[ 243.079998] tegradc tegradc.1: nominal-pclk:83764800 parent:83763541 div:1.0 pclk:83763541 82927152~91303632 [ 243.081348] tegradc tegradc.1: hdmi: pclk:83764K, set prod-setting:prod_c_hdmi_75m_150m [ 244.808701] wl_android_wifi_off in [ 244.813890] tegra_sysfs_off [ 244.819217] tegra_sysfs_rf_test_disable [ 244.825830] dhd_wlfc_deinit():3437, maintain HOST RXRERODER flag in tvl [ 244.834992] dhdsdio_isr : bus is down. we have nothing to do [ 244.842528] sdhci-tegra sdhci-tegra.1: Tuning already done, restoring the best tap value : 48 [ 244.854477] wifi_platform_set_power = 0 [ 245.076961] CFGP2P-ERROR) wl_cfgp2p_del_p2p_disc_if : P2P interface unregistered [ 245.304170] watchdog watchdog0: watchdog did not stop! [ 245.315326] systemd-shutdown[1]: Sending SIGTERM to remaining processes... [ 245.333031] systemd-journald[215]: Received SIGTERM from PID 1 (systemd-shutdow). [ 245.356831] systemd-shutdown[1]: Sending SIGKILL to remaining processes... [ 245.373262] systemd-shutdown[1]: Hardware watchdog 'Tegra Watchdog', version 0 [ 245.382412] systemd-shutdown[1]: Unmounting file systems. [ 245.389387] systemd-shutdown[1]: Remounting '/' read-only with options 'data=ordered'. [ 245.463393] EXT4-fs (mmcblk0p1): re-mounted. Opts: data=ordered [ 245.494079] systemd-shutdown[1]: Remounting '/' read-only with options 'data=ordered'. [ 245.504351] EXT4-fs (mmcblk0p1): re-mounted. Opts: data=ordered [ 245.512062] systemd-shutdown[1]: All filesystems unmounted. [ 245.519556] systemd-shutdown[1]: Deactivating swaps. [ 245.526457] systemd-shutdown[1]: All swaps deactivated. [ 245.532899] systemd-shutdown[1]: Detaching loop devices. [ 245.543409] systemd-shutdown[1]: All loop devices detached. [ 245.550313] systemd-shutdown[1]: Detaching DM devices. [ 245.556903] systemd-shutdown[1]: All DM devices detached. [ 245.567905] systemd-shutdown[1]: Rebooting. [ 245.578521] gk20a 57000000.gpu: shutting down [ 245.584299] gk20a 57000000.gpu: already railgated, shut down complete [ 245.593340] therm-fan-est: shutting down [ 245.705850] late_shutdown started [ 245.710548] tegra-vii2c 546c0000.i2c: Bus is shutdown down.. [ 245.717539] tegra-i2c 7000d100.i2c: Bus is shutdown down.. [ 245.724348] tegra-i2c 7000d000.i2c: Bus is shutdown down.. [ 245.731133] tegra-i2c 7000c700.i2c: Bus is shutdown down.. [ 245.737894] tegra-i2c 7000c500.i2c: Bus is shutdown down.. [ 245.744626] tegra-i2c 7000c400.i2c: Bus is shutdown down.. [ 245.751342] tegra-i2c 7000c000.i2c: Bus is shutdown down.. [ 245.758077] reboot: Restarting system [0000.204] [TegraBoot] (version 00.00.2014.50-mobile-d44d4bf0) [0000.210] Processing in cold boot mode Bootloader 2 [0000.215] A02 Bootrom Patch rev = 63 [0000.218] Power-up reason: software reset [0000.222] No Battery Present [0000.224] RamCode = 0 [0000.227] Platform has Ddr4 type ram [0000.230] max77620 disabling SD1 Remote Sense [0000.234] Setting Ddr voltage to 1125mv [0000.238] Serial Number of Pmic Max77663: 0x1a17af [0000.246] Entering ramdump check [0000.249] Get RamDumpCarveOut = 0xff23f000 [0000.253] RamDumpCarveOut=0xff23f000, RamDumperFlag=0x0 [0000.258] Last reboot was clean, booting normally! [0000.263] Sdram initialization is successful [0000.267] SecureOs Carveout Base=0xff800000 Size=0x00800000 [0000.272] GSC1 Carveout Base=0xff700000 Size=0x00100000 [0000.277] GSC2 Carveout Base=0xff600000 Size=0x00100000 [0000.282] GSC3 Carveout Base=0xff500000 Size=0x00100000 [0000.288] GSC4 Carveout Base=0xff400000 Size=0x00100000 [0000.293] GSC5 Carveout Base=0xff300000 Size=0x00100000 [0000.298] BpmpFw Carveout Base=0xff2c0000 Size=0x00040000 [0000.303] Lp0 Carveout Base=0xff2bf000 Size=0x00001000 [0000.318] RamDump Carveout Base=0xff23f000 Size=0x00080000 [0000.324] Platform-DebugCarveout: 0 [0000.327] Nck Carveout Base=0xff03f000 Size=0x00200000 [0000.332] Non secure mode, and RB not enabled. [0000.382] Using GPT Primary to query partitions [0000.387] Loading Tboot-CPU binary [0000.436] Verifying bootloader in OdmNonSecureSBK mode [0000.446] Bootloader load address is 0xa0000000, entry address is 0xa0000258 [0000.453] Bootloader downloaded successfully. [0000.458] Downloaded Tboot-CPU binary to 0xa0000258 [0000.463] MAX77620_GPIO1 Configured. [0000.466] MAX77620_GPIO5 Configured. [0000.470] CPU power rail is up [0000.472] CPU clock enabled [0000.476] Performing RAM repair [0000.479] Updating A64 Warmreset Address to 0xa00002e9 [0000.507] Bootloader DTB Load Address: 0x83000000 [0000.535] Kernel DTB Load Address: 0x83100000 [0000.540] Loading cboot binary [0000.634] Verifying bootloader in OdmNonSecureSBK mode [0000.673] Bootloader load address is 0x92c00000, entry address is 0x92c00258 [0000.680] Bootloader downloaded successfully. [0000.684] GPT: Partition NOT found ! [0000.687] Find Partition via GPT Failed [0000.691] Find Partition via PT Failed [0000.694] function NvTbootGetBinaryOffsets: 0x1 error [0000.699] Error in NvTbootLoadBinary: 0x1 ! [0000.703] Next binary entry address: 0x92c00258 [0000.708] BoardId: 2180 [0000.713] dram memory type is 3 [0000.716] WB0 init successful [0000.742] Bpmp FW successfully loaded [0000.746] Set NvDecSticky Bits [0000.749] GSC1 address : ff700000 [0000.753] GSC2 address ff63fffc value c0edbbcc [0000.757] GSC2 address : ff600000 [0000.761] GSC3 address : ff500000 [0000.765] GSC4 address : ff400000 [0000.769] GSC5 address : ff300000 [0000.772] GSC MC Settings done [0000.775] TOS plaintext Image length 28752 [0000.779] Monitor size 28752 [0000.782] OS size 0 [0000.785] *** Secure OS image signature not verified *** [0000.790] Loading and Validation of Secure OS Successful [0000.796] NvTbootPackSdramParams: start. [0000.801] NvTbootPackSdramParams: done. [0000.804] Tegraboot started after 184993 us [0000.808] Basic modules init took 311331 us [0000.812] Sec Bootdevice Read Time = 216 ms, Read Size = 9476 KB [0000.818] Sec Bootdevice Write Time = -1940251271 ms, Write Size = -68719477 KB [0000.825] Next stage binary read took 23830 us [0000.830] Carveout took 207240 us [0000.833] CPU initialization took 96754 us [0000.837] Total time taken by TegraBoot 639155 us [0000.841] Starting CPU & Halting co-processor 64NOTICE: BL31: v1.2(release):cc5fd7c NOTICE: BL31: Built : 00:37:02, Jul 20 2017 NOTICE: Trusty image missing. ERROR: Error initializing runtime service trusty_fast [0000.982] RamCode = 0 [0001.003] LPDDR4 Training: Read DT: Number of tables = 10 [0001.008] EMC Training (SRC-freq: 204000; DST-freq: 40800) [0001.013] EMC Training Skipped [0001.016] EMC Training (SRC-freq: 204000; DST-freq: 68000) [0001.021] EMC Training Skipped [0001.024] EMC Training (SRC-freq: 204000; DST-freq: 102000) [0001.029] EMC Training Skipped [0001.032] EMC Training (SRC-freq: 204000; DST-freq: 204000) [0001.037] EMC Training Skipped [0001.040] EMC Training (SRC-freq: 204000; DST-freq: 408000) [0001.046] EMC Training Successful [0001.049] EMC Training (SRC-freq: 204000; DST-freq: 665600) [0001.055] EMC Training Successful [0001.058] EMC Training (SRC-freq: 204000; DST-freq: 800000) [0001.070] EMC Training Successful [0001.073] EMC Training (SRC-freq: 204000; DST-freq: 1065600) [0001.096] EMC Training Successful [0001.099] EMC Training (SRC-freq: 204000; DST-freq: 1331200) [0001.120] EMC Training Successful [0001.123] EMC Training (SRC-freq: 204000; DST-freq: 1600000) [0001.143] EMC Training Successful [0001.146] Switching to 800000 KHz Success [0001.156] RamCode = 0 [0001.160] DT Write: emc-table@40800 succeeded [0001.166] DT Write: emc-table@68000 succeeded [0001.172] DT Write: emc-table@102000 succeeded [0001.178] DT Write: emc-table@204000 succeeded [0001.184] DT Write: emc-table@408000 succeeded [0001.190] DT Write: emc-table@665600 succeeded [0001.196] DT Write: emc-table@800000 succeeded [0001.202] DT Write: emc-table@1065600 succeeded [0001.208] DT Write: emc-table@1331200 succeeded [0001.214] DT Write: emc-table@1600000 succeeded [0001.219] LPDDR4 Training: Write DT: Number of tables = 10 [0001.255] [0001.256] Debug Init done [0001.258] Marked DTB cacheable [0001.261] Bootloader DTB loaded at 0x83000000 [0001.266] Marked DTB cacheable [0001.269] Kernel DTB loaded at 0x83100000 [0001.273] DeviceTree Init done [0001.292] Pinmux applied successfully [0001.298] gicd_base: 0x50041000 [0001.303] gicc_base: 0x50042000 [0001.306] Interrupts Init done [0001.311] Using base:0x60005008 & irq:33 for tick-timer [0001.316] Using base:0x60005000 for delay-timer [0001.321] platform_init_timer: DONE [0001.324] Timer(tick) Init done [0001.330] osc freq = 38400 khz [0001.335] [0001.336] welcome to cboot [0001.339] [0001.340] Cboot Version: 00.00.2014.50-t210-fadd1be5 [0001.345] calling constructors [0001.348] initializing heap [0001.350] initializing threads [0001.353] initializing timers [0001.356] creating bootstrap completion thread [0001.361] top of bootstrap2() [0001.363] CPU: ARM Cortex A57 [0001.366] CPU: MIDR: 0x411FD071, MPIDR: 0x80000000 [0001.371] initializing platform [0001.418] config for ddr50 mode completed [0001.421] sdmmc bdev is already initialized [0001.426] Enable APE clock [0001.428] Un-powergate APE partition [0001.432] of_register: registering tegra_udc to of_hal [0001.437] of_register: registering inv20628-driver to of_hal [0001.442] of_register: registering ads1015-driver to of_hal [0001.448] of_register: registering lp8557-bl-driver to of_hal [0001.454] of_register: registering bq2419x_charger to of_hal [0001.459] of_register: registering cpc to of_hal [0001.464] of_register: registering bq27441_fuel_gauge to of_hal [0001.483] gpio framework initialized [0001.487] of_register: registering tca9539_gpio to of_hal [0001.492] of_register: registering tca9539_gpio to of_hal [0001.497] of_register: registering i2c_bus_driver to of_hal [0001.503] of_register: registering