[ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.9.253 (root@ubuntu-HP-288-Pro-G6-Microtower-PC) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #167 SMP PREEMPT Thu Jun 9 15:17:25 CST 2022 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 80, [ 0.000000] OF: fdt: - 80000000 , 70000000 [ 0.000000] OF: fdt: - f0200000 , 185600000 [ 0.000000] OF: fdt: - 275e00000 , 200000 [ 0.000000] OF: fdt: - 276600000 , 200000 [ 0.000000] OF: fdt: - 277000000 , 200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fc000000 [ 0.000000] On node 0 totalpages: 2055168 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 523776 pages, LIFO batch:31 [ 0.000000] Normal zone: 24008 pages used for memmap [ 0.000000] Normal zone: 1531392 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 23 pages/cpu s57112 r8192 d28904 u94208 [ 0.000000] pcpu-alloc: s57112 r8192 d28904 u94208 alloc=23*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2022968 [ 0.000000] Kernel command line: console=ttyS0,115200 androidboot.presilicon=true firmware_class.path=/etc/firmware root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 video=tegrafb earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt rootfs.slot_suffix= usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 no_console_suspend boot.slot_suffix= boot.ratchetvalues=0.2031647.1 vpr_resize bl_prof_dataptr=0x10000@0x275840000 sdhci_tegra.en_boot_part_access=1 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 29988(91%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 7285804K/8220672K available (15102K kernel code, 2488K rwdata, 6528K rodata, 8448K init, 595K bss, 181204K reserved, 753664K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008200000 - 0xffffff80090c0000 ( 15104 KB) [ 0.000000] .rodata : 0xffffff80090c0000 - 0xffffff8009730000 ( 6592 KB) [ 0.000000] .init : 0xffffff8009730000 - 0xffffff8009f70000 ( 8448 KB) [ 0.000000] .data : 0xffffff8009f70000 - 0xffffff800a1de008 ( 2489 KB) [ 0.000000] .bss : 0xffffff800a1de008 - 0xffffff800a272d34 ( 596 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf07dc8000 ( 125 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc1f7200000 ( 8050 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000003] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.009892] Console: colour dummy device 80x25 [ 0.014553] console [tty0] enabled [ 0.018109] bootconsole [uart8250] disabled [ 0.022484] kmemleak: Kernel memory leak detector disabled [ 0.022499] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.022513] pid_max: default: 32768 minimum: 301 [ 0.022829] Security Framework initialized [ 0.022990] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.023000] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.023597] ftrace: allocating 46362 entries in 182 pages [ 0.146081] sched-energy: Sched-energy-costs installed from DT [ 0.146099] ASID allocator initialised with 65536 entries [ 0.184418] tegra-id: chipid=21817. [ 0.184431] tegra-id: opt_subrevision=1. [ 0.184453] Tegra Revision: A02p SKU: 0xdc CPU Process: 0 SoC Process: 0 [ 0.184465] DTS File Name: arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/quill/kernel-dts/tegra186-quill-p3310-1000-c03-00-base.dts [ 0.184479] DTB Build time: Jun 9 2022 15:16:29 [ 0.235110] CPU1: Booted secondary processor [4e0f0030] [ 0.266509] CPU2: Booted secondary processor [4e0f0030] [ 0.297505] CPU3: Booted secondary processor [411fd073] [ 0.329466] CPU4: Booted secondary processor [411fd073] [ 0.361464] CPU5: Booted secondary processor [411fd073] [ 0.361518] Brought up 6 CPUs [ 0.361553] SMP: Total of 6 processors activated. [ 0.361564] CPU features: detected feature: 32-bit EL0 Support [ 0.363846] CPU: All CPU(s) started at EL2 [ 0.364011] alternatives: patching kernel code [ 0.366945] devtmpfs: initialized [ 0.406665] Initilizing CustomIPI irq domain [ 0.406825] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.406849] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.414757] pinctrl core: initialized pinctrl subsystem [ 0.415002] OS set in device tree is not L4T. [ 0.415178] regulator-dummy: no parameters [ 0.415323] Initializing plugin-manager [ 0.415386] Plugin module not found [ 0.415432] Plugin-manager status disabled [ 0.417394] NET: Registered protocol family 16 [ 0.419166] pstore: using zlib compression [ 0.419422] console [pstore-1] enabled [ 0.419433] pstore: Registered ramoops as persistent store backend [ 0.419446] ramoops: attached 0x200000@0x275880000, ecc: 0/0 [ 0.437050] cpuidle: using governor menu [ 0.438542] bpmp: waiting for handshake [ 0.438558] bpmp: handshake completed [ 0.438579] bpmp: synchronizing channels [ 0.438597] bpmp: channels synchronized [ 0.438609] bpmp: mail init ok [ 0.440722] arm-smmu 12000000.iommu: probing hardware configuration... [ 0.440740] arm-smmu 12000000.iommu: SMMUv2 with: [ 0.440752] arm-smmu 12000000.iommu: stage 1 translation [ 0.440764] arm-smmu 12000000.iommu: stage 2 translation [ 0.440776] arm-smmu 12000000.iommu: nested translation [ 0.440790] arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80 [ 0.440809] arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)! [ 0.440828] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 0.440841] arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA [ 0.440853] arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA [ 0.443062] vdso: 2 pages (1 code @ ffffff80090c7000, 1 data @ ffffff8009f74000) [ 0.443095] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.445279] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.447392] Registering BPMP clocks... [ 0.447495] tegra_bpmp_clk_init: clock init ok (638 clks) [ 0.448468] Serial: AMBA PL011 UART driver [ 0.449586] tegra_powergate_init: DONE [ 0.449605] DTS File Name: arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/quill/kernel-dts/tegra186-quill-p3310-1000-c03-00-base.dts [ 0.449629] DTB Build time: Jun 9 2022 15:16:29 [ 0.451797] Tegra reboot handler registered. [ 0.453373] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.453452] tegra-pmc: get_secure_pmc_setting: done secure_pmc=0 [ 0.453474] tegra-pmc: ### PMC reset source: TEGRA_SOFTWARE_RESET [ 0.453486] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L1 [ 0.453510] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.453677] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.453702] tegra-pmc c360000.pmc: IO padctrl driver initialized [ 0.454055] iommu: Adding device 3460000.sdhci to group 0 [ 0.454763] iommu: Adding device 3400000.sdhci to group 1 [ 0.455831] iommu: Adding device 3507000.ahci-sata to group 2 [ 0.455857] arm-smmu: forcing sodev map for 3507000.ahci-sata [ 0.456324] iommu: Adding device 3160000.i2c to group 3 [ 0.456784] iommu: Adding device c240000.i2c to group 4 [ 0.457151] iommu: Adding device 3180000.i2c to group 5 [ 0.457539] iommu: Adding device 3190000.i2c to group 6 [ 0.457972] iommu: Adding device 31b0000.i2c to group 7 [ 0.458323] iommu: Adding device 31c0000.i2c to group 8 [ 0.458679] iommu: Adding device c250000.i2c to group 9 [ 0.459026] iommu: Adding device 31e0000.i2c to group 10 [ 0.460530] iommu: Adding device 3210000.spi to group 11 [ 0.460883] iommu: Adding device c260000.spi to group 12 [ 0.461235] iommu: Adding device 3240000.spi to group 13 [ 0.461947] iommu: Adding device 3100000.serial to group 14 [ 0.462306] iommu: Adding device 3110000.serial to group 15 [ 0.462648] iommu: Adding device c280000.serial to group 16 [ 0.462993] iommu: Adding device 3130000.serial to group 17 [ 0.464410] iommu: Adding device 2490000.ether_qos to group 18 [ 0.464442] arm-smmu: forcing sodev map for 2490000.ether_qos [ 0.465349] iommu: Adding device b000000.rtcpu to group 19 [ 0.467635] iommu: Adding device 13e10000.host1x to group 20 [ 0.467959] iommu: Adding device 13e10000.host1x:ctx0 to group 21 [ 0.468290] iommu: Adding device 13e10000.host1x:ctx1 to group 22 [ 0.468604] iommu: Adding device 13e10000.host1x:ctx2 to group 23 [ 0.468915] iommu: Adding device 13e10000.host1x:ctx3 to group 24 [ 0.469253] iommu: Adding device 13e10000.host1x:ctx4 to group 25 [ 0.469612] iommu: Adding device 13e10000.host1x:ctx5 to group 26 [ 0.469934] iommu: Adding device 13e10000.host1x:ctx6 to group 27 [ 0.470256] iommu: Adding device 13e10000.host1x:ctx7 