[0000.212] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-c368a720) [0000.220] I> Boot-device: eMMC [0000.228] I> sdmmc bdev is already initialized [0000.232] I> pmic: reset reason (nverc) : 0x40 [0000.265] I> Found 19 partitions in SDMMC_BOOT (instance 3) [0000.285] I> Found 33 partitions in SDMMC_USER (instance 3) [0000.291] W> No valid slot number is found in scratch register [0000.297] W> Return default slot: _a [0000.300] I> A/B: bin_type (16) slot 0 [0000.304] I> Loading partition bpmp-fw at 0xd7800000 [0000.309] I> Reading two headers - addr:0xd7800000 blocks:1 [0000.314] I> Addr: 0xd7800000, start-block: 29417480, num_blocks: 1 [0000.339] I> Binary(16) of size 534416 is loaded @ 0xd7800000 [0000.345] W> No valid slot number is found in scratch register [0000.350] W> Return default slot: _a [0000.354] I> A/B: bin_type (17) slot 0 [0000.357] I> Loading partition bpmp-fw-dtb at 0xd79f0000 [0000.362] I> Reading two headers - addr:0xd79f0000 blocks:1 [0000.368] I> Addr: 0xd79f0000, start-block: 29419896, num_blocks: 1 [0000.387] I> Binary(17) of size 113248 is loaded @ 0xd79e4400 [0000.415] I> Loading SCE-FW ... [0000.418] W> No valid slot number is found in scratch register [0000.424] W> Return default slot: _a [0000.427] I> A/B: bin_type (12) slot 0 [0000.431] I> Loading partition sce-fw at 0xd7300000 [0000.436] I> Reading two headers - addr:0xd7300000 blocks:1 [0000.441] I> Addr: 0xd7300000, start-block: 29423992, num_blocks: 1 [0000.460] I> Binary(12) of size 125632 is loaded @ 0xd7300000 [0000.466] I> Init SCE [0000.468] I> Loading APE-FW ... [0000.471] W> No valid slot number is found in scratch register [0000.477] W> Return default slot: _a [0000.480] I> A/B: bin_type (11) slot 0 [0000.484] I> Loading partition adsp-fw at 0xd7400000 [0000.489] I> Reading two headers - addr:0xd7400000 blocks:1 [0000.494] I> Addr: 0xd7400000, start-block: 29401096, num_blocks: 1 [0000.513] I> Binary(11) of size 77216 is loaded @ 0xd7400000 [0000.519] I> Copy BTCM section [0000.522] W> No valid slot number is found in scratch register [0000.527] W> Return default slot: _a [0000.531] I> A/B: bin_type (13) slot 0 [0000.534] I> Loading partition cpu-bootloader at 0x96000000 [0000.540] I> Reading two headers - addr:0x96000000 blocks:1 [0000.545] I> Addr: 0x96000000, start-block: 29380616, num_blocks: 1 [0000.566] I> Binary(13) of size 308800 is loaded @ 0x96000000 [0000.572] W> No valid slot number is found in scratch register [0000.578] W> Return default slot: _a [0000.581] I> A/B: bin_type (20) slot 0 [0000.585] I> Loading partition bootloader-dtb at 0x85205400 [0000.590] I> Reading two headers - addr:0x85205400 blocks:1 [0000.596] I> Addr: 0x85205400, start-block: 29382664, num_blocks: 1 [0000.615] I> Binary(20) of size 191040 is loaded @ 0x85205400 [0000.621] W> No valid slot number is found in scratch register [0000.626] W> Return default slot: _a [0000.630] I> A/B: bin_type (14) slot 0 [0000.634] I> Loading partition secure-os at 0x85305600 [0000.639] I> Reading two headers - addr:0x85305600 blocks:1 [0000.644] I> Addr: 0x85305600, start-block: 29384712, num_blocks: 1 [0000.666] I> Binary(14) of size 402864 is loaded @ 0x85305600 [0000.674] I> TOS boot-params @ 0x85000000 [0000.678] I> TOS params prepared [0000.681] I> Loading EKS ... [0000.683] I> A/B: bin_type (15) slot 0 [0000.687] I> Loading partition eks at 0x85905800 [0000.692] I> Reading two headers - addr:0x85905800 blocks:1 [0000.697] I> Addr: 0x85905800, start-block: 29397000, num_blocks: 1 [0000.716] I> Binary(15) of size 1040 is loaded @ 0x85905800 [0000.721] I> EKB detected (length: 0x400) @ 0x85905800 [0000.726] I> Copied encrypted keys [0000.730] I> boot profiler @ 0x175844000 [0000.734] I> boot profiler for TOS @ 0x175844000 [0000.739] I> Unhalting SCE [0000.741] I> Primary Memory Start:80000000 Size:70000000 [0000.746] I> Extended Memory Start:f0110000 Size:856f0000 [0000.753] I> MB2(TBoot-BPMP) done NOTICE: BL31: v1.3(release):b5eeb33f7 NOTICE: BL31: Built : 12:15:17, Jul 26 2021 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! hwkey-agent: 41: hwkey-agent is running!! hwkey-agent: 315: key_mgnt_processing ....... hwkey-agent: 223: Setting EKB key 0 to slot 14 hwkey-agent: 178: Init hweky-agent services!! luks-srv: 40: luks-srv is running!! luks-srv: 157: Init luks-srv IPC services!! platform_bootstrap_epilog: trusty bootstrap complete [0000.975] I> Welcome to Cboot [0000.977] I> Cboot Version: t186-00029e71 [0000.981] I> CPU-BL Params @ 0x175800000 [0000.985] I> 0) Base:0x00000000 Size:0x00000000 [0000.989] I> 1) Base:0x177f00000 Size:0x00100000 [0000.994] I> 2) Base:0x177e00000 Size:0x00100000 [0000.999] I> 3) Base:0x177d00000 Size:0x00100000 [0001.003] I> 4) Base:0x177c00000 Size:0x00100000 [0001.008] I> 5) Base:0x177b00000 Size:0x00100000 [0001.012] I> 6) Base:0x177800000 Size:0x00200000 [0001.017] I> 7) Base:0x177400000 Size:0x00400000 [0001.021] I> 8) Base:0x177a00000 Size:0x00100000 [0001.026] I> 9) Base:0x177300000 Size:0x00100000 [0001.030] I> 10) Base:0x176800000 Size:0x00800000 [0001.035] I> 11) Base:0x30000000 Size:0x00040000 [0001.039] I> 12) Base:0xf0000000 Size:0x00100000 [0001.044] I> 13) Base:0x30040000 Size:0x00001000 [0001.048] I> 14) Base:0x30048000 Size:0x00001000 [0001.052] I> 15) Base:0x30049000 Size:0x00001000 [0001.057] I> 16) Base:0x3004a000 Size:0x00001000 [0001.061] I> 17) Base:0x3004b000 Size:0x00001000 [0001.066] I> 18) Base:0x3004c000 Size:0x00001000 [0001.070] I> 19) Base:0x3004d000 Size:0x00001000 [0001.075] I> 20) Base:0x3004e000 Size:0x00001000 [0001.079] I> 21) Base:0x3004f000 Size:0x00001000 [0001.083] I> 22) Base:0x00000000 Size:0x00000000 [0001.088] I> 23) Base:0xf0100000 Size:0x00010000 [0001.092] I> 24) Base:0x00000000 Size:0x00000000 [0001.097] I> 25) Base:0x00000000 Size:0x00000000 [0001.101] I> 26) Base:0x00000000 Size:0x00000000 [0001.106] I> 27) Base:0x00000000 Size:0x00000000 [0001.110] I> 28) Base:0x84400000 Size:0x00400000 [0001.114] I> 29) Base:0x30000000 Size:0x00010000 [0001.119] I> 30) Base:0x178000000 Size:0x08000000 [0001.123] I> 31) Base:0x00000000 Size:0x00000000 [0001.128] I> 32) Base:0x176000000 Size:0x00600000 [0001.132] I> 33) Base:0x80000000 Size:0x70000000 [0001.137] I> 34) Base:0xf0110000 Size:0x856f0000 [0001.141] I> 35) Base:0x00000000 Size:0x00000000 [0001.146] I> 36) Base:0x00000000 Size:0x00000000 [0001.150] I> 37) Base:0x1772e0000 Size:0x00020000 [0001.155] I> 38) Base:0x84000000 Size:0x00400000 [0001.159] I> 39) Base:0x96000000 Size:0x02000000 [0001.163] I> 40) Base:0x85000000 Size:0x01200000 [0001.168] I> 41) Base:0x175800000 Size:0x00500000 [0001.172] I> 42) Base:0x00000000 Size:0x00000000 [0001.177] I> 43) Base:0x00000000 Size:0x00000000 [0001.181] GIC-SPI Target CPU: 4 [0001.185] Interrupts Init done [0001.188] calling constructors [0001.191] initializing heap [0001.194] initializing threads [0001.197] initializing timers [0001.200] creating bootstrap completion thread [0001.205] top of bootstrap2() [0001.208] CPU: ARM Cortex A57 [0001.211] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100 [0001.216] initializing platform [0001.220] I> Bl_dtb @0x85205400 [0001.223] I> gpio framework initialized [0001.228] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio' driver [0001.236] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio-aon' driver [0001.244] I> GPIO framework and drivers are initialized. [0001.249] I> Boot-device: eMMC [0001.256] I> sdmmc bdev is already initialized [0001.287] I> Found 19 partitions in SDMMC_BOOT (instance 3) [0001.305] I> Found 33 partitions in SDMMC_USER (instance 3) [0001.310] W> opt-in fuse is not set, skip fuse_burning [0001.315] I> Reserved memory at 0xfbe00000 for U-Boot relocation [0001.321] W> No valid slot number is found in scratch register [0001.327] W> Return default slot: _a [0001.336] I> A/B: bin_type (21) slot 0 [0001.340] I> Loading kernel-dtb from partition [0001.344] I> Loading partition kernel-dtb at 0x80000000 from device(0x1) [0001.361] I> Kernel_dtb @0x80000000 [0001.364] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee [0001.372] W> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0001.382] W> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0001.390] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0001.396] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xe8 [0001.404] W> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0001.414] W> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0001.422] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0001.430] I> fixed regulator driver initialized [0001.451] I> register 'maxim' power off handle [0001.456] I> virtual i2c enabled [0001.459] I> registered 'maxim,max77620' pmic [0001.464] I> tegrabl_gpio_driver_register: register 'max77620-gpio' driver [0001.474] E> failed to read label property for node 148580: 13 [0001.481] E> failed to read reg property for node 148676: 13 [0001.488] E> failed to read reg property for node 148728: 13 [0001.494] E> failed to read label property for node 148812: 13 [0001.501] E> failed to read reg property for node 148880: 13 [0001.508] E> failed to read reg property for node 148952: 13 [0001.515] I> Find /i2c@c250000's alias i2c7 [0001.519] I> Reading eeprom i2c=7 address=0x50 [0001.548] I> Device at /i2c@c250000:0x50 [0001.552] I> Reading eeprom i2c=7 address=0x57 [0001.557] E> I2C: slave not found in slaves. [0001.561] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true. [0001.568] E> I2C_DEV: Failed to send register address 0x00000000. [0001.574] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 7. [0001.584] E> eeprom: Failed to read I2C slave device [0001.589] I> Eeprom read failed 0x3526070d [0001.593] I> Find /i2c@3160000's alias i2c0 [0001.597] I> Reading eeprom i2c=0 address=0x50 [0001.602] E> I2C: slave not found in slaves. [0001.606] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0001.614] E> I2C_DEV: Failed to send register address 0x00000000. [0001.620] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 0. [0001.629] E> eeprom: Failed to read I2C slave device [0001.634] I> Eeprom read failed 0x3526070d [0001.638] I> Find /i2c@3180000's alias i2c2 [0001.642] I> Reading eeprom i2c=2 address=0x54 [0001.647] I> Enabling gpio chip_id = 2, gpio pin = 9 [0001.651] C> GPIO driver for chip_id 0x2 could not be found [0001.657] E> cam_eeprom_read: Can't get gpio driver [0001.662] I> Eeprom read failed 0x4d4d000d [0001.665] I> Reading eeprom i2c=2 address=0x57 [0001.670] I> Enabling gpio chip_id = 2, gpio pin = 9 [0001.674] C> GPIO driver for chip_id 0x2 could not be found [0001.680] E> cam_eeprom_read: Can't get gpio driver [0001.685] I> Eeprom read failed 0x4d4d000d [0001.688] I> create_pm_ids: id: 3636-0001-300-H, len: 15 [0001.694] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.717] I> regulator 'vdd-hdmi-5v0' already enabled [0001.728] I> regulator 'vdd-hdmi-5v0' already enabled [0001.733] I> hdmi cable connected [0001.737] I> setting 'vdd-pex-1v00' regulator to 1000000 micro volts [0001.745] I> setting 'vdd-1v8' regulator to 1800000 micro volts [0001.751] I> retrieved tmds range from prod_list_hdmi_soc [0001.757] E> cannot find any other nvdisp nodes [0001.766] E> I2C: Timeout while polling for bus clear. Last value 0x00000000. [0001.773] E> I2C: Failed to clear bus for instance 3. [0001.779] E> I2C: Failed to clear bus for instance 3. [0001.783] E> I2C_DEV: Failed to initialize instance 3. [0001.788] E> read_edid, invalid i2c handle [0001.795] I> hdmi_enable, starting HDMI initialisation [0001.803] I> hdmi_enable, HDMI initialisation complete [0001.827] initializing target [0001.830] calling apps_init() [0001.833] starting app kernel_boot_app [0001.855] I> found decompressor handler: lz4-legacy [0001.860] I> decompressing BMP blob ... [0001.872] I> Kernel type = Normal [0001.875] I> ########## Fixed storage boot ########## [0001.880] I> Loading kernel-bootctrl from partition [0001.884] I> Loading partition kernel-bootctrl at 0xa8000000 from device(0x1) [0001.899] W> tegrabl_get_kernel_bootctrl: magic number(0x00000000) is invalid [0001.906] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data [0001.913] W> No valid slot number is found in scratch register [0001.918] W> Return default slot: _a [0001.922] I> A/B: bin_type (24) slot 0 [0001.937] I> Boot image size read from image header: 99085 [0001.943] I> Boot image load address: 0x80400000 [0001.947] I> Loading kernel from partition [0001.951] I> Loading partition kernel at 0x80400000 from device(0x1) [0002.894] I> Validate kernel ... [0002.897] I> T18x: Authenticate kernel (bin_type 24), max size 0x4000000 [0002.905] I> Decrypt the buffer ... [0002.909] W> tegrabl_decrypt_block: fuse (0x0) is not burnt to do encryption (0x4); skip decryption. [0002.918] I> done [0002.919] I> Checking boot.img header magic ... [0002.924] I> [OK] [0002.925] I> kernel-dtb is already loaded [0002.929] I> Validate kernel-dtb ... [0002.933] I> T18x: Authenticate kernel-dtb (bin_type 21), max size 0x100000 [0002.940] I> Decrypt the buffer ... [0002.943] W> tegrabl_decrypt_block: fuse (0x0) is not burnt to do encryption (0x4); skip decryption. [0002.952] I> done [0002.954] I> Kernel hdr @0x80400000 [0002.957] I> Kernel dtb @0x80000000 [0002.960] I> decompressor handler not found [0002.964] I> Copying kernel image (626821 bytes) from 0x80400800 to 0x80600000 ... [0002.972] I> Done [0002.974] I> Move ramdisk (len: 0) from 0x8049a000 to 0x947d0000 [0002.980] I> Updated bpmp info to DTB [0002.985] I> Ramdisk: Base: 0x947d0000; Size: 0x0 [0002.990] I> Updated initrd info to DTB [0002.994] W> WARN: Fail to override "console=none" in commandline [0002.999] I> Active rootfs suffix: [0003.003] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display params [0003.010] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display params [0003.017] I> disabled_core_mask: 0xffffff0c [0003.021] W> No valid slot number is found in scratch register [0003.027] W> Return default slot: _a [0003.030] I> Active slot suffix: [0003.033] I> add_boot_slot_suffix: slot_suffix = [0003.038] I> Linux Cmdline: console=ttyS0,115200 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 video=tegrafb earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x1772e0000 gpt rootfs.slot_suffix= tegra_fbmem=0x800000@0x96085000 lut_mem=0x2008@0x96081000 usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 no_console_suspend boot.slot_suffix= boot.ratchetvalues=0.2031647.1 vpr_resize bl_prof_dataptr=0x10000@0x175840000 sdhci_tegra.en_boot_part_access=1 [0003.085] I> Updated bootarg info to DTB [0003.089] W> MAC addr invalid! [0003.092] E> Failed to get WIFI MAC address [0003.096] W> MAC addr invalid! [0003.098] E> Failed to get Bluetooth MAC address [0003.103] I> eeprom_get_mac_addr: MAC (type: 2): 48:b0:2d:3b:72:1e [0003.109] E> Found no plugin manager ids in source DT [0003.114] W> Add plugin manager ids from board info [0003.119] W> "plugin-manager" doesn't exist, creating [0003.123] W> "ids" doesn't exist, creating [0003.128] W> "connection" doesn't exist, creating [0003.132] W> "configs" doesn't exist, creating [0003.136] I> create_pm_ids: id: 3636-0001-300-H, len: 15 [0003.142] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0003.152] I> Adding plugin-manager/ids/3636-0001-300=/i2c@c250000:module@0x50 [0003.160] W> "i2c@c250000" doesn't exist, creating [0003.164] W> "module@0x50" doesn't exist, creating [0003.170] I> Adding plugin-manager/ids/3636-0001-300-H [0003.176] I> Adding plugin-manager/configs/3636-mem-type 00 [0003.182] I> Adding plugin-manager/configs/3636-power-config 00 [0003.187] I> Adding plugin-manager/configs/3636-misc-config 00 [0003.193] I> Adding plugin-manager/configs/3636-modem-config 00 [0003.199] I> Adding plugin-manager/configs/3636-touch-config 00 [0003.205] I> Adding plugin-manager/configs/3636-display-config 00 [0003.211] I> Adding plugin-manager/cvm [0003.215] W> "chip-id" doesn't exist, creating [0003.219] I> Adding plugin-manager/chip-id/A02P [0003.224] W> "odm-data" doesn't exist, creating [0003.228] I> Adding /chosen/plugin-manager/odm-data [0003.236] I> added [base:0x80000000, size:0x70000000] to /memory [0003.242] I> added [base:0xf0200000, size:0x85600000] to /memory [0003.248] I> added [base:0x175e00000, size:0x200000] to /memory [0003.254] I> added [base:0x176600000, size:0x200000] to /memory [0003.260] I> added [base:0x177000000, size:0x200000] to /memory [0003.265] I> Updated memory info to DTB [0003.269] E> add_disp_param: failed to get display params for du=1 [0003.276] W> "reset" doesn't exist, creating [0003.280] W> "pmc-reset-reason" doesn't exist, creating [0003.286] W> "pmic-reset-reason" doesn't exist, creating [0003.292] I> Adding ecid(00000001640911c11000000008028340) to DT [0003.298] I> disabled_core_mask: 0xffffff0c [0003.306] I> Add serial number:1421621061606 as DT property [0003.313] I> Plugin-manager override starting [0003.318] I> node /plugin-manager/fragement@0 matches [0003.326] I> node /plugin-manager/fragement@3 matches [0003.339] I> Disable plugin-manager status in FDT [0003.344] I> Plugin-manager override finished successfully [0003.349] I> tegrabl_load_kernel_and_dtb: Done [0003.394] I> Kernel EP: 0x80600000, DTB: 0x80000000 U-Boot 2020.04-g46e4604c78 (Jul 26 2021 - 12:10:58 -0700) SoC: tegra186 Model: NVIDIA P3636-0001 Board: NVIDIA P3636-0001 DRAM: 3.8 GiB MMC: sdhci@3400000: 1, sdhci@3460000: 0 Loading Environment from MMC... *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: Warning: ethernet@2490000 using MAC address from ROM eth0: ethernet@2490000 Hit any key to stop autoboot: 2  1  0 Card did not respond to voltage select! switch to partitions #0, OK mmc0(part 0) is current device Scanning mmc 0:1... Found /boot/extlinux/extlinux.conf Retrieving file: /boot/extlinux/extlinux.conf 858 bytes read in 28 ms (29.3 KiB/s) 1: primary kernel Retrieving file: /boot/initrd 7238344 bytes read in 199 ms (34.7 MiB/s) Retrieving file: /boot/Image 34484232 bytes read in 830 ms (39.6 MiB/s) append: console=ttyS0,115200 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 video=tegrafb earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x1772e0000 gpt rootfs.slot_suffix= tegra_fbmem=0x800000@0x96085000 lut_mem=0x2008@0x96081000 usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 no_console_suspend boot.slot_suffix= boot.ratchetvalues=0.2031647.1 vpr_resize bl_prof_dataptr=0x10000@0x175840000 sdhci_tegra.en_boot_part_access=1 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 ## Flattened Device Tree blob at 80000000 Booting using the fdt blob at 0x80000000 ERROR: reserving fdt memory region failed (addr=0 size=0) ERROR: reserving fdt memory region failed (addr=0 size=0) Using Device Tree in place at 0000000080000000, end 00000000800339dd copying carveout for /host1x@13e00000/display-hub@15200000/display@15200000... copying carveout for /host1x@13e00000/display-hub@15200000/display@15210000... copying carveout for /host1x@13e00000/display-hub@15200000/display@15220000... Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.9.253-tegra (buildbrain@mobile-u64-5497-d3000) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Mon Jul 26 12:19:28 PDT 2021 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 80, [ 0.000000] OF: fdt: - 80000000 , 70000000 [ 0.000000] OF: fdt: - f0200000 , 85600000 [ 0.000000] OF: fdt: - 175e00000 , 200000 [ 0.000000] OF: fdt: - 176600000 , 200000 [ 0.000000] OF: fdt: - 177000000 , 200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] Found tegra_fbmem: 00800000@96085000 [ 0.000000] Found lut_mem: 00002008@96081000 [ 1.381781] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 1.389337] imx219 9-0010: board setup failed [ 1.417254] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 1.424880] imx219 10-0010: board setup failed [ 11.088245] tegra-i2c 3190000.i2c: rx dma timeout txlen:28 rxlen:128 [ 11.094618] tegra-i2c 3190000.i2c: --- register dump for debugging ---- [ 11.101241] tegra-i2c 3190000.i2c: I2C_CNFG - 0x22c00 [ 11.106295] tegra-i2c 3190000.i2c: I2C_PACKET_TRANSFER_STATUS - 0x10001 [ 11.112908] tegra-i2c 3190000.i2c: I2C_FIFO_CONTROL - 0x1c [ 11.118392] tegra-i2c 3190000.i2c: I2C_FIFO_STATUS - 0x800040 [ 11.124138] tegra-i2c 3190000.i2c: I2C_INT_MASK - 0x6c [ 11.129275] tegra-i2c 3190000.i2c: I2C_INT_STATUS - 0x2 [ 11.134529] tegra-i2c 3190000.i2c: i2c transfer timed out addr: 0x50 [ 11.731653] cgroup: cgroup2: unknown option "nsdelegate" [ 12.996925] using random self ethernet address [ 13.001444] using random host ethernet address [ 13.447234] using random self ethernet address [ 13.464138] using random host ethernet address [ 14.030267] mmc1: Data CRC error [ 14.033510] sdhci: =========== REGISTER DUMP (mmc1)=========== [ 14.039356] sdhci: Sys addr: 0x00000008 | Version: 0x00000404 [ 14.045182] sdhci: Blk size: 0x00007200 | Blk cnt: 0x00000005 [ 14.051010] sdhci: Argument: 0x00000000 | Trn mode: 0x0000003b [ 14.056836] sdhci: Present: 0x01fb0008 | Host ctl: 0x00000017 [ 14.062664] sdhci: Power: 0x00000001 | Blk gap: 0x00000000 [ 14.068489] sdhci: Wake-up: 0x00000000 | Clock: 0x00000007 [ 14.074317] sdhci: Timeout: 0x00000008 | Int stat: 0x00001000 [ 14.080144] sdhci: Int enab: 0x02ff108b | Sig enab: 0x02fc108b [ 14.085970] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000 [ 14.091796] sdhci: Caps: 0x3f6cd08c | Caps_1: 0x18006f77 [ 14.097621] sdhci: Cmd: 0x0000123a | Max curr: 0x00000000 [ 14.103446] sdhci: Host ctl2: 0x0000308b [ 14.107366] sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x00000000fc100410 [ 14.113904] sdhci: =========================================== [ 20.308239] tegra-xusb 3530000.xhci: xHCI host not responding to stop endpoint command. [ 20.316253] tegra-xusb 3530000.xhci: Assuming host is dying, halting host. [ 20.323216] tegra-xusb 3530000.xhci: HC died; cleaning up [ 21.072251] tegra186-cam-rtcpu b000000.rtcpu: command: 0x04000000: response timeout [ 21.080021] ------------[ cut here ]------------ [ 21.084653] WARNING: CPU: 5 PID: 1557 at /dvs/git/dirty/git-master_linux/kernel/nvidia/drivers/platform/tegra/tegra-camera-rtcpu.c:465 tegra_camrtc_cmd_pm_suspend+0x98/0xb8 [ 21.100228] ---[ end trace 482d3acc85c116b4 ]--- [ 21.111687] ------------[ cut here ]------------ [ 21.116319] WARNING: CPU: 5 PID: 1557 at /dvs/git/dirty/git-master_linux/kernel/nvidia/drivers/platform/tegra/tegra-camera-rtcpu.c:1090 tegra_cam_rtcpu_runtime_suspend+0x70/0xa8 [ 21.132315] ---[ end trace 482d3acc85c116b5 ]--- [ 35.028221] INFO: rcu_preempt self-detected stall on CPU [ 35.033561] 0-...: (1 GPs behind) idle=55f/140000000000002/0 softirq=3119/3121 fqs=2049 [ 35.041729] (t=5250 jiffies g=84 c=83 q=56471) [ 35.048216] INFO: rcu_sched detected stalls on CPUs/tasks: [ 35.053725] 0-...: (1 GPs behind) idle=55f/140000000000002/0 softirq=3119/3121 fqs=2058 [ 35.061894] (detected by 4, t=5259 jiffies, g=-54, c=-55, q=49) [ 60.172246] NMI watchdog: BUG: soft lockup - CPU#0 stuck for 23s! [nvphsd_setup.sh:5308] [ 60.180460] Kernel panic - not syncing: softlockup: hung tasks [ 60.186287] CPU: 0 PID: 5308 Comm: nvphsd_setup.sh Tainted: G W L 4.9.253-tegra #1 [ 60.194798] Hardware name: lanai-3636 (DT) [ 60.198889] Call trace: [ 60.201334] [] dump_backtrace+0x0/0x198 [ 60.206728] [] show_stack+0x24/0x30 [ 60.211776] [] dump_stack+0xa0/0xc4 [ 60.216824] [] panic+0x12c/0x2a8 [ 60.221612] [] watchdog_unpark_threads+0x0/0x98 [ 60.227698] [] __hrtimer_run_queues+0xd8/0x360 [ 60.233698] [] hrtimer_interrupt+0xa8/0x1e0 [ 60.239438] [] tegra186_timer_isr+0x34/0x48 [ 60.245178] [] __handle_irq_event_percpu+0x68/0x288 [ 60.251610] [] handle_irq_event_percpu+0x28/0x60 [ 60.257781] [] handle_irq_event+0x50/0x80 [ 60.263346] [] handle_fasteoi_irq+0xd4/0x1c0 [ 60.269171] [] generic_handle_irq+0x34/0x50 [ 60.274908] [] __handle_domain_irq+0x68/0xc0 [ 60.280733] [] gic_handle_irq+0x5c/0xb0 [ 60.286124] [] el1_irq+0xe8/0x194 [ 60.290997] [] irq_exit+0xd0/0x118 [ 60.295954] [] __handle_domain_irq+0x6c/0xc0 [ 60.301778] [] gic_handle_irq+0x5c/0xb0 [ 60.307167] [] el0_irq_naked+0x54/0x60 [ 60.312473] SMP: stopping secondary CPUs [ 60.316515] Kernel Offset: disabled [ 60.319997] Memory Limit: none [ 60.323046] trusty-log panic notifier - trusty version Built: 12:20:14 Jul 26 2021 [ 60.338669] Rebooting in 5 seconds.. [0000.145] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-c368a720) [0000.154] I> Boot-device: eMMC [0000.161] I> sdmmc bdev is already initialized [0000.166] I> pmic: reset reason (nverc) : 0x0 [0000.199] I> Found 19 partitions in SDMMC_BOOT (instance 3) [0000.219] I> Found 33 partitions in SDMMC_USER (instance 3) [0000.224] W> No valid slot number is found in scratch register [0000.230] W> Return default slot: _a [0000.234] I> A/B: bin_type (16) slot 0 [0000.237] I> Loading partition bpmp-fw at 0xd7800000 [0000.242] I> Reading two headers - addr:0xd7800000 blocks:1 [0000.248] I> Addr: 0xd7800000, start-block: 29417480, num_blocks: 1 [0000.273] I> Binary(16) of size 534416 is loaded @ 0xd7800000 [0000.278] W> No valid slot number is found in scratch register [0000.284] W> Return default slot: _a [0000.288] I> A/B: bin_type (17) slot 0 [0000.291] I> Loading partition bpmp-fw-dtb at 0xd79f0000 [0000.296] I> Reading two headers - addr:0xd79f0000 blocks:1 [0000.302] I> Addr: 0xd79f0000, start-block: 29419896, num_blocks: 1 [0000.321] I> Binary(17) of size 113248 is loaded @ 0xd79e4400 [0000.349] I> Loading SCE-FW ... [0000.352] W> No valid slot number is found in scratch register [0000.358] W> Return default slot: _a [0000.361] I> A/B: bin_type (12) slot 0 [0000.365] I> Loading partition sce-fw at 0xd7300000 [0000.369] I> Reading two headers - addr:0xd7300000 blocks:1 [0000.375] I> Addr: 0xd7300000, start-block: 29423992, num_blocks: 1 [0000.394] I> Binary(12) of size 125632 is loaded @ 0xd7300000 [0000.400] I> Init SCE [0000.402] I> Loading APE-FW ... [0000.405] W> No valid slot number is found in scratch register [0000.411] W> Return default slot: _a [0000.414] I> A/B: bin_type (11) slot 0 [0000.418] I> Loading partition adsp-fw at 0xd7400000 [0000.423] I> Reading two headers - addr:0xd7400000 blocks:1 [0000.428] I> Addr: 0xd7400000, start-block: 29401096, num_blocks: 1 [0000.447] I> Binary(11) of size 77216 is loaded @ 0xd7400000 [0000.453] I> Copy BTCM section [0000.456] W> No valid slot number is found in scratch register [0000.461] W> Return default slot: _a [0000.465] I> A/B: bin_type (13) slot 0 [0000.468] I> Loading partition cpu-bootloader at 0x96000000 [0000.474] I> Reading two headers - addr:0x96000000 blocks:1 [0000.479] I> Addr: 0x96000000, start-block: 29380616, num_blocks: 1 [0000.500] I> Binary(13) of size 308800 is loaded @ 0x96000000 [0000.506] W> No valid slot number is found in scratch register [0000.512] W> Return default slot: _a [0000.515] I> A/B: bin_type (20) slot 0 [0000.519] I> Loading partition bootloader-dtb at 0x85205400 [0000.524] I> Reading two headers - addr:0x85205400 blocks:1 [0000.530] I> Addr: 0x85205400, start-block: 29382664, num_blocks: 1 [0000.549] I> Binary(20) of size 191040 is loaded @ 0x85205400 [0000.555] W> No valid slot number is found in scratch register [0000.560] W> Return default slot: _a [0000.564] I> A/B: bin_type (14) slot 0 [0000.567] I> Loading partition secure-os at 0x85305600 [0000.572] I> Reading two headers - addr:0x85305600 blocks:1 [0000.578] I> Addr: 0x85305600, start-block: 29384712, num_blocks: 1 [0000.600] I> Binary(14) of size 402864 is loaded @ 0x85305600 [0000.608] I> TOS boot-params @ 0x85000000 [0000.612] I> TOS params prepared [0000.615] I> Loading EKS ... [0000.617] I> A/B: bin_type (15) slot 0 [0000.621] I> Loading partition eks at 0x85905800 [0000.625] I> Reading two headers - addr:0x85905800 blocks:1 [0000.631] I> Addr: 0x85905800, start-block: 29397000, num_blocks: 1 [0000.650] I> Binary(15) of size 1040 is loaded @ 0x85905800 [0000.655] I> EKB detected (length: 0x400) @ 0x85905800 [0000.660] I> Copied encrypted keys [0000.664] I> boot profiler @ 0x175844000 [0000.668] I> boot profiler for TOS @ 0x175844000 [0000.673] I> Unhalting SCE [0000.675] I> Primary Memory Start:80000000 Size:70000000 [0000.680] I> Extended Memory Start:f0110000 Size:856f0000 [0000.687] I> MB2(TBoot-BPMP) done NOTICE: BL31: v1.3(release):b5eeb33f7 NOTICE: BL31: Built : 12:15:17, Jul 26 2021 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! hwkey-agent: 41: hwkey-agent is running!! hwkey-agent: 315: key_mgnt_processing ....... hwkey-agent: 223: Setting EKB key 0 to slot 14 hwkey-agent: 178: Init hweky-agent services!! luks-srv: 40: luks-srv is running!! luks-srv: 157: Init luks-srv IPC services!! platform_bootstrap_epilog: trusty bootstrap complete [0000.909] I> Welcome to Cboot [0000.912] I> Cboot Version: t186-00029e71 [0000.916] I> CPU-BL Params @ 0x175800000 [0000.920] I> 0) Base:0x00000000 Size:0x00000000 [0000.924] I> 1) Base:0x177f00000 Size:0x00100000 [0000.929] I> 2) Base:0x177e00000 Size:0x00100000 [0000.933] I> 3) Base:0x177d00000 Size:0x00100000 [0000.938] I> 4) Base:0x177c00000 Size:0x00100000 [0000.942] I> 5) Base:0x177b00000 Size:0x00100000 [0000.947] I> 6) Base:0x177800000 Size:0x00200000 [0000.951] I> 7) Base:0x177400000 Size:0x00400000 [0000.956] I> 8) Base:0x177a00000 Size:0x00100000 [0000.960] I> 9) Base:0x177300000 Size:0x00100000 [0000.965] I> 10) Base:0x176800000 Size:0x00800000 [0000.969] I> 11) Base:0x30000000 Size:0x00040000 [0000.974] I> 12) Base:0xf0000000 Size:0x00100000 [0000.978] I> 13) Base:0x30040000 Size:0x00001000 [0000.983] I> 14) Base:0x30048000 Size:0x00001000 [0000.987] I> 15) Base:0x30049000 Size:0x00001000 [0000.992] I> 16) Base:0x3004a000 Size:0x00001000 [0000.996] I> 17) Base:0x3004b000 Size:0x00001000 [0001.000] I> 18) Base:0x3004c000 Size:0x00001000 [0001.005] I> 19) Base:0x3004d000 Size:0x00001000 [0001.009] I> 20) Base:0x3004e000 Size:0x00001000 [0001.014] I> 21) Base:0x3004f000 Size:0x00001000 [0001.018] I> 22) Base:0x00000000 Size:0x00000000 [0001.023] I> 23) Base:0xf0100000 Size:0x00010000 [0001.027] I> 24) Base:0x00000000 Size:0x00000000 [0001.031] I> 25) Base:0x00000000 Size:0x00000000 [0001.036] I> 26) Base:0x00000000 Size:0x00000000 [0001.040] I> 27) Base:0x00000000 Size:0x00000000 [0001.045] I> 28) Base:0x84400000 Size:0x00400000 [0001.049] I> 29) Base:0x30000000 Size:0x00010000 [0001.054] I> 30) Base:0x178000000 Size:0x08000000 [0001.058] I> 31) Base:0x00000000 Size:0x00000000 [0001.063] I> 32) Base:0x176000000 Size:0x00600000 [0001.067] I> 33) Base:0x80000000 Size:0x70000000 [0001.071] I> 34) Base:0xf0110000 Size:0x856f0000 [0001.076] I> 35) Base:0x00000000 Size:0x00000000 [0001.080] I> 36) Base:0x00000000 Size:0x00000000 [0001.085] I> 37) Base:0x1772e0000 Size:0x00020000 [0001.089] I> 38) Base:0x84000000 Size:0x00400000 [0001.094] I> 39) Base:0x96000000 Size:0x02000000 [0001.098] I> 40) Base:0x85000000 Size:0x01200000 [0001.103] I> 41) Base:0x175800000 Size:0x00500000 [0001.107] I> 42) Base:0x00000000 Size:0x00000000 [0001.112] I> 43) Base:0x00000000 Size:0x00000000 [0001.116] GIC-SPI Target CPU: 4 [0001.119] Interrupts Init done [0001.123] calling constructors [0001.126] initializing heap [0001.128] initializing threads [0001.132] initializing timers [0001.135] creating bootstrap completion thread [0001.140] top of bootstrap2() [0001.143] CPU: ARM Cortex A57 [0001.146] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100 [0001.151] initializing platform [0001.154] I> Bl_dtb @0x85205400 [0001.157] I> gpio framework initialized [0001.162] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio' driver [0001.171] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio-aon' driver [0001.179] I> GPIO framework and drivers are initialized. [0001.184] I> Boot-device: eMMC [0001.191] I> sdmmc bdev is already initialized [0001.222] I> Found 19 partitions in SDMMC_BOOT (instance 3) [0001.239] I> Found 33 partitions in SDMMC_USER (instance 3) [0001.245] W> opt-in fuse is not set, skip fuse_burning [0001.250] I> Reserved memory at 0xfbe00000 for U-Boot relocation [0001.256] W> No valid slot number is found in scratch register [0001.261] W> Return default slot: _a [0001.271] I> A/B: bin_type (21) slot 0 [0001.274] I> Loading kernel-dtb from partition [0001.279] I> Loading partition kernel-dtb at 0x80000000 from device(0x1) [0001.296] I> Kernel_dtb @0x80000000 [0001.299] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee [0001.307] W> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0001.317] W> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0001.325] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0001.331] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xe8 [0001.338] W> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0001.348] W> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0001.356] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0001.364] I> fixed regulator driver initialized [0001.386] I> register 'maxim' power off handle [0001.391] I> virtual i2c enabled [0001.394] I> registered 'maxim,max77620' pmic [0001.398] I> tegrabl_gpio_driver_register: register 'max77620-gpio' driver [0001.408] E> failed to read label property for node 148580: 13 [0001.415] E> failed to read reg property for node 148676: 13 [0001.422] E> failed to read reg property for node 148728: 13 [0001.429] E> failed to read label property for node 148812: 13 [0001.436] E> failed to read reg property for node 148880: 13 [0001.442] E> failed to read reg property for node 148952: 13 [0001.450] I> Find /i2c@c250000's alias i2c7 [0001.454] I> Reading eeprom i2c=7 address=0x50 [0001.483] I> Device at /i2c@c250000:0x50 [0001.487] I> Reading eeprom i2c=7 address=0x57 [0001.491] E> I2C: slave not found in slaves. [0001.495] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true. [0001.503] E> I2C_DEV: Failed to send register address 0x00000000. [0001.509] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 7. [0001.518] E> eeprom: Failed to read I2C slave device [0001.523] I> Eeprom read failed 0x3526070d [0001.528] I> Find /i2c@3160000's alias i2c0 [0001.532] I> Reading eeprom i2c=0 address=0x50 [0001.537] E> I2C: slave not found in slaves. [0001.541] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0001.548] E> I2C_DEV: Failed to send register address 0x00000000. [0001.554] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 0. [0001.564] E> eeprom: Failed to read I2C slave device [0001.568] I> Eeprom read failed 0x3526070d [0001.573] I> Find /i2c@3180000's alias i2c2 [0001.577] I> Reading eeprom i2c=2 address=0x54 [0001.581] I> Enabling gpio chip_id = 2, gpio pin = 9 [0001.586] C> GPIO driver for chip_id 0x2 could not be found [0001.591] E> cam_eeprom_read: Can't get gpio driver [0001.596] I> Eeprom read failed 0x4d4d000d [0001.600] I> Reading eeprom i2c=2 address=0x57 [0001.604] I> Enabling gpio chip_id = 2, gpio pin = 9 [0001.609] C> GPIO driver for chip_id 0x2 could not be found [0001.614] E> cam_eeprom_read: Can't get gpio driver [0001.619] I> Eeprom read failed 0x4d4d000d [0001.623] I> create_pm_ids: id: 3636-0001-300-H, len: 15 [0001.628] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.651] I> regulator 'vdd-hdmi-5v0' already enabled [0001.662] I> regulator 'vdd-hdmi-5v0' already enabled [0001.667] I> hdmi cable connected [0001.672] I> setting 'vdd-pex-1v00' regulator to 1000000 micro volts [0001.680] I> setting 'vdd-1v8' regulator to 1800000 micro volts [0001.685] I> retrieved tmds range from prod_list_hdmi_soc [0001.692] E> cannot find any other nvdisp nodes [0001.701] E> I2C: Timeout while polling for bus clear. Last value 0x00000000. [0001.708] E> I2C: Failed to clear bus for instance 3. [0001.713] E> I2C: Failed to clear bus for instance 3. [0001.718] E> I2C_DEV: Failed to initialize instance 3. [0001.723] E> read_edid, invalid i2c handle [0001.730] I> hdmi_enable, starting HDMI initialisation [0001.737] I> hdmi_enable, HDMI initialisation complete [0001.750] initializing target [0001.754] calling apps_init() [0001.757] starting app kernel_boot_app [0001.779] I> found decompressor handler: lz4-legacy [0001.784] I> decompressing BMP blob ... [0001.795] I> Kernel type = Normal [0001.798] I> ########## Fixed storage boot ########## [0001.803] I> Loading kernel-bootctrl from partition [0001.808] I> Loading partition kernel-bootctrl at 0xa8000000 from device(0x1) [0001.822] W> tegrabl_get_kernel_bootctrl: magic number(0x00000000) is invalid [0001.829] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data [0001.836] W> No valid slot number is found in scratch register [0001.842] W> Return default slot: _a [0001.845] I> A/B: bin_type (24) slot 0 [0001.861] I> Boot image size read from image header: 99085 [0001.866] I> Boot image load address: 0x80400000 [0001.870] I> Loading kernel from partition [0001.874] I> Loading partition kernel at 0x80400000 from device(0x1) [0002.817] I> Validate kernel ... [0002.820] I> T18x: Authenticate kernel (bin_type 24), max size 0x4000000 [0002.828] I> Decrypt the buffer ... [0002.832] W> tegrabl_decrypt_block: fuse (0x0) is not burnt to do encryption (0x4); skip decryption. [0002.840] I> done [0002.842] I> Checking boot.img header magic ... [0002.846] I> [OK] [0002.848] I> kernel-dtb is already loaded [0002.852] I> Validate kernel-dtb ... [0002.855] I> T18x: Authenticate kernel-dtb (bin_type 21), max size 0x100000 [0002.863] I> Decrypt the buffer ... [0002.866] W> tegrabl_decrypt_block: fuse (0x0) is not burnt to do encryption (0x4); skip decryption. [0002.875] I> done [0002.877] I> Kernel hdr @0x80400000 [0002.880] I> Kernel dtb @0x80000000 [0002.883] I> decompressor handler not found [0002.887] I> Copying kernel image (626821 bytes) from 0x80400800 to 0x80600000 ... [0002.895] I> Done [0002.897] I> Move ramdisk (len: 0) from 0x8049a000 to 0x947d0000 [0002.903] I> Updated bpmp info to DTB [0002.908] I> Ramdisk: Base: 0x947d0000; Size: 0x0 [0002.913] I> Updated initrd info to DTB [0002.916] W> WARN: Fail to override "console=none" in commandline [0002.922] I> Active rootfs suffix: [0002.926] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display params [0002.933] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display params [0002.940] I> disabled_core_mask: 0xffffff0c [0002.944] W> No valid slot number is found in scratch register [0002.950] W> Return default slot: _a [0002.953] I> Active slot suffix: [0002.956] I> add_boot_slot_suffix: slot_suffix = [0002.961] I> Linux Cmdline: console=ttyS0,115200 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 video=tegrafb earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x1772e0000 gpt rootfs.slot_suffix= tegra_fbmem=0x800000@0x96085000 lut_mem=0x2008@0x96081000 usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 no_console_suspend boot.slot_suffix= boot.ratchetvalues=0.2031647.1 vpr_resize bl_prof_dataptr=0x10000@0x175840000 sdhci_tegra.en_boot_part_access=1 [0003.008] I> Updated bootarg info to DTB [0003.012] W> MAC addr invalid! [0003.015] E> Failed to get WIFI MAC address [0003.019] W> MAC addr invalid! [0003.021] E> Failed to get Bluetooth MAC address [0003.026] I> eeprom_get_mac_addr: MAC (type: 2): 48:b0:2d:3b:72:1e [0003.032] E> Found no plugin manager ids in source DT [0003.037] W> Add plugin manager ids from board info [0003.042] W> "plugin-manager" doesn't exist, creating [0003.046] W> "ids" doesn't exist, creating [0003.050] W> "connection" doesn't exist, creating [0003.055] W> "configs" doesn't exist, creating [0003.059] I> create_pm_ids: id: 3636-0001-300-H, len: 15 [0003.064] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0003.075] I> Adding plugin-manager/ids/3636-0001-300=/i2c@c250000:module@0x50 [0003.083] W> "i2c@c250000" doesn't exist, creating [0003.087] W> "module@0x50" doesn't exist, creating [0003.093] I> Adding plugin-manager/ids/3636-0001-300-H [0003.099] I> Adding plugin-manager/configs/3636-mem-type 00 [0003.105] I> Adding plugin-manager/configs/3636-power-config 00 [0003.110] I> Adding plugin-manager/configs/3636-misc-config 00 [0003.116] I> Adding plugin-manager/configs/3636-modem-config 00 [0003.122] I> Adding plugin-manager/configs/3636-touch-config 00 [0003.128] I> Adding plugin-manager/configs/3636-display-config 00 [0003.134] I> Adding plugin-manager/cvm [0003.138] W> "chip-id" doesn't exist, creating [0003.142] I> Adding plugin-manager/chip-id/A02P [0003.147] W> "odm-data" doesn't exist, creating [0003.151] I> Adding /chosen/plugin-manager/odm-data [0003.159] I> added [base:0x80000000, size:0x70000000] to /memory [0003.165] I> added [base:0xf0200000, size:0x85600000] to /memory [0003.171] I> added [base:0x175e00000, size:0x200000] to /memory [0003.177] I> added [base:0x176600000, size:0x200000] to /memory [0003.183] I> added [base:0x177000000, size:0x200000] to /memory [0003.188] I> Updated memory info to DTB [0003.192] E> add_disp_param: failed to get display params for du=1 [0003.199] W> "reset" doesn't exist, creating [0003.203] W> "pmc-reset-reason" doesn't exist, creating [0003.209] W> "pmic-reset-reason" doesn't exist, creating [0003.215] I> Adding ecid(00000001640911c11000000008028340) to DT [0003.221] I> disabled_core_mask: 0xffffff0c [0003.229] I> Add serial number:1421621061606 as DT property [0003.236] I> Plugin-manager override starting [0003.242] I> node /plugin-manager/fragement@0 matches [0003.249] I> node /plugin-manager/fragement@3 matches [0003.262] I> Disable plugin-manager status in FDT [0003.267] I> Plugin-manager override finished successfully [0003.272] I> tegrabl_load_kernel_and_dtb: Done [0003.317] I> Kernel EP: 0x80600000, DTB: 0x80000000 U-Boot 2020.04-g46e4604c78 (Jul 26 2021 - 12:10:58 -0700) SoC: tegra186 Model: NVIDIA P3636-0001 Board: NVIDIA P3636-0001 DRAM: 3.8 GiB MMC: sdhci@3400000: 1, sdhci@3460000: 0 Loading Environment from MMC... *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: Warning: ethernet@2490000 using MAC address from ROM eth0: ethernet@2490000 Hit any key to stop autoboot: 2  1  0 Card did not respond to voltage select! switch to partitions #0, OK mmc0(part 0) is current device Scanning mmc 0:1... Found /boot/extlinux/extlinux.conf Retrieving file: /boot/extlinux/extlinux.conf 852 bytes read in 29 ms (28.3 KiB/s) 1: primary kernel Retrieving file: /boot/initrd 7238344 bytes read in 199 ms (34.7 MiB/s) Retrieving file: /boot/Image 34484232 bytes read in 830 ms (39.6 MiB/s) append: console=ttyS0,115200 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 video=tegrafb earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x1772e0000 gpt rootfs.slot_suffix= tegra_fbmem=0x800000@0x96085000 lut_mem=0x2008@0x96081000 usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 no_console_suspend boot.slot_suffix= boot.ratchetvalues=0.2031647.1 vpr_resize bl_prof_dataptr=0x10000@0x175840000 sdhci_tegra.en_boot_part_access=1 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 ## Flattened Device Tree blob at 80000000 Booting using the fdt blob at 0x80000000 ERROR: reserving fdt memory region failed (addr=0 size=0) ERROR: reserving fdt memory region failed (addr=0 size=0) Using Device Tree in place at 0000000080000000, end 00000000800339dd copying carveout for /host1x@13e00000/display-hub@15200000/display@15200000... copying carveout for /host1x@13e00000/display-hub@15200000/display@15210000... copying carveout for /host1x@13e00000/display-hub@15200000/display@15220000... Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.9.253-tegra (buildbrain@mobile-u64-5497-d3000) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Mon Jul 26 12:19:28 PDT 2021 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 80, [ 0.000000] OF: fdt: - 80000000 , 70000000 [ 0.000000] OF: fdt: - f0200000 , 85600000 [ 0.000000] OF: fdt: - 175e00000 , 200000 [ 0.000000] OF: fdt: - 176600000 , 200000 [ 0.000000] OF: fdt: - 177000000 , 200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] Found tegra_fbmem: 00800000@96085000 [ 0.000000] Found lut_mem: 00002008@96081000 [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fc000000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 24 pages/cpu s57624 r8192 d32488 u98304 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 988725 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 video=tegrafb earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x1772e0000 gpt rootfs.slot_suffix= tegra_fbmem=0x800000@0x96085000 lut_mem=0x2008@0x96081000 usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 no_console_suspend boot.slot_suffix= boot.ratchetvalues=0.2031647.1 vpr_resize bl_prof_dataptr=0x10000@0x175840000 sdhci_tegra.en_boot_part_access=1 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 29776(90%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Memory: 3147920K/4018164K available (15358K kernel code, 2956K rwdata, 6692K rodata, 8640K init, 612K bss, 116580K reserved, 753664K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f80000 ( 15360 KB) [ 0.000000] .rodata : 0xffffff8008f80000 - 0xffffff8009610000 ( 6720 KB) [ 0.000000] .init : 0xffffff8009610000 - 0xffffff8009e80000 ( 8640 KB) [ 0.000000] .data : 0xffffff8009e80000 - 0xffffff800a163008 ( 2957 KB) [ 0.000000] .bss : 0xffffff800a163008 - 0xffffff800a1fc0b4 ( 613 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf03dc8000 ( 61 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc0f7200000 ( 3954 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000003] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.009334] Console: colour dummy device 80x25 [ 0.014005] console [tty0] enabled [ 0.017567] bootconsole [uart8250] disabled [ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.9.253-tegra (buildbrain@mobile-u64-5497-d3000) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Mon Jul 26 12:19:28 PDT 2021 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 80, [ 0.000000] OF: fdt: - 80000000 , 70000000 [ 0.000000] OF: fdt: - f0200000 , 85600000 [ 0.000000] OF: fdt: - 175e00000 , 200000 [ 0.000000] OF: fdt: - 176600000 , 200000 [ 0.000000] OF: fdt: - 177000000 , 200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] Found tegra_fbmem: 00800000@96085000 [ 0.000000] Found lut_mem: 00002008@96081000 [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fc000000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 24 pages/cpu s57624 r8192 d32488 u98304 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 988725 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 video=tegrafb earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x1772e0000 gpt rootfs.slot_suffix= tegra_fbmem=0x800000@0x96085000 lut_mem=0x2008@0x96081000 usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 no_console_suspend boot.slot_suffix= boot.ratchetvalues=0.2031647.1 vpr_resize bl_prof_dataptr=0x10000@0x175840000 sdhci_tegra.en_boot_part_access=1 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 29776(90%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Memory: 3147920K/4018164K available (15358K kernel code, 2956K rwdata, 6692K rodata, 8640K init, 612K bss, 116580K reserved, 753664K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f80000 ( 15360 KB) [ 0.000000] .rodata : 0xffffff8008f80000 - 0xffffff8009610000 ( 6720 KB) [ 0.000000] .init : 0xffffff8009610000 - 0xffffff8009e80000 ( 8640 KB) [ 0.000000] .data : 0xffffff8009e80000 - 0xffffff800a163008 ( 2957 KB) [ 0.000000] .bss : 0xffffff800a163008 - 0xffffff800a1fc0b4 ( 613 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf03dc8000 ( 61 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc0f7200000 ( 3954 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000003] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.009334] Console: colour dummy device 80x25 [ 0.014005] console [tty0] enabled [ 0.017567] bootconsole [uart8250] disabled [ 0.021951] kmemleak: Kernel memory leak detector disabled [ 0.021965] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.021979] pid_max: default: 32768 minimum: 301 [ 0.022289] Security Framework initialized [ 0.022449] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.022458] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.023029] ftrace: allocating 47077 entries in 184 pages [ 0.146733] sched-energy: Sched-energy-costs installed from DT [ 0.146753] ASID allocator initialised with 65536 entries [ 0.181285] tegra-id: chipid=21817. [ 0.181299] tegra-id: opt_subrevision=1. [ 0.181321] Tegra Revision: A02p SKU: 0xdc CPU Process: 0 SoC Process: 0 [ 0.181334] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/lanai/kernel-dts/tegra186-p3636-0001-p3509-0000-a01.dts [ 0.181349] DTB Build time: [ 0.231019] CPU1: Booted secondary processor [4e0f0030] [ 0.262376] CPU2: Booted secondary processor [4e0f0030] [ 0.293400] CPU3: Booted secondary processor [411fd073] [ 0.325366] CPU4: Booted secondary processor [411fd073] [ 0.357357] CPU5: Booted secondary processor [411fd073] [ 0.357413] Brought up 6 CPUs [ 0.357447] SMP: Total of 6 processors activated. [ 0.357459] CPU features: detected feature: 32-bit EL0 Support [ 0.359848] CPU: All CPU(s) started at EL2 [ 0.360026] alternatives: patching kernel code [ 0.362405] devtmpfs: initialized [ 0.385257] Initilizing CustomIPI irq domain [ 0.385432] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.385455] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.393950] pinctrl core: initialized pinctrl subsystem [ 0.394207] OS set in device tree is not L4T. [ 0.394381] regulator-dummy: no parameters [ 0.394526] Initializing plugin-manager [ 0.394588] Plugin module not found [ 0.394629] Plugin-manager status disabled [ 0.395717] NET: Registered protocol family 16 [ 0.396715] pstore: using zlib compression [ 0.396985] console [pstore-1] enabled [ 0.396996] pstore: Registered ramoops as persistent store backend [ 0.397009] ramoops: attached 0x200000@0x175880000, ecc: 0/0 [ 0.409411] cpuidle: using governor menu [ 0.410354] bpmp: waiting for handshake [ 0.410367] bpmp: handshake completed [ 0.410394] bpmp: synchronizing channels [ 0.410406] bpmp: channels synchronized [ 0.410417] bpmp: mail init ok [ 0.411853] arm-smmu 12000000.iommu: probing hardware configuration... [ 0.411871] arm-smmu 12000000.iommu: SMMUv2 with: [ 0.411884] arm-smmu 12000000.iommu: stage 1 translation [ 0.411896] arm-smmu 12000000.iommu: stage 2 translation [ 0.411907] arm-smmu 12000000.iommu: nested translation [ 0.411922] arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80 [ 0.411940] arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)! [ 0.411958] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 0.411971] arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA [ 0.411983] arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA [ 0.413790] vdso: 2 pages (1 code @ ffffff8008f87000, 1 data @ ffffff8009e84000) [ 0.413820] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.416972] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.417997] Registering BPMP clocks... [ 0.418075] tegra_bpmp_clk_init: clock init ok (638 clks) [ 0.418537] Serial: AMBA PL011 UART driver [ 0.419436] tegra_powergate_init: DONE [ 0.419452] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/lanai/kernel-dts/tegra186-p3636-0001-p3509-0000-a01.dts [ 0.419477] DTB Build time: [ 0.420751] Tegra reboot handler registered. [ 0.421982] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.422063] tegra-pmc: get_secure_pmc_setting: done secure_pmc=0 [ 0.422086] tegra-pmc: ### PMC reset source: TEGRA_SOFTWARE_RESET [ 0.422098] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L1 [ 0.422110] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.422274] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.422300] tegra-pmc c360000.pmc: IO padctrl driver initialized [ 0.422587] iommu: Adding device 3460000.sdhci to group 0 [ 0.423790] iommu: Adding device 3160000.i2c to group 1 [ 0.424202] iommu: Adding device c240000.i2c to group 2 [ 0.424534] iommu: Adding device 3180000.i2c to group 3 [ 0.424839] iommu: Adding device 3190000.i2c to group 4 [ 0.425247] iommu: Adding device 31b0000.i2c to group 5 [ 0.425579] iommu: Adding device 31c0000.i2c to group 6 [ 0.425884] iommu: Adding device c250000.i2c to group 7 [ 0.426172] iommu: Adding device 31e0000.i2c to group 8 [ 0.427638] iommu: Adding device 3210000.spi to group 9 [ 0.427943] iommu: Adding device c260000.spi to group 10 [ 0.428601] iommu: Adding device 3100000.serial to group 11 [ 0.428906] iommu: Adding device 3110000.serial to group 12 [ 0.429201] iommu: Adding device 3130000.serial to group 13 [ 0.430366] iommu: Adding device 2490000.ether_qos to group 14 [ 0.430389] arm-smmu: forcing sodev map for 2490000.ether_qos [ 0.431214] iommu: Adding device b000000.rtcpu to group 15 [ 0.432887] iommu: Adding device 13e10000.host1x to group 16 [ 0.433184] iommu: Adding device 13e10000.host1x:ctx0 to group 17 [ 0.433487] iommu: Adding device 13e10000.host1x:ctx1 to group 18 [ 0.433791] iommu: Adding device 13e10000.host1x:ctx2 to group 19 [ 0.434073] iommu: Adding device 13e10000.host1x:ctx3 to group 20 [ 0.434361] iommu: Adding device 13e10000.host1x:ctx4 to group 21 [ 0.434660] iommu: Adding device 13e10000.host1x:ctx5 to group 22 [ 0.434941] iommu: Adding device 13e10000.host1x:ctx6 to group 23 [ 0.435219] iommu: Adding device 13e10000.host1x:ctx7 to group 24 [ 0.435643] iommu: Adding device 150c0000.nvcsi to group 25 [ 0.436214] iommu: Adding device 15700000.vi to group 26 [ 0.436520] iommu: Adding device 15600000.isp to group 27 [ 0.436727] iommu: Adding device 15200000.dc_common to group 28 [ 0.436777] platform 15200000.dc_common: OF IOVA linear map 0x96085000 size (0x800000) [ 0.436832] platform 15200000.dc_common: OF IOVA linear map 0x96081000 size (0x2008) [ 0.437290] iommu: Adding device 15200000.nvdisplay to group 29 [ 0.437632] iommu: Adding device 15210000.nvdisplay to group 30 [ 0.437948] iommu: Adding device 15340000.vic to group 31 [ 0.438161] iommu: Adding device 154c0000.nvenc to group 32 [ 0.438363] iommu: Adding device 15480000.nvdec to group 33 [ 0.438659] iommu: Adding device 15380000.nvjpg to group 34 [ 0.438853] iommu: Adding device 15500000.tsec to group 35 [ 0.439054] iommu: Adding device 15100000.tsecb to group 36 [ 0.439945] iommu: Adding device 15810000.se to group 37 [ 0.440160] iommu: Adding device 15820000.se to group 38 [ 0.440359] iommu: Adding device 15830000.se to group 39 [ 0.440556] iommu: Adding device 15840000.se to group 40 [ 0.441323] iommu: Adding device smmu_test to group 41 [ 0.441922] mc: mapped MMIO address: 0xffffff800a7b0000 -> 0x2c10000 [ 0.441946] mc: mapped MMIO address: 0xffffff800a7d0000 -> 0x2c20000 [ 0.441968] mc: mapped MMIO address: 0xffffff800b110000 -> 0x2c30000 [ 0.441988] mc: mapped MMIO address: 0xffffff800b130000 -> 0x2c40000 [ 0.442008] mc: mapped MMIO address: 0xffffff800b150000 -> 0x2c50000 [ 0.442025] nv-tegra-mc 2c10000.mc: No mssnvlink node [ 0.442043] mc-err: mcerr ops are set to t18x [ 0.442190] dram-ecc: DRAM ECC disabled-MC_ECC_CONTROL:0x0000000c [ 0.442929] iommu: Adding device 3530000.xhci to group 42 [ 0.442952] arm-smmu: forcing sodev map for 3530000.xhci [ 0.443378] iommu: Adding device 3550000.xudc to group 43 [ 0.443401] arm-smmu: forcing sodev map for 3550000.xudc [ 0.443931] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_83 = 0x10a [ 0.443950] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3 [ 0.443965] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256 [ 0.444575] iommu: Adding device 17000000.gp10b to group 44 [ 0.445538] tegra-reset 5000000.clock: registered 193 resets. [ 0.447415] iommu: Adding device d000000.bpmp to group 45 [ 0.447635] bpmp: ping status is 0 [ 0.447719] bpmp d000000.bpmp: firmware tag is 91572a54614f84d0fd0c270beec2c56f [ 0.449356] bpmp d000000.bpmp: probe ok [ 0.451873] iommu: Adding device 2600000.dma to group 46 [ 0.452672] GPIO line 424 (camera-control-output-low) hogged as output/low [ 0.452717] GPIO line 427 (camera-control-output-low) hogged as output/low [ 0.452771] GPIO line 408 (w-disable1) hogged as output/high [ 0.452817] GPIO line 410 (w-disable2) hogged as output/high [ 0.452993] gpiochip_setup_dev: registered GPIOs 320 to 511 on device: gpiochip0 (tegra-gpio) [ 0.456843] gpiochip_setup_dev: registered GPIOs 256 to 319 on device: gpiochip1 (tegra-gpio-aon) [ 0.458447] iommu: Adding device 10003000.pcie-controller to group 47 [ 0.458474] arm-smmu: forcing sodev map for 10003000.pcie-controller [ 0.458793] iommu: Adding device sound to group 48 [ 0.459111] iommu: Adding device 3510000.hda to group 49 [ 0.465622] iommu: Adding device c1a0000.aon to group 50 [ 0.466156] vdd-1v8-ap: 1800 mV [ 0.466387] vdd-ac-bat: 5000 mV [ 0.466585] vdd-3v3-disp-cvb: 3300 mV [ 0.466871] vdd-3v3-cvb: 3300 mV [ 0.467067] vdd-1v8-cvb: 1800 mV [ 0.467262] vdd-fan: 5000 mV [ 0.467461] vdd-hdmi-5v0: 5000 mV [ 0.467663] vdd_sys_en: 1200 mV [ 0.485837] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.488774] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.489014] SCSI subsystem initialized [ 0.489262] usbcore: registered new interface driver usbfs [ 0.489309] usbcore: registered new interface driver hub [ 0.489349] usbcore: registered new device driver usb [ 0.492256] random: fast init done [ 0.499185] max77620 4-003c: PMIC Version OTP:0x45 and ES:0x8 [ 0.505510] vddio-ddr: at 1125 mV [ 0.509470] avdd_dsi_csi: 1200 mV [ 0.513378] vdd-1v8: 1800 mV [ 0.517378] vdd-3v3-sys: 3300 mV [ 0.518049] spmic-ldo0: at 1800 mV [ 0.518691] spmic-ldo1: at 800 mV [ 0.520922] vddio-3v3: 3300 mV [ 0.521578] vddio-sdmmc1: 1800 <--> 3300 mV at 3300 mV [ 0.524926] vdd-rtc: at 800 mV [ 0.525524] avdd-ts-hv: 1800 <--> 3300 mV at 1800 mV [ 0.528921] spmic-ldo6: at 800 mV [ 0.532920] vdd-pex-1v00: 1000 mV [ 0.533530] dvdd-pex: 1000 mV [ 0.535524] GPIO line 253 (spmic_gpio_input) hogged as input [ 0.535667] GPIO line 254 (spmic_gpio_input) hogged as input [ 0.535833] gpiochip_setup_dev: registered GPIOs 248 to 255 on device: gpiochip2 (max77620-gpio) [ 0.536024] max77620 4-003c: max77620 probe successful [ 0.536401] media: Linux media interface: v0.10 [ 0.536440] Linux video capture interface: v2.00 [ 0.538741] pps_core: LinuxPPS API ver. 1 registered [ 0.538757] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.538786] PTP clock support registered [ 0.538989] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.539181] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.539210] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.540356] trusty trusty: trusty version: Built: 12:20:14 Jul 26 2021 [ 0.540383] trusty trusty: selected api version: 3 (requested 3) [ 0.541180] Advanced Linux Sound Architecture Driver Initialized. [ 0.541526] Bluetooth: Core ver 2.22 [ 0.541564] NET: Registered protocol family 31 [ 0.541576] Bluetooth: HCI device and connection manager initialized [ 0.541592] Bluetooth: HCI socket layer initialized [ 0.541606] Bluetooth: L2CAP socket layer initialized [ 0.541627] Bluetooth: SCO socket layer initialized [ 0.542198] vdd-sys-bl: 3300 mV [ 0.543744] camchar: rtcpu character device driver loaded [ 0.544190] gpio tegra-gpio wake61 for gpio=92(L:4) [ 0.544272] extcon-gpio-states external-connection:extcon@1: Cable state:1, cable id:1 [ 0.545169] clocksource: Switched to clocksource arch_sys_counter [ 0.567079] VFS: Disk quotas dquot_6.6.0 [ 0.567167] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.567438] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.567885] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000c6000000, size=0x2a000000 [ 0.568007] cma: enabled page replacement for spfn=c6000, epfn=f0000 [ 0.568021] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 0.568039] nvmap: nvmap_select_cache_ops() nvmap cache ops set to roc [ 0.568055] nvmap_page_pool_init: Total RAM pages: 975396 [ 0.568067] nvmap_page_pool_init: nvmap page pool size: 121924 pages (476 MB) [ 0.568123] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.568581] misc nvmap: created heap vpr base 0x00000000c6000000 size (688128KiB) [ 0.570547] tegra-gpcdma 2600000.dma: GPC DMA driver register 32 channels [ 0.577572] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type BCPU-therm [ 0.577816] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type MCPU-therm [ 0.578203] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.578329] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.578517] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 0.578745] la/ptsa driver initialized. [ 0.578764] pre_t19x_iso_plat_init(): iso emc max clk=1600000KHz [ 0.578775] pre_t19x_iso_plat_init(): max_iso_bw=23040000KB [ 0.579081] NET: Registered protocol family 2 [ 0.579757] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.579935] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.580256] TCP: Hash tables configured (established 32768 bind 32768) [ 0.580315] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.580388] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.580668] NET: Registered protocol family 1 [ 0.581026] RPC: Registered named UNIX socket transport module. [ 0.581043] RPC: Registered udp transport module. [ 0.581054] RPC: Registered tcp transport module. [ 0.581065] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.581212] Trying to unpack rootfs image as initramfs... [ 0.790366] Freeing initrd memory: 7068K [ 0.804798] host1x 13e10000.host1x: initialized [ 0.806160] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.808265] audit: initializing netlink subsys (disabled) [ 0.808303] audit: type=2000 audit(0.688:1): initialized [ 0.808703] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 0.815222] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.816214] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.816747] 9p: Installing v9fs 9p2000 file system support [ 0.818910] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.818984] io scheduler noop registered [ 0.819195] io scheduler cfq registered (default) [ 0.822072] gic 2a41000.agic-controller: GIC IRQ controller registered [ 0.882291] iommu: Adding device aconnect@2a41000:adsp_audio to group 51 [ 0.902007] iommu: Adding device 2993000.adsp to group 52 [ 0.902537] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 0.907075] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.907975] tegra-pwm 3290000.pwm: PWM clk can sleep in ops [ 0.908792] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 0.909601] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.911681] tegra-pcie 10003000.pcie-controller: 2x1, 1x1, 1x1 configuration [ 0.912401] tegra-pcie 10003000.pcie-controller: PCIE: Enable power rails [ 0.912698] tegra-pcie 10003000.pcie-controller: probing port 0, using 2 lanes [ 0.912928] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 0.913051] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 0.914885] tegra-pcie 10003000.pcie-controller: probing port 2, using 1 lanes [ 0.915100] tsec 15500000.tsec: initialized [ 0.915956] tsec 15100000.tsecb: initialized [ 0.918126] nvdec 15480000.nvdec: initialized [ 0.921891] falcon 15340000.vic: initialized [ 0.923004] falcon 154c0000.nvenc: initialized [ 0.924015] falcon 15380000.nvjpg: initialized [ 0.926042] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56) [ 0.927569] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57) [ 0.929084] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58) [ 0.930619] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59) [ 0.932116] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60) [ 0.933636] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61) [ 0.935143] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62) [ 0.936662] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63) [ 0.939424] tegradccommon 15200000.dc_common: host1x channel mapped [ 0.939446] tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated [ 0.939483] tegradccommon 15200000.dc_common: dma mapping done [ 0.939983] tegradc 15200000.nvdisplay: disp0 connected to head0->/host1x/sor1 [ 0.940037] generic_infoframe_type: 0x87 [ 0.940115] tegradc 15200000.nvdisplay: DT parsed successfully [ 0.940143] tegradc 15200000.nvdisplay: Display dc.ffffff800b3e0000 registered with id=0 [ 0.945796] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 16727000 KB/s [ 0.945817] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 665600000 Hz [ 0.945836] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 357620000 Hz [ 0.946025] tegradc 15200000.nvdisplay: vblank syncpt # 8 for dc 0 [ 0.946042] tegradc 15200000.nvdisplay: vpulse3 syncpt # 9 for dc 0 [ 0.946996] tegradc 15200000.nvdisplay: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 0.948982] tegradc 15200000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board [ 0.949002] tegradc 15200000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 0.951208] tegradc 15200000.nvdisplay: probed [ 0.952074] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 32 channels [ 0.952641] tegra-fuse-burn 3820000.efuse:efuse-burn: shutdown limit check disabled [ 0.952676] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized [ 0.953864] kfuse 3830000.kfuse: initialized [ 0.955194] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 0.958215] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.960321] console [ttyS0] disabled [ 0.960368] 3100000.serial: ttyS0 at MMIO 0x3100000 (irq = 33, base_baud = 25500000) is a Tegra [ 1.370023] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 1.774267] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 2.178508] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 2.180524] tegra-pcie 10003000.pcie-controller: link 0 down, ignoring [ 2.311163] tegra-pcie 10003000.pcie-controller: PCI host bridge to bus 0000:00 [ 2.311167] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 2.311171] pci_bus 0000:00: root bus resource [mem 0x40100000-0x47ffffff] [ 2.311174] pci_bus 0000:00: root bus resource [mem 0x48000000-0x7fffffff pref] [ 2.311178] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.311521] iommu: Adding device 0000:00:03.0 to group 53 [ 2.311529] arm-smmu: forcing sodev map for 0000:00:03.0 [ 2.311607] pci 0000:00:03.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 2.312478] iommu: Adding device 0000:01:00.0 to group 54 [ 2.312482] arm-smmu: forcing sodev map for 0000:01:00.0 [ 2.321306] pci 0000:00:03.0: BAR 14: assigned [mem 0x40100000-0x401fffff] [ 2.321310] pci 0000:00:03.0: BAR 13: assigned [io 0x1000-0x1fff] [ 2.321317] pci 0000:01:00.0: BAR 2: assigned [mem 0x40100000-0x4010ffff 64bit] [ 2.321355] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 2.321368] pci 0000:00:03.0: PCI bridge to [bus 01] [ 2.321372] pci 0000:00:03.0: bridge window [io 0x1000-0x1fff] [ 2.321381] pci 0000:00:03.0: bridge window [mem 0x40100000-0x401fffff] [ 2.321689] pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt [ 2.321692] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.273993] console [ttyS0] enabled [ 3.274311] Console: switching to colour frame buffer device 240x67 [ 3.278378] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 34, base_baud = 0) is a TEGRA_UART [ 3.284299] serial-tegra 3130000.serial: RX in PIO mode [ 3.284871] 3130000.serial: ttyTHS3 at MMIO 0x3130000 (irq = 35, base_baud = 0) is a TEGRA_UART [ 3.293882] [drm] Initialized [ 3.309890] tegradc 15200000.nvdisplay: fb registered [ 3.313072] brd: module loaded [ 3.318268] gpio tegra-gpio wake21 for gpio=121(P:1) [ 3.320541] loop: module loaded [ 3.320586] tegra_profiler: version: 1.145, samples/io: 49/28 [ 3.320659] tegra_profiler: auth: init [ 3.321291] THERMAL EST: found 3 subdevs [ 3.321294] THERMAL EST num_resources: 0 [ 3.321297] [THERMAL EST subdev 0] [ 3.321301] [THERMAL EST subdev 1] [ 3.321304] [THERMAL EST subdev 2] [ 3.321313] THERMAL EST: Found 2 profiles, default profile is quiet [ 3.321576] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 3.321578] THERMAL EST: thz register success. [ 3.321667] THERMAL EST: end of probe, return err: 0 [ 3.322270] sd: No Scsi addr parsed to reserve index [ 3.322292] hisi_sas: driver version v1.6 [ 3.329817] libphy: Fixed MDIO Bus: probed [ 3.330240] tun: Universal TUN/TAP device driver, 1.6 [ 3.330242] tun: (C) 1999-2004 Max Krasnyansky [ 3.333763] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 3.333764] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 3.333804] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 3.333805] igb: Copyright (c) 2007-2014 Intel Corporation. [ 3.333838] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 3.333839] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 3.333870] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k [ 3.333872] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 3.454457] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 3.460526] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 3.467563] Parent Clock set for DC plld2 [ 3.534710] tegradc 15200000.nvdisplay: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 3.544101] tegradc 15200000.nvdisplay: hdmi: get RGB quant from REG programmed by BL. [ 3.552029] tegradc 15200000.nvdisplay: hdmi: BL set VIC 0 [ 3.557518] tegradc 15200000.nvdisplay: hdmi: get YCC quant from REG programmed by BL. [ 3.577198] eqos 2490000.ether_qos: can't get pllrefe_vcoout clk (-2) [ 3.585538] eqos 2490000.ether_qos: failed to read eqos_auto_cal_config_0_reg [ 3.593085] eqos 2490000.ether_qos: Setting local MAC: 48 b0 2d 3b 72 1e [ 3.599814] Using phyrst_lpmode = 1 from DT [ 3.604075] libphy: dwc_phy: probed [ 3.609631] PPP generic driver version 2.4.2 [ 3.614037] PPP BSD Compression module registered [ 3.618757] PPP Deflate Compression module registered [ 3.623825] PPP MPPE Compression module registered [ 3.628624] NET: Registered protocol family 24 [ 3.633124] usbcore: registered new interface driver r8152 [ 3.638646] usbcore: registered new interface driver asix [ 3.644081] usbcore: registered new interface driver ax88179_178a [ 3.650208] usbcore: registered new interface driver cdc_ether [ 3.656077] usbcore: registered new interface driver net1080 [ 3.661767] usbcore: registered new interface driver cdc_subset [ 3.667721] usbcore: registered new interface driver zaurus [ 3.673332] usbcore: registered new interface driver cdc_ncm [ 3.679114] VFIO - User Level meta-driver version: 0.3 [ 3.685055] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.691604] ehci-pci: EHCI PCI platform driver [ 3.696089] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.702283] ohci-pci: OHCI PCI platform driver [ 3.706764] ohci-platform: OHCI generic platform driver [ 3.715456] tegra-xusb 3530000.xhci: USB2 port 0 has OTG_CAP [ 3.722565] tegra-xusb 3530000.xhci: extcon 0: ffffffc0efb38000 id [ 3.729466] usbcore: registered new interface driver uas [ 3.734807] tegra-xusb 3530000.xhci: Firmware timestamp: 2020-07-06 13:39:28 UTC, Version: 55.18 release [ 3.734829] tegra-xusb 3530000.xhci: xHCI Host Controller [ 3.734841] tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 1 [ 3.735569] tegra-xusb 3530000.xhci: hcc params 0x0184fd25 hci version 0x100 quirks 0x00050810 [ 3.735597] tegra-xusb 3530000.xhci: irq 68, io mem 0x03530000 [ 3.735771] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.735774] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.735777] usb usb1: Product: xHCI Host Controller [ 3.735780] usb usb1: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 3.735783] usb usb1: SerialNumber: 3530000.xhci [ 3.745559] hub 1-0:1.0: USB hub found [ 3.745589] hub 1-0:1.0: 4 ports detected [ 3.745921] tegra-xusb 3530000.xhci: xHCI Host Controller [ 3.745929] tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 2 [ 3.746085] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 3.746089] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.746092] usb usb2: Product: xHCI Host Controller [ 3.746095] usb usb2: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 3.746097] usb usb2: SerialNumber: 3530000.xhci [ 3.746371] hub 2-0:1.0: USB hub found [ 3.746394] hub 2-0:1.0: 3 ports detected [ 3.746825] Wake76 for irq=199 [ 3.746827] Wake77 for irq=199 [ 3.746828] Wake78 for irq=199 [ 3.746830] Wake79 for irq=199 [ 3.746831] Wake80 for irq=199 [ 3.746832] Wake81 for irq=199 [ 3.746833] Wake82 for irq=199 [ 3.746857] tegra-xusb 3530000.xhci: Upgrade port 0 to USB3.0 [ 3.746861] tegra-xusb 3530000.xhci: Upgrade port 1 to USB3.0 [ 3.849386] usb usb2: usb_suspend_both: status 0 [ 3.897863] usbcore: registered new interface driver usb-storage [ 3.903949] usbcore: registered new interface driver usbserial [ 3.912764] tegra-xudc-new 3550000.xudc: device count: 1 [ 3.919092] tegra-xudc-new 3550000.xudc: USB charger detection disabled [ 3.925730] tegra-xudc-new 3550000.xudc: vbus state: 1 [ 3.930882] tegra-xudc-new 3550000.xudc: device mode on: 0 [ 3.936395] tegra-xudc-new 3550000.xudc: active: 0 => 1 [ 3.942059] mousedev: PS/2 mouse device common for all mice [ 3.947705] usbcore: registered new interface driver xpad [ 4.073139] usb 1-3: new full-speed USB device number 2 using tegra-xusb [ 4.080193] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 4.088462] Wake73 for irq=42 [ 4.092618] rtc rtc1: alarm rtc device [ 4.096388] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ 4.098073] usb 1-3: New USB device found, idVendor=0451, idProduct=2036 [ 4.098077] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 4.098080] usb 1-3: Product: General Purpose USB Hub [ 4.099101] hub 1-3:1.0: USB hub found [ 4.099218] hub 1-3:1.0: 2 ports detected [ 4.130019] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 4.136289] i2c /dev entries driver [ 4.141195] i2c i2c-2: Added multiplexed i2c bus 9 [ 4.146257] i2c i2c-2: Added multiplexed i2c bus 10 [ 4.151156] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 4.158120] imx219 9-0010: tegracam sensor driver:imx219_v2.0.6 [ 4.187378] tegra-i2c 3180000.i2c: no acknowledge from address 0x10 [ 4.193713] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 4.201336] imx219 9-0010: board setup failed [ 4.205792] imx219: probe of 9-0010 failed with error -121 [ 4.211622] imx219 10-0010: tegracam sensor driver:imx219_v2.0.6 [ 4.240844] tegra-i2c 3180000.i2c: no acknowledge from address 0x10 [ 4.247159] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 4.254780] imx219 10-0010: board setup failed [ 4.259273] imx219: probe of 10-0010 failed with error -121 [ 4.265855] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 4.276750] parse_throttle_dt_data: Num cap clks = 4 [ 4.281741] parse_throttle_dt_data: clk=mcpu type=1 [ 4.286631] parse_throttle_dt_data: clk=bcpu type=2 [ 4.291518] parse_throttle_dt_data: clk=gpu type=4 [ 4.296313] parse_throttle_dt_data: clk=emc type=3 [ 4.301752] tegra_throttle_probe: probe successful. #cdevs=4 [ 4.307930] FAN dev name: pwm-fan [ 4.311303] FAN:gpio request success. [ 4.315019] FAN: can't find tach_gpio [ 4.318749] pwm_fan_driver pwm-fan: Found 2 profiles, default profile is quiet [ 4.326080] pwm_fan_driver pwm-fan: cap state:4, cap pwm:255 [ 4.331962] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 4.338630] pwm_fan_driver pwm-fan: tach period: 1000 [ 4.344166] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 4.351765] pwm_fan_driver pwm-fan: index 1: pwm=130, rpm=1000, rru=2, rrd=2, state:2 [ 4.359650] pwm_fan_driver pwm-fan: index 2: pwm=160, rpm=2000, rru=1, rrd=1, state:2 [ 4.367517] pwm_fan_driver pwm-fan: index 3: pwm=200, rpm=3000, rru=1, rrd=1, state:2 [ 4.375353] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 4.383183] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 4.391017] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 4.398849] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 4.406680] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 4.414597] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 4.423021] tegra-oc-event d280000.soctherm-oc-event: OC driver initialized [ 4.430002] usb 1-3.1: new full-speed USB device number 3 using tegra-xusb [ 4.437858] device-mapper: uevent: version 1.0.3 [ 4.442832] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 4.451515] CPU EMC frequency mapping table: from device tree [ 4.458409] usb 1-3.1: New USB device found, idVendor=13d3, idProduct=3549 [ 4.465308] usb 1-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.472633] usb 1-3.1: Product: Bluetooth Radio [ 4.477197] usb 1-3.1: Manufacturer: Realtek [ 4.481486] usb 1-3.1: SerialNumber: 00e04c000001 [ 4.486987] cpufreq: platform driver Initialization: pass [ 4.493001] cpuidle: Initializing cpuidle driver init for Denver cluster [ 4.499842] cpuidle: Initializing cpuidle driver init for A57 cluster [ 4.507075] sdhci: Secure Digital Host Controller Interface driver [ 4.513258] sdhci: Copyright(c) Pierre Ossman [ 4.517617] sdhci-pltfm: SDHCI platform and OF driver helper [ 4.524210] sdhci-tegra 3460000.sdhci: Client registration for eMC Successful [ 4.532930] CMDQ: cmdq_platfm_init successful [ 4.537725] sdhci-tegra 3440000.sdhci: Got CD GPIO [ 4.542858] CQE: CMD_TIMING bit set for R1B DCMD [ 4.545477] sdhci-tegra 3440000.sdhci: Client registration for eMC Successful [ 4.547165] sdhci-tegra 3440000.sdhci: wakeup init done, cdirq 286 [ 4.597237] mmc1: SDHCI controller on 3440000.sdhci [3440000.sdhci] using ADMA 64-bit with 64 bit addr [ 4.601128] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit with 64 bit addr [ 4.642844] mmc0: mmc_decode_ext_csd: CMDQ supported: depth: 31, cmdq_support: 1 [ 4.663926] mmc0: periodic cache flush enabled [ 4.668376] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 4.674993] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 4.683644] mmcblk0boot0: mmc0:0001 DG4016 partition 1 4.00 MiB [ 4.693673] mmcblk0boot1: mmc0:0001 DG4016 partition 2 4.00 MiB [ 4.703706] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB [ 4.715831] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 [ 4.788076] mmc1: hw tuning done ... [ 4.791687] mmc1: new ultra high speed SDR104 SDXC card at address 59b4 [ 4.798518] mmcblk1: mmc1:59b4 58.2 GiB [ 4.805350] mmcblk1: p1 [ 13.649130] tegra-i2c 3190000.i2c: rx dma timeout txlen:28 rxlen:128 [ 13.655490] tegra-i2c 3190000.i2c: --- register dump for debugging ---- [ 13.662110] tegra-i2c 3190000.i2c: I2C_CNFG - 0x22c00 [ 13.667162] tegra-i2c 3190000.i2c: I2C_PACKET_TRANSFER_STATUS - 0x10001 [ 13.673773] tegra-i2c 3190000.i2c: I2C_FIFO_CONTROL - 0x1c [ 13.679256] tegra-i2c 3190000.i2c: I2C_FIFO_STATUS - 0x800040 [ 13.685000] tegra-i2c 3190000.i2c: I2C_INT_MASK - 0x6c [ 13.690137] tegra-i2c 3190000.i2c: I2C_INT_STATUS - 0x2 [ 13.695390] tegra-i2c 3190000.i2c: i2c transfer timed out addr: 0x50 [ 13.702177] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 13.709402] Extcon AUX1(HDMI) enable [ 13.713347] tegradc 15210000.nvdisplay: disp1 connected to head1->/host1x/sor [ 13.720567] tegradc 15210000.nvdisplay: DT parsed successfully [ 13.726421] tegradc 15210000.nvdisplay: Display dc.ffffff800ba90000 registered with id=1 [ 13.734657] tegradc 15210000.nvdisplay: vblank syncpt # 11 for dc 1 [ 13.740929] tegradc 15210000.nvdisplay: vpulse3 syncpt # 12 for dc 1 [ 13.754081] tegradc 15210000.nvdisplay: probed [ 13.758672] tegradc 15210000.nvdisplay: fb registered [ 13.766908] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 13.769823] tegra-se-nvhost 15810000.se: initialized [ 13.770882] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 13.771334] tegra-se-nvhost 15820000.se: initialized [ 13.772271] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 13.772707] tegra-se-nvhost 15830000.se: initialized [ 13.773505] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 13.773920] tegra-se-nvhost 15840000.se: initialized [ 13.774833] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 13.777293] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 13.777419] hidraw: raw HID events driver (C) Jiri Kosina [ 13.778279] usbcore: registered new interface driver usbhid [ 13.778280] usbhid: USB HID core driver [ 13.782920] tegra186-cam-rtcpu b000000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 13.801482] tegra-ivc ivc-b000000.rtcpu: region 0: iova=0xbfef0000-0xbfefdb7f size=56192 [ 13.801706] tegra-ivc ivc-b000000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 13.801836] tegra-ivc ivc-b000000.rtcpu:vinotify@12c0: vinotify: ver=0 grp=1 RX[64x128]=0x1900-0x3980 TX[64x128]=0x3980-0x5a00 [ 13.802547] tegra-ivc ivc-b000000.rtcpu:mods@32c0: mods: ver=0 grp=1 RX[1x64]=0x5a00-0x5ac0 TX[1x64]=0x5ac0-0x5b80 [ 13.802619] tegra-ivc ivc-b000000.rtcpu:ivccontrol@52c0: ivccontrol: ver=0 grp=1 RX[16x320]=0x5b80-0x7000 TX[16x320]=0x7000-0x8480 [ 13.802671] tegra-ivc ivc-b000000.rtcpu:ivccapture@72c0: ivccapture: ver=0 grp=1 RX[16x64]=0x8480-0x8900 TX[16x64]=0x8900-0x8d80 [ 13.802723] tegra-ivc ivc-b000000.rtcpu:dbg@7c00: dbg: ver=0 grp=1 RX[1x384]=0x8d80-0x8f80 TX[1x384]=0x8f80-0x9180 [ 13.802824] tegra-ivc ivc-b000000.rtcpu:dbg@7e00: dbg: ver=0 grp=1 RX[1x8192]=0x9180-0xb200 TX[1x8192]=0xb200-0xd280 [ 13.803109] tegra186-cam-rtcpu b000000.rtcpu: using cam RTCPU IRQ (48) [ 13.803111] tegra186-cam-rtcpu b000000.rtcpu: tegra_camrtc_mon_create is successful [ 13.946207] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 13.954049] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 13.959551] tegradc 15210000.nvdisplay: blank - powerdown [ 13.964977] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 13.964991] tegra186-cam-rtcpu b000000.rtcpu: firmware version cpu=sce cmd=5 sha1=c73bbe92930645be44530c166eb578bfbb9499c3 [ 13.966576] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 13.966957] tegra186-aondbg aondbg: aondbg driver probe() OK [ 13.967341] register_ari_mca_banks: Registered MCA ROC:IOB [ 13.967653] register_ari_mca_banks: Registered MCA ROC:CCE [ 13.968368] tegra18-bridge 2390000.axi2apb: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 13.968370] tegra18-bridge 2390000.axi2apb: enabled timeout = 9894000 [ 13.968372] tegra18-bridge 2390000.axi2apb: bridge probed OK [ 13.968413] tegra18-bridge 23a0000.axi2apb: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 13.968415] tegra18-bridge 23a0000.axi2apb: enabled timeout = 9894000 [ 13.968417] tegra18-bridge 23a0000.axi2apb: bridge probed OK [ 13.968458] tegra18-bridge 23b0000.axi2apb: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 13.968459] tegra18-bridge 23b0000.axi2apb: enabled timeout = 9894000 [ 13.968461] tegra18-bridge 23b0000.axi2apb: bridge probed OK [ 13.968507] tegra18-bridge 23c0000.axi2apb: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 13.968509] tegra18-bridge 23c0000.axi2apb: enabled timeout = 9894000 [ 13.968510] tegra18-bridge 23c0000.axi2apb: bridge probed OK [ 13.968549] tegra18-bridge 23d0000.axi2apb: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 13.968550] tegra18-bridge 23d0000.axi2apb: enabled timeout = 9894000 [ 13.968552] tegra18-bridge 23d0000.axi2apb: bridge probed OK [ 13.968590] tegra18-bridge 2100000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 13.968594] tegra18-bridge 2100000.axip2p: enabled timeout = 9894000 [ 13.968595] tegra18-bridge 2100000.axip2p: bridge probed OK [ 13.968636] tegra18-bridge 2110000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 13.968640] tegra18-bridge 2110000.axip2p: enabled timeout = 9894000 [ 13.968642] tegra18-bridge 2110000.axip2p: bridge probed OK [ 13.968682] tegra18-bridge 2120000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 13.968686] tegra18-bridge 2120000.axip2p: enabled timeout = 9894000 [ 13.968688] tegra18-bridge 2120000.axip2p: bridge probed OK [ 13.968727] tegra18-bridge 2130000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 13.968731] tegra18-bridge 2130000.axip2p: enabled timeout = 9894000 [ 13.968732] tegra18-bridge 2130000.axip2p: bridge probed OK [ 13.968770] tegra18-bridge 2140000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 13.968772] tegra18-bridge 2140000.axip2p: enabled timeout = 9894000 [ 13.968774] tegra18-bridge 2140000.axip2p: bridge probed OK [ 13.968813] tegra18-bridge 2150000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 13.968818] tegra18-bridge 2150000.axip2p: enabled timeout = 9894000 [ 13.968819] tegra18-bridge 2150000.axip2p: bridge probed OK [ 13.968857] tegra18-bridge 2160000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 13.968862] tegra18-bridge 2160000.axip2p: enabled timeout = 9894000 [ 13.968863] tegra18-bridge 2160000.axip2p: bridge probed OK [ 13.968904] tegra18-bridge 2170000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 13.968909] tegra18-bridge 2170000.axip2p: enabled timeout = 9894000 [ 13.968911] tegra18-bridge 2170000.axip2p: bridge probed OK [ 13.968948] tegra18-bridge 2180000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 13.968953] tegra18-bridge 2180000.axip2p: enabled timeout = 9894000 [ 13.968955] tegra18-bridge 2180000.axip2p: bridge probed OK [ 13.968993] tegra18-bridge 2190000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 13.968997] tegra18-bridge 2190000.axip2p: enabled timeout = 9894000 [ 13.968999] tegra18-bridge 2190000.axip2p: bridge probed OK [ 13.969040] **** A57 ECC: Enabled [ 13.969042] tegra18_a57_serr_init: on CPU 5 a A57 Core [ 13.969097] tegra18x_actmon d230000.actmon: in actmon_register()... [ 13.969494] tegra18x_actmon d230000.actmon: initialization Completed for the device mc_all [ 13.969908] hw perfevents: enabled with denver15_uncore_pmu PMU driver, 3 counters available [ 13.970014] denver_knobs_init:MTS_VERSION:53679346 [ 13.971558] nvpmodel: initialized successfully [ 13.973741] trusty-virtio trusty:virtio: initializing [ 13.973839] trusty_ipc virtio0: vring0: va(pa) ffffffc0e9c7e000(0) qsz 32 notifyid 1 [ 13.973845] trusty_ipc virtio0: vring1: va(pa) ffffffc0e9cc0000(0) qsz 32 notifyid 2 [ 13.973900] trusty-virtio trusty:virtio: initializing done [ 13.974081] trusty_ipc virtio0: is online [ 13.974737] usbcore: registered new interface driver snd-usb-audio [ 13.983571] input: tegra-hda HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input0 [ 13.983703] input: tegra-hda HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input1 [ 13.993524] OPE platform probe [ 13.993589] OPE platform probe successful [ 14.038712] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 14.038784] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 14.038852] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 14.038916] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 14.038983] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 14.039051] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 14.039115] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 14.039182] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 14.039245] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 14.039314] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 14.039380] tegra-asoc: sound: ADMAIF11 <-> ADMAIF11 mapping ok [ 14.039445] tegra-asoc: sound: ADMAIF12 <-> ADMAIF12 mapping ok [ 14.039517] tegra-asoc: sound: ADMAIF13 <-> ADMAIF13 mapping ok [ 14.039580] tegra-asoc: sound: ADMAIF14 <-> ADMAIF14 mapping ok [ 14.039646] tegra-asoc: sound: ADMAIF15 <-> ADMAIF15 mapping ok [ 14.039712] tegra-asoc: sound: ADMAIF16 <-> ADMAIF16 mapping ok [ 14.039777] tegra-asoc: sound: ADMAIF17 <-> ADMAIF17 mapping ok [ 14.039843] tegra-asoc: sound: ADMAIF18 <-> ADMAIF18 mapping ok [ 14.039909] tegra-asoc: sound: ADMAIF19 <-> ADMAIF19 mapping ok [ 14.039975] tegra-asoc: sound: ADMAIF20 <-> ADMAIF20 mapping ok [ 14.059106] u32 classifier [ 14.059107] Actions configured [ 14.059165] Initializing XFRM netlink socket [ 14.059702] NET: Registered protocol family 10 [ 14.060245] NET: Registered protocol family 17 [ 14.060253] NET: Registered protocol family 15 [ 14.060308] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 14.060351] Bluetooth: RFCOMM socket layer initialized [ 14.060359] Bluetooth: RFCOMM ver 1.11 [ 14.060362] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 14.060365] Bluetooth: HIDP socket layer initialized [ 14.060379] 9pnet: Installing 9P2000 support [ 14.060412] Key type dns_resolver registered [ 14.063794] Registered cp15_barrier emulation handler [ 14.063807] Registered setend emulation handler [ 14.064673] registered taskstats version 1 [ 14.067162] isp 15600000.isp: initialized [ 14.070168] nvcsi 150c0000.nvcsi: initialized [ 14.071093] tegra-vi4 15700000.vi: using default number of vi channels,15 [ 14.073561] Wake83 for irq=51 [ 14.073641] gpio tegra-gpio-aon wake29 for gpio=56(FF:0) [ 14.073768] input: gpio-keys as /devices/gpio-keys/input/input2 [ 14.074902] tegra-vi4 15700000.vi: initialized [ 14.075694] tegra-vi4 15700000.vi: subdev 150c0000.nvcsi--2 bound [ 14.075773] tegra-vi4 15700000.vi: subdev 150c0000.nvcsi--1 bound [ 14.111213] tegra_rtc c2a0000.rtc: setting system clock to 2000-01-01 01:01:35 UTC (946688495) [ 14.111947] mmcblk mmc0:0001: Card claimed for testing. [ 14.111953] mmcblk mmc1:59b4: Card claimed for testing. [ 14.128707] bpmp: mounted debugfs mirror [ 14.129551] bwmgr: missing cdev-type property [ 14.133353] ALSA device list: [ 14.133356] #0: tegra-hda at 0x3518000 irq 381 [ 14.133357] #1: tegra-snd-t186ref-mobile-rt565x [ 14.697675] Extcon DP: HPD disabled [ 14.697676] hpd: hpd_switch 0 [ 14.697681] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 14.697690] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 14.697695] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 14.725764] Freeing unused kernel memory: 8640K [ 14.751338] Root device found: mmcblk0p1 [ 14.756384] Found dev node: /dev/mmcblk0p1 [ 14.803299] EXT4-fs (mmcblk0p1): 2 orphan inodes deleted [ 14.808637] EXT4-fs (mmcblk0p1): recovery complete [ 14.818274] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 14.828140] Rootfs mounted over mmcblk0p1 [ 14.848092] Switching from initrd to actual rootfs [ 14.927769] systemd[1]: System time before build time, advancing clock. [ 14.953522] ip_tables: (C) 2000-2006 Netfilter Core Team [ 14.967509] cgroup: cgroup2: unknown option "nsdelegate" [ 14.979249] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 15.001475] systemd[1]: Detected architecture arm64. [ 15.026841] systemd[1]: Set hostname to . [ 15.043753] random: crng init done [ 15.116789] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 15.133916] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 15.250874] systemd[1]: Created slice User and Session Slice. [ 15.256898] systemd[1]: Reached target User and Group Name Lookups. [ 15.263395] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 15.272496] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 15.282663] systemd[1]: Created slice System Slice. [ 15.338805] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 16.248778] using random self ethernet address [ 16.256098] using random host ethernet address [ 16.792861] using random self ethernet address [ 16.797409] using random host ethernet address [ 16.849161] mmc1: Data CRC error [ 16.852406] sdhci: =========== REGISTER DUMP (mmc1)=========== [ 16.852410] sdhci: Sys addr: 0x00000008 | Version: 0x00000404 [ 16.852416] sdhci: Blk size: 0x00007200 | Blk cnt: 0x00000007 [ 16.852419] sdhci: Argument: 0x00000000 | Trn mode: 0x0000003b [ 16.852423] sdhci: Present: 0x01fb0008 | Host ctl: 0x00000017 [ 16.852426] sdhci: Power: 0x00000001 | Blk gap: 0x00000000 [ 16.852429] sdhci: Wake-up: 0x00000000 | Clock: 0x00000007 [ 16.852432] sdhci: Timeout: 0x00000008 | Int stat: 0x00001000 [ 16.852436] sdhci: Int enab: 0x02ff108b | Sig enab: 0x02fc108b [ 16.852439] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000 [ 16.852442] sdhci: Caps: 0x3f6cd08c | Caps_1: 0x18006f77 [ 16.852445] sdhci: Cmd: 0x0000123a | Max curr: 0x00000000 [ 16.852447] sdhci: Host ctl2: 0x0000308b [ 16.852452] sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x00000000fc100410 [ 16.852474] sdhci: =========================================== [ 23.121134] tegra186-cam-rtcpu b000000.rtcpu: command: 0x04000000: response timeout [ 23.128873] ------------[ cut here ]------------ [ 23.133496] WARNING: CPU: 5 PID: 1158 at /dvs/git/dirty/git-master_linux/kernel/nvidia/drivers/platform/tegra/tegra-camera-rtcpu.c:465 tegra_camrtc_cmd_pm_suspend+0x98/0xb8 [ 23.148958] ---[ end trace 3a2c900c56fa4969 ]--- [ 23.153690] ------------[ cut here ]------------ [ 23.158311] WARNING: CPU: 5 PID: 1158 at /dvs/git/dirty/git-master_linux/kernel/nvidia/drivers/platform/tegra/tegra-camera-rtcpu.c:1090 tegra_cam_rtcpu_runtime_suspend+0x70/0xa8 [ 23.174194] ---[ end trace 3a2c900c56fa496a ]--- [ 37.837146] INFO: rcu_preempt self-detected stall on CPU [ 37.842475] 0-...: (5248 ticks this GP) idle=739/140000000000002/0 softirq=2810/2810 fqs=2376 [ 37.845112] INFO: rcu_preempt detected stalls on CPUs/tasks: [ 37.845117] 0-...: (5248 ticks this GP) idle=739/140000000000002/0 softirq=2810/2810 fqs=2376 [ 37.845121] (detected by 4, t=5252 jiffies, g=117, c=116, q=5357) [ 37.853112] INFO: rcu_sched detected stalls on CPUs/tasks: [ 37.853116] 0-...: (1 GPs behind) idle=739/140000000000002/0 softirq=2808/2810 fqs=2436 [ 37.853119] (detected by 4, t=5252 jiffies, g=-108, c=-109, q=93) [ 37.891450] (t=5263 jiffies g=117 c=116 q=5357) [ 64.189124] NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [NetworkManager:4324] [ 64.197208] Kernel panic - not syncing: softlockup: hung tasks [ 64.203033] CPU: 0 PID: 4324 Comm: NetworkManager Tainted: G W L 4.9.253-tegra #1 [ 64.211455] Hardware name: lanai-3636 (DT) [ 64.215544] Call trace: [ 64.217988] [] dump_backtrace+0x0/0x198 [ 64.223377] [] show_stack+0x24/0x30 [ 64.228421] [] dump_stack+0xa0/0xc4 [ 64.233465] [] panic+0x12c/0x2a8 [ 64.238249] [] watchdog_unpark_threads+0x0/0x98 [ 64.244334] [] __hrtimer_run_queues+0xd8/0x360 [ 64.250329] [] hrtimer_interrupt+0xa8/0x1e0 [ 64.256066] [] tegra186_timer_isr+0x34/0x48 [ 64.261803] [] __handle_irq_event_percpu+0x68/0x288 [ 64.268232] [] handle_irq_event_percpu+0x28/0x60 [ 64.274400] [] handle_irq_event+0x50/0x80 [ 64.279962] [] handle_fasteoi_irq+0xd4/0x1c0 [ 64.285785] [] generic_handle_irq+0x34/0x50 [ 64.291520] [] __handle_domain_irq+0x68/0xc0 [ 64.297341] [] gic_handle_irq+0x5c/0xb0 [ 64.302730] [] el1_irq+0xe8/0x194 [ 64.307599] [] irq_exit+0xd0/0x118 [ 64.312554] [] __handle_domain_irq+0x6c/0xc0 [ 64.318376] [] gic_handle_irq+0x5c/0xb0 [ 64.323765] [] el0_irq_naked+0x54/0x60 [ 64.329069] SMP: stopping secondary CPUs [ 64.333018] Kernel Offset: disabled [ 64.336497] Memory Limit: none [ 64.339546] trusty-log panic notifier - trusty version Built: 12:20:14 Jul 26 2021 [ 64.352343] Rebooting in 5 seconds.. [0000.147] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-c368a720) [0000.156] I> Boot-device: eMMC [0000.163] I> sdmmc bdev is already initialized [0000.168] I> pmic: reset reason (nverc) : 0x0 [0000.201] I> Found 19 partitions in SDMMC_BOOT (instance 3) [0000.221] I> Found 33 partitions in SDMMC_USER (instance 3) [0000.227] W> No valid slot number is found in scratch register [0000.232] W> Return default slot: _a [0000.236] I> A/B: bin_type (16) slot 0 [0000.239] I> Loading partition bpmp-fw at 0xd7800000 [0000.244] I> Reading two headers - addr:0xd7800000 blocks:1 [0000.250] I> Addr: 0xd7800000, start-block: 29417480, num_blocks: 1 [0000.274] I> Binary(16) of size 534416 is loaded @ 0xd7800000 [0000.280] W> No valid slot number is found in scratch register [0000.286] W> Return default slot: _a [0000.289] I> A/B: bin_type (17) slot 0 [0000.293] I> Loading partition bpmp-fw-dtb at 0xd79f0000 [0000.298] I> Reading two headers - addr:0xd79f0000 blocks:1 [0000.303] I> Addr: 0xd79f0000, start-block: 29419896, num_blocks: 1 [0000.322] I> Binary(17) of size 113248 is loaded @ 0xd79e4400 [0000.351] I> Loading SCE-FW ... [0000.354] W> No valid slot number is found in scratch register [0000.359] W> Return default slot: _a [0000.363] I> A/B: bin_type (12) slot 0 [0000.366] I> Loading partition sce-fw at 0xd7300000 [0000.371] I> Reading two headers - addr:0xd7300000 blocks:1 [0000.377] I> Addr: 0xd7300000, start-block: 29423992, num_blocks: 1 [0000.396] I> Binary(12) of size 125632 is loaded @ 0xd7300000 [0000.401] I> Init SCE [0000.404] I> Loading APE-FW ... [0000.407] W> No valid slot number is found in scratch register [0000.412] W> Return default slot: _a [0000.416] I> A/B: bin_type (11) slot 0 [0000.419] I> Loading partition adsp-fw at 0xd7400000 [0000.424] I> Reading two headers - addr:0xd7400000 blocks:1 [0000.430] I> Addr: 0xd7400000, start-block: 29401096, num_blocks: 1 [0000.449] I> Binary(11) of size 77216 is loaded @ 0xd7400000 [0000.455] I> Copy BTCM section [0000.457] W> No valid slot number is found in scratch register [0000.463] W> Return default slot: _a [0000.467] I> A/B: bin_type (13) slot 0 [0000.470] I> Loading partition cpu-bootloader at 0x96000000 [0000.476] I> Reading two headers - addr:0x96000000 blocks:1 [0000.481] I> Addr: 0x96000000, start-block: 29380616, num_blocks: 1 [0000.502] I> Binary(13) of size 308800 is loaded @ 0x96000000 [0000.508] W> No valid slot number is found in scratch register [0000.514] W> Return default slot: _a [0000.517] I> A/B: bin_type (20) slot 0 [0000.521] I> Loading partition bootloader-dtb at 0x85205400 [0000.526] I> Reading two headers - addr:0x85205400 blocks:1 [0000.531] I> Addr: 0x85205400, start-block: 29382664, num_blocks: 1 [0000.551] I> Binary(20) of size 191040 is loaded @ 0x85205400 [0000.557] W> No valid slot number is found in scratch register [0000.563] W> Return default slot: _a [0000.566] I> A/B: bin_type (14) slot 0 [0000.570] I> Loading partition secure-os at 0x85305600 [0000.575] I> Reading two headers - addr:0x85305600 blocks:1 [0000.580] I> Addr: 0x85305600, start-block: 29384712, num_blocks: 1 [0000.602] I> Binary(14) of size 402864 is loaded @ 0x85305600 [0000.610] I> TOS boot-params @ 0x85000000 [0000.614] I> TOS params prepared [0000.617] I> Loading EKS ... [0000.619] I> A/B: bin_type (15) slot 0 [0000.623] I> Loading partition eks at 0x85905800 [0000.628] I> Reading two headers - addr:0x85905800 blocks:1 [0000.633] I> Addr: 0x85905800, start-block: 29397000, num_blocks: 1 [0000.652] I> Binary(15) of size 1040 is loaded @ 0x85905800 [0000.657] I> EKB detected (length: 0x400) @ 0x85905800 [0000.662] I> Copied encrypted keys [0000.666] I> boot profiler @ 0x175844000 [0000.670] I> boot profiler for TOS @ 0x175844000 [0000.675] I> Unhalting SCE [0000.677] I> Primary Memory Start:80000000 Size:70000000 [0000.683] I> Extended Memory Start:f0110000 Size:856f0000 [0000.689] I> MB2(TBoot-BPMP) done NOTICE: BL31: v1.3(release):b5eeb33f7 NOTICE: BL31: Built : 12:15:17, Jul 26 2021 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! hwkey-agent: 41: hwkey-agent is running!! hwkey-agent: 315: key_mgnt_processing ....... hwkey-agent: 223: Setting EKB key 0 to slot 14 hwkey-agent: 178: Init hweky-agent services!! luks-srv: 40: luks-srv is running!! luks-srv: 157: Init luks-srv IPC services!! platform_bootstrap_epilog: trusty bootstrap complete [0000.911] I> Welcome to Cboot [0000.914] I> Cboot Version: t186-00029e71 [0000.917] I> CPU-BL Params @ 0x175800000 [0000.921] I> 0) Base:0x00000000 Size:0x00000000 [0000.926] I> 1) Base:0x177f00000 Size:0x00100000 [0000.930] I> 2) Base:0x177e00000 Size:0x00100000 [0000.935] I> 3) Base:0x177d00000 Size:0x00100000 [0000.939] I> 4) Base:0x177c00000 Size:0x00100000 [0000.944] I> 5) Base:0x177b00000 Size:0x00100000 [0000.948] I> 6) Base:0x177800000 Size:0x00200000 [0000.953] I> 7) Base:0x177400000 Size:0x00400000 [0000.957] I> 8) Base:0x177a00000 Size:0x00100000 [0000.962] I> 9) Base:0x177300000 Size:0x00100000 [0000.966] I> 10) Base:0x176800000 Size:0x00800000 [0000.971] I> 11) Base:0x30000000 Size:0x00040000 [0000.975] I> 12) Base:0xf0000000 Size:0x00100000 [0000.980] I> 13) Base:0x30040000 Size:0x00001000 [0000.984] I> 14) Base:0x30048000 Size:0x00001000 [0000.989] I> 15) Base:0x30049000 Size:0x00001000 [0000.993] I> 16) Base:0x3004a000 Size:0x00001000 [0000.997] I> 17) Base:0x3004b000 Size:0x00001000 [0001.002] I> 18) Base:0x3004c000 Size:0x00001000 [0001.006] I> 19) Base:0x3004d000 Size:0x00001000 [0001.011] I> 20) Base:0x3004e000 Size:0x00001000 [0001.015] I> 21) Base:0x3004f000 Size:0x00001000 [0001.020] I> 22) Base:0x00000000 Size:0x00000000 [0001.024] I> 23) Base:0xf0100000 Size:0x00010000 [0001.028] I> 24) Base:0x00000000 Size:0x00000000 [0001.033] I> 25) Base:0x00000000 Size:0x00000000 [0001.037] I> 26) Base:0x00000000 Size:0x00000000 [0001.042] I> 27) Base:0x00000000 Size:0x00000000 [0001.046] I> 28) Base:0x84400000 Size:0x00400000 [0001.051] I> 29) Base:0x30000000 Size:0x00010000 [0001.055] I> 30) Base:0x178000000 Size:0x08000000 [0001.059] I> 31) Base:0x00000000 Size:0x00000000 [0001.064] I> 32) Base:0x176000000 Size:0x00600000 [0001.068] I> 33) Base:0x80000000 Size:0x70000000 [0001.073] I> 34) Base:0xf0110000 Size:0x856f0000 [0001.077] I> 35) Base:0x00000000 Size:0x00000000 [0001.082] I> 36) Base:0x00000000 Size:0x00000000 [0001.086] I> 37) Base:0x1772e0000 Size:0x00020000 [0001.091] I> 38) Base:0x84000000 Size:0x00400000 [0001.095] I> 39) Base:0x96000000 Size:0x02000000 [0001.100] I> 40) Base:0x85000000 Size:0x01200000 [0001.104] I> 41) Base:0x175800000 Size:0x00500000 [0001.109] I> 42) Base:0x00000000 Size:0x00000000 [0001.113] I> 43) Base:0x00000000 Size:0x00000000 [0001.117] GIC-SPI Target CPU: 4 [0001.121] Interrupts Init done [0001.124] calling constructors [0001.127] initializing heap [0001.130] initializing threads [0001.133] initializing timers [0001.136] creating bootstrap completion thread [0001.141] top of bootstrap2() [0001.144] CPU: ARM Cortex A57 [0001.147] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100 [0001.152] initializing platform [0001.156] I> Bl_dtb @0x85205400 [0001.159] I> gpio framework initialized [0001.164] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio' driver [0001.173] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio-aon' driver [0001.180] I> GPIO framework and drivers are initialized. [0001.185] I> Boot-device: eMMC [0001.192] I> sdmmc bdev is already initialized [0001.223] I> Found 19 partitions in SDMMC_BOOT (instance 3) [0001.241] I> Found 33 partitions in SDMMC_USER (instance 3) [0001.246] W> opt-in fuse is not set, skip fuse_burning [0001.251] I> Reserved memory at 0xfbe00000 for U-Boot relocation [0001.257] W> No valid slot number is found in scratch register [0001.263] W> Return default slot: _a [0001.272] I> A/B: bin_type (21) slot 0 [0001.276] I> Loading kernel-dtb from partition [0001.280] I> Loading partition kernel-dtb at 0x80000000 from device(0x1) [0001.297] I> Kernel_dtb @0x80000000 [0001.300] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee [0001.308] W> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0001.318] W> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0001.326] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0001.332] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xe8 [0001.340] W> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0001.350] W> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0001.358] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0001.366] I> fixed regulator driver initialized [0001.388] I> register 'maxim' power off handle [0001.393] I> virtual i2c enabled [0001.396] I> registered 'maxim,max77620' pmic [0001.400] I> tegrabl_gpio_driver_register: register 'max77620-gpio' driver [0001.410] E> failed to read label property for node 148580: 13 [0001.417] E> failed to read reg property for node 148676: 13 [0001.424] E> failed to read reg property for node 148728: 13 [0001.431] E> failed to read label property for node 148812: 13 [0001.438] E> failed to read reg property for node 148880: 13 [0001.444] E> failed to read reg property for node 148952: 13 [0001.452] I> Find /i2c@c250000's alias i2c7 [0001.456] I> Reading eeprom i2c=7 address=0x50 [0001.485] I> Device at /i2c@c250000:0x50 [0001.489] I> Reading eeprom i2c=7 address=0x57 [0001.493] E> I2C: slave not found in slaves. [0001.497] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true. [0001.505] E> I2C_DEV: Failed to send register address 0x00000000. [0001.511] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 7. [0001.520] E> eeprom: Failed to read I2C slave device [0001.525] I> Eeprom read failed 0x3526070d [0001.529] I> Find /i2c@3160000's alias i2c0 [0001.533] I> Reading eeprom i2c=0 address=0x50 [0001.538] E> I2C: slave not found in slaves. [0001.542] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0001.550] E> I2C_DEV: Failed to send register address 0x00000000. [0001.556] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 0. [0001.565] E> eeprom: Failed to read I2C slave device [0001.570] I> Eeprom read failed 0x3526070d [0001.575] I> Find /i2c@3180000's alias i2c2 [0001.579] I> Reading eeprom i2c=2 address=0x54 [0001.583] I> Enabling gpio chip_id = 2, gpio pin = 9 [0001.588] C> GPIO driver for chip_id 0x2 could not be found [0001.593] E> cam_eeprom_read: Can't get gpio driver [0001.598] I> Eeprom read failed 0x4d4d000d [0001.602] I> Reading eeprom i2c=2 address=0x57 [0001.606] I> Enabling gpio chip_id = 2, gpio pin = 9 [0001.611] C> GPIO driver for chip_id 0x2 could not be found [0001.616] E> cam_eeprom_read: Can't get gpio driver [0001.621] I> Eeprom read failed 0x4d4d000d [0001.625] I> create_pm_ids: id: 3636-0001-300-H, len: 15 [0001.630] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.653] I> regulator 'vdd-hdmi-5v0' already enabled [0001.664] I> regulator 'vdd-hdmi-5v0' already enabled [0001.669] I> hdmi cable connected [0001.674] I> setting 'vdd-pex-1v00' regulator to 1000000 micro volts [0001.681] I> setting 'vdd-1v8' regulator to 1800000 micro volts [0001.687] I> retrieved tmds range from prod_list_hdmi_soc [0001.694] E> cannot find any other nvdisp nodes [0001.703] E> I2C: Timeout while polling for bus clear. Last value 0x00000000. [0001.710] E> I2C: Failed to clear bus for instance 3. [0001.715] E> I2C: Failed to clear bus for instance 3. [0001.720] E> I2C_DEV: Failed to initialize instance 3. [0001.725] E> read_edid, invalid i2c handle [0001.732] I> hdmi_enable, starting HDMI initialisation [0001.739] I> hdmi_enable, HDMI initialisation complete [0001.758] initializing target [0001.761] calling apps_init() [0001.764] starting app kernel_boot_app [0001.786] I> found decompressor handler: lz4-legacy [0001.791] I> decompressing BMP blob ... [0001.803] I> Kernel type = Normal [0001.806] I> ########## Fixed storage boot ########## [0001.811] I> Loading kernel-bootctrl from partition [0001.815] I> Loading partition kernel-bootctrl at 0xa8000000 from device(0x1) [0001.830] W> tegrabl_get_kernel_bootctrl: magic number(0x00000000) is invalid [0001.837] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data [0001.844] W> No valid slot number is found in scratch register [0001.849] W> Return default slot: _a [0001.853] I> A/B: bin_type (24) slot 0 [0001.869] I> Boot image size read from image header: 99085 [0001.874] I> Boot image load address: 0x80400000 [0001.878] I> Loading kernel from partition [0001.882] I> Loading partition kernel at 0x80400000 from device(0x1) [0002.825] I> Validate kernel ... [0002.828] I> T18x: Authenticate kernel (bin_type 24), max size 0x4000000 [0002.836] I> Decrypt the buffer ... [0002.839] W> tegrabl_decrypt_block: fuse (0x0) is not burnt to do encryption (0x4); skip decryption. [0002.848] I> done [0002.850] I> Checking boot.img header magic ... [0002.854] I> [OK] [0002.856] I> kernel-dtb is already loaded [0002.860] I> Validate kernel-dtb ... [0002.863] I> T18x: Authenticate kernel-dtb (bin_type 21), max size 0x100000 [0002.870] I> Decrypt the buffer ... [0002.874] W> tegrabl_decrypt_block: fuse (0x0) is not burnt to do encryption (0x4); skip decryption. [0002.882] I> done [0002.884] I> Kernel hdr @0x80400000 [0002.887] I> Kernel dtb @0x80000000 [0002.891] I> decompressor handler not found [0002.895] I> Copying kernel image (626821 bytes) from 0x80400800 to 0x80600000 ... [0002.902] I> Done [0002.904] I> Move ramdisk (len: 0) from 0x8049a000 to 0x947d0000 [0002.911] I> Updated bpmp info to DTB [0002.916] I> Ramdisk: Base: 0x947d0000; Size: 0x0 [0002.920] I> Updated initrd info to DTB [0002.924] W> WARN: Fail to override "console=none" in commandline [0002.930] I> Active rootfs suffix: [0002.933] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display params [0002.941] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display params [0002.948] I> disabled_core_mask: 0xffffff0c [0002.952] W> No valid slot number is found in scratch register [0002.957] W> Return default slot: _a [0002.961] I> Active slot suffix: [0002.964] I> add_boot_slot_suffix: slot_suffix = [0002.968] I> Linux Cmdline: console=ttyS0,115200 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 video=tegrafb earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x1772e0000 gpt rootfs.slot_suffix= tegra_fbmem=0x800000@0x96085000 lut_mem=0x2008@0x96081000 usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 no_console_suspend boot.slot_suffix= boot.ratchetvalues=0.2031647.1 vpr_resize bl_prof_dataptr=0x10000@0x175840000 sdhci_tegra.en_boot_part_access=1 [0003.016] I> Updated bootarg info to DTB [0003.019] W> MAC addr invalid! [0003.022] E> Failed to get WIFI MAC address [0003.026] W> MAC addr invalid! [0003.029] E> Failed to get Bluetooth MAC address [0003.033] I> eeprom_get_mac_addr: MAC (type: 2): 48:b0:2d:3b:72:1e [0003.040] E> Found no plugin manager ids in source DT [0003.044] W> Add plugin manager ids from board info [0003.049] W> "plugin-manager" doesn't exist, creating [0003.054] W> "ids" doesn't exist, creating [0003.058] W> "connection" doesn't exist, creating [0003.063] W> "configs" doesn't exist, creating [0003.067] I> create_pm_ids: id: 3636-0001-300-H, len: 15 [0003.072] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0003.083] I> Adding plugin-manager/ids/3636-0001-300=/i2c@c250000:module@0x50 [0003.090] W> "i2c@c250000" doesn't exist, creating [0003.095] W> "module@0x50" doesn't exist, creating [0003.101] I> Adding plugin-manager/ids/3636-0001-300-H [0003.107] I> Adding plugin-manager/configs/3636-mem-type 00 [0003.112] I> Adding plugin-manager/configs/3636-power-config 00 [0003.118] I> Adding plugin-manager/configs/3636-misc-config 00 [0003.124] I> Adding plugin-manager/configs/3636-modem-config 00 [0003.130] I> Adding plugin-manager/configs/3636-touch-config 00 [0003.136] I> Adding plugin-manager/configs/3636-display-config 00 [0003.142] I> Adding plugin-manager/cvm [0003.146] W> "chip-id" doesn't exist, creating [0003.150] I> Adding plugin-manager/chip-id/A02P [0003.154] W> "odm-data" doesn't exist, creating [0003.159] I> Adding /chosen/plugin-manager/odm-data [0003.167] I> added [base:0x80000000, size:0x70000000] to /memory [0003.173] I> added [base:0xf0200000, size:0x85600000] to /memory [0003.179] I> added [base:0x175e00000, size:0x200000] to /memory [0003.184] I> added [base:0x176600000, size:0x200000] to /memory [0003.190] I> added [base:0x177000000, size:0x200000] to /memory [0003.196] I> Updated memory info to DTB [0003.200] E> add_disp_param: failed to get display params for du=1 [0003.207] W> "reset" doesn't exist, creating [0003.211] W> "pmc-reset-reason" doesn't exist, creating [0003.217] W> "pmic-reset-reason" doesn't exist, creating [0003.223] I> Adding ecid(00000001640911c11000000008028340) to DT [0003.228] I> disabled_core_mask: 0xffffff0c [0003.237] I> Add serial number:1421621061606 as DT property [0003.244] I> Plugin-manager override starting [0003.249] I> node /plugin-manager/fragement@0 matches [0003.257] I> node /plugin-manager/fragement@3 matches [0003.270] I> Disable plugin-manager status in FDT [0003.275] I> Plugin-manager override finished successfully [0003.280] I> tegrabl_load_kernel_and_dtb: Done [0003.325] I> Kernel EP: 0x80600000, DTB: 0x80000000 U-Boot 2020.04-g46e4604c78 (Jul 26 2021 - 12:10:58 -0700) SoC: tegra186 Model: NVIDIA P3636-0001 Board: NVIDIA P3636-0001 DRAM: 3.8 GiB MMC: sdhci@3400000: 1, sdhci@3460000: 0 Loading Environment from MMC... *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: Warning: ethernet@2490000 using MAC address from ROM eth0: ethernet@2490000 Hit any key to stop autoboot: 2  1  0 Card did not respond to voltage select! switch to partitions #0, OK mmc0(part 0) is current device Scanning mmc 0:1...