i2c_bus_driver to of_hal [0001.508] of_register: registering i2c_bus_driver to of_hal [0001.514] pmic framework initialized [0001.518] of_register: registering max77620_pmic to of_hal [0001.523] regulator framework initialized [0001.527] of_register: registering tegra_xhci to of_hal [0001.532] initializing target [0001.541] gpio_driver_register: register 'tegra_gpio_driver' driver [0001.553] fixed regulator driver initialized [0001.624] initializing OF layer [0001.627] NCK carveout not present [0001.630] Skipping dts_overrides [0001.635] of_children_init: Ops found for compatible string nvidia,tegra210-xhci [0001.643] of_children_init: Ops found for compatible string nvidia,tegra210-i2c [0001.674] I2C Bus Init done [0001.676] of_children_init: Ops found for compatible string nvidia,tegra210-i2c [0001.691] I2C Bus Init done [0001.694] of_children_init: Ops found for compatible string ti,tca9539 [0001.708] tca9539_init: i2c bus: 2, slave addr: 0xe8 [0001.714] gpio_driver_register: register 'tca9539_gpio_driver' driver [0001.720] of_children_init: Ops found for compatible string ti,tca9539 [0001.734] tca9539_init: i2c bus: 2, slave addr: 0xee [0001.740] gpio_driver_register: register 'tca9539_gpio_driver' driver [0001.746] of_children_init: Ops found for compatible string nvidia,tegra210-i2c [0001.761] I2C Bus Init done [0001.764] of_children_init: Ops found for compatible string nvidia,tegra210-i2c [0001.779] I2C Bus Init done [0001.781] of_children_init: Ops found for compatible string nvidia,tegra210-i2c [0001.796] I2C Bus Init done [0001.799] of_children_init: Ops found for compatible string maxim,max77620 [0001.815] max77620_init using irq 118 [0001.819] register 'maxim,max77620' pmic [0001.824] gpio_driver_register: register 'max77620-gpio' driver [0001.830] of_children_init: Ops found for compatible string nvidia,tegra210-i2c [0001.845] I2C Bus Init done [0001.850] NCK carveout not present [0001.853] shim_invoke: No NCT, Calling dts updates [0001.874] Find /i2c@7000c000's alias i2c0 [0001.878] get eeprom at 1-a2, size 256, type 0 [0001.883] get eeprom at 1-ae, size 256, type 0 [0001.898] Find /i2c@7000c400's alias i2c1 [0001.902] get eeprom at 2-a0, size 256, type 0 [0001.917] Find /i2c@7000c500's alias i2c2 [0001.921] get eeprom at 3-a0, size 256, type 0 [0001.926] get eeprom at 3-ae, size 256, type 0 [0001.937] Find /host1x/i2c@546c0000's alias i2c6 [0001.942] get eeprom at 7-a8, size 256, type 0 [0001.946] pm_ids_update: Updating 1,a2, size 256, type 0 [0001.951] I2C slave not started [0001.954] I2C write failed [0001.957] Writing offset failed [0001.960] eeprom_init: EEPROM read failed [0001.964] pm_ids_update: eeprom init failed [0001.968] pm_ids_update: Updating 1,ae, size 256, type 0 [0001.973] I2C slave not started [0001.976] I2C write failed [0001.979] Writing offset failed [0001.982] eeprom_init: EEPROM read failed [0001.986] pm_ids_update: eeprom init failed [0001.990] pm_ids_update: Updating 2,a0, size 256, type 0 [0001.996] I2C slave not started [0001.999] I2C write failed [0002.001] Writing offset failed [0002.004] eeprom_init: EEPROM read failed [0002.008] pm_ids_update: eeprom init failed [0002.012] pm_ids_update: Updating 3,a0, size 256, type 0 [0002.042] pm_ids_update: The pm board id is 2180-1000-400 [0002.051] Adding plugin-manager/ids/2180-1000-400=/i2c@7000c500:module@0x50 [0002.062] pm_ids_update: pm id update successful [0002.066] pm_ids_update: Updating 3,ae, size 256, type 0 [0002.096] pm_ids_update: The pm board id is 2597-0000-500 [0002.104] Adding plugin-manager/ids/2597-0000-500=/i2c@7000c500:module@0x57 [0002.113] pm_ids_update: pm id update successful [0002.117] pm_ids_update: Updating 7,a8, size 256, type 0 [0002.125] I2C slave not started [0002.128] I2C write failed [0002.130] Writing offset failed [0002.133] eeprom_init: EEPROM read failed [0002.137] pm_ids_update: eeprom init failed [0002.171] updating /chosen/nvidia,wifi-mac node 00:04:4b:65:ca:d4 [0002.180] updating /chosen/nvidia,bluetooth-mac node 00:04:4b:65:ca:d5 [0002.190] updating /chosen/nvidia,ethernet-mac node 00:04:4b:65:ca:d6 [0002.196] Plugin Manager: Parse ODM data 0x00084000 [0002.231] Find /i2c@7000c000's alias i2c0 [0002.235] get eeprom at 1-a2, size 256, type 0 [0002.240] get eeprom at 1-ae, size 256, type 0 [0002.255] Find /i2c@7000c400's alias i2c1 [0002.259] get eeprom at 2-a0, size 256, type 0 [0002.274] Find /i2c@7000c500's alias i2c2 [0002.278] get eeprom at 3-a0, size 256, type 0 [0002.283] get eeprom at 3-ae, size 256, type 0 [0002.294] Find /host1x/i2c@546c0000's alias i2c6 [0002.299] get eeprom at 7-a8, size 256, type 0 [0002.303] pm_ids_update: Updating 1,a2, size 256, type 0 [0002.308] I2C slave not started [0002.311] I2C write failed [0002.314] Writing offset failed [0002.317] eeprom_init: EEPROM read failed [0002.321] pm_ids_update: eeprom init failed [0002.325] pm_ids_update: Updating 1,ae, size 256, type 0 [0002.330] I2C slave not started [0002.334] I2C write failed [0002.336] Writing offset failed [0002.339] eeprom_init: EEPROM read failed [0002.343] pm_ids_update: eeprom init failed [0002.347] pm_ids_update: Updating 2,a0, size 256, type 0 [0002.353] I2C slave not started [0002.356] I2C write failed [0002.358] Writing offset failed [0002.361] eeprom_init: EEPROM read failed [0002.365] pm_ids_update: eeprom init failed [0002.369] pm_ids_update: Updating 3,a0, size 256, type 0 [0002.399] pm_ids_update: The pm board id is 2180-1000-400 [0002.407] Adding plugin-manager/ids/2180-1000-400=/i2c@7000c500:module@0x50 [0002.414] pm_ids_update: pm id update successful [0002.419] pm_ids_update: Updating 3,ae, size 256, type 0 [0002.449] pm_ids_update: The pm board id is 2597-0000-500 [0002.456] Adding plugin-manager/ids/2597-0000-500=/i2c@7000c500:module@0x57 [0002.463] pm_ids_update: pm id update successful [0002.468] pm_ids_update: Updating 7,a8, size 256, type 0 [0002.476] I2C slave not started [0002.478] I2C write failed [0002.481] Writing offset failed [0002.484] eeprom_init: EEPROM read failed [0002.488] pm_ids_update: eeprom init failed [0002.522] Chip UID is 000000016411b8031c00000002058480 [0002.529] shim_cmdline_install: /chosen/bootargs: root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 OS=l4t fbcon=map:0 net.ifnames=0 androidboot.modem=none androidboot.serialno=03228161153400808405 androidboot.security=non-secure [0002.553] Add serial number:03228161153400808405 as DT property [0002.561] calling apps_init() [0002.566] Found 18 GPT partitions in "sdmmc3_user" [0002.570] Proceeding to Cold Boot [0002.573] starting app android_boot_app [0002.577] Device state: unlocked [0002.580] display console init [0002.586] skip-display-init in bootloader [0002.590] set_instance_and_out_type: invalid out_type [0002.595] display_console_init: No display init [0002.605] Gpio keyboard init success [0002.609] bct_init bctinit [0002.611] device_query_partition_size: failed to open partition sdmmc3_user:BMP ! [0002.619] BMP partition read failed! [0002.622] blob_init: blob-partition BMP headDT entry for leds-pwm not found e[0002.637] r read failed [0002.640] load_bmp_blob: BMP blob initialization failed [0002.645] Could not load/initialize BMP blob...ignoring [0002.650] bl_battery_charging: connected to external power supply [0002.661] display_console_ioctl: No display init [0002.666] switch_backlight failed [0002.669] bct_init bctinit [0002.671] device_query_partition_size: failed to open partition sdmmc3_user:MSC ! [0002.679] MSC Partition not found [0002.682] bct_init bctinit [0002.685] bct_init bctinit [0002.688] blob_init: USP partition does not have valid Blob [0002.694] Loading android kernel [0002.698] Default: NOT skip verified boot. [0002.702] Verified boot state = Orange [0002.708] display_console_clear: No display init [0002.712] kernel load address: 0x80080000, size: 503741 bytes [0002.718] ramdisk load address: 0x84100000, size: 0 bytes [0002.724] load kernel from storage [0002.728] decompressor handler not found [0002.738] Successfully loaded kernel and ramdisk images [0002.746] bct_init bctinit [0002.749] device_query_partition_size: failed to open partition sdmmc3_user:BMP ! [0002.756] BMP partition read failed! [0002.760] blob_init: blob-partition BMP header read failed [0002.765] load_bmp_blob: BMP blob initialization failed [0002.770] bmp blob is not loaded and initialized [0002.775] Failed to display boot-logo [0002.779] NCK carveout not present [0002.782] Skipping dts_overrides [0002.785] NCK carveout not present [0002.788] shim_invoke: No NCT, Calling dts updates [0002.810] Find /i2c@7000c000's alias i2c0 [0002.814] get eeprom at 1-a2, size 256, type 0 [0002.818] get eeprom at 1-ae, size 256, type 0 [0002.834] Find /i2c@7000c400's alias i2c1 [0002.838] get eeprom at 2-a0, size 256, type 0 [0002.855] Find /i2c@7000c500's alias i2c2 [0002.858] get eeprom at 3-a0, size 256, type 0 [0002.863] get eeprom at 3-ae, size 256, type 0 [0002.875] Find /host1x/i2c@546c0000's alias i2c6 [0002.879] get eeprom at 7-a8, size 256, type 0 [0002.884] pm_ids_update: Updating 1,a2, size 256, type 0 [0002.889] I2C slave not started [0002.892] I2C write failed [0002.895] Writing offset failed [0002.898] eeprom_init: EEPROM read failed [0002.902] pm_ids_update: eeprom init failed [0002.906] pm_ids_update: Updating 1,ae, size 256, type 0 [0002.911] I2C slave not started [0002.914] I2C write failed [0002.917] Writing offset failed [0002.920] eeprom_init: EEPROM read failed [0002.924] pm_ids_update: eeprom init failed [0002.928] pm_ids_update: Updating 2,a0, size 256, type 0 [0002.933] I2C slave not started [0002.936] I2C write failed [0002.939] Writing offset failed [0002.942] eeprom_init: EEPROM read failed [0002.946] pm_ids_update: eeprom init failed [0002.950] pm_ids_update: Updating 3,a0, size 256, type 0 [0002.980] pm_ids_update: The pm board id is 2180-1000-400 [0002.989] Adding plugin-manager/ids/2180-1000-400=/i2c@7000c500:module@0x50 [0002.999] pm_ids_update: pm id update successful [0003.004] pm_ids_update: Updating 3,ae, size 256, type 0 [0003.034] pm_ids_update: The pm board id is 2597-0000-500 [0003.041] Adding plugin-manager/ids/2597-0000-500=/i2c@7000c500:module@0x57 [0003.050] pm_ids_update: pm id update successful [0003.055] pm_ids_update: Updating 7,a8, size 256, type 0 [0003.062] I2C slave not started [0003.065] I2C write failed [0003.068] Writing offset failed [0003.071] eeprom_init: EEPROM read failed [0003.075] pm_ids_update: eeprom init failed [0003.109] updating /chosen/nvidia,wifi-mac node 00:04:4b:65:ca:d4 [0003.118] updating /chosen/nvidia,bluetooth-mac node 00:04:4b:65:ca:d5 [0003.128] updating /chosen/nvidia,ethernet-mac node 00:04:4b:65:ca:d6 [0003.134] Plugin Manager: Parse ODM data 0x00084000 [0003.155] shim_cmdline_install: /chosen/bootargs: root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 OS=l4t fbcon=map:0 net.ifnames=0 androidboot.modem=none androidboot.serialno=03228161153400808405 androidboot.security=non-secure [0003.179] Add serial number:03228161153400808405 as DT property [0003.188] Updated bpmp info to DTB [0003.194] Updated initrd info to DTB [0003.198] "proc-board" doesn't exist, creating [0003.205] Updated board info to DTB [0003.208] "pmu-board" doesn't exist, creating [0003.216] Updated board info to DTB [0003.219] "display-board" doesn't exist, creating [0003.226] Updated board info to DTB [0003.229] "reset" doesn't exist, creating [0003.234] Updated reset info to DTB [0003.237] display_console_ioctl: No display init [0003.242] display_console_ioctl: No display init [0003.246] display_console_ioctl: No display init [0003.254] display_console_ioctl: No display init [0003.261] Cmdline: root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 OS=l4t fbcon=map:0 net.ifnames=0 androidboot.modem=none androidboot.serialno=03228161153400808405 androidboot.security=non-secure tegraid=21.1.2.0.0 ddr_die=2048M@2048M ddr_die=2048M@4096M section=256M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 debug_uartport=lsport,0 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff2bf000 nvdumper_reserved=0xff23f000 core_edp_mv=1075 core_edp_ma=4000 gpt android.kerneltype=normal androidboot.touch_vendor_id=0 androidboot.touch_panel_id=63 androidboot.touch_feature=0 androidboot.bootloader=00.00.2014.50-t210-fadd1be5 androidboot.verifiedbootstate=orange [0003.334] Updated bootarg info to DTB [0003.341] Updated memory info to DTB [0003.350] set vdd_core voltage to 1075 mv [0003.354] setting 'vdd-core' regulator to 1075000 micro volts [0003.359] nvdumper Carveout: Base = 0xff23f000 and Size = 0x80000 [0003.366] bct_init bctinit [0003.369] Starting Bpmp FW [0003.372] BPMP-FW Carveout: Base = 0xff2c0000 and Size = 0x40000 U-Boot 2016.07-g0ce7ca2 (Jul 20 2017 - 00:37:03 -0700) TEGRA210 Model: NVIDIA P2371-2180 Board: NVIDIA P2371-2180 DRAM: 4 GiB MC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 2  1  0 MMC: no card present switch to partitions #0, OK mmc0(part 0) is current device Scanning mmc 0:1... Found /boot/extlinux/extlinux.conf Retrieving file: /boot/extlinux/extlinux.conf 223 bytes read in 83 ms (2 KiB/s) p2371-2180 eMMC boot options 1: primary kernel Enter choice: 1: primary kernel Retrieving file: /boot/initrd 0 bytes read in 59 ms (0 Bytes/s) Retrieving file: /boot/Image 20984368 bytes read in 527 ms (38 MiB/s) append: root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 OS=l4t fbcon=map:0 net.ifnames=0 androidboot.modem=none androidboot.serialno=03228161153400808405 androidboot.security=non-secure tegraid=21.1.2.0.0 ddr_die=2048M@2048M ddr_die=2048M@4096M section=256M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 debug_uartport=lsport,0 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff2bf000 nvdumper_reserved=0xff23f000 core_edp_mv=1075 core_edp_ma=4000 gpt android.kerneltype=normal androidboot.touch_vendor_id=0 androidboot.touch_panel_id=63 androidboot.touch_feature=0 androidboot.bootloader=00.00.2014.50-t210-fadd1be5 androidboot.verifiedbootstate=orange root=/dev/mmcblk0p1 rw rootwait ## Flattened Device Tree blob at 83100000 Booting using the fdt blob at 0x83100000 reserving fdt memory region: addr=80000000 size=20000 Using Device Tree in place at 0000000083100000, end 00000000831aee90 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.38-tegra (buildbrain@mobile-u64-1576) (gcc version 4.8.5 (GCC) ) #1 SMP PREEMPT Thu Jul 20 00:41:06 PDT 2017 [ 0.000000] Boot CPU: AArch64 Processor [411fd071] [ 0.000000] Reserved memory: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] Reserved memory: initialized node iram-carveout, compatible id nvidia,iram-carveout [ 0.000000] Reserved memory: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 16 MiB at 0x00000000fdc00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] PERCPU: Embedded 17 pages/cpu @ffffffc0ffe40000 s31360 r8192 d30080 u69632 [ 0.000000] CPU features: enabling workaround for ARM erratum 832075 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1027072 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 OS=l4t fbcon=map:0 net.ifnames=0 androidboot.modem=none androidboot.serialno=03228161153400808405 androidboot.security=non-secure tegraid=21.1.2.0.0 ddr_die=2048M@2048M ddr_die=2048M@4096M section=256M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 debug_uartport=lsport,0 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff2bf000 nvdumper_reserved=0xff23f000 core_edp_mv=1075 core_edp_ma=4000 gpt android.kerneltype=normal androidboot.touch_vendor_id=0 androidboot.touch_panel_id=63 androidboot.touch_feature=0 androidboot.bootloader=00.00.2014.50-t210-fadd1be5 androidboot.verifiedbootstate=orange root=/dev/mmcblk0p1 rw rootwait [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Memory: 3372572K/4173824K available (11009K kernel code, 1816K rwdata, 6352K rodata, 1208K init, 644K bss, 96740K reserved, 704512K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000 ( 246 GB) [ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum) [ 0.000000] 0xffffffbdc2000000 - 0xffffffbdc6000000 ( 64 MB actual) [ 0.000000] fixed : 0xffffffbffa7fd000 - 0xffffffbffac00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbffae00000 - 0xffffffbffbe00000 ( 16 MB) [ 0.000000] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc100000000 ( 4096 MB) [ 0.000000] .init : 0xffffffc001175000 - 0xffffffc0012a3000 ( 1208 KB) [ 0.000000] .text : 0xffffffc000080000 - 0xffffffc001174c04 ( 17364 KB) [ 0.000000] .data : 0xffffffc0012bd000 - 0xffffffc001483230 ( 1817 KB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] /interrupt-controller@60004000: 192 interrupts forwarded to /interrupt-controller [ 0.000000] enable_t210_agic_clks:106 ape clocked & reset cleared [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] kmemleak: Kernel memory leak detector disabled [ 0.000000] Architected cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000005] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.001704] Console: colour dummy device 80x25 [ 0.002570] console [tty0] enabled [ 0.002601] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800) [ 0.002638] pid_max: default: 32768 minimum: 301 [ 0.002726] Security Framework initialized [ 0.002747] SELinux: Initializing. [ 0.002859] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.002882] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.003548] Initializing cgroup subsys freezer [ 0.003578] Initializing cgroup subsys debug [ 0.003842] CPU0 ipc=1024 [ 0.003878] CPU1 ipc=1024 [ 0.003910] CPU2 ipc=1024 [ 0.003942] CPU3 ipc=1024 [ 0.004011] ASID allocator initialised with 65536 entries [ 0.026947] tegra-id: chipid=22117. [ 0.026978] tegra-id: opt_subrevision=0. [ 0.027008] Tegra Speedo/IDDQ fuse revision 4 [ 0.027027] Tegra: CPU Speedo ID 7, SoC Speedo ID 0, GPU Speedo ID 2 [ 0.027048] Tegra: CPU Process ID 0, SoC Process ID 1, GPU Process ID 0 [ 0.027069] Tegra: CPU Speedo Value 2111, SoC Speedo Value 2002, GPU Speedo Value 2107 [ 0.027097] Tegra: CPU IDDQ Value 2512, SoC IDDQ Value 2916, GPU IDDQ Value 3580 [ 0.027139] Tegra Revision: A02 SKU: 0x17 CPU Process: 0 SoC Process: 1 [ 0.028536] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.4/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/jetson/kernel-dts/tegra210-jetson-tx1-p2597-2180-a01-devkit.dts [ 0.028585] DTB Build time: Jul 20 2017 00:41:47 [ 0.044787] CPU1: Booted secondary processor [411fd071] [ 0.056756] CPU2: Booted secondary processor [411fd071] [ 0.068757] CPU3: Booted secondary processor [411fd071] [ 0.068843] Brought up 4 CPUs [ 0.068909] SMP: Total of 4 processors activated. [ 0.068932] CPU: All CPU(s) started at EL2 [ 0.068974] alternatives: patching kernel code [ 0.071403] devtmpfs: initialized [ 0.143282] Initilizing CustomIPI irq domain [ 0.143635] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.156791] pinctrl core: initialized pinctrl subsystem [ 0.157020] OS set in device tree is L4T. [ 0.157410] regulator-dummy: no parameters [ 0.157631] Initializing plugin-manager [ 0.157704] Plugin module not found [ 0.158661] node /plugin-manager/fragement@0 match with board >=2180-1000-300 [ 0.159456] node /plugin-manager/fragement@4 match with odm-data l4t [ 0.159582] Removing Prop nvidia,pmc-wakeup from target /bcmdhd_wlan [ 0.160072] Adding domain ape-pd to PM domain mc-clk-pd [ 0.160119] Adding domain adsp-pd to PM domain ape-pd [ 0.165026] NET: Registered protocol family 16 [ 0.181560] console [pstore-1] enabled [ 0.181582] pstore: Registered ramoops as persistent store backend [ 0.181606] ramoops: attached 