to group 28 [ 0.470740] iommu: Adding device 150c0000.nvcsi to group 29 [ 0.471402] iommu: Adding device 15700000.vi to group 30 [ 0.471778] iommu: Adding device 15600000.isp to group 31 [ 0.472008] iommu: Adding device 15200000.dc_common to group 32 [ 0.472642] iommu: Adding device 15210000.nvdisplay to group 33 [ 0.473011] iommu: Adding device 15340000.vic to group 34 [ 0.473244] iommu: Adding device 154c0000.nvenc to group 35 [ 0.473470] iommu: Adding device 15480000.nvdec to group 36 [ 0.473861] iommu: Adding device 15380000.nvjpg to group 37 [ 0.474089] iommu: Adding device 15500000.tsec to group 38 [ 0.474311] iommu: Adding device 15100000.tsecb to group 39 [ 0.475024] iommu: Adding device 15810000.se to group 40 [ 0.475258] iommu: Adding device 15820000.se to group 41 [ 0.475481] iommu: Adding device 15830000.se to group 42 [ 0.475705] iommu: Adding device 15840000.se to group 43 [ 0.476603] iommu: Adding device smmu_test to group 44 [ 0.477225] mc: mapped MMIO address: 0xffffff800a5e0000 -> 0x2c10000 [ 0.477248] mc: mapped MMIO address: 0xffffff800a7b0000 -> 0x2c20000 [ 0.477267] mc: mapped MMIO address: 0xffffff800a7d0000 -> 0x2c30000 [ 0.477288] mc: mapped MMIO address: 0xffffff800b010000 -> 0x2c40000 [ 0.477307] mc: mapped MMIO address: 0xffffff800b030000 -> 0x2c50000 [ 0.477325] nv-tegra-mc 2c10000.mc: No mssnvlink node [ 0.477344] mc-err: mcerr ops are set to t18x [ 0.477566] dram-ecc: DRAM ECC disabled-MC_ECC_CONTROL:0x0000000c [ 0.478752] iommu: Adding device 3530000.xhci to group 45 [ 0.478779] arm-smmu: forcing sodev map for 3530000.xhci [ 0.479237] iommu: Adding device 3550000.xudc to group 46 [ 0.479259] arm-smmu: forcing sodev map for 3550000.xudc [ 0.479977] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_83 = 0x10a [ 0.479995] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3 [ 0.480010] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256 [ 0.480662] iommu: Adding device 17000000.gp10b to group 47 [ 0.481762] tegra-reset 5000000.clock: registered 193 resets. [ 0.484039] iommu: Adding device d000000.bpmp to group 48 [ 0.484250] bpmp: ping status is 0 [ 0.484349] bpmp d000000.bpmp: firmware tag is 91572a54614f84d0fd0c270beec2c56f [ 0.486900] bpmp d000000.bpmp: probe ok [ 0.490230] iommu: Adding device 2600000.dma to group 49 [ 0.491135] gpio gpiochip0: gpio-line-names specifies 180 line names but there are 192 lines on the chip [ 0.491650] GPIO line 461 (camera-control-output-low) hogged as output/low [ 0.491693] GPIO line 456 (camera-control-output-low) hogged as output/low [ 0.491733] GPIO line 457 (camera-control-output-low) hogged as output/low [ 0.491772] GPIO line 426 (camera-control-output-low) hogged as output/low [ 0.491812] GPIO line 424 (wifi-enable) hogged as output/high [ 0.491851] GPIO line 445 (sdmmc-wake-support-input) hogged as input [ 0.491890] GPIO line 446 (sdmmc-wake-support-output) hogged as output/low [ 0.492055] gpiochip_setup_dev: registered GPIOs 320 to 511 on device: gpiochip0 (tegra-gpio) [ 0.495740] gpio gpiochip1: gpio-line-names specifies 60 line names but there are 64 lines on the chip [ 0.495871] GPIO line 315 (wifi-wake-ap) hogged as input [ 0.496023] gpiochip_setup_dev: registered GPIOs 256 to 319 on device: gpiochip1 (tegra-gpio-aon) [ 0.497705] iommu: Adding device 10003000.pcie-controller to group 50 [ 0.497732] arm-smmu: forcing sodev map for 10003000.pcie-controller [ 0.498074] iommu: Adding device sound to group 51 [ 0.498445] iommu: Adding device 3510000.hda to group 52 [ 0.505961] iommu: Adding device c1a0000.aon to group 53 [ 0.506409] vdd-ac-bat: 5000 mV [ 0.508068] vdd-1v8-ap: 1800 mV [ 0.522525] random: fast init done [ 0.533900] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.536679] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.536881] SCSI subsystem initialized [ 0.536995] libata version 3.00 loaded. [ 0.537179] usbcore: registered new interface driver usbfs [ 0.537226] usbcore: registered new interface driver hub [ 0.537263] usbcore: registered new device driver usb [ 0.539586] tegra-i2c 3160000.i2c: no acknowledge from address 0x74 [ 0.539631] pca953x 0-0074: failed reading register [ 0.539679] pca953x: probe of 0-0074 failed with error -121 [ 0.540019] tegra-i2c 3160000.i2c: no acknowledge from address 0x77 [ 0.540059] pca953x 0-0077: failed reading register [ 0.540098] pca953x: probe of 0-0077 failed with error -121 [ 0.549119] max77620 4-003c: henry teset at max77620 [ 0.549137] henry test at max77620 611 [ 0.550110] max77620 4-003c: PMIC Version OTP:0x45 and ES:0x8 [ 0.553631] vddio-ddr: at 1125 mV [ 0.557535] avdd_dsi_csi: 1200 mV [ 0.561492] vdd-1v8: 1800 mV [ 0.565474] vdd-3v3-sys: 3300 mV [ 0.566316] spmic-ldo0: at 1800 mV [ 0.567013] spmic-ldo1: at 800 mV [ 0.569475] vddio-3v3: 3300 mV [ 0.570197] vddio-sdmmc1: 1800 <--> 3300 mV at 3300 mV [ 0.573476] vdd-rtc: at 800 mV [ 0.574100] avdd-ts-hv: 1800 <--> 3300 mV at 1800 mV [ 0.577475] spmic-ldo6: at 1500 mV [ 0.581476] vdd-pex-1v00: 1000 mV [ 0.582128] dvdd-pex: 1000 mV [ 0.584531] GPIO line 253 (spmic_gpio_input) hogged as input [ 0.584699] GPIO line 254 (spmic_gpio_input) hogged as input [ 0.584864] gpiochip_setup_dev: registered GPIOs 248 to 255 on device: gpiochip2 (max77620-gpio) [ 0.585087] max77620 4-003c: max77620 probe successful [ 0.585490] media: Linux media interface: v0.10 [ 0.585529] Linux video capture interface: v2.00 [ 0.589240] pps_core: LinuxPPS API ver. 1 registered [ 0.589256] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.589283] PTP clock support registered [ 0.589480] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.589697] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.589728] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.590978] trusty trusty: trusty version: Built: 12:20:14 Jul 26 2021 [ 0.591010] trusty trusty: selected api version: 3 (requested 3) [ 0.591810] Advanced Linux Sound Architecture Driver Initialized. [ 0.592146] Bluetooth: Core ver 2.22 [ 0.592185] NET: Registered protocol family 31 [ 0.592197] Bluetooth: HCI device and connection manager initialized [ 0.592212] Bluetooth: HCI socket layer initialized [ 0.592225] Bluetooth: L2CAP socket layer initialized [ 0.592247] Bluetooth: SCO socket layer initialized [ 0.592763] en-vdd-sd: 3300 mV [ 0.593162] vdd-usb0-5v: 5000 mV [ 0.593479] vdd-usb1-5v: 5000 mV [ 0.593961] vdd-3v3: 3300 mV [ 0.594205] en-vdd-vcm-2v8: 2800 mV [ 0.594451] vdd-sys-bl: 3300 mV [ 0.596497] camchar: rtcpu character device driver loaded [ 0.597039] gpio tegra-gpio wake53 for gpio=159(X:7) [ 0.598794] extcon-gpio-states external-connection:extcon@1: Cable state:1, cable id:1 [ 0.599610] clocksource: Switched to clocksource arch_sys_counter [ 0.621980] VFS: Disk quotas dquot_6.6.0 [ 0.622074] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.622339] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.622876] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000c6000000, size=0x2a000000 [ 0.623006] cma: enabled page replacement for spfn=c6000, epfn=f0000 [ 0.623023] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 0.623041] nvmap: nvmap_select_cache_ops() nvmap cache ops set to roc [ 0.623059] nvmap_page_pool_init: Total RAM pages: 2009867 [ 0.623071] nvmap_page_pool_init: nvmap page pool size: 251233 pages (981 MB) [ 0.623135] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.623668] misc nvmap: created heap vpr base 0x00000000c6000000 size (688128KiB) [ 0.625603] tegra-gpcdma 2600000.dma: GPC DMA driver register 32 channels [ 0.631170] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type BCPU-therm [ 0.631414] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type MCPU-therm [ 0.631884] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.631974] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.632093] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type Tboard_tegra [ 0.632211] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type Tdiode_tegra [ 0.632391] thermal thermal_zone6: Registering thermal zone thermal_zone6 for type PMIC-Die [ 0.632604] la/ptsa driver initialized. [ 0.632622] pre_t19x_iso_plat_init(): iso emc max clk=1866000KHz [ 0.632633] pre_t19x_iso_plat_init(): max_iso_bw=26870400KB [ 0.632947] NET: Registered protocol family 2 [ 