[0018.495] E> Blob is not set [0019.066] I> Welcome to MB2(TBoot-BPMP) Recovery(version: 01.00.160913-t186-M-00.00-mobile-bc98f182) [0019.075] I> bit @ 0xd480000 [0019.078] I> Boot-device: eMMC [0019.102] I> sdmmc DDR50 mode [0019.106] I> sdmmc bdev is already initialized [0019.111] I> pmic: reset reason (nverc) : 0x40 [0019.118] I> Found 16 partitions in SDMMC_BOOT (instance 3) [0019.125] I> Found 31 partitions in SDMMC_USER (instance 3) [0019.134] I> Binary(16) of size 533504 is loaded @ 0xd7800000 [0019.142] I> Binary(17) of size 465840 is loaded @ 0xd798e440 [0019.321] I> Copy BTCM section [0019.325] I> Binary(13) of size 202912 is loaded @ 0x96000000 [0019.332] I> Binary(20) of size 322272 is loaded @ 0x8520f400 [0019.340] I> Binary(14) of size 312752 is loaded @ 0x8530f600 [0019.347] I> TOS boot-params @ 0x85000000 [0019.351] I> TOS params prepared [0019.355] I> Loading EKS ... [0019.358] I> Binary(15) of size 1040 is loaded @ 0x8590f800 [0019.363] I> EKB detected (length: 0x400) @ 0x8590f800 [0019.368] I> Copied encrypted keys [0019.372] I> boot profiler @ 0x275844000 [0019.376] I> boot profiler for TOS @ 0x275844000 [0019.381] I> Unhalting SCE [0019.383] I> Primary Memory Start:80000000 Size:70000000 [0019.389] I> Extended Memory Start:f0110000 Size:1856f0000 [0019.395] I> MB2(TBoot-BPMP) Recovery done NOTICE: BL31: v1.3(release):a28d87f09 NOTICE: BL31: Built : 21:15:42, Aug 12 2019 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! keystore-demo: 141: Hello world from keystore-demo app keystore-demo: 207: main: EKB contents match expected value exit called, thread 0xffffffffea87ad58, name trusty_app_2_7d18fc60-e9fc-11e8 platform_bootstrap_epilog: trusty bootstrap complete [0019.758] I> Welcome to TBoot-CPU Recovery(version: 01.00.160913-t186-M-00.00-mobile-b6c9c72e) [0019.766] I> gpio framework initialized [0019.770] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio' driver [0019.777] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio-aon' driver [0019.785] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee [0019.791] E> I2C: slave not found in slaves. [0019.796] E> I2C: Could not write 0 bytes to slave: 0x00ee with repeat start false. [0019.803] E> I2C_DEV: Failed to send register address 0x00000004. [0019.809] E> I2C_DEV: Could not write 1 registers of size 1 to slave 0xee at 0x00000004 via instance 0. [0019.819] E> tca9539_device_init: failed to write polar reg [0019.824] E> tegrabl_tca9539_init: failed to init device! [0019.829] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xe8 [0019.835] E> I2C: slave not found in slaves. [0019.839] E> I2C: Could not write 0 bytes to slave: 0x00e8 with repeat start false. [0019.847] E> I2C_DEV: Failed to send register address 0x00000004. [0019.853] E> I2C_DEV: Could not write 1 registers of size 1 to slave 0xe8 at 0x00000004 via instance 0. [0019.862] E> tca9539_device_init: failed to write polar reg [0019.868] E> tegrabl_tca9539_init: failed to init device! [0019.873] I> CPU: ARM Cortex A57 [0019.876] I> CPU: MIDR: 0x411fd073, MPIDR: 0x80000100 [0019.881] I> L2 ECC enabled : yes [0019.884] I> CPU-BL Params @ 0x275800000 [0019.888] I> 0) Base:0x00000000 Size:0x00000000 [0019.892] I> 1) Base:0x277f00000 Size:0x00100000 [0019.897] I> 2) Base:0x277e00000 Size:0x00100000 [0019.901] I> 3) Base:0x277d00000 Size:0x00100000 [0019.906] I> 4) Base:0x277c00000 Size:0x00100000 [0019.910] I> 5) Base:0x277b00000 Size:0x00100000 [0019.915] I> 6) Base:0x277800000 Size:0x00200000 [0019.919] I> 7) Base:0x277400000 Size:0x00400000 [0019.924] I> 8) Base:0x277a00000 Size:0x00100000 [0019.928] I> 9) Base:0x277300000 Size:0x00100000 [0019.933] I> 10) Base:0x276800000 Size:0x00800000 [0019.937] I> 11) Base:0x30000000 Size:0x00040000 [0019.942] I> 12) Base:0xf0000000 Size:0x00100000 [0019.946] I> 13) Base:0x30040000 Size:0x00001000 [0019.951] I> 14) Base:0x30048000 Size:0x00001000 [0019.955] I> 15) Base:0x30049000 Size:0x00001000 [0019.959] I> 16) Base:0x3004a000 Size:0x00001000 [0019.964] I> 17) Base:0x3004b000 Size:0x00001000 [0019.968] I> 18) Base:0x3004c000 Size:0x00001000 [0019.973] I> 19) Base:0x3004d000 Size:0x00001000 [0019.977] I> 20) Base:0x3004e000 Size:0x00001000 [0019.982] I> 21) Base:0x3004f000 Size:0x00001000 [0019.986] I> 22) Base:0x00000000 Size:0x00000000 [0019.990] I> 23) Base:0xf0100000 Size:0x00010000 [0019.995] I> 24) Base:0x00000000 Size:0x00000000 [0019.999] I> 25) Base:0x00000000 Size:0x00000000 [0020.004] I> 26) Base:0x00000000 Size:0x00000000 [0020.008] I> 27) Base:0x00000000 Size:0x00000000 [0020.013] I> 28) Base:0x84400000 Size:0x00400000 [0020.017] I> 29) Base:0x30000000 Size:0x00010000 [0020.021] I> 30) Base:0x278000000 Size:0x08000000 [0020.026] I> 31) Base:0x00000000 Size:0x00000000 [0020.030] I> 32) Base:0x276000000 Size:0x00600000 [0020.035] I> 33) Base:0x80000000 Size:0x70000000 [0020.039] I> 34) Base:0xf0110000 Size:0x1856f0000 [0020.044] I> 35) Base:0x00000000 Size:0x00000000 [0020.048] I> 36) Base:0x00000000 Size:0x00000000 [0020.053] I> 37) Base:0x2772e0000 Size:0x00020000 [0020.057] I> 38) Base:0x84000000 Size:0x00400000 [0020.062] I> 39) Base:0x96000000 Size:0x02000000 [0020.066] I> 40) Base:0x85000000 Size:0x01200000 [0020.071] I> 41) Base:0x275800000 Size:0x00500000 [0020.075] I> 42) Base:0x00000000 Size:0x00000000 [0020.080] I> 43) Base:0x00000000 Size:0x00000000 [0020.084] I> Boot-device: eMMC [0020.109] I> sdmmc DDR50 mode [0020.112] I> sdmmc bdev is already initialized [0020.118] I> Found 16 partitions in SDMMC_BOOT (instance 3) [0020.125] I> Found 31 partitions in SDMMC_USER (instance 3) [0020.130] I> bl dtb load address = @0x8520f400 [0020.134] I> Recovery boot_type: 0 [0020.141] I> fixed regulator driver initialized [0020.183] I> register 'maxim' power off handle [0020.190] I> virtual i2c enabled [0020.193] I> registered 'maxim,max77620' pmic [0020.197] I> tegrabl_gpio_driver_register: register 'max77620-gpio' driver [0020.204] I> Entering 3p server [0020.207] I> SUPER SPEED [0020.736] I> USB configuration success [0021.097] I> Writing kernel-dtb partition. [0021.120] I> Rebooting : reset-coldboot [0000.197] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-1b8ce67c) [0000.206] I> bit @ 0xd480000 [0000.209] I> Boot-device: eMMC [0000.212] I> sdmmc bdev is already initialized [0000.217] I> pmic: reset reason (nverc) : 0x0 [0000.224] I> Found 16 partitions in SDMMC_BOOT (instance 3) [0000.231] I> Found 31 partitions in SDMMC_USER (instance 3) [0000.237] I> A/B: bin_type (16) slot 0 [0000.241] I> Loading partition bpmp-fw at 0xd7800000 [0000.246] I> Reading two headers - addr:0xd7800000 blocks:1 [0000.251] I> Addr: 0xd7800000, start-block: 58777608, num_blocks: 1 [0000.266] I> Binary(16) of size 533504 is loaded @ 0xd7800000 [0000.272] I> A/B: bin_type (17) slot 0 [0000.276] I> Loading partition bpmp-fw-dtb at 0xd79f0000 [0000.281] I> Reading two headers - addr:0xd79f0000 blocks:1 [0000.286] I> Addr: 0xd79f0000, start-block: 58780024, num_blocks: 1 [0000.300] I> Binary(17) of size 465840 is loaded @ 0xd798e200 [0000.479] I> Loading SCE-FW ... [0000.482] I> A/B: bin_type (12) slot 0 [0000.486] I> Loading partition sce-fw at 0xd7300000 [0000.491] I> Reading two headers - addr:0xd7300000 blocks:1 [0000.496] I> Addr: 0xd7300000, start-block: 58782024, num_blocks: 1 [0000.506] I> Binary(12) of size 125168 is loaded @ 0xd7300000 [0000.511] I> Init SCE [0000.514] I> Loading APE-FW ... [0000.517] I> A/B: bin_type (11) slot 0 [0000.520] I> Loading partition adsp-fw at 0xd7400000 [0000.525] I> Reading two headers - addr:0xd7400000 blocks:1 [0000.531] I> Addr: 0xd7400000, start-block: 58761224, num_blocks: 1 [0000.540] I> Binary(11) of size 107808 is loaded @ 0xd7400000 [0000.546] I> Copy BTCM section [0000.549] I> A/B: bin_type (13) slot 0 [0000.552] I> Loading partition cpu-bootloader at 0x96000000 [0000.558] I> Reading two headers - addr:0x96000000 blocks:1 [0000.563] I> Addr: 0x96000000, start-block: 58740744, num_blocks: 1 [0000.575] I> Binary(13) of size 277776 is loaded @ 0x96000000 [0000.580] I> A/B: bin_type (20) slot 0 [0000.584] I> Loading partition bootloader-dtb at 0x8520f400 [0000.589] I> Reading two headers - addr:0x8520f400 blocks:1 [0000.595] I> Addr: 0x8520f400, start-block: 58742792, num_blocks: 1 [0000.607] I> Binary(20) of size 356224 is loaded @ 0x8520f400 [0000.613] I> A/B: bin_type (14) slot 0 [0000.617] I> Loading partition secure-os at 0x8530f600 [0000.622] I> Reading two headers - addr:0x8530f600 blocks:1 [0000.627] I> Addr: 0x8530f600, start-block: 58744840, num_blocks: 1 [0000.639] I> Binary(14) of size 312752 is loaded @ 0x8530f600 [0000.646] I> TOS boot-params @ 0x85000000 [0000.650] I> TOS params prepared [0000.654] I> Loading EKS ... [0000.656] I> A/B: bin_type (15) slot 0 [0000.660] I> Loading partition eks at 0x8590f800 [0000.664] I> Reading two headers - addr:0x8590f800 blocks:1 [0000.670] I> Addr: 0x8590f800, start-block: 58757128, num_blocks: 1 [0000.678] I> Binary(15) of size 1040 is loaded @ 0x8590f800 [0000.683] I> EKB detected (length: 0x400) @ 0x8590f800 [0000.688] I> Copied encrypted keys [0000.692] I> boot profiler @ 0x275844000 [0000.696] I> boot profiler for TOS @ 0x275844000 [0000.700] I> Unhalting SCE [0000.703] I> Primary Memory Start:80000000 Size:70000000 [0000.708] I> Extended Memory Start:f0110000 Size:1856f0000 [0000.715] I> MB2(TBoot-BPMP) done NOTICE: BL31: v1.3(release):a28d87f09 NOTICE: BL31: Built : 21:15:42, Aug 12 2019 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! keystore-demo: 141: Hello world from keystore-demo app keystore-demo: 207: main: EKB contents match expected value exit called, thread 0xffffffffea87ad58, name trusty_app_2_7d18fc60-e9fc-11e8 platform_bootstrap_epilog: trusty bootstrap complete [0001.076] I> Welcome to Cboot [0001.079] I> Cboot Version: t186-dcb303f9 [0001.083] I> CPU-BL Params @ 0x275800000 [0001.087] I> 0) Base:0x00000000 Size:0x00000000 [0001.091] I> 1) Base:0x277f00000 Size:0x00100000 [0001.096] I> 2) Base:0x277e00000 Size:0x00100000 [0001.100] I> 3) Base:0x277d00000 Size:0x00100000 [0001.105] I> 4) Base:0x277c00000 Size:0x00100000 [0001.109] I> 5) Base:0x277b00000 Size:0x00100000 [0001.114] I> 6) Base:0x277800000 Size:0x00200000 [0001.118] I> 7) Base:0x277400000 Size:0x00400000 [0001.123] I> 8) Base:0x277a00000 Size:0x00100000 [0001.127] I> 9) Base:0x277300000 Size:0x00100000 [0001.132] I> 10) Base:0x276800000 Size:0x00800000 [0001.136] I> 11) Base:0x30000000 Size:0x00040000 [0001.141] I> 12) Base:0xf0000000 Size:0x00100000 [0001.145] I> 13) Base:0x30040000 Size:0x00001000 [0001.150] I> 14) Base:0x30048000 Size:0x00001000 [0001.154] I> 15) Base:0x30049000 Size:0x00001000 [0001.158] I> 16) Base:0x3004a000 Size:0x00001000 [0001.163] I> 17) Base:0x3004b000 Size:0x00001000 [0001.167] I> 18) Base:0x3004c000 Size:0x00001000 [0001.172] I> 19) Base:0x3004d000 Size:0x00001000 [0001.176] I> 20) Base:0x3004e000 Size:0x00001000 [0001.181] I> 21) Base:0x3004f000 Size:0x00001000 [0001.185] I> 22) Base:0x00000000 Size:0x00000000 [0001.189] I> 23) Base:0xf0100000 Size:0x00010000 [0001.194] I> 24) Base:0x00000000 Size:0x00000000 [0001.198] I> 25) Base:0x00000000 Size:0x00000000 [0001.203] I> 26) Base:0x00000000 Size:0x00000000 [0001.207] I> 27) Base:0x00000000 Size:0x00000000 [0001.212] I> 28) Base:0x84400000 Size:0x00400000 [0001.216] I> 29) Base:0x30000000 Size:0x00010000 [0001.220] I> 30) Base:0x278000000 Size:0x08000000 [0001.225] I> 31) Base:0x00000000 Size:0x00000000 [0001.229] I> 32) Base:0x276000000 Size:0x00600000 [0001.234] I> 33) Base:0x80000000 Size:0x70000000 [0001.238] I> 34) Base:0xf0110000 Size:0x1856f0000 [0001.243] I> 35) Base:0x00000000 Size:0x00000000 [0001.247] I> 36) Base:0x00000000 Size:0x00000000 [0001.252] I> 37) Base:0x2772e0000 Size:0x00020000 [0001.256] I> 38) Base:0x84000000 Size:0x00400000 [0001.261] I> 39) Base:0x96000000 Size:0x02000000 [0001.265] I> 40) Base:0x85000000 Size:0x01200000 [0001.270] I> 41) Base:0x275800000 Size:0x00500000 [0001.274] I> 42) Base:0x00000000 Size:0x00000000 [0001.278] I> 43) Base:0x00000000 Size:0x00000000 [0001.283] GIC-SPI Target CPU: 4 [0001.286] Interrupts Init done [0001.289] calling constructors [0001.293] initializing heap [0001.295] initializing threads [0001.298] initializing timers [0001.302] creating bootstrap completion thread [0001.306] top of bootstrap2() [0001.309] CPU: ARM Cortex A57 [0001.313] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100 [0001.318] initializing platform [0001.321] I> Boot-device: eMMC [0001.325] I> sdmmc bdev is already initialized [0001.331] I> Found 16 partitions in SDMMC_BOOT (instance 3) [0001.337] I> Found 31 partitions in SDMMC_USER (instance 3) [0001.342] W> opt-in fuse is not set, skip fuse_burning [0001.347] I> Reserved memory at 0xfbe00000 for U-Boot relocation [0001.353] W> No valid slot number is found in scratch register [0001.359] W> Return default slot: _a [0001.362] I> A/B: bin_type (21) slot 0 [0001.366] I> Loading partition kernel-dtb at 0x80000000 from device(0x1) [0001.379] I> Kernel_dtb @0x80000000 [0001.382] I> Bl_dtb @0x8520f400 [0001.385] I> gpio framework initialized [0001.392] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio' driver [0001.402] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio-aon' driver [0001.409] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee [0001.417] E> I2C: slave not found in slaves. [0001.421] E> I2C: Could not write 0 bytes to slave: 0x00ee with repeat start false. [0001.429] E> I2C_DEV: Failed to send register address 0x00000004. [0001.435] E> I2C_DEV: Could not write 1 registers of size 1 to slave 0xee at 0x00000004 via instance 0. [0001.444] E> tca9539_device_init: failed to write polar reg [0001.450] E> tegrabl_tca9539_init: failed to init device! [0001.455] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xe8 [0001.462] E> I2C: slave not found in slaves. [0001.466] E> I2C: Could not write 0 bytes to slave: 0x00e8 with repeat start false. [0001.474] E> I2C_DEV: Failed to send register address 0x00000004. [0001.479] E> I2C_DEV: Could not write 1 registers of size 1 to slave 0xe8 at 0x00000004 via instance 0. [0001.489] E> tca9539_device_init: failed to write polar reg [0001.494] E> tegrabl_tca9539_init: failed to init device! [0001.502] I> fixed regulator driver initialized [0001.534] I> register 'maxim' power off handle [0001.540] I> virtual i2c enabled [0001.543] I> registered 'maxim,max77620' pmic [0001.548] I> tegrabl_gpio_driver_register: register 'max77620-gpio' driver [0001.561] I> Find /i2c@c250000's alias i2c7 [0001.565] I> Reading eeprom i2c=7 address=0x50 [0001.594] I> Device at /i2c@c250000:0x50 [0001.598] I> Reading eeprom i2c=7 address=0x57 [0001.602] E> I2C: slave not found in slaves. [0001.607] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true. [0001.614] E> I2C_DEV: Failed to send register address 0x00000000. [0001.620] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 7. [0001.630] E> eeprom: Failed to read I2C slave device [0001.634] I> Eeprom read failed 0x3526070d [0001.639] I> Find /i2c@c240000's alias i2c1 [0001.643] I> Reading eeprom i2c=1 address=0x51 [0001.648] E> I2C: slave not found in slaves. [0001.652] E> I2C: Could not write 0 bytes to slave: 0x00a2 with repeat start true. [0001.660] E> I2C_DEV: Failed to send register address 0x00000000. [0001.666] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa2 at 0x00000000 via instance 1. [0001.675] E> eeprom: Retry to read I2C slave device. [0001.680] E> I2C: slave not found in slaves. [0001.684] E> I2C: Could not write 0 bytes to slave: 0x00a2 with repeat start true. [0001.692] E> I2C_DEV: Failed to send register address 0x00000000. [0001.698] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa2 at 0x00000000 via instance 1. [0001.707] E> eeprom: Failed to read I2C slave device [0001.712] I> Eeprom read failed 0x3526070d [0001.717] I> Find /i2c@3160000's alias i2c0 [0001.721] I> Reading eeprom i2c=0 address=0x50 [0001.725] E> I2C: slave not found in slaves. [0001.729] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0001.737] E> I2C_DEV: Failed to send register address 0x00000000. [0001.743] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 0. [0001.752] E> eeprom: Failed to read I2C slave device [0001.757] I> Eeprom read failed 0x3526070d [0001.762] I> Find /i2c@3180000's alias i2c2 [0001.766] I> Reading eeprom i2c=2 address=0x54 [0001.770] I> Enabling gpio chip_id = 2, gpio pin = 9 [0001.775] C> GPIO driver for chip_id 0x2 could not be found [0001.780] E> cam_eeprom_read: Can't get gpio driver [0001.785] I> Eeprom read failed 0x4d4d000d [0001.789] I> Reading eeprom i2c=2 address=0x57 [0001.793] I> Enabling gpio chip_id = 2, gpio pin = 9 [0001.798] C> GPIO driver for chip_id 0x2 could not be found [0001.803] E> cam_eeprom_read: Can't get gpio driver [0001.808] I> Eeprom read failed 0x4d4d000d [0001.812] I> create_pm_ids: id: 3310-1000-D01-B, len: 15 [0001.817] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.856] E> tegrabl_display_init_regulator: hdmi cable is not connected [0001.863] E> tegrabl_display_get_pdata, failed to parse dtb settings [0001.871] E> cannot find any other nvdisp nodes [0001.876] E> no valid display unit config found in dtb [0001.882] W> display init failed [0001.885] initializing target [0001.888] calling apps_init() [0001.891] starting app kernel_boot_app [0001.897] I> found decompressor handler: lz4-legacy [0001.901] I> decompressing BMP blob ... [0001.911] I> Kernel type = Normal [0001.915] I> Loading kernel from partition ... [0001.919] W> No valid slot number is found in scratch register [0001.925] W> Return default slot: _a [0001.928] I> A/B: bin_type (24) slot 0 [0001.933] I> Boot image size read from image header: f2d10 [0001.938] I> Boot image load address: 0x0x80400000 [0001.942] I> Loading partition kernel at 0x80400000 from device(0x1) [0002.704] I> Kernel hdr @0x80400000 [0002.707] I> Kernel dtb @0x80000000 [0002.711] I> T18x: Authenticate boot.img (bin_type 24), max size 0x4000000 [0002.719] I> T18x: Authenticate tegra194-p2888-0001-p2822-0000.dtb (bin_type 21), max size 0x100000 [0002.728] I> Checking boot.img header magic ... [0002.732] I> [OK] [0002.734] I> Valid boot.img @ 0x80400000 [0002.738] I> decompressor handler not found [0002.742] I> Copying kernel image (477378 bytes) from 0x80400800 to 0x80800000 ... [0002.749] I> Done [0002.751] I> Move ramdisk (len: 0) from 0x80475800 to 0x94830000 [0002.758] I> Updated bpmp info to DTB [0002.764] I> Ramdisk: Base: 0x94830000; Size: 0x0 [0002.768] I> Updated initrd info to DTB [0002.772] W> WARN: Fail to override "console=none" in commandline [0002.778] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0002.785] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0002.792] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0002.799] I> disabled_core_mask: 0xffffff0c [0002.803] W> No valid slot number is found in scratch register [0002.809] W> Return default slot: _a [0002.812] I> Active slot suffix: [0002.816] I> add_boot_slot_suffix: slot_suffix = [0002.820] I> Linux Cmdline: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2031647.1 bl_prof_dataptr=0x10000@0x275840000 sdhci_tegra.en_boot_part_access=1 [0002.857] I> Updated bootarg info to DTB [0002.860] I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:c6:2d:20 [0002.867] I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:c6:2d:21 [0002.873] I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:c6:2d:22 [0002.881] E> Found no plugin manager ids in source DT [0002.886] W> Add plugin manager ids from board info [0002.890] E> "plugin-manager" doesn't exist, creating [0002.895] E> "ids" doesn't exist, creating [0002.899] E> "connection" doesn't exist, creating [0002.904] E> "configs" doesn't exist, creating [0002.908] I> create_pm_ids: id: 3310-1000-D01-B, len: 15 [0002.913] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.924] I> Adding plugin-manager/ids/3310-1000-D01=/i2c@c250000:module@0x50 [0002.931] E> "i2c@c250000" doesn't exist, creating [0002.936] E> "module@0x50" doesn't exist, creating [0002.943] I> Adding plugin-manager/ids/3310-1000-D01-B [0002.949] I> Adding plugin-manager/configs/3310-mem-type 00 [0002.955] I> Adding plugin-manager/configs/3310-power-config 00 [0002.961] I> Adding plugin-manager/configs/3310-misc-config 00 [0002.966] I> Adding plugin-manager/configs/3310-modem-config 00 [0002.972] I> Adding plugin-manager/configs/3310-touch-config 00 [0002.978] I> Adding plugin-manager/configs/3310-display-config 00 [0002.984] I> Adding plugin-manager/cvm [0002.988] E> "chip-id" doesn't exist, creating [0002.993] I> Adding plugin-manager/chip-id/A02P [0002.997] E> "odm-data" doesn't exist, creating [0003.002] I> Adding /chosen/plugin-manager/odm-data [0003.011] I> added [base:0x80000000, size:0x70000000] to /memory [0003.017] I> added [base:0xf0200000, size:0x185600000] to /memory [0003.023] I> added [base:0x275e00000, size:0x200000] to /memory [0003.028] I> added [base:0x276600000, size:0x200000] to /memory [0003.034] I> added [base:0x277000000, size:0x200000] to /memory [0003.040] I> Updated memory info to DTB [0003.044] E> add_disp_param: failed to get display params for du=0 [0003.052] E> "reset" doesn't exist, creating [0003.056] E> "pmc-reset-reason" doesn't exist, creating [0003.061] E> "pmic-reset-reason" doesn't exist, creating [0003.068] I> Adding ecid(000000016450b8881c0000000afb0340) to DT [0003.073] I> disabled_core_mask: 0xffffff0c [0003.085] I> Add serial number:0424118099568 as DT property [0003.093] I> Plugin-manager override starting [0003.099] I> node /plugin-manager/fragement@0 matches [0003.109] I> node /plugin-manager/fragement@4 matches [0003.121] I> node /plugin-manager/fragment-sdwake-p3310-1000-300 matches [0003.140] I> node /plugin-manager/fragement-pmon-p3310-1000-300 matches [0003.149] I> node /plugin-manager/fragement-pmon-p3310-1000-800 matches [0003.157] I> node /plugin-manager/fragment-devslp@0 matches [0003.171] I> node /plugin-manager/fragment-p3310-c00-comm matches [0003.184] I> node /plugin-manager/fragment-p3310-c00-pmic matches [0003.194] I> node /plugin-manager/fragment-p3310-c01 matches [0003.207] I> node /plugin-manager/fragment-p3310-c03 matches [0003.234] I> Disable plugin-manager status in FDT [0003.239] I> Plugin-manager override finished successfully [0003.244] I> tegrabl_load_kernel_and_dtb: Done [0003.248] E> tegrabl_display_clear: display is not initialized [0003.254] W> Boot logo display failed... [0003.258] I> Kernel EP: 0x80800000, DTB: 0x80000000 U-Boot 2016.07-gd917e08cec (Aug 12 2019 - 21:16:16 -0700) TEGRA186 Model: NVIDIA P2771-0000-500 DRAM: 7.8 GiB MC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: eth0: ethernet@2490000 Hit any key to stop autoboot: 2  1  0 MMC: no card present switch to partitions #0, OK mmc0(part 0) is current device Scanning mmc 0:1... Found /boot/extlinux/extlinux.conf Retrieving file: /boot/extlinux/extlinux.conf 727 bytes read in 124 ms (4.9 KiB/s) L4T boot options 1: primary kernel Enter choice: 1: primary kernel Retrieving file: /boot/initrd 5565090 bytes read in 216 ms (24.6 MiB/s) Retrieving file: /boot/Image 34742280 bytes read in 871 ms (38 MiB/s) append: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2031647.1 bl_prof_dataptr=0x10000@0x275840000 sdhci_tegra.en_boot_part_access=1 ## Flattened Device Tree blob at 80000000 Booting using the fdt blob at 0x80000000 reserving fdt memory region: addr=80000000 size=10000 Using Device Tree in place at 0000000080000000, end 0000000080053a7c Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.9.140-tegra (alfredo@gohan) (gcc version 7.4.0 (Ubuntu/Linaro 7.4.0-1ubuntu1~18.04.1) ) #1 SMP PREEMPT Fri Nov 1 10:42:24 -03 2019 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 16416, [ 0.000000] OF: fdt: - 80000000 , 70000000 [ 0.000000] OF: fdt: - f0200000 , 185600000 [ 0.000000] OF: fdt: - 275e00000 , 200000 [ 0.000000] OF: fdt: - 276600000 , 200000 [ 0.000000] OF: fdt: - 277000000 , 200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fc000000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 25 pages/cpu @ffffffc1f676a000 s61592 r8192 d32616 u102400 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2022968 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2031647.1 bl_prof_dataptr=0x10000@0x275840000 sdhci_tegra.en_boot_part_access=1 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 29508(90%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 7968844K/8220672K available (15294K kernel code, 2952K rwdata, 7076K rodata, 8576K init, 621K bss, 186292K reserved, 65536K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f70000 ( 15296 KB) [ 0.000000] .rodata : 0xffffff8008f70000 - 0xffffff8009660000 ( 7104 KB) [ 0.000000] .init : 0xffffff8009660000 - 0xffffff8009ec0000 ( 8576 KB) [ 0.000000] .data : 0xffffff8009ec0000 - 0xffffff800a1a2008 ( 2953 KB) [ 0.000000] .bss : 0xffffff800a1a2008 - 0xffffff800a23d77c ( 622 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf07dc8000 ( 125 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc1f7200000 ( 8050 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000003] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.009580] Console: colour dummy device 80x25 [ 0.014241] console [tty0] enabled [ 0.017798] bootconsole [uart8250] disabled [ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.9.140-tegra (alfredo@gohan) (gcc version 7.4.0 (Ubuntu/Linaro 7.4.0-1ubuntu1~18.04.1) ) #1 SMP PREEMPT Fri Nov 1 10:42:24 -03 2019 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 16416, [ 0.000000] OF: fdt: - 80000000 , 70000000 [ 0.000000] OF: fdt: - f0200000 , 185600000 [ 0.000000] OF: fdt: - 275e00000 , 200000 [ 0.000000] OF: fdt: - 276600000 , 200000 [ 0.000000] OF: fdt: - 277000000 , 200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fc000000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 25 pages/cpu @ffffffc1f676a000 s61592 r8192 d32616 u102400 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2022968 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2031647.1 bl_prof_dataptr=0x10000@0x275840000 sdhci_tegra.en_boot_part_access=1 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 29508(90%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 7968844K/8220672K available (15294K kernel code, 2952K rwdata, 7076K rodata, 8576K init, 621K bss, 186292K reserved, 65536K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f70000 ( 15296 KB) [ 0.000000] .rodata : 0xffffff8008f70000 - 0xffffff8009660000 ( 7104 KB) [ 0.000000] .init : 0xffffff8009660000 - 0xffffff8009ec0000 ( 8576 KB) [ 0.000000] .data : 0xffffff8009ec0000 - 0xffffff800a1a2008 ( 2953 KB) [ 0.000000] .bss : 0xffffff800a1a2008 - 0xffffff800a23d77c ( 622 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf07dc8000 ( 125 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc1f7200000 ( 8050 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000003] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.009580] Console: colour dummy device 80x25 [ 0.014241] console [tty0] enabled [ 0.017798] bootconsole [uart8250] disabled [ 0.022173] kmemleak: Kernel memory leak detector disabled [ 0.022190] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.022204] pid_max: default: 32768 minimum: 301 [ 0.022523] Security Framework initialized [ 0.022686] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.022696] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.023292] ftrace: allocating 47217 entries in 185 pages [ 0.148370] sched-energy: Sched-energy-costs installed from DT [ 0.148390] ASID allocator initialised with 65536 entries [ 0.183445] tegra-id: chipid=21817. [ 0.183461] tegra-id: opt_subrevision=1. [ 0.183483] Tegra Revision: A02p SKU: 0xdc CPU Process: 0 SoC Process: 0 [ 0.183496] DTS File Name: /l/disk0/alfredo/nvidia/nvidia_sdk/JetPack_4.2.2_Linux_GA_P3310/Linux_for_Tegra/sources/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/quill/kernel-dts/tegra186-quill-p3310-1000-c03-00-base.dts [ 0.183516] DTB Build time: Nov 5 2019 11:28:49 [ 0.230021] CPU1: Booted secondary processor [4e0f0030] [ 0.261651] CPU2: Booted secondary processor [4e0f0030] [ 0.293440] CPU3: Booted secondary processor [411fd073] [ 0.325433] CPU4: Booted secondary processor [411fd073] [ 0.357427] CPU5: Booted secondary processor [411fd073] [ 0.357481] Brought up 6 CPUs [ 0.357528] SMP: Total of 6 processors activated. [ 0.357542] CPU features: detected feature: 32-bit EL0 Support [ 0.358349] CPU: All CPU(s) started at EL2 [ 0.358411] alternatives: patching kernel code [ 0.367929] devtmpfs: initialized [ 0.401140] Initilizing CustomIPI irq domain [ 0.401374] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.401400] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.402239] pinctrl core: initialized pinctrl subsystem [ 0.402455] OS set in device tree is not L4T. [ 0.402619] regulator-dummy: no parameters [ 0.402783] Initializing plugin-manager [ 0.402847] Plugin module not found [ 0.402892] Plugin-manager status disabled [ 0.404342] NET: Registered protocol family 16 [ 0.405002] pstore: using zlib compression [ 0.405424] console [pstore-1] enabled [ 0.405436] pstore: Registered ramoops as persistent store backend [ 0.405449] ramoops: attached 0x200000@0x275880000, ecc: 0/0 [ 0.421033] cpuidle: using governor menu [ 0.422520] bpmp: waiting for handshake [ 0.422538] bpmp: handshake completed [ 0.422561] bpmp: synchronizing channels [ 0.422578] bpmp: channels synchronized [ 0.422591] bpmp: mail init ok [ 0.424656] arm-smmu 12000000.iommu: probing hardware configuration... [ 0.424675] arm-smmu 12000000.iommu: SMMUv2 with: [ 0.424690] arm-smmu 12000000.iommu: stage 1 translation [ 0.424703] arm-smmu 12000000.iommu: stage 2 translation [ 0.424715] arm-smmu 12000000.iommu: nested translation [ 0.424731] arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80 [ 0.424750] arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)! [ 0.424769] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 0.424784] arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA [ 0.424798] arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA [ 0.426540] vdso: 2 pages (1 code @ ffffff8008f77000, 1 data @ ffffff8009ec4000) [ 0.426571] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.429184] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.430640] Registering BPMP clocks... [ 0.430743] tegra_bpmp_clk_init: clock init ok (638 clks) [ 0.432758] tegra_powergate_init: DONE [ 0.432781] DTS File Name: /l/disk0/alfredo/nvidia/nvidia_sdk/JetPack_4.2.2_Linux_GA_P3310/Linux_for_Tegra/sources/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/quill/kernel-dts/tegra186-quill-p3310-1000-c03-00-base.dts [ 0.432815] DTB Build time: Nov 5 2019 11:28:49 [ 0.434616] Tegra reboot handler registered. [ 0.435965] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.436040] tegra-pmc: get_secure_pmc_setting: done secure_pmc=0 [ 0.436064] tegra-pmc: ### PMC reset source: TEGRA_SOFTWARE_RESET [ 0.436078] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L1 [ 0.436090] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.436258] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.436285] tegra-pmc c360000.pmc: IO padctrl driver initialized [ 0.436622] iommu: Adding device 3460000.sdhci to group 0 [ 0.437306] iommu: Adding device 3400000.sdhci to group 1 [ 0.438399] iommu: Adding device 3507000.ahci-sata to group 2 [ 0.438426] arm-smmu: forcing sodev map for 3507000.ahci-sata [ 0.438877] iommu: Adding device 3160000.i2c to group 3 [ 0.439316] iommu: Adding device c240000.i2c to group 4 [ 0.439669] iommu: Adding device 3180000.i2c to group 5 [ 0.440019] iommu: Adding device 3190000.i2c to group 6 [ 0.440460] iommu: Adding device 31b0000.i2c to group 7 [ 0.440802] iommu: Adding device 31c0000.i2c to group 8 [ 0.441148] iommu: Adding device c250000.i2c to group 9 [ 0.441517] iommu: Adding device 31e0000.i2c to group 10 [ 0.443009] iommu: Adding device 3210000.spi to group 11 [ 0.443358] iommu: Adding device c260000.spi to group 12 [ 0.443699] iommu: Adding device 3240000.spi to group 13 [ 0.444393] iommu: Adding device 3100000.serial to group 14 [ 0.444747] iommu: Adding device 3110000.serial to group 15 [ 0.445085] iommu: Adding device c280000.serial to group 16 [ 0.445451] iommu: Adding device 3130000.serial to group 17 [ 0.446805] iommu: Adding device 2490000.ether_qos to group 18 [ 0.446829] arm-smmu: forcing sodev map for 2490000.ether_qos [ 0.447517] iommu: Adding device b000000.rtcpu to group 19 [ 0.449717] iommu: Adding device 13e10000.host1x to group 20 [ 0.450031] iommu: Adding device 13e10000.host1x:ctx0 to group 21 [ 0.450350] iommu: Adding device 13e10000.host1x:ctx1 to group 22 [ 0.450675] iommu: Adding device 13e10000.host1x:ctx2 to group 23 [ 0.450985] iommu: Adding device 13e10000.host1x:ctx3 to group 24 [ 0.451294] iommu: Adding device 13e10000.host1x:ctx4 to group 25 [ 0.451605] iommu: Adding device 13e10000.host1x:ctx5 to group 26 [ 0.451930] iommu: Adding device 13e10000.host1x:ctx6 to group 27 [ 0.452244] iommu: Adding device 13e10000.host1x:ctx7 to group 28 [ 0.452718] iommu: Adding device 150c0000.nvcsi to group 29 [ 0.453376] iommu: Adding device 15700000.vi to group 30 [ 0.453764] iommu: Adding device 15600000.isp to group 31 [ 0.454240] iommu: Adding device 15220000.nvdisplay to group 32 [ 0.454843] iommu: Adding device 15340000.vic to group 33 [ 0.455079] iommu: Adding device 154c0000.nvenc to group 34 [ 0.455302] iommu: Adding device 15480000.nvdec to group 35 [ 0.455654] iommu: Adding device 15380000.nvjpg to group 36 [ 0.455890] iommu: Adding device 15500000.tsec to group 37 [ 0.456110] iommu: Adding device 15100000.tsecb to group 38 [ 0.456653] iommu: Adding device 15810000.se to group 39 [ 0.456888] iommu: Adding device 15820000.se to group 40 [ 0.457113] iommu: Adding device 15830000.se to group 41 [ 0.457337] iommu: Adding device 15840000.se to group 42 [ 0.458232] iommu: Adding device smmu_test to group 43 [ 0.458839] mc: mapped MMIO address: 0xffffff800a740000 -> 0x2c10000 [ 0.458863] mc: mapped MMIO address: 0xffffff800a760000 -> 0x2c20000 [ 0.458884] mc: mapped MMIO address: 0xffffff800a780000 -> 0x2c30000 [ 0.458904] mc: mapped MMIO address: 0xffffff800a7a0000 -> 0x2c40000 [ 0.458923] mc: mapped MMIO address: 0xffffff800a7c0000 -> 0x2c50000 [ 0.458942] nv-tegra-mc 2c10000.mc: No mssnvlink node [ 0.458963] mc-err: mcerr ops are set to t18x [ 0.459119] dram-ecc: DRAM ECC disabled-MC_ECC_CONTROL:0x0000000c [ 0.460220] iommu: Adding device 3530000.xhci to group 44 [ 0.460246] arm-smmu: forcing sodev map for 3530000.xhci [ 0.460943] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3 [ 0.460961] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256 [ 0.461568] iommu: Adding device 17000000.gp10b to group 45 [ 0.462608] tegra-reset 5000000.clock: registered 193 resets. [ 0.464823] iommu: Adding device d000000.bpmp to group 46 [ 0.465039] bpmp: ping status is 0 [ 0.465142] bpmp d000000.bpmp: firmware tag is 4208eb5c85fe47a2235fbc0b8eb87dca [ 0.467393] bpmp d000000.bpmp: probe ok [ 0.470552] iommu: Adding device 2600000.dma to group 47 [ 0.471792] GPIO line 424 (wifi-enable) hogged as output/high [ 0.471833] GPIO line 445 (sdmmc-wake-support-input) hogged as input [ 0.471870] GPIO line 446 (sdmmc-wake-support-output) hogged as output/low [ 0.472069] gpiochip_setup_dev: registered GPIOs 320 to 511 on device: gpiochip0 (tegra-gpio) [ 0.475835] GPIO line 315 (wifi-wake-ap) hogged as input [ 0.476013] gpiochip_setup_dev: registered GPIOs 256 to 319 on device: gpiochip1 (tegra-gpio-aon) [ 0.477647] iommu: Adding device 10003000.pcie-controller to group 48 [ 0.477675] arm-smmu: forcing sodev map for 10003000.pcie-controller [ 0.478011] iommu: Adding device sound to group 49 [ 0.478379] iommu: Adding device 3510000.hda to group 50 [ 0.485788] iommu: Adding device c1a0000.aon to group 51 [ 0.486228] vdd-ac-bat: 5000 mV [ 0.487885] vdd-1v8-ap: 1800 mV [ 0.517660] random: fast init done [ 0.526953] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.533033] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.533633] SCSI subsystem initialized [ 0.534163] usbcore: registered new interface driver usbfs [ 0.534254] usbcore: registered new interface driver hub [ 0.534385] usbcore: registered new device driver usb [ 0.551670] max77620 4-003c: PMIC Version OTP:0x45 and ES:0x8 [ 0.557854] vddio-ddr: at 1125 mV [ 0.561692] avdd_dsi_csi: 1200 mV [ 0.565035] vdd-1v8: 1800 mV [ 0.569051] vdd-3v3-sys: 3300 mV [ 0.570193] spmic-ldo0: at 1800 mV [ 0.570913] spmic-ldo1: at 800 mV [ 0.573034] vddio-3v3: 3300 mV [ 0.573645] vddio-sdmmc1: 1800 <--> 3300 mV at 3300 mV [ 0.577037] vdd-rtc: at 800 mV [ 0.577797] avdd-ts-hv: 1800 <--> 3300 mV at 1800 mV [ 0.581035] spmic-ldo6: at 1500 mV [ 0.585035] vdd-pex-1v00: 1000 mV [ 0.585669] dvdd-pex: 1000 mV [ 0.587869] GPIO line 253 (spmic_gpio_input) hogged as input [ 0.588032] GPIO line 254 (spmic_gpio_input) hogged as input [ 0.588229] gpiochip_setup_dev: registered GPIOs 248 to 255 on device: gpiochip2 (max77620-gpio) [ 0.588437] max77620 4-003c: max77620 probe successful [ 0.588894] media: Linux media interface: v0.10 [ 0.588934] Linux video capture interface: v2.00 [ 0.592643] pps_core: LinuxPPS API ver. 1 registered [ 0.592660] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.592688] PTP clock support registered [ 0.593120] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.593148] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.595449] tegra_fiq_debugger_init: found FIQ source (IRQ 384) [ 0.599940] trusty trusty: trusty version: Built: 21:17:07 Aug 12 2019 [ 0.599969] trusty trusty: selected api version: 3 (requested 3) [ 0.601357] Advanced Linux Sound Architecture Driver Initialized. [ 0.602030] Bluetooth: Core ver 2.22 [ 0.602113] NET: Registered protocol family 31 [ 0.602172] Bluetooth: HCI device and connection manager initialized [ 0.602223] Bluetooth: HCI socket layer initialized [ 0.602281] Bluetooth: L2CAP socket layer initialized [ 0.602338] Bluetooth: SCO socket layer initialized [ 0.603419] en-vdd-sd: 3300 mV [ 0.603974] vdd-usb0-5v: 5000 mV [ 0.604379] vdd-usb1-5v: 5000 mV [ 0.605068] vdd-3v3: 3300 mV [ 0.605472] en-vdd-vcm-2v8: 2800 mV [ 0.605929] vdd-sys-bl: 3300 mV [ 0.609228] camchar: rtcpu character device driver loaded [ 0.610033] gpio tegra-gpio wake53 for gpio=159(X:7) [ 0.612011] extcon-gpio-states external-connection:extcon@1: Cable state:1, cable id:1 [ 0.613428] clocksource: Switched to clocksource arch_sys_counter [ 0.653809] VFS: Disk quotas dquot_6.6.0 [ 0.654079] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.654707] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.655685] nvmap: nvmap_select_cache_ops() nvmap cache ops set to roc [ 0.655741] nvmap_page_pool_init: Total RAM pages: 2008595 [ 0.655784] nvmap_page_pool_init: nvmap page pool size: 251074 pages (980 MB) [ 0.655987] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.660202] tegra-gpcdma 2600000.dma: GPC DMA driver register 32 channels [ 0.672272] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type BCPU-therm [ 0.672516] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type MCPU-therm [ 0.672985] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.673145] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.673331] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type Tboard_tegra [ 0.673576] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type Tdiode_tegra [ 0.673836] thermal thermal_zone6: Registering thermal zone thermal_zone6 for type PMIC-Die [ 0.674130] la/ptsa driver initialized. [ 0.674175] pre_t19x_iso_plat_init(): iso emc max clk=1866000KHz [ 0.674233] pre_t19x_iso_plat_init(): max_iso_bw=26870400KB [ 0.675404] NET: Registered protocol family 2 [ 0.677550] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.678170] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.678983] TCP: Hash tables configured (established 65536 bind 65536) [ 0.679069] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.679224] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.680079] NET: Registered protocol family 1 [ 0.681264] RPC: Registered named UNIX socket transport module. [ 0.681305] RPC: Registered udp transport module. [ 0.681336] RPC: Registered tcp transport module. [ 0.681365] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.681694] Trying to unpack rootfs image as initramfs... [ 0.871415] Freeing initrd memory: 5432K [ 0.894223] host1x 13e10000.host1x: initialized [ 0.896298] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.901166] audit: initializing netlink subsys (disabled) [ 0.901251] audit: type=2000 audit(0.784:1): initialized [ 0.902097] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.915153] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.918019] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.919700] 9p: Installing v9fs 9p2000 file system support [ 0.926012] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.926221] io scheduler noop registered [ 0.926874] io scheduler cfq registered (default) [ 0.931890] gic 2a41000.agic-controller: GIC IRQ controller registered [ 1.053598] iommu: Adding device aconnect@2a41000:adsp_audio to group 52 [ 1.093125] iommu: Adding device 2993000.adsp to group 53 [ 1.094408] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 1.098228] tegra-xusb-padctl 3520000.xusb_padctl: VBUS over-current detection enabled [ 1.103008] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.104630] tegra-pwm 3290000.pwm: PWM clk can sleep in ops [ 1.106064] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 1.107440] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.110768] tegra-pcie 10003000.pcie-controller: 2x1, 1x1, 1x1 configuration [ 1.111952] tegra-pcie 10003000.pcie-controller: PCIE: Enable power rails [ 1.112427] tegra-pcie 10003000.pcie-controller: probing port 0, using 2 lanes [ 1.112840] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 1.113137] misc tegra_camera_ctrl: tegra_camera_isomgr_register tpg_max_iso = 3916800KBs [ 1.113191] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=4687500, vi_iso_bw=2000000, max_bw=4687500 [ 1.115708] tegra-pcie 10003000.pcie-controller: probing port 1, using 1 lanes [ 1.117036] tsec 15500000.tsec: initialized [ 1.118211] tsec 15100000.tsecb: initialized [ 1.121276] nvdec 15480000.nvdec: initialized [ 1.127169] falcon 15340000.vic: initialized [ 1.128822] falcon 154c0000.nvenc: initialized [ 1.130245] falcon 15380000.nvjpg: initialized [ 1.132239] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56) [ 1.133687] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57) [ 1.135112] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58) [ 1.136553] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59) [ 1.137989] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60) [ 1.139392] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61) [ 1.140799] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62) [ 1.142227] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63) [ 1.145784] tegradccommon 15200000.dc_common: host1x channel mapped [ 1.145834] tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated [ 1.145926] tegradccommon 15200000.dc_common: dma mapping done [ 1.146722] tegradc 15220000.nvdisplay: disp0 connected to head2->/host1x/sor [ 1.146782] generic_infoframe_type: 0x87 [ 1.146875] tegradc 15220000.nvdisplay: DT parsed successfully [ 1.146910] tegradc 15220000.nvdisplay: Display dc.ffffff800aca0000 registered with id=0 [ 1.152036] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 16727000 KB/s [ 1.152059] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 665600000 Hz [ 1.152077] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 357620000 Hz [ 1.152254] tegradc 15220000.nvdisplay: vblank syncpt # 8 for dc 2 [ 1.152272] tegradc 15220000.nvdisplay: vpulse3 syncpt # 9 for dc 2 [ 1.159799] tegradc 15220000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board [ 1.159824] tegradc 15220000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 1.164582] tegradc 15220000.nvdisplay: probed [ 1.166309] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 32 channels [ 1.167365] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized [ 1.168257] kfuse 3830000.kfuse: initialized [ 1.171706] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 1.176809] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.177264] Console: switching to colour frame buffer device 80x30 [ 1.177577] tegradc 15220000.nvdisplay: fb registered [ 1.177936] gpio tegra-gpio wake19 for gpio=120(P:0) [ 1.180168] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 1.180477] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 1.189146] console [ttyS0] disabled [ 1.189244] 3100000.serial: ttyS0 at MMIO 0x3100000 (irq = 36, base_baud = 25500000) is a Tegra [ 1.189335] Parent Clock set for DC plld3 [ 1.192984] edid invalid [ 1.193929] tegradc 15220000.nvdisplay: hdmi: tmds rate:25200K prod-setting:prod_c_hdmi_0m_54m [ 1.195444] tegradc 15220000.nvdisplay: hdmi: get RGB quant from EDID. [ 1.195453] tegradc 15220000.nvdisplay: hdmi: get YCC quant from EDID. [ 1.231962] extcon-disp-state external-connection:disp-state: cable 46 state 1 [ 1.231967] Extcon AUX0(HDMI) enable [ 1.722384] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 2.130193] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 2.537124] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 2.539158] tegra-pcie 10003000.pcie-controller: link 0 down, ignoring [ 2.678276] tegra-pcie 10003000.pcie-controller: PCI host bridge to bus 0000:00 [ 2.678285] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 2.678291] pci_bus 0000:00: root bus resource [mem 0x40100000-0x47ffffff] [ 2.678297] pci_bus 0000:00: root bus resource [mem 0x48000000-0x7fffffff pref] [ 2.678304] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.678754] iommu: Adding device 0000:00:02.0 to group 54 [ 2.678765] arm-smmu: forcing sodev map for 0000:00:02.0 [ 2.678871] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 2.679806] iommu: Adding device 0000:01:00.0 to group 55 [ 2.679812] arm-smmu: forcing sodev map for 0000:01:00.0 [ 2.689719] pci 0000:00:02.0: BAR 14: assigned [mem 0x40100000-0x401fffff] [ 2.689730] pci 0000:01:00.0: BAR 0: assigned [mem 0x40100000-0x40103fff 64bit] [ 2.689766] pci 0000:00:02.0: PCI bridge to [bus 01] [ 2.689778] pci 0000:00:02.0: bridge window [mem 0x40100000-0x401fffff] [ 2.690166] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt [ 2.690171] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.546939] tegradc 15220000.nvdisplay: blank - powerdown [ 3.549498] console [ttyS0] enabled [ 3.551596] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 37, base_baud = 0) is a TEGRA_UART [ 3.552866] c280000.serial: ttyTHS2 at MMIO 0xc280000 (irq = 38, base_baud = 0) is a TEGRA_UART [ 3.553145] serial-tegra 3130000.serial: RX in PIO mode [ 3.554203] 3130000.serial: ttyTHS3 at MMIO 0x3130000 (irq = 39, base_baud = 0) is a TEGRA_UART [ 3.555496] [drm] Initialized [ 3.582429] brd: module loaded [ 3.587650] loop: module loaded [ 3.587755] tegra_profiler: version: 1.135, samples/io: 47/26 [ 3.587890] tegra_profiler: auth: init [ 3.588121] extcon-disp-state external-connection:disp-state: cable 46 state 0 [ 3.588125] Extcon AUX0(HDMI) disable [ 3.588607] nct1008_nct72 7-004c: starting parse dt [ 3.588711] nct1008_nct72 7-004c: !!!Found deprecated property!!! [ 3.588717] nct1008_nct72 7-004c: success parsing dt [ 3.588861] THERMAL EST: found 3 subdevs [ 3.588865] THERMAL EST num_resources: 0 [ 3.588870] [THERMAL EST subdev 0] [ 3.588875] [THERMAL EST subdev 1] [ 3.588880] [THERMAL EST subdev 2] [ 3.588904] nct1008_nct72 7-004c: success in enabling tmp451 VDD rail [ 3.589167] thermal thermal_zone7: Registering thermal zone thermal_zone7 for type thermal-fan-est [ 3.589171] THERMAL EST: thz register success. [ 3.593379] THERMAL EST: end of probe, return err: 0 [ 3.594600] hisi_sas: driver version v1.6 [ 3.595429] nvme nvme0: pci function 0000:01:00.0 [ 3.595482] nvme 0000:01:00.0: enabling device (0000 -> 0002) [ 3.599421] tegra-ahci 3507000.ahci-sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode [ 3.599431] tegra-ahci 3507000.ahci-sata: flags: 64bit ncq sntf pm led pmp pio slum part deso sadm apst [ 3.604783] scsi host0: tegra_ahci [ 3.609926] scsi host1: tegra_ahci [ 3.610123] ata1: SATA max UDMA/133 mmio [mem 0x03507000-0x03508fff] port 0x100 irq 24 [ 3.610128] ata2: DUMMY [ 3.612331] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 3.614360] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 3.618990] libphy: Fixed MDIO Bus: probed [ 3.620033] tun: Universal TUN/TAP device driver, 1.6 [ 3.620037] tun: (C) 1999-2004 Max Krasnyansky [ 3.621016] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 3.621019] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 3.621074] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 3.621077] igb: Copyright (c) 2007-2014 Intel Corporation. [ 3.621127] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 3.621130] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 3.621183] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4 [ 3.621186] Copyright(c) 1999 - 2017 Intel Corporation. [ 3.621476] nct1008_nct72 7-004c: LOC shutdown limit 107 [ 3.621995] nct1008_nct72 7-004c: EXT shutdown limit 107 [ 3.623139] eqos 2490000.ether_qos: can't get pllrefe_vcoout clk (-2) [ 3.627628] eqos 2490000.ether_qos: Setting local MAC: 0 4 4b c6 2d 22 [ 3.627784] libphy: dwc_phy: probed [ 3.628225] bcm54xx_low_power_mode(): put phy in iddq-lp mode [ 3.630683] PPP generic driver version 2.4.2 [ 3.630909] PPP BSD Compression module registered [ 3.630914] PPP Deflate Compression module registered [ 3.630938] PPP MPPE Compression module registered [ 3.630944] NET: Registered protocol family 24 [ 3.631002] usbcore: registered new interface driver r8152 [ 3.631045] usbcore: registered new interface driver asix [ 3.631088] usbcore: registered new interface driver ax88179_178a [ 3.631127] usbcore: registered new interface driver cdc_ether [ 3.631162] usbcore: registered new interface driver net1080 [ 3.631197] usbcore: registered new interface driver cdc_subset [ 3.631232] usbcore: registered new interface driver zaurus [ 3.631280] usbcore: registered new interface driver cdc_ncm [ 3.631458] VFIO - User Level meta-driver version: 0.3 [ 3.637324] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.637366] ehci-pci: EHCI PCI platform driver [ 3.637398] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.637452] ohci-pci: OHCI PCI platform driver [ 3.637492] ohci-platform: OHCI generic platform driver [ 3.644111] usb3: Requested PHY is disabled [ 3.644567] tegra-xusb 3530000.xhci: No USB port has OTG_CAP [ 3.647393] tegradc 15220000.nvdisplay: unblank [ 3.648221] usbcore: registered new interface driver uas [ 3.648364] usbcore: registered new interface driver usb-storage [ 3.648569] usbcore: registered new interface driver usbserial [ 3.649230] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 3.649354] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 3.649518] tegra-xusb 3530000.xhci: Firmware timestamp: 2018-12-26 10:30:04 UTC, Version: 55.12 release [ 3.652453] mousedev: PS/2 mouse device common for all mice [ 3.652587] usbcore: registered new interface driver xpad [ 3.654746] nct1008_nct72 7-004c: initial LOC temp: 33000 [ 3.655059] nct1008_nct72 7-004c: initial EXT temp: 45500 [ 3.655572] Parent Clock set for DC plld3 [ 3.655682] nct1008_nct72 7-004c: hi_b:-11, lo_b:0 [ 3.655994] gpio tegra-gpio-aon wake35 for gpio=16(V:0) [ 3.656180] nct1008_nct72 7-004c: nct1008_probe: initialized [ 3.659642] tegradc 15220000.nvdisplay: hdmi: tmds rate:85500K prod-setting:prod_c_hdmi_54m_111m [ 3.661038] tegradc 15220000.nvdisplay: hdmi: get RGB quant from EDID. [ 3.661048] tegradc 15220000.nvdisplay: hdmi: get YCC quant from EDID. [ 3.697039] extcon-disp-state external-connection:disp-state: cable 46 state 1 [ 3.697043] Extcon AUX0(HDMI) enable [ 3.705488] tegra-xusb 3530000.xhci: xHCI Host Controller [ 3.705507] tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 1 [ 3.706357] tegra-xusb 3530000.xhci: hcc params 0x0184fd25 hci version 0x100 quirks 0x00050810 [ 3.706400] tegra-xusb 3530000.xhci: irq 69, io mem 0x03530000 [ 3.706670] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.706677] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.706681] usb usb1: Product: xHCI Host Controller [ 3.706686] usb usb1: Manufacturer: Linux 4.9.140-tegra xhci-hcd [ 3.706690] usb usb1: SerialNumber: 3530000.xhci [ 3.707189] hub 1-0:1.0: USB hub found [ 3.707238] hub 1-0:1.0: 4 ports detected [ 3.707655] tegra-xusb 3530000.xhci: xHCI Host Controller [ 3.707666] tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 2 [ 3.707900] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 3.707905] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.707909] usb usb2: Product: xHCI Host Controller [ 3.707913] usb usb2: Manufacturer: Linux 4.9.140-tegra xhci-hcd [ 3.707917] usb usb2: SerialNumber: 3530000.xhci [ 3.708355] hub 2-0:1.0: USB hub found [ 3.708394] hub 2-0:1.0: 3 ports detected [ 3.783122] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 3.784548] Wake73 for irq=42 [ 3.785786] rtc rtc1: alarm rtc device [ 3.785832] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ 3.785859] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.786041] i2c /dev entries driver [ 3.788185] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 3.794191] parse_throttle_dt_data: Num cap clks = 4 [ 3.794196] parse_throttle_dt_data: clk=mcpu type=1 [ 3.794200] parse_throttle_dt_data: clk=bcpu type=2 [ 3.794209] parse_throttle_dt_data: clk=gpu type=4 [ 3.794212] parse_throttle_dt_data: clk=emc type=3 [ 3.795646] tegra_throttle_probe: probe successful. #cdevs=4 [ 3.796224] FAN: coudln't get the regulator [ 3.798126] device-mapper: uevent: version 1.0.3 [ 3.798977] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 3.803838] cpufreq: platform driver Initialization: pass [ 3.804511] cpuidle: Initializing cpuidle driver init for Denver cluster [ 3.804626] cpuidle: Initializing cpuidle driver init for A57 cluster [ 3.805519] sdhci: Secure Digital Host Controller Interface driver [ 3.805521] sdhci: Copyright(c) Pierre Ossman [ 3.805523] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.806996] sdhci-tegra 3460000.sdhci: Client registration for eMC Successful [ 3.808969] CMDQ: cmdq_platfm_init successful [ 3.810173] CQE: CMD_TIMING bit set for R1B DCMD [ 3.810528] sdhci-tegra 3440000.sdhci: Client registration for eMC Successful [ 3.813176] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 3.813359] sdhci-tegra 3400000.sdhci: Got WP GPIO [ 3.817608] sdhci-tegra 3400000.sdhci: Client registration for eMC Successful [ 3.819530] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 255 [ 3.824171] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.825127] tegra-se-nvhost 15810000.se: initialized [ 3.826151] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 3.827042] tegra-se-nvhost 15820000.se: initialized [ 3.827941] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 3.828637] tegra-se-nvhost 15830000.se: initialized [ 3.829395] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 3.830005] tegra-se-nvhost 15840000.se: initialized [ 3.830979] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 3.831209] hidraw: raw HID events driver (C) Jiri Kosina [ 3.832323] usbcore: registered new interface driver usbhid [ 3.832326] usbhid: USB HID core driver [ 3.836894] tegra186-cam-rtcpu b000000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 3.839269] tegra-ivc ivc-b000000.rtcpu: region 0: iova=0xbfef0000-0xbfefdb7f size=56192 [ 3.839526] tegra-ivc ivc-b000000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 3.839643] tegra-ivc ivc-b000000.rtcpu:i2c@480: i2c: ver=0 grp=1 RX[8x128]=0x1900-0x1d80 TX[8x128]=0x1d80-0x2200 [ 3.839834] tegra-ivc ivc-b000000.rtcpu:vinotify@12c0: vinotify: ver=0 grp=1 RX[64x128]=0x2200-0x4280 TX[64x128]=0x4280-0x6300 [ 3.840529] tegra-ivc ivc-b000000.rtcpu:mods@32c0: mods: ver=0 grp=1 RX[1x64]=0x6300-0x63c0 TX[1x64]=0x63c0-0x6480 [ 3.840599] tegra-ivc ivc-b000000.rtcpu:ivccontrol@52c0: ivccontrol: ver=0 grp=1 RX[16x320]=0x6480-0x7900 TX[16x320]=0x7900-0x8d80 [ 3.840649] tegra-ivc ivc-b000000.rtcpu:ivccapture@72c0: ivccapture: ver=0 grp=1 RX[16x64]=0x8d80-0x9200 TX[16x64]=0x9200-0x9680 [ 3.840695] tegra-ivc ivc-b000000.rtcpu:dbg@7c00: dbg: ver=0 grp=1 RX[1x384]=0x9680-0x9880 TX[1x384]=0x9880-0x9a80 [ 3.840790] tegra-ivc ivc-b000000.rtcpu:dbg@7e00: dbg: ver=0 grp=1 RX[1x8192]=0x9a80-0xbb00 TX[1x8192]=0xbb00-0xdb80 [ 3.841143] tegra186-cam-rtcpu b000000.rtcpu: using cam RTCPU IRQ (51) [ 3.841144] tegra186-cam-rtcpu b000000.rtcpu: tegra_camrtc_mon_create is successful [ 3.842238] tegra186-cam-rtcpu b000000.rtcpu: firmware version cpu=sce cmd=5 sha1=3ecb1dca25fa98771f988f238c025334776c9a96 [ 3.843873] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 3.844450] tegra186-aondbg aondbg: aondbg driver probe() OK [ 3.844646] register_ari_mca_banks: Registered MCA ROC:IOB [ 3.844725] register_ari_mca_banks: Registered MCA ROC:CCE [ 3.845047] tegra18-bridge 2390000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 3.845052] tegra18-bridge 2390000.axi2apb: enabled timeout = 11155000 [ 3.845054] tegra18-bridge 2390000.axi2apb: bridge probed OK [ 3.845116] tegra18-bridge 23a0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 3.845120] tegra18-bridge 23a0000.axi2apb: enabled timeout = 11155000 [ 3.845122] tegra18-bridge 23a0000.axi2apb: bridge probed OK [ 3.845179] tegra18-bridge 23b0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 3.845182] tegra18-bridge 23b0000.axi2apb: enabled timeout = 11155000 [ 3.845184] tegra18-bridge 23b0000.axi2apb: bridge probed OK [ 3.845241] tegra18-bridge 23c0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 3.845244] tegra18-bridge 23c0000.axi2apb: enabled timeout = 11155000 [ 3.845246] tegra18-bridge 23c0000.axi2apb: bridge probed OK [ 3.845305] tegra18-bridge 23d0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 3.845308] tegra18-bridge 23d0000.axi2apb: enabled timeout = 11155000 [ 3.845310] tegra18-bridge 23d0000.axi2apb: bridge probed OK [ 3.845369] tegra18-bridge 2100000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 3.845375] tegra18-bridge 2100000.axip2p: enabled timeout = 11155000 [ 3.845377] tegra18-bridge 2100000.axip2p: bridge probed OK [ 3.845488] tegra18-bridge 2110000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 3.845494] tegra18-bridge 2110000.axip2p: enabled timeout = 11155000 [ 3.845497] tegra18-bridge 2110000.axip2p: bridge probed OK [ 3.845586] tegra18-bridge 2120000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 3.845591] tegra18-bridge 2120000.axip2p: enabled timeout = 11155000 [ 3.845594] tegra18-bridge 2120000.axip2p: bridge probed OK [ 3.845657] tegra18-bridge 2130000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 3.845662] tegra18-bridge 2130000.axip2p: enabled timeout = 11155000 [ 3.845665] tegra18-bridge 2130000.axip2p: bridge probed OK [ 3.845722] tegra18-bridge 2140000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 3.845725] tegra18-bridge 2140000.axip2p: enabled timeout = 11155000 [ 3.845728] tegra18-bridge 2140000.axip2p: bridge probed OK [ 3.845795] tegra18-bridge 2150000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 3.845801] tegra18-bridge 2150000.axip2p: enabled timeout = 11155000 [ 3.845803] tegra18-bridge 2150000.axip2p: bridge probed OK [ 3.845859] tegra18-bridge 2160000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 3.845865] tegra18-bridge 2160000.axip2p: enabled timeout = 11155000 [ 3.845868] tegra18-bridge 2160000.axip2p: bridge probed OK [ 3.845927] tegra18-bridge 2170000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 3.845932] tegra18-bridge 2170000.axip2p: enabled timeout = 11155000 [ 3.845935] tegra18-bridge 2170000.axip2p: bridge probed OK [ 3.845993] tegra18-bridge 2180000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 3.845999] tegra18-bridge 2180000.axip2p: enabled timeout = 11155000 [ 3.846001] tegra18-bridge 2180000.axip2p: bridge probed OK [ 3.846056] tegra18-bridge 2190000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 3.846061] tegra18-bridge 2190000.axip2p: enabled timeout = 11155000 [ 3.846063] tegra18-bridge 2190000.axip2p: bridge probed OK [ 3.846123] tegra18_a57_serr_init: on CPU 1 a Denver Core [ 3.846186] tegra18x_actmon d230000.actmon: in actmon_register()... [ 3.846797] tegra18x_actmon d230000.actmon: initialization Completed for the device mc_all [ 3.847187] hw perfevents: enabled with denver15_uncore_pmu PMU driver, 3 counters available [ 3.847298] denver_knobs_init:MTS_VERSION:43068234 [ 3.848228] nvadsp 2993000.adsp: in probe()... [ 3.849129] nvadsp 2993000.adsp: nvadsp_app_module_probe [ 3.851358] nvpmodel: initialized successfully [ 3.852285] trusty-virtio trusty:virtio: initializing [ 3.852391] trusty_ipc virtio0: vring0: va(pa) ffffffc1e67da000(0) qsz 32 notifyid 1 [ 3.852398] trusty_ipc virtio0: vring1: va(pa) ffffffc1eb3c0000(0) qsz 32 notifyid 2 [ 3.852461] trusty-virtio trusty:virtio: initializing done [ 3.852549] trusty_ipc virtio0: is online [ 3.853450] mmc1: SDHCI controller on 3440000.sdhci [3440000.sdhci] using ADMA 64-bit with 64 bit addr [ 3.853456] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit with 64 bit addr [ 3.854115] usbcore: registered new interface driver snd-usb-audio [ 3.865492] gpio tegra-gpio wake71 for gpio=125(P:5) [ 3.865544] mmc2: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit with 64 bit addr [ 3.869007] input: tegra-hda HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input0 [ 3.869121] input: tegra-hda HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input1 [ 3.899026] mmc0: mmc_decode_ext_csd: CMDQ supported: depth: 31, cmdq_support: 1 [ 3.913324] mmc0: periodic cache flush enabled [ 3.913339] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 3.914030] mmcblk0: mmc0:0001 032G34 29.1 GiB [ 3.918351] mmcblk0boot0: mmc0:0001 032G34 partition 1 4.00 MiB [ 3.918613] mmcblk0boot1: mmc0:0001 032G34 partition 2 4.00 MiB [ 3.918827] mmcblk0rpmb: mmc0:0001 032G34 partition 3 4.00 MiB [ 3.919767] OPE platform probe [ 3.919825] OPE platform probe successful [ 3.922078] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 [ 3.924203] ata1: SATA link down (SStatus 0 SControl 300) [ 3.968238] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 3.968337] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 3.968426] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 3.968510] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 3.968592] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 3.968680] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 3.968763] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 3.968844] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 3.968930] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 3.969012] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 3.969123] tegra-asoc: sound: ADMAIF11 <-> ADMAIF11 mapping ok [ 3.969219] tegra-asoc: sound: ADMAIF12 <-> ADMAIF12 mapping ok [ 3.969298] tegra-asoc: sound: ADMAIF13 <-> ADMAIF13 mapping ok [ 3.969384] tegra-asoc: sound: ADMAIF14 <-> ADMAIF14 mapping ok [ 3.969519] tegra-asoc: sound: ADMAIF15 <-> ADMAIF15 mapping ok [ 3.969603] tegra-asoc: sound: ADMAIF16 <-> ADMAIF16 mapping ok [ 3.969683] tegra-asoc: sound: ADMAIF17 <-> ADMAIF17 mapping ok [ 3.969767] tegra-asoc: sound: ADMAIF18 <-> ADMAIF18 mapping ok [ 3.969848] tegra-asoc: sound: ADMAIF19 <-> ADMAIF19 mapping ok [ 3.969930] tegra-asoc: sound: ADMAIF20 <-> ADMAIF20 mapping ok [ 4.008153] u32 classifier [ 4.008156] Actions configured [ 4.008244] Initializing XFRM netlink socket [ 4.010453] NET: Registered protocol family 10 [ 4.011751] NET: Registered protocol family 17 [ 4.011762] NET: Registered protocol family 15 [ 4.011967] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.012043] Bluetooth: RFCOMM socket layer initialized [ 4.012057] Bluetooth: RFCOMM ver 1.11 [ 4.012062] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.012069] Bluetooth: HIDP socket layer initialized [ 4.012089] 9pnet: Installing 9P2000 support [ 4.012133] Key type dns_resolver registered [ 4.013206] Registered cp15_barrier emulation handler [ 4.014226] Registered setend emulation handler [ 4.018138] registered taskstats version 1 [ 4.022343] isp 15600000.isp: initialized [ 4.027278] nvcsi 150c0000.nvcsi: initialized [ 4.034879] usb 1-2: new low-speed USB device number 2 using tegra-xusb [ 4.034928] tegra-vi4 15700000.vi: initialized [ 4.035390] gpio tegra-gpio-aon wake29 for gpio=56(FF:0) [ 4.035458] gpio tegra-gpio-aon wake67 for gpio=57(FF:1) [ 4.035522] gpio tegra-gpio-aon wake68 for gpio=58(FF:2) [ 4.035632] input: gpio-keys as /devices/gpio-keys/input/input2 [ 4.059703] usb 1-2: New USB device found, idVendor=413c, idProduct=2005 [ 4.059708] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.059712] usb 1-2: Product: DELL USB Keyboard [ 4.059714] usb 1-2: Manufacturer: DELL [ 4.063752] input: DELL DELL USB Keyboard as /devices/3530000.xhci/usb1/1-2/1-2:1.0/0003:413C:2005.0001/input/input3 [ 4.066208] tegra_rtc c2a0000.rtc: setting system clock to 2000-01-01 01:00:37 UTC (946688437) [ 4.067853] mmcblk mmc0:0001: Card claimed for testing. [ 4.100651] mmc1: hw tuning done ... [ 4.107451] bpmp: mounted debugfs mirror [ 4.108398] mmc1: new ultra high speed SDR104 SDIO card at address 0001 [ 4.109964] bwmgr: missing cdev-type property [ 4.115152] spmic-ldo0: disabling [ 4.115348] spmic-ldo1: disabling [ 4.115511] en-vdd-sd: disabling [ 4.115513] vdd-usb0-5v: disabling [ 4.115515] vdd-usb1-5v: disabling [ 4.115517] vdd-3v3: disabling [ 4.115520] en-vdd-vcm-2v8: disabling [ 4.115523] vdd-sys-bl: disabling [ 4.115525] ALSA device list: [ 4.115533] #0: tegra-hda at 0x3518000 irq 381 [ 4.115535] #1: tegra-snd-t186ref-mobile-rt565x [ 4.121952] hid-generic 0003:413C:2005.0001: input,hidraw0: USB HID v1.10 Keyboard [DELL DELL USB Keyboard] on usb-3530000.xhci-2/input0 [ 4.793425] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 4.816673] usb 1-3: New USB device found, idVendor=04f3, idProduct=249f [ 4.816676] usb 1-3: New USB device strings: Mfr=4, Product=14, SerialNumber=0 [ 4.816678] usb 1-3: Product: Touchscreen [ 4.816680] usb 1-3: Manufacturer: ELAN [ 4.824312] input: ELAN Touchscreen as /devices/3530000.xhci/usb1/1-3/1-3:1.0/0003:04F3:249F.0002/input/input4 [ 4.824575] hid-multitouch 0003:04F3:249F.0002: input,hidraw1: USB HID v1.10 Device [ELAN Touchscreen] on usb-3530000.xhci-3/input0 [ 6.827758] Wake76 for irq=199 [ 6.827761] Wake77 for irq=199 [ 6.827763] Wake78 for irq=199 [ 6.827764] Wake79 for irq=199 [ 6.827766] Wake80 for irq=199 [ 6.827767] Wake81 for irq=199 [ 6.827769] Wake82 for irq=199 [ 6.827800] tegra-xusb 3530000.xhci: Upgrade port 0 to USB3.0 [ 6.827804] tegra-xusb 3530000.xhci: Upgrade port 1 to USB3.0 [ 6.933641] usb usb2: usb_suspend_both: status 0 [ 7.975930] extcon-disp-state external-connection:disp-state: cable 40 state 1 [ 7.977571] Freeing unused kernel memory: 8576K [ 7.989899] Extcon HDMI: HPD enabled [ 7.989937] tegradc 15220000.nvdisplay: hdmi: plugged [ 8.024419] L4T-INITRD Build DATE: Sat Jan 1 01:00:41 UTC 2000 [ 8.039349] Root device found: mmcblk0p1 [ 8.046751] Found dev node: /dev/mmcblk0p1 [ 8.410365] EXT4-fs (mmcblk0p1): 16 orphan inodes deleted [ 8.416771] EXT4-fs (mmcblk0p1): recovery complete [ 8.429139] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 8.439717] Rootfs mounted over mmcblk0p1 [ 8.467445] Switching from initrd to actual rootfs [ 8.585969] systemd[1]: System time before build time, advancing clock. [ 8.634071] ip_tables: (C) 2000-2006 Netfilter Core Team [ 8.685941] cgroup: cgroup2: unknown option "nsdelegate" [ 8.709940] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 8.736660] systemd[1]: Detected architecture arm64. [ 8.838129] systemd[1]: Set hostname to . [ 8.930183] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 8.949706] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 9.155783] random: systemd: uninitialized urandom read (16 bytes read) [ 9.163852] systemd[1]: Reached target Swap. [ 9.171658] random: systemd: uninitialized urandom read (16 bytes read) [ 9.182806] systemd[1]: Created slice User and Session Slice. [ 9.191325] random: systemd: uninitialized urandom read (16 bytes read) [ 9.199571] systemd[1]: Reached target User and Group Name Lookups. [ 9.210227] systemd[1]: Created slice System Slice. [ 9.217928] systemd[1]: Reached target Slices. [ 9.311126] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 9.347675] gpio tegra-gpio-aon wake30 for gpio=60(FF:4) [ 9.469032] random: crng init done [ 9.473460] random: 7 urandom warning(s) missed due to ratelimiting [ 9.635051] systemd-journald[2234]: Received request to flush runtime journal from PID 1 [ 10.344119] tegra-vi4 15700000.vi: Entity type for entity adv7180 6-0021 was not initialized! [ 11.918146] CPU1: shutdown [ 11.994344] CPU2: shutdown [ 12.541453] vdd-1v8: voltage operation not allowed [ 12.541467] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 12.561619] vdd-1v8: voltage operation not allowed [ 12.561626] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 12.582440] vdd-1v8: voltage operation not allowed [ 12.582447] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 12.584837] vdd-1v8: voltage operation not allowed [ 12.584843] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 12.686320] vdd-1v8: voltage operation not allowed [ 12.686334] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 12.687250] vdd-1v8: voltage operation not allowed [ 12.687260] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 12.688815] vdd-1v8: voltage operation not allowed [ 12.688823] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) Ubuntu 18.04.2 LTS nvidia-desktop ttyS0 nvidia-desktop login: nvidia Password: Last login: ter nov 5 10:52:57 -03 2019 on ttyS0 Welcome to Ubuntu 18.04.2 LTS (GNU/Linux 4.9.140-tegra aarch64) * Documentation: https://help.ubuntu.com * Management: https://landscape.canonical.com * Support: https://ubuntu.com/advantage This system has been minimized by removing packages and content that are not required on a system that users do not log into. To restore this content, you can run the 'unminimize' command. 233 pacotes podem ser atualizados. 