[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.140-rt93+ (oe-user@oe-host) (gcc version 8.3.0 (GCC) ) #1 SMP PREEMPT RT Thu Jan 28 12:25:47 UTC 2021 [ 0.000000] Boot CPU: AArch64 Processor [411fd071] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 32, [ 0.000000] OF: fdt: - 80000000 , 7ee00000 [ 0.000000] OF: fdt: - 100000000 , 7f200000 [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node iram-carveout, compatible id nvidia,iram-carveout [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fac00000 [ 0.000000] On node 0 totalpages: 1039872 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 519168 pages, LIFO batch:31 [ 0.000000] Normal zone: 8136 pages used for memmap [ 0.000000] Normal zone: 520704 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 25 pages/cpu @ffffffc0fefd3000 s65216 r8192 d28992 u102400 [ 0.000000] pcpu-alloc: s65216 r8192 d28992 u102400 alloc=25*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] CPU features: enabling workaround for ARM erratum 832075 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1023544 [ 0.000000] Kernel command line: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,2 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff780000 core_edp_mv=1075 core_edp_ma=4000 console=ttyGS0,115200 fbcon=map:0 net.ifnames=0 sdhci_tegra.en_boot_part_access=1 quiet root=/dev/mmcblk0p1 rw rootwait [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 98304 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 131072 bytes [ 0.000000] early log buf free: 29712(90%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Memory: 3566688K/4159488K available (15038K kernel code, 2950K rwdata, 9868K rodata, 8576K init, 627K bss, 117664K reserved, 475136K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f30000 ( 15040 KB) [ 0.000000] .rodata : 0xffffff8008f30000 - 0xffffff80098e0000 ( 9920 KB) [ 0.000000] .init : 0xffffff80098e0000 - 0xffffff800a140000 ( 8576 KB) [ 0.000000] .data : 0xffffff800a140000 - 0xffffff800a421808 ( 2951 KB) [ 0.000000] .bss : 0xffffff800a421808 - 0xffffff800a4be618 ( 628 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf03fc8000 ( 63 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc0ff200000 ( 4082 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] /interrupt-controller@60004000: 192 interrupts forwarded to /interrupt-controller [ 0.000000] t210 clock and reset probe [ 0.000000] tegra-pmc: get_secure_pmc_setting: done secure_pmc=1 [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000005] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.001472] Console: colour dummy device 80x25 [ 0.001499] kmemleak: Kernel memory leak detector disabled [ 0.001522] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=19200) [ 0.001526] pid_max: default: 32768 minimum: 301 [ 0.001979] Security Framework initialized [ 0.002218] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.002226] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.003407] ftrace: allocating 47085 entries in 184 pages [ 0.174898] sched-energy: CPU device node has no sched-energy-costs [ 0.174935] ASID allocator initialised with 65536 entries [ 0.193508] tegra-id: chipid=22117. [ 0.193521] tegra-id: opt_subrevision=0. [ 0.193538] Tegra Speedo/IDDQ fuse revision 4 [ 0.193544] Tegra: CPU Speedo ID 9, SoC Speedo ID 0, GPU Speedo ID 2 [ 0.193548] Tegra: CPU Process ID 0, SoC Process ID 1, GPU Process ID 0 [ 0.193554] Tegra: CPU Speedo Value 2050, SoC Speedo Value 1951, GPU Speedo Value 2049 [ 0.193558] Tegra: CPU IDDQ Value 1772, SoC IDDQ Value 1916, GPU IDDQ Value 2315 [ 0.193579] Tegra Revision: A02 SKU: 0x8f CPU Process: 0 SoC Process: 1 [ 0.193596] DTS File Name: /media/novadembe_data/novadem-tegra/build_devkit/tmp/work-shared/jetcam-nano/kernel-source/arch/arm64/boot/dts/../../../../nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0002-p3449-0000-a02.dts [ 0.193603] DTB Build time: Jan 28 2021 12:25:47 [ 0.211067] CPU1: Booted secondary processor [411fd071] [ 0.222995] CPU2: Booted secondary processor [411fd071] [ 0.234964] CPU3: Booted secondary processor [411fd071] [ 0.235101] Brought up 4 CPUs [ 0.235110] SMP: Total of 4 processors activated. [ 0.235120] CPU features: detected feature: 32-bit EL0 Support [ 0.235414] CPU: All CPU(s) started at EL2 [ 0.235433] alternatives: patching kernel code [ 0.243751] devtmpfs: initialized [ 0.278471] Initilizing CustomIPI irq domain [ 0.278818] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.278841] futex hash table entries: 1024 (order: 5, 131072 bytes) [ 0.289991] pinctrl core: initialized pinctrl subsystem [ 0.290581] OS set in device tree is not L4T. [ 0.290918] regulator-dummy: no parameters [ 0.291154] Initializing plugin-manager [ 0.291282] Plugin module not found [ 0.294886] NET: Registered protocol family 16 [ 0.296122] pstore: using zlib compression [ 0.296157] console [pstore-1] enabled [ 0.296161] pstore: Registered ramoops as persistent store backend [ 0.296167] ramoops: attached 0x200000@0xb0000000, ecc: 0/0 [ 0.296974] cpuidle: using governor menu [ 0.300467] tegra_smmu 70019000.iommu: Loaded Tegra IOMMU driver [ 0.301707] vdso: 2 pages (1 code @ ffffff8008f37000, 1 data @ ffffff800a144000) [ 0.301728] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.303589] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.305586] Serial: AMBA PL011 UART driver [ 0.306054] tegra_powergate_init: DONE [ 0.306111] DTS File Name: /media/novadembe_data/novadem-tegra/build_devkit/tmp/work-shared/jetcam-nano/kernel-source/arch/arm64/boot/dts/../../../../nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0002-p3449-0000-a02.dts [ 0.306119] DTB Build time: Jan 28 2021 12:25:47 [ 0.307469] Tegra reboot handler registered. [ 0.311634] iommu: Adding device tegra-carveouts to group 0 [ 0.311764] platform tegra-carveouts: domain=ffffffc0f94eec18 allocates as[0]=ffffffc0f97f0100 [ 0.312162] iommu: Adding device smmu_test to group 1 [ 0.312225] platform smmu_test: domain=ffffffc0f94eed98 allocates as[0]=ffffffc0f97f01e8 [ 0.313021] mc: mapped MMIO address: 0xffffff800802e000 -> 0x70019000 [ 0.313114] mc: mapped MMIO address: 0xffffff8008065000 -> 0x7001c000 [ 0.313179] mc: mapped MMIO address: 0xffffff8008079000 -> 0x7001d000 [ 0.313189] nv-tegra-mc 70019000.mc: No mssnvlink node [ 0.313206] mc-err: mcerr ops are set to t21x [ 0.322997] iommu: Adding device 70090000.xusb to group 2 [ 0.323294] iommu: Adding device 70006000.serial to group 3 [ 0.323358] platform 70006000.serial: domain=ffffffc0f904a558 allocates as[0]=ffffffc0f97f02d0 [ 0.323793] iommu: Adding device 70006040.serial to group 4 [ 0.324046] iommu: Adding device 70006200.serial to group 5 [ 0.324332] iommu: Adding device 70006300.serial to group 6 [ 0.324513] iommu: Adding device sound to group 7 [ 0.324565] platform sound: domain=ffffffc0f904a918 allocates as[0]=ffffffc0f97f03b8 [ 0.325139] iommu: Adding device 7000d400.spi to group 8 [ 0.325405] iommu: Adding device 7000d600.spi to group 9 [ 0.325753] iommu: Adding device 50000000.host1x to group 10 [ 0.326020] iommu: Adding device 54080000.vi to group 11 [ 0.326434] iommu: Adding device 54600000.isp to group 12 [ 0.326688] iommu: Adding device 54680000.isp to group 13 [ 0.326961] iommu: Adding device tegradc.0 to group 14 [ 0.327019] platform tegradc.0: domain=ffffffc0f90ae018 allocates as[0]=ffffffc0f97f04a0 [ 0.327568] platform tegradc.0: IOVA linear map 0x00000000d7000000(19000000) [ 0.327886] iommu: Adding device tegradc.1 to group 15 [ 0.327963] platform tegradc.1: domain=ffffffc0f90ae198 allocates as[0]=ffffffc0f97f0588 [ 0.328507] platform tegradc.1: IOVA linear map 0x00000000d7000000(19000000) [ 0.328753] iommu: Adding device 54340000.vic to group 16 [ 0.328943] iommu: Adding device 544c0000.nvenc to group 17 [ 0.329171] iommu: Adding device 54500000.tsec to group 18 [ 0.329367] iommu: Adding device 54100000.tsecb to group 19 [ 0.329551] iommu: Adding device 54480000.nvdec to group 20 [ 0.329738] iommu: Adding device 54380000.nvjpg to group 21 [ 0.330488] iommu: Adding device 546c0000.i2c to group 22 [ 0.330809] iommu: Adding device 57000000.gpu to group 23 [ 0.330874] platform 57000000.gpu: domain=ffffffc0f90ae858 allocates as[0]=ffffffc0f97f0670 [ 0.330920] platform 57000000.gpu: domain=ffffffc0f90ae858 allocates as[1]=ffffffc0f97f0758 [ 0.330961] platform 57000000.gpu: domain=ffffffc0f90ae858 allocates as[2]=ffffffc0f97f0840 [ 0.331001] platform 57000000.gpu: domain=ffffffc0f90ae858 allocates as[3]=ffffffc0f97f0928 [ 0.331843] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.331853] tegra-pmc 7000e400.pmc: scratch reg offset dts data not present [ 0.331864] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET [ 0.331868] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_WARM [ 0.331872] tegra-pmc: ### PMC reset status reg: 0x0 [ 0.346230] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.346239] tegra-pmc: Clear bootloader IO dpd settings [ 0.346257] tegra-pmc 7000e400.pmc: IO padctrl driver initialized [ 0.346320] tegra-pmc 7000e400.pmc: PMC: Successfully configure bootrom reset commands [ 0.346608] iommu: Adding device 70012000.se to group 24 [ 0.347367] iommu: Adding device 7000c000.i2c to group 25 [ 0.347650] iommu: Adding device 7000c400.i2c to group 26 [ 0.347896] iommu: Adding device 7000c500.i2c to group 27 [ 0.348211] iommu: Adding device 7000d000.i2c to group 28 [ 0.348454] iommu: Adding device 7000d100.i2c to group 29 [ 0.348714] iommu: Adding device sdhci-tegra.3 to group 30 [ 0.348782] platform sdhci-tegra.3: domain=ffffffc0f90aef18 allocates as[0]=ffffffc0f97f0a10 [ 0.349281] iommu: Adding device sdhci-tegra.2 to group 31 [ 0.349360] platform sdhci-tegra.2: domain=ffffffc0f912a0d8 allocates as[0]=ffffffc0f97f0af8 [ 0.349799] iommu: Adding device sdhci-tegra.0 to group 32 [ 0.349852] platform sdhci-tegra.0: domain=ffffffc0f912a258 allocates as[0]=ffffffc0f97f0be0 [ 0.350685] iommu: Adding device 700d0000.xudc to group 33 [ 0.353774] vdd-ac-bat: 5000 mV [ 0.354126] vdd-5v0-sys: 5000 mV [ 0.355024] vdd-5v0-hdmi: supplied by vdd-5v0-sys [ 0.355113] vdd-5v0-hdmi: 5000 mV [ 0.355475] vdd-1v8-sys: 1800 mV [ 0.355862] vdd-fan: supplied by vdd-5v0-sys [ 0.355933] vdd-fan: 5000 mV [ 0.356349] vdd-usb-vbus: supplied by vdd-5v0-sys [ 0.356387] vdd-usb-vbus: 5000 mV [ 0.356881] vdd-usb-vbus2: 5000 mV [ 0.369823] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.372173] gpio gpiochip0: gpio-line-names specifies 240 line names but there are 256 lines on the chip [ 0.373393] GPIO line 200 (camera-control-output-low) hogged as output/low [ 0.373431] GPIO line 6 (system-suspend-gpio) hogged as output/high [ 0.373752] gpiochip_setup_dev: registered GPIOs 0 to 255 on device: gpiochip0 (tegra-gpio) [ 0.381630] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.381932] SCSI subsystem initialized [ 0.382184] libata version 3.00 loaded. [ 0.382431] usbcore: registered new interface driver usbfs [ 0.382471] usbcore: registered new interface driver hub [ 0.382543] usbcore: registered new device driver usb [ 0.386476] max77620 4-003c: PMIC Version OTP:0x35 and ES:0x8 [ 0.389339] vdd-core: 1000 <--> 1162 mV at 1075 mV [ 0.390341] vdd-ddr-1v1: Bringing 1125000uV into 1150000-1150000uV [ 0.391226] vdd-ddr-1v1: 1150 mV [ 0.392227] vdd-pre-reg-1v35: 1350 mV [ 0.393227] vdd-1v8: 1800 mV [ 0.394236] avdd-sys-1v2: 1200 mV [ 0.395225] vdd-pex-1v0: 1050 mV [ 0.395918] vddio-sdmmc-ap: 1800 <--> 3300 mV at 3300 mV [ 0.396496] max77620-ldo3: at 3100 mV [ 0.399013] vdd-rtc: 850 <--> 1100 mV at 1000 mV [ 0.399641] max77620-ldo5: at 3100 mV [ 0.402011] vddio-sdmmc3-ap: 1800 <--> 3300 mV at 2800 mV [ 0.404010] avdd-1v05-pll: 1050 mV [ 0.406009] avdd-io-hdmi-dp: 1050 mV [ 0.408709] GPIO line 505 (spmic-default-output-high) hogged as output/high [ 0.409082] gpiochip_setup_dev: registered GPIOs 504 to 511 on device: gpiochip1 (max77620-gpio) [ 0.409348] max77620 4-003c: max77620 probe successful [ 0.412241] media: Linux media interface: v0.10 [ 0.412280] Linux video capture interface: v2.00 [ 0.413137] pps_core: LinuxPPS API ver. 1 registered [ 0.413141] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.413155] PTP clock support registered [ 0.416242] tegra210-emc 7001b000.external-memory-controller: validated EMC DFS table [ 0.416964] Advanced Linux Sound Architecture Driver Initialized. [ 0.417629] Bluetooth: Core ver 2.22 [ 0.417668] NET: Registered protocol family 31 [ 0.417671] Bluetooth: HCI device and connection manager initialized [ 0.417684] Bluetooth: HCI socket layer initialized [ 0.417692] Bluetooth: L2CAP socket layer initialized [ 0.417745] Bluetooth: SCO socket layer initialized [ 0.419424] tegra210_dvfs: no clock found for sdmmc2_ddr [ 0.419439] tegra210_dvfs: no clock found for sdmmc4_ddr [ 0.419485] tegra210_dvfs: no clock found for sdmmc1_ddr [ 0.419499] tegra210_dvfs: no clock found for sdmmc3_ddr [ 0.422062] tegra_dvfs: Unable to get vdd-cpu rail for step info, defering probe [ 0.423210] vdd-3v3-sys: supplied by vdd-5v0-sys [ 0.423281] vdd-3v3-sys: 3300 mV [ 0.423528] vdd-1v8-sys: supplied by vdd-3v3-sys [ 0.425074] vdd-usb-vbus2: supplied by vdd-3v3-sys [ 0.425562] vdd-3v3-sd: supplied by vdd-3v3-sys [ 0.425604] vdd-3v3-sd: 3300 mV [ 0.426691] avdd-io-edp-1v05: supplied by avdd-1v05-pll [ 0.426737] avdd-io-edp-1v05: 1050 mV [ 0.427199] vdd-usb-hub-en: supplied by vdd-1v8-sys [ 0.427247] vdd-usb-hub-en: 5000 mV [ 0.428444] camchar: rtcpu character device driver loaded [ 0.429165] extcon-gpio-states extcon:extcon@1: Cable state:1, cable id:1 [ 0.430415] clocksource: Switched to clocksource arch_sys_counter [ 0.481260] VFS: Disk quotas dquot_6.6.0 [ 0.481402] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.481913] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.482592] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000d7000000, size=0x19000000 [ 0.482612] dma-vpr: heap size is not multiple of cma_chunk_size heap_info->num_chunks (13) rem_chunk_size(0x1000000) [ 0.482815] cma: enabled page replacement for spfn=d7000, epfn=f0000 [ 0.482820] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 0.482829] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 0.482856] tegra-carveouts tegra-carveouts: iram :dma coherent mem declare 0x0000000040001000,258048 [ 0.482862] tegra-carveouts tegra-carveouts: assigned reserved memory node iram-carveout [ 0.482877] nvmap: nvmap_select_cache_ops() nvmap cache ops set to set/ways [ 0.482884] nvmap_page_pool_init: Total RAM pages: 1010456 [ 0.482889] nvmap_page_pool_init: nvmap page pool size: 126307 pages (493 MB) [ 0.482991] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.483645] misc nvmap: created heap iram base 0x0000000040001000 size (252KiB) [ 0.484563] misc nvmap: created heap vpr base 0x00000000d7000000 size (409600KiB) [ 0.492793] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type AO-therm [ 0.493136] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type CPU-therm [ 0.493365] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.493583] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.493746] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 0.494016] pre_t19x_iso_plat_init(): iso emc max clk=1600000KHz [ 0.494020] pre_t19x_iso_plat_init(): max_iso_bw=11520000KB [ 0.494505] NET: Registered protocol family 2 [ 0.495586] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.495843] TCP bind hash table entries: 32768 (order: 8, 1835008 bytes) [ 0.497676] TCP: Hash tables configured (established 32768 bind 32768) [ 0.497846] UDP hash table entries: 2048 (order: 6, 262144 bytes) [ 0.498119] UDP-Lite hash table entries: 2048 (order: 6, 262144 bytes) [ 0.499096] NET: Registered protocol family 1 [ 0.499983] RPC: Registered named UNIX socket transport module. [ 0.499987] RPC: Registered udp transport module. [ 0.499990] RPC: Registered tcp transport module. [ 0.499993] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.500008] PCI: CLS 0 bytes, default 64 [ 0.500305] Trying to unpack rootfs image as initramfs... [ 0.612170] Freeing initrd memory: 2024K [ 0.622184] host1x 50000000.host1x: initialized [ 0.624033] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.627844] audit: initializing netlink subsys (disabled) [ 0.627920] audit: type=2000 audit(0.471:1): initialized [ 0.628733] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 0.639283] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.640720] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.641581] 9p: Installing v9fs 9p2000 file system support [ 0.645500] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.645639] io scheduler noop registered [ 0.646031] io scheduler cfq registered (default) [ 0.648558] gic 702f9000.agic: GIC IRQ controller registered [ 0.651482] iommu: Adding device 702ef000.adsp to group 34 [ 0.660565] iommu: Adding device aconnect@702c0000:adsp_audio to group 35 [ 0.660709] tegra-aconnect aconnect@702c0000: Tegra ACONNECT bus registered [ 0.661196] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_SKU_CALIB_0 = 0x9208c12 [ 0.661204] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_USB_CALIB_EXT_0 = 0x4 [ 0.663006] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.0, lane = usb2-0, function = xusb [ 0.663099] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.1, lane = usb2-1, function = xusb [ 0.663184] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.2, lane = usb2-2, function = xusb [ 0.663348] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.3, lane = pcie-0, function = pcie-x1 [ 0.663483] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.4, lane = pcie-1, function = pcie-x4 [ 0.663572] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.5, lane = pcie-2, function = pcie-x4 [ 0.663656] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.6, lane = pcie-3, function = pcie-x4 [ 0.663738] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.7, lane = pcie-4, function = pcie-x4 [ 0.663821] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.8, lane = pcie-5, function = xusb [ 0.663897] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.9, lane = pcie-6, function = xusb [ 0.670275] tegra-pwm 7000a000.pwm: PWM clk cannot sleep in ops [ 0.671840] tegra-dfll-pwm 70110000.pwm: DFLL pwm-rate: 12800000 [ 0.673783] tegra-pcie 1003000.pcie: 4x1, 1x1 configuration [ 0.675060] tegra-pcie 1003000.pcie: PCIE: Enable power rails [ 0.675624] tegra-pcie 1003000.pcie: probing port 0, using 4 lanes [ 0.676604] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 0.676839] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=750000, max_bw=1500000 [ 0.677112] Adding domain tsec-pd to PM domain host1x-pd [ 0.679035] tegra-pcie 1003000.pcie: probing port 1, using 1 lanes [ 0.679951] tsec 54500000.tsec: initialized [ 0.681541] tsec 54100000.tsecb: initialized [ 0.682189] Adding domain nvdec-pd to PM domain host1x-pd [ 0.685070] nvdec 54480000.nvdec: initialized [ 0.686065] Adding domain vic03-pd to PM domain host1x-pd [ 0.686246] Adding domain msenc-pd to PM domain host1x-pd [ 0.686445] Adding domain nvjpg-pd to PM domain host1x-pd [ 0.690018] falcon 54340000.vic: initialized [ 0.691280] falcon 544c0000.nvenc: initialized [ 0.692693] falcon 54380000.nvjpg: initialized [ 0.696833] tegra_cec 70015000.tegra_cec: dt=1 start=0x70015000 end=0x70015FFF irq=97 [ 0.696872] tegra_cec 70015000.tegra_cec: Enable clock result: 0. [ 0.696898] tegra_cec 70015000.tegra_cec: tegra_cec_init started [ 0.697012] tegradc tegradc.0: disp0 connected to head0->/host1x/sor1 [ 0.697114] display board info: id 0x0, fab 0x0 [ 0.697161] tegradc tegradc.0: tegra_dc_parse_panel_ops: panel: /host1x/sor1/hdmi-display is not active [ 0.697192] tegradc tegradc.0: err:-19 parsing panel_ops [ 0.697333] tegra_cec 70015000.tegra_cec: cec_add_sysfs ret=0 [ 0.697338] tegra_cec 70015000.tegra_cec: probed [ 0.697800] tegradc tegradc.1: disp0 connected to head1->/host1x/sor [ 0.697805] display board info: id 0x0, fab 0x0 [ 0.697842] tegradc tegradc.1: tegra_dc_parse_panel_ops: panel: /host1x/sor/dp-display is not active [ 0.697858] tegradc tegradc.1: err:-19 parsing panel_ops [ 0.707104] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 0.712294] tegra-adma 702e2000.adma: Tegra210 ADMA driver registered 22 channels [ 0.712841] tegra-fuse-burn 7000f800.efuse:efuse-burn: shutdown limit check disabled [ 0.712847] tegra-fuse-burn 7000f800.efuse:efuse-burn: Fuse burn driver