=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2021.01.12 11:24:57 =~=~=~=~=~=~=~=~=~=~=~= ÿâ00.0] RTHE: 1 binaryratcht v 4 stoolg tanrtht levefom HW us. [0033] I> B1 (prdvesin 151.3-t14433476-2a2c57) [000.038] > Boot-oe: Codboot [000.041] I> Chip revision : A02P [00.049] IE fuse revision : 0x200 [0000.053] I> Ra repair fuse 0x0 [0000.056] I> Ram Code : 0x0 [0000.058] I> rst_source : 0x0 [0000.061] I> rslevel : 0x0 [0000.065] I> Boot-device: QSPI [0000.067] I> Qspi fla]I Qspising p-dma [0000.074] I> Qspi clock source : pllp [0000.078 I> QSPI Flash Size= 32 MB [0000.081] I> Qspi initialized suessfully [0000.5] W> No valid slot number is found in scratch register [0000.091] W> Returive Boot hain : 0 [0000.097] I> Boot-ice: QSPI [0000.100] I> Qspi flash paramsurce = brbct [0000.106] W> MB1_PLATFORM_CONFIG: device prod data is empy in MB1 BCT. [13] I> Temperatur boost clk: MP_CPU_NIC [0000.121] W> Skipping boost for clk: BPMP_APB [0000125] W> Skippiboost for clk: AXI_CBB [0000.129] W> Skipping bst for clk: AON_CPU_NIC [0000.133] W> Skipping boost for clk: CAN1 [0000.137] W> Skipp0.141] I> Boovice:SPI [0000.144] I> Boot-devie: QSPI [0000.147] I> Qspi flash params source = mb1bct [0.151] I> Qspi using bpmp-dma [0000.154] I> Qspi clock source : pllc_out0 [0000.158] I>pi einitialized [0000.160] I>ce = mb1bct [0000.166] I> ECC region[0]: Start:0x0, End:0x0 [0000.170] I> ECC region[1]: Start:0x0, End:0x0 [0000.] CC region[2]: Start:0x0, End:0x0 [0007I> ECCion[3]: Start:0x0, End:0x0 [0000.1 I> End:0x0 [0000.18 I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0.192] I> Non-ECC regio]: Start:0x0, End:0x0 [0000.7] I> on-ECC region[2]: Start:0x0, End:0x0 [0000.201] I> Non-ECC region[3]: Start:0x0, End:0x0 gion[4]tart:0x0, End:0x0 0.211] E>: Therml cnfig [00.218] E> FAILED: MEMIO rail config 3Qspi flash pams source = mb1bct [00.241I> Qspi flash params source = mb1bct [000.1> Qspi flash params source = mb1bct [8] I Qspiflasparams sour = mb1bct 5] I> Qspi flash paramssource = mb1bct [0.367 I> ÿýÿàmai enter SPe to MB2(TBoot-BP) (version: 00.00.2018.3le-389501e9) 0000.36] I> DMA Heap @ [0x6fa000 - 0x52a000]000.376] I> Defaul Heap @ [0xd4864 - 0xd48a400] [0000.377] E> DEVICE_PROD: Invalid value data = 70020000, sizPI [0000.389] I> Boot_device: QSPI_FLASH instance: 0 [0000.395] I> QSPI Flash Size = 32 MB [0000.400] I> Qspi initialized successfully [0000.401] I> qspi flash-0 params source = boot args [0000.783] I> sdmmc DDR50 mode [0000.785] I> sdmmc-3 params source = safe params [0000.790] I> Found 47 partitions in QSPI_FLASH (instance 0) [0000.793] W> Cannot find any partition table for 00000003 [0000.797] I> Found 11 partitions in SDMMC_USER (instance 3) [0000.798] W> No valid slot number is found in scratch register [0000.798] W> Return default slot: _a [0000.799] I> Active Boot chain : 0 [0000.800] I> parsing oem signed section of bpmp-fw header done [0000.801] I> bpmp-fw binary init read from storage [0000.805] I> oem authentication of bpmp-fw header done [0000.819] I> bpmp-fw binary done read from storage [0000.819] I> bpmp-fw: Authentication init Done [0000.820] I> parsing oem signed section of cpubl header done [0000.824] I> cpubl binary init read from storage [0000.828] I> bpmp-fw: Authentication Finalize Done [0000.833] I> oem authentication of cpubl header done [0000.840] I> cpubl binary done read from storage [0000.842] I> cpubl: Authentication init Done [0000.847] I> parsing oem signed section of rce header done [0000.852] I> rce binary init read from storage [0000.856] I> Relocating BR-BCT [0000.859] I> cpubl: Authentication Finalize Done [0000.863] I> oem authentication of rce header done [0000.868] I> rce binary done read from storage [0000.872] I> rce: Authentication init Done [0000.877] I> parsing oem signed section of ape header done [0000.882] I> ape binary init read from storage [0000.886] I> rce: Authentication Finalize Done [0000.890] I> oem authentication of ape header done [0000.895] I> ape binary done read from storage [0000.899] I> ape: Authentication init Done [0000.903] I> parsing oem signed section of tos header done [0000.908] I> tos binary init read from storage [0000.912] I> ape: Authentication Finalize Done [0000.917] I> oem authentication of tos header done [0000.923] I> tos binary done read from storage [0000.926] I> tos: Authentication init Done [0000.930] I> parsing oem signed section of bpmp-fw-dtb header done [0000.936] I> bpmp-fw-dtb binary init read from storage [0000.941] I> tos: Authentication Finalize Done [0000.947] I> oem authentication of bpmp-fw-dtb header done [0000.950] I> bpmp-fw-dtb binary done read from storage [0000.955] I> bpmp-fw-dtb: Authentication init Done [0000.960] I> parsing oem signed section of cpubl-dtb header done [0000.966] I> cpubl-dtb binary init read from storage [0000.971] I> bpmp-fw-dtb: Authentication Finalize Done [0001.028] I> oem authentication of cpubl-dtb header done [0001.029] I> cpubl-dtb binary done read from storage [0001.029] I> cpubl-dtb: Authentication init Done [0001.030] I> parsing oem signed section of eks header done [0001.031] I> eks binary init read from storage [0001.031] I> cpubl-dtb: Authentication Finalize Done [0001.032] I> oem authentication of eks header done [0001.037] I> eks binary done read from storage [0001.041] I> eks: Authentication init Done [0001.045] I> eks: Authentication Finalize Done [0001.049] I> EKB detected (length: 0x410) @ VA:0x52714400 ÿäNOTICE: BL31: v1.3(release):de895fd9e NOTICE: BL31: Built : 12:15:31, Oct 16 2020 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! hwkey-agent: 40: hwkey-agent is running!! hwkey-agent: 182: key_mgnt_processing ....... hwkey-agent: 157: Init hweky-agent services!! platform_bootstrap_epilog: trusty bootstrap complete ÿâ welcome to lk calling constructors initializing heap creating bootstrap completion thread top of bootstrap2() initializing platform bpmp: platform_init tag is 57f8a77779f848bf2ecf21dabee5645f tag_show initialized dt initialized mail initialized chipid initialized fuse initialized sku initialized speedo initialized ec_get_ec_list: found 45 ecs ec initialized ec_mrq initialized vmon_populate_monitors: found 3 monitors vmon initialized adc initialized fmon_populate_monitors: found 73 monitors fmon initialized fmon_mrq initialized reset initialized nvhs initialized 391 clocks registered clk_mrq_init: mrq handler registered clk initialized nvlink initialized io_dpd initialized io_dpd initialized thermal initialized i2c5 controller initialized initialized i2c mrq handling i2c initialized regulator initialized avfs_clk_platform_init: bad clk id in clock@cluster1_avfs avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized pg_late initialized strap initialized tag initialized emc initialized clk_dt initialized avfs_ccplex_platform initialized tj_max: dt node not found tj_init initialized uphy_mrq_init: mrq handler registered uphy_dt initialized uphy initialized safereg_init: period 80 ms ec_late initialized mrq initialized ÿá [0001.391] I> Welcome to Cboot ÿâWARNING: no registered clock for FMON_NAFLL_CLUSTER1 (id 281) fmon_post initialized ÿá[0001.391] I> Cboot Version: t194-7475cd83 [0001.393] I> CPU-BL Params @ 0xf2820000 [0001.397] I> 0) Base:0x00000000 Size:0x00000000 [0001.401] I> 1) Base:0xf1100000 Size:0x00100000 [0001.406] I> 2) Base:0xf2000000 Size:0x00200000 [0001.410] I> 3) Base:0xf1200000 Size:0x00200000 [0001.415] I> 4) Base:0xf1000000 Size:0x00100000 ÿâclk_set_parent failed for clk can1, parent pll_aon (-22) clk_set_parent failed for clk can2, parent pll_aon (-22) clk_set_parent failed for clk dmic5, parent pll_aon (-22) clk_set_parent failed for clk i2c2, parent pll_aon (-22) clk_set_parent failed for clk i2c8, parent pll_aon (-22) clk_set_parent failed for clk spi2, parent pll_aon (-22) clk_set_parent failed for clk pwm4, parent pll_aon (-22) clk_dt_late initialized machine_check initialized pm_post initialized dbells initialized avfs_clk_platform_post initialized dmce initialized cvc initialized ccplex_avfs_hw_init: nafll_cluster0: not monitored ccplex_avfs_hw_init: nafll_cluster2: not monitored ccplex_avfs_hw_init: nafll_cluster3: not monitored avfs_clk_mach_post initialized regulator_post initialized rm initialized sc7_diag initialized thermal_test initialized serial_late initialized clk_post initialized clk_dt_post initialized mc_reg initialized pg_post initialized dyn_modules initialized sku_debugfs initialized speedo_debugfs initialized adc_debugfs initialized Failed to register PTO counter for id 281 Failed to register PTO counter for id 281 Failed to register PTO counter for id 281 Failed to register PTO counter for id 281 clk_debugfs initialized emc_debugfs initialized dvs_debugfs initialized fmon_debugfs_init_one: no clock debugfs node to attach FMON_NAFLL_CLUSTER1 fmon_debugfs initialized vmon_debugfs initialized pg_debugfs initialized profile_fs initialized debugfs_cons initialized mail_fs initialized profile initialized cvc_debugfs initialized dmce_debugfs initialized ec_debugfs initialized rm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed rm_debugfs initialized soctherm_debug initialized gr_reader initialized mods initialized dt_fs initialized debugfs_mrq initialized debug_mrq initialized debug_safereg initialized initializing target calling apps_init() starting app shell entering main console loop ] ÿá[0001.419] I> 5) Base:0xf0f00000 Size:0x00100000 [0001.599] I> 6) Base:0xf3800000 Size:0x00400000 [0001.603] I> 7) Base:0xf1c00000 Size:0x00400000 [0001.608] I> 8) Base:0xf0e00000 Size:0x00100000 [0001.612] I> 9) Base:0xf0d00000 Size:0x00100000 [0001.617] I> 10) Base:0xf3000000 Size:0x00800000 [0001.621] I> 11) Base:0x40000000 Size:0x00040000 [0001.626] I> 12) Base:0xf0c00000 Size:0x00100000 [0001.630] I> 13) Base:0x40046000 Size:0x00002000 [0001.634] I> 14) Base:0x40048000 Size:0x00002000 [0001.639] I> 15) Base:0xac000000 Size:0x00004000 [0001.643] I> 16) Base:0x4004a000 Size:0x00002000 [0001.648] I> 17) Base:0xf0b00000 Size:0x00100000 [0001.652] I> 18) Base:0x4004c000 Size:0x00002000 [0001.657] I> 19) Base:0xf2200000 Size:0x00600000 [0001.661] I> 20) Base:0x4004e000 Size:0x00002000 [0001.666] I> 21) Base:0xf09d0000 Size:0x0000c000 [0001.670] I> 22) Base:0x00000000 Size:0x00000000 [0001.675] I> 23) Base:0xf09e0000 Size:0x00020000 [0001.679] I> 24) Base:0xf6000000 Size:0x02000000 [0001.684] I> 25) Base:0x40050000 Size:0x00002000 [0001.688] I> 26) Base:0x40040000 Size:0x00006000 [0001.692] I> 27) Base:0xf1800000 Size:0x00400000 [0001.697] I> 28) Base:0xf4c00000 Size:0x01400000 [0001.701] I> 29) Base:0xf1400000 Size:0x00400000 [0001.706] I> 30) Base:0xf0a00000 Size:0x00100000 [0001.710] I> 31) Base:0x00000000 Size:0x00000000 [0001.715] I> 32) Base:0xf8000000 Size:0x08000000 [0001.719] I> 33) Base:0x00000000 Size:0x00000000 [0001.724] I> 34) Base:0xf3c00000 Size:0x01000000 [0001.728] I> 35) Base:0xab000000 Size:0x01000000 [0001.733] I> 36) Base:0xa0000000 Size:0x0b000000 [0001.737] I> 37) Base:0xf2800000 Size:0x00800000 [0001.742] I> 38) Base:0x80000000 Size:0x20000000 [0001.746] I> 39) Base:0xb0000000 Size:0x08000000 [0001.750] I> 40) Base:0x00000000 Size:0x00000000 [0001.755] I> 41) Base:0x00000000 Size:0x00000000 [0001.759] I> 42) Base:0x00000000 Size:0x00000000 [0001.764] I> 43) Base:0x00000000 Size:0x00000000 [0001.768] I> 44) Base:0x00000000 Size:0x00000000 [0001.773] I> 45) Base:0x00000000 Size:0x00000000 [0001.777] GIC-SPI Target CPU: 0 [0001.780] Interrupts Init done [0001.783] [MANNY]platform_early_init...done [0001.787] [MANNY]target_early_init... [0001.791] [MANNY]target_early_init...done [0001.794] [MANNY]call_constructors... [0001.798] calling constructors [0001.801] [MANNY]call_constructors...done [0001.805] [MANNY]tegrabl_printf... [0001.808] initializing heap [0001.811] [MANNY]tegrabl_printf...done [0001.814] [MANNY]platform_init_heap... [0001.818] I> Heap: [0xa0692568 ... 0xab000000] [0001.822] [MANNY]platform_init_heap...done [0001.826] [MANNY]kernel_init... [0001.829] initializing threads [0001.832] initializing timers [0001.835] [MANNY]kernel_init...done [0001.838] [MANNY]thread_create... [0001.841] creating bootstrap completion thread [0001.845] [MANNY]autorecovery_init... [0001.849] [MANNY]tegrabl_gpio_driver_get... [0001.853] [0001.854] ----------------------------------------------- [0001.859] Synchronous Exception: DATA ABORT (FAR: ffffffffffffffec) [0001.865] ----------------------------------------------- [0001.871] PAR_ELX: 0x809 [0001.873] [0001.874] ESR 0x96000004: ec 0x25, il 0x1, iss 0x4 [0001.879] ----------------------------------------------- [0001.884] [Stack Trace] [0001.886] [0001.888] => pc:0xA0622218, sp:0xA068CD80 [0001.891] => pc:0xA060F358, sp:0xA068CFB0 [0001.895] => pc:0xA060018C, sp:0xA068CFC0 [0001.899] ----------------------------------------------- [0001.904] iframe 0xa068cc90: [0001.907] x0 0x 0 x1 0x a068cff8 x2 0xffffffffffffffe8 x3 0x a068dc88 [0001.916] x4 0x 0 x5 0x a068cdc0 x6 0x 20 x7 0x 8 [0001.925] x8 0x 0 x9 0x a x10 0x aafff60f x11 0x a0600010 [0001.934] x12 0x 0 x13 0x 0 x14 0x 0 x15 0x 3c0 [0001.943] x16 0x 0 x17 0x 0 x18 0x a600000 x19 0x a066a688 [0001.953] x20 0x 0 x21 0x 0 x22 0x a0600190 x23 0x 0 [0001.962] x24 0x 0 x25 0x 0 x26 0x 0 x27 0x 0 [0001.971] x28 0x 0 x29 0x a068cfb0 lr 0x a060f35c sp 0x a068cd80 [0001.980] elr 0x a0622218 [0001.983] spsr 0x 200002c9 [0001.986] ----------------------------------------------- [0001.991] panic (caller 0xa0601238): die [0001.995] HALT: spinning forever... ÎÎÎþþþþÎÎÎþÎÌÌŒŒŒŒ€ÌŒŒŒŒŒ€€€€€Œ€€€‚€€€€€ŒŽŒ€€€€ÿâ [0006.752] W> RATCHET: MB1 binary ratchet value 4 is too large than ratchet level 2 from HW fuses. [0006.760] I> MB1 (prd-version: 1.5.1.3-t194-41334769-d2a21c57) [0006.765] I> Boot-mode: Platform RCM [0006.769] I> Chip revision : A02P [0006.772] I> Bootrom patch version : 15 (correctly patched) [0006.777] I> ATE fuse revision : 0x200 [0006.780] I> Ram repair fuse : 0x0 [0006.784] I> Ram Code : 0x0 [0006.786] I> rst_source : 0x0 [0006.789] I> rst_level : 0x0 [0006.793] I> USB configuration success [0008.788] I> mb2 image downloaded [0008.797] I> Recovery boot mode 0 [0008.800] I> Boot-device: QSPI [0008.805] I> UPHY full init done [0008.809] I> MB1 done [0008.814] W> Profiler not initialized [0008.817] I> Welcome to MB2(TBoot-BPMP) Applet (version: 00.00.2018.32-mobile-2b565ce1) [0008.825] W> Profiler not initialized [0008.829] I> DMA Heap @ [0x40020000 - 0x40065800] [0008.833] I> Default Heap @ [0xd486400 - 0xd48a400] [0008.838] W> Profiler not initialized [0008.842] W> Profiler not initialized [0008.845] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0008.851] W> device prod register failed [0008.854] W> Profiler not initialized [0008.934] I> sdmmc DDR50 mode [0008.939] I> QSPI Flash Size = 32 MB [0008.950] I> Qspi initialized successfully [0009.001] E> Link startup dme_set failed [0009.005] E> UFS initialization failed [0009.009] I> UFS is not present [0009.012] W> Profiler not initialized [0009.018] W> Cannot find any partition table for 00000003 [0009.026] I> Found 11 partitions in SDMMC_USER (instance 3) [0009.034] I> Found 47 partitions in QSPI_FLASH (instance 0) [0009.039] W> Profiler not initialized [0009.043] W> Profiler not initialized [0009.046] W> Profiler not initialized [0009.050] I> Entering 3p server [0009.053] I> USB configuration success [0009.827] I> Populate eeprom info [0009.831] I> Populate eeprom info for module cvm [0009.872] I> Rebooting : reboot-recovery [00ÿâ [0005.140] W> RATCHET: MB1 binary ratchet value 4 is too large than ratchet level 2 from HW fuses. [0005.149] I> MB1 (prd-version: 1.5.1.3-t194-41334769-d2a21c57) [0005.154] I> Boot-mode: RCM [0005.157] I> Chip revision : A02P [0005.160] I> Bootrom patch version : 15 (correctly patched) [0005.165] I> ATE fuse revision : 0x200 [0005.168] I> Ram repair fuse : 0x0 [0005.171] I> Ram Code : 0x0 [0005.174] I> rst_source : 0xb [0005.177] I> rst_level : 0x1 [0005.180] I> USB configuration success [0009.380] I> bct_bootrom image downloaded [0009.389] W> MB1_PLATFORM_CONFIG: device prod data is empty in MB1 BCT. [0009.396] I> Temperature = 35500 [0009.399] W> Skipping boost for clk: BPMP_CPU_NIC [0009.404] W> Skipping boost for clk: BPMP_APB [0009.408] W> Skipping boost for clk: AXI_CBB [0009.412] W> Skipping boost for clk: AON_CPU_NIC [0009.416] W> Skipping boost for clk: CAN1 [0009.420] W> Skipping boost for clk: CAN2 [0009.424] I> Boot-device: QSPI [0009.427] I> Boot-device: QSPI [0009.430] I> Qspi flash params source = mb1bct [0009.434] I> bct_mb1 image downloaded [0009.444] I> ECC region[0]: Start:0x0, End:0x0 [0009.448] I> ECC region[1]: Start:0x0, End:0x0 [0009.452] I> ECC region[2]: Start:0x0, End:0x0 [0009.456] I> ECC region[3]: Start:0x0, End:0x0 [0009.460] I> ECC region[4]: Start:0x0, End:0x0 [0009.464] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0009.470] I> Non-ECC region[1]: Start:0x0, End:0x0 [0009.474] I> Non-ECC region[2]: Start:0x0, End:0x0 [0009.479] I> Non-ECC region[3]: Start:0x0, End:0x0 [0009.483] I> Non-ECC region[4]: Start:0x0, End:0x0 [0009.490] E> FAILED: Thermal config [0009.497] E> FAILED: MEMIO rail config [0009.507] I> bct_mem image downloaded [0010.587] I> blob image downloaded [0010.597] I> Recovery boot mode 0 [0010.664] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.14 Created: Sep 19 2018 @ 11:03:21 HW Function test Start Scheduler. in late init ÿâ [0010.673] I> Welcome to MB2(TBoot-BPMP) Recovery (version: 00.00.2018.32-mobile-269daa9d) [0010.674] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0010.675] I> Default Heap @ [0xd486400 - 0xd48a400] [0010.676] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0010.682] W> device prod register failed [0010.686] I> parsing oem signed section of bpmp-fw header done [0010.694] I> bpmp-fw binary copied from blob [0010.696] I> oem authentication of bpmp-fw header done [0010.701] I> bpmp-fw: Authentication init Done [0010.705] I> parsing oem signed section of cpubl header done [0010.711] I> cpubl binary copied from blob [0010.714] I> bpmp-fw: Authentication Finalize Done [0010.719] I> oem authentication of cpubl header done [0010.724] I> cpubl: Authentication init Done [0010.728] I> parsing oem signed section of tos header done [0010.734] I> tos binary copied from blob [0010.737] I> Relocating BR-BCT [0010.740] I> cpubl: Authentication Finalize Done [0010.745] I> oem authentication of tos header done [0010.749] I> tos: Authentication init Done [0010.753] I> parsing oem signed section of bpmp-fw-dtb header done [0010.760] I> bpmp-fw-dtb binary copied from blob [0010.763] I> tos: Authentication Finalize Done [0010.769] I> oem authentication of bpmp-fw-dtb header done [0010.773] I> bpmp-fw-dtb: Authentication init Done [0010.778] I> parsing oem signed section of cpubl-dtb header done [0010.784] I> cpubl-dtb binary copied from blob [0010.788] I> bpmp-fw-dtb: Authentication Finalize Done [0010.876] I> oem authentication of cpubl-dtb header done [0010.877] I> cpubl-dtb: Authentication init Done [0010.878] I> parsing oem signed section of eks header done [0010.878] I> eks binary copied from blob [0010.879] I> cpubl-dtb: Authentication Finalize Done [0010.879] I> oem authentication of eks header done [0010.880] I> eks: Authentication init Done [0010.884] I> eks: Authentication Finalize Done [0010.888] I> EKB detected (length: 0x410) @ VA:0x526fb600 ÿäNOTICE: BL31: v1.3(release):de895fd9e NOTICE: BL31: Built : 12:15:31, Oct 16 2020 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! hwkey-agent: 40: hwkey-agent is running!! hwkey-agent: 182: key_mgnt_processing ....... hwkey-agent: 157: Init hweky-agent services!! platform_bootstrap_epilog: trusty bootstrap complete ÿâ welcome to lk calling constructors initializing heap creating bootstrap completion thread top of bootstrap2() initializing platform bpmp: platform_init tag is 57f8a77779f848bf2ecf21dabee5645f tag_show initialized dt initialized mail initialized chipid initialized fuse initialized sku initialized speedo initialized ec_get_ec_list: found 45 ecs ec initialized ec_mrq initialized vmon_populate_monitors: found 3 monitors vmon initialized adc initialized fmon_populate_monitors: found 73 monitors fmon initialized fmon_mrq initialized reset initialized nvhs initialized 391 clocks registered clk_mrq_init: mrq handler registered clk initialized nvlink initialized io_dpd initialized io_dpd initialized thermal initialized i2c5 controller initialized initialized i2c mrq handling i2c initialized regulator initialized avfs_clk_platform_init: bad clk id in clock@cluster1_avfs avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized pg_late initialized strap initialized tag initialized emc initialized clk_dt initialized avfs_ccplex_platform initialized tj_max: dt node not found tj_init initialized /uphy is not enabled status = disabled uphy_dt initialized uphy initialized safereg_init: period 80 ms ec_late initialized mrq initialized ÿá [0011.224] I> Welcome to TBoot-CPU Recovery ÿâWARNING: no registered clock for FMON_NAFLL_CLUSTER1 (id 281) fmon_post initialized ÿá[0011.224] I> Heap: [0xa4000000 ... 0xaa000000 ÿâclk_set_parent failed for clk can1, parent pll_aon (-22) clk_set_parent failed for clk can2, parent pll_aon (-22) clk_set_parent failed for clk dmic5, parent pll_aon (-22) clk_set_parent failed for clk i2c2, parent pll_aon (-22) clk_set_parent failed for clk i2c8, parent pll_aon (-22) clk_set_parent failed for clk spi2, parent pll_aon (-22) clk_set_parent failed for clk pwm4, parent pll_aon (-22) clk_dt_late initialized machine_check initialized pm_post initialized dbells initialized avfs_clk_platform_post initialized dmce initialized cvc initialized ccplex_avfs_hw_init: nafll_cluster0: not monitored ccplex_avfs_hw_init: nafll_cluster2: not monitored ccplex_avfs_hw_init: nafll_cluster3: not monitored avfs_clk_mach_post initialized regulator_post initialized rm initialized sc7_diag initialized thermal_test initialized serial_late initialized clk_post initialized clk_dt_post initialized mc_reg initialized pg_post initialized dyn_modules initialized sku_debugfs initialized speedo_debugfs initialized adc_debugfs initialized Failed to register PTO counter for id 281 Failed to register PTO counter for id 281 Failed to register PTO counter for id 281 Failed to register PTO counter for id 281 clk_debugfs initialized emc_debugfs initialized dvs_debugfs initialized fmon_debugfs_init_one: no clock debugfs node to attach FMON_NAFLL_CLUSTER1 fmon_debugfs initialized vmon_debugfs initialized pg_debugfs initialized profile_fs initialized debugfs_cons initialized mail_fs initialized profile initialized cvc_debugfs initialized dmce_debugfs initialized ec_debugfs initialized rm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed rm_debugfs initialized soctherm_debug initialized gr_reader initialized mods initialized dt_fs initialized debugfs_mrq initialized debug_mrq initialized debug_safereg initialized initializing target calling apps_init() starting app shell entering main console loop ] ÿá[0011.235] I> gpio framework initialized [0011.420] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0011.424] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0011.429] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x46 [0011.439] E> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0011.445] E> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0011.450] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0011.456] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x44 [0011.465] E> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0011.473] E> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0011.478] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0011.487] I> fixed regulator driver initialized [0011.504] I> CPU: Nvidia Carmel [0011.505] I> CPU: MIDR: 0x4e0f0040, MPIDR: 0x80000000 [0011.505] I> chip revision : A02P [0011.505] I> Boot-device: QSPI [0011.506] I> Boot_device: QSPI_FLASH instance: 0 [0011.508] I> QSPI source rate = 204000 Khz [0011.511] I> Requested rate for QSPI clock = 34000 Khz [0011.516] I> BPMP-set rate for QSPI clk = 34000 Khz [0011.521] I> QSPI Flash Size = 32 MB [0011.529] I> Qspi initialized successfully [0011.529] I> qspi flash-0 params source = boot args [0011.952] I> sdmmc DDR50 mode [0011.962] I> sdmmc-3 params source = safe params [0011.964] I> Found 47 partitions in QSPI_FLASH (instance 0) [0011.981] W> Cannot find any partition table for 00000003 [0011.993] I> Found 11 partitions in SDMMC_USER (instance 3) [0011.994] I> Recovery boot_type: 0 [0011.994] I> Entering 3p server [0011.994] I> USB configuration success [0012.008] I> Erasing cpu-bootloader partition [0012.009] I> QSPI: erasing sectors from 184 - 205 [0024.072] I> Writing cpu-bootloader partition. [0026.498] I> Rebooting : reset-coldboot ÿäÿâShutdown state requested 1 Rebooting system ... ÿâ [0000.024] W> RATCHET: MB1 binary ratchet value 4 is too large than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 1.5.1.3-t194-41334769-d2a21c57) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Chip revision : A02P [0000.044] I> Bootrom patch version : 15 (correctly patched) [0000.049] I> ATE fuse revision : 0x200 [0000.053] I> Ram repair fuse : 0x0 [0000.056] I> Ram Code : 0x0 [0000.058] I> rst_source : 0xb [0000.061] I> rst_level : 0x1 [0000.065] I> Boot-device: QSPI [0000.067] I> Qspi flash params source = brbct [0000.071] I> Qspi using bpmp-dma [0000.074] I> Qspi clock source : pllp [0000.078] I> QSPI Flash Size = 32 MB [0000.081] I> Qspi initialized successfully [0000.085] W> No valid slot number is found in scratch register [0000.091] W> Return default slot: _a [0000.094] I> Active Boot chain : 0 [0000.097] I> Boot-device: QSPI [0000.100] I> Qspi flash params source = brbct [0000.106] W> MB1_PLATFORM_CONFIG: device prod data is empty in MB1 BCT. [0000.112] I> Temperature = 39000 [0000.115] W> Skipping boost for clk: BPMP_CPU_NIC [0000.119] W> Skipping boost for clk: BPMP_APB [0000.123] W> Skipping boost for clk: AXI_CBB [0000.127] W> Skipping boost for clk: AON_CPU_NIC [0000.132] W> Skipping boost for clk: CAN1 [0000.135] W> Skipping boost for clk: CAN2 [0000.140] I> Boot-device: QSPI [0000.142] I> Boot-device: QSPI [0000.145] I> Qspi flash params source = mb1bct [0000.149] I> Qspi using bpmp-dma [0000.152] I> Qspi clock source : pllc_out0 [0000.156] I> Qspi reinitialized [0000.159] I> Qspi flash params source = mb1bct [0000.164] I> ECC region[0]: Start:0x0, End:0x0 [0000.169] I> ECC region[1]: Start:0x0, End:0x0 [0000.173] I> ECC region[2]: Start:0x0, End:0x0 [0000.177] I> ECC region[3]: Start:0x0, End:0x0 [0000.181] I> ECC region[4]: Start:0x0, End:0x0 [0000.185] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.191] I> Non-ECC region[1]: Start:0x0, End:0x0 [0000.195] I> Non-ECC region[2]: Start:0x0, End:0x0 [0000.200] I> Non-ECC region[3]: Start:0x0, End:0x0 [0000.204] I> Non-ECC region[4]: Start:0x0, End:0x0 [0000.210] E> FAILED: Thermal config [0000.217] E> FAILED: MEMIO rail config [0000.227] I> Boot-device: QSPI [0000.230] I> Qspi flash params source = mb1bct [0000.239] I> Qspi flash params source = mb1bct [0000.251] I> Qspi flash params source = mb1bct [0000.317] I> Qspi flash params source = mb1bct [0000.326] I> Qspi flash params source = mb1bct [0000.353] I> Qspi flash params source = mb1bct [0000.365] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.14 Created: Sep 19 2018 @ 11:03:21 HW Function test Start Scheduler. in late init ÿâ [0000.374] I> Welcome to MB2(TBoot-BPMP) (version: 00.00.2018.32-mobile-389501e9) [0000.374] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.375] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.375] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.381] W> device prod register failed [0000.385] I> Boot-device: QSPI [0000.388] I> Boot_device: QSPI_FLASH instance: 0 [0000.393] I> QSPI Flash Size = 32 MB [0000.399] I> Qspi initialized successfully [0000.400] I> qspi flash-0 params source = boot args [0000.726] I> sdmmc DDR50 mode [0000.728] I> sdmmc-3 params source = safe params [0000.733] I> Found 47 partitions in QSPI_FLASH (instance 0) [0000.734] W> Cannot find any partition table for 00000003 [0000.739] I> Found 11 partitions in SDMMC_USER (instance 3) [0000.740] W> No valid slot number is found in scratch register [0000.740] W> Return default slot: _a [0000.741] I> Active Boot chain : 0 [0000.741] I> parsing oem signed section of bpmp-fw header done [0000.742] I> bpmp-fw binary init read from storage [0000.747] I> oem authentication of bpmp-fw header done [0000.761] I> bpmp-fw binary done read from storage [0000.762] I> bpmp-fw: Authentication init Done [0000.763] I> parsing oem signed section of cpubl header done [0000.766] I> cpubl binary init read from storage [0000.771] I> bpmp-fw: Authentication Finalize Done [0000.775] I> oem authentication of cpubl header done [0000.782] I> cpubl binary done read from storage [0000.785] I> cpubl: Authentication init Done [0000.789] I> parsing oem signed section of rce header done [0000.794] I> rce binary init read from storage [0000.799] I> Relocating BR-BCT [0000.801] I> cpubl: Authentication Finalize Done [0000.806] I> oem authentication of rce header done [0000.811] I> rce binary done read from storage [0000.815] I> rce: Authentication init Done [0000.819] I> parsing oem signed section of ape header done [0000.824] I> ape binary init read from storage [0000.828] I> rce: Authentication Finalize Done [0000.833] I> oem authentication of ape header done [0000.837] I> ape binary done read from storage [0000.841] I> ape: Authentication init Done [0000.846] I> parsing oem signed section of tos header done [0000.851] I> tos binary init read from storage [0000.855] I> ape: Authentication Finalize Done [0000.860] I> oem authentication of tos header done [0000.866] I> tos binary done read from storage [0000.868] I> tos: Authentication init Done [0000.872] I> parsing oem signed section of bpmp-fw-dtb header done [0000.878] I> bpmp-fw-dtb binary init read from storage [0000.883] I> tos: Authentication Finalize Done [0000.889] I> oem authentication of bpmp-fw-dtb header done [0000.893] I> bpmp-fw-dtb binary done read from storage [0000.898] I> bpmp-fw-dtb: Authentication init Done [0000.903] I> parsing oem signed section of cpubl-dtb header done [0000.908] I> cpubl-dtb binary init read from storage [0000.913] I> bpmp-fw-dtb: Authentication Finalize Done [0000.971] I> oem authentication of cpubl-dtb header done [0000.972] I> cpubl-dtb binary done read from storage [0000.972] I> cpubl-dtb: Authentication init Done [0000.973] I> parsing oem signed section of eks header done [0000.974] I> eks binary init read from storage [0000.975] I> cpubl-dtb: Authentication Finalize Done [0000.975] I> oem authentication of eks header done [0000.980] I> eks binary done read from storage [0000.984] I> eks: Authentication init Done [0000.988] I> eks: Authentication Finalize Done [0000.992] I> EKB detected (length: 0x410) @ VA:0x52714400 ÿäNOTICE: BL31: v1.3(release):de895fd9e NOTICE: BL31: Built : 12:15:31, Oct 16 2020 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! hwkey-agent: 40: hwkey-agent is running!! hwkey-agent: 182: key_mgnt_processing ....... hwkey-agent: 157: Init hweky-agent services!! platform_bootstrap_epilog: trusty bootstrap complete ÿâ welcome to lk calling constructors initializing heap creating bootstrap completion thread top of bootstrap2() initializing platform bpmp: platform_init tag is 57f8a77779f848bf2ecf21dabee5645f tag_show initialized dt initialized mail initialized chipid initialized fuse initialized sku initialized speedo initialized ec_get_ec_list: found 45 ecs ec initialized ec_mrq initialized vmon_populate_monitors: found 3 monitors vmon initialized adc initialized fmon_populate_monitors: found 73 monitors fmon initialized fmon_mrq initialized reset initialized nvhs initialized 391 clocks registered clk_mrq_init: mrq handler registered clk initialized nvlink initialized io_dpd initialized io_dpd initialized thermal initialized i2c5 controller initialized initialized i2c mrq handling i2c initialized regulator initialized avfs_clk_platform_init: bad clk id in clock@cluster1_avfs avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized pg_late initialized strap initialized tag initialized emc initialized clk_dt initialized avfs_ccplex_platform initialized tj_max: dt node not found tj_init initialized uphy_mrq_init: mrq handler registered uphy_dt initialized uphy initialized safereg_init: period 80 ms ec_late initialized ÿá [0001.334] I> Welcome to Cboot [0001.334] I> Cboot Version: t194-3ec4cbfdÿâmrq initialized WARNING: no registered clock for FMON_NAFLL_CLUSTER1 (id 281) fmon_post initialized ÿá [0001.336] I> CPU-BL Params @ 0xf2820000 [0001.340] I> 0) Base:0x00000000 Size:0x00000000 [0001.344] I> 1) Base:0xf1100000 Size:0x00100000 ÿâclk_set_parent failed for clk can1, parent pll_aon (-22) clk_set_parent failed for clk can2, parent pll_aon (-22) clk_set_parent failed for clk dmic5, parent pll_aon (-22) clk_set_parent failed for clk i2c2, parent pll_aon (-22) clk_set_parent failed for clk i2c8, parent pll_aon (-22) clk_set_parent failed for clk spi2, parent pll_aon (-22) clk_set_parent failed for clk pwm4, parent pll_aon (-22) clk_dt_late initialized machine_check initialized pm_post initialized dbells initialized avfs_clk_platform_post initialized dmce initialized cvc initialized ccplex_avfs_hw_init: nafll_cluster0: not monitored ccplex_avfs_hw_init: nafll_cluster2: not monitored ccplex_avfs_hw_init: nafll_cluster3: not monitored avfs_clk_mach_post initialized regulator_post initialized rm initialized sc7_diag initialized thermal_test initialized serial_late initialized clk_post initialized clk_dt_post initialized mc_reg initialized pg_post initialized dyn_modules initialized sku_debugfs initialized speedo_debugfs initialized adc_debugfs initialized Failed to register PTO counter for id 281 Failed to register PTO counter for id 281 Failed to register PTO counter for id 281 Failed to register PTO counter for id 281 clk_debugfs initialized emc_debugfs initialized dvs_debugfs initialized fmon_debugfs_init_one: no clock debugfs node to attach FMON_NAFLL_CLUSTER1 fmon_debugfs initialized vmon_debugfs initialized pg_debugfs initialized profile_fs initialized debugfs_cons initialized mail_fs initialized profile initialized cvc_debugfs initialized dmce_debugfs initialized ec_debugfs initialized rm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed rm_debugfs initialized soctherm_debug initialized gr_reader initialized mods initialized dt_fs initialized debugfs_mrq initialized debug_mrq initialized debug_safereg initialized initializing target calling apps_init() starting app shell entering main console loop ] ÿá[0001.349] I> 2) Base:0xf2000000 Size:0x00200000 [0001.528] I> 3) Base:0xf1200000 Size:0x00200000 [0001.533] I> 4) Base:0xf1000000 Size:0x00100000 [0001.537] I> 5) Base:0xf0f00000 Size:0x00100000 [0001.542] I> 6) Base:0xf3800000 Size:0x00400000 [0001.546] I> 7) Base:0xf1c00000 Size:0x00400000 [0001.551] I> 8) Base:0xf0e00000 Size:0x00100000 [0001.555] I> 9) Base:0xf0d00000 Size:0x00100000 [0001.560] I> 10) Base:0xf3000000 Size:0x00800000 [0001.564] I> 11) Base:0x40000000 Size:0x00040000 [0001.569] I> 12) Base:0xf0c00000 Size:0x00100000 [0001.573] I> 13) Base:0x40046000 Size:0x00002000 [0001.577] I> 14) Base:0x40048000 Size:0x00002000 [0001.582] I> 15) Base:0xac000000 Size:0x00004000 [0001.586] I> 16) Base:0x4004a000 Size:0x00002000 [0001.591] I> 17) Base:0xf0b00000 Size:0x00100000 [0001.595] I> 18) Base:0x4004c000 Size:0x00002000 [0001.600] I> 19) Base:0xf2200000 Size:0x00600000 [0001.604] I> 20) Base:0x4004e000 Size:0x00002000 [0001.609] I> 21) Base:0xf09d0000 Size:0x0000c000 [0001.613] I> 22) Base:0x00000000 Size:0x00000000 [0001.618] I> 23) Base:0xf09e0000 Size:0x00020000 [0001.622] I> 24) Base:0xf6000000 Size:0x02000000 [0001.627] I> 25) Base:0x40050000 Size:0x00002000 [0001.631] I> 26) Base:0x40040000 Size:0x00006000 [0001.635] I> 27) Base:0xf1800000 Size:0x00400000 [0001.640] I> 28) Base:0xf4c00000 Size:0x01400000 [0001.644] I> 29) Base:0xf1400000 Size:0x00400000 [0001.649] I> 30) Base:0xf0a00000 Size:0x00100000 [0001.653] I> 31) Base:0x00000000 Size:0x00000000 [0001.658] I> 32) Base:0xf8000000 Size:0x08000000 [0001.662] I> 33) Base:0x00000000 Size:0x00000000 [0001.667] I> 34) Base:0xf3c00000 Size:0x01000000 [0001.671] I> 35) Base:0xab000000 Size:0x01000000 [0001.676] I> 36) Base:0xa0000000 Size:0x0b000000 [0001.680] I> 37) Base:0xf2800000 Size:0x00800000 [0001.685] I> 38) Base:0x80000000 Size:0x20000000 [0001.689] I> 39) Base:0xb0000000 Size:0x08000000 [0001.693] I> 40) Base:0x00000000 Size:0x00000000 [0001.698] I> 41) Base:0x00000000 Size:0x00000000 [0001.702] I> 42) Base:0x00000000 Size:0x00000000 [0001.707] I> 43) Base:0x00000000 Size:0x00000000 [0001.711] I> 44) Base:0x00000000 Size:0x00000000 [0001.716] I> 45) Base:0x00000000 Size:0x00000000 [0001.720] GIC-SPI Target CPU: 0 [0001.723] Interrupts Init done [0001.726] [MANNY]platform_early_init...done [0001.730] [MANNY]target_early_init... [0001.734] [MANNY]target_early_init...done [0001.738] [MANNY]call_constructors... [0001.741] calling constructors [0001.744] [MANNY]call_constructors...done [0001.748] [MANNY]tegrabl_printf... [0001.751] initializing heap [0001.754] [MANNY]tegrabl_printf...done [0001.757] [MANNY]platform_init_heap... [0001.761] I> Heap: [0xa06831d8 ... 0xab000000] [0001.765] [MANNY]platform_init_heap...done [0001.769] [MANNY]kernel_init... [0001.772] initializing threads [0001.775] initializing timers [0001.778] [MANNY]kernel_init...done [0001.781] [MANNY]thread_create... [0001.784] creating bootstrap completion thread [0001.788] [MANNY]autorecovery_init... [0001.792] [MANNY]gpio_config... [0001.795] [0001.796] ----------------------------------------------- [0001.801] Synchronous Exception: DATA ABORT (FAR: 28) [0001.806] ----------------------------------------------- [0001.811] PAR_ELX: 0x80f [0001.814] [0001.815] ESR 0x96000007: ec 0x25, il 0x1, iss 0x7 [0001.820] ----------------------------------------------- [0001.825] [Stack Trace] [0001.827] [0001.828] => pc:0xA060ED10, sp:0xA067DDA0 [0001.832] => pc:0xA060018C, sp:0xA067DFD0 [0001.836] ----------------------------------------------- [0001.841] iframe 0xa067dcb0: [0001.844] x0 0x 0 x1 0x 3e8 x2 0x a x3 0x 16 [0001.853] x4 0x 0 x5 0x a067ddd0 x6 0x 20 x7 0x 7 [0001.862] x8 0x 0 x9 0x a x10 0x aafff60f x11 0x a0600010 [0001.871] x12 0x 0 x13 0x 0 x14 0x 0 x15 0x 3c0 [0001.880] x16 0x 0 x17 0x 0 x18 0x a600000 x19 0x a065b2e8 [0001.889] x20 0x 0 x21 0x 0 x22 0x a0600190 x23 0x 0 [0001.899] x24 0x 0 x25 0x 0 x26 0x 0 x27 0x 0 [0001.908] x28 0x 0 x29 0x a067dfd0 lr 0x a060ed0c sp 0x a067dda0 [0001.917] elr 0x a060ed10 [0001.920] spsr 0x 600002c9 [0001.923] ----------------------------------------------- [0001.928] panic (caller 0xa0601238): die [0001.932] HALT: spinning forever... ÿâ [0000.024] W> RATCHET: MB1 binary ratchet value 4 is too large than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 1.5.1.3-t194-41334769-d2a21c57) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Chip revision : A02P [0000.044] I> Bootrom patch version : 15 (correctly patched) [0000.049] I> ATE fuse revision : 0x200 [0000.053] I> Ram repair fuse : 0x0 [0000.056] I> Ram Code : 0x0 [0000.058] I> rst_source : 0x0 [0000.061] I> rst_level : 0x0 [0000.065] I> Boot-device: QSPI [0000.067] I> Qspi flash params source = brbct [0000.071] I> Qspi using bpmp-dma [0000.074] I> Qspi clock source : pllp [0000.078] I> QSPI Flash Size = 32 MB [0000.081] I> Qspi initialized successfully [0000.085] W> No valid slot number is found in scratch register [0000.091] W> Return default slot: _a [0000.094] I> Active Boot chain : 0 [0000.097] I> Boot-device: QSPI [0000.100] I> Qspi flash params source = brbct [0000.106] W> MB1_PLATFORM_CONFIG: device prod data is empty in MB1 BCT. [0000.113] I> Temperature = 36000 [0000.116] W> Skipping boost for clk: BPMP_CPU_NIC [0000.121] W> Skipping boost for clk: BPMP_APB [0000.125] W> Skipping boost for clk: AXI_CBB [0000.129] W> Skipping boost for clk: AON_CPU_NIC [0000.133] W> Skipping boost for clk: CAN1 [0000.137] W> Skipping boost for clk: CAN2 [0000.141] I> Boot-device: QSPI [0000.144] I> Boot-device: QSPI [0000.147] I> Qspi flash params source = mb1bct [0000.151] I> Qspi using bpmp-dma [0000.154] I> Qspi clock source : pllc_out0 [0000.158] I> Qspi reinitialized [0000.160] I> Qspi flash params source = mb1bct [0000.166] I> ECC region[0]: Start:0x0, End:0x0 [0000.170] I> ECC region[1]: Start:0x0, End:0x0 [0000.174] I> ECC region[2]: Start:0x0, End:0x0 [0000.178] I> ECC region[3]: Start:0x0, End:0x0 [0000.182] I> ECC region[4]: Start:0x0, End:0x0 [0000.187] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.192] I> Non-ECC region[1]: Start:0x0, End:0x0 [0000.197] I> Non-ECC region[2]: Start:0x0, End:0x0 [0000.201] I> Non-ECC region[3]: Start:0x0, End:0x0 [0000.206] I> Non-ECC region[4]: Start:0x0, End:0x0 [0000.211] E> FAILED: Thermal config [0000.218] E> FAILED: MEMIO rail config [0000.229] I> Boot-device: QSPI [0000.231] I> Qspi flash params source = mb1bct [0000.241] I> Qspi flash params source = mb1bct [0000.252] I> Qspi flash params source = mb1bct [0000.319] I> Qspi flash params source = mb1bct [0000.328] I> Qspi flash params source = mb1bct [0000.355] I> Qspi flash params source = mb1bct [0000.367] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.14 Created: Sep 19 2018 @ 11:03:21 HW Function test Start Scheduler. in late init ÿâ [0000.375] I> Welcome to MB2(TBoot-BPMP) (version: 00.00.2018.32-mobile-389501e9) [0000.376] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.376] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.377] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.383] W> device prod register failed [0000.387] I> Boot-device: QSPI [0000.389] I> Boot_device: QSPI_FLASH instance: 0 [0000.395] I> QSPI Flash Size = 32 MB [0000.400] I> Qspi initialized successfully [0000.401] I> qspi flash-0 params source = boot args [0000.783] I> sdmmc DDR50 mode [0000.785] I> sdmmc-3 params source = safe params [0000.790] I> Found 47 partitions in QSPI_FLASH (instance 0) [0000.792] W> Cannot find any partition table for 00000003 [0000.796] I> Found 11 partitions in SDMMC_USER (instance 3) [0000.798] W> No valid slot number is found in scratch register [0000.798] W> Return default slot: _a [0000.798] I> Active Boot chain : 0 [0000.799] I> parsing oem signed section of bpmp-fw header done [0000.800] I> bpmp-fw binary init read from storage [0000.805] I> oem authentication of bpmp-fw header done [0000.819] I> bpmp-fw binary done read from storage [0000.819] I> bpmp-fw: Authentication init Done [0000.820] I> parsing oem signed section of cpubl header done [0000.824] I> cpubl binary init read from storage [0000.828] I> bpmp-fw: Authentication Finalize Done [0000.833] I> oem authentication of cpubl header done [0000.839] I> cpubl binary done read from storage [0000.842] I> cpubl: Authentication init Done [0000.847] I> parsing oem signed section of rce header done [0000.852] I> rce binary init read from storage [0000.856] I> Relocating BR-BCT [0000.859] I> cpubl: Authentication Finalize Done [0000.863] I> oem authentication of rce header done [0000.868] I> rce binary done read from storage [0000.872] I> rce: Authentication init Done [0000.876] I> parsing oem signed section of ape header done [0000.881] I> ape binary init read from storage [0000.886] I> rce: Authentication Finalize Done [0000.890] I> oem authentication of ape header done [0000.895] I> ape binary done read from storage [0000.899] I> ape: Authentication init Done [0000.903] I> parsing oem signed section of tos header done [0000.908] I> tos binary init read from storage [0000.912] I> ape: Authentication Finalize Done [0000.917] I> oem authentication of tos header done [0000.923] I> tos binary done read from storage [0000.926] I> tos: Authentication init Done [0000.930] I> parsing oem signed section of bpmp-fw-dtb header done [0000.936] I> bpmp-fw-dtb binary init read from storage [0000.941] I> tos: Authentication Finalize Done [0000.946] I> oem authentication of bpmp-fw-dtb header done [0000.950] I> bpmp-fw-dtb binary done read from storage [0000.955] I> bpmp-fw-dtb: Authentication init Done [0000.960] I> parsing oem signed section of cpubl-dtb header done [0000.966] I> cpubl-dtb binary init read from storage [0000.970] I> bpmp-fw-dtb: Authentication Finalize Done [0001.028] I> oem authentication of cpubl-dtb header done [0001.029] I> cpubl-dtb binary done read from storage [0001.030] I> cpubl-dtb: Authentication init Done [0001.031] I> parsing oem signed section of eks header done [0001.031] I> eks binary init read from storage [0001.032] I> cpubl-dtb: Authentication Finalize Done [0001.033] I> oem authentication of eks header done [0001.037] I> eks binary done read from storage [0001.041] I> eks: Authentication init Done [0001.045] I> eks: Authentication Finalize Done [0001.049] I> EKB detected (length: 0x410) @ VA:0x52714400 ÿäNOTICE: BL31: v1.3(release):de895fd9e NOTICE: BL31: Built : 12:15:31, Oct 16 2020 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! hwkey-agent: 40: hwkey-agent is running!! hwkey-agent: 182: key_mgnt_processing ....... hwkey-agent: 157: Init hweky-agent services!! platform_bootstrap_epilog: trusty bootstrap complete ÿâ welcome to lk calling constructors initializing heap creating bootstrap completion thread top of bootstrap2() initializing platform bpmp: platform_init tag is 57f8a77779f848bf2ecf21dabee5645f tag_show initialized dt initialized mail initialized chipid initialized fuse initialized sku initialized speedo initialized ec_get_ec_list: found 45 ecs ec initialized ec_mrq initialized vmon_populate_monitors: found 3 monitors vmon initialized adc initialized fmon_populate_monitors: found 73 monitors fmon initialized fmon_mrq initialized reset initialized nvhs initialized 391 clocks registered clk_mrq_init: mrq handler registered clk initialized nvlink initialized io_dpd initialized io_dpd initialized thermal initialized i2c5 controller initialized initialized i2c mrq handling i2c initialized regulator initialized avfs_clk_platform_init: bad clk id in clock@cluster1_avfs avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized pg_late initialized strap initialized tag initialized emc initialized clk_dt initialized avfs_ccplex_platform initialized tj_max: dt node not found tj_init initialized uphy_mrq_init: mrq handler registered uphy_dt initialized uphy initialized safereg_init: period 80 ms ec_late initialized mrq initialized ÿá [0001.391] I> Welcome to Cboot [0001.391] I> Cboot Version: t194-3ec4cbfdÿâWARNING: no registered clock for FMON_NAFLL_CLUSTER1 (id 281) fmon_post initialized ÿá [0001.393] I> CPU-BL Params @ 0xf2820000 [0001.397] I> 0) Base:0x00000000 Size:0x00000000 [0001.401] I> 1) Base:0xf1100000 Size:0x00100000 ÿâclk_set_parent failed for clk can1, parent pll_aon (-22) clk_set_parent failed for clk can2, parent pll_aon (-22) clk_set_parent failed for clk dmic5, parent pll_aon (-22) clk_set_parent failed for clk i2c2, parent pll_aon (-22) clk_set_parent failed for clk i2c8, parent pll_aon (-22) clk_set_parent failed for clk spi2, parent pll_aon (-22) clk_set_parent failed for clk pwm4, parent pll_aon (-22) clk_dt_late initialized machine_check initialized pm_post initialized dbells initialized avfs_clk_platform_post initialized dmce initialized cvc initialized ccplex_avfs_hw_init: nafll_cluster0: not monitored ccplex_avfs_hw_init: nafll_cluster2: not monitored ccplex_avfs_hw_init: nafll_cluster3: not monitored avfs_clk_mach_post initialized regulator_post initialized rm initialized sc7_diag initialized thermal_test initialized serial_late initialized clk_post initialized clk_dt_post initialized mc_reg initialized pg_post initialized dyn_modules initialized sku_debugfs initialized speedo_debugfs initialized adc_debugfs initialized Failed to register PTO counter for id 281 Failed to register PTO counter for id 281 Failed to register PTO counter for id 281 Failed to register PTO counter for id 281 clk_debugfs initialized emc_debugfs initialized dvs_debugfs initialized fmon_debugfs_init_one: no clock debugfs node to attach FMON_NAFLL_CLUSTER1 fmon_debugfs initialized vmon_debugfs initialized pg_debugfs initialized profile_fs initialized debugfs_cons initialized mail_fs initialized profile initialized cvc_debugfs initialized dmce_debugfs initialized ec_debugfs initialized rm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed rm_debugfs initialized soctherm_debug initialized gr_reader initialized mods initialized dt_fs initialized debugfs_mrq initialized debug_mrq initialized debug_safereg initialized initializing target calling apps_init() starting app shell entering main console loop ] ÿá[0001.406] I> 2) Base:0xf2000000 Size:0x00200000 [0001.585] I> 3) Base:0xf1200000 Size:0x00200000 [0001.590] I> 4) Base:0xf1000000 Size:0x00100000 [0001.594] I> 5) Base:0xf0f00000 Size:0x00100000 [0001.599] I> 6) Base:0xf3800000 Size:0x00400000 [0001.603] I> 7) Base:0xf1c00000 Size:0x00400000 [0001.608] I> 8) Base:0xf0e00000 Size:0x00100000 [0001.612] I> 9) Base:0xf0d00000 Size:0x00100000 [0001.617] I> 10) Base:0xf3000000 Size:0x00800000 [0001.621] I> 11) Base:0x40000000 Size:0x00040000 [0001.626] I> 12) Base:0xf0c00000 Size:0x00100000 [0001.630] I> 13) Base:0x40046000 Size:0x00002000 [0001.635] I> 14) Base:0x40048000 Size:0x00002000 [0001.639] I> 15) Base:0xac000000 Size:0x00004000 [0001.643] I> 16) Base:0x4004a000 Size:0x00002000 [0001.648] I> 17) Base:0xf0b00000 Size:0x00100000 [0001.652] I> 18) Base:0x4004c000 Size:0x00002000 [0001.657] I> 19) Base:0xf2200000 Size:0x00600000 [0001.661] I> 20) Base:0x4004e000 Size:0x00002000 [0001.666] I> 21) Base:0xf09d0000 Size:0x0000c000 [0001.670] I> 22) Base:0x00000000 Size:0x00000000 [0001.675] I> 23) Base:0xf09e0000 Size:0x00020000 [0001.679] I> 24) Base:0xf6000000 Size:0x02000000 [0001.684] I> 25) Base:0x40050000 Size:0x00002000 [0001.688] I> 26) Base:0x40040000 Size:0x00006000 [0001.693] I> 27) Base:0xf1800000 Size:0x00400000 [0001.697] I> 28) Base:0xf4c00000 Size:0x01400000 [0001.701] I> 29) Base:0xf1400000 Size:0x00400000 [0001.706] I> 30) Base:0xf0a00000 Size:0x00100000 [0001.710] I> 31) Base:0x00000000 Size:0x00000000 [0001.715] I> 32) Base:0xf8000000 Size:0x08000000 [0001.719] I> 33) Base:0x00000000 Size:0x00000000 [0001.724] I> 34) Base:0xf3c00000 Size:0x01000000 [0001.728] I> 35) Base:0xab000000 Size:0x01000000 [0001.733] I> 36) Base:0xa0000000 Size:0x0b000000 [0001.737] I> 37) Base:0xf2800000 Size:0x00800000 [0001.742] I> 38) Base:0x80000000 Size:0x20000000 [0001.746] I> 39) Base:0xb0000000 Size:0x08000000 [0001.751] I> 40) Base:0x00000000 Size:0x00000000 [0001.755] I> 41) Base:0x00000000 Size:0x00000000 [0001.759] I> 42) Base:0x00000000 Size:0x00000000 [0001.764] I> 43) Base:0x00000000 Size:0x00000000 [0001.768] I> 44) Base:0x00000000 Size:0x00000000 [0001.773] I> 45) Base:0x00000000 Size:0x00000000 [0001.777] GIC-SPI Target CPU: 0 [0001.780] Interrupts Init done [0001.783] [MANNY]platform_early_init...done [0001.787] [MANNY]target_early_init... [0001.791] [MANNY]target_early_init...done [0001.795] [MANNY]call_constructors... [0001.798] calling constructors [0001.801] [MANNY]call_constructors...done [0001.805] [MANNY]tegrabl_printf... [0001.808] initializing heap [0001.811] [MANNY]tegrabl_printf...done [0001.814] [MANNY]platform_init_heap... [0001.818] I> Heap: [0xa06831d8 ... 0xab000000] [0001.822] [MANNY]platform_init_heap...done [0001.826] [MANNY]kernel_init... [0001.829] initializing threads [0001.832] initializing timers [0001.835] [MANNY]kernel_init...done [0001.838] [MANNY]thread_create... [0001.841] creating bootstrap completion thread [0001.846] [MANNY]autorecovery_init... [0001.849] [MANNY]gpio_config... [0001.852] [0001.853] ----------------------------------------------- [0001.858] Synchronous Exception: DATA ABORT (FAR: 28) [0001.863] ----------------------------------------------- [0001.869] PAR_ELX: 0x80f [0001.871] [0001.872] ESR 0x96000007: ec 0x25, il 0x1, iss 0x7 [0001.877] ----------------------------------------------- [0001.882] [Stack Trace] [0001.884] [0001.885] => pc:0xA060ED10, sp:0xA067DDA0 [0001.889] => pc:0xA060018C, sp:0xA067DFD0 [0001.893] ----------------------------------------------- [0001.898] iframe 0xa067dcb0: [0001.901] x0 0x 0 x1 0x 3e8 x2 0x a x3 0x 16 [0001.910] x4 0x 0 x5 0x a067ddd0 x6 0x 20 x7 0x 8 [0001.919] x8 0x 0 x9 0x a x10 0x aafff60f x11 0x a0600010 [0001.928] x12 0x 0 x13 0x 0 x14 0x 0 x15 0x 3c0 [0001.937] x16 0x 0 x17 0x 0 x18 0x a600000 x19 0x a065b2e8 [0001.947] x20 0x 0 x21 0x 0 x22 0x a0600190 x23 0x 0 [0001.956] x24 0x 0 x25 0x 0 x26 0x 0 x27 0x 0 [0001.965] x28 0x 0 x29 0x a067dfd0 lr 0x a060ed0c sp 0x a067dda0 [0001.974] elr 0x a060ed10 [0001.977] spsr 0x 600002c9 [0001.980] ----------------------------------------------- [0001.985] panic (caller 0xa0601238): die [0001.989] HALT: spinning forever... ŒŒ€ŒŒŒŒŒŒŒŒŒŒŒ€ŒŒŒŒŒŒ€ŒŒŒŒŒŒÂŒÌ¼ÌŒŒŒ¼ÌÌŒŒŒŒ€Œ€ŒŒŒŒŒŒŒŒŒŒŒŒŒŒŒŒ¼ÎÂÎòÌüŒŒŒþþþþþþþþþþþŽÂŒŒŒŒŒ€ŒŒŒŒŒŒŒŒ€ŒŒŒŒŒŒŒŒŒ€Œ€ŒŒŒŒŒ€Œ€ŒŒŒŒ€€ŒŒŒ€ŒŒŒŒŒŒŒ€ŒŒŒ