111 atualizações são atualizações de segurança. nvidia@nvidia-desktop:~$ sudo rebootcat /dev/media0 lsmod sudo modprobe v4l2-tpgdmesg |grep adv |grep advlsnvargus-daemon lsmodsudo modprobe adv7180lssudo modprobe adv7180lsmod Module Size Used by bnep 19270 2 fuse 120203 3 zram 30209 6 overlay 54926 0 bcmdhd 985053 0 cfg80211 727800 1 bcmdhd adv7180 15652 1 nvgpu 1724375 18 bluedroid_pm 16187 0 ip_tables 21421 0 x_tables 38144 1 ip_tables nvidia@nvidia-desktop:~$ lsmodsudo rebootcat /dev/media0 lsmod sudo modprobe v4l2-tpgdmesg |grep advlsnvargus-daemon lsmodsudo modprobe adv7180lssudo rebootrebootsudo vi extlinux.conf lsvi extlinux.conf lscd extlinux/lscd /boot/lsresizexresizelscd /etc/lsvi /boot/exlinux/exlinux.confdmesg |grep -i advvi /boot/exlinux/exlinux.conflscd /etc/lscd /etc/lsvi /boot/exlinux/exlinux.confdmesg |grep -i adv [ 0.601357] Advanced Linux Sound Architecture Driver Initialized. [ 8.585969] systemd[1]: System time before build time, advancing clock. [ 10.322591] adv7180 6-0021: chip found @ 0x21 (31c0000.i2c) [ 10.344113] tegra-vi4 15700000.vi: subdev adv7180 6-0021 bound [ 10.344119] tegra-vi4 15700000.vi: Entity type for entity adv7180 6-0021 was not initialized! nvidia@nvidia-desktop:~$ ls /dev/vimedia0 /dev/media0 nvidia@nvidia-desktop:~$ ls /dev/media0 dmesg |grep -i advlsmodsudo rebootcat /dev/media0 lsmod sudo modprobe v4l2-tpgdmesg |grep advlsnvargus-daemon ls[0017.101] E> Blob is not set [0017.661] I> Welcome to MB2(TBoot-BPMP) Recovery(version: 01.00.160913-t186-M-00.00-mobile-bc98f182) [0017.671] I> bit @ 0xd480000 [0017.674] I> Boot-device: eMMC [0017.698] I> sdmmc DDR50 mode [0017.702] I> sdmmc bdev is already initialized [0017.707] I> pmic: reset reason (nverc) : 0x40 [0017.714] I> Found 16 partitions in SDMMC_BOOT (instance 3) [0017.721] I> Found 31 partitions in SDMMC_USER (instance 3) [0017.730] I> Binary(16) of size 533504 is loaded @ 0xd7800000 [0017.738] I> Binary(17) of size 465840 is loaded @ 0xd798e440 [0017.917] I> Copy BTCM section [0017.921] I> Binary(13) of size 202912 is loaded @ 0x96000000 [0017.929] I> Binary(20) of size 322272 is loaded @ 0x8520f400 [0017.936] I> Binary(14) of size 312752 is loaded @ 0x8530f600 [0017.944] I> TOS boot-params @ 0x85000000 [0017.948] I> TOS params prepared [0017.951] I> Loading EKS ... [0017.954] I> Binary(15) of size 1040 is loaded @ 0x8590f800 [0017.959] I> EKB detected (length: 0x400) @ 0x8590f800 [0017.964] I> Copied encrypted keys [0017.968] I> boot profiler @ 0x275844000 [0017.972] I> boot profiler for TOS @ 0x275844000 [0017.977] I> Unhalting SCE [0017.979] I> Primary Memory Start:80000000 Size:70000000 [0017.985] I> Extended Memory Start:f0110000 Size:1856f0000 [0017.991] I> MB2(TBoot-BPMP) Recovery done NOTICE: BL31: v1.3(release):a28d87f09 NOTICE: BL31: Built : 21:15:42, Aug 12 2019 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! keystore-demo: 141: Hello world from keystore-demo app keystore-demo: 207: main: EKB contents match expected value exit called, thread 0xffffffffea87ad58, name trusty_app_2_7d18fc60-e9fc-11e8 platform_bootstrap_epilog: trusty bootstrap complete [0018.354] I> Welcome to TBoot-CPU Recovery(version: 01.00.160913-t186-M-00.00-mobile-b6c9c72e) [0018.362] I> gpio framework initialized [0018.366] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio' driver [0018.373] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio-aon' driver [0018.381] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee [0018.388] E> I2C: slave not found in slaves. [0018.392] E> I2C: Could not write 0 bytes to slave: 0x00ee with repeat start false. [0018.400] E> I2C_DEV: Failed to send register address 0x00000004. [0018.406] E> I2C_DEV: Could not write 1 registers of size 1 to slave 0xee at 0x00000004 via instance 0. [0018.415] E> tca9539_device_init: failed to write polar reg [0018.420] E> tegrabl_tca9539_init: failed to init device! [0018.425] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xe8 [0018.431] E> I2C: slave not found in slaves. [0018.435] E> I2C: Could not write 0 bytes to slave: 0x00e8 with repeat start false. [0018.443] E> I2C_DEV: Failed to send register address 0x00000004. [0018.449] E> I2C_DEV: Could not write 1 registers of size 1 to slave 0xe8 at 0x00000004 via instance 0. [0018.458] E> tca9539_device_init: failed to write polar reg [0018.464] E> tegrabl_tca9539_init: failed to init device! [0018.469] I> CPU: ARM Cortex A57 [0018.472] I> CPU: MIDR: 0x411fd073, MPIDR: 0x80000100 [0018.477] I> L2 ECC enabled : yes [0018.480] I> CPU-BL Params @ 0x275800000 [0018.484] I> 0) Base:0x00000000 Size:0x00000000 [0018.488] I> 1) Base:0x277f00000 Size:0x00100000 [0018.493] I> 2) Base:0x277e00000 Size:0x00100000 [0018.497] I> 3) Base:0x277d00000 Size:0x00100000 [0018.502] I> 4) Base:0x277c00000 Size:0x00100000 [0018.506] I> 5) Base:0x277b00000 Size:0x00100000 [0018.511] I> 6) Base:0x277800000 Size:0x00200000 [0018.515] I> 7) Base:0x277400000 Size:0x00400000 [0018.520] I> 8) Base:0x277a00000 Size:0x00100000 [0018.524] I> 9) Base:0x277300000 Size:0x00100000 [0018.529] I> 10) Base:0x276800000 Size:0x00800000 [0018.533] I> 11) Base:0x30000000 Size:0x00040000 [0018.538] I> 12) Base:0xf0000000 Size:0x00100000 [0018.542] I> 13) Base:0x30040000 Size:0x00001000 [0018.547] I> 14) Base:0x30048000 Size:0x00001000 [0018.551] I> 15) Base:0x30049000 Size:0x00001000 [0018.556] I> 16) Base:0x3004a000 Size:0x00001000 [0018.560] I> 17) Base:0x3004b000 Size:0x00001000 [0018.565] I> 18) Base:0x3004c000 Size:0x00001000 [0018.569] I> 19) Base:0x3004d000 Size:0x00001000 [0018.573] I> 20) Base:0x3004e000 Size:0x00001000 [0018.578] I> 21) Base:0x3004f000 Size:0x00001000 [0018.582] I> 22) Base:0x00000000 Size:0x00000000 [0018.587] I> 23) Base:0xf0100000 Size:0x00010000 [0018.591] I> 24) Base:0x00000000 Size:0x00000000 [0018.596] I> 25) Base:0x00000000 Size:0x00000000 [0018.600] I> 26) Base:0x00000000 Size:0x00000000 [0018.604] I> 27) Base:0x00000000 Size:0x00000000 [0018.609] I> 28) Base:0x84400000 Size:0x00400000 [0018.613] I> 29) Base:0x30000000 Size:0x00010000 [0018.618] I> 30) Base:0x278000000 Size:0x08000000 [0018.622] I> 31) Base:0x00000000 Size:0x00000000 [0018.627] I> 32) Base:0x276000000 Size:0x00600000 [0018.631] I> 33) Base:0x80000000 Size:0x70000000 [0018.636] I> 34) Base:0xf0110000 Size:0x1856f0000 [0018.640] I> 35) Base:0x00000000 Size:0x00000000 [0018.645] I> 36) Base:0x00000000 Size:0x00000000 [0018.649] I> 37) Base:0x2772e0000 Size:0x00020000 [0018.654] I> 38) Base:0x84000000 Size:0x00400000 [0018.658] I> 39) Base:0x96000000 Size:0x02000000 [0018.662] I> 40) Base:0x85000000 Size:0x01200000 [0018.667] I> 41) Base:0x275800000 Size:0x00500000 [0018.671] I> 42) Base:0x00000000 Size:0x00000000 [0018.676] I> 43) Base:0x00000000 Size:0x00000000 [0018.680] I> Boot-device: eMMC [0018.705] I> sdmmc DDR50 mode [0018.709] I> sdmmc bdev is already initialized [0018.715] I> Found 16 partitions in SDMMC_BOOT (instance 3) [0018.721] I> Found 31 partitions in SDMMC_USER (instance 3) [0018.726] I> bl dtb load address = @0x8520f400 [0018.731] I> Recovery boot_type: 0 [0018.738] I> fixed regulator driver initialized [0018.779] I> register 'maxim' power off handle [0018.786] I> virtual i2c enabled [0018.789] I> registered 'maxim,max77620' pmic [0018.794] I> tegrabl_gpio_driver_register: register 'max77620-gpio' driver [0018.800] I> Entering 3p server [0018.803] I> SUPER SPEED [0019.336] I> USB configuration success [0019.785] I> Writing kernel-dtb partition. [0019.808] I> Rebooting : reset-coldboot [0000.198] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-1b8ce67c) [0000.206] I> bit @ 0xd480000 [0000.209] I> Boot-device: eMMC [0000.213] I> sdmmc bdev is already initialized [0000.217] I> pmic: reset reason (nverc) : 0x0 [0000.224] I> Found 16 partitions in SDMMC_BOOT (instance 3) [0000.232] I> Found 31 partitions in SDMMC_USER (instance 3) [0000.238] I> A/B: bin_type (16) slot 0 [0000.241] I> Loading partition bpmp-fw at 0xd7800000 [0000.246] I> Reading two headers - addr:0xd7800000 blocks:1 [0000.252] I> Addr: 0xd7800000, start-block: 58777608, num_blocks: 1 [0000.267] I> Binary(16) of size 533504 is loaded @ 0xd7800000 [0000.272] I> A/B: bin_type (17) slot 0 [0000.276] I> Loading partition bpmp-fw-dtb at 0xd79f0000 [0000.281] I> Reading two headers - addr:0xd79f0000 blocks:1 [0000.287] I> Addr: 0xd79f0000, start-block: 58780024, num_blocks: 1 [0000.300] I> Binary(17) of size 465840 is loaded @ 0xd798e200 [0000.479] I> Loading SCE-FW ... [0000.482] I> A/B: bin_type (12) slot 0 [0000.486] I> Loading partition sce-fw at 0xd7300000 [0000.491] I> Reading two headers - addr:0xd7300000 blocks:1 [0000.496] I> Addr: 0xd7300000, start-block: 58782024, num_blocks: 1 [0000.506] I> Binary(12) of size 125168 is loaded @ 0xd7300000 [0000.511] I> Init SCE [0000.514] I> Loading APE-FW ... [0000.517] I> A/B: bin_type (11) slot 0 [0000.520] I> Loading partition adsp-fw at 0xd7400000 [0000.525] I> Reading two headers - addr:0xd7400000 blocks:1 [0000.531] I> Addr: 0xd7400000, start-block: 58761224, num_blocks: 1 [0000.540] I> Binary(11) of size 107808 is loaded @ 0xd7400000 [0000.546] I> Copy BTCM section [0000.549] I> A/B: bin_type (13) slot 0 [0000.552] I> Loading partition cpu-bootloader at 0x96000000 [0000.558] I> Reading two headers - addr:0x96000000 blocks:1 [0000.563] I> Addr: 0x96000000, start-block: 58740744, num_blocks: 1 [0000.575] I> Binary(13) of size 277776 is loaded @ 0x96000000 [0000.580] I> A/B: bin_type (20) slot 0 [0000.584] I> Loading partition bootloader-dtb at 0x8520f400 [0000.589] I> Reading two headers - addr:0x8520f400 blocks:1 [0000.595] I> Addr: 0x8520f400, start-block: 58742792, num_blocks: 1 [0000.607] I> Binary(20) of size 356224 is loaded @ 0x8520f400 [0000.613] I> A/B: bin_type (14) slot 0 [0000.617] I> Loading partition secure-os at 0x8530f600 [0000.622] I> Reading two headers - addr:0x8530f600 blocks:1 [0000.627] I> Addr: 0x8530f600, start-block: 58744840, num_blocks: 1 [0000.639] I> Binary(14) of size 312752 is loaded @ 0x8530f600 [0000.647] I> TOS boot-params @ 0x85000000 [0000.651] I> TOS params prepared [0000.654] I> Loading EKS ... [0000.656] I> A/B: bin_type (15) slot 0 [0000.660] I> Loading partition eks at 0x8590f800 [0000.664] I> Reading two headers - addr:0x8590f800 blocks:1 [0000.670] I> Addr: 0x8590f800, start-block: 58757128, num_blocks: 1 [0000.678] I> Binary(15) of size 1040 is loaded @ 0x8590f800 [0000.683] I> EKB detected (length: 0x400) @ 0x8590f800 [0000.688] I> Copied encrypted keys [0000.692] I> boot profiler @ 0x275844000 [0000.696] I> boot profiler for TOS @ 0x275844000 [0000.701] I> Unhalting SCE [0000.703] I> Primary Memory Start:80000000 Size:70000000 [0000.708] I> Extended Memory Start:f0110000 Size:1856f0000 [0000.715] I> MB2(TBoot-BPMP) done NOTICE: BL31: v1.3(release):a28d87f09 NOTICE: BL31: Built : 21:15:42, Aug 12 2019 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! keystore-demo: 141: Hello world from keystore-demo app keystore-demo: 207: main: EKB contents match expected value exit called, thread 0xffffffffea87ad58, name trusty_app_2_7d18fc60-e9fc-11e8 platform_bootstrap_epilog: trusty bootstrap complete [0001.076] I> Welcome to Cboot [0001.079] I> Cboot Version: t186-dcb303f9 [0001.083] I> CPU-BL Params @ 0x275800000 [0001.087] I> 0) Base:0x00000000 Size:0x00000000 [0001.091] I> 1) Base:0x277f00000 Size:0x00100000 [0001.096] I> 2) Base:0x277e00000 Size:0x00100000 [0001.100] I> 3) Base:0x277d00000 Size:0x00100000 [0001.105] I> 4) Base:0x277c00000 Size:0x00100000 [0001.109] I> 5) Base:0x277b00000 Size:0x00100000 [0001.114] I> 6) Base:0x277800000 Size:0x00200000 [0001.118] I> 7) Base:0x277400000 Size:0x00400000 [0001.123] I> 8) Base:0x277a00000 Size:0x00100000 [0001.127] I> 9) Base:0x277300000 Size:0x00100000 [0001.132] I> 10) Base:0x276800000 Size:0x00800000 [0001.136] I> 11) Base:0x30000000 Size:0x00040000 [0001.141] I> 12) Base:0xf0000000 Size:0x00100000 [0001.145] I> 13) Base:0x30040000 Size:0x00001000 [0001.150] I> 14) Base:0x30048000 Size:0x00001000 [0001.154] I> 15) Base:0x30049000 Size:0x00001000 [0001.159] I> 16) Base:0x3004a000 Size:0x00001000 [0001.163] I> 17) Base:0x3004b000 Size:0x00001000 [0001.167] I> 18) Base:0x3004c000 Size:0x00001000 [0001.172] I> 19) Base:0x3004d000 Size:0x00001000 [0001.176] I> 20) Base:0x3004e000 Size:0x00001000 [0001.181] I> 21) Base:0x3004f000 Size:0x00001000 [0001.185] I> 22) Base:0x00000000 Size:0x00000000 [0001.190] I> 23) Base:0xf0100000 Size:0x00010000 [0001.194] I> 24) Base:0x00000000 Size:0x00000000 [0001.198] I> 25) Base:0x00000000 Size:0x00000000 [0001.203] I> 26) Base:0x00000000 Size:0x00000000 [0001.207] I> 27) Base:0x00000000 Size:0x00000000 [0001.212] I> 28) Base:0x84400000 Size:0x00400000 [0001.216] I> 29) Base:0x30000000 Size:0x00010000 [0001.221] I> 30) Base:0x278000000 Size:0x08000000 [0001.225] I> 31) Base:0x00000000 Size:0x00000000 [0001.229] I> 32) Base:0x276000000 Size:0x00600000 [0001.234] I> 33) Base:0x80000000 Size:0x70000000 [0001.238] I> 34) Base:0xf0110000 Size:0x1856f0000 [0001.243] I> 35) Base:0x00000000 Size:0x00000000 [0001.247] I> 36) Base:0x00000000 Size:0x00000000 [0001.252] I> 37) Base:0x2772e0000 Size:0x00020000 [0001.256] I> 38) Base:0x84000000 Size:0x00400000 [0001.261] I> 39) Base:0x96000000 Size:0x02000000 [0001.265] I> 40) Base:0x85000000 Size:0x01200000 [0001.270] I> 41) Base:0x275800000 Size:0x00500000 [0001.274] I> 42) Base:0x00000000 Size:0x00000000 [0001.279] I> 43) Base:0x00000000 Size:0x00000000 [0001.283] GIC-SPI Target CPU: 4 [0001.286] Interrupts Init done [0001.290] calling constructors [0001.293] initializing heap [0001.295] initializing threads [0001.299] initializing timers [0001.302] creating bootstrap completion thread [0001.306] top of bootstrap2() [0001.309] CPU: ARM Cortex A57 [0001.313] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100 [0001.318] initializing platform [0001.321] I> Boot-device: eMMC [0001.325] I> sdmmc bdev is already initialized [0001.331] I> Found 16 partitions in SDMMC_BOOT (instance 3) [0001.337] I> Found 31 partitions in SDMMC_USER (instance 3) [0001.343] W> opt-in fuse is not set, skip fuse_burning [0001.347] I> Reserved memory at 0xfbe00000 for U-Boot relocation [0001.353] W> No valid slot number is found in scratch register [0001.359] W> Return default slot: _a [0001.362] I> A/B: bin_type (21) slot 0 [0001.366] I> Loading partition kernel-dtb at 0x80000000 from device(0x1) [0001.379] I> Kernel_dtb @0x80000000 [0001.382] I> Bl_dtb @0x8520f400 [0001.385] I> gpio framework initialized [0001.392] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio' driver [0001.402] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio-aon' driver [0001.409] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee [0001.418] E> I2C: slave not found in slaves. [0001.422] E> I2C: Could not write 0 bytes to slave: 0x00ee with repeat start false. [0001.429] E> I2C_DEV: Failed to send register address 0x00000004. [0001.435] E> I2C_DEV: Could not write 1 registers of size 1 to slave 0xee at 0x00000004 via instance 0. [0001.445] E> tca9539_device_init: failed to write polar reg [0001.450] E> tegrabl_tca9539_init: failed to init device! [0001.455] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xe8 [0001.462] E> I2C: slave not found in slaves. [0001.466] E> I2C: Could not write 0 bytes to slave: 0x00e8 with repeat start false. [0001.474] E> I2C_DEV: Failed to send register address 0x00000004. [0001.480] E> I2C_DEV: Could not write 1 registers of size 1 to slave 0xe8 at 0x00000004 via instance 0. [0001.489] E> tca9539_device_init: failed to write polar reg [0001.494] E> tegrabl_tca9539_init: failed to init device! [0001.503] I> fixed regulator driver initialized [0001.535] I> register 'maxim' power off handle [0001.541] I> virtual i2c enabled [0001.544] I> registered 'maxim,max77620' pmic [0001.548] I> tegrabl_gpio_driver_register: register 'max77620-gpio' driver [0001.561] I> Find /i2c@c250000's alias i2c7 [0001.565] I> Reading eeprom i2c=7 address=0x50 [0001.594] I> Device at /i2c@c250000:0x50 [0001.598] I> Reading eeprom i2c=7 address=0x57 [0001.603] E> I2C: slave not found in slaves. [0001.607] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true. [0001.614] E> I2C_DEV: Failed to send register address 0x00000000. [0001.620] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 7. [0001.630] E> eeprom: Failed to read I2C slave device [0001.635] I> Eeprom read failed 0x3526070d [0001.639] I> Find /i2c@c240000's alias i2c1 [0001.643] I> Reading eeprom i2c=1 address=0x51 [0001.648] E> I2C: slave not found in slaves. [0001.652] E> I2C: Could not write 0 bytes to slave: 0x00a2 with repeat start true. [0001.660] E> I2C_DEV: Failed to send register address 0x00000000. [0001.666] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa2 at 0x00000000 via instance 1. [0001.676] E> eeprom: Retry to read I2C slave device. [0001.680] E> I2C: slave not found in slaves. [0001.684] E> I2C: Could not write 0 bytes to slave: 0x00a2 with repeat start true. [0001.692] E> I2C_DEV: Failed to send register address 0x00000000. [0001.698] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa2 at 0x00000000 via instance 1. [0001.708] E> eeprom: Failed to read I2C slave device [0001.712] I> Eeprom read failed 0x3526070d [0001.717] I> Find /i2c@3160000's alias i2c0 [0001.721] I> Reading eeprom i2c=0 address=0x50 [0001.725] E> I2C: slave not found in slaves. [0001.729] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0001.737] E> I2C_DEV: Failed to send register address 0x00000000. [0001.743] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 0. [0001.752] E> eeprom: Failed to read I2C slave device [0001.757] I> Eeprom read failed 0x3526070d [0001.762] I> Find /i2c@3180000's alias i2c2 [0001.766] I> Reading eeprom i2c=2 address=0x54 [0001.770] I> Enabling gpio chip_id = 2, gpio pin = 9 [0001.775] C> GPIO driver for chip_id 0x2 could not be found [0001.780] E> cam_eeprom_read: Can't get gpio driver [0001.785] I> Eeprom read failed 0x4d4d000d [0001.789] I> Reading eeprom i2c=2 address=0x57 [0001.793] I> Enabling gpio chip_id = 2, gpio pin = 9 [0001.798] C> GPIO driver for chip_id 0x2 could not be found [0001.803] E> cam_eeprom_read: Can't get gpio driver [0001.808] I> Eeprom read failed 0x4d4d000d [0001.812] I> create_pm_ids: id: 3310-1000-D01-B, len: 15 [0001.817] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.856] E> tegrabl_display_init_regulator: hdmi cable is not connected [0001.863] E> tegrabl_display_get_pdata, failed to parse dtb settings [0001.872] E> cannot find any other nvdisp nodes [0001.876] E> no valid display unit config found in dtb [0001.882] W> display init failed [0001.885] initializing target [0001.888] calling apps_init() [0001.891] starting app kernel_boot_app [0001.897] I> found decompressor handler: lz4-legacy [0001.902] I> decompressing BMP blob ... [0001.912] I> Kernel type = Normal [0001.915] I> Loading kernel from partition ... [0001.919] W> No valid slot number is found in scratch register [0001.925] W> Return default slot: _a [0001.928] I> A/B: bin_type (24) slot 0 [0001.933] I> Boot image size read from image header: f2d10 [0001.938] I> Boot image load address: 0x0x80400000 [0001.943] I> Loading partition kernel at 0x80400000 from device(0x1) [0002.704] I> Kernel hdr @0x80400000 [0002.708] I> Kernel dtb @0x80000000 [0002.711] I> T18x: Authenticate boot.img (bin_type 24), max size 0x4000000 [0002.719] I> T18x: Authenticate tegra194-p2888-0001-p2822-0000.dtb (bin_type 21), max size 0x100000 [0002.728] I> Checking boot.img header magic ... [0002.733] I> [OK] [0002.734] I> Valid boot.img @ 0x80400000 [0002.738] I> decompressor handler not found [0002.742] I> Copying kernel image (477378 bytes) from 0x80400800 to 0x80800000 ... [0002.750] I> Done [0002.751] I> Move ramdisk (len: 0) from 0x80475800 to 0x94830000 [0002.759] I> Updated bpmp info to DTB [0002.764] I> Ramdisk: Base: 0x94830000; Size: 0x0 [0002.768] I> Updated initrd info to DTB [0002.772] W> WARN: Fail to override "console=none" in commandline [0002.778] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0002.785] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0002.792] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0002.800] I> disabled_core_mask: 0xffffff0c [0002.804] W> No valid slot number is found in scratch register [0002.809] W> Return default slot: _a [0002.813] I> Active slot suffix: [0002.816] I> add_boot_slot_suffix: slot_suffix = [0002.820] I> Linux Cmdline: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2031647.1 bl_prof_dataptr=0x10000@0x275840000 sdhci_tegra.en_boot_part_access=1 [0002.857] I> Updated bootarg info to DTB [0002.860] I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:c6:2d:20 [0002.867] I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:c6:2d:21 [0002.873] I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:c6:2d:22 [0002.881] E> Found no plugin manager ids in source DT [0002.886] W> Add plugin manager ids from board info [0002.890] E> "plugin-manager" doesn't exist, creating [0002.895] E> "ids" doesn't exist, creating [0002.899] E> "connection" doesn't exist, creating [0002.904] E> "configs" doesn't exist, creating [0002.908] I> create_pm_ids: id: 3310-1000-D01-B, len: 15 [0002.914] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.924] I> Adding plugin-manager/ids/3310-1000-D01=/i2c@c250000:module@0x50 [0002.932] E> "i2c@c250000" doesn't exist, creating [0002.936] E> "module@0x50" doesn't exist, creating [0002.943] I> Adding plugin-manager/ids/3310-1000-D01-B [0002.949] I> Adding plugin-manager/configs/3310-mem-type 00 [0002.955] I> Adding plugin-manager/configs/3310-power-config 00 [0002.961] I> Adding plugin-manager/configs/3310-misc-config 00 [0002.967] I> Adding plugin-manager/configs/3310-modem-config 00 [0002.973] I> Adding plugin-manager/configs/3310-touch-config 00 [0002.979] I> Adding plugin-manager/configs/3310-display-config 00 [0002.985] I> Adding plugin-manager/cvm [0002.989] E> "chip-id" doesn't exist, creating [0002.993] I> Adding plugin-manager/chip-id/A02P [0002.997] E> "odm-data" doesn't exist, creating [0003.002] I> Adding /chosen/plugin-manager/odm-data [0003.011] I> added [base:0x80000000, size:0x70000000] to /memory [0003.017] I> added [base:0xf0200000, size:0x185600000] to /memory [0003.023] I> added [base:0x275e00000, size:0x200000] to /memory [0003.029] I> added [base:0x276600000, size:0x200000] to /memory [0003.034] I> added [base:0x277000000, size:0x200000] to /memory [0003.040] I> Updated memory info to DTB [0003.045] E> add_disp_param: failed to get display params for du=0 [0003.052] E> "reset" doesn't exist, creating [0003.056] E> "pmc-reset-reason" doesn't exist, creating [0003.062] E> "pmic-reset-reason" doesn't exist, creating [0003.068] I> Adding ecid(000000016450b8881c0000000afb0340) to DT [0003.074] I> disabled_core_mask: 0xffffff0c [0003.085] I> Add serial number:0424118099568 as DT property [0003.093] I> Plugin-manager override starting [0003.099] I> node /plugin-manager/fragement@0 matches [0003.109] I> node /plugin-manager/fragement@4 matches [0003.121] I> node /plugin-manager/fragment-sdwake-p3310-1000-300 matches [0003.140] I> node /plugin-manager/fragement-pmon-p3310-1000-300 matches [0003.149] I> node /plugin-manager/fragement-pmon-p3310-1000-800 matches [0003.158] I> node /plugin-manager/fragment-devslp@0 matches [0003.172] I> node /plugin-manager/fragment-p3310-c00-comm matches [0003.185] I> node /plugin-manager/fragment-p3310-c00-pmic matches [0003.195] I> node /plugin-manager/fragment-p3310-c01 matches [0003.207] I> node /plugin-manager/fragment-p3310-c03 matches [0003.235] I> Disable plugin-manager status in FDT [0003.239] I> Plugin-manager override finished successfully [0003.244] I> tegrabl_load_kernel_and_dtb: Done [0003.249] E> tegrabl_display_clear: display is not initialized [0003.254] W> Boot logo display failed... [0003.258] I> Kernel EP: 0x80800000, DTB: 0x80000000 U-Boot 2016.07-gd917e08cec (Aug 12 2019 - 21:16:16 -0700) TEGRA186 Model: NVIDIA P2771-0000-500 DRAM: 7.8 GiB MC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: eth0: ethernet@2490000 Hit any key to stop autoboot: 2  1  0 MMC: no card present switch to partitions #0, OK mmc0(part 0) is current device Scanning mmc 0:1... Found /boot/extlinux/extlinux.conf Retrieving file: /boot/extlinux/extlinux.conf 727 bytes read in 125 ms (4.9 KiB/s) L4T boot options 1: primary kernel Enter choice: 1: primary kernel Retrieving file: /boot/initrd 5565090 bytes read in 217 ms (24.5 MiB/s) Retrieving file: /boot/Image 34742280 bytes read in 871 ms (38 MiB/s) append: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2031647.1 bl_prof_dataptr=0x10000@0x275840000 sdhci_tegra.en_boot_part_access=1 ## Flattened Device Tree blob at 80000000 Booting using the fdt blob at 0x80000000 reserving fdt memory region: addr=80000000 size=10000 Using Device Tree in place at 0000000080000000, end 0000000080053a7f Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.9.140-tegra (alfredo@gohan) (gcc version 7.4.0 (Ubuntu/Linaro 7.4.0-1ubuntu1~18.04.1) ) #1 SMP PREEMPT Fri Nov 1 10:42:24 -03 2019 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 16416, [ 0.000000] OF: fdt: - 80000000 , 70000000 [ 0.000000] OF: fdt: - f0200000 , 185600000 [ 0.000000] OF: fdt: - 275e00000 , 200000 [ 0.000000] OF: fdt: - 276600000 , 200000 [ 0.000000] OF: fdt: - 277000000 , 200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fc000000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 25 pages/cpu @ffffffc1f676a000 s61592 r8192 d32616 u102400 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2022968 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2031647.1 bl_prof_dataptr=0x10000@0x275840000 sdhci_tegra.en_boot_part_access=1 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 29508(90%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 7968844K/8220672K available (15294K kernel code, 2952K rwdata, 7076K rodata, 8576K init, 621K bss, 186292K reserved, 65536K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f70000 ( 15296 KB) [ 0.000000] .rodata : 0xffffff8008f70000 - 0xffffff8009660000 ( 7104 KB) [ 0.000000] .init : 0xffffff8009660000 - 0xffffff8009ec0000 ( 8576 KB) [ 0.000000] .data : 0xffffff8009ec0000 - 0xffffff800a1a2008 ( 2953 KB) [ 0.000000] .bss : 0xffffff800a1a2008 - 0xffffff800a23d77c ( 622 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf07dc8000 ( 125 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc1f7200000 ( 8050 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000003] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.009582] Console: colour dummy device 80x25 [ 0.014245] console [tty0] enabled [ 0.017802] bootconsole [uart8250] disabled [ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.9.140-tegra (alfredo@gohan) (gcc version 7.4.0 (Ubuntu/Linaro 7.4.0-1ubuntu1~18.04.1) ) #1 SMP PREEMPT Fri Nov 1 10:42:24 -03 2019 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 16416, [ 0.000000] OF: fdt: - 80000000 , 70000000 [ 0.000000] OF: fdt: - f0200000 , 185600000 [ 0.000000] OF: fdt: - 275e00000 , 200000 [ 0.000000] OF: fdt: - 276600000 , 200000 [ 0.000000] OF: fdt: - 277000000 , 200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fc000000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 25 pages/cpu @ffffffc1f676a000 s61592 r8192 d32616 u102400 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2022968 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2031647.1 bl_prof_dataptr=0x10000@0x275840000 sdhci_tegra.en_boot_part_access=1 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 29508(90%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 7968844K/8220672K available (15294K kernel code, 2952K rwdata, 7076K rodata, 8576K init, 621K bss, 186292K reserved, 65536K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f70000 ( 15296 KB) [ 0.000000] .rodata : 0xffffff8008f70000 - 0xffffff8009660000 ( 7104 KB) [ 0.000000] .init : 0xffffff8009660000 - 0xffffff8009ec0000 ( 8576 KB) [ 0.000000] .data : 0xffffff8009ec0000 - 0xffffff800a1a2008 ( 2953 KB) [ 0.000000] .bss : 0xffffff800a1a2008 - 0xffffff800a23d77c ( 622 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf07dc8000 ( 125 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc1f7200000 ( 8050 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000003] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.009582] Console: colour dummy device 80x25 [ 0.014245] console [tty0] enabled [ 0.017802] bootconsole [uart8250] disabled [ 0.022179] kmemleak: Kernel memory leak detector disabled [ 0.022195] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.022210] pid_max: default: 32768 minimum: 301 [ 0.022530] Security Framework initialized [ 0.022693] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.022705] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.023300] ftrace: allocating 47217 entries in 185 pages [ 0.148400] sched-energy: Sched-energy-costs installed from DT [ 0.148420] ASID allocator initialised with 65536 entries [ 0.183495] tegra-id: chipid=21817. [ 0.183511] tegra-id: opt_subrevision=1. [ 0.183532] Tegra Revision: A02p SKU: 0xdc CPU Process: 0 SoC Process: 0 [ 0.183547] DTS File Name: /l/disk0/alfredo/nvidia/nvidia_sdk/JetPack_4.2.2_Linux_GA_P3310/Linux_for_Tegra/sources/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/quill/kernel-dts/tegra186-quill-p3310-1000-c03-00-base.dts [ 0.183568] DTB Build time: Nov 5 2019 15:35:50 [ 0.230023] CPU1: Booted secondary processor [4e0f0030] [ 0.261656] CPU2: Booted secondary processor [4e0f0030] [ 0.293446] CPU3: Booted secondary processor [411fd073] [ 0.325438] CPU4: Booted secondary processor [411fd073] [ 0.357429] CPU5: Booted secondary processor [411fd073] [ 0.357483] Brought up 6 CPUs [ 0.357530] SMP: Total of 6 processors activated. [ 0.357543] CPU features: detected feature: 32-bit EL0 Support [ 0.358340] CPU: All CPU(s) started at EL2 [ 0.358402] alternatives: patching kernel code [ 0.367916] devtmpfs: initialized [ 0.401122] Initilizing CustomIPI irq domain [ 0.401342] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.401369] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.402209] pinctrl core: initialized pinctrl subsystem [ 0.402418] OS set in device tree is not L4T. [ 0.402580] regulator-dummy: no parameters [ 0.402735] Initializing plugin-manager [ 0.402804] Plugin module not found [ 0.402850] Plugin-manager status disabled [ 0.404359] NET: Registered protocol family 16 [ 0.405013] pstore: using zlib compression [ 0.405428] console [pstore-1] enabled [ 0.405440] pstore: Registered ramoops as persistent store backend [ 0.405453] ramoops: attached 0x200000@0x275880000, ecc: 0/0 [ 0.421042] cpuidle: using governor menu [ 0.422512] bpmp: waiting for handshake [ 0.422528] bpmp: handshake completed [ 0.422551] bpmp: synchronizing channels [ 0.422567] bpmp: channels synchronized [ 0.422580] bpmp: mail init ok [ 0.424667] arm-smmu 12000000.iommu: probing hardware configuration... [ 0.424685] arm-smmu 12000000.iommu: SMMUv2 with: [ 0.424700] arm-smmu 12000000.iommu: stage 1 translation [ 0.424713] arm-smmu 12000000.iommu: stage 2 translation [ 0.424726] arm-smmu 12000000.iommu: nested translation [ 0.424741] arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80 [ 0.424761] arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)! [ 0.424780] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 0.424794] arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA [ 0.424807] arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA [ 0.426555] vdso: 2 pages (1 code @ ffffff8008f77000, 1 data @ ffffff8009ec4000) [ 0.426585] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.429192] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.430641] Registering BPMP clocks... [ 0.430743] tegra_bpmp_clk_init: clock init ok (638 clks) [ 0.432755] tegra_powergate_init: DONE [ 0.432775] DTS File Name: /l/disk0/alfredo/nvidia/nvidia_sdk/JetPack_4.2.2_Linux_GA_P3310/Linux_for_Tegra/sources/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/quill/kernel-dts/tegra186-quill-p3310-1000-c03-00-base.dts [ 0.432808] DTB Build time: Nov 5 2019 15:35:50 [ 0.434550] Tegra reboot handler registered. [ 0.435937] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.436012] tegra-pmc: get_secure_pmc_setting: done secure_pmc=0 [ 0.436037] tegra-pmc: ### PMC reset source: TEGRA_SOFTWARE_RESET [ 0.436050] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L1 [ 0.436062] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.436225] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.436252] tegra-pmc c360000.pmc: IO padctrl driver initialized [ 0.436590] iommu: Adding device 3460000.sdhci to group 0 [ 0.437308] iommu: Adding device 3400000.sdhci to group 1 [ 0.438379] iommu: Adding device 3507000.ahci-sata to group 2 [ 0.438405] arm-smmu: forcing sodev map for 3507000.ahci-sata [ 0.438849] iommu: Adding device 3160000.i2c to group 3 [ 0.439305] iommu: Adding device c240000.i2c to group 4 [ 0.439671] iommu: Adding device 3180000.i2c to group 5 [ 0.440015] iommu: Adding device 3190000.i2c to group 6 [ 0.440457] iommu: Adding device 31b0000.i2c to group 7 [ 0.440803] iommu: Adding device 31c0000.i2c to group 8 [ 0.441175] iommu: Adding device c250000.i2c to group 9 [ 0.441527] iommu: Adding device 31e0000.i2c to group 10 [ 0.443027] iommu: Adding device 3210000.spi to group 11 [ 0.443380] iommu: Adding device c260000.spi to group 12 [ 0.443728] iommu: Adding device 3240000.spi to group 13 [ 0.444427] iommu: Adding device 3100000.serial to group 14 [ 0.444775] iommu: Adding device 3110000.serial to group 15 [ 0.445135] iommu: Adding device c280000.serial to group 16 [ 0.445485] iommu: Adding device 3130000.serial to group 17 [ 0.446838] iommu: Adding device 2490000.ether_qos to group 18 [ 0.446868] arm-smmu: forcing sodev map for 2490000.ether_qos [ 0.447549] iommu: Adding device b000000.rtcpu to group 19 [ 0.449777] iommu: Adding device 13e10000.host1x to group 20 [ 0.450094] iommu: Adding device 13e10000.host1x:ctx0 to group 21 [ 0.450402] iommu: Adding device 13e10000.host1x:ctx1 to group 22 [ 0.450722] iommu: Adding device 13e10000.host1x:ctx2 to group 23 [ 0.451032] iommu: Adding device 13e10000.host1x:ctx3 to group 24 [ 0.451344] iommu: Adding device 13e10000.host1x:ctx4 to group 25 [ 0.451659] iommu: Adding device 13e10000.host1x:ctx5 to group 26 [ 0.451982] iommu: Adding device 13e10000.host1x:ctx6 to group 27 [ 0.452297] iommu: Adding device 13e10000.host1x:ctx7 to group 28 [ 0.452774] iommu: Adding device 150c0000.nvcsi to group 29 [ 0.453461] iommu: Adding device 15700000.vi to group 30 [ 0.453847] iommu: Adding device 15600000.isp to group 31 [ 0.454326] iommu: Adding device 15220000.nvdisplay to group 32 [ 0.454933] iommu: Adding device 15340000.vic to group 33 [ 0.455163] iommu: Adding device 154c0000.nvenc to group 34 [ 0.455391] iommu: Adding device 15480000.nvdec to group 35 [ 0.455744] iommu: Adding device 15380000.nvjpg to group 36 [ 0.455978] iommu: Adding device 15500000.tsec to group 37 [ 0.456203] iommu: Adding device 15100000.tsecb to group 38 [ 0.456762] iommu: Adding device 15810000.se to group 39 [ 0.456992] iommu: Adding device 15820000.se to group 40 [ 0.457234] iommu: Adding device 15830000.se to group 41 [ 0.457458] iommu: Adding device 15840000.se to group 42 [ 0.458339] iommu: Adding device smmu_test to group 43 [ 0.458950] mc: mapped MMIO address: 0xffffff800a740000 -> 0x2c10000 [ 0.458974] mc: mapped MMIO address: 0xffffff800a760000 -> 0x2c20000 [ 0.458995] mc: mapped MMIO address: 0xffffff800a780000 -> 0x2c30000 [ 0.459015] mc: mapped MMIO address: 0xffffff800a7a0000 -> 0x2c40000 [ 0.459034] mc: mapped MMIO address: 0xffffff800a7c0000 -> 0x2c50000 [ 0.459054] nv-tegra-mc 2c10000.mc: No mssnvlink node [ 0.459077] mc-err: mcerr ops are set to t18x [ 0.459230] dram-ecc: DRAM ECC disabled-MC_ECC_CONTROL:0x0000000c [ 0.460331] iommu: Adding device 3530000.xhci to group 44 [ 0.460355] arm-smmu: forcing sodev map for 3530000.xhci [ 0.461086] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3 [ 0.461105] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256 [ 0.461695] iommu: Adding device 17000000.gp10b to group 45 [ 0.462751] tegra-reset 5000000.clock: registered 193 resets. [ 0.464972] iommu: Adding device d000000.bpmp to group 46 [ 0.465208] bpmp: ping status is 0 [ 0.465311] bpmp d000000.bpmp: firmware tag is 4208eb5c85fe47a2235fbc0b8eb87dca [ 0.467548] bpmp d000000.bpmp: probe ok [ 0.470732] iommu: Adding device 2600000.dma to group 47 [ 0.472014] GPIO line 424 (wifi-enable) hogged as output/high [ 0.472055] GPIO line 445 (sdmmc-wake-support-input) hogged as input [ 0.472090] GPIO line 446 (sdmmc-wake-support-output) hogged as output/low [ 0.472301] gpiochip_setup_dev: registered GPIOs 320 to 511 on device: gpiochip0 (tegra-gpio) [ 0.476055] GPIO line 315 (wifi-wake-ap) hogged as input [ 0.476244] gpiochip_setup_dev: registered GPIOs 256 to 319 on device: gpiochip1 (tegra-gpio-aon) [ 0.477869] iommu: Adding device 10003000.pcie-controller to group 48 [ 0.477897] arm-smmu: forcing sodev map for 10003000.pcie-controller [ 0.478226] iommu: Adding device sound to group 49 [ 0.478596] iommu: Adding device 3510000.hda to group 50 [ 0.485951] iommu: Adding device c1a0000.aon to group 51 [ 0.486396] vdd-ac-bat: 5000 mV [ 0.488038] vdd-1v8-ap: 1800 mV [ 0.517683] random: fast init done [ 0.531065] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.537060] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.537638] SCSI subsystem initialized [ 0.538260] usbcore: registered new interface driver usbfs [ 0.538356] usbcore: registered new interface driver hub [ 0.538521] usbcore: registered new device driver usb [ 0.555471] max77620 4-003c: PMIC Version OTP:0x45 and ES:0x8 [ 0.561913] vddio-ddr: at 1125 mV [ 0.565698] avdd_dsi_csi: 1200 mV [ 0.569698] vdd-1v8: 1800 mV [ 0.573697] vdd-3v3-sys: 3300 mV [ 0.575184] spmic-ldo0: at 1800 mV [ 0.576113] spmic-ldo1: at 800 mV [ 0.582055] vddio-3v3: 3300 mV [ 0.582900] vddio-sdmmc1: 1800 <--> 3300 mV at 3300 mV [ 0.586059] vdd-rtc: at 800 mV [ 0.587012] avdd-ts-hv: 1800 <--> 3300 mV at 1800 mV [ 0.590092] spmic-ldo6: at 1500 mV [ 0.594065] vdd-pex-1v00: 1000 mV [ 0.594907] dvdd-pex: 1000 mV [ 0.597663] GPIO line 253 (spmic_gpio_input) hogged as input [ 0.597882] GPIO line 254 (spmic_gpio_input) hogged as input [ 0.598246] gpiochip_setup_dev: registered GPIOs 248 to 255 on device: gpiochip2 (max77620-gpio) [ 0.598619] max77620 4-003c: max77620 probe successful [ 0.599276] media: Linux media interface: v0.10 [ 0.599360] Linux video capture interface: v2.00 [ 0.603649] pps_core: LinuxPPS API ver. 1 registered [ 0.603703] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.603785] PTP clock support registered [ 0.604549] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.604622] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.608558] tegra_fiq_debugger_init: found FIQ source (IRQ 384) [ 0.614267] trusty trusty: trusty version: Built: 21:17:07 Aug 12 2019 [ 0.614359] trusty trusty: selected api version: 3 (requested 3) [ 0.615499] Advanced Linux Sound Architecture Driver Initialized. [ 0.616046] Bluetooth: Core ver 2.22 [ 0.616137] NET: Registered protocol family 31 [ 0.616170] Bluetooth: HCI device and connection manager initialized [ 0.616233] Bluetooth: HCI socket layer initialized [ 0.616275] Bluetooth: L2CAP socket layer initialized [ 0.616327] Bluetooth: SCO socket layer initialized [ 0.617296] en-vdd-sd: 3300 mV [ 0.617839] vdd-usb0-5v: 5000 mV [ 0.618282] vdd-usb1-5v: 5000 mV [ 0.618925] vdd-3v3: 3300 mV [ 0.619252] en-vdd-vcm-2v8: 2800 mV [ 0.619578] vdd-sys-bl: 3300 mV [ 0.622835] camchar: rtcpu character device driver loaded [ 0.623536] gpio tegra-gpio wake53 for gpio=159(X:7) [ 0.625688] extcon-gpio-states external-connection:extcon@1: Cable state:1, cable id:1 [ 0.627225] clocksource: Switched to clocksource arch_sys_counter [ 0.668253] VFS: Disk quotas dquot_6.6.0 [ 0.668518] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.669177] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.670120] nvmap: nvmap_select_cache_ops() nvmap cache ops set to roc [ 0.670166] nvmap_page_pool_init: Total RAM pages: 2008595 [ 0.670202] nvmap_page_pool_init: nvmap page pool size: 251074 pages (980 MB) [ 0.670438] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.674402] tegra-gpcdma 2600000.dma: GPC DMA driver register 32 channels [ 0.686442] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type BCPU-therm [ 0.686694] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type MCPU-therm [ 0.687254] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.687402] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.687600] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type Tboard_tegra [ 0.687821] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type Tdiode_tegra [ 0.688077] thermal thermal_zone6: Registering thermal zone thermal_zone6 for type PMIC-Die [ 0.688364] la/ptsa driver initialized. [ 0.688402] pre_t19x_iso_plat_init(): iso emc max clk=1866000KHz [ 0.688435] pre_t19x_iso_plat_init(): max_iso_bw=26870400KB [ 0.689614] NET: Registered protocol family 2 [ 0.691723] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.692419] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.693229] TCP: Hash tables configured (established 65536 bind 65536) [ 0.693336] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.693492] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.694356] NET: Registered protocol family 1 [ 0.695444] RPC: Registered named UNIX socket transport module. [ 0.695484] RPC: Registered udp transport module. [ 0.695515] RPC: Registered tcp transport module. [ 0.695545] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.695841] Trying to unpack rootfs image as initramfs... [ 0.885889] Freeing initrd memory: 5432K [ 0.906963] host1x 13e10000.host1x: initialized [ 0.908980] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.913726] audit: initializing netlink subsys (disabled) [ 0.913818] audit: type=2000 audit(0.796:1): initialized [ 0.914621] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.930870] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.933584] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.935279] 9p: Installing v9fs 9p2000 file system support [ 0.941435] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.945704] io scheduler noop registered [ 0.946378] io scheduler cfq registered (default) [ 0.951321] gic 2a41000.agic-controller: GIC IRQ controller registered [ 1.074905] iommu: Adding device aconnect@2a41000:adsp_audio to group 52 [ 1.115265] iommu: Adding device 2993000.adsp to group 53 [ 1.116422] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 1.119594] tegra-xusb-padctl 3520000.xusb_padctl: VBUS over-current detection enabled [ 1.123420] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.124642] tegra-pwm 3290000.pwm: PWM clk can sleep in ops [ 1.125725] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 1.126832] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.129173] tegra-pcie 10003000.pcie-controller: 2x1, 1x1, 1x1 configuration [ 1.130218] tegra-pcie 10003000.pcie-controller: PCIE: Enable power rails [ 1.130583] tegra-pcie 10003000.pcie-controller: probing port 0, using 2 lanes [ 1.130698] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 1.130824] misc tegra_camera_ctrl: tegra_camera_isomgr_register tpg_max_iso = 3916800KBs [ 1.130845] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=4687500, vi_iso_bw=2000000, max_bw=4687500 [ 1.132640] tegra-pcie 10003000.pcie-controller: probing port 1, using 1 lanes [ 1.134208] tsec 15500000.tsec: initialized [ 1.135671] tsec 15100000.tsecb: initialized [ 1.139800] nvdec 15480000.nvdec: initialized [ 1.146359] falcon 15340000.vic: initialized [ 1.148071] falcon 154c0000.nvenc: initialized [ 1.149864] falcon 15380000.nvjpg: initialized [ 1.153680] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56) [ 1.155404] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57) [ 1.157077] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58) [ 1.158736] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59) [ 1.160621] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60) [ 1.162241] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61) [ 1.163869] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62) [ 1.165464] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63) [ 1.169325] tegradccommon 15200000.dc_common: host1x channel mapped [ 1.169371] tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated [ 1.169428] tegradccommon 15200000.dc_common: dma mapping done [ 1.171921] tegradc 15220000.nvdisplay: disp0 connected to head2->/host1x/sor [ 1.172069] generic_infoframe_type: 0x87 [ 1.172321] tegradc 15220000.nvdisplay: DT parsed successfully [ 1.172367] tegradc 15220000.nvdisplay: Display dc.ffffff800aca0000 registered with id=0 [ 1.182978] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 16727000 KB/s [ 1.183025] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 665600000 Hz [ 1.183059] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 357620000 Hz [ 1.183472] tegradc 15220000.nvdisplay: vblank syncpt # 8 for dc 2 [ 1.183505] tegradc 15220000.nvdisplay: vpulse3 syncpt # 9 for dc 2 [ 1.189745] tegradc 15220000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board [ 1.189895] tegradc 15220000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 1.190927] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 32 channels [ 1.191856] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized [ 1.192650] kfuse 3830000.kfuse: initialized [ 1.194480] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 1.198181] tegradc 15220000.nvdisplay: probed [ 1.199659] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.202887] console [ttyS0] disabled [ 1.202971] 3100000.serial: ttyS0 at MMIO 0x3100000 (irq = 36, base_baud = 25500000) is a Tegra [ 1.558552] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 1.962781] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 2.367022] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 2.369039] tegra-pcie 10003000.pcie-controller: link 0 down, ignoring [ 2.477241] tegra-pcie 10003000.pcie-controller: PCI host bridge to bus 0000:00 [ 2.477246] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 2.477250] pci_bus 0000:00: root bus resource [mem 0x40100000-0x47ffffff] [ 2.477254] pci_bus 0000:00: root bus resource [mem 0x48000000-0x7fffffff pref] [ 2.477258] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.477659] iommu: Adding device 0000:00:02.0 to group 54 [ 2.477670] arm-smmu: forcing sodev map for 0000:00:02.0 [ 2.477747] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 2.478603] iommu: Adding device 0000:01:00.0 to group 55 [ 2.478607] arm-smmu: forcing sodev map for 0000:01:00.0 [ 2.487467] pci 0000:00:02.0: BAR 14: assigned [mem 0x40100000-0x401fffff] [ 2.487474] pci 0000:01:00.0: BAR 0: assigned [mem 0x40100000-0x40103fff 64bit] [ 2.487508] pci 0000:00:02.0: PCI bridge to [bus 01] [ 2.487517] pci 0000:00:02.0: bridge window [mem 0x40100000-0x401fffff] [ 2.487883] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt [ 2.487887] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.493527] console [ttyS0] enabled [ 3.495356] Console: switching to colour frame buffer device 80x30 [ 3.505137] tegradc 15220000.nvdisplay: fb registered [ 3.506198] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 37, base_baud = 0) is a TEGRA_UART [ 3.507559] c280000.serial: ttyTHS2 at MMIO 0xc280000 (irq = 38, base_baud = 0) is a TEGRA_UART [ 3.507814] serial-tegra 3130000.serial: RX in PIO mode [ 3.508992] 3130000.serial: ttyTHS3 at MMIO 0x3130000 (irq = 39, base_baud = 0) is a TEGRA_UART [ 3.510114] [drm] Initialized [ 3.545207] gpio tegra-gpio wake19 for gpio=120(P:0) [ 3.548560] brd: module loaded [ 3.554090] loop: module loaded [ 3.555422] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 3.555550] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 3.561764] Parent Clock set for DC plld3 [ 3.565647] edid invalid [ 3.566523] tegradc 15220000.nvdisplay: hdmi: tmds rate:25200K prod-setting:prod_c_hdmi_0m_54m [ 3.568033] tegradc 15220000.nvdisplay: hdmi: get RGB quant from EDID. [ 3.568042] tegradc 15220000.nvdisplay: hdmi: get YCC quant from EDID. [ 3.597894] tegra_profiler: version: 1.135, samples/io: 47/26 [ 3.603829] tegra_profiler: auth: init [ 3.604433] extcon-disp-state external-connection:disp-state: cable 46 state 1 [ 3.604437] Extcon AUX0(HDMI) enable [ 3.619021] nct1008_nct72 7-004c: starting parse dt [ 3.619273] THERMAL EST: found 3 subdevs [ 3.619278] THERMAL EST num_resources: 0 [ 3.619282] [THERMAL EST subdev 0] [ 3.619289] [THERMAL EST subdev 1] [ 3.619293] [THERMAL EST subdev 2] [ 3.619638] thermal thermal_zone7: Registering thermal zone thermal_zone7 for type thermal-fan-est [ 3.619641] THERMAL EST: thz register success. [ 3.623849] THERMAL EST: end of probe, return err: 0 [ 3.624913] hisi_sas: driver version v1.6 [ 3.625661] nvme nvme0: pci function 0000:01:00.0 [ 3.625714] nvme 0000:01:00.0: enabling device (0000 -> 0002) [ 3.629598] tegra-ahci 3507000.ahci-sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode [ 3.629609] tegra-ahci 3507000.ahci-sata: flags: 64bit ncq sntf pm led pmp pio slum part deso sadm apst [ 3.634550] scsi host0: tegra_ahci [ 3.635470] scsi host1: tegra_ahci [ 3.635615] ata1: SATA max UDMA/133 mmio [mem 0x03507000-0x03508fff] port 0x100 irq 24 [ 3.635619] ata2: DUMMY [ 3.641513] libphy: Fixed MDIO Bus: probed [ 3.641949] tun: Universal TUN/TAP device driver, 1.6 [ 3.641952] tun: (C) 1999-2004 Max Krasnyansky [ 3.647824] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 3.647826] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 3.647858] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 3.647860] igb: Copyright (c) 2007-2014 Intel Corporation. [ 3.647888] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 3.647889] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 3.647915] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4 [ 3.647917] Copyright(c) 1999 - 2017 Intel Corporation. [ 3.652465] eqos 2490000.ether_qos: can't get pllrefe_vcoout clk (-2) [ 3.655659] eqos 2490000.ether_qos: Setting local MAC: 0 4 4b c6 2d 22 [ 3.655838] libphy: dwc_phy: probed [ 3.656302] bcm54xx_low_power_mode(): put phy in iddq-lp mode [ 3.658449] PPP generic driver version 2.4.2 [ 3.660691] PPP BSD Compression module registered [ 3.660695] PPP Deflate Compression module registered [ 3.660740] PPP MPPE Compression module registered [ 3.660746] NET: Registered protocol family 24 [ 3.660799] usbcore: registered new interface driver r8152 [ 3.660839] usbcore: registered new interface driver asix [ 3.660872] usbcore: registered new interface driver ax88179_178a [ 3.660910] usbcore: registered new interface driver cdc_ether [ 3.660950] usbcore: registered new interface driver net1080 [ 3.660978] usbcore: registered new interface driver cdc_subset [ 3.661014] usbcore: registered new interface driver zaurus [ 3.661059] usbcore: registered new interface driver cdc_ncm [ 3.664833] VFIO - User Level meta-driver version: 0.3 [ 3.666511] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.666529] ehci-pci: EHCI PCI platform driver [ 3.666558] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.666566] ohci-pci: OHCI PCI platform driver [ 3.666593] ohci-platform: OHCI generic platform driver [ 3.672521] usb3: Requested PHY is disabled [ 3.672977] tegra-xusb 3530000.xhci: No USB port has OTG_CAP [ 3.676156] usbcore: registered new interface driver uas [ 3.676265] usbcore: registered new interface driver usb-storage [ 3.676481] usbcore: registered new interface driver usbserial [ 3.677757] tegra-xusb 3530000.xhci: Firmware timestamp: 2018-12-26 10:30:04 UTC, Version: 55.12 release [ 3.680245] mousedev: PS/2 mouse device common for all mice [ 3.680347] usbcore: registered new interface driver xpad [ 3.735416] tegra-xusb 3530000.xhci: xHCI Host Controller [ 3.735467] tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 1 [ 3.736340] tegra-xusb 3530000.xhci: hcc params 0x0184fd25 hci version 0x100 quirks 0x00050810 [ 3.736383] tegra-xusb 3530000.xhci: irq 69, io mem 0x03530000 [ 3.737025] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.737032] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.737037] usb usb1: Product: xHCI Host Controller [ 3.737042] usb usb1: Manufacturer: Linux 4.9.140-tegra xhci-hcd [ 3.737046] usb usb1: SerialNumber: 3530000.xhci [ 3.737511] hub 1-0:1.0: USB hub found [ 3.737601] hub 1-0:1.0: 4 ports detected [ 3.738067] tegra-xusb 3530000.xhci: xHCI Host Controller [ 3.738077] tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 2 [ 3.738294] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 3.738300] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.738305] usb usb2: Product: xHCI Host Controller [ 3.738309] usb usb2: Manufacturer: Linux 4.9.140-tegra xhci-hcd [ 3.738313] usb usb2: SerialNumber: 3530000.xhci [ 3.738732] hub 2-0:1.0: USB hub found [ 3.738827] hub 2-0:1.0: 3 ports detected [ 3.791699] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 3.793096] Wake73 for irq=42 [ 3.794416] rtc rtc1: alarm rtc device [ 3.794431] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ 3.794461] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.794630] i2c /dev entries driver [ 3.798578] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 3.805599] parse_throttle_dt_data: Num cap clks = 4 [ 3.805617] parse_throttle_dt_data: clk=mcpu type=1 [ 3.805621] parse_throttle_dt_data: clk=bcpu type=2 [ 3.805629] parse_throttle_dt_data: clk=gpu type=4 [ 3.805633] parse_throttle_dt_data: clk=emc type=3 [ 3.806874] tegra_throttle_probe: probe successful. #cdevs=4 [ 3.807510] FAN: coudln't get the regulator [ 3.809624] device-mapper: uevent: version 1.0.3 [ 3.810559] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 3.815522] cpufreq: platform driver Initialization: pass [ 3.821081] cpuidle: Initializing cpuidle driver init for Denver cluster [ 3.821199] cpuidle: Initializing cpuidle driver init for A57 cluster [ 3.826720] sdhci: Secure Digital Host Controller Interface driver [ 3.826722] sdhci: Copyright(c) Pierre Ossman [ 3.826724] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.828221] sdhci-tegra 3460000.sdhci: Client registration for eMC Successful [ 3.830159] CMDQ: cmdq_platfm_init successful [ 3.831382] CQE: CMD_TIMING bit set for R1B DCMD [ 3.834304] sdhci-tegra 3440000.sdhci: Client registration for eMC Successful [ 3.839441] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 3.839488] sdhci-tegra 3400000.sdhci: Got WP GPIO [ 3.840115] sdhci-tegra 3400000.sdhci: Client registration for eMC Successful [ 3.841880] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 255 [ 3.845011] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.845978] tegra-se-nvhost 15810000.se: initialized [ 3.847087] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 3.847710] tegra-se-nvhost 15820000.se: initialized [ 3.848597] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 3.849163] tegra-se-nvhost 15830000.se: initialized [ 3.849917] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 3.850493] tegra-se-nvhost 15840000.se: initialized [ 3.851370] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 3.851593] hidraw: raw HID events driver (C) Jiri Kosina [ 3.852499] usbcore: registered new interface driver usbhid [ 3.852500] usbhid: USB HID core driver [ 3.856698] tegra186-cam-rtcpu b000000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 3.870857] tegra-ivc ivc-b000000.rtcpu: region 0: iova=0xbfef0000-0xbfefdb7f size=56192 [ 3.871089] tegra-ivc ivc-b000000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 3.871387] tegra-ivc ivc-b000000.rtcpu:i2c@480: i2c: ver=0 grp=1 RX[8x128]=0x1900-0x1d80 TX[8x128]=0x1d80-0x2200 [ 3.871591] tegra-ivc ivc-b000000.rtcpu:vinotify@12c0: vinotify: ver=0 grp=1 RX[64x128]=0x2200-0x4280 TX[64x128]=0x4280-0x6300 [ 3.872277] tegra-ivc ivc-b000000.rtcpu:mods@32c0: mods: ver=0 grp=1 RX[1x64]=0x6300-0x63c0 TX[1x64]=0x63c0-0x6480 [ 3.872347] tegra-ivc ivc-b000000.rtcpu:ivccontrol@52c0: ivccontrol: ver=0 grp=1 RX[16x320]=0x6480-0x7900 TX[16x320]=0x7900-0x8d80 [ 3.872397] tegra-ivc ivc-b000000.rtcpu:ivccapture@72c0: ivccapture: ver=0 grp=1 RX[16x64]=0x8d80-0x9200 TX[16x64]=0x9200-0x9680 [ 3.872448] tegra-ivc ivc-b000000.rtcpu:dbg@7c00: dbg: ver=0 grp=1 RX[1x384]=0x9680-0x9880 TX[1x384]=0x9880-0x9a80 [ 3.872570] tegra-ivc ivc-b000000.rtcpu:dbg@7e00: dbg: ver=0 grp=1 RX[1x8192]=0x9a80-0xbb00 TX[1x8192]=0xbb00-0xdb80 [ 3.872870] tegra186-cam-rtcpu b000000.rtcpu: using cam RTCPU IRQ (51) [ 3.872871] tegra186-cam-rtcpu b000000.rtcpu: tegra_camrtc_mon_create is successful [ 3.875256] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit with 64 bit addr [ 3.879233] mmc1: SDHCI controller on 3440000.sdhci [3440000.sdhci] using ADMA 64-bit with 64 bit addr [ 3.891258] gpio tegra-gpio wake71 for gpio=125(P:5) [ 3.891300] mmc2: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit with 64 bit addr [ 3.948810] mmc0: mmc_decode_ext_csd: CMDQ supported: depth: 31, cmdq_support: 1 [ 3.949583] ata1: SATA link down (SStatus 0 SControl 300) [ 3.962325] mmc0: periodic cache flush enabled [ 3.962340] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 3.963032] mmcblk0: mmc0:0001 032G34 29.1 GiB [ 3.963355] mmcblk0boot0: mmc0:0001 032G34 partition 1 4.00 MiB [ 3.963618] mmcblk0boot1: mmc0:0001 032G34 partition 2 4.00 MiB [ 3.963842] mmcblk0rpmb: mmc0:0001 032G34 partition 3 4.00 MiB [ 3.966663] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 [ 3.984003] tegra186-cam-rtcpu b000000.rtcpu: firmware version cpu=sce cmd=5 sha1=3ecb1dca25fa98771f988f238c025334776c9a96 [ 3.985752] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 3.986229] tegra186-aondbg aondbg: aondbg driver probe() OK [ 3.986398] register_ari_mca_banks: Registered MCA ROC:IOB [ 3.986473] register_ari_mca_banks: Registered MCA ROC:CCE [ 3.987115] tegra18-bridge 2390000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 3.987119] tegra18-bridge 2390000.axi2apb: enabled timeout = 11155000 [ 3.987121] tegra18-bridge 2390000.axi2apb: bridge probed OK [ 3.987184] tegra18-bridge 23a0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 3.987187] tegra18-bridge 23a0000.axi2apb: enabled timeout = 11155000 [ 3.987189] tegra18-bridge 23a0000.axi2apb: bridge probed OK [ 3.987293] tegra18-bridge 23b0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 3.987296] tegra18-bridge 23b0000.axi2apb: enabled timeout = 11155000 [ 3.987299] tegra18-bridge 23b0000.axi2apb: bridge probed OK [ 3.987359] tegra18-bridge 23c0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 3.987362] tegra18-bridge 23c0000.axi2apb: enabled timeout = 11155000 [ 3.987365] tegra18-bridge 23c0000.axi2apb: bridge probed OK [ 3.987423] tegra18-bridge 23d0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 3.987425] tegra18-bridge 23d0000.axi2apb: enabled timeout = 11155000 [ 3.987428] tegra18-bridge 23d0000.axi2apb: bridge probed OK [ 3.987486] tegra18-bridge 2100000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 3.987491] tegra18-bridge 2100000.axip2p: enabled timeout = 11155000 [ 3.987494] tegra18-bridge 2100000.axip2p: bridge probed OK [ 3.987553] tegra18-bridge 2110000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 3.987558] tegra18-bridge 2110000.axip2p: enabled timeout = 11155000 [ 3.987561] tegra18-bridge 2110000.axip2p: bridge probed OK [ 3.987621] tegra18-bridge 2120000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 3.987628] tegra18-bridge 2120000.axip2p: enabled timeout = 11155000 [ 3.987630] tegra18-bridge 2120000.axip2p: bridge probed OK [ 3.987693] tegra18-bridge 2130000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 3.987698] tegra18-bridge 2130000.axip2p: enabled timeout = 11155000 [ 3.987701] tegra18-bridge 2130000.axip2p: bridge probed OK [ 3.987776] tegra18-bridge 2140000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 3.987780] tegra18-bridge 2140000.axip2p: enabled timeout = 11155000 [ 3.987782] tegra18-bridge 2140000.axip2p: bridge probed OK [ 3.987840] tegra18-bridge 2150000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 3.987845] tegra18-bridge 2150000.axip2p: enabled timeout = 11155000 [ 3.987848] tegra18-bridge 2150000.axip2p: bridge probed OK [ 3.987905] tegra18-bridge 2160000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 3.987911] tegra18-bridge 2160000.axip2p: enabled timeout = 11155000 [ 3.987913] tegra18-bridge 2160000.axip2p: bridge probed OK [ 3.987990] tegra18-bridge 2170000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 3.987995] tegra18-bridge 2170000.axip2p: enabled timeout = 11155000 [ 3.987998] tegra18-bridge 2170000.axip2p: bridge probed OK [ 3.988063] tegra18-bridge 2180000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 3.988069] tegra18-bridge 2180000.axip2p: enabled timeout = 11155000 [ 3.988071] tegra18-bridge 2180000.axip2p: bridge probed OK [ 3.988153] tegra18-bridge 2190000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 3.988158] tegra18-bridge 2190000.axip2p: enabled timeout = 11155000 [ 3.988160] tegra18-bridge 2190000.axip2p: bridge probed OK [ 3.988225] tegra18_a57_serr_init: on CPU 1 a Denver Core [ 3.988286] tegra18x_actmon d230000.actmon: in actmon_register()... [ 3.988937] tegra18x_actmon d230000.actmon: initialization Completed for the device mc_all [ 3.989630] hw perfevents: enabled with denver15_uncore_pmu PMU driver, 3 counters available [ 3.989786] denver_knobs_init:MTS_VERSION:43068234 [ 3.991800] nvadsp 2993000.adsp: in probe()... [ 3.993178] nvadsp 2993000.adsp: nvadsp_app_module_probe [ 3.996521] nvpmodel: initialized successfully [ 3.998655] trusty-virtio trusty:virtio: initializing [ 3.998996] trusty_ipc virtio0: vring0: va(pa) ffffffc1e5190000(0) qsz 32 notifyid 1 [ 3.999007] trusty_ipc virtio0: vring1: va(pa) ffffffc1e5192000(0) qsz 32 notifyid 2 [ 3.999306] trusty-virtio trusty:virtio: initializing done [ 3.999428] trusty_ipc virtio0: is online [ 4.001786] usbcore: registered new interface driver snd-usb-audio [ 4.038696] OPE platform probe [ 4.038791] OPE platform probe successful [ 4.042633] input: tegra-hda HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input0 [ 4.042870] input: tegra-hda HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input1 [ 4.068089] usb 1-2: new low-speed USB device number 2 using tegra-xusb [ 4.087319] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 4.087391] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 4.087461] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 4.087525] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 4.087592] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 4.087660] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 4.087724] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 4.087788] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 4.087852] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 4.087917] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 4.087984] tegra-asoc: sound: ADMAIF11 <-> ADMAIF11 mapping ok [ 4.088049] tegra-asoc: sound: ADMAIF12 <-> ADMAIF12 mapping ok [ 4.088115] tegra-asoc: sound: ADMAIF13 <-> ADMAIF13 mapping ok [ 4.088187] tegra-asoc: sound: ADMAIF14 <-> ADMAIF14 mapping ok [ 4.088253] tegra-asoc: sound: ADMAIF15 <-> ADMAIF15 mapping ok [ 4.088320] tegra-asoc: sound: ADMAIF16 <-> ADMAIF16 mapping ok [ 4.088389] tegra-asoc: sound: ADMAIF17 <-> ADMAIF17 mapping ok [ 4.088454] tegra-asoc: sound: ADMAIF18 <-> ADMAIF18 mapping ok [ 4.088517] tegra-asoc: sound: ADMAIF19 <-> ADMAIF19 mapping ok [ 4.088584] tegra-asoc: sound: ADMAIF20 <-> ADMAIF20 mapping ok [ 4.097561] usb 1-2: New USB device found, idVendor=413c, idProduct=2005 [ 4.097566] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.097569] usb 1-2: Product: DELL USB Keyboard [ 4.097572] usb 1-2: Manufacturer: DELL [ 4.104711] input: DELL DELL USB Keyboard as /devices/3530000.xhci/usb1/1-2/1-2:1.0/0003:413C:2005.0001/input/input2 [ 4.110434] u32 classifier [ 4.110435] Actions configured [ 4.110493] Initializing XFRM netlink socket [ 4.111047] NET: Registered protocol family 10 [ 4.111630] NET: Registered protocol family 17 [ 4.111639] NET: Registered protocol family 15 [ 4.111697] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.111733] Bluetooth: RFCOMM socket layer initialized [ 4.111741] Bluetooth: RFCOMM ver 1.11 [ 4.111745] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.111748] Bluetooth: HIDP socket layer initialized [ 4.111762] 9pnet: Installing 9P2000 support [ 4.111795] Key type dns_resolver registered [ 4.114136] Registered cp15_barrier emulation handler [ 4.114902] Registered setend emulation handler [ 4.115762] registered taskstats version 1 [ 4.119175] isp 15600000.isp: initialized [ 4.123339] nvcsi 150c0000.nvcsi: initialized [ 4.128665] tegra-vi4 15700000.vi: initialized [ 4.129073] gpio tegra-gpio-aon wake29 for gpio=56(FF:0) [ 4.129143] gpio tegra-gpio-aon wake67 for gpio=57(FF:1) [ 4.129207] gpio tegra-gpio-aon wake68 for gpio=58(FF:2) [ 4.129322] input: gpio-keys as /devices/gpio-keys/input/input3 [ 4.162169] mmc1: hw tuning done ... [ 4.169094] mmc1: new ultra high speed SDR104 SDIO card at address 0001 [ 4.171685] hid-generic 0003:413C:2005.0001: input,hidraw0: USB HID v1.10 Keyboard [DELL DELL USB Keyboard] on usb-3530000.xhci-2/input0 [ 4.207431] tegra_rtc c2a0000.rtc: setting system clock to 2000-01-01 01:00:35 UTC (946688435) [ 4.208493] mmcblk mmc0:0001: Card claimed for testing. [ 4.237047] bpmp: mounted debugfs mirror [ 4.238224] bwmgr: missing cdev-type property [ 4.244298] spmic-ldo0: disabling [ 4.244520] spmic-ldo1: disabling [ 4.244715] en-vdd-sd: disabling [ 4.244719] vdd-usb0-5v: disabling [ 4.244723] vdd-usb1-5v: disabling [ 4.244726] vdd-3v3: disabling [ 4.244729] en-vdd-vcm-2v8: disabling [ 4.244732] vdd-sys-bl: disabling [ 4.244736] ALSA device list: [ 4.244739] #0: tegra-hda at 0x3518000 irq 381 [ 4.244741] #1: tegra-snd-t186ref-mobile-rt565x [ 4.287272] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 4.310684] usb 1-3: New USB device found, idVendor=04f3, idProduct=249f [ 4.310689] usb 1-3: New USB device strings: Mfr=4, Product=14, SerialNumber=0 [ 4.310693] usb 1-3: Product: Touchscreen [ 4.310696] usb 1-3: Manufacturer: ELAN [ 4.318276] input: ELAN Touchscreen as /devices/3530000.xhci/usb1/1-3/1-3:1.0/0003:04F3:249F.0002/input/input4 [ 4.318658] hid-multitouch 0003:04F3:249F.0002: input,hidraw1: USB HID v1.10 Device [ELAN Touchscreen] on usb-3530000.xhci-3/input0 [ 5.366812] tegradc 15220000.nvdisplay: blank - powerdown [ 5.369779] nct1008_nct72 7-004c: !!!Found deprecated property!!! [ 5.369782] nct1008_nct72 7-004c: success parsing dt [ 5.369881] nct1008_nct72 7-004c: success in enabling tmp451 VDD rail [ 5.402405] nct1008_nct72 7-004c: LOC shutdown limit 107 [ 5.402997] nct1008_nct72 7-004c: EXT shutdown limit 107 [ 5.407382] extcon-disp-state external-connection:disp-state: cable 46 state 0 [ 5.407385] Extcon AUX0(HDMI) disable [ 5.429303] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 5.430067] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 5.435911] nct1008_nct72 7-004c: initial LOC temp: 34000 [ 5.436259] nct1008_nct72 7-004c: initial EXT temp: 46500 [ 5.436951] nct1008_nct72 7-004c: hi_b:-11, lo_b:0 [ 5.437388] gpio tegra-gpio-aon wake35 for gpio=16(V:0) [ 5.437608] nct1008_nct72 7-004c: nct1008_probe: initialized [ 5.442705] tegradc 15220000.nvdisplay: unblank [ 5.443673] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 5.443792] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 5.445233] Parent Clock set for DC plld3 [ 5.448840] tegradc 15220000.nvdisplay: hdmi: tmds rate:85500K prod-setting:prod_c_hdmi_54m_111m [ 5.450194] tegradc 15220000.nvdisplay: hdmi: get RGB quant from EDID. [ 5.450201] tegradc 15220000.nvdisplay: hdmi: get YCC quant from EDID. [ 5.485669] extcon-disp-state external-connection:disp-state: cable 46 state 1 [ 5.485671] Extcon AUX0(HDMI) enable [ 6.865244] Wake76 for irq=199 [ 6.865247] Wake77 for irq=199 [ 6.865248] Wake78 for irq=199 [ 6.865250] Wake79 for irq=199 [ 6.865251] Wake80 for irq=199 [ 6.865253] Wake81 for irq=199 [ 6.865254] Wake82 for irq=199 [ 6.865284] tegra-xusb 3530000.xhci: Upgrade port 0 to USB3.0 [ 6.865288] tegra-xusb 3530000.xhci: Upgrade port 1 to USB3.0 [ 6.967529] usb usb2: usb_suspend_both: status 0 [ 7.682576] extcon-disp-state external-connection:disp-state: cable 40 state 1 [ 7.684368] Freeing unused kernel memory: 8576K [ 7.695943] Extcon HDMI: HPD enabled [ 7.695980] tegradc 15220000.nvdisplay: hdmi: plugged [ 7.730919] L4T-INITRD Build DATE: Sat Jan 1 01:00:39 UTC 2000 [ 7.745657] Root device found: mmcblk0p1 [ 7.752799] Found dev node: /dev/mmcblk0p1 [ 7.901387] EXT4-fs (mmcblk0p1): 13 orphan inodes deleted [ 7.907632] EXT4-fs (mmcblk0p1): recovery complete [ 7.919449] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.929811] Rootfs mounted over mmcblk0p1 [ 7.966527] Switching from initrd to actual rootfs [ 8.109943] systemd[1]: System time before build time, advancing clock. [ 8.158671] ip_tables: (C) 2000-2006 Netfilter Core Team [ 8.210710] cgroup: cgroup2: unknown option "nsdelegate" [ 8.238098] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 8.264425] systemd[1]: Detected architecture arm64. [ 8.370203] systemd[1]: Set hostname to . [ 8.492019] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 8.510958] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 8.569768] random: crng init done [ 8.731643] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.747059] systemd[1]: Created slice User and Session Slice. [ 8.755284] systemd[1]: Reached target Swap. [ 8.763398] systemd[1]: Created slice System Slice. [ 8.770961] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.856761] gpio tegra-gpio-aon wake30 for gpio=60(FF:4) [ 8.885580] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 9.124404] systemd-journald[2363]: Received request to flush runtime journal from PID 1 [ 10.122917] tegra-vi4 15700000.vi: Entity type for entity adv7180 6-0021 was not initialized! [ 13.307847] CPU1: shutdown [ 13.365791] CPU2: shutdown [ 16.059152] vdd-1v8: voltage operation not allowed [ 16.066544] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 16.095447] vdd-1v8: voltage operation not allowed [ 16.101643] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 16.132302] vdd-1v8: voltage operation not allowed [ 16.138178] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 16.149714] vdd-1v8: voltage operation not allowed [ 16.155551] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 16.266932] vdd-1v8: voltage operation not allowed [ 16.271768] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 16.279486] vdd-1v8: voltage operation not allowed [ 16.284343] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 16.292531] vdd-1v8: voltage operation not allowed [ 16.297367] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) Ubuntu 18.04.2 LTS nvidia-desktop ttyS0 nvidia-desktop login: