.iommu: found 3 SMMUs and ISO SMMU id is 2 [ 0.700327] t19x-arm-smmu 12000000.iommu: probing hardware configuration... [ 0.700333] t19x-arm-smmu 12000000.iommu: SMMUv2 with: [ 0.700340] t19x-arm-smmu 12000000.iommu: stage 1 translation [ 0.700346] t19x-arm-smmu 12000000.iommu: stage 2 translation [ 0.700351] t19x-arm-smmu 12000000.iommu: nested translation [ 0.700360] t19x-arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80 [ 0.700368] t19x-arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)! [ 0.700374] t19x-arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 0.700381] t19x-arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA [ 0.700390] t19x-arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA [ 0.704552] vdso: 2 pages (1 code @ ffffff8008f77000, 1 data @ ffffff8009e54000) [ 0.704577] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.707144] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.709417] tegra_aon_clk_init: ok [ 0.709428] Registering BPMP clocks... [ 0.709524] tegra_bpmp_clk_init: clock init ok (400 clks) [ 0.710485] Serial: AMBA PL011 UART driver [ 0.710654] tegra_powergate_init: DONE [ 0.710703] DTS File Name: ../arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-all-p3509-0000.dts [ 0.710715] DTB Build time: Aug 3 2021 14:52:54 [ 0.714725] Tegra reboot handler registered. [ 0.723890] iommu: Adding device 14160000.pcie to group 0 [ 0.724671] iommu: Adding device 141a0000.pcie to group 1 [ 0.726193] iommu: Adding device 2490000.ether_qos to group 2 [ 0.726754] iommu: Adding device 3100000.serial to group 3 [ 0.727308] iommu: Adding device 3110000.serial to group 4 [ 0.727755] iommu: Adding device 3140000.serial to group 5 [ 0.728459] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.728926] tegra-pmc: get_secure_pmc_setting: done secure_pmc=0 [ 0.728955] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET [ 0.728965] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L0 [ 0.728976] tegra-pmc: ### PMC reset status reg: 0x0 [ 0.729033] tegra-pmc: PMC Prod config success [ 0.729292] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.729306] tegra-pmc c360000.pmc: IO padctrl driver initialized [ 0.729682] iommu: Adding device 3460000.sdhci to group 6 [ 0.730250] iommu: Adding device 3440000.sdhci to group 7 [ 0.730837] iommu: Adding device 3210000.spi to group 8 [ 0.731285] iommu: Adding device 3230000.spi to group 9 [ 0.731809] iommu: Adding device 3270000.spi to group 10 [ 0.733336] iommu: Adding device 3160000.i2c to group 11 [ 0.733845] iommu: Adding device c240000.i2c to group 12 [ 0.734303] iommu: Adding device 3180000.i2c to group 13 [ 0.734749] iommu: Adding device 3190000.i2c to group 14 [ 0.735429] iommu: Adding device 31b0000.i2c to group 15 [ 0.735880] iommu: Adding device 31c0000.i2c to group 16 [ 0.736381] iommu: Adding device c250000.i2c to group 17 [ 0.736834] iommu: Adding device 31e0000.i2c to group 18 [ 0.737606] iommu: Adding device sound to group 19 [ 0.738282] iommu: Adding device 3510000.hda to group 20 [ 0.738928] iommu: Adding device bc00000.rtcpu to group 21 [ 0.740911] iommu: Adding device 13e10000.host1x to group 22 [ 0.741435] iommu: Adding device 13e10000.host1x:ctx0 to group 23 [ 0.741905] iommu: Adding device 13e10000.host1x:ctx1 to group 24 [ 0.742370] iommu: Adding device 13e10000.host1x:ctx2 to group 25 [ 0.742812] iommu: Adding device 13e10000.host1x:ctx3 to group 26 [ 0.743579] iommu: Adding device 13e10000.host1x:ctx4 to group 27 [ 0.744008] iommu: Adding device 13e10000.host1x:ctx5 to group 28 [ 0.744452] iommu: Adding device 13e10000.host1x:ctx6 to group 29 [ 0.744872] iommu: Adding device 13e10000.host1x:ctx7 to group 30 [ 0.745517] iommu: Adding device 15340000.vic to group 31 [ 0.745965] iommu: Adding device 15380000.nvjpg to group 32 [ 0.746373] iommu: Adding device 15500000.tsec to group 33 [ 0.746720] iommu: Adding device 15100000.tsecb to group 34 [ 0.747074] iommu: Adding device 15480000.nvdec to group 35 [ 0.747455] iommu: Adding device 15140000.nvdec1 to group 36 [ 0.747803] iommu: Adding device 154c0000.nvenc to group 37 [ 0.748158] iommu: Adding device 15a80000.nvenc1 to group 38 [ 0.748695] iommu: Adding device 15880000.nvdla0 to group 39 [ 0.749542] iommu: Adding device 158c0000.nvdla1 to group 40 [ 0.750284] iommu: Adding device 15200000.nvdisplay to group 41 [ 0.750445] platform 15200000.nvdisplay: IOVA linear map 0x00000000a06a0000(800000) [ 0.750458] platform 15200000.nvdisplay: IOVA linear map 0x00000000a069a000(3000) [ 0.754459] platform 15200000.nvdisplay: IOVA linear map 0x00000000c6000000(2a000000) [ 0.754560] t19x-arm-smmu: Adding 15200000.nvdisplay to ISO SMMU client [ 0.755158] iommu: Adding device 15210000.nvdisplay to group 42 [ 0.755218] t19x-arm-smmu: Adding 15210000.nvdisplay to ISO SMMU client [ 0.757943] iommu: Adding device 15c10000.vi to group 43 [ 0.758164] t19x-arm-smmu: Adding 15c10000.vi to ISO SMMU client [ 0.758757] iommu: Adding device 14800000.isp to group 44 [ 0.759949] iommu: Adding device 16000000.pva0 to group 45 [ 0.760649] iommu: Adding device 16800000.pva1 to group 46 [ 0.761124] iommu: Adding device 15810000.se to group 47 [ 0.761910] iommu: Adding device 15820000.se to group 48 [ 0.762289] iommu: Adding device 15830000.se to group 49 [ 0.762625] iommu: Adding device 15840000.se to group 50 [ 0.762971] iommu: Adding device c1a0000.aon to group 51 [ 0.764935] iommu: Adding device d000000.bpmp to group 52 [ 0.765295] bpmp: ping status is 0 [ 0.765422] bpmp d000000.bpmp: firmware tag is e73a758761f0c6d24a1e69a2ac6b5035 [ 0.768834] bpmp d000000.bpmp: probe ok [ 0.771213] tegra-reset 0.bpmp_reset: registered 190 resets. [ 0.771748] iommu: Adding device smmu_test to group 53 [ 0.773078] mc: mapped MMIO address: 0xffffff800a590000 -> 0x2c10000 [ 0.773121] mc: mapped MMIO address: 0xffffff800a5b0000 -> 0x2c20000 [ 0.773146] mc: mapped MMIO address: 0xffffff800a5d0000 -> 0x2c30000 [ 0.773173] mc: mapped MMIO address: 0xffffff800a7b0000 -> 0x2c40000 [ 0.773197] mc: mapped MMIO address: 0xffffff800a7d0000 -> 0x2c50000 [ 0.773222] mc: mapped MMIO address: 0xffffff800b010000 -> 0x2b80000 [ 0.773241] mc: mapped MMIO address: 0xffffff800b030000 -> 0x2b90000 [ 0.773259] mc: mapped MMIO address: 0xffffff800b050000 -> 0x2ba0000 [ 0.773277] mc: mapped MMIO address: 0xffffff800b070000 -> 0x2bb0000 [ 0.773296] mc: mapped MMIO address: 0xffffff800b090000 -> 0x1700000 [ 0.773314] mc: mapped MMIO address: 0xffffff800b0b0000 -> 0x1710000 [ 0.773354] mc: mapped MMIO address: 0xffffff800b0d0000 -> 0x1720000 [ 0.773372] mc: mapped MMIO address: 0xffffff800b0f0000 -> 0x1730000 [ 0.773391] mc: mapped MMIO address: 0xffffff800b110000 -> 0x1740000 [ 0.773411] mc: mapped MMIO address: 0xffffff800b130000 -> 0x1750000 [ 0.773448] mc: mapped MMIO address: 0xffffff800b150000 -> 0x1760000 [ 0.773466] mc: mapped MMIO address: 0xffffff800b170000 -> 0x1770000 [ 0.773566] mc-err: mcerr ops are set to t19x [ 0.780594] iommu: Adding device 2600000.dma to group 54 [ 0.786491] gpio gpiochip0: gpio-line-names specifies 240 line names but there are 224 lines on the chip [ 0.787736] GPIO line 339 (wifi-enable) hogged as output/high [ 0.787783] GPIO line 412 (camera-control-output-low) hogged as output/low [ 0.787829] GPIO line 413 (camera-control-output-low) hogged as output/low [ 0.788182] gpiochip_setup_dev: registered GPIOs 288 to 511 on device: gpiochip0 (tegra-gpio) [ 0.797201] IndicatorLightPin init sucess [ 0.798210] gpio gpiochip1: gpio-line-names specifies 21 line names but there are 40 lines on the chip [ 0.798283] GPIO line 253 (pex-refclk-sel-low) hogged as output/low [ 0.798322] GPIO line 266 (w-disable1) hogged as output/high [ 0.798358] GPIO line 264 (w-disable2) hogged as output/high [ 0.798402] GPIO line 265 (suspend-led-gpio) hogged as output/high [ 0.798735] gpiochip_setup_dev: registered GPIOs 248 to 287 on device: gpiochip1 (tegra-gpio-aon) [ 0.800099] [tegra_gpio_probe:1884] gpio_request IndicatorLightPin fail ret:-16 [ 0.801410] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_83 = 0x10a [ 0.801421] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3 [ 0.801431] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256 [ 0.802482] iommu: Adding device 3550000.xudc to group 55 [ 0.803247] iommu: Adding device 3610000.xhci to group 56 [ 0.805491] arm64_ras arm64_ras: probed [ 0.805906] ras_fhi_enable: FHI 470 enabled on CPU0 [ 0.805958] ras_fhi_enable: FHI 471 enabled on CPU1 [ 0.806034] ras_fhi_enable: FHI 472 enabled on CPU2 [ 0.806099] ras_fhi_enable: FHI 473 enabled on CPU3 [ 0.806167] ras_fhi_enable: FHI 474 enabled on CPU4 [ 0.806245] ras_fhi_enable: FHI 475 enabled on CPU5 [ 0.806428] carmel_ras_enable: RAS enabled on cpu0 [ 0.806604] carmel_ras_enable: RAS enabled on cpu1 [ 0.806797] carmel_ras_enable: RAS enabled on cpu2 [ 0.806983] carmel_ras_enable: RAS enabled on cpu3 [ 0.807187] carmel_ras_enable: RAS enabled on cpu4 [ 0.807366] carmel_ras_enable: RAS enabled on cpu5 [ 0.807437] carmel_ras carmel_ras: probed [ 0.808586] tegra-cbb 2300000.cbb-noc: noc_secure_irq = 479, noc_nonsecure_irq = 478> [ 0.809140] tegra-cbb c600000.aon-noc: noc_secure_irq = 481, noc_nonsecure_irq = 480> [ 0.810118] tegra-cbb d600000.bpmp-noc: noc_secure_irq = 483, noc_nonsecure_irq = 482> [ 0.811038] tegra-cbb be00000.rce-noc: noc_secure_irq = 485, noc_nonsecure_irq = 484> [ 0.812033] tegra-cbb b600000.sce-noc: noc_secure_irq = 487, noc_nonsecure_irq = 486> [ 0.812475] tegra-cbb 14040000.cv-noc: defer probe as CV-NOC not probed yet [ 0.813983] vdd-ac-bat: 5000 mV [ 0.814485] vdd-sdmmc3-sw: 3300 mV [ 0.814945] vdd-1v8-sd: 1800 mV [ 0.815303] vdd-3v3-cvb: 3300 mV [ 0.815655] vdd-1v8-cvb: 1800 mV [ 0.816122] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.816184] vdd-epb-1v0: 1000 mV [ 0.816696] avdd-cam-2v8: 2800 mV [ 0.817088] vdd-fan: 5000 mV [ 0.817434] vdd-hdmi-5v0: 5000 mV [ 0.817764] vdd_sys_en: 1200 mV [ 0.855296] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.860740] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.861100] SCSI subsystem initialized [ 0.861407] libata version 3.00 loaded. [ 0.861636] usbcore: registered new interface driver usbfs [ 0.861686] usbcore: registered new interface driver hub [ 0.861770] usbcore: registered new device driver usb [ 0.873476] tegra-i2c 31e0000.i2c: could not find pctldev for node /host1x/dpaux@155F0000/pinmux@0, deferring probe [ 0.876627] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 0.884825] vdd-1v0: at 1000 mV [ 0.888870] vdd-1v8-hs: at 1800 mV [ 0.892886] vdd-1v8-ls: at 1800 mV [ 0.896906] vdd-1v8-ao: at 1800 mV [ 0.904921] vddio-ddr-1v1: at 1100 mV [ 0.912702] vdd-rtc: at 800 mV [ 0.914012] spmic-ldo1: at 2375 mV [ 0.924779] vdd-ao-3v3: at 3300 mV [ 0.932776] vddio-emmc-3v3: at 3300 mV [ 0.934127] spmic-ldo4: at 1587 mV [ 0.944817] vdd-usb-3v3: at 3300 mV [ 0.950704] vddio-sdmmc1-3v3: at 3300 mV [ 0.954724] vdd-csi-1v2: at 1200 mV [ 0.956261] spmic-ldo8: at 1800 mV [ 0.961339] GPIO line 246 (gpio_default) hogged as output/high [ 0.962773] GPIO line 247 (gpio_default) hogged as output/high [ 0.963126] gpiochip_setup_dev: registered GPIOs 240 to 247 on device: gpiochip2 (max77620-gpio) [ 0.963523] max77620 4-003c: max77620 probe successful [ 0.964433] media: Linux media interface: v0.10 [ 0.964532] Linux video capture interface: v2.00 [ 0.965998] pps_core: LinuxPPS API ver. 1 registered [ 0.966009] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.966033] PTP clock support registered [ 0.966345] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.966594] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.966642] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.969620] trusty trusty: trusty version: Built: 08:40:57 Feb 19 2021 [ 0.969699] trusty trusty: selected api version: 3 (requested 3) [ 0.972132] Advanced Linux Sound Architecture Driver Initialized. [ 0.972684] Bluetooth: Core ver 2.22 [ 0.972734] NET: Registered protocol family 31 [ 0.972739] Bluetooth: HCI device and connection manager initialized [ 0.972751] Bluetooth: HCI socket layer initialized [ 0.972760] Bluetooth: L2CAP socket layer initialized [ 0.972791] Bluetooth: SCO socket layer initialized [ 0.975876] camchar: rtcpu character device driver loaded [ 0.976437] gpio tegra-gpio wake61 for gpio=201(Z:1) [ 0.976540] extcon-gpio-states external-connection:extcon@1: Cable state:0, cable id:0 [ 0.978248] clocksource: Switched to clocksource arch_sys_counter [ 1.030919] VFS: Disk quotas dquot_6.6.0 [ 1.031067] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.031450] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 1.032912] tegra-carveouts tegra-carveouts: assigned reserved memory node grid-of-semaphores [ 1.032962] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000c6000000, size=0x2a000000 [ 1.033235] cma: enabled page replacement for spfn=c6000, epfn=f0000 [ 1.033252] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 1.033264] nvmap: nvmap_select_cache_ops() nvmap cache ops set to scf [ 1.033272] nvmap_page_pool_init: Total RAM pages: 1984079 [ 1.033316] nvmap_page_pool_init: nvmap page pool size: 248009 pages (968 MB) [ 1.033495] nvmap_background_zero_thread: PP zeroing thread starting. [ 1.034044] misc nvmap: created heap vpr base 0x00000000c6000000 size (688128KiB) [ 1.036177] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 1.049595] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type