[0000.346] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-1b8ce67c) [0000.355] I> bit @ 0xd480000 [0000.358] I> Boot-device: eMMC [0000.362] I> sdmmc bdev is already initialized [0000.366] I> pmic: reset reason (nverc) : 0x80 [0000.373] I> Found 16 partitions in SDMMC_BOOT (instance 3) [0000.380] I> Found 31 partitions in SDMMC_USER (instance 3) [0000.386] I> A/B: bin_type (16) slot 0 [0000.390] I> Loading partition bpmp-fw at 0xd7800000 [0000.394] I> Reading two headers - addr:0xd7800000 blocks:1 [0000.400] I> Addr: 0xd7800000, start-block: 37804040, num_blocks: 1 [0000.415] I> Binary(16) of size 533504 is loaded @ 0xd7800000 [0000.421] I> A/B: bin_type (17) slot 0 [0000.424] I> Loading partition bpmp-fw-dtb at 0xd79f0000 [0000.429] I> Reading two headers - addr:0xd79f0000 blocks:1 [0000.435] I> Addr: 0xd79f0000, start-block: 37806456, num_blocks: 1 [0000.452] I> Binary(17) of size 604640 is loaded @ 0xd796c400 [0000.682] I> Loading SCE-FW ... [0000.685] I> A/B: bin_type (12) slot 0 [0000.689] I> Loading partition sce-fw at 0xd7300000 [0000.694] I> Reading two headers - addr:0xd7300000 blocks:1 [0000.699] I> Addr: 0xd7300000, start-block: 37810552, num_blocks: 1 [0000.709] I> Binary(12) of size 125168 is loaded @ 0xd7300000 [0000.715] I> Init SCE [0000.718] I> Loading APE-FW ... [0000.720] I> A/B: bin_type (11) slot 0 [0000.724] I> Loading partition adsp-fw at 0xd7400000 [0000.729] I> Reading two headers - addr:0xd7400000 blocks:1 [0000.734] I> Addr: 0xd7400000, start-block: 37787656, num_blocks: 1 [0000.745] I> Binary(11) of size 107808 is loaded @ 0xd7400000 [0000.751] I> Copy BTCM section [0000.753] I> A/B: bin_type (13) slot 0 [0000.757] I> Loading partition cpu-bootloader at 0x96000000 [0000.763] I> Reading two headers - addr:0x96000000 blocks:1 [0000.768] I> Addr: 0x96000000, start-block: 37767176, num_blocks: 1 [0000.780] I> Binary(13) of size 277776 is loaded @ 0x96000000 [0000.786] I> A/B: bin_type (20) slot 0 [0000.790] I> Loading partition bootloader-dtb at 0x8520f400 [0000.795] I> Reading two headers - addr:0x8520f400 blocks:1 [0000.800] I> Addr: 0x8520f400, start-block: 37769224, num_blocks: 1 [0000.815] I> Binary(20) of size 312576 is loaded @ 0x8520f400 [0000.821] I> A/B: bin_type (14) slot 0 [0000.824] I> Loading partition secure-os at 0x8530f600 [0000.830] I> Reading two headers - addr:0x8530f600 blocks:1 [0000.835] I> Addr: 0x8530f600, start-block: 37771272, num_blocks: 1 [0000.847] I> Binary(14) of size 312752 is loaded @ 0x8530f600 [0000.855] I> TOS boot-params @ 0x85000000 [0000.858] I> TOS params prepared [0000.862] I> Loading EKS ... [0000.864] I> A/B: bin_type (15) slot 0 [0000.868] I> Loading partition eks at 0x8590f800 [0000.872] I> Reading two headers - addr:0x8590f800 blocks:1 [0000.878] I> Addr: 0x8590f800, start-block: 37783560, num_blocks: 1 [0000.886] I> Binary(15) of size 1040 is loaded @ 0x8590f800 [0000.892] I> EKB detected (length: 0x400) @ 0x8590f800 [0000.897] I> Copied encrypted keys [0000.900] I> boot profiler @ 0x275844000 [0000.904] I> boot profiler for TOS @ 0x275844000 [0000.909] I> Unhalting SCE [0000.912] I> Primary Memory Start:80000000 Size:70000000 [0000.917] I> Extended Memory Start:f0110000 Size:1856f0000 [0000.924] I> MB2(TBoot-BPMP) done NOTICE: BL31: v1.3(release):a28d87f09 NOTICE: BL31: Built : 21:15:42, Aug 12 2019 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! keystore-demo: 141: Hello world from keystore-demo app keystore-demo: 207: main: EKB contents match expected value exit called, thread 0xffffffffea87ad58, name trusty_app_2_7d18fc60-e9fc-11e8 platform_bootstrap_epilog: trusty bootstrap complete [0001.296] I> Welcome to Cboot [0001.299] I> Cboot Version: t186-13cef13b [0001.302] I> CPU-BL Params @ 0x275800000 [0001.306] I> 0) Base:0x00000000 Size:0x00000000 [0001.311] I> 1) Base:0x277f00000 Size:0x00100000 [0001.315] I> 2) Base:0x277e00000 Size:0x00100000 [0001.320] I> 3) Base:0x277d00000 Size:0x00100000 [0001.324] I> 4) Base:0x277c00000 Size:0x00100000 [0001.329] I> 5) Base:0x277b00000 Size:0x00100000 [0001.333] I> 6) Base:0x277800000 Size:0x00200000 [0001.338] I> 7) Base:0x277400000 Size:0x00400000 [0001.342] I> 8) Base:0x277a00000 Size:0x00100000 [0001.347] I> 9) Base:0x277300000 Size:0x00100000 [0001.351] I> 10) Base:0x276800000 Size:0x00800000 [0001.356] I> 11) Base:0x30000000 Size:0x00040000 [0001.360] I> 12) Base:0xf0000000 Size:0x00100000 [0001.365] I> 13) Base:0x30040000 Size:0x00001000 [0001.369] I> 14) Base:0x30048000 Size:0x00001000 [0001.373] I> 15) Base:0x30049000 Size:0x00001000 [0001.378] I> 16) Base:0x3004a000 Size:0x00001000 [0001.382] I> 17) Base:0x3004b000 Size:0x00001000 [0001.387] I> 18) Base:0x3004c000 Size:0x00001000 [0001.391] I> 19) Base:0x3004d000 Size:0x00001000 [0001.396] I> 20) Base:0x3004e000 Size:0x00001000 [0001.400] I> 21) Base:0x3004f000 Size:0x00001000 [0001.404] I> 22) Base:0x00000000 Size:0x00000000 [0001.409] I> 23) Base:0xf0100000 Size:0x00010000 [0001.413] I> 24) Base:0x00000000 Size:0x00000000 [0001.418] I> 25) Base:0x00000000 Size:0x00000000 [0001.422] I> 26) Base:0x00000000 Size:0x00000000 [0001.427] I> 27) Base:0x00000000 Size:0x00000000 [0001.431] I> 28) Base:0x84400000 Size:0x00400000 [0001.436] I> 29) Base:0x30000000 Size:0x00010000 [0001.440] I> 30) Base:0x278000000 Size:0x08000000 [0001.444] I> 31) Base:0x00000000 Size:0x00000000 [0001.449] I> 32) Base:0x276000000 Size:0x00600000 [0001.453] I> 33) Base:0x80000000 Size:0x70000000 [0001.458] I> 34) Base:0xf0110000 Size:0x1856f0000 [0001.462] I> 35) Base:0x00000000 Size:0x00000000 [0001.467] I> 36) Base:0x00000000 Size:0x00000000 [0001.471] I> 37) Base:0x2772e0000 Size:0x00020000 [0001.476] I> 38) Base:0x84000000 Size:0x00400000 [0001.480] I> 39) Base:0x96000000 Size:0x02000000 [0001.485] I> 40) Base:0x85000000 Size:0x01200000 [0001.489] I> 41) Base:0x275800000 Size:0x00500000 [0001.494] I> 42) Base:0x00000000 Size:0x00000000 [0001.498] I> 43) Base:0x00000000 Size:0x00000000 [0001.502] GIC-SPI Target CPU: 4 [0001.506] Interrupts Init done [0001.509] calling constructors [0001.512] initializing heap [0001.515] initializing threads [0001.518] initializing timers [0001.521] creating bootstrap completion thread [0001.526] top of bootstrap2() [0001.529] CPU: ARM Cortex A57 [0001.532] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100 [0001.537] initializing platform [0001.540] I> Boot-device: eMMC [0001.545] I> sdmmc bdev is already initialized [0001.551] I> Found 16 partitions in SDMMC_BOOT (instance 3) [0001.557] I> Found 31 partitions in SDMMC_USER (instance 3) [0001.563] W> opt-in fuse is not set, skip fuse_burning [0001.568] I> Reserved memory at 0xfbe00000 for U-Boot relocation [0001.574] W> No valid slot number is found in scratch register [0001.579] W> Return default slot: _a [0001.583] I> A/B: bin_type (21) slot 0 [0001.586] I> Loading partition kernel-dtb at 0x80000000 from device(0x1) [0001.601] I> Kernel_dtb @0x80000000 [0001.605] I> Bl_dtb @0x8520f400 [0001.607] I> gpio framework initialized [0001.614] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio' driver [0001.623] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio-aon' driver [0001.631] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee [0001.641] E> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0001.653] E> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0001.661] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0001.667] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xe8 [0001.677] E> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0001.690] E> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0001.698] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0001.706] I> fixed regulator driver initialized [0001.723] I> register 'maxim' power off handle [0001.729] I> virtual i2c enabled [0001.732] I> registered 'maxim,max77620' pmic [0001.737] I> tegrabl_gpio_driver_register: register 'max77620-gpio' driver [0001.749] I> Find /i2c@c250000's alias i2c7 [0001.753] I> Reading eeprom i2c=7 address=0x50 [0001.783] I> Device at /i2c@c250000:0x50 [0001.786] I> Reading eeprom i2c=7 address=0x57 [0001.791] E> I2C: slave not found in slaves. [0001.795] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true. [0001.803] E> I2C_DEV: Failed to send register address 0x00000000. [0001.808] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 7. [0001.818] E> eeprom: Failed to read I2C slave device [0001.823] I> Eeprom read failed 0x3526070d [0001.827] I> Find /i2c@c240000's alias i2c1 [0001.831] I> Reading eeprom i2c=1 address=0x51 [0001.839] E> I2C: Timeout while polling for bus clear. Last value 0x00000000. [0001.846] E> I2C: Failed to clear bus for instance 1. [0001.851] E> I2C: Failed to clear bus for instance 1. [0001.856] E> I2C_DEV: Failed to initialize instance 1. [0001.861] E> eeprom: Can't get handle to eeprom device @162 [0001.866] I> Eeprom read failed 0x3536002a [0001.871] I> Find /i2c@3160000's alias i2c0 [0001.875] I> Reading eeprom i2c=0 address=0x50 [0001.880] E> I2C: slave not found in slaves. [0001.884] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0001.891] E> I2C_DEV: Failed to send register address 0x00000000. [0001.897] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 0. [0001.907] E> eeprom: Failed to read I2C slave device [0001.912] I> Eeprom read failed 0x3526070d [0001.916] I> Find /i2c@3180000's alias i2c2 [0001.920] I> Reading eeprom i2c=2 address=0x54 [0001.925] I> Enabling gpio chip_id = 2, gpio pin = 9 [0001.929] C> GPIO driver for chip_id 0x2 could not be found [0001.935] E> cam_eeprom_read: Can't get gpio driver [0001.940] I> Eeprom read failed 0x4d4d000d [0001.943] I> Reading eeprom i2c=2 address=0x57 [0001.948] I> Enabling gpio chip_id = 2, gpio pin = 9 [0001.952] C> GPIO driver for chip_id 0x2 could not be found [0001.958] E> cam_eeprom_read: Can't get gpio driver [0001.963] I> Eeprom read failed 0x4d4d000d [0001.966] I> create_pm_ids: id: 3310-1000-D00-H, len: 15 [0001.972] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.012] I> hdmi cable connected [0002.020] I> setting 'vdd-pex-1v00' regulator to 1000000 micro volts [0002.031] I> setting 'vdd-1v8' regulator to 1800000 micro volts [0002.040] E> cannot find any other nvdisp nodes [0002.048] E> I2C: slave not found in slaves. [0002.052] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0002.060] E> I2C_DEV: Failed to send register address 0x00000000. [0002.066] E> I2C_DEV: Could not read 128 registers of size 1 from slave 0xa0 at 0x00000000 via instance 3. [0002.075] E> could not read edid [0002.082] I> hdmi_enable, starting HDMI initialisation [0002.090] I> hdmi_enable, HDMI initialisation complete [0002.103] initializing target [0002.106] calling apps_init() [0002.109] starting app kernel_boot_app [0002.120] I> found decompressor handler: lz4-legacy [0002.124] I> decompressing BMP blob ... [0002.134] I> Kernel type = Normal [0002.137] I> Loading kernel from partition ... [0002.142] W> No valid slot number is found in scratch register [0002.147] W> Return default slot: _a [0002.151] I> A/B: bin_type (24) slot 0 [0002.160] I> Boot image size read from image header: f2d10 [0002.165] I> Boot image load address: 0x0x80400000 [0002.170] I> Loading partition kernel at 0x80400000 from device(0x1) [0002.920] I> Kernel hdr @0x80400000 [0002.924] I> Kernel dtb @0x80000000 [0002.927] I> T18x: Authenticate boot.img (bin_type 24), max size 0x4000000 [0002.935] I> T18x: Authenticate tegra194-p2888-0001-p2822-0000.dtb (bin_type 21), max size 0x100000 [0002.944] E> AES verification failed for header 1 [0002.949] E> Kernel-dtb: authentication failed [0002.953] E> kernel boot failed