0x200000@0xb0000000, ecc: 0/0 [ 0.192237] cpuidle: using governor ladder [ 0.204228] cpuidle: using governor menu [ 0.204594] bpmp: mail init ok [ 0.205716] vdso: 2 pages (1 code @ ffffffc0012c5000, 1 data @ ffffffc0012c4000) [ 0.205774] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.208133] atomic_pool_init():526: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.209073] tegra_powergate_init: DONE [ 0.209114] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.4/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/jetson/kernel-dts/tegra210-jetson-tx1-p2597-2180-a01-devkit.dts [ 0.209163] DTB Build time: Jul 20 2017 00:41:47 [ 0.210198] Error: Driver 'tegra-mc' is already registered, aborting... [ 0.211857] platform tegra-carveouts: SMMU isn't ready yet [ 0.212618] platform tegra-carveouts: domain=ffffffc0fa139318 allocates as[0]=ffffffc0fa14c0a8 [ 0.212688] tegra_smmu 70019000.iommu: Loaded Tegra IOMMU driver [ 0.212930] platform smmu_test: domain=ffffffc0fa139618 allocates as[0]=ffffffc0fa14c110 [ 0.213266] platform 70016000.bpmp: domain=ffffffc0fa139918 allocates as[0]=ffffffc0fa14c178 [ 0.213981] bpmp: ping status is 0 [ 0.214089] bpmp 70016000.bpmp: firmware tag is 1e4b302fc0f866f97885165cf8b395ac [ 0.214347] bpmp 70016000.bpmp: probe ok [ 0.215013] mc: mapped MMIO address: 0xffffff800007e000 -> 0x70019000 [ 0.215119] mc: mapped MMIO address: 0xffffff80000b6000 -> 0x7001c000 [ 0.215219] mc: mapped MMIO address: 0xffffff80000dc000 -> 0x7001d000 [ 0.215307] mc-err: Set intmask: 0x23d40 [ 0.227070] GPIO line 58 (wlan-default-input-h2) hogged as input [ 0.227118] GPIO line 65 (wlan-default-input-i1) hogged as input [ 0.227162] GPIO line 56 (wlan-default-output-high-h0) hogged as output/high [ 0.227208] GPIO line 64 (wlan-default-output-high-i0) hogged as output/high [ 0.227252] GPIO line 148 (cam0-rst) hogged as output/low [ 0.227290] GPIO line 151 (cam0-pwdn) hogged as output/low [ 0.227328] GPIO line 149 (cam1-rst) hogged as output/low [ 0.227366] GPIO line 152 (cam1-pwdn) hogged as output/low [ 0.227482] gpiochip_add_data: registered GPIOs 0 to 255 on device: tegra-gpio [ 0.230017] platform 70006000.serial: domain=ffffffc0fa1e6e18 allocates as[0]=ffffffc0fa14c1e0 [ 0.231151] platform sound: domain=ffffffc0fa201718 allocates as[0]=ffffffc0fa14c248 [ 0.233628] platform tegradc.1: domain=ffffffc0fa244918 allocates as[0]=ffffffc0fa14c2b0 [ 0.234254] platform tegradc.1: IOVA linear map 0x00000000c6000000(2a000000) [ 0.237034] platform 57000000.gpu: domain=ffffffc0fa253d18 allocates as[0]=ffffffc0fa14c318 [ 0.237111] platform 57000000.gpu: domain=ffffffc0fa253d18 allocates as[1]=ffffffc0fa14c380 [ 0.237183] platform 57000000.gpu: domain=ffffffc0fa253d18 allocates as[2]=ffffffc0fa14c3e8 [ 0.237251] platform 57000000.gpu: domain=ffffffc0fa253d18 allocates as[3]=ffffffc0fa14c450 [ 0.238016] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.238060] tegra-pmc 7000e400.pmc: scratch reg offset dts data not present [ 0.238085] tegra-pmc: ### PMC reset source: Software reset [ 0.238105] tegra-pmc: ### PMC reset status reg: 0x3 [ 0.238476] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.238509] tegra-pmc: Clear bootloader IO dpd settings [ 0.240344] tegra-pmc 7000e400.pmc: PMC: IO pad audio voltage is 1800000 [ 0.244321] tegra-pmc 7000e400.pmc: PMC: IO pad cam voltage is 1800000 [ 0.248320] tegra-pmc 7000e400.pmc: PMC: IO pad dbg voltage is 1800000 [ 0.252319] tegra-pmc 7000e400.pmc: PMC: IO pad dmic voltage is 1800000 [ 0.252348] tegra-pmc 7000e400.pmc: PMC: IO pad pex-ctrl voltage is 1800000 [ 0.256318] tegra-pmc 7000e400.pmc: PMC: IO pad spi voltage is 1800000 [ 0.260321] tegra-pmc 7000e400.pmc: PMC: IO pad uart voltage is 1800000 [ 0.264319] tegra-pmc 7000e400.pmc: PMC: IO pad audio-hv voltage is 1800000 [ 0.264348] tegra-pmc 7000e400.pmc: PMC: IO pad spi-hv voltage is 1800000 [ 0.268318] tegra-pmc 7000e400.pmc: PMC: IO pad gpio voltage is 1800000 [ 0.272318] tegra-pmc 7000e400.pmc: PMC: IO pad sdmmc3 voltage is 1800000 [ 0.272345] tegra-pmc 7000e400.pmc: IO padctrl driver initialized [ 0.272415] tegra-pmc 7000e400.pmc: PMC: Successfully configure bootrom reset commands [ 0.275554] platform 1003000.pcie-controller: domain=ffffffc0fa25be18 allocates as[0]=ffffffc0fa14c4b8 [ 0.277910] platform sdhci-tegra.3: domain=ffffffc0fa282f18 allocates as[0]=ffffffc0fa14c520 [ 0.278524] platform sdhci-tegra.0: domain=ffffffc0fa289318 allocates as[0]=ffffffc0fa14c588 [ 0.284118] vdd-ac-bat: 5000 mV [ 0.285367] vdd-cpu-fixed: 1000 mV [ 0.289219] irq: no irq domain found for /soctherm@0x700E2000 ! [ 0.289564] irq: no irq domain found for /soctherm@0x700E2000 ! [ 0.313500] ACPI: Interpreter disabled. [ 0.314335] SCSI subsystem initialized [ 0.314624] usbcore: registered new interface driver usbfs [ 0.314695] usbcore: registered new interface driver hub [ 0.314797] usbcore: registered new device driver usb [ 0.318092] gpiochip_add_data: registered GPIOs 496 to 511 on device: tca9539 [ 0.319570] gpiochip_add_data: registered GPIOs 480 to 495 on device: tca9539 [ 0.322706] max77620 4-003c: PMIC Version OTP:0x3C and ES:0x8 [ 0.324366] GPIO line 474 (spmic-default-output-high) hogged as output/high [ 0.324486] gpiochip_add_data: registered GPIOs 472 to 479 on device: max77620-gpio [ 0.328349] vdd-core: 600 <--> 1400 mV at 1075 mV [ 0.332344] vddio-ddr: at 1125 mV [ 0.333084] vdd-pre-reg: 1350 mV [ 0.336222] vdd-1v8: 1800 mV [ 0.340225] avdd-sys: 1200 mV [ 0.344223] vdd-pex: 1050 mV [ 0.344834] vddio-sdmmc1: 1800 <--> 3300 mV at 3300 mV [ 0.345541] vdd-cam-hv: 2800 mV [ 0.348222] vdd-rtc: 850 mV [ 0.348961] avdd-ts-hv: 3300 mV [ 0.349682] vdd-ts: 1800 mV [ 0.352223] vdd-gen-pll-edp: 1050 mV [ 0.356223] vdd-hdmi-dp: 1050 mV [ 0.356854] max77620 4-003c: max77620 probe successful [ 0.358777] media: Linux media interface: v0.10 [ 0.358859] Linux video capture interface: v2.00 [ 0.366540] tegra210-emc 7001b000.memory-controller: validated EMC DFS table [ 0.366871] Advanced Linux Sound Architecture Driver Initialized. [ 0.370431] tegra210_dvfs: no clock found for sdmmc2_ddr [ 0.370486] tegra210_dvfs: no clock found for sdmmc4_ddr [ 0.370586] tegra210_dvfs: no clock found for sdmmc1_ddr [ 0.370631] tegra210_dvfs: no clock found for sdmmc3_ddr [ 0.373625] regulator_get() failed for (dvfs,vdd-cpu), -19 [ 0.373651] tegra_dvfs: Unable to get vdd-cpu rail for step info, defering probe [ 0.376227] vdd-3v3: 3300 mV [ 0.380221] max77620-gpio7: 1050 mV [ 0.380545] lcd-bl-en: 1800 mV [ 0.380855] en-vdd-sd: 3300 mV [ 0.381527] en-vdd-cam: 1800 mV [ 0.384221] vdd-sys-boost: 5000 mV [ 0.384892] vdd-hdmi: 5000 mV [ 0.385151] aux-3v3: 3300 mV [ 0.385388] snsr_pm: 3300 mV [ 0.388224] vdd-disp-3v0: 3000 mV [ 0.388906] vdd-fan: 5000 mV [ 0.389200] usb-vbus1: 5000 mV [ 0.389859] en-vdd-ts-1v8: 1800 mV [ 0.390534] en-vdd-ts-hv-3v3: 3300 mV [ 0.391378] en-vdd-disp-3v3: 3300 mV [ 0.392032] en-mdm-pwr-3v7: 3700 mV [ 0.392896] en-vdd-disp-1v8: 1800 mV [ 0.393552] en-vdd-cam-hv-2v8: 2800 mV [ 0.393841] rtl-5v0: 5000 mV [ 0.394148] en-usb-vbus2: 5000 mV [ 0.394817] en-vdd-cam-1v2: 1200 mV [ 0.395109] en-vdd-vcm-2v8: 2800 mV [ 0.397938] extcon-gpio-states extcon:extcon@1: Cable state 1 [ 0.399293] clocksource: Switched to clocksource arch_sys_counter [ 0.438556] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.438947] dma_declare_coherent_resizable_cma_memory:290: resizable heap=vpr, base=0x00000000c6000000, size=0x2a000000 [ 0.439130] cma: enabled page replacement for spfn=c6000, epfn=f0000 [ 0.439157] dma_declare_coherent_resizable_cma_memory:337: resizable cma heap=vpr create successful [ 0.439188] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 0.439248] tegra-carveouts tegra-carveouts: iram :dma coherent mem declare 0x0000000040001000,258048 [ 0.439313] tegra-carveouts tegra-carveouts: assigned reserved memory node iram-carveout [ 0.439622] misc nvmap: created heap iram base 0x0000000040001000 size (252KiB) [ 0.440345] misc nvmap: created heap vpr base 0x00000000c6000000 size (688128KiB) [ 0.441087] pnp: PnP ACPI: disabled [ 0.452923] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type AO-therm [ 0.454752] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type CPU-therm [ 0.455161] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.455419] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.457040] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type Tdiode_tegra [ 0.457294] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type PMIC-Die [ 0.457526] thermal thermal_zone6: Registering thermal zone thermal_zone6 for type Tboard_tegra [ 0.458725] isomgr_init(): iso emc max clk=1600000KHz [ 0.458749] isomgr_init(): max_iso_bw=11520000KB [ 0.458886] NET: Registered protocol family 2 [ 0.459502] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.459686] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.459958] TCP: Hash tables configured (established 32768 bind 32768) [ 0.460058] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.460124] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.460369] NET: Registered protocol family 1 [ 0.460691] RPC: Registered named UNIX socket transport module. [ 0.460718] RPC: Registered udp transport module. [ 0.460738] RPC: Registered tcp transport module. [ 0.460758] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.461009] Trying to unpack rootfs image as initramfs... [ 0.472199] host1x 50000000.host1x: initialized [ 0.473920] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.477121] futex hash table entries: 1024 (order: 5, 131072 bytes) [ 0.477244] audit: initializing netlink subsys (disabled) [ 0.477301] audit: type=2000 audit(0.467:1): initialized [ 0.489350] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.489845] fuse init (API version 7.23) [ 0.492452] io