CPU-therm [ 1.049852] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type GPU-therm [ 1.050082] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type AUX-therm [ 1.050346] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type AO-therm [ 1.050556] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 1.051817] la/ptsa driver initialized. [ 1.052142] NET: Registered protocol family 2 [ 1.052926] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 1.053265] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.053882] TCP: Hash tables configured (established 65536 bind 65536) [ 1.053937] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 1.054065] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 1.054494] NET: Registered protocol family 1 [ 1.055209] RPC: Registered named UNIX socket transport module. [ 1.055218] RPC: Registered udp transport module. [ 1.055223] RPC: Registered tcp transport module. [ 1.055228] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.055241] PCI: CLS 0 bytes, default 64 [ 1.055504] Trying to unpack rootfs image as initramfs... [ 1.287148] Freeing initrd memory: 7064K [ 1.307841] random: fast init done [ 1.312270] host1x 13e10000.host1x: initialized [ 1.314749] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.319456] audit: initializing netlink subsys (disabled) [ 1.319510] audit: type=2000 audit(0.940:1): initialized [ 1.320352] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.331242] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.332546] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.333175] 9p: Installing v9fs 9p2000 file system support [ 1.338391] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.338566] io scheduler noop registered [ 1.338824] io scheduler cfq registered (default) [ 1.342470] gic 2a41000.agic-controller: GIC IRQ controller registered [ 1.346283] iommu: Adding device 2993000.adsp to group 57 [ 1.402429] iommu: Adding device aconnect@2a41000:adsp_audio to group 58 [ 1.403477] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 1.415477] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.415972] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.416532] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.416943] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.417403] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.421646] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 1.421955] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 1.424959] tsec 15500000.tsec: initialized [ 1.426943] tsec 15100000.tsecb: initialized [ 1.430821] nvdec 15480000.nvdec: initialized [ 1.434020] nvdec 15140000.nvdec1: initialized [ 1.439951] falcon 15340000.vic: initialized [ 1.442022] falcon 15380000.nvjpg: initialized [ 1.444195] falcon 154c0000.nvenc: initialized [ 1.446390] falcon 15a80000.nvenc1: initialized [ 1.450256] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56) [ 1.451625] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57) [ 1.453046] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58) [ 1.454357] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59) [ 1.455798] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60) [ 1.457237] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61) [ 1.458639] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62) [ 1.459956] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63) [ 1.463512] t194-nvcsi 15a00000.nvcsi: initialized [ 1.469015] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 1.469474] scare-pigeon 14b00000.isp-thi: initialized [ 1.474957] pva 16000000.pva0: initialized [ 1.480556] pva 16800000.pva1: initialized [ 1.485369] nvdla 15880000.nvdla0: initialized [ 1.490005] nvdla 158c0000.nvdla1: initialized [ 1.491260] tegradccommon 15200000.dc_common: host1x channel mapped [ 1.491272] tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated [ 1.491300] tegradccommon 15200000.dc_common: dma mapping done [ 1.492143] tegradc 15200000.nvdisplay: disp0 connected to head0->/host1x/sor1 [ 1.492172] generic_infoframe_type: 0x87 [ 1.492239] tegradc 15200000.nvdisplay: DT parsed successfully [ 1.492273] tegradc 15200000.nvdisplay: Display dc.ffffff800bd10000 registered with id=0 [ 1.495682] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 7088400 KB/s [ 1.495690] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 800000000 Hz [ 1.495695] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 1.495930] tegradc 15200000.nvdisplay: vblank syncpt # 8 for dc 0 [ 1.495939] tegradc 15200000.nvdisplay: vpulse3 syncpt # 9 for dc 0 [ 1.496687] tegradc 15200000.nvdisplay: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 1.503013] tegradc 15200000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board [ 1.503022] tegradc 15200000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 1.506494] tegradc 15200000.nvdisplay: probed [ 1.543943] Console: switching to colour frame buffer device 240x67 [ 1.544081] tegradc 15200000.nvdisplay: fb registered [ 1.544499] gpio tegra-gpio wake63 for gpio=97(M:1) [ 1.545217] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 1.545305] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 1.547591] Parent Clock set for DC plld2 [ 1.611046] tegradc 15200000.nvdisplay: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 1.611801] tegradc 15200000.nvdisplay: hdmi: get RGB quant from REG programmed by BL. [ 1.611817] tegradc 15200000.nvdisplay: hdmi: get YCC quant from REG programmed by BL. [ 1.637477] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 1.637484] Extcon AUX1(HDMI) enable [ 1.638062] tegradc 15210000.nvdisplay: disp1 connected to head1->/host1x/sor [ 1.638093] tegradc 15210000.nvdisplay: parse_dp_settings: No dp-lt-settings node [ 1.638244] tegradc 15210000.nvdisplay: DT parsed successfully [ 1.638313] tegradc 15210000.nvdisplay: Display dc.ffffff800be10000 registered with id=1 [ 1.638559] tegradc 15210000.nvdisplay: vblank syncpt # 11 for dc 1 [ 1.638568] tegradc 15210000.nvdisplay: vpulse3 syncpt # 12 for dc 1 [ 1.647235] tegradc 15210000.nvdisplay: probed [ 1.647650] tegradc 15210000.nvdisplay: fb registered [ 1.650959] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 1.650968] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 1.650985] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 1.650999] tegradc 15210000.nvdisplay: blank - powerdown [ 1.651016] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 1.651024] Extcon DP: HPD disabled [ 1.651028] hpd: hpd_switch 0 [ 1.651033] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 1.651048] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 1.651057] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 1.651353] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=78 [ 1.651362] tegra_cec 3960000.tegra_cec: Unpowergate DISP: 0. [ 1.651592] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 1.651730] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 1.651890] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 1.651896] tegra_cec 3960000.tegra_cec: probed [ 1.661598] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 32 channels [ 1.662326] tegra-fuse-burn 3820000.efuse:efuse-burn: shutdown limit check disabled [ 1.662334] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized [ 1.662671] kfuse 3830000.kfuse: initialized [ 1.668924] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.671936] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 47, base_baud = 0) is a TEGRA_UART [ 1.673143] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 48, base_baud = 0) is a TEGRA_UART [ 1.673930] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 49, base_baud = 0) is a TEGRA_UART [ 1.675403] console [ttyTCU0] enabled [ 1.675942] [drm] Initialized [ 1.689394] brd: module loaded [ 1.695743] loop: module loaded [ 1.695895] tegra_profiler: version: 1.143, samples/io: 48/28 [ 1.696040] tegra_profiler: auth: init [ 1.696822] THERMAL EST: found 3 subdevs [ 1.696830] THERMAL EST num_resources: 0 [ 1.696841] [THERMAL EST subdev 0] [ 1.696848] [THERMAL EST subdev 1] [ 1.696853] [THERMAL EST subdev 2] [ 1.696862] THERMAL EST: Found 2 profiles, default profile is quiet [ 1.697333] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 1.697338] THERMAL EST: thz register success. [ 1.697516] THERMAL EST: end of probe, return err: 0 [ 1.698449] sd: No Scsi addr parsed to reserve index [ 1.698484] hisi_sas: driver version v1.6 [ 1.708618] qspi_mtd spi6.0: s25fs256s SSG 8 0 1000 2000000 [ 1.708627] qspi_mtd spi6.0: s25fs256s (32768 Kbytes) [ 1.708646] qspi_mtd spi6.0: mtd .name = spi6.0, .size = 0x2000000 (32MiB) .erasesize = 0x00010000 (64KiB) .numeraseregions = 0 [ 1.708883] 1 ofpart partitions found on MTD device spi6.0 [ 1.708888] Creating 1 MTD partitions on "spi6.0": [ 1.708896] 0x000000000000-0x000002000000 : "Whole_flash0" [ 1.711461] libphy: Fixed MDIO Bus: probed [ 1.712075] tun: Universal TUN/TAP device driver, 1.6 [ 1.712080] tun: (C) 1999-2004 Max Krasnyansky [ 1.713173] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.713179] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.713219] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.713249] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.713306] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 1.713311] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.713358] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4 [ 1.713362] Copyright(c) 1999 - 2017 Intel Corporation. [ 1.773321] tegradc 15200000.nvdisplay: blank - powerdown [ 1.811400] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 1.811404] Extcon AUX1(HDMI) disable [ 1.837524] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 1.838724] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 1.858747] tegradc 15200000.nvdisplay: unblank [ 1.860397] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 1.860699] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 1.869175] Parent Clock set for DC plld2 [ 1.873715] tegradc 15200000.nvdisplay: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 1.875115] tegradc 15200000.nvdisplay: hdmi: get YCC quant from EDID. [ 1.909564] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 1.909567] Extcon AUX1(HDMI) enable [ 1.925303] tegradc 15200000.nvdisplay: sync windows ret = 246 [ 1.951584] extcon-disp-state external-connection:disp-state: cable 51 state 1 [ 1.951590] Extcon HDMI: HPD enabled [ 1.951627] tegradc 15200000.nvdisplay: hdmi: plugged [ 1.957285] eqos 2490000.ether_qos: failed to read eqos_auto_cal_config_0_reg [ 1.957833] eqos 2490000.ether_qos: Setting local MAC: 48 b0 2d 38 41 67 [ 1.957959] libphy: dwc_phy: probed [ 1.960356] PPP generic driver version 2.4.2 [ 1.960796] PPP BSD Compression module registered [ 1.960805] PPP Deflate Compression module registered [ 1.960824] PPP MPPE Compression module registered [ 1.960831] NET: Registered protocol family 24 [ 1.960896] usbcore: registered new interface driver r8152 [ 1.960934] usbcore: registered new interface driver asix [ 1.960973] usbcore: registered new interface driver ax88179_178a [ 1.961009] usbcore: registered new interface driver cdc_ether [ 1.961038] usbcore: registered new interface driver net1080 [ 1.961066] usbcore: registered new interface driver cdc_subset [ 1.961095] usbcore: registered new interface driver zaurus [ 1.961133] usbcore: registered new interface driver cdc_ncm [ 1.961559] VFIO - User Level meta-driver version: 0.3 [ 1.962837] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.962863] ehci-pci: EHCI PCI platform driver [ 1.962895] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.962907] ohci-pci: OHCI PCI platform driver [ 1.962940] ohci-platform: OHCI generic platform driver [ 1.968048] tegra-xusb 3610000.xhci: USB2 port 0 has OTG_CAP [ 1.970100] tegra-xusb 3610000.xhci: extcon 0: ffffffc1f54c5000 id [ 1.970604] usbcore: registered new interface driver uas [ 1.970647] usbcore: registered new interface driver usb-storage [ 1.970712] usbcore: registered new interface driver usbserial [ 1.971146] usbcore: registered new interface driver option [ 1.971237] usbserial: USB Serial support registered for GSM modem (1-port) [ 1.973184] tegra-xusb 3610000.xhci: Firmware timestamp: 2019-07-24 05:47:34 UTC, Version: 60.06 release [ 1.973216] tegra-xusb 3610000.xhci: xHCI Host Controller [ 1.973236] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 1.973952] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x00050810 [ 1.974011] tegra-xusb 3610000.xhci: irq 465, io mem 0x03610000 [ 1.974297] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.974306] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.974312] usb usb1: Product: xHCI Host Controller [ 1.974319] usb usb1: Manufacturer: Linux 4.9.201-tegra xhci-hcd [ 1.974325] usb usb1: SerialNumber: 3610000.xhci [ 1.974944] hub 1-0:1.0: USB hub found [ 1.974990] hub 1-0:1.0: 4 ports detected [ 1.975643] tegra-xusb 3610000.xhci: xHCI Host Controller [ 1.975655] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 1.975665] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 1.975886] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.975894] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.975930] usb usb2: Product: xHCI Host Controller [ 1.975937] usb usb2: Manufacturer: Linux 4.9.201-tegra xhci-hcd [ 1.975942] usb usb2: SerialNumber: 3610000.xhci [ 