initialized [ 0.713090] kfuse 7000fc00.kfuse: initialized [ 0.714051] tegra-pmc-iopower pmc-iopower: Regulator supply iopower-dbg-supply not available [ 0.714974] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 0.715856] tegra-dfll-pwm 70110000.pwm: DFLL_PWM regulator is available now [ 0.715866] vdd-cpu: 708 <--> 1322 mV at 708 mV [ 0.716231] pwm-regulator pwm_regulators:pwm-regulator@0: PWM regulator registration passed [ 0.717640] vdd-gpu: applied init 1000000uV constraint [ 0.717648] vdd-gpu: 708 <--> 1323 mV at 997 mV [ 0.718004] pwm-regulator pwm_regulators:pwm-regulator@1: PWM regulator registration passed [ 0.721547] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.721644] No Device Node present for smmu client: serial8250 !! [ 0.721651] platform serial8250: No iommus property found in DT node, got swgids from fixup(101004000) [ 0.721703] iommu: Adding device serial8250 to group 36 [ 0.723928] console [ttyS0] disabled [ 0.723996] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 63, base_baud = 25500000) is a Tegra [ 0.753191] console [ttyS0] enabled [ 0.753864] 70006300.serial: ttyS3 at MMIO 0x70006300 (irq = 66, base_baud = 25500000) is a Tegra [ 0.754743] 70006040.serial: ttyTHS1 at MMIO 0x70006040 (irq = 64, base_baud = 0) is a TEGRA_UART [ 0.755026] serial-tegra 70006200.serial: RX in PIO mode [ 0.755115] 70006200.serial: ttyTHS2 at MMIO 0x70006200 (irq = 65, base_baud = 0) is a TEGRA_UART [ 0.756003] [drm] Initialized [ 0.766980] brd: module loaded [ 0.772866] loop: module loaded [ 0.772965] tegra_profiler: version: 1.141, samples/io: 48/28 [ 0.773088] tegra_profiler: auth: init [ 0.774381] THERMAL EST: found 2 subdevs [ 0.774388] THERMAL EST num_resources: 0 [ 0.774394] [THERMAL EST subdev 0] [ 0.774461] [THERMAL EST subdev 1] [ 0.774914] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 0.774919] THERMAL EST: thz register success. [ 0.775127] THERMAL EST: end of probe, return err: 0 [ 0.776189] sd: No Scsi addr parsed to reserve index [ 0.776222] hisi_sas: driver version v1.6 [ 0.782771] libphy: Fixed MDIO Bus: probed [ 0.783337] tun: Universal TUN/TAP device driver, 1.6 [ 0.783340] tun: (C) 1999-2004 Max Krasnyansky [ 0.784195] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 0.784199] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.784251] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 0.784255] igb: Copyright (c) 2007-2014 Intel Corporation. [ 0.784295] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 0.784299] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 0.784338] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4 [ 0.784342] Copyright(c) 1999 - 2017 Intel Corporation. [ 0.785476] PPP generic driver version 2.4.2 [ 0.785650] PPP BSD Compression module registered [ 0.785655] PPP Deflate Compression module registered [ 0.785692] PPP MPPE Compression module registered [ 0.785699] NET: Registered protocol family 24 [ 0.785764] usbcore: registered new interface driver r8152 [ 0.785809] usbcore: registered new interface driver asix [ 0.785841] usbcore: registered new interface driver ax88179_178a [ 0.785873] usbcore: registered new interface driver cdc_ether [ 0.785902] usbcore: registered new interface driver net1080 [ 0.785931] usbcore: registered new interface driver cdc_subset [ 0.785964] usbcore: registered new interface driver zaurus [ 0.786008] usbcore: registered new interface driver cdc_ncm [ 0.786158] VFIO - User Level meta-driver version: 0.3 [ 0.790694] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.790735] ehci-pci: EHCI PCI platform driver [ 0.790773] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.790785] ohci-pci: OHCI PCI platform driver [ 0.790818] ohci-platform: OHCI generic platform driver [ 0.793747] tegra-xusb 70090000.xusb: USB2 port 0 has OTG_CAP [ 0.794368] tegra-xusb-padctl 7009f000.xusb_padctl: enabled OTG on UTMI pad 0 [ 0.795643] tegra-xusb 70090000.xusb: extcon 0: ffffffc0f9557800 id [ 0.797920] usbcore: registered new interface driver uas [ 0.797976] usbcore: registered new interface driver usb-storage [ 0.798077] usbcore: registered new interface driver usbserial [ 0.798501] tegra-xusb 70090000.xusb: Firmware timestamp: 2019-10-17 15:58:59 UTC, Version: 50.25 release [ 0.798570] tegra-xusb 70090000.xusb: xHCI Host Controller [ 0.798600] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 1 [ 0.799380] tegra-xusb 70090000.xusb: hcc params 0x0184f525 hci version 0x100 quirks 0x00050010 [ 0.799578] tegra-xusb 70090000.xusb: irq 61, io mem 0x70090000 [ 0.799777] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.799784] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.799789] usb usb1: Product: xHCI Host Controller [ 0.799794] usb usb1: Manufacturer: Linux 4.9.140-rt93+ xhci-hcd [ 0.799798] usb usb1: SerialNumber: 70090000.xusb [ 0.800553] hub 1-0:1.0: USB hub found [ 0.800598] hub 1-0:1.0: 5 ports detected [ 0.801202] tegra-xusb 70090000.xusb: xHCI Host Controller [ 0.801216] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 2 [ 0.801300] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 0.801389] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.801395] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.801400] usb usb2: Product: xHCI Host Controller [ 0.801464] usb usb2: Manufacturer: Linux 4.9.140-rt93+ xhci-hcd [ 0.801469] usb usb2: SerialNumber: 70090000.xusb [ 0.801934] hub 2-0:1.0: USB hub found [ 0.801970] hub 2-0:1.0: 4 ports detected [ 0.803028] tegra-xudc-new 700d0000.xudc: device count: 1 [ 0.804333] tegra-xudc-new 700d0000.xudc: USB charger detection disabled [ 0.804349] tegra-xudc-new 700d0000.xudc: vbus state: 1 [ 0.804366] tegra-xudc-new 700d0000.xudc: device mode on: 0 [ 0.804393] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 0 [ 0.804476] tegra-xudc-new 700d0000.xudc: active: 0 => 1 [ 0.805098] mousedev: PS/2 mouse device common for all mice [ 0.805187] usbcore: registered new interface driver xpad [ 0.906611] usb usb1: usb_suspend_both: status 0 [ 0.936506] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 0.938918] rtc rtc1: alarm rtc device [ 0.938937] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 0.938971] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 0.939482] i2c /dev entries driver [ 0.940944] pca954x 6-0070: vcc-pullup regulator not found [ 0.940964] pca954x 6-0070: pca954x_probe: forcing device bus number, start 30. [ 0.940969] pca954x 6-0070: device detect skipped. [ 0.941384] i2c i2c-6: Added multiplexed i2c bus 30 [ 0.941661] i2c i2c-6: Added multiplexed i2c bus 31 [ 0.941858] i2c i2c-6: Added multiplexed i2c bus 32 [ 0.942057] i2c i2c-6: Added multiplexed i2c bus 33 [ 0.942268] i2c i2c-6: Added multiplexed i2c bus 34 [ 0.942527] i2c i2c-6: Added multiplexed i2c bus 35 [ 0.942737] i2c i2c-6: Added multiplexed i2c bus 36 [ 0.942930] i2c i2c-6: Added multiplexed i2c bus 37 [ 0.942938] pca954x 6-0070: registered 8 multiplexed busses for I2C switch pca9548 [ 0.944071] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 0.946603] tegra_soctherm 700e2000.soctherm: pllx_offset tz:0 max:14, min:2 [ 0.946609] tegra_soctherm 700e2000.soctherm: pllx_offset tz:2 max:8, min:4 [ 0.947158] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 0.947176] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when cpu reaches 102500 mC [ 0.947186] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when cpu reaches 100500 mC [ 0.947328] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 0.947339] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when gpu reaches 103000 mC [ 0.947347] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when gpu reaches 101000 mC [ 0.947564] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 0.947578] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when pll reaches 127000 mC [ 0.947584] tegra_soctherm 700e2000.soctherm: throttrip: pll: missing hot temperature [ 0.947773] tegra_soctherm 700e2000.soctherm: failed to register sensor: -19 [ 0.948647] tegra_aotag tegra-aotag: Registering sensor 0 [ 0.948707] tegra_aotag tegra-aotag: Invalid temp readout [ 0.948737] tegra_aotag tegra-aotag: Invalid temp readout [ 0.948758] tegra_aotag tegra-aotag: Bound to TZ : ID 0 [ 0.948767] tegra_aotag tegra-aotag: Probe done [SUCCESS]:0 [ 0.949674] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 0.949699] tegra_dfll_action dfll-cdev-cap: Tegra DFLL 'cap cooling device' registered [ 0.949874] tegra_aotag tegra-aotag: Invalid temp readout [ 0.949907] tegra_dfll_action dfll-cdev-floor: Tegra DFLL 'floor cooling device' registered [ 0.950284] parse_throttle_dt_data: Num cap clks = 6 [ 0.950291] parse_throttle_dt_data: clk=cclk_g type=2 [ 0.950305] parse_throttle_dt_data: clk=gpu type=4 [ 0.950329] parse_throttle_dt_data: clk=cap.throttle.c2bus type=0 [ 0.950349] parse_throttle_dt_data: clk=cap.throttle.c3bus type=0 [ 0.950371] parse_throttle_dt_data: clk=cap.throttle.sclk type=0 [ 0.950375] parse_throttle_dt_data: clk=emc type=3 [ 0.950813] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 0.950932] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 0.951091] tegra_throttle_probe: probe successful. #cdevs=4 [ 0.951850] FAN dev name: pwm-fan [ 0.951944] FAN:gpio request success. [ 0.952025] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255 [ 0.952329] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 0.952576] pwm_fan_driver pwm-fan: fan tach request irq success [ 0.952586] pwm_fan_driver pwm-fan: tach period: 1000 [ 0.952696] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 0.952702] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2 [ 0.952708] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2 [ 0.952713] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2 [ 0.952717] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 0.952723] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 0.952728] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 0.952733] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 0.952738] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 0.952744] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 0.954170] device-mapper: uevent: version 1.0.3 [ 0.954758] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 0.960151] tegra210-cpufreq cpufreq: probe()...completed [ 0.960840] sdhci: Secure Digital Host Controller Interface driver [ 0.960842] sdhci: Copyright(c) Pierre Ossman [ 0.960844] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.961188] sdhci-tegra sdhci-tegra.3: Client registration for eMC Successful [ 0.965649] sdhci-tegra sdhci-tegra.2: Got CD GPIO [ 0.966010] sdhci-tegra sdhci-tegra.2: Client registration for eMC Successful [ 0.966108] sdhci-tegra sdhci-tegra.2: 3.3V set initially by voltage switch gpio [ 0.966737] sdhci-tegra sdhci-tegra.0: Got CD GPIO [ 0.967093] sdhci-tegra sdhci-tegra.0: Client registration for eMC Successful [ 0.967197] sdhci-tegra sdhci-tegra.0: wakeup init done, cdirq 300 [ 0.970941] sdhci-tegra sdhci-tegra.2: 3.3V set by voltage switch gpio [ 0.971633] tegra-se 70012000.se: tegra_se_probe: complete [ 0.972145] hidraw: raw HID events driver (C) Jiri Kosina [ 0.973161] usbcore: registered new interface driver usbhid [ 0.973163] usbhid: USB HID core driver [ 0.975259] tegra21x_actmon 6000c800.actmon: in actmon_register()... [ 0.975480] tegra21x_actmon 6000c800.actmon: initialization Completed for the device mc_all [ 0.977285] nvpmodel: initialized successfully [ 0.978368] usbcore: registered new interface driver snd-usb-audio [ 0.978463] No Device Node present for smmu client: snd-soc-dummy !! [ 0.978468] platform snd-soc-dummy: No iommus property found in DT node, got swgids from fixup(101004000) [ 0.978486] iommu: Adding device snd-soc-dummy to group 37 [ 0.984343] input: tegra-hda HDMI/DP,pcm=3 as /devices/70030000.hda/sound/card0/input0 [ 0.988437] mmc0: SDHCI controller on sdhci-tegra.3 [sdhci-tegra.3] using ADMA 64-bit with 64 bit addr [ 0.994599] mmc1: SDHCI controller on sdhci-tegra.2 [sdhci-tegra.2] using ADMA 64-bit with 64 bit addr [ 0.998504] mmc2: SDHCI controller on sdhci-tegra.0 [sdhci-tegra.0] using ADMA 64-bit with 64 bit addr [ 0.999654] OPE platform probe [ 0.999761] OPE platform probe successful [ 1.000021] OPE platform probe [ 1.000125] OPE platform probe successful [ 1.023911] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 1.024056] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 1.024190] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 1.024322] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 1.024484] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 1.024623] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 1.024758] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 1.024889] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 1.025024] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 1.025160] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 1.038166] u32 classifier [ 1.038169] Actions configured [ 1.038239] Initializing XFRM netlink socket [ 1.039036] NET: Registered protocol family 10 [ 1.039819] NET: Registered protocol family 17 [ 1.039832] NET: Registered protocol family 15 [ 1.039947] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.040065] Bluetooth: RFCOMM socket layer initialized [ 1.040086] Bluetooth: RFCOMM ver 1.11 [ 1.040092] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.040098] Bluetooth: HIDP socket layer initialized [ 1.040116] 9pnet: Installing 9P2000 support [ 1.040147] Key type dns_resolver registered [ 1.040501] Registered cp15_barrier emulation handler [ 1.040518] Registered setend emulation handler [ 1.041865] registered taskstats version 1 [ 1.042386] Adding domain ve2-pd to PM domain host1x-pd [ 1.042745] Adding domain ve-pd to PM domain host1x-pd [ 1.044890] isp 54600000.isp: initialized [ 1.047085] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 1.048073] isp 54680000.isp: initialized [ 1.048506] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 1.049738] mmcblk0boot0: mmc0:0001 DG4016 partition 1 4.00 MiB [ 1.050907] mmcblk0boot1: mmc0:0001 DG4016 partition 2 4.00 MiB [ 1.052083] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB [ 1.053090] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 [ 1.062661] last reset is due to power on reset [ 1.062665] KERNEL: PMC reset status reg: 0x0 [ 1.062742] BL: PMC reset status reg: 0x0 [ 1.062744] BL: PMIC poweroff Event Recorder: 0x40 [ 1.064255] clk_cbus_recalc_rate: no gbus parent [ 1.064261] clk_cbus_round_rate: no gbus parent [ 1.064263] clk_cbus_round_rate: no gbus parent [ 1.064270] clk_cbus_recalc_rate: no gbus parent [ 1.064367] clk_cbus_recalc_rate: no gbus parent [ 1.064371] clk_cbus_round_rate: no gbus parent [ 1.064373] clk_cbus_round_rate: no gbus parent [ 1.064377] clk_cbus_recalc_rate: no gbus parent [ 1.065096] tegra_dvfs: GPU-cap: registered [ 1.065156] tegra dvfs: vdd-cpu: nominal 1168mV, offset 708000uV, step 19200uV, scaling enabled [ 1.065159] tegra dvfs: vdd-core: nominal 1075mV, offset 1000000uV, step 12500uV, scaling enabled [ 1.065161] tegra dvfs: vdd-gpu: nominal 1068mV, offset 708000uV, step 10000uV, scaling enabled [ 1.066442] tegra_dvfs: vdd-gpu-vts: registered [ 1.066937] tegra_core_action core_dvfs_cdev_floor: Tegra CORE DVFS 'floor cooling device' registered [ 1.067533] tegra_core_action core_dvfs_cdev_cap: Tegra CORE DVFS 'cap cooling device' registered [ 1.068283] input: gpio-keys as /devices/gpio-keys/input/input1 [ 1.087647] tegra_rtc 7000e000.rtc: setting system clock to 2000-01-01 01:00:09 UTC (946688409) [ 1.088569] vi 54080000.vi: vi_probe: ++ [ 1.089653] random: fast init done [ 1.091666] vi 54080000.vi: initialized [ 1.093655] vi 54080000.vi: subdev nvcsi--1 bound [ 1.093871] mmcblk mmc0:0001: Card claimed for testing. [ 1.094969] Disable partitions left on by BL [ 1.094973] disb [ 1.095014] bwmgr: missing cdev-type property [ 1.095100] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.095107] DRAM derating cdev registered. [ 1.096104] vdd-5v0-hdmi: disabling [ 1.096109] vdd-fan: disabling [ 1.096111] vdd-usb-vbus: disabling [ 1.096114] vdd-usb-vbus2: disabling [ 1.096123] vddio-sdmmc3-ap: disabling [ 1.096216] vdd-3v3-sd: disabling [ 1.096219] avdd-io-edp-1v05: disabling [ 1.096221] vdd-usb-hub-en: disabling [ 1.096313] ALSA device list: [ 1.096316] #0: tegra-hda at 0x70038000 irq 82 [ 1.096318] #1: tegra-snd-t210ref-mobile-rt565x [ 1.100005] Freeing unused kernel memory: 8576K [ 1.102761] tegra-pcie 1003000.pcie: link 0 down, retrying [ 1.110958] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities [ 1.119369] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities [ 1.224189] EXT4-fs (mmcblk0p1): recovery complete [ 1.225064] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 1.340975] fuse init (API version 7.26) [ 1.422108] udevd[308]: starting version 3.2.9 [ 1.423945] random: udevd: uninitialized urandom read (16 bytes read) [ 1.424276] random: udevd: uninitialized urandom read (16 bytes read) [ 1.424297] random: udevd: uninitialized urandom read (16 bytes read) [ 1.447067] udevd[308]: specified group 'crypto' unknown [ 1.452464] udevd[308]: specified group 'trusty' unknown [ 1.460039] udevd[309]: starting eudev-3.2.9 [ 1.505428] tegra-pcie 1003000.pcie: link 0 down, retrying [ 1.523845] imx477 30-001a: probing v4l2 sensor. [ 1.523849] probing v4l2 sensor. [ 1.524066] imx477 30-001a: imx477_probe: name trigger_a [ 1.524075] imx477 30-001a: imx477_probe: name exposure_a [ 1.524088] imx477 30-001a: imx477_ctrls_init++ [ 1.524107] vi 54080000.vi: subdev imx477 30-001a bound [ 1.525015] I2C client: 26 [ 1.525021] imx477 30-001a: Detected IMX477 sensor [ 1.525023] Detected IMX477 sensor [ 1.612828] nvgpu: 57000000.gpu gm20b_init_clk_setup_sw:1268 [INFO] GPCPLL initial settings: NA mode, M=1, N=34, P=3 (id = 1) [ 1.657327] imx477 30-001a: imx477_open: [ 1.657762] imx477 30-001a: imx477_power_on: power on [ 1.658146] imx477 30-001a: imx477_s_stream++,enable:1 [ 1.722450] tegra_cec 70015000.tegra_cec: Can't find physical addresse. [ 1.722456] tegra_cec 70015000.tegra_cec: tegra_cec_init Done. [ 1.865171] imx477 30-001a: imx477_s_stream mode[0] [ 1.909940] tegra-pcie 1003000.pcie: link 0 down, retrying [ 1.912007] tegra-pcie 1003000.pcie: link 0 down, ignoring [ 1.927021] imx477 30-001a: imx477_s_stream++,enable:0 [ 2.093491] imx477 30-001a: imx477_power_off: power off [ 2.093631] imx477 30-001a: imx477_power_on: power on [ 2.094151] imx477 30-001a: imx477_power_off: power off [ 2.315256] tegra-pcie 1003000.pcie: link 1 down, retrying [ 2.730316] tegra-pcie 1003000.pcie: link 1 down, retrying [ 3.145461] tegra-pcie 1003000.pcie: link 1 down, retrying [ 3.147539] tegra-pcie 1003000.pcie: link 1 down, ignoring [ 3.350425] tegra-pcie 1003000.pcie: PCIE: no end points detected [ 3.350543] tegra-pcie 1003000.pcie: PCIE: Disable power rails [ 4.963213] tegra-xusb 70090000.xusb: Upgrade port 0 to USB3.0 [ 4.963218] tegra-xusb 70090000.xusb: Upgrade port 1 to USB3.0 [ 4.982218] g_serial gadget: Gadget Serial v2.4 [ 4.982222] g_serial gadget: g_serial ready [ 4.982238] tegra-xudc-new 700d0000.xudc: ep 0 (type: 0, dir: out) enabled [ 5.002728] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 5.066661] usb usb2: usb_suspend_both: status 0 [ 5.538034] g_serial gadget: high-speed config #2: CDC ACM config [ 5.538061] tegra-xudc-new 700d0000.xudc: ep 5 (type: 3, dir: in) enabled [ 5.538077] tegra-xudc-new 700d0000.xudc: ep 3 (type: 2, dir: in) enabled [ 5.538092] tegra-xudc-new 700d0000.xudc: ep 2 (type: 2, dir: out) enabled [ 6.869707] urandom_read: 4 callbacks suppressed [ 6.869710] random: dd: uninitialized urandom read (512 bytes read) [ 6.964449] tegra-xusb 70090000.xusb: entering ELPG [ 6.965484] tegra-pmc: PMC tegra_pmc_utmi_phy_enable_sleepwalk : port 1, speed 0 [ 6.965679] tegra-pmc: PMC tegra_pmc_utmi_phy_enable_sleepwalk : port 2, speed 0 [ 6.966588] tegra-xusb 70090000.xusb: entering ELPG done [ 7.129102] random: dbus-daemon: uninitialized urandom read (12 bytes read) [ 7.134477] random: dbus-daemon: uninitialized urandom read (12 bytes read) [ 11.094154] random: crng init done [ 84.177849] sdhci-tegra sdhci-tegra.2: 3.3V set by voltage switch gpio [ 84.228121] sdhci-tegra sdhci-tegra.2: 3.3V set by voltage switch gpio [ 84.283123] sdhci-tegra sdhci-tegra.2: 3.3V set by voltage switch gpio [ 84.339054] sdhci-tegra sdhci-tegra.2: 3.3V set by voltage switch gpio