scheduler noop registered (default) [ 0.492486] io scheduler deadline registered [ 0.492810] io scheduler cfq registered [ 0.498024] tegra21x-padctl-uphy 7009f000.pinctrl: padctl mmio start 0x000000007009f000 end 0x000000007009ffff [ 0.498073] tegra21x-padctl-uphy 7009f000.pinctrl: TEGRA_FUSE_SKU_CALIB_0 0x8168c0e [ 0.498107] tegra21x-padctl-uphy 7009f000.pinctrl: TEGRA_FUSE_USB_CALIB_EXT_0 0x4 [ 0.499586] tegra21x-padctl-uphy 7009f000.pinctrl: UTMI-0 is used by XUSB [ 0.499621] tegra21x-padctl-uphy 7009f000.pinctrl: using UTMI port 0 for otg [ 0.499650] tegra21x-padctl-uphy 7009f000.pinctrl: UTMI-2 is used by XUSB [ 0.499686] tegra21x-padctl-uphy 7009f000.pinctrl: uphy_lane = 5, set usb3_lanes = 0x20 [ 0.499730] tegra21x-padctl-uphy 7009f000.pinctrl: USB3 port 1 maps to USB2 port 2 [ 0.499763] tegra21x-padctl-uphy 7009f000.pinctrl: UTMI-1 is used by XUSB [ 0.499797] tegra21x-padctl-uphy 7009f000.pinctrl: uphy_lane = 6, set usb3_lanes = 0x60 [ 0.499840] tegra21x-padctl-uphy 7009f000.pinctrl: USB3 port 0 maps to USB2 port 1 [ 0.499885] tegra21x-padctl-uphy 7009f000.pinctrl: uphy_lane = 1, set pcie_lanes = 0x2 [ 0.499932] tegra21x-padctl-uphy 7009f000.pinctrl: uphy_lane = 2, set pcie_lanes = 0x6 [ 0.499979] tegra21x-padctl-uphy 7009f000.pinctrl: uphy_lane = 3, set pcie_lanes = 0xe [ 0.500025] tegra21x-padctl-uphy 7009f000.pinctrl: uphy_lane = 4, set pcie_lanes = 0x1e [ 0.500071] tegra21x-padctl-uphy 7009f000.pinctrl: uphy_lane = 0, set pcie_lanes = 0x1f [ 0.500118] tegra21x-padctl-uphy 7009f000.pinctrl: uphy_lane = 7, set sata_lanes = 0x80 [ 0.500565] tegra21x-padctl-uphy 7009f000.pinctrl: mailbox is not ready yet [ 0.501605] tegra-pwm 7000a000.pwm: PWM clk can sleep in ops [ 0.502691] tegra-dfll-pwm 70110000.pwm: DFLL pwm-rate: 12800000 [ 0.503474] Adding domain pcie-pd to PM domain mc-clk-pd [ 0.508131] tegra-pcie 1003000.pcie-controller: 4x1, 1x1 configuration [ 0.508198] tegra-pcie 1003000.pcie-controller: failed to get PHY: -517 [ 0.508224] tegra-pcie 1003000.pcie-controller: failed to get PHYs: -517 [ 0.511781] tsec 54500000.tsec: initialized [ 0.513113] tsec 54100000.tsecb: initialized [ 0.515915] nvdec 54480000.nvdec: initialized [ 0.521974] falcon 54340000.vic: initialized [ 0.523596] falcon 544c0000.nvenc: initialized [ 0.524739] falcon 54380000.nvjpg: initialized [ 0.526744] DC OR NODE connected to /host1x/sor1 [ 0.526840] display board info: id 0xffff, fab 0x0 [ 0.526897] panel_select fail by _node_status [ 0.526955] display board info: id 0xffff, fab 0x0 [ 0.527003] panel_select fail by _node_status [ 0.527185] tegradc tegradc.1: DT parsed successfully [ 0.527243] tegradc tegradc.1: Display dc.ffffff8000980000 registered with id=0 [ 0.527830] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 0.528039] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1020000, vi_iso_bw=750000, max_bw=1020000 [ 0.529420] display board info: id 0xffff, fab 0x0 [ 0.529482] panel_select fail by _node_status [ 0.532948] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 0.534982] tegra-adma 702e2000.adma: Tegra ADMA driver register 10 channels [ 0.536527] tegra-fuse-burn 7000f800.efuse:efuse-burn: Fuse burn driver initialized [ 0.536827] kfuse 7000fc00.kfuse: initialized [ 0.538694] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 0.539722] clk_cbus_round_rate: no gbus parent [ 0.539750] tegra_gpu_edp gpu_edp: unable to get max GPU freq [ 0.540263] tegra-dfll-pwm 70110000.pwm: DFLL_PWM regulator is available now [ 0.540296] vdd-cpu: 708 <--> 1322 mV at 708 mV [ 0.540358] pwm-regulator pwm_regulators:pwm-regulator@0: PWM regulator registration passed [ 0.541452] vdd-gpu: applied init 1000000uV constraint [ 0.541482] vdd-gpu: 710 <--> 1320 mV at 1000 mV [ 0.541539] pwm-regulator pwm_regulators:pwm-regulator@1: PWM regulator registration passed [ 0.541918] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.542059] No Device Node present for smmu client: serial8250 !! [ 0.542087] platform serial8250: No iommus property found in DT node, got swgids from fixup(101004000) [ 0.542123] No Device Node present for smmu client: serial8250 !! [ 0.542147] platform serial8250: No iommus property found in DT node, got swgids from fixup(101004000) [ 0.543230] No Device Node present for smmu client: serial8250 !! [ 0.543261] serial8250 serial8250: No iommus property found in DT node, got swgids from fixup(101004000) [ 0.543356] No Device Node present for smmu client: serial8250 !! [ 0.543383] serial8250 serial8250: No iommus property found in DT node, got swgids from fixup(101004000) [ 0.544037] console [ttyS0] disabled [ 0.544099] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 320, base_baud = 25500000) is a Tegra [ 0.556823] tegradc tegradc.1: probed [ 2.571057] console [ttyS0] enabled [ 2.572419] 70006040.serial: ttyTHS1 at MMIO 0x70006040 (irq = 321, base_baud = 0) is a TEGRA_UART [ 2.572891] 70006200.serial: ttyTHS2 at MMIO 0x70006200 (irq = 322, base_baud = 0) is a TEGRA_UART [ 2.573231] serial-tegra 70006300.serial: RX in PIO mode [ 2.573330] 70006300.serial: ttyTHS3 at MMIO 0x70006300 (irq = 323, base_baud = 0) is a TEGRA_UART [ 2.575690] gk20a 57000000.gpu: platform probe failed [ 2.583328] Console: switching to colour frame buffer device 160x50 [ 2.585824] brd: module loaded [ 2.591454] loop: module loaded [ 2.592084] zram: Added device: zram0 [ 2.592095] Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti [ 2.592306] nct1008_nct72 0-004c: find device tree node, parsing dt [ 2.592313] nct1008_nct72 0-004c: starting parse dt [ 2.592389] nct1008_nct72 0-004c: success parsing dt [ 2.592640] nct1008_nct72 0-004c: success in enabling tmp451 VDD rail [ 2.671432] tmp451: Enabled overheat logging at 102.00C [ 2.671586] nct1008_nct72 0-004c: nct1008_probe: initialized [ 2.694013] tegradc tegradc.1: fb registered [ 2.699816] THERMAL EST: found 2 subdevs [ 2.703841] THERMAL EST num_resources: 0 [ 2.707851] [THERMAL EST subdev 0] [ 2.715261] [THERMAL EST subdev 1] [ 2.722828] tegradc tegradc.1: nominal-pclk:83764800 parent:83763541 div:1.0 pclk:83763541 82927152~91303632 [ 2.722926] thermal thermal_zone7: Registering thermal zone thermal_zone7 for type thermal-fan-est [ 2.722929] THERMAL EST: thz register success. [ 2.723072] THERMAL EST: end of probe, return err: 0 [ 2.723154] tegra_profiler: Branch: Dev [ 2.723157] tegra_profiler: Version: 1.109 [ 2.723160] tegra_profiler: Samples version: 37 [ 2.723162] tegra_profiler: IO version: 21 [ 2.723168] armv8_pmu: imp: 0x41, idcode: 0x1 [ 2.723173] armv8_pmu: [0] arch: AA64 PmuV3 ARM CORTEX-A57, type: 5, ver: 0 [ 2.723177] armv8_pmu: imp: 0x41, idcode: 0x1 [ 2.723181] armv8_pmu: [1] arch: AA64 PmuV3 ARM CORTEX-A57, type: 5, ver: 0 [ 2.723185] armv8_pmu: imp: 0x41, idcode: 0x1 [ 2.723188] armv8_pmu: [2] arch: AA64 PmuV3 ARM CORTEX-A57, type: 5, ver: 0 [ 2.723192] armv8_pmu: imp: 0x41, idcode: 0x1 [ 2.723196] armv8_pmu: [3] arch: AA64 PmuV3 ARM CORTEX-A57, type: 5, ver: 0 [ 2.723433] tegra_profiler: auth: init [ 2.723968] tegra-ahci 70027000.sata: Missing devslp-active state [ 2.724941] Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 2.725471] spi-tegra114 7000d400.spi: Static pin configuration used [ 2.726301] spi-tegra114 7000da00.spi: Static pin configuration used [ 2.727742] tun: Universal TUN/TAP device driver, 1.6 [ 2.727746] tun: (C) 1999-2004 Max Krasnyansky [ 2.728159] PPP generic driver version 2.4.2 [ 2.728332] PPP BSD Compression module registered [ 2.728341] PPP Deflate Compression module registered [ 2.728361] PPP MPPE Compression module registered [ 2.728377] NET: Registered protocol family 24 [ 2.728464] usbcore: registered new interface driver r8152 [ 2.728524] usbcore: registered new interface driver asix [ 2.728570] usbcore: registered new interface driver ax88179_178a [ 2.728622] usbcore: registered new interface driver cdc_ether [ 2.728683] usbcore: registered new interface driver smsc95xx [ 2.728729] usbcore: registered new interface driver net1080 [ 2.728774] usbcore: registered new interface driver cdc_subset [ 2.728819] usbcore: registered new interface driver zaurus [ 2.728899] usbcore: registered new interface driver cdc_ncm [ 2.729038] usbcore: registered new interface driver usb-storage [ 2.729134] usbcore: registered new interface driver usbserial [ 2.729179] usbcore: registered new interface driver ftdi_sio [ 2.729211] usbserial: USB Serial support registered for FTDI USB Serial Device [ 2.729252] usbcore: registered new interface driver option [ 2.729281] usbserial: USB Serial support registered for GSM modem (1-port) [ 2.729321] usbcore: registered new interface driver pl2303 [ 2.729350] usbserial: USB Serial support registered for pl2303 [ 2.730377] tegra-xudc-new 700d0000.xudc: usb2 phy is not available yet [ 2.997269] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc1 [ 3.017384] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc0 [ 3.017412] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 3.017889] i2c /dev entries driver [ 3.019921] IR NEC protocol handler initialized [ 3.019928] IR Sharp protocol handler initialized [ 3.019935] IR XMP protocol handler initialized [ 3.020016] usbcore: registered new interface driver uvcvideo [ 3.020018] USB Video Class driver (1.1.1) [ 3.024274] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 3.085713] tegra_soctherm 700e2000.soctherm: pllx_offset tz:0 max:14, min:2 [ 3.085720] tegra_soctherm 700e2000.soctherm: pllx_offset tz:1 max:8, min:4 [ 3.086228] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when cpu reaches 102500 mC [ 3.086239] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when cpu reaches 100500 mC [ 3.086456] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 3.086467] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when gpu reaches 