1.976117] tegra-xudc-new 3550000.xudc: PMQOS CPU boost enabled [ 1.976200] tegra-xudc-new 3550000.xudc: device count: 1 [ 1.976405] hub 2-0:1.0: USB hub found [ 1.976446] hub 2-0:1.0: 4 ports detected [ 1.977086] tegra-xudc-new 3550000.xudc: vbus state: 0 [ 1.977097] tegra-xudc-new 3550000.xudc: Initialize boost_cpufreq work [ 1.977173] Wake76 for irq=199 [ 1.977179] Wake77 for irq=199 [ 1.977183] Wake78 for irq=199 [ 1.977187] Wake79 for irq=199 [ 1.977191] Wake80 for irq=199 [ 1.977195] Wake81 for irq=199 [ 1.977200] Wake82 for irq=199 [ 1.977248] tegra-xusb 3610000.xhci: Upgrade port 0 to USB3.0 [ 1.977256] tegra-xusb 3610000.xhci: Upgrade port 1 to USB3.0 [ 1.977664] tegra-xudc-new 3550000.xudc: entering ELPG [ 1.977990] tegra-xudc-new 3550000.xudc: entering ELPG done [ 1.978021] mousedev: PS/2 mouse device common for all mice [ 1.978123] usbcore: registered new interface driver xpad [ 2.078815] usb usb2: usb_suspend_both: status 0 [ 2.109275] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 2.110926] Wake73 for irq=42 [ 2.112275] rtc rtc1: alarm rtc device [ 2.112292] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ 2.112324] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.112535] i2c /dev entries driver [ 2.114968] i2c i2c-2: Added multiplexed i2c bus 9 [ 2.115365] i2c i2c-2: Added multiplexed i2c bus 10 [ 2.115373] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 2.115824] imx219 9-0010: tegracam sensor driver:imx219_v2.0.6 [ 2.139329] tegra-i2c 3180000.i2c: no acknowledge from address 0x10 [ 2.139383] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 2.139881] imx219 9-0010: board setup failed [ 2.140119] imx219: probe of 9-0010 failed with error -121 [ 2.140524] imx219 10-0010: tegracam sensor driver:imx219_v2.0.6 [ 2.163755] tegra-i2c 3180000.i2c: no acknowledge from address 0x10 [ 2.163804] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 2.164117] imx219 10-0010: board setup failed [ 2.164328] imx219: probe of 10-0010 failed with error -121 [ 2.165437] max77620-power max20024-power: Event recorder REG_NVERC : 0x40 [ 2.171711] tegra-thermal-throttle bthrot_cdev: cpufreq policy is not ready defer [ 2.172075] FAN dev name: pwm-fan [ 2.172117] FAN:gpio request success. [ 2.172127] FAN: can't find tach_gpio [ 2.172144] pwm_fan_driver pwm-fan: Found 2 profiles, default profile is quiet [ 2.172184] pwm_fan_driver pwm-fan: cap state:4, cap pwm:255 [ 2.172445] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 2.172452] pwm_fan_driver pwm-fan: tach period: 1000 [ 2.173387] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 2.173396] pwm_fan_driver pwm-fan: index 1: pwm=130, rpm=1000, rru=2, rrd=2, state:2 [ 2.173402] pwm_fan_driver pwm-fan: index 2: pwm=160, rpm=2000, rru=1, rrd=1, state:2 [ 2.173409] pwm_fan_driver pwm-fan: index 3: pwm=200, rpm=3000, rru=1, rrd=1, state:2 [ 2.173414] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 2.173420] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 2.173426] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 2.173432] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 2.173441] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 2.173471] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 2.174351] tegra-oc-event d280000.soctherm-oc-event: OC driver initialized [ 2.175307] device-mapper: uevent: version 1.0.3 [ 2.175861] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 2.179101] tegra194_cpufreq_probe: platform driver Initialization: pass [ 2.180138] cpuidle: Initializing cpuidle driver [ 2.181114] sdhci: Secure Digital Host Controller Interface driver [ 2.181119] sdhci: Copyright(c) Pierre Ossman [ 2.181122] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.182798] sdhci-tegra 3460000.sdhci: Client registration for eMC Successful [ 2.184585] CMDQ: cmdq_platfm_init successful [ 2.185132] sdhci-tegra 3440000.sdhci: Got CD GPIO [ 2.187540] sdhci-tegra 3440000.sdhci: Client registration for eMC Successful [ 2.189765] sdhci-tegra 3440000.sdhci: wakeup init done, cdirq 322 [ 2.194426] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 2.195406] tegra-se-nvhost 15810000.se: initialized [ 2.196533] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 2.197176] tegra-se-nvhost 15820000.se: initialized [ 2.198350] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 2.198989] tegra-se-nvhost 15830000.se: initialized [ 2.199672] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 2.200297] tegra-se-nvhost 15840000.se: initialized [ 2.201201] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 2.201429] hidraw: raw HID events driver (C) Jiri Kosina [ 2.202816] usbcore: registered new interface driver usbhid [ 2.202821] usbhid: USB HID core driver [ 2.206992] tegra186-cam-rtcpu bc00000.rtcpu: deferring, 14800000.isp is not probed [ 2.208194] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 2.208670] tegra186-aondbg aondbg: aondbg driver probe() OK [ 2.209268] denver_knobs_init:MTS_VERSION:51035886 [ 2.209425] tegra19x_actmon d230000.actmon: in actmon_register()... [ 2.210162] tegra19x_actmon d230000.actmon: initialization Completed for the device mc_all [ 2.210585] t19x_cache tegra-cache: probed [ 2.214492] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 2.214507] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 2.215172] carmel-pmu-drv carmel-pmu: Registered Carmel PMU [ 2.215623] PLL_AON clock registered [ 2.216795] Clocks initialized successfully [ 2.218093] nvpmodel: initialized successfully [ 2.219246] trusty-virtio trusty:virtio: initializing [ 2.219475] trusty_ipc virtio0: vring0: va(pa) ffffffc1e26a8000(0) qsz 32 notifyid 1 [ 2.219486] trusty_ipc virtio0: vring1: va(pa) ffffffc1e26aa000(0) qsz 32 notifyid 2 [ 2.219615] trusty-virtio trusty:virtio: initializing done [ 2.219815] trusty_ipc virtio0: is online [ 2.220417] tegra-hda 3510000.hda: Override SDO lines to 4 [ 2.220892] usbcore: registered new interface driver snd-usb-audio [ 2.230243] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit with 64 bit addr [ 2.239405] gpio tegra-gpio wake51 for gpio=130(Q:2) [ 2.239485] mmc1: SDHCI controller on 3440000.sdhci [3440000.sdhci] using ADMA 64-bit with 64 bit addr [ 2.240583] input: tegra-hda-xnx HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input0 [ 2.240794] input: tegra-hda-xnx HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input1 [ 2.241051] input: tegra-hda-xnx HDMI/DP,pcm=8 as /devices/3510000.hda/sound/card0/input2 [ 2.241242] input: tegra-hda-xnx HDMI/DP,pcm=9 as /devices/3510000.hda/sound/card0/input3 [ 2.276697] mmc0: mmc_decode_ext_csd: CMDQ supported: depth: 31, cmdq_support: 1 [ 2.289453] mmc0: periodic cache flush enabled [ 