Lattice Semiconductor Corporation. Radiant Programmer Radiant Software (64-bit) 2022.1.1.289.4 Encryption (Database Version R2022.1) System Information: ----------------------------------------------------- Microsoft(R) Windows(R) 10.0 64-bit Intel(R) Core(TM) i5-10210U CPU @ 1.60GHz Board with FTDI USB Host Chip detected. Frequency setting= 1153846 Hz Failed to scan board. Cable Auto Detection Activated. Board with FTDI USB Host Chip detected. No Lattice HW-USBN-2A cable detected. Current LPT Port Mode: Config (It's recommend that the LPT Port Mode be changed to "SPP" mode by using the Cable and I/O Port Setup->Auto Detect.) No cable detected at 0x378 Current LPT Port Mode: Config (It's recommend that the LPT Port Mode be changed to "SPP" mode by using the Cable and I/O Port Setup->Auto Detect.) No cable detected at 0x278 Current LPT Port Mode: Config (It's recommend that the LPT Port Mode be changed to "SPP" mode by using the Cable and I/O Port Setup->Auto Detect.) No cable detected at 0x3bc No Lattice HW-DLN-3C (parallel) cable detected. Device1 JTAG-NOP: Bypass Instruction Register Length is invalid. Check configuration setup: Unsuccessful. Board with FTDI USB Host Chip detected. Failed to scan board. Cable Auto Detection Activated. Board with FTDI USB Host Chip detected. No Lattice HW-USBN-2A cable detected. Current LPT Port Mode: Config (It's recommend that the LPT Port Mode be changed to "SPP" mode by using the Cable and I/O Port Setup->Auto Detect.) No cable detected at 0x378 Current LPT Port Mode: Config (It's recommend that the LPT Port Mode be changed to "SPP" mode by using the Cable and I/O Port Setup->Auto Detect.) No cable detected at 0x278 Current LPT Port Mode: Config (It's recommend that the LPT Port Mode be changed to "SPP" mode by using the Cable and I/O Port Setup->Auto Detect.) No cable detected at 0x3bc No Lattice HW-DLN-3C (parallel) cable detected. Device1 JTAG-NOP: Bypass Instruction Register Length is invalid. Check configuration setup: Unsuccessful. Board with FTDI USB Host Chip detected. Failed to scan board. Cable Auto Detection Activated. Board with FTDI USB Host Chip detected. No Lattice HW-USBN-2A cable detected. Current LPT Port Mode: Config (It's recommend that the LPT Port Mode be changed to "SPP" mode by using the Cable and I/O Port Setup->Auto Detect.) No cable detected at 0x378 Current LPT Port Mode: Config (It's recommend that the LPT Port Mode be changed to "SPP" mode by using the Cable and I/O Port Setup->Auto Detect.) No cable detected at 0x278 Current LPT Port Mode: Config (It's recommend that the LPT Port Mode be changed to "SPP" mode by using the Cable and I/O Port Setup->Auto Detect.) No cable detected at 0x3bc No Lattice HW-DLN-3C (parallel) cable detected. Device1 JTAG-NOP: Bypass Instruction Register Length is invalid. Check configuration setup: Unsuccessful. Board with FTDI USB Host Chip detected. Failed to scan board. Cable Auto Detection Activated. Board with FTDI USB Host Chip detected. No Lattice HW-USBN-2A cable detected. Current LPT Port Mode: Config (It's recommend that the LPT Port Mode be changed to "SPP" mode by using the Cable and I/O Port Setup->Auto Detect.) No cable detected at 0x378 Current LPT Port Mode: Config (It's recommend that the LPT Port Mode be changed to "SPP" mode by using the Cable and I/O Port Setup->Auto Detect.) No cable detected at 0x278 Current LPT Port Mode: Config (It's recommend that the LPT Port Mode be changed to "SPP" mode by using the Cable and I/O Port Setup->Auto Detect.) No cable detected at 0x3bc No Lattice HW-DLN-3C (parallel) cable detected. Device1 JTAG-NOP: Bypass Instruction Register Length is invalid. Check configuration setup: Unsuccessful. Board with FTDI USB Host Chip detected. Failed to scan board. Cable Auto Detection Activated. Board with FTDI USB Host Chip detected. No Lattice HW-USBN-2A cable detected. Current LPT Port Mode: Config (It's recommend that the LPT Port Mode be changed to "SPP" mode by using the Cable and I/O Port Setup->Auto Detect.) No cable detected at 0x378 Current LPT Port Mode: Config (It's recommend that the LPT Port Mode be changed to "SPP" mode by using the Cable and I/O Port Setup->Auto Detect.) No cable detected at 0x278 Current LPT Port Mode: Config (It's recommend that the LPT Port Mode be changed to "SPP" mode by using the Cable and I/O Port Setup->Auto Detect.) No cable detected at 0x3bc No Lattice HW-DLN-3C (parallel) cable detected. Device1 JTAG-NOP: Bypass Instruction Register Length is invalid. Check configuration setup: Unsuccessful. Board with FTDI USB Host Chip detected. Frequency setting= 2727272 Hz Failed to scan board. Cable Auto Detection Activated. Board with FTDI USB Host Chip detected. No Lattice HW-USBN-2A cable detected. Current LPT Port Mode: Config (It's recommend that the LPT Port Mode be changed to "SPP" mode by using the Cable and I/O Port Setup->Auto Detect.) No cable detected at 0x378 Current LPT Port Mode: Config (It's recommend that the LPT Port Mode be changed to "SPP" mode by using the Cable and I/O Port Setup->Auto Detect.) No cable detected at 0x278 Current LPT Port Mode: Config (It's recommend that the LPT Port Mode be changed to "SPP" mode by using the Cable and I/O Port Setup->Auto Detect.) No cable detected at 0x3bc No Lattice HW-DLN-3C (parallel) cable detected. Cable Auto Detection Activated. Board with FTDI USB Host Chip detected. No Lattice HW-USBN-2A cable detected. Current LPT Port Mode: Config (It's recommend that the LPT Port Mode be changed to "SPP" mode by using the Cable and I/O Port Setup->Auto Detect.) No cable detected at 0x378 Current LPT Port Mode: Config (It's recommend that the LPT Port Mode be changed to "SPP" mode by using the Cable and I/O Port Setup->Auto Detect.) No cable detected at 0x278 Current LPT Port Mode: Config (It's recommend that the LPT Port Mode be changed to "SPP" mode by using the Cable and I/O Port Setup->Auto Detect.) No cable detected at 0x3bc No Lattice HW-DLN-3C (parallel) cable detected. Device1 JTAG-NOP: Bypass Instruction Register Length is invalid. Check configuration setup: Unsuccessful. Board with FTDI USB Host Chip detected. Cable Auto Detection Activated. No Board with FTDI USB Host Chip detected. No Lattice HW-USBN-2A cable detected. Current LPT Port Mode: Config (It's recommend that the LPT Port Mode be changed to "SPP" mode by using the Cable and I/O Port Setup->Auto Detect.) No cable detected at 0x378 Current LPT Port Mode: Config (It's recommend that the LPT Port Mode be changed to "SPP" mode by using the Cable and I/O Port Setup->Auto Detect.) No cable detected at 0x278 Current LPT Port Mode: Config (It's recommend that the LPT Port Mode be changed to "SPP" mode by using the Cable and I/O Port Setup->Auto Detect.) No cable detected at 0x3bc No Lattice HW-DLN-3C (parallel) cable detected. Cable Auto Detection Activated. Board with FTDI USB Host Chip detected. No Lattice HW-USBN-2A cable detected. Current LPT Port Mode: Config (It's recommend that the LPT Port Mode be changed to "SPP" mode by using the Cable and I/O Port Setup->Auto Detect.) No cable detected at 0x378 Current LPT Port Mode: Config (It's recommend that the LPT Port Mode be changed to "SPP" mode by using the Cable and I/O Port Setup->Auto Detect.) No cable detected at 0x278 Current LPT Port Mode: Config (It's recommend that the LPT Port Mode be changed to "SPP" mode by using the Cable and I/O Port Setup->Auto Detect.) No cable detected at 0x3bc No Lattice HW-DLN-3C (parallel) cable detected. JEDEC file cannot be found. Check configuration setup: Unsuccessful. Board with FTDI USB Host Chip detected. Board with FTDI USB Host Chip detected. Board with FTDI USB Host Chip detected. --------------------------------------------- Device 1 LIFCL-40: Memory Type: External SPI Flash Memory (SPI FLASH) Port Interface: JTAG2SPI Access Mode: Direct Programming Operation: Erase,Program,Verify File Date/time: 06/22/22 16:38:57 --------------------------------------------- Board with FTDI USB Host Chip detected. Check configuration setup: Start. Check configuration setup: Successful (Ignored JTAG Connection Checking). Device1 LIFCL-40: LIFCL-40: Refresh Verify ID Execution time: 00 min : 05 sec Operation Done. No errors. Device1 LIFCL-40: MX25L12833F: Erase,Program,Verify Initializing... IDCode Checking... Enabling... Erasing... Disabling... Enabling... Programming... Disabling... Verifying... Execution time: 00 min : 16 sec Operation Done. No Error. Elapsed time: 00 min : 21 sec Operation: successful.