103000 mC [ 3.086476] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when gpu reaches 101000 mC [ 3.086729] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 3.086736] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature 2147483647 forced to 127000 [ 3.086744] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when pll reaches 127000 mC [ 3.086750] tegra_soctherm 700e2000.soctherm: throttrip: pll: missing hot temperature [ 3.087158] tegra_soctherm 700e2000.soctherm: failed to register sensor: -19 [ 3.088637] tegra_aotag tegra-aotag: Registering sensor 0 [ 3.088708] tegra_aotag tegra-aotag: Invalid temp readout [ 3.088716] tegra_aotag tegra-aotag: Bound to TZ : ID 0 [ 3.088723] tegra_aotag tegra-aotag: Probe done [SUCCESS]:0 [ 3.089550] FAN dev name: pwm-fan [ 3.089595] FAN:gpio request success. [ 3.089664] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255 [ 3.089955] pwm_fan_driver pwm-fan: unable to request PWM, trying legacy API [ 3.089962] pwm_fan_driver pwm-fan: got pwm for fan [ 3.090109] pwm_fan_driver pwm-fan: fan tach request irq success [ 3.090118] pwm_fan_driver pwm-fan: tach period: 1000 [ 3.090208] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 3.090215] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2 [ 3.090222] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2 [ 3.090229] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2 [ 3.090235] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 3.090242] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 3.090249] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 3.090255] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 3.090262] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 3.090268] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 3.091313] tegra-wdt 60005100.watchdog: Tegra WDT enabled on probe. Timeout = 120 seconds. [ 3.091640] tegra-wdt 60005100.watchdog: initialized (timeout = 120 sec, nowayout = 1) [ 3.091964] device-mapper: uevent: version 1.0.3 [ 3.092296] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 3.095765] sdhci: Secure Digital Host Controller Interface driver [ 3.095768] sdhci: Copyright(c) Pierre Ossman [ 3.095777] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.096421] sdhci-tegra sdhci-tegra.3: Parent select= pll_p rate=408000000 [ 3.096477] sdhci-tegra sdhci-tegra.3: Parent select= pll_c4_out2 rate=199680000 [ 3.096506] sdhci-tegra sdhci-tegra.3: Client registration for eMC Successful [ 3.107784] tegra-se 70012000.se: tegra_se_probe: complete [ 3.108486] hidraw: raw HID events driver (C) Jiri Kosina [ 3.111488] usbcore: registered new interface driver usbhid [ 3.111491] usbhid: USB HID core driver [ 3.170738] parse_throttle_dt_data: Num cap clks = 6 [ 3.170745] parse_throttle_dt_data: clk=cclk_g type=2 [ 3.170756] parse_throttle_dt_data: clk=gpu type=4 [ 3.170801] parse_throttle_dt_data: clk=cap.throttle.c2bus type=0 [ 3.170837] parse_throttle_dt_data: clk=cap.throttle.c3bus type=0 [ 3.170879] parse_throttle_dt_data: clk=cap.throttle.sclk type=0 [ 3.170884] parse_throttle_dt_data: clk=emc type=3 [ 3.177044] tegra_throttle_probe: probe successful. #cdevs=4 [ 3.177340] tegra21x_actmon 6000c800.actmon: in actmon_register()... [ 3.178404] tegra21x_actmon 6000c800.actmon: initialization Completed for the device mc_all [ 3.179977] tegra124-dfll 70110000.clock: config PMU interface as PWM [ 3.184705] No Device Node present for smmu client: snd-soc-dummy !! [ 3.184713] platform snd-soc-dummy: No iommus property found in DT node, got swgids from fixup(101004000) [ 3.184721] No Device Node present for smmu client: snd-soc-dummy !! [ 3.184727] platform snd-soc-dummy: No iommus property found in DT node, got swgids from fixup(101004000) [ 3.184965] No Device Node present for smmu client: snd-soc-dummy !! [ 3.184971] snd-soc-dummy snd-soc-dummy: No iommus property found in DT node, got swgids from fixup(101004000) [ 3.185000] No Device Node present for smmu client: snd-soc-dummy !! [ 3.185006] snd-soc-dummy snd-soc-dummy: No iommus property found in DT node, got swgids from fixup(101004000) [ 3.187411] mmc0: SDHCI controller on sdhci-tegra.3 [sdhci-tegra.3] using ADMA 64-bit with 64 bit addr [ 3.187791] sdhci-tegra sdhci-tegra.1: Parent select= pll_p rate=408000000 [ 3.187812] sdhci-tegra sdhci-tegra.1: Client registration for eMC Successful [ 3.212261] tegra210-i2s tegra210-i2s.0: Missing prop fsync-width for I2S0 [ 3.236465] tegra210-i2s tegra210-i2s.2: Missing prop fsync-width for I2S2 [ 3.236747] tegra210-i2s tegra210-i2s.3: Missing prop fsync-width for I2S3 [ 3.237131] tegra210-i2s tegra210-i2s.4: Missing prop fsync-width for I2S4 [ 3.242387] OPE platform probe [ 3.242584] OPE platform probe successful [ 3.242638] OPE platform probe [ 3.242816] OPE platform probe successful [ 3.244587] tegra-snd-t210ref-mobile-rt565x sound: Failed to get HP Det GPIO, should be handled by codec [ 3.267401] mmc1: SDHCI controller on sdhci-tegra.1 [sdhci-tegra.1] using ADMA 64-bit with 64 bit addr [ 3.268165] sdhci-tegra sdhci-tegra.0: Got CD GPIO [ 3.268215] sdhci-tegra sdhci-tegra.0: Got WP GPIO [ 3.268296] sdhci-tegra sdhci-tegra.0: Parent select= pll_p rate=408000000 [ 3.268353] sdhci-tegra sdhci-tegra.0: wakeup init done, cd_irq: 262 [ 3.268376] sdhci-tegra sdhci-tegra.0: Client registration for eMC Successful [ 3.270339] en-vdd-sd: supplied by vdd-3v3 [ 3.307607] mmc2: SDHCI controller on sdhci-tegra.0 [sdhci-tegra.0] using ADMA 64-bit with 64 bit addr [ 3.314010] tegra-snd-t210ref-mobile-rt565x sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 3.314243] tegra-snd-t210ref-mobile-rt565x sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 3.314472] tegra-snd-t210ref-mobile-rt565x sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 3.314698] tegra-snd-t210ref-mobile-rt565x sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 3.314920] tegra-snd-t210ref-mobile-rt565x sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 3.315144] tegra-snd-t210ref-mobile-rt565x sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 3.315392] tegra-snd-t210ref-mobile-rt565x sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 3.315624] tegra-snd-t210ref-mobile-rt565x sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 3.315853] tegra-snd-t210ref-mobile-rt565x sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 3.316088] tegra-snd-t210ref-mobile-rt565x sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 3.362313] input: tegra-snd-t210ref-mobile-rt565x Headphone Jack as /devices/sound/sound/card1/input0 [ 3.362807] tegra-snd-t210ref-mobile-rt565x sound: codec-dai "dit-hifi" registered [ 3.362813] tegra-snd-t210ref-mobile-rt565x sound: This is a dummy codec [ 3.363681] GACT probability NOT on [ 3.363693] Mirror/redirect action on [ 3.363708] u32 classifier [ 3.363710] Actions configured [ 3.363722] Netfilter messages via NETLINK v0.30. [ 3.363772] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 3.364200] ctnetlink v0.93: registering with nfnetlink. [ 3.371355] xt_time: kernel timezone is -0000 [ 3.371512] ipip: IPv4 over IPv4 tunneling driver [ 3.372157] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.372294] arp_tables: (C) 2002 David S. Miller [ 3.372370] Initializing XFRM netlink socket [ 3.373213] NET: Registered protocol family 10 [ 3.374210] mip6: Mobile IPv6 [ 3.374240] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 3.374432] sit: IPv6 over IPv4 tunneling driver [ 3.375581] NET: Registered protocol family 17 [ 3.375610] NET: Registered protocol family 15 [ 3.375647] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 3.375677] Key type dns_resolver registered [ 3.380118] Registered cp15_barrier emulation handler [ 3.419123] input: tegra-hda HDMI/DP,pcm=3 as /devices/70030000.hda/sound/card0/input1 [ 3.428499] mmc0: MAN_BKOPS_EN bit is not set [ 3.531002] mmc0: Skipping tuning since strobe enabled [ 3.660111] mmc0: new HS400 MMC card at address 0001 [ 3.660786] mmcblk0: mmc0:0001 016G32 14.7 GiB [ 3.661075] mmcblk0rpmb: mmc0:0001 016G32 partition 3 4.00 MiB [ 3.677065] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 [ 4.123469] mmc1: queuing unknown CIS tuple 0x80 (5 bytes) [ 4.464894] tegradc tegradc.1: hdmi: pclk:83764K, set prod-setting:prod_c_hdmi_75m_150m [ 4.478994] isp 54600000.isp: initialized [ 4.491824] isp 54680000.isp: initialized [ 4.507040] clk_cbus_recalc_rate: no gbus parent [ 4.514886] clk_cbus_round_rate: no gbus parent [ 4.522628] clk_cbus_round_rate: no gbus parent [ 4.530375] clk_cbus_recalc_rate: no gbus parent [ 4.538780] clk_cbus_recalc_rate: no gbus parent [ 4.546735] clk_cbus_round_rate: no gbus parent [ 4.554601] clk_cbus_round_rate: no gbus parent [ 4.562463] clk_cbus_recalc_rate: no gbus parent [ 4.570474] tegra_dvfs: GPU-cap: registered [ 4.578291] tegra dvfs: vdd-cpu: nominal 1226mV, offset 708000uV, step 19200uV, scaling enabled [ 4.590411] tegra dvfs: vdd-core: nominal 1075mV, offset 600000uV, step 12500uV, scaling enabled [ 4.602722] tegra dvfs: vdd-gpu: nominal 1090mV, offset 710000uV, step 10000uV, scaling enabled [ 4.631970] tegra_dvfs: vdd-gpu-vts: registered [ 4.634874] xhci-tegra 70090000.xusb: can't get usb3-0 phy (-517) [ 4.635566] tegra21x-padctl-uphy 7009f000.pinctrl: padctl mmio start 0x000000007009f000 end 0x000000007009ffff [ 4.635576] tegra21x-padctl-uphy 7009f000.pinctrl: TEGRA_FUSE_SKU_CALIB_0 0x8168c0e [ 4.635584] tegra21x-padctl-uphy 7009f000.pinctrl: TEGRA_FUSE_USB_CALIB_EXT_0 0x4 [ 4.636940] tegra21x-padctl-uphy 7009f000.pinctrl: UTMI-0 is used by XUSB [ 4.636950] tegra21x-padctl-uphy 7009f000.pinctrl: using UTMI port 0 for otg [ 4.636958] tegra21x-padctl-uphy 7009f000.pinctrl: UTMI-2 is used by XUSB [ 4.636973] tegra21x-padctl-uphy 7009f000.pinctrl: uphy_lane = 5, set usb3_lanes = 0x20 [ 4.636990] tegra21x-padctl-uphy 7009f000.pinctrl: USB3 port 1 maps to USB2 port 2 [ 4.636996] tegra21x-padctl-uphy 7009f000.pinctrl: UTMI-1 is used by XUSB [ 4.637010] tegra21x-padctl-uphy 7009f000.pinctrl: uphy_lane = 6, set usb3_lanes = 0x60 [ 4.637024] tegra21x-padctl-uphy 7009f000.pinctrl: USB3 port 0 maps to USB2 port 1 [ 4.637040] tegra21x-padctl-uphy 7009f000.pinctrl: uphy_lane = 1, set pcie_lanes = 0x2 [ 4.637060] tegra21x-padctl-uphy 7009f000.pinctrl: uphy_lane = 2, set pcie_lanes = 0x6 [ 4.637078] tegra21x-padctl-uphy 7009f000.pinctrl: uphy_lane = 3, set pcie_lanes = 0xe [ 4.637096] tegra21x-padctl-uphy 7009f000.pinctrl: uphy_lane = 4, set pcie_lanes = 0x1e [ 4.637114] tegra21x-padctl-uphy 7009f000.pinctrl: uphy_lane = 0, set pcie_lanes = 0x1f [ 4.637134] tegra21x-padctl-uphy 7009f000.pinctrl: uphy_lane = 7, set sata_lanes = 0x80 [ 4.638059] usb-vbus1: supplied by vdd-3v3 [ 4.638583] tegradc tegradc.1: nominal-pclk:83500000 parent:83763541 div:1.0 pclk:83763541 82665000~91015000 [ 4.640507] tegra21x-padctl-uphy 7009f000.pinctrl: Done tegra21x_padctl_uphy_probe [ 4.643240] tegra-pcie 1003000.pcie-controller: 4x1, 1x1 configuration [ 4.643509] tegra-pcie 1003000.pcie-controller: PCIE: Enable power rails [ 4.644238] clk_cbus_round_rate: no gbus parent [ 4.644245] tegra_gpu_edp gpu_edp: unable to get max GPU freq [ 4.644599] tegra-pcie 1003000.pcie-controller: probing port 0, using 4 lanes [ 4.644879] tegra-ahci 70027000.sata: Missing devslp-active state [ 4.645714] tegra-pcie 1003000.pcie-controller: probing port 1, using 1 lanes [ 4.645920] tegra-ahci 70027000.sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode [ 4.645932] tegra-ahci 70027000.sata: flags: 64bit ncq sntf pm led pmp pio slum part deso sadm apst [ 4.646469] gk20a 57000000.gpu: GPCPLL initial settings: NA mode, M=1, N=34, P=3 [ 4.651262] scsi host0: tegra_ahci [ 4.651885] scsi host1: tegra_ahci [ 4.652117] ata1: SATA max UDMA/133 mmio [mem 0x70027000-0x70028fff] port 0x100 irq 370 [ 4.652121] ata2: DUMMY [ 4.656416] tegra-xudc-new 700d0000.xudc: USB charger detection disabled [ 4.657400] tegra-xudc-new 700d0000.xudc: device mode on [ 4.658570] tegra_core_action core_dvfs_cdev_floor: Tegra CORE DVFS 'floor cooling device' registered [ 4.659977] tegra_core_action core_dvfs_cdev_cap: Tegra CORE DVFS 'cap cooling device' registered [ 4.660412] tegra_dfll_action dfll-cdev-cap: Tegra DFLL 'cap cooling device' registered [ 4.661110] tegra_dfll_action dfll-cdev-floor: Tegra DFLL 'floor cooling device' registered [ 4.663882] xhci-tegra 70090000.xusb: UTMI port 0 has OTG_CAP [ 4.663884] xhci-tegra 70090000.xusb: No USB3 port has OTG_CAP [ 4.667078] xhci-tegra 70090000.xusb: Direct firmware load for tegra21x_xusb_firmware failed with error -2 [ 4.667081] xhci-tegra 70090000.xusb: Falling back to user helper [ 4.668715] input: gpio-keys as /devices/gpio-keys/input/input2 [ 4.709155] tegra_rtc 7000e000.rtc: setting system clock to 2018-01-26 03:27:26 UTC (1516937246) [ 4.710029] vi 54080000.vi: vi_probe: ++ [ 4.719596] mmc1 tuning done saved tap delay=49 [ 4.719597] mmc1: hw tuning done ... [ 4.719601] mmc1: tuning_window[0]: 0x8fffffff [ 4.719605] mmc1: tuning_window[1]: 0xffffffff [ 4.719608] mmc1: tuning_window[2]: 0xffffff8f [ 4.719612] mmc1: tuning_window[3]: 0x7fff8fff [ 4.719615] mmc1: tuning_window[4]: 0x0 [ 4.719618] mmc1: tuning_window[5]: 0x0 [ 4.719621] mmc1: tuning_window[6]: 0x0 [ 4.719625] mmc1: tuning_window[7]: 0x0 [ 4.719626] sdhci: Tap value: 49 | Trim value: 8 [ 4.719628] sdhci: SDMMC_VENDOR_INTR_STATUS[0x108]: 0x40000 [ 4.724633] mmc1: queuing unknown CIS tuple 0x91 (3 bytes) [ 4.724657] mmc1: new ultra high speed SDR104 SDIO card at address 0001 [ 4.734297] vi 54080000.vi: initialized [ 4.745768] vi 54080000.vi: all channel register failed [ 4.753497] Disable partitions left on by BL [ 4.753498] disb [ 4.763198] DRAM derating cdev registered. [ 4.764057] vdd-cpu-fixed: disabling [ 4.764067] vdd-cam-hv: disabling [ 4.764151] avdd-ts-hv: disabling [ 4.764217] vdd-ts: disabling [ 4.764282] max77620-gpio7: disabling [ 4.764421] lcd-bl-en: disabling [ 4.764424] en-vdd-sd: disabling [ 4.764426] en-vdd-cam: disabling [ 4.764429] aux-3v3: disabling [ 4.764431] snsr_pm: disabling [ 4.764433] vdd-disp-3v0: disabling [ 4.764435] vdd-fan: disabling [ 4.764437] usb-vbus1: disabling [ 4.764439] en-vdd-ts-1v8: disabling [ 4.764440] en-vdd-ts-hv-3v3: disabling [ 4.764442] en-vdd-disp-3v3: disabling [ 4.764556] en-mdm-pwr-3v7: disabling [ 4.764558] en-vdd-disp-1v8: disabling [ 4.764668] en-vdd-cam-hv-2v8: disabling [ 4.764670] rtl-5v0: disabling [ 4.764671] en-usb-vbus2: disabling [ 4.764673] en-vdd-cam-1v2: disabling [ 4.764675] en-vdd-vcm-2v8: disabling [ 4.765532] ALSA device list: [ 4.765534] #0: tegra-hda at 0x70038000 irq 348 [ 4.765536] #1: tegra-snd-t210ref-mobile-rt565x [ 4.975994] ata1: SATA link down (SStatus 0 SControl 300) [ 5.069724] tegra-pcie 1003000.pcie-controller: link 0 down, retrying [ 5.327133] tegradc tegradc.1: hdmi: plugged [ 5.333285] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities [ 5.343154] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities [ 5.358002] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 5.366969] VFS: Mounted root (ext4 filesystem) on device 179:1. [ 5.377580] devtmpfs: mounted [ 5.381763] Freeing unused kernel memory: 1208K (ffffffc001175000 - ffffffc0012a3000) [ 5.394084] Freeing alternatives memory: 76K (ffffffc0012a3000 - ffffffc0012b6000) [ 5.475300] tegra-pcie 1003000.pcie-controller: link 0 down, retrying [ 5.502581] random: systemd: uninitialized urandom read (16 bytes read, 73 bits of entropy available) [ 5.514750] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) [ 5.535648] systemd[1]: Detected architecture arm64. [ 5.550977] systemd[1]: Set hostname to . [ 5.566484] random: systemd: uninitialized urandom read (16 bytes read, 74 bits of entropy available) [ 5.578018] random: systemd: uninitialized urandom read (16 bytes read, 74 bits of entropy available) [ 5.595121] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 75 bits of entropy available) [ 5.595541] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 75 bits of entropy available) [ 5.595621] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 75 bits of entropy available) [ 5.595641] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 75 bits of entropy available) [ 5.595762] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 75 bits of entropy available) [ 5.655766] random: systemd-cryptse: uninitialized urandom read (16 bytes read, 76 bits of entropy available) [ 5.659767] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 78 bits of entropy available) [ 5.774991] systemd[1]: Listening on Journal Socket (/dev/log). [ 5.784050] systemd[1]: Listening on udev Kernel Socket. [ 5.792457] systemd[1]: Listening on udev Control Socket. [ 5.800954] systemd[1]: Reached target Swap. [ 5.808358] systemd[1]: Reached target Encrypted Volumes. [ 5.817091] systemd[1]: Listening on Journal Audit Socket. [ 5.825886] systemd[1]: Reached target Remote File Systems (Pre). [ 5.835413] systemd[1]: Reached target Remote File Systems. [ 5.844534] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 5.855359] systemd[1]: Created slice User and Session Slice. [ 5.864905] systemd[1]: Listening on Journal Socket. [ 5.873666] systemd[1]: Listening on Syslog Socket. [ 5.882300] systemd[1]: Created slice System Slice. [ 5.890965] systemd[1]: Created slice system-getty.slice. [ 5.900126] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 5.910734] systemd[1]: Mounting Debug File System... [ 5.920347] systemd[1]: Starting Remount Root and Kernel File Systems... [ 5.931692] systemd[1]: Started Braille Device Support. [ 5.944199] systemd[1]: Reached target Slices. [ 5.953127] systemd[1]: Starting Journal Service... [ 5.965618] systemd[1]: Starting Load Kernel Modules... [ 5.974622] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 5.986039] systemd[1]: Reached target User and Group Name Lookups. [ 5.996967] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 6.012124] systemd[1]: Mounted Debug File System. [ 6.021702] systemd[1]: Started Remount Root and Kernel File Systems. [ 6.032868] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 6.046667] systemd[1]: Started Load Kernel Modules. [ 6.068386] systemd[1]: Mounting FUSE Control File System... [ 6.079009] systemd[1]: Mounting Configuration File System... [ 6.089683] systemd[1]: Starting Apply Kernel Variables... [ 6.100697] systemd[1]: Starting Create Static Device Nodes in /dev... [ 6.112385] systemd[1]: Starting Load/Save Random Seed... [ 6.126553] systemd[1]: Starting udev Coldplug all Devices... [ 6.137883] systemd[1]: Mounted Configuration File System. [ 6.147580] systemd[1]: Mounted FUSE Control File System. [ 6.157401] systemd[1]: Started Journal Service. [ 6.209008] systemd-journald[210]: Received request to flush runtime journal from PID 1 [ 6.217335] tegra-pcie 1003000.pcie-controller: link 0 down, retrying [ 6.219308] tegra-pcie 1003000.pcie-controller: link 0 down, ignoring [ 6.456706] xhci-tegra 70090000.xusb: cannot find firmware....retry after 1 second [ 6.615910] dhd_module_init in [ 6.623411] found wifi platform device bcmdhd_wlan [ 6.630879] Power-up adapter 'DHD generic adapter' [ 6.637348] wifi_platform_set_power = 1 [ 6.642597] tegra-pcie 1003000.pcie-controller: link 1 down, retrying [ 6.655305] random: nonblocking pool is initialized [ 6.855370] wifi_platform_bus_enumerate device present 1 [ 6.885882] wifi_platform_bus_enumerate device present 0 [ 6.893154] F1 signature read @0x18000000=0x17214354 [ 6.896712] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x1 pkg:0x2 [ 6.897505] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000 [ 6.897562] wifi_platform_prealloc: failed to alloc static mem section 7 [ 6.897568] wifi_platform_get_mac_addr [ 6.900059] CFG80211-ERROR) wl_setup_wiphy : Registering Vendor80211 [ 6.900525] wl_create_event_handler(): thread:wl_event_handler:1ff started [ 6.900717] CFG80211-ERROR) wl_event_handler : tsk Enter, tsk = 0xffffffc0f2aa1a70 [ 6.900734] dhd_attach(): thread:dhd_watchdog_thread:200 started [ 6.900762] dhd_attach(): thread:dhd_dpc:201 started [ 6.900798] dhd_attach(): thread:dhd_rxf:202 started [ 6.900806] dhd_deferred_work_init: work queue initialized [ 6.900975] Dongle Host Driver, version 1.201.82 (r) [ 6.900975] Compiled in drivers/net/wireless/bcmdhd on Jul 20 2017 at 00:39:01 [ 6.901301] tegra_sysfs_register [ 6.901332] Register interface [wlan0] MAC: 00:04:4b:65:ca:d4 [ 6.901332] [ 6.901335] dhd_prot_ioctl : bus is down. we have nothing to do [ 6.901422] sdhci-tegra sdhci-tegra.1: Tuning already done, restoring the best tap value : 49 [ 6.902468] wifi_platform_set_power = 0 [ 7.164631] tegra-pcie 1003000.pcie-controller: link 1 down, retrying [ 7.457692] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 7.465856] [ 7.465856] Dongle Host Driver, version 1.201.82 (r) [ 7.465856] Compiled in drivers/net/wireless/bcmdhd on Jul 20 2017 at 00:39:01 [ 7.484430] xhci-tegra 70090000.xusb: Firmware timestamp: 2016-11-24 02:31:08 UTC, Version: 50.18 release [ 7.484491] wl_android_wifi_on in [ 7.484494] wifi_platform_set_power = 1 [ 7.508488] xhci-tegra 70090000.xusb: xHCI Host Controller [ 7.516422] xhci-tegra 70090000.xusb: new USB bus registered, assigned bus number 1 [ 7.527398] xhci-tegra 70090000.xusb: hcc params 0x0184f525 hci version 0x100 quirks 0x00010810 [ 7.538635] xhci-tegra 70090000.xusb: irq 319, io mem 0x70090000 [ 7.538797] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 7.538800] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.538803] usb usb1: Product: xHCI Host Controller [ 7.538805] usb usb1: Manufacturer: Linux 4.4.38-tegra xhci-hcd [ 7.538807] usb usb1: SerialNumber: 70090000.xusb [ 7.541248] hub 1-0:1.0: USB hub found [ 7.541284] hub 1-0:1.0: 5 ports detected [ 7.563391] xhci-tegra 70090000.xusb: xHCI Host Controller [ 7.563399] xhci-tegra 70090000.xusb: new USB bus registered, assigned bus number 2 [ 7.563509] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 7.563512] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.563514] usb usb2: Product: xHCI Host Controller [ 7.563516] usb usb2: Manufacturer: Linux 4.4.38-tegra xhci-hcd [ 7.563518] usb usb2: SerialNumber: 70090000.xusb [ 7.564654] hub 2-0:1.0: USB hub found [ 7.564684] hub 2-0:1.0: 4 ports detected [ 7.611306] tegra-pcie 1003000.pcie-controller: link 1 down, retrying [ 7.613320] tegra-pcie 1003000.pcie-controller: link 1 down, ignoring [ 7.613341] tegra-pcie 1003000.pcie-controller: PCIE: no end points detected [ 7.614378] tegra-pcie 1003000.pcie-controller: PCIE: Disable power rails [ 7.781586] mmc1: queuing unknown CIS tuple 0x80 (5 bytes) [ 7.877778] sdhci-tegra sdhci-tegra.1: Tuning already done, restoring the best tap value : 49 [ 7.887119] F1 signature read @0x18000000=0x17214354 [ 7.887786] usb 2-1: new SuperSpeed USB device number 2 using xhci-tegra [ 7.900773] usb 2-1: New USB device found, idVendor=0955, idProduct=09ff [ 7.907528] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [ 7.914734] usb 2-1: Product: USB 10/100/1000 LAN [ 7.919496] usb 2-1: Manufacturer: Nvidia [ 7.923560] usb 2-1: SerialNumber: 000001000000 [ 7.928746] xhci-tegra 70090000.xusb: tegra_xhci_mbox_work mailbox command 6 [ 7.937856] xhci-tegra 70090000.xusb: tegra_xhci_mbox_work mailbox command 6 [ 7.945555] xhci-tegra 70090000.xusb: tegra_xhci_mbox_work mailbox command 6 [ 7.954119] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x1 pkg:0x2 [ 7.961281] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000 [ 8.029863] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded. [ 8.071534] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us) [ 8.072687] wifi_platform_get_mac_addr [ 8.074071] Firmware up: op_mode=0x0005, MAC=00:04:4b:65:ca:d4 [ 8.079363] dhd_preinit_ioctls pspretend_threshold for HostAPD failed -23 [ 8.083505] Firmware version = wl0: Sep 14 2016 11:38:27 version 7.35.221.18 (r657725) FWID 01-9001dfb5 [ 8.085664] dhd_interworking_enable: failed to set WNM info, ret=-23 [ 8.085829] tegra_sysfs_on [ 8.097103] usb 2-2: new SuperSpeed USB device number 3 using xhci-tegra [ 8.196289] usb 2-2: feature bit otg_vbus_off set [ 8.196295] usb 2-2: New USB device found, idVendor=2109, idProduct=0813 [ 8.196298] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 8.196301] usb 2-2: Product: USB3.0 Hub [ 8.196304] usb 2-2: Manufacturer: VIA Labs, Inc. [ 8.196816] cfg80211: World regulatory domain updated: [ 8.196819] cfg80211: DFS Master region: unset [ 8.196820] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 8.196824] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 8.196848] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 8.196850] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 8.196853] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 8.196855] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 8.196858] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 8.196860] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 8.196862] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 8.199195] tegradc tegradc.1: nominal-pclk:83764800 parent:83763541 div:1.0 pclk:83763541 82927152~91303632 [ 8.200185] tegradc tegradc.1: hdmi: pclk:83764K, set prod-setting:prod_c_hdmi_75m_150m [ 8.200254] hub 2-2:1.0: USB hub found [ 8.200576] hub 2-2:1.0: 4 ports detected [ 8.286768] CFGP2P-ERROR) wl_cfgp2p_add_p2p_disc_if : P2P interface registered [ 8.296411] WLC_E_IF: NO_IF set, event Ignored [ 8.304151] usb 2-1: reset SuperSpeed USB device number 2 using xhci-tegra [ 8.350745] r8152 2-1:1.0 eth0: v2.03.3 (2015/01/29) [ 8.350749] r8152 2-1:1.0 eth0: This product is covered by one or more of the following patents: [ 8.350749] US6,570,884, US6,115,776, and US6,327,625. [ 8.350749] [ 8.410737] xhci-tegra 70090000.xusb: tegra_xhci_mbox_work mailbox command 17 [ 8.418333] xhci-tegra 70090000.xusb: tegra_xhci_mbox_work mailbox command 18 Ubuntu 16.04 LTS tegra-ubuntu ttyS0 tegra-ubuntu login: nvidia (automatic login) Last login: Fri Jan 26 03:23:12 UTC 2018 on ttyS0 [ 8.615327] usb 1-3: new high-speed USB device number 2 using xhci-tegra [ 8.641888] usb 1-3: feature bit otg_vbus_off set [ 8.646750] usb 1-3: New USB device found, idVendor=2109, idProduct=2813 [ 8.653661] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 8.660973] usb 1-3: Product: USB2.0 Hub [ 8.665004] usb 1-3: Manufacturer: VIA Labs, Inc. [ 8.671103] hub 1-3:1.0: USB hub found [ 8.675238] hub 1-3:1.0: 4 ports detected Welcome to Ubuntu 16.04 LTS (GNU/Linux 4.4.38-tegra aarch64) * Documentation: https://help.ubuntu.com/ 300 packages can be updated. 11 updates are security updates. [ 8.971347] usb 1-3.2: new full-speed USB device number 3 using xhci-tegra [ 8.994097] usb 1-3.2: New USB device found, idVendor=062a, idProduct=4101 [ 9.001029] usb 1-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 9.008435] usb 1-3.2: Product: 2.4G Keyboard Mouse [ 9.013403] usb 1-3.2: Manufacturer: MOSART Semi. [ 9.018749] usb 1-3.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 9.031150] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/70090000.xusb/usb1/1-3/1-3.2/1-3.2:1.0/0003:062A:4101.0001/input/input3 [ 9.099996] hid-generic 0003:062A:4101.0001: input,hidraw0: USB HID v1.10 Keyboard [MOSART Semi. 2.4G Keyboard Mouse] on usb-70090000.xusb-3.2/input0 [ 9.116619] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/70090000.xusb/usb1/1-3/1-3.2/1-3.2:1.1/0003:062A:4101.0002/input/input4 nvidia@tegra-ubuntu:~$ [ 9.188058] hid-generic 0003:062A:4101.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [MOSART Semi. 2.4G Keyboard Mouse] on usb-70090000.xusb-3.2/input1 [ 9.327495] usb 1-3.4: new low-speed USB device number 4 using xhci-tegra [ 9.351102] usb 1-3.4: New USB device found, idVendor=0461, idProduct=4d65 [ 9.358110] usb 1-3.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 9.365552] usb 1-3.4: Product: USB Optical Mouse [ 9.370820] usb 1-3.4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 9.383168] input: USB Optical Mouse as /devices/70090000.xusb/usb1/1-3/1-3.4/1-3.4:1.0/0003:0461:4D65.0003/input/input5 [ 9.394511] hid-generic 0003:0461:4D65.0003: input,hidraw2: USB HID v1.11 Mouse [USB Optical Mouse] on usb-70090000.xusb-3.4/input0 [ 9.410380] r8152 2-1:1.0 enx00044b65cad6: renamed from eth0 [ 9.458629] IPv6: ADDRCONF(NETDEV_UP): enx00044b65cad6: link is not ready [ 9.543572] IPv6: ADDRCONF(NETDEV_UP): enx00044b65cad6: link is not ready [ 11.460504] Setting pll_a = 45158400 Hz clk_out = 11289600 Hz [ 11.519021] Setting pll_a = 45158400 Hz clk_out = 11289600 Hz [ 11.553586] Setting pll_a = 45158400 Hz clk_out = 11289600 Hz [ 11.590004] Setting pll_a = 45158400 Hz clk_out = 11289600 Hz [ 11.591459] Setting pll_a = 45158400 Hz clk_out = 11289600 Hz [ 11.594757] Setting pll_a = 45158400 Hz clk_out = 11289600 Hz [ 11.618822] Setting pll_a = 45158400 Hz clk_out = 11289600 Hz [ 11.620368] Setting pll_a = 45158400 Hz clk_out = 11289600 Hz [ 11.632314] Setting pll_a = 45158400 Hz clk_out = 11289600 Hz [ 11.660831] Setting pll_a = 45158400 Hz clk_out = 11289600 Hz [ 11.739126] tegradc tegradc.1: nominal-pclk:83764800 parent:83763541 div:1.0 pclk:83763541 82927152~91303632 [ 11.739971] tegradc tegradc.1: hdmi: pclk:83764K, set prod-setting:prod_c_hdmi_75m_150m [ 12.545804] IPv6: ADDRCONF(NETDEV_CHANGE): enx00044b65cad6: link becomes ready [ 13.820823] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.