2.289465] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 2.289996] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 2.290258] mmcblk0boot0: mmc0:0001 DG4016 partition 1 4.00 MiB [ 2.290487] mmcblk0boot1: mmc0:0001 DG4016 partition 2 4.00 MiB [ 2.293652] OPE platform probe [ 2.293760] OPE platform probe successful [ 2.294890] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB [ 2.302263] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 [ 2.306240] usb 1-3: new high-speed USB device number 2 using tegra-xusb [ 2.330682] usb 1-3: New USB device found, idVendor=1a40, idProduct=0101 [ 2.330689] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.330694] usb 1-3: Product: USB 2.0 Hub [ 2.331491] hub 1-3:1.0: USB hub found [ 2.331558] hub 1-3:1.0: 4 ports detected [ 2.363011] tegra-asoc: sound: ADMAIF1 <-2789-1-test> ADMAIF1 mapping ok [ 2.363153] tegra-asoc: sound: ADMAIF2 <-2789-1-test> ADMAIF2 mapping ok [ 2.363263] tegra-asoc: sound: ADMAIF3 <-2789-1-test> ADMAIF3 mapping ok [ 2.363370] tegra-asoc: sound: ADMAIF4 <-2789-1-test> ADMAIF4 mapping ok [ 2.363474] tegra-asoc: sound: ADMAIF5 <-2789-1-test> ADMAIF5 mapping ok [ 2.363583] tegra-asoc: sound: ADMAIF6 <-2789-1-test> ADMAIF6 mapping ok [ 2.363697] tegra-asoc: sound: ADMAIF7 <-2789-1-test> ADMAIF7 mapping ok [ 2.363807] tegra-asoc: sound: ADMAIF8 <-2789-1-test> ADMAIF8 mapping ok [ 2.363932] tegra-asoc: sound: ADMAIF9 <-2789-1-test> ADMAIF9 mapping ok [ 2.364055] tegra-asoc: sound: ADMAIF10 <-2789-1-test> ADMAIF10 mapping ok [ 2.364175] tegra-asoc: sound: ADMAIF11 <-2789-1-test> ADMAIF11 mapping ok [ 2.364316] tegra-asoc: sound: ADMAIF12 <-2789-1-test> ADMAIF12 mapping ok [ 2.364440] tegra-asoc: sound: ADMAIF13 <-2789-1-test> ADMAIF13 mapping ok [ 2.364565] tegra-asoc: sound: ADMAIF14 <-2789-1-test> ADMAIF14 mapping ok [ 2.364675] tegra-asoc: sound: ADMAIF15 <-2789-1-test> ADMAIF15 mapping ok [ 2.364781] tegra-asoc: sound: ADMAIF16 <-2789-1-test> ADMAIF16 mapping ok [ 2.364870] tegra-asoc: sound: ADMAIF17 <-2789-1-test> ADMAIF17 mapping ok [ 2.364956] tegra-asoc: sound: ADMAIF18 <-2789-1-test> ADMAIF18 mapping ok [ 2.365043] tegra-asoc: sound: ADMAIF19 <-2789-1-test> ADMAIF19 mapping ok [ 2.365147] tegra-asoc: sound: ADMAIF20 <-2789-1-test> ADMAIF20 mapping ok [ 2.394414] u32 classifier [ 2.394420] Actions configured [ 2.394521] Initializing XFRM netlink socket [ 2.395143] NET: Registered protocol family 10 [ 2.395933] NET: Registered protocol family 17 [ 2.395948] NET: Registered protocol family 15 [ 2.396025] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 2.396147] Bluetooth: RFCOMM socket layer initialized [ 2.396170] Bluetooth: RFCOMM ver 1.11 [ 2.396180] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.396187] Bluetooth: HIDP socket layer initialized [ 2.396205] 9pnet: Installing 9P2000 support [ 2.396250] Key type dns_resolver registered [ 2.396567] Registered cp15_barrier emulation handler [ 2.396587] Registered setend emulation handler [ 2.398220] registered taskstats version 1 [ 2.398742] tegra-pcie-dw 14160000.pcie: Setting init speed to max speed [ 2.399986] OF: PCI: host bridge /pcie@14160000 ranges: [ 2.400012] OF: PCI: IO 0x36100000..0x361fffff -> 0x36100000 [ 2.400022] OF: PCI: MEM 0x1740000000..0x17ffffffff -> 0x40000000 [ 2.400027] OF: PCI: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 2.618230] usb 1-3.3: new high-speed USB device number 3 using tegra-xusb [ 2.640984] usb 1-3.3: New USB device found, idVendor=05e3, idProduct=0610 [ 2.640991] usb 1-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.640996] usb 1-3.3: Product: USB2.0 Hub [ 2.641000] usb 1-3.3: Manufacturer: GenesysLogic [ 2.641835] hub 1-3.3:1.0: USB hub found [ 2.642134] hub 1-3.3:1.0: 4 ports detected [ 2.682262] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 2.746803] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 2.746810] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 2.913669] tegra-pcie-dw 14160000.pcie: link is down [ 2.913843] tegra-pcie-dw 14160000.pcie: PCI host bridge to bus 0004:00 [ 2.913852] pci_bus 0004:00: root bus resource [bus 00-ff] [ 2.913860] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 2.913868] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 2.913894] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 2.913923] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 2.914089] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 2.914346] iommu: Adding device 0004:00:00.0 to group 59 [ 2.914679] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 2.914721] pci 0004:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 2.914987] pcieport 0004:00:00.0: Signaling PME through PCIe PME interrupt [ 2.914994] pcie_pme 0004:00:00.0:pcie001: service driver pcie_pme loaded [ 2.915091] aer 0004:00:00.0:pcie002: service driver aer loaded [ 2.915270] pcie_pme 0004:00:00.0:pcie001: unloading service driver pcie_pme [ 2.915369] aer 0004:00:00.0:pcie002: unloading service driver aer [ 2.915487] pci_bus 0004:01: busn_res: [bus 01-ff] is released [ 2.915598] iommu: Removing device 0004:00:00.0 from group 59 [ 2.915661] pci_bus 0004:00: busn_res: [bus 00-ff] is released [ 2.917378] tegra-pcie-dw 14160000.pcie: PCIe link is not up...! [ 2.918273] tegra-pcie-dw 141a0000.pcie: Setting init speed to max speed [ 2.919453] OF: PCI: host bridge /pcie@141a0000 ranges: [ 2.919473] OF: PCI: IO 0x3a100000..0x3a1fffff -> 0x3a100000 [ 2.919482] OF: PCI: MEM 0x1f40000000..0x1fffffffff -> 0x40000000 [ 2.919488] OF: PCI: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 2.930235] usb 1-3.3.2: new low-speed USB device number 4 using tegra-xusb [ 2.954355] usb 1-3.3.2: New USB device found, idVendor=04ca, idProduct=0061 [ 2.954361] usb 1-3.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.954365] usb 1-3.3.2: Product: USB Optical Mouse [ 2.954369] usb 1-3.3.2: Manufacturer: PixArt [ 2.957072] input: PixArt USB Optical Mouse as /devices/3610000.xhci/usb1/1-3/1-3.3/1-3.3.2/1-3.3.2:1.0/0003:04CA:0061.0001/input/input4 [ 2.957398] hid-generic 0003:04CA:0061.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-3610000.xhci-3.3.2/input0 [ 3.038251] usb 1-3.3.3: new low-speed USB device number 5 using tegra-xusb [ 3.064876] usb 1-3.3.3: New USB device found, idVendor=413c, idProduct=2113 [ 3.064885] usb 1-3.3.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 3.064889] usb 1-3.3.3: Product: Dell KB216 Wired Keyboard [ 3.069179] input: Dell KB216 Wired Keyboard as /devices/3610000.xhci/usb1/1-3/1-3.3/1-3.3.3/1-3.3.3:1.0/0003:413C:2113.0002/input/input5 [ 3.127041] hid-generic 0003:413C:2113.0002: input,hidraw1: USB HID v1.11 Keyboard [Dell KB216 Wired Keyboard] on usb-3610000.xhci-3.3.3/input0 [ 3.132020] input: Dell KB216 Wired Keyboard as /devices/3610000.xhci/usb1/1-3/1-3.3/1-3.3.3/1-3.3.3:1.1/0003:413C:2113.0003/input/input6 [ 3.190398] hid-generic 0003:413C:2113.0003: input,hidraw2: USB HID v1.11 Device [Dell KB216 Wired Keyboard] on usb-3610000.xhci-3.3.3/input1 [ 3.270217] usb 1-3.3.4: new high-speed USB device number 6 using tegra-xusb [ 3.433898] tegra-pcie-dw 141a0000.pcie: link is down [ 3.434006] tegra-pcie-dw 141a0000.pcie: PCI host bridge to bus 0005:00 [ 3.434013] pci_bus 0005:00: root bus resource [bus 00-ff] [ 3.434020] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 3.434026] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 3.434030] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 3.434056] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 3.434217] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 3.434453] iommu: Adding device 0005:00:00.0 to group 59 [ 3.434678] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 3.434720] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 3.434919] pcieport 0005:00:00.0: Signaling PME through PCIe PME interrupt [ 3.434926] pcie_pme 0005:00:00.0:pcie001: service driver pcie_pme loaded [ 3.435008] aer 0005:00:00.0:pcie002: service driver aer loaded [ 3.435150] pcie_pme 0005:00:00.0:pcie001: unloading service driver pcie_pme [ 3.435199] aer 0005:00:00.0:pcie002: unloading service driver aer [ 3.435282] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 3.435351] iommu: Removing device 0005:00:00.0 from group 59 [ 3.435376] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 3.437099] tegra-pcie-dw 141a0000.pcie: PCIe link is not up...! [ 3.448713] tegra-cbb 14040000.cv-noc: noc_secure_irq = 91, noc_nonsecure_irq = 90> [ 3.456116] tegra194-isp5 14800000.isp: initialized [ 3.463311] tegra194-vi5 15c10000.vi: using default number of vi channels, 36 [ 3.469473] tegra194-vi5 15c10000.vi: initialized [ 3.474259] tegra194-vi5 15c10000.vi: subdev 15a00000.nvcsi--2 bound [ 3.474324] tegra194-vi5 15c10000.vi: subdev 15a00000.nvcsi--1 bound [ 3.474533] tegra-thermal-throttle bthrot_cdev: clk:cpu max:1907200000, min:115200000 steps:24 [ 3.479401] tegra-thermal-throttle bthrot_cdev: clk:gpu max:1109250000, min:114750000 steps:10 [ 3.479421] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced clk:0:cpu off:0 slope-adj:200 [ 3.479426] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced clk:1:gpu off:0 slope-adj:400 [ 3.479490] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced max_state:48 cutoff:0 [ 3.479525] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced clk:0:cpu off:0 slope-adj:400 [ 3.479529] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced clk:1:gpu off:0 slope-adj:400 [ 3.483685] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced max_state:40 cutoff:1 [ 3.483733] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced clk:0:cpu off:0 slope-adj:200 [ 3.483738] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced clk:1:gpu off:365500000 slope-adj:300 [ 3.484177] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced max_state:48 cutoff:0 [ 3.484212] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced clk:0:cpu off:38400000 slope-adj:10 [ 3.484217] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced clk:1:gpu off:25500000 slope-adj:10 [ 3.484660] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced max_state:2 cutoff:0 [ 3.484696] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced clk:0:cpu off:0 slope-adj:400 [ 3.484701] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced clk:1:gpu off:0 slope-adj:400 [ 3.485058] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced max_state:40 cutoff:1 [ 3.485789] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 3.508707] usb 1-3.3.4: New USB device found, idVendor=046d, idProduct=0825 [ 3.508714] usb 1-3.3.4: New USB device strings: Mfr=0, Product=0, SerialNumber=2 [ 3.508719] usb 1-3.3.4: SerialNumber: F546EDC0 [ 3.570855] tegra-ivc ivc-bc00000.rtcpu: region 0: iova=0xbfee0000-0xbfefffff size=131072 [ 3.571186] tegra-ivc ivc-bc00000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 3.571394] tegra-ivc ivc-bc00000.rtcpu:dbg@1: dbg: ver=0 grp=1 RX[1x384]=0x1900-0x1b00 TX[1x384]=0x1b00-0x1d00 [ 3.571580] tegra-ivc ivc-bc00000.rtcpu:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d00-0x3d80 TX[1x8192]=0x3d80-0x5e00 [ 3.571938] tegra-ivc ivc-bc00000.rtcpu:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e00-0xae80 TX[64x320]=0xae80-0xff00 [ 3.571991] tegra-ivc ivc-bc00000.rtcpu:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff00-0x17f80 TX[512x64]=0x17f80-0x20000 [ 3.572188] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (66) [ 3.572192] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 3.573148] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=5 sha1=cf2bef3ad10e437272857b76308abef8ffb80bda [ 3.573553] Wake83 for irq=211 [ 3.573619] gpio tegra-gpio wake67 for gpio=48(G:0) [ 3.573689] gpio tegra-gpio-aon wake29 for gpio=36(EE:4) [ 3.573837] input: gpio-keys as /devices/gpio-keys/input/input7 [ 3.607296] tegra_rtc c2a0000.rtc: setting system clock to 2000-01-01 01:00:21 UTC (946688421) [ 3.607810] mmcblk mmc0:0001: Card claimed for testing. [ 3.649169] bpmp: mounted debugfs mirror [ 3.655049] ALSA device list: [ 3.655056] #0: tegra-hda-xnx at 0x3518000 irq 65 [ 3.655059] #1: jetson-xaviernx-ape [ 3.656618] Freeing unused kernel memory: 8576K [ 3.695371] Root device found: mmcblk0p1 [ 3.697140] Found dev node: /dev/mmcblk0p1 [ 3.783088] EXT4-fs (mmcblk0p1): 2 orphan inodes deleted [ 3.783109] EXT4-fs (mmcblk0p1): recovery complete [ 3.788206] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.791329] Rootfs mounted over mmcblk0p1 [ 3.817419] Switching from initrd to actual rootfs [ 3.922037] systemd[1]: System time before build time, advancing clock. [ 3.943862] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.947558] cgroup: cgroup2: unknown option "nsdelegate" [ 3.954351] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 3.954961] systemd[1]: Detected architecture arm64. [ 3.962157] systemd[1]: Set hostname to . [ 4.049980] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 4.049994] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 4.195980] random: systemd: uninitialized urandom read (16 bytes read) [ 4.196022] systemd[1]: Reached target Swap. [ 4.196219] random: systemd: uninitialized urandom read (16 bytes read) [ 4.196243] systemd[1]: Reached target User and Group Name Lookups. [ 4.196278] random: systemd: uninitialized urandom read (16 bytes read) [ 4.199358] systemd[1]: Created slice User and Session Slice. [ 4.200583] systemd[1]: Created slice System Slice. [ 4.201214] systemd[1]: Listening on Journal Socket. [ 4.249965] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 4.303886] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:291 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 4.316788] cpu-throttle-alert cooling device registered. [ 4.317135] gpu-throttle-alert cooling device registered. [ 4.317394] aux-throttle-alert cooling device registered. [ 4.596735] systemd-journald[2351]: Received request to flush runtime journal from PID 1 [ 4.926244] usb 1-3.3.4: set resolution quirk: cval->res = 384 [ 5.392407] using random self ethernet address [ 5.392888] using random host ethernet address [ 5.426701] random: crng init done [ 5.426856] random: 7 urandom warning(s) missed due to ratelimiting [ 5.947670] Mass Storage Function, version: 2009/09/11 [ 5.947681] LUN: removable file: (no medium) [ 5.957777] using random self ethernet address [ 5.959542] using random host ethernet address [ 6.002661] rndis0: HOST MAC 8e:f8:b3:4c:e6:74 [ 6.002962] rndis0: MAC 8e:f8:b3:4c:e6:75 [ 6.006854] usb0: HOST MAC 8e:f8:b3:4c:e6:76 [ 6.006891] usb0: MAC 8e:f8:b3:4c:e6:77 [ 6.006914] tegra-xudc-new 3550000.xudc: exiting ELPG [ 6.007581] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 6.007601] tegra-xudc-new 3550000.xudc: ep 0 (type: 0, dir: out) enabled [ 6.007638] tegra-xudc-new 3550000.xudc: entering ELPG [ 6.007887] tegra-xudc-new 3550000.xudc: entering ELPG done [ 6.007900] tegra-xudc-new 3550000.xudc: exiting ELPG [ 6.008345] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 6.008371] tegra-xudc-new 3550000.xudc: entering ELPG [ 6.009792] tegra-xudc-new 3550000.xudc: entering ELPG done [ 6.017362] l4tbr0: port 1(rndis0) entered blocking state [ 6.017369] l4tbr0: port 1(rndis0) entered disabled state [ 6.017544] device rndis0 entered promiscuous mode [ 6.024561] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 6.033179] l4tbr0: port 2(usb0) entered blocking state [ 6.033188] l4tbr0: port 2(usb0) entered disabled state [ 6.037630] device usb0 entered promiscuous mode [ 6.044318] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 6.360165] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6.383428] uvcvideo: Found UVC 1.00 device (046d:0825) [ 6.414136] uvcvideo 1-3.3.4:1.0: Entity type for entity Extension 4 was not initialized! [ 6.414396] uvcvideo 1-3.3.4:1.0: Entity type for entity Extension 6 was not initialized! [ 6.414592] uvcvideo 1-3.3.4:1.0: Entity type for entity Extension 7 was not initialized! [ 6.414784] uvcvideo 1-3.3.4:1.0: Entity type for entity Processing 2 was not initialized! [ 6.415001] uvcvideo 1-3.3.4:1.0: Entity type for entity Extension 3 was not initialized! [ 6.415205] uvcvideo 1-3.3.4:1.0: Entity type for entity Camera 1 was not initialized! [ 6.428737] input: UVC Camera (046d:0825) as /devices/3610000.xhci/usb1/1-3/1-3.3/1-3.3.4/1-3.3.4:1.0/input/input8 [ 6.436179] usbcore: registered new interface driver uvcvideo [ 6.436187] USB Video Class driver (1.1.1) [ 6.478819] ras_fhi_disable: FHI 474 disabled [ 6.480142] CPU4: shutdown [ 6.480290] psci: CPU4 killed. [ 6.547899] ras_fhi_disable: FHI 475 disabled [ 6.554000] CPU5: shutdown [ 6.570245] psci: Retrying again to check for CPU kill [ 6.570266] psci: CPU5 killed. [ 6.571862] nvgpu: 17000000.gv11b tpc_pg_mask_store:843 [INFO] no value change, same mask already set [ 6.678665] gpio tegra-gpio wake20 for gpio=52(G:4) [ 6.691063] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6.796475] zram: Added device: zram0 [ 6.796905] zram: Added device: zram1 [ 6.798475] zram: Added device: zram2 [ 6.800038] zram: Added device: zram3 [ 6.828123] zram0: detected capacity change from 0 to 1017851904 [ 6.876681] Adding 993992k swap on /dev/zram0. Priority:5 extents:1 across:993992k SS [ 6.879732] zram1: detected capacity change from 0 to 1017851904 [ 6.902100] Adding 993992k swap on /dev/zram1. Priority:5 extents:1 across:993992k SS [ 6.908379] zram2: detected capacity change from 0 to 1017851904 [ 6.927887] Adding 993992k swap on /dev/zram2. Priority:5 extents:1 across:993992k SS [ 6.932676] zram3: detected capacity change from 0 to 1017851904 [ 6.963858] Adding 993992k swap on /dev/zram3. Priority:5 extents:1 across:993992k SS [ 7.946940] tegradc 15200000.nvdisplay: unblank [ 7.946952] tegradc 15210000.nvdisplay: blank - powerdown [ 8.659852] fuse init (API version 7.26) [ 10.194259] usb 1-3.3.4: usb_suspend_both: status 0 [ 10.546483] usb 1-3.3.4: reset high-speed USB device number 6 using tegra-xusb [ 12.596320] eqos 2490000.ether_qos eth0: Link is Up - 100Mbps/Full - flow control off [ 12.596949] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 13.169578] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 13.169593] Bluetooth: BNEP socket layer initialized [ 20.334294] usb 1-3.3.4: usb_suspend_both: status 0 [ 28.846113] tegradc 15200000.nvdisplay: blank - powerdown [ 28.908807] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 28.908812] Extcon AUX1(HDMI) disable [ 28.939174] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 28.940531] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 28.941236] tegradc 15210000.nvdisplay: blank - powerdown [ 29.114374] tegradc 15200000.nvdisplay: blank - powerdown [ 29.114391] tegradc 15200000.nvdisplay: unblank [ 29.115287] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 29.119205] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 29.128998] Parent Clock set for DC plld2 [ 29.136086] tegradc 15200000.nvdisplay: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 29.137448] tegradc 15200000.nvdisplay: hdmi: get YCC quant from EDID. [ 29.174366] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 29.174369] Extcon AUX1(HDMI) enable [ 29.178137] tegradc 15200000.nvdisplay: unblank [ 29.178150] tegradc 15210000.nvdisplay: blank - powerdown [ 32.478452] usb 1-3.3.4: reset high-speed USB device number 6 using tegra-xusb [ 32.622424] tegradc 15200000.nvdisplay: unblank [ 32.622436] tegradc 15210000.nvdisplay: blank - powerdown [ 34.138354] vdd-1v8-sd: disabling [ 34.138362] vdd-1v8-cvb: disabling [ 34.138365] vdd-epb-1v0: disabling [ 34.138368] avdd-cam-2v8: disabling [ 34.138372] vdd-fan: disabling [ 34.138375] vdd_sys_en: disabling [ 35.290530] FAN rising trip_level:1 cur_temp:46300 trip_temps[2]:60000 [ 42.354265] usb 1-3.3.4: usb_suspend_both: status 0 [ 382.487339] FAN rising trip_level:2 cur_temp:60050 trip_temps[3]:68000 [ 507.015983] tegradc 15200000.nvdisplay: blank - powerdown [ 507.071596] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 507.071603] Extcon AUX1(HDMI) disable [ 507.094596] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 507.095106] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd