Welcome to minicom 2.7.1

OPTIONS: I18n 
Compiled on Aug 13 2017, 15:25:34.
Port /dev/ttyUSB0, 12:51:51

Press CTRL-A Z for help on special keys

�L�����[0002.151] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses.
[0002.160] I> MB1 (prD-version: 2.2.0.0-t194-41334769-3540ffaa)
[0002.165] I> Boot-mode: Platform RCM
[0002.168] I> Platform: Silicon
[0002.171] I> Chip revision : A02P
[0002.17$] I> Bootrom patch version : 15 (correctly patched)
[0002.179] I> ATE fuse revision : 0x200
[0002.183] I> Ram repair fuse : 0x0
[0002.186] I> Ram Code : 0x0
[0002.188] I> rst_source: 0x0, rst_level: 0x0
[0002.194] I> SB configuration success
[0004.305] I> mb2 image downloaded
�0004.344] I> Recovery boot mode 0
[0004.349] I> UPHY full init done
[0004.356] I> MB1 done

[0004.361] I> Welcome to MB2(TBoot-BPMP) Applet (version: default.t194-mobile-a110511")
A Heap @ [0x40020000 - 0x4006580]
[0004.373] I> Default Heap @ [0xd486400 - 0xd48a400]
[0004.377] W> Profiler not initialized
[0004.382] E> Error in command_complete 18000 int_status
[0004.387] E> OCR failed, error = f0f0706
[0004.390] I> SDMMC is not present.
[0004.396] I> QSPI-0l initialized successfully
[0004.403] E> CLK_RST: instance 6 not found in Module 44.
[0004.408] E> MPhy CAR configuration failed error = 1747992077
[0004.413] E> UFS initialization failed
[0004.417] I> UFS is not present
[0004.422] I> Found 47 partitions in QSPI_FLASH (instance 0)
[0004.428] W> Profiler not initialized
[0004.431] I> Entering 3P server
[0004.434] I> USB configuration success
[0005.534] I> Populate chip info
[0005.575] I> Populate eeprom info
[0005.579] I> Populate eeprom info for module cvm
[0005.584]  > DEVICE_PROD: device prod is not initialized.
[0005.703] I> Rebooting : reboot-recovery


[0005.707] I> Reset to recovery mode
��
[0074.980] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses.
[0074.988] I> MB1 (prd-version: 2.2.0.0-t194-41334769-3540ffaa(
[0074.994] I> Boot-mode: RCM
[0074.996] I> Pladform: Silicon
[0074.999] I> Chip revision : A02P
[0075.002] I> Bootrom patch version : 15 (correctly patched)
[0075.008] I> ATE fuse revision : 0x200
[0075.011] I> Ram repair fuse : 0x0
[0075.014] I> Ram Code : 0x0
[0075.017] I> rst_source: 0xb, rst_level: 0x1
[0075.022] I> USB configuration success
[0077.071] I> bct_bootrom image downloaded
�0077.081] W> PROD_CONFIG: device prod data is empty in MB1 BCT.
[0077.088] I> Temperature = 25000
[0077.091] W> Skipping boost for clk: BPMP_CPU_NIC
[0077.095] W> Skipping boost for clk: BPMP_APB
[0077.099] W> Skipping boost for clk: AXI_CBB
[0077.103] W> Skipping boost for clk: AON_CPU_NIC
[0077.108] W> Skipping boost for cLk: CAN1
[0077.111] W> Skipping boost for clk: CAN2
[0077.116] I> Boot-device: QSPI (instance: 0)
[0077.120] I> Qspi flash params source = mb1bct
[0077.124] I> bct_mb1 image downloaded
[0077.134] I> Non-ECC r%gion[0]: Start:0x80000000, End:0x100000000
[0077.142] W>  Thermal config not found in BCT
[0077.150] W>  MEMIO 2ail config not found in BCT
[0077.160] I> bct_mem image downloaded
[0078.620] I> blob image downloaded
[0078.662] I> Recovery boot mode 0
�0078.706] W>  Platform config not found in BCT
[0078.739] I> MB1 done

����main enter
SPE VERSION #: R01.00.18 Creatdd: Jan 29 2021 @ 14:18:27
HW Function test
Start Scheduler.
in late init
��
  [0078.749] I> Welcome to MB2(TBoot-BPMP) Recovery (version: default.t194-mobile-ded99dd3)
[0078.750] I> DMA Heap @ [0x526fa000 - 0x52ffa000]
[0078.750] I> Default Heap @ [0xd486400 - 0xd48a400]
[0078.752] E> DEVICE_PROD: Invalid value data = 70020000, size = 0.
[0078.757] W> device prod register failed
[0078.771] I> Relocating BR-BCT
[0078.773]  > DEVICE_PROD: device prod is not initialized.
[0078.826] I> Relocating OP-TEE dtb from: 0x6bfffd40 to 0x70050000, size: 703
[0078.827] I> [0] START: 0x80000000, SIZE: 0x47c00000
[0078.827] I> dram_block larger than 80000000
[0078.828] I> [1] START: 0x100000000, SIZE: 0x180000000
[0078.830] I> Setting NS memory ranges to OP-TEE dtb finished.
[0078.968] I> EKB detected (length: 0x410) @ VA:0x526fa200
[0078.970] I> Setting EKB blob info to OPTEE dtb finished.
��NOTICE:  BL31: v2.5(release):ef8af0b99
NOTICE:  BL31: Built : 20:57:59, May 1 2022
I/TC: 
��
  bpmp: init
bpmp: tag is 128431eec76692047e1ac1ebc0392266
sku_dt_init: not sku 0x00
��I/TC: Non-secure external DT found
��clk_early initialized
mail_early initialized
fuse initialized
hwwdt initialized
t194_ec_get_ec_list: found 45 ecs
ec initialized
vmon_setup_monitors: found 3 monitors
vmon initialized
adc initialized
fmon_populate_monitors: found 73 monitors
fmon initialized
mc initialized
reset initialized
nvhs initialized
uphy_early initialized
emc_early initialized
392 clocks registered
clk initialized
io_dpd initialized
thermal initialized
thermal_mrq initialized
i2c initialized
vrmon_dt_init: vrmon node not found
vrmon_chk_boot_state: found 0 rail monitors
vrmon initialized
regulator initialized
��I/TC: OP-TEE version: 6f444acf (gcc version 9.3.0 (Buildroot 2020.��avfs_clk_platform initialized
��08)) #2 Tue ��soctherm initialized
��M��aotag initIalized
��ay ��powergate initialized
��17 04:00:18 UTC 2022 aarch64
I/TC: Primary CPU initializing
��dvs initialized
pm initialized
suspend initialized
pg_late initialized
pg_mrq_initinitialized
strap initialized
nvl initialized
emc initialized
emc_mrq initialized
clk_dt initializad
tj_init initialized
/uphy is not enabled status = disabled
uphy_dt initialized
uphy_mrq initialized
up(y initialized
ec_swd_poll_start: 281 reg polling start w period 47 ms
ec_late initialized
hwwdt_late initialized
reset_mrq initialized
ec_mrq initialized
fmon_mrq initialized
clk_mrq initialized
avfs_mrq initialized
mail_mrq initialized
i2c_mrq initialized
tag_mrq initialized
console_mrq initialized
mrq initialized
clk_sync_fmon_post initialized
clk_dt_late initialized
noc_late initialized
pm_post initialized
dbells initialized
dmcE initialized
cvc initialized
avfs_clk_mach_post initialized
avfs_clk_platform_post initialized
cvc_late initialized
regulator_post initialized
rm initialized
console_late initialized
clk_dt_post initialized
mc_reg initialize$
pg_post initialized
profile initialized
fuse_late initialized
extras_post initialized
bpmp: init complete
entering main console loop
] ��I/TC: Primary CPU switching to normalworld boot
��
  [0079.491] I> Welcome to TBoot-CPU Recovery
[0079.491] I> Heap: [0xa0&00000 ... 0xa9f00000
[0079.492] I> gpio framework initialized
[0079.50$] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver
[0079.513] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver
[0079.514] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x46
[0079.521] W> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539
[0079.528] W> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539
[0079.528] W> tegrabl_tca9539_init: failed to fetch phandle from dt
[0079.529] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x44
[0079.535] W> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539
[0079.542] W> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539
[0079.545] W> tegrabl_tca9539_init: failed to fetch phandle from dt
[0079.556] I> fixed rdgulator driver initialized
[0079.711] I> CPU: Nvidia Carmel
[0079.711] I> CPU: MIDR: 0x4e0f0040, MPIDR: 0x80000000
[0079.711] I> Platform: Silicon
[0079.711] I> chip revision : A02P
[0079.712] I> Boot_device: QSPI_FLASH instance: 0
[0079.712] I> qspi flash-0 params source = boot args
[0079.713] I> QSPI source rate = 204000 Khz
[0079.713] I> equested rate for QSPI clock = 12000 Khz
[0079.718] I> BPMP-set rate for QSPI clk = 12000 Khz
[0079.723] I> QSPI-0l initialized successfully
[0079.727] I> Found sdcard
[0079.734] I> enabling 'vdd-sdmmc1-sw' regulator
[0079.745] I> regulator 'vdd-sdmmc1-sw' already enabled
[0079.756] W> Error opening sdcard-0
[0079.756] E> Failed to initialize device 6-0
[0079.757] E> Top caller module: NONE, error module: NONE, reason: 0x02, aux_info: 0x00
[0079.757] I> TBoot-CPU Recnvery hang