0.633577] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.633911] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.634537] TCP: Hash tables configured (established 65536 bind 65536) [ 0.634594] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.634725] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.635070] NET: Registered protocol family 1 [ 0.635416] RPC: Registered named UNIX socket transport module. [ 0.635431] RPC: Registered udp transport module. [ 0.635443] RPC: Registered tcp transport module. [ 0.635454] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.635468] PCI: CLS 0 bytes, default 64 [ 0.635583] Trying to unpack rootfs image as initramfs... [ 0.651161] host1x 13e10000.host1x: initialized [ 0.652403] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.654491] audit: initializing netlink subsys (disabled) [ 0.654539] audit: type=2000 audit(0.532:1): initialized [ 0.654946] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.661546] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.662514] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.663027] 9p: Installing v9fs 9p2000 file system support [ 0.665177] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.665251] io scheduler noop registered [ 0.665471] io scheduler cfq registered (default) [ 0.668800] gic 2a41000.agic-controller: GIC IRQ controller registered [ 0.776302] iommu: Adding device aconnect@2a41000:adsp_audio to group 54 [ 0.811858] iommu: Adding device 2993000.adsp to group 55 [ 0.812940] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 0.815302] tegra-xusb-padctl 3520000.xusb_padctl: VBUS over-current detection enabled [ 0.818462] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.819666] tegra-pwm 3290000.pwm: PWM clk can sleep in ops [ 0.820747] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 0.821833] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.824134] tegra-pcie 10003000.pcie-controller: 4x1, 1x1 configuration [ 0.825159] tegra-pcie 10003000.pcie-controller: PCIE: Enable power rails [ 0.825527] tegra-pcie 10003000.pcie-controller: probing port 0, using 4 lanes [ 0.825625] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 0.825748] misc tegra_camera_ctrl: tegra_camera_isomgr_register tpg_max_iso = 3916800KBs [ 0.825769] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1000000, vi_iso_bw=750000, max_bw=3916800 [ 0.827796] tegra-pcie 10003000.pcie-controller: probing port 2, using 1 lanes [ 0.828984] tsec 15500000.tsec: initialized [ 0.830319] tsec 15100000.tsecb: initialized [ 0.833539] nvdec 15480000.nvdec: initialized [ 0.839397] falcon 15340000.vic: initialized [ 0.840805] falcon 154c0000.nvenc: initialized [ 0.842075] falcon 15380000.nvjpg: initialized [ 0.844095] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56) [ 0.845533] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57) [ 0.846968] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58) [ 0.848409] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59) [ 0.849822] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60) [ 0.851268] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61) [ 0.852721] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62) [ 0.854228] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63) [ 0.857514] tegradccommon 15200000.dc_common: host1x channel mapped [ 0.857536] tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated [ 0.857573] tegradccommon 15200000.dc_common: dma mapping done [ 0.857763] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=391 [ 0.858043] tegradc 15210000.nvdisplay: disp0 connected to head1->/host1x/sor1 [ 0.858101] generic_infoframe_type: 0x87 [ 0.858190] tegradc 15210000.nvdisplay: DT parsed successfully [ 0.858218] tegradc 15210000.nvdisplay: Display dc.ffffff800b3a0000 registered with id=0 [ 0.858488] tegra_cec 3960000.tegra_cec: Unpowergate DISP: 0. [ 0.859288] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 0.859313] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 0.859480] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 0.859495] tegra_cec 3960000.tegra_cec: probed [ 0.863567] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 16727000 KB/s [ 0.863589] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 665600000 Hz [ 0.863623] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 357620000 Hz [ 0.863821] tegradc 15210000.nvdisplay: vblank syncpt # 8 for dc 1 [ 0.863839] tegradc 15210000.nvdisplay: vpulse3 syncpt # 9 for dc 1 [ 0.864609] tegradc 15210000.nvdisplay: dc_hdmi_hotplug_init: couldn't get regulator vdd_hdmi_5v0, -517 [ 0.870072] tegradc 15210000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board [ 0.870093] tegradc 15210000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 0.873934] tegra-i2c 3190000.i2c: arb lost in communicate to add 0x50 [ 0.874079] tegra-i2c 3190000.i2c: Un-recovered Arb lost [ 0.875138] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 32 channels [ 0.876512] tegra-fuse-burn 3820000.efuse:efuse-burn: shutdown limit check disabled [ 0.876558] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized [ 0.877014] kfuse 3830000.kfuse: initialized [ 0.877485] tegradc 15210000.nvdisplay: probed [ 0.877832] Console: switching to colour frame buffer device 80x30 [ 0.877863] tegradc 15210000.nvdisplay: fb registered [ 0.878045] gpio tegra-gpio wake21 for gpio=121(P:1) [ 0.878494] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 0.878889] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 0.878982] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 0.879072] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 0.881460] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.886903] Parent Clock set for DC plld2 [ 0.887204] console [ttyS0] disabled [ 0.887245] 3100000.serial: ttyS0 at MMIO 0x3100000 (irq = 36, base_baud = 25500000) is a Tegra [ 0.890028] edid invalid [ 0.890746] tegradc 15210000.nvdisplay: hdmi: tmds rate:25200K prod-setting:prod_c_hdmi_0m_54m [ 0.891995] tegradc 15210000.nvdisplay: hdmi: get YCC quant from EDID. [ 0.895443] tegra-i2c 3190000.i2c: arb lost in communicate to add 0x50 [ 0.895569] tegra-i2c 3190000.i2c: Un-recovered Arb lost [ 0.899190] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 0.899192] Extcon AUX1(HDMI) enable [ 1.006967] tegra-i2c 3190000.i2c: arb lost in communicate to add 0x50 [ 1.007095] tegra-i2c 3190000.i2c: Un-recovered Arb lost [ 1.010930] tegra-i2c 3190000.i2c: arb lost in communicate to add 0x50 [ 1.011057] tegra-i2c 3190000.i2c: Un-recovered Arb lost [ 1.014856] tegra-i2c 3190000.i2c: arb lost in communicate to add 0x50 [ 1.014982] tegra-i2c 3190000.i2c: Un-recovered Arb lost [ 1.018776] tegra-i2c 3190000.i2c: arb lost in communicate to add 0x50 [ 1.018902] tegra-i2c 3190000.i2c: Un-recovered Arb lost [ 1.022708] tegra-i2c 3190000.i2c: arb lost in communicate to add 0x50 [ 1.022834] tegra-i2c 3190000.i2c: Un-recovered Arb lost [ 1.026650] tegra-i2c 3190000.i2c: arb lost in communicate to add 0x50 [ 1.026776] tegra-i2c 3190000.i2c: Un-recovered Arb lost [ 1.030583] tegra-i2c 3190000.i2c: arb lost in communicate to add 0x50 [ 1.030709] tegra-i2c 3190000.i2c: Un-recovered Arb lost [ 1.034519] tegra-i2c 3190000.i2c: arb lost in communicate to add 0x50 [ 1.034644] tegra-i2c 3190000.i2c: Un-recovered Arb lost [ 1.038455] tegra-i2c 3190000.i2c: arb lost in communicate to add 0x50 [ 1.038582] tegra-i2c 3190000.i2c: Un-recovered Arb lost [ 1.042391] tegra-i2c 3190000.i2c: arb lost in communicate to add 0x50 [ 1.042517] tegra-i2c 3190000.i2c: Un-recovered Arb lost [ 1.043009] tegradc 15210000.nvdisplay: hdmi: edid read failed [ 1.043057] tegradc 15210000.nvdisplay: hdmi: using fallback edid [ 1.252246] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 1.656575] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 1.883618] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 1.948134] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 1.948137] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 2.060603] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 2.062619] tegra-pcie 10003000.pcie-controller: link 0 down, ignoring [ 2.464747] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 2.868891] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 3.273027] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 3.275043] tegra-pcie 10003000.pcie-controller: link 2 down, ignoring [ 3.474055] console [ttyS0] enabled [ 3.474057] tegradc 15210000.nvdisplay: blank - powerdown [ 3.475573] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 37, base_baud = 0) is a TEGRA_UART [ 3.476520] c280000.serial: ttyTHS2 at MMIO 0xc280000 (irq = 38, base_baud = 0) is a TEGRA_UART [ 3.476687] serial-tegra 3130000.serial: RX in PIO mode [ 3.477467] 3130000.serial: ttyTHS3 at MMIO 0x3130000 (irq = 39, base_baud = 0) is a TEGRA_UART [ 3.478500] [drm] Initialized [ 3.479965] tegra-pcie 10003000.pcie-controller: PCIE: no end points detected [ 3.480216] tegra-pcie 10003000.pcie-controller: PCIE: Disable power rails [ 3.496382] brd: module loaded [ 3.499812] loop: module loaded [ 3.499885] tegra_profiler: version: 1.145, samples/io: 49/28 [ 3.499986] tegra_profiler: auth: init [ 3.500360] nct1008_nct72 7-004c: starting parse dt [ 3.500455] nct1008_nct72 7-004c: !!!Found deprecated property!!! [ 3.500458] nct1008_nct72 7-004c: success parsing dt [ 3.500558] nct1008_nct72 7-004c: success in enabling tmp451 VDD rail [ 3.501248] THERMAL EST: found 3 subdevs [ 3.501251] THERMAL EST num_resources: 0 [ 3.501254] [THERMAL EST subdev 0] [ 3.501258] [THERMAL EST subdev 1] [ 3.501261] [THERMAL EST subdev 2] [ 3.501501] thermal thermal_zone7: Registering thermal zone thermal_zone7 for type thermal-fan-est [ 3.501502] THERMAL EST: thz register success. [ 3.501589] THERMAL EST: end of probe, return err: 0 [ 3.502198] sd: No Scsi addr parsed to reserve index [ 3.502221] hisi_sas: driver version v1.6 [ 3.505790] tegra-ahci 3507000.ahci-sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode [ 3.505796] tegra-ahci 3507000.ahci-sata: flags: 64bit ncq sntf pm led pmp pio slum part deso sadm apst [ 3.506505] scsi host0: tegra_ahci [ 3.506865] scsi host1: tegra_ahci [ 3.507007] ata1: SATA max UDMA/133 mmio [mem 0x03507000-0x03508fff] port 0x100 irq 24 [ 3.507009] ata2: DUMMY [ 3.508911] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 3.508913] Extcon AUX1(HDMI) disable [ 3.512352] libphy: Fixed MDIO Bus: probed [ 3.512780] tun: Universal TUN/TAP device driver, 1.6 [ 3.512781] tun: (C) 1999-2004 Max Krasnyansky [ 3.513601] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 3.513603] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 3.513641] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 3.513642] igb: Copyright (c) 2007-2014 Intel Corporation. [ 3.513679] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 3.513680] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 3.513711] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k [ 3.513713] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 3.519702] eqos 2490000.ether_qos: can't get pllrefe_vcoout clk (-2) [ 3.522237] eqos 2490000.ether_qos: failed to read eqos_auto_cal_config_0_reg [ 3.522722] eqos 2490000.ether_qos: Setting local MAC: 48 b0 2d 48 5a 27 [ 3.522753] Using phyrst_lpmode = 0 from DT [ 3.522823] libphy: dwc_phy: probed [ 3.523111] bcm54xx_low_power_mode(): put phy in iddq-lp mode [ 3.525232] PPP generic driver version 2.4.2 [ 3.525351] PPP BSD Compression module registered [ 3.525353] PPP Deflate Compression module registered [ 3.525366] PPP MPPE Compression module registered [ 3.525370] NET: Registered protocol family 24 [ 3.525412] usbcore: registered new interface driver r8152 [ 3.525442] usbcore: registered new interface driver asix [ 3.525477] usbcore: registered new interface driver ax88179_178a [ 3.525506] usbcore: registered new interface driver cdc_ether [ 3.525533] usbcore: registered new interface driver net1080 [ 3.525559] usbcore: registered new interface driver cdc_subset [ 3.525583] usbcore: registered new interface driver zaurus [ 3.525619] usbcore: registered new interface driver cdc_ncm [ 3.525719] VFIO - User Level meta-driver version: 0.3 [ 3.526550] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.526560] ehci-pci: EHCI PCI platform driver [ 3.526588] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.526594] ohci-pci: OHCI PCI platform driver [ 3.526622] ohci-platform: OHCI generic platform driver [ 3.536273] nct1008_nct72 7-004c: LOC shutdown limit 107 [ 3.536780] nct1008_nct72 7-004c: EXT shutdown limit 107 [ 3.537913] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 3.538908] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 3.544989] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 3.547458] tegra-xusb 3530000.xhci: USB2 port 0 has OTG_CAP [ 3.561703] tegra-xusb 3530000.xhci: extcon 0: ffffffc1eb0f2000 id [ 3.563087] tegra-xusb 3530000.xhci: Direct firmware load for tegra18x_xusb_firmware failed with error -2 [ 3.563098] tegra-xusb 3530000.xhci: Falling back to user helper [ 3.572494] usbcore: registered new interface driver uas [ 3.572889] nct1008_nct72 7-004c: initial LOC temp: 37000 [ 3.572912] usbcore: registered new interface driver usb-storage [ 3.573871] usbcore: registered new interface driver usbserial [ 3.574493] nct1008_nct72 7-004c: initial EXT temp: 39250 [ 3.575795] nct1008_nct72 7-004c: hi_b:-11, lo_b:0 [ 3.577081] gpio tegra-gpio-aon wake35 for gpio=16(V:0) [ 3.578315] nct1008_nct72 7-004c: nct1008_probe: initialized [ 3.629954] tegra-xudc-new 3550000.xudc: device count: 1 [ 3.639105] tegra-xudc-new 3550000.xudc: vbus state: 1 [ 3.983779] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.984563] ata1.00: ATA-10: FORESEE 64GB SSD, V4.6, max UDMA/133 [ 3.984581] ata1.00: 125045424 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 3.985132] ata1.00: configured for UDMA/133 [ 3.998821] scsi 0:0:0:0: Direct-Access ATA FORESEE 64GB SSD V4.6 PQ: 0 ANSI: 5 [ 4.038686] sd 0:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB) [ 4.039364] sd 0:0:0:0: [sda] Write Protect is off [ 4.039381] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.039570] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.045106] sda: sda1 < sda5 > [ 4.048627] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.175831] tegra-xusb-padctl 3520000.xusb_padctl: tegra186_xusb_padctl_utmi_pad_dcd: DCD timeout 418 ms [ 4.225058] tegra-usb-cd usb_cd: notification status (0x0, 0x1) [ 4.225073] tegra-usb-cd usb_cd: connected to SDP [ 4.225170] tegra-xudc-new 3550000.xudc: device mode on: 0 [ 4.226278] tegra-xudc-new 3550000.xudc: active: 0 => 1 [ 4.232148] mousedev: PS/2 mouse device common for all mice [ 4.232981] usbcore: registered new interface driver xpad [ 4.314176] tegradc 15210000.nvdisplay: unblank [ 4.319310] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 4.319931] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 4.320481] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 4.333406] Parent Clock set for DC plld2 [ 4.336740] tegradc 15210000.nvdisplay: hdmi: tmds rate:74250K prod-setting:prod_c_hdmi_54m_111m [ 4.338004] tegradc 15210000.nvdisplay: hdmi: get YCC quant from EDID. [ 4.341445] tegra-i2c 3190000.i2c: arb lost in communicate to add 0x50 [ 4.341575] tegra-i2c 3190000.i2c: Un-recovered Arb lost [ 4.345340] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 4.345342] Extcon AUX1(HDMI) enable [ 4.354789] tegradc 15210000.nvdisplay: sync windows ret = 248 [ 4.371947] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 4.372947] Wake73 for irq=42 [ 4.374181] rtc rtc1: alarm rtc device [ 4.374192] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ 4.374207] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 4.374405] i2c /dev entries driver [ 4.375662] ov9281 2-0060: probing v4l2 sensor. [ 4.375665] ov9281 2-0060: henry hello test debug tttttttt test2022. [ 4.375666] henry debug line1156 [ 4.375700] henry debug line1171 [ 4.375701] henry debug line1176 [ 4.375824] henry debug line1156 [ 4.375825] henry debug line1232 [ 4.386340] henry debug line1228 [ 4.386344] ov9281 2-0060: henry test on camera common init line999. [ 4.386381] extract_pixel_format: henry debug formatyuv_grey8 [ 4.386411] henry debug line1234 [ 4.386414] henry debug line1238 [ 4.386417] ov9281 2-0060: ov9281_ctrls_init++ [ 4.386433] henry debug line1243 [ 4.386434] henry debug new line1248 [ 4.386689] tegra-i2c 3180000.i2c: no acknowledge from address 0x60 [ 4.386719] ov9281 2-0060: Failed to read chip ID [ 4.386720] henry debug line1123 [ 4.386726] ov9281 2-0060: ov9281_power_off: power off [ 4.386802] tegra-i2c 3180000.i2c: no acknowledge from address 0x60 [ 4.386881] regmap_util_write_table_8:regmap_util_write_table:-121 [ 4.386881] ov9281: probe of 2-0060 failed with error -121 [ 4.387569] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 4.392154] parse_throttle_dt_data: Num cap clks = 4 [ 4.392157] parse_throttle_dt_data: clk=mcpu type=1 [ 4.392159] parse_throttle_dt_data: clk=bcpu type=2 [ 4.392165] parse_throttle_dt_data: clk=gpu type=4 [ 4.392167] parse_throttle_dt_data: clk=emc type=3 [ 4.393216] tegra_throttle_probe: probe successful. #cdevs=4 [ 4.393749] FAN: coudln't get the regulator [ 4.394254] tegra-oc-event d280000.soctherm-oc-event: OC driver initialized [ 4.395218] device-mapper: uevent: version 1.0.3 [ 4.395537] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 4.395811] CPU EMC frequency mapping table: from device tree [ 4.399991] cpufreq: platform driver Initialization: pass [ 4.401833] cpuidle: Initializing cpuidle driver init for Denver cluster [ 4.401949] cpuidle: Initializing cpuidle driver init for A57 cluster [ 4.407651] sdhci: Secure Digital Host Controller Interface driver [ 4.407652] sdhci: Copyright(c) Pierre Ossman [ 4.407653] sdhci-pltfm: SDHCI platform and OF driver helper [ 4.408857] sdhci-tegra 3460000.sdhci: Client registration for eMC Successful [ 4.410611] CMDQ: cmdq_platfm_init successful [ 4.411630] CQE: CMD_TIMING bit set for R1B DCMD [ 4.414150] sdhci-tegra 3440000.sdhci: Client registration for eMC Successful [ 4.419760] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 4.419811] sdhci-tegra 3400000.sdhci: Got WP GPIO [ 4.421497] sdhci-tegra 3400000.sdhci: Client registration for eMC Successful [ 4.423198] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 258 [ 4.427940] tegra-se-nvhost 15810000.se: initialized [ 4.429037] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 4.429637] tegra-se-nvhost 15820000.se: initialized [ 4.430540] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 4.431074] tegra-se-nvhost 15830000.se: initialized [ 4.431876] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 4.432429] tegra-se-nvhost 15840000.se: initialized [ 4.433341] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 4.434103] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.434298] hidraw: raw HID events driver (C) Jiri Kosina [ 4.436160] usbcore: registered new interface driver usbhid [ 4.436162] usbhid: USB HID core driver [ 4.441752] tegra186-cam-rtcpu b000000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 4.443849] tegra-ivc ivc-b000000.rtcpu: region 0: iova=0xbfef0000-0xbfefdb7f size=56192 [ 4.444089] tegra-ivc ivc-b000000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.444210] tegra-ivc ivc-b000000.rtcpu:i2c@480: i2c: ver=0 grp=1 RX[8x128]=0x1900-0x1d80 TX[8x128]=0x1d80-0x2200 [ 4.444392] tegra-ivc ivc-b000000.rtcpu:vinotify@12c0: vinotify: ver=0 grp=1 RX[64x128]=0x2200-0x4280 TX[64x128]=0x4280-0x6300 [ 4.445233] tegra-ivc ivc-b000000.rtcpu:mods@32c0: mods: ver=0 grp=1 RX[1x64]=0x6300-0x63c0 TX[1x64]=0x63c0-0x6480 [ 4.445308] tegra-ivc ivc-b000000.rtcpu:ivccontrol@52c0: ivccontrol: ver=0 grp=1 RX[16x320]=0x6480-0x7900 TX[16x320]=0x7900-0x8d80 [ 4.445358] tegra-ivc ivc-b000000.rtcpu:ivccapture@72c0: ivccapture: ver=0 grp=1 RX[16x64]=0x8d80-0x9200 TX[16x64]=0x9200-0x9680 [ 4.445405] tegra-ivc ivc-b000000.rtcpu:dbg@7c00: dbg: ver=0 grp=1 RX[1x384]=0x9680-0x9880 TX[1x384]=0x9880-0x9a80 [ 4.445508] tegra-ivc ivc-b000000.rtcpu:dbg@7e00: dbg: ver=0 grp=1 RX[1x8192]=0x9a80-0xbb00 TX[1x8192]=0xbb00-0xdb80 [ 4.445829] tegra186-cam-rtcpu b000000.rtcpu: using cam RTCPU IRQ (52) [ 4.445831] tegra186-cam-rtcpu b000000.rtcpu: tegra_camrtc_mon_create is successful [ 4.446257] tegra186-cam-rtcpu b000000.rtcpu: firmware version cpu=sce cmd=5 sha1=c73bbe92930645be44530c166eb578bfbb9499c3 [ 4.447925] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.448351] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.448724] register_ari_mca_banks: Registered MCA ROC:IOB [ 4.449009] register_ari_mca_banks: Registered MCA ROC:CCE [ 4.449694] tegra18-bridge 2390000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.449696] tegra18-bridge 2390000.axi2apb: enabled timeout = 11155000 [ 4.449698] tegra18-bridge 2390000.axi2apb: bridge probed OK [ 4.449759] tegra18-bridge 23a0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.449760] tegra18-bridge 23a0000.axi2apb: enabled timeout = 11155000 [ 4.449762] tegra18-bridge 23a0000.axi2apb: bridge probed OK [ 4.449809] tegra18-bridge 23b0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.449811] tegra18-bridge 23b0000.axi2apb: enabled timeout = 11155000 [ 4.449813] tegra18-bridge 23b0000.axi2apb: bridge probed OK [ 4.449863] tegra18-bridge 23c0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.449865] tegra18-bridge 23c0000.axi2apb: enabled timeout = 11155000 [ 4.449867] tegra18-bridge 23c0000.axi2apb: bridge probed OK [ 4.449913] tegra18-bridge 23d0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.449915] tegra18-bridge 23d0000.axi2apb: enabled timeout = 11155000 [ 4.449916] tegra18-bridge 23d0000.axi2apb: bridge probed OK [ 4.449961] tegra18-bridge 2100000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.449965] tegra18-bridge 2100000.axip2p: enabled timeout = 11155000 [ 4.449967] tegra18-bridge 2100000.axip2p: bridge probed OK [ 4.450011] tegra18-bridge 2110000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.450016] tegra18-bridge 2110000.axip2p: enabled timeout = 11155000 [ 4.450017] tegra18-bridge 2110000.axip2p: bridge probed OK [ 4.450062] tegra18-bridge 2120000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.450066] tegra18-bridge 2120000.axip2p: enabled timeout = 11155000 [ 4.450067] tegra18-bridge 2120000.axip2p: bridge probed OK [ 4.450112] tegra18-bridge 2130000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.450116] tegra18-bridge 2130000.axip2p: enabled timeout = 11155000 [ 4.450118] tegra18-bridge 2130000.axip2p: bridge probed OK [ 4.450163] tegra18-bridge 2140000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.450165] tegra18-bridge 2140000.axip2p: enabled timeout = 11155000 [ 4.450167] tegra18-bridge 2140000.axip2p: bridge probed OK [ 4.450212] tegra18-bridge 2150000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.450216] tegra18-bridge 2150000.axip2p: enabled timeout = 11155000 [ 4.450218] tegra18-bridge 2150000.axip2p: bridge probed OK [ 4.450267] tegra18-bridge 2160000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.450272] tegra18-bridge 2160000.axip2p: enabled timeout = 11155000 [ 4.450273] tegra18-bridge 2160000.axip2p: bridge probed OK [ 4.450318] tegra18-bridge 2170000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.450322] tegra18-bridge 2170000.axip2p: enabled timeout = 11155000 [ 4.450324] tegra18-bridge 2170000.axip2p: bridge probed OK [ 4.450371] tegra18-bridge 2180000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.450375] tegra18-bridge 2180000.axip2p: enabled timeout = 11155000 [ 4.450377] tegra18-bridge 2180000.axip2p: bridge probed OK [ 4.450430] tegra18-bridge 2190000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.450434] tegra18-bridge 2190000.axip2p: enabled timeout = 11155000 [ 4.450435] tegra18-bridge 2190000.axip2p: bridge probed OK [ 4.450492] **** A57 ECC: Enabled [ 4.450494] tegra18_a57_serr_init: on CPU 3 a A57 Core [ 4.450553] tegra18x_actmon d230000.actmon: in actmon_register()... [ 4.451001] tegra18x_actmon d230000.actmon: initialization Completed for the device mc_all [ 4.451408] hw perfevents: enabled with denver15_uncore_pmu PMU driver, 3 counters available [ 4.451525] denver_knobs_init:MTS_VERSION:53679346 [ 4.451618] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit with 64 bit addr [ 4.453499] nvpmodel: initialized successfully [ 4.460209] trusty-virtio trusty:virtio: initializing [ 4.460308] trusty_ipc virtio0: vring0: va(pa) ffffffc1e9f6c000(0) qsz 32 notifyid 1 [ 4.460315] trusty_ipc virtio0: vring1: va(pa) ffffffc1e9f6e000(0) qsz 32 notifyid 2 [ 4.460375] trusty-virtio trusty:virtio: initializing done [ 4.461642] usbcore: registered new interface driver snd-usb-audio [ 4.462511] tlv320aic32x4 1-0018: henry debug aic3204 enter [ 4.462514] tlv320aic32x4 1-0018: henry debug aic3204 line972 [ 4.462519] tlv320aic32x4 1-0018: henry debug aic3204 leave [ 4.463464] trusty_ipc virtio0: is online [ 4.463620] mmc1: SDHCI controller on 3440000.sdhci [3440000.sdhci] using ADMA 64-bit with 64 bit addr [ 4.471830] gpio tegra-gpio wake71 for gpio=125(P:5) [ 4.471881] mmc2: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit with 64 bit addr [ 4.478575] input: tegra-hda HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input0 [ 4.478700] input: tegra-hda HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input1 [ 4.484867] OPE platform probe [ 4.484937] OPE platform probe successful [ 4.497325] mmc0: mmc_decode_ext_csd: CMDQ supported: depth: 31, cmdq_support: 1 [ 4.511757] mmc0: periodic cache flush enabled [ 4.511771] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 4.512155] mmcblk0: mmc0:0001 DG4032 29.1 GiB [ 4.512247] mmcblk0boot0: mmc0:0001 DG4032 partition 1 4.00 MiB [ 4.512365] mmcblk0boot1: mmc0:0001 DG4032 partition 2 4.00 MiB [ 4.516478] mmcblk0rpmb: mmc0:0001 DG4032 partition 3 4.00 MiB [ 4.521291] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 [ 4.529142] henry debug aic3204 codec probe enter!!!!!!!!!!!!! [ 4.532518] henry debug aic3204 codec probe leave!!!!!!!!!!!!! [ 4.550240] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 4.550315] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 4.550388] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 4.550459] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 4.550536] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 4.550600] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 4.550667] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 4.550734] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 4.550801] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 4.550873] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 4.550941] tegra-asoc: sound: ADMAIF11 <-> ADMAIF11 mapping ok [ 4.551007] tegra-asoc: sound: ADMAIF12 <-> ADMAIF12 mapping ok [ 4.551075] tegra-asoc: sound: ADMAIF13 <-> ADMAIF13 mapping ok [ 4.551141] tegra-asoc: sound: ADMAIF14 <-> ADMAIF14 mapping ok [ 4.551220] tegra-asoc: sound: ADMAIF15 <-> ADMAIF15 mapping ok [ 4.551286] tegra-asoc: sound: ADMAIF16 <-> ADMAIF16 mapping ok [ 4.551351] tegra-asoc: sound: ADMAIF17 <-> ADMAIF17 mapping ok [ 4.551420] tegra-asoc: sound: ADMAIF18 <-> ADMAIF18 mapping ok [ 4.551488] tegra-asoc: sound: ADMAIF19 <-> ADMAIF19 mapping ok [ 4.551563] tegra-asoc: sound: ADMAIF20 <-> ADMAIF20 mapping ok [ 4.554204] tegra-asoc: sound: henry debug tlv320aic_init enter! [ 4.554206] tegra-asoc: sound: henry debug tlv320aic_init leave! [ 4.559915] tegra-asoc: sound: ASoC: no source widget found for x OUT [ 4.559917] tegra-asoc: sound: ASoC: Failed to add route x OUT -> direct -> x Headphone [ 4.559936] tegra-asoc: sound: ASoC: no sink widget found for x IN [ 4.559938] tegra-asoc: sound: ASoC: Failed to add route x Mic -> direct -> x IN [ 4.578528] u32 classifier [ 4.578530] Actions configured [ 4.578588] Initializing XFRM netlink socket [ 4.579117] NET: Registered protocol family 10 [ 4.583693] NET: Registered protocol family 17 [ 4.583702] NET: Registered protocol family 15 [ 4.583761] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.583810] Bluetooth: RFCOMM socket layer initialized [ 4.583819] Bluetooth: RFCOMM ver 1.11 [ 4.583822] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.583826] Bluetooth: HIDP socket layer initialized [ 4.583840] 9pnet: Installing 9P2000 support [ 4.583868] Key type dns_resolver registered [ 4.586305] Registered cp15_barrier emulation handler [ 4.587085] Registered setend emulation handler [ 4.587961] registered taskstats version 1 [ 4.604705] isp 15600000.isp: initialized [ 4.638409] nvcsi 150c0000.nvcsi: initialized [ 4.644418] Wake83 for irq=51 [ 4.644491] gpio tegra-gpio-aon wake29 for gpio=56(FF:0) [ 4.644565] gpio tegra-gpio-aon wake67 for gpio=57(FF:1) [ 4.644642] gpio tegra-gpio-aon wake68 for gpio=58(FF:2) [ 4.644767] input: gpio-keys as /devices/gpio-keys/input/input2 [ 4.645398] tegra-vi4 15700000.vi: using default number of vi channels,15 [ 4.675054] tegra-vi4 15700000.vi: initialized [ 4.681210] tegra-vi4 15700000.vi: subdev 150c0000.nvcsi--1 bound [ 4.690528] tegra_rtc c2a0000.rtc: setting system clock to 2000-01-02 04:08:02 UTC (946786082) [ 4.691849] mmcblk mmc0:0001: Card claimed for testing. [ 4.706516] mmc1: Applying tuning correction [ 4.706527] mmc1: Tap value after applying correction 60 [ 4.706533] mmc1: hw tuning done ... [ 4.710049] mmc1: new ultra high speed SDR104 SDIO card at address 0001 [ 4.721256] bpmp: mounted debugfs mirror [ 4.722433] bwmgr: missing cdev-type property [ 4.728053] ALSA device list: [ 4.728055] #0: tegra-hda at 0x3518000 irq 384 [ 4.728057] #1: tegra-snd-t186ref-mobile-rt565x [ 6.708254] extcon-disp-state external-connection:disp-state: cable 51 state 1 [ 6.716372] Extcon HDMI: HPD enabled [ 6.720852] tegradc 15210000.nvdisplay: hdmi: plugged [ 6.722936] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 6.722951] VFS: Mounted root (ext4 filesystem) on device 179:1. [ 6.727932] devtmpfs: mounted [ 6.730092] Freeing unused kernel memory: 8448K [ 6.906457] systemd[1]: System time before build time, advancing clock. [ 6.978850] ip_tables: (C) 2000-2006 Netfilter Core Team [ 6.994472] cgroup: cgroup2: unknown option "nsdelegate" [ 7.020506] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 7.058932] systemd[1]: Detected architecture arm64. [ 7.088358] systemd[1]: Set hostname to . [ 7.182046] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 7.201286] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 7.350253] random: systemd: uninitialized urandom read (16 bytes read) [ 7.358112] systemd[1]: Reached target User and Group Name Lookups. [ 7.367121] random: systemd: uninitialized urandom read (16 bytes read) [ 7.375089] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 7.385255] random: systemd: uninitialized urandom read (16 bytes read) [ 7.394402] systemd[1]: Created slice User and Session Slice. [ 7.404315] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 7.416588] systemd[1]: Reached target Swap. [ 7.477445] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 7.675317] systemd-journald[2252]: Received request to flush runtime journal from PID 1 [ 7.983621] random: crng init done [ 7.987911] random: 7 urandom warning(s) missed due to ratelimiting [ 8.332730] tegra-xusb 3530000.xhci: cannot find firmware....retry after 1 second [ 8.459203] bcpu-throttle-alert cooling device registered. [ 8.461760] mcpu-throttle-alert cooling device registered. [ 8.464276] gpu-throttle-alert cooling device registered. [ 8.468140] gpio tegra-gpio-aon wake30 for gpio=60(FF:4) [ 8.767273] dhd_module_init in [ 8.767393] found wifi platform device bcmdhd_wlan [ 8.792504] wifi_platform_get_country_code_map: could not get country_code_map [ 8.792510] wifi_plat_dev_drv_probe:platform country code map is not available [ 8.792527] Power-up adapter 'DHD generic adapter' [ 8.792535] wifi_platform_set_power = 1 [ 8.999639] wifi_platform_bus_enumerate device present 1 [ 9.025792] wifi_platform_bus_enumerate device present 0 [ 9.026460] F1 signature read @0x18000000=0x17214354 [ 9.032149] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x1 pkg:0x2 [ 9.033273] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000 [ 9.033362] wifi_platform_get_mac_addr [ 9.035825] ids dhd_log_netlink_init [ 9.040646] wl_create_event_handler(): thread:wl_event_handler:1000 started [ 9.040651] wl_event_handler : [ 9.040654] tsk Enter, tsk = 0xffffffc1ddd01a90 [ 9.041615] dhd_attach(): thread:dhd_watchdog_thread:1005 started [ 9.043674] dhd_attach(): thread:dhd_dpc:1006 started [ 9.044139] dhd_attach(): thread:dhd_rxf:1007 started [ 9.044147] dhd_deferred_work_init: work queue initialized [ 9.044503] Dongle Host Driver, version 1.201.82 (r) Compiled from [ 9.047574] Register interface [wlan0] MAC: 48:b0:2d:48:5a:25 [ 9.047579] dhd_prot_ioctl : bus is down. we have nothing to do [ 9.047789] sdhci-tegra 3440000.sdhci: Tuning done, restoring the best tap value : 60 [ 9.048831] wifi_platform_set_power = 0 [ 9.343632] tegra-xusb 3530000.xhci: Firmware timestamp: 2020-07-06 13:39:28 UTC, Version: 55.18 release [ 9.399656] tegra-xusb 3530000.xhci: xHCI Host Controller [ 9.399673] tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 1 [ 9.400392] tegra-xusb 3530000.xhci: hcc params 0x0184fd25 hci version 0x100 quirks 0x00050810 [ 9.400420] tegra-xusb 3530000.xhci: irq 71, io mem 0x03530000 [ 9.400539] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 9.400541] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.400543] usb usb1: Product: xHCI Host Controller [ 9.400545] usb usb1: Manufacturer: Linux 4.9.253 xhci-hcd [ 9.400547] usb usb1: SerialNumber: 3530000.xhci [ 9.400912] hub 1-0:1.0: USB hub found [ 9.400969] hub 1-0:1.0: 4 ports detected [ 9.401249] tegra-xusb 3530000.xhci: xHCI Host Controller [ 9.401255] tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 2 [ 9.403554] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 9.403557] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.403560] usb usb2: Product: xHCI Host Controller [ 9.403562] usb usb2: Manufacturer: Linux 4.9.253 xhci-hcd [ 9.403564] usb usb2: SerialNumber: 3530000.xhci [ 9.404045] hub 2-0:1.0: USB hub found [ 9.404100] hub 2-0:1.0: 3 ports detected [ 9.409541] Wake76 for irq=199 [ 9.409544] Wake77 for irq=199 [ 9.409546] Wake78 for irq=199 [ 9.409547] Wake79 for irq=199 [ 9.409548] Wake80 for irq=199 [ 9.409549] Wake81 for irq=199 [ 9.409551] Wake82 for irq=199 [ 9.409587] tegra-xusb 3530000.xhci: Upgrade port 0 to USB3.0 [ 9.409591] tegra-xusb 3530000.xhci: Upgrade port 1 to USB3.0 [ 9.559845] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 9.627967] usb 2-1: new SuperSpeed USB device number 2 using tegra-xusb [ 9.647981] usb 2-1: New USB device found, idVendor=0451, idProduct=8140 [ 9.647987] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 9.650926] hub 2-1:1.0: USB hub found [ 9.650984] hub 2-1:1.0: 4 ports detected [ 9.767635] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 9.788110] usb 1-2: New USB device found, idVendor=0451, idProduct=8142 [ 9.788115] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=1 [ 9.788118] usb 1-2: SerialNumber: A20F0861A4CD [ 9.788800] hub 1-2:1.0: USB hub found [ 9.788874] hub 1-2:1.0: 4 ports detected [ 9.940119] usb 2-1.3: new SuperSpeed USB device number 3 using tegra-xusb [ 9.962797] usb 2-1.3: New USB device found, idVendor=05e3, idProduct=0612 [ 9.962803] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 9.962806] usb 2-1.3: Product: USB3.1 Hub [ 9.962809] usb 2-1.3: Manufacturer: GenesysLogic [ 9.964017] hub 2-1.3:1.0: USB hub found [ 9.964347] hub 2-1.3:1.0: 4 ports detected [ 10.075651] usb 1-2.3: new high-speed USB device number 3 using tegra-xusb [ 10.087636] usb 2-1.3: usb_suspend_both: status 0 [ 10.098199] usb 1-2.3: New USB device found, idVendor=05e3, idProduct=0610 [ 10.098205] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 10.098208] usb 1-2.3: Product: USB2.0 Hub [ 10.098210] usb 1-2.3: Manufacturer: GenesysLogic [ 10.098987] hub 1-2.3:1.0: USB hub found [ 10.099242] hub 1-2.3:1.0: 4 ports detected [ 10.135642] usb 2-1: usb_suspend_both: status 0 [ 10.135765] usb usb2: usb_suspend_both: status 0 [ 10.183651] usb 1-2.4: new high-speed USB device number 4 using tegra-xusb [ 10.206104] usb 1-2.4: New USB device found, idVendor=0424, idProduct=9e00 [ 10.206110] usb 1-2.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 10.389679] using random self ethernet address [ 10.395633] usb 1-2.3.2: new low-speed USB device number 5 using tegra-xusb [ 10.401977] using random host ethernet address [ 10.424172] usb 1-2.3.2: New USB device found, idVendor=03f0, idProduct=2f4a [ 10.424178] usb 1-2.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 10.424181] usb 1-2.3.2: Product: HP Business Slim Keyboard [ 10.424184] usb 1-2.3.2: Manufacturer: Chicony [ 10.429013] input: Chicony HP Business Slim Keyboard as /devices/3530000.xhci/usb1/1-2/1-2.3/1-2.3.2/1-2.3.2:1.0/0003:03F0:2F4A.0001/input/input3 [ 10.488227] hid-generic 0003:03F0:2F4A.0001: input,hidraw0: USB HID v1.10 Keyboard [Chicony HP Business Slim Keyboard] on usb-3530000.xhci-2.3.2/input0 [ 10.498564] input: Chicony HP Business Slim Keyboard as /devices/3530000.xhci/usb1/1-2/1-2.3/1-2.3.2/1-2.3.2:1.1/0003:03F0:2F4A.0002/input/input4 [ 10.555882] hid-generic 0003:03F0:2F4A.0002: input,hidraw1: USB HID v1.10 Device [Chicony HP Business Slim Keyboard] on usb-3530000.xhci-2.3.2/input1 [ 10.639661] usb 1-2.3.3: new low-speed USB device number 6 using tegra-xusb [ 10.664494] usb 1-2.3.3: New USB device found, idVendor=03f0, idProduct=134a [ 10.664500] usb 1-2.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 10.664503] usb 1-2.3.3: Product: HP USB Optical Mouse [ 10.664506] usb 1-2.3.3: Manufacturer: PixArt [ 10.667168] input: PixArt HP USB Optical Mouse as /devices/3530000.xhci/usb1/1-2/1-2.3/1-2.3.3/1-2.3.3:1.0/0003:03F0:134A.0003/input/input5 [ 10.667439] hid-generic 0003:03F0:134A.0003: input,hidraw2: USB HID v1.11 Mouse [PixArt HP USB Optical Mouse] on usb-3530000.xhci-2.3.3/input0 [ 10.943437] smsc95xx v1.0.5 [ 10.961575] Mass Storage Function, version: 2009/09/11 [ 10.961580] LUN: removable file: (no medium) [ 10.968076] using random self ethernet address [ 10.974133] using random host ethernet address [ 11.001089] rndis0: HOST MAC 32:d3:66:c4:cf:3c [ 11.001314] rndis0: MAC 32:d3:66:c4:cf:3d [ 11.005558] usb0: HOST MAC 32:d3:66:c4:cf:3e [ 11.005724] usb0: MAC 32:d3:66:c4:cf:3f [ 11.005752] tegra-xudc-new 3550000.xudc: ep 0 (type: 0, dir: out) enabled [ 11.014866] l4tbr0: port 1(rndis0) entered blocking state [ 11.014870] l4tbr0: port 1(rndis0) entered disabled state [ 11.015015] device rndis0 entered promiscuous mode [ 11.020810] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 11.025709] l4tbr0: port 2(usb0) entered blocking state [ 11.025714] l4tbr0: port 2(usb0) entered disabled state [ 11.026254] device usb0 entered promiscuous mode [ 11.038894] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 11.075698] CPU1: shutdown [ 11.079287] psci: CPU1 killed (polled 0 ms) [ 11.082617] smsc95xx 1-2.4:1.0 eth1: register 'smsc95xx' at usb-3530000.xhci-2.4, smsc95xx USB 2.0 Ethernet, f2:27:e3:7f:c2:52 [ 11.091240] usbcore: registered new interface driver smsc95xx [ 11.132535] CPU2: shutdown [ 11.136212] psci: CPU2 killed (polled 0 ms) [ 11.521901] zram: Added device: zram0 [ 11.522919] zram: Added device: zram1 [ 11.531495] zram: Added device: zram2 [ 11.535819] zram: Added device: zram3 [ 11.571393] zram0: detected capacity change from 0 to 1030135808 [ 11.658115] Adding 1005988k swap on /dev/zram0. Priority:5 extents:1 across:1005988k SS [ 11.664057] zram1: detected capacity change from 0 to 1030135808 [ 11.678823] Adding 1005988k swap on /dev/zram1. Priority:5 extents:1 across:1005988k SS [ 11.695204] zram2: detected capacity change from 0 to 1030135808 [ 11.726452] Adding 1005988k swap on /dev/zram2. Priority:5 extents:1 across:1005988k SS [ 11.758675] zram3: detected capacity change from 0 to 1030135808 [ 11.788148] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 11.810095] Adding 1005988k swap on /dev/zram3. Priority:5 extents:1 across:1005988k SS [ 11.880473] gpio tegra-gpio wake18 for gpio=101(M:5) [ 11.882981] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 11.894875] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 11.895002] Dongle Host Driver, version 1.201.82 (r) Compiled from [ 11.895013] wl_android_wifi_on in [ 11.895018] wifi_platform_set_power = 1 [ 12.254280] sdhci-tegra 3440000.sdhci: Tuning done, restoring the best tap value : 60 [ 12.254856] F1 signature read @0x18000000=0x17214354 [ 12.259382] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x1 pkg:0x2 [ 12.260111] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000 [ 12.376518] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded. [ 12.441136] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us) [ 12.441381] gpio tegra-gpio-aon wake69 for gpio=59(FF:3) [ 12.441441] gpio tegra-gpio-aon wake69 for gpio=59(FF:3) [ 12.441443] Enabling wake69 [ 12.443959] wifi_platform_get_mac_addr [ 12.445674] Firmware up: op_mode=0x0005, MAC=48:b0:2d:48:5a:25 [ 12.450161] clm path from default:/lib/firmware/brcm/bcmdhd.clm_blob [ 12.450194] Skipping the clm download. len:0 memblk: (null) [ 12.453110] dhd_preinit_ioctls pspretend_threshold for HostAPD failed -23 [ 12.460252] Firmware version = wl0: Jul 21 2020 16:35:45 version 7.35.349.94 (r726700 CY) FWID 01-aa356e32 [ 12.462713] dhd_interworking_enable: failed to set WNM info, ret=-23 [ 12.541785] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 12.603798] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 12.671957] CFGP2P-ERROR) wl_cfgp2p_add_p2p_disc_if : [ 12.671960] P2P interface registered [ 12.682359] WLC_E_IF: NO_IF set, event Ignored [ 12.696238] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 12.797017] Bridge firewalling registered [ 12.871440] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 13.015841] tegra-usb-cd usb_cd: notification status (0x1, 0xa) [ 13.015846] tegra-usb-cd usb_cd: connected to non-standard charger [ 13.324712] Netfilter messages via NETLINK v0.30. [ 13.333229] ctnetlink v0.93: registering with nfnetlink. [ 13.578041] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 13.711570] tegradc 15210000.nvdisplay: unblank [ 14.713859] fuse init (API version 7.26) [ 16.570442] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 16.570451] Bluetooth: BNEP socket layer initialized [ 17.692551] tegradc 15210000.nvdisplay: unblank [ 35.928137] spmic-ldo0: disabling [ 35.928444] spmic-ldo1: disabling [ 35.928649] en-vdd-sd: disabling [ 35.928661] vdd-usb0-5v: disabling [ 35.928671] vdd-usb1-5v: disabling [ 35.928681] vdd-3v3: disabling [ 35.928691] en-vdd-vcm-2v8: disabling [ 35.928701] vdd-sys-bl: disabling [ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.9.253 (root@ubuntu-HP-288-Pro-G6-Microtower-PC) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #167 SMP PREEMPT Thu Jun 9 15:17:25 CST 2022 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 80, [ 0.000000] OF: fdt: - 80000000 , 70000000 [ 0.000000] OF: fdt: - f0200000 , 185600000 [ 0.000000] OF: fdt: - 275e00000 , 200000 [ 0.000000] OF: fdt: - 276600000 , 200000 [ 0.000000] OF: fdt: - 277000000 , 200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fc000000 [ 0.000000] On node 0 totalpages: 2055168 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 523776 pages, LIFO batch:31 [ 0.000000] Normal zone: 24008 pages used for memmap [ 0.000000] Normal zone: 1531392 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 23 pages/cpu s57112 r8192 d28904 u94208 [ 0.000000] pcpu-alloc: s57112 r8192 d28904 u94208 alloc=23*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2022968 [ 0.000000] Kernel command line: console=ttyS0,115200 androidboot.presilicon=true firmware_class.path=/etc/firmware root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 video=tegrafb earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt rootfs.slot_suffix= usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 no_console_suspend boot.slot_suffix= boot.ratchetvalues=0.2031647.1 vpr_resize bl_prof_dataptr=0x10000@0x275840000 sdhci_tegra.en_boot_part_access=1 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 29988(91%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 7285804K/8220672K available (15102K kernel code, 2488K rwdata, 6528K rodata, 8448K init, 595K bss, 181204K reserved, 753664K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008200000 - 0xffffff80090c0000 ( 15104 KB) [ 0.000000] .rodata : 0xffffff80090c0000 - 0xffffff8009730000 ( 6592 KB) [ 0.000000] .init : 0xffffff8009730000 - 0xffffff8009f70000 ( 8448 KB) [ 0.000000] .data : 0xffffff8009f70000 - 0xffffff800a1de008 ( 2489 KB) [ 0.000000] .bss : 0xffffff800a1de008 - 0xffffff800a272d34 ( 596 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf07dc8000 ( 125 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc1f7200000 ( 8050 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.009878] Console: colour dummy device 80x25 [ 0.014539] console [tty0] enabled [ 0.018095] bootconsole [uart8250] disabled [ 0.022472] kmemleak: Kernel memory leak detector disabled [ 0.022487] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.022502] pid_max: default: 32768 minimum: 301 [ 0.022816] Security Framework initialized [ 0.022979] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.022989] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.023588] ftrace: allocating 46362 entries in 182 pages [ 0.146037] sched-energy: Sched-energy-costs installed from DT [ 0.146055] ASID allocator initialised with 65536 entries [ 0.184470] tegra-id: chipid=21817. [ 0.184484] tegra-id: opt_subrevision=1. [ 0.184506] Tegra Revision: A02p SKU: 0xdc CPU Process: 0 SoC Process: 0 [ 0.184519] DTS File Name: arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/quill/kernel-dts/tegra186-quill-p3310-1000-c03-00-base.dts [ 0.184532] DTB Build time: Jun 9 2022 15:16:29 [ 0.235100] CPU1: Booted secondary processor [4e0f0030] [ 0.266505] CPU2: Booted secondary processor [4e0f0030] [ 0.297500] CPU3: Booted secondary processor [411fd073] [ 0.329468] CPU4: Booted secondary processor [411fd073] [ 0.361460] CPU5: Booted secondary processor [411fd073] [ 0.361513] Brought up 6 CPUs [ 0.361546] SMP: Total of 6 processors activated. [ 0.361558] CPU features: detected feature: 32-bit EL0 Support [ 0.364166] CPU: All CPU(s) started at EL2 [ 0.364329] alternatives: patching kernel code [ 0.367245] devtmpfs: initialized [ 0.407096] Initilizing CustomIPI irq domain [ 0.407257] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.407282] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.415239] pinctrl core: initialized pinctrl subsystem [ 0.415487] OS set in device tree is not L4T. [ 0.415701] regulator-dummy: no parameters [ 0.415849] Initializing plugin-manager [ 0.415916] Plugin module not found [ 0.415962] Plugin-manager status disabled [ 0.417891] NET: Registered protocol family 16 [ 0.418838] pstore: using zlib compression [ 0.419093] console [pstore-1] enabled [ 0.419104] pstore: Registered ramoops as persistent store backend [ 0.419117] ramoops: attached 0x200000@0x275880000, ecc: 0/0 [ 0.445051] cpuidle: using governor menu [ 0.446565] bpmp: waiting for handshake [ 0.446581] bpmp: handshake completed [ 0.446603] bpmp: synchronizing channels [ 0.446621] bpmp: channels synchronized [ 0.446632] bpmp: mail init ok [ 0.448781] arm-smmu 12000000.iommu: probing hardware configuration... [ 0.448799] arm-smmu 12000000.iommu: SMMUv2 with: [ 0.448812] arm-smmu 12000000.iommu: stage 1 translation [ 0.448824] arm-smmu 12000000.iommu: stage 2 translation [ 0.448836] arm-smmu 12000000.iommu: nested translation [ 0.448850] arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80 [ 0.448869] arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)! [ 0.448887] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 0.448900] arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA [ 0.448912] arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA [ 0.451106] vdso: 2 pages (1 code @ ffffff80090c7000, 1 data @ ffffff8009f74000) [ 0.451136] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.453281] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.455394] Registering BPMP clocks... [ 0.455500] tegra_bpmp_clk_init: clock init ok (638 clks) [ 0.456494] Serial: AMBA PL011 UART driver [ 0.457622] tegra_powergate_init: DONE [ 0.457641] DTS File Name: arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/quill/kernel-dts/tegra186-quill-p3310-1000-c03-00-base.dts [ 0.457664] DTB Build time: Jun 9 2022 15:16:29 [ 0.459827] Tegra reboot handler registered. [ 0.461393] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.461488] tegra-pmc: get_secure_pmc_setting: done secure_pmc=0 [ 0.461512] tegra-pmc: ### PMC reset source: TEGRA_SOFTWARE_RESET [ 0.461524] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L1 [ 0.461535] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.461697] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.461722] tegra-pmc c360000.pmc: IO padctrl driver initialized [ 0.462066] iommu: Adding device 3460000.sdhci to group 0 [ 0.462762] iommu: Adding device 3400000.sdhci to group 1 [ 0.463826] iommu: Adding device 3507000.ahci-sata to group 2 [ 0.463851] arm-smmu: forcing sodev map for 3507000.ahci-sata [ 0.464306] iommu: Adding device 3160000.i2c to group 3 [ 0.464773] iommu: Adding device c240000.i2c to group 4 [ 0.465128] iommu: Adding device 3180000.i2c to group 5 [ 0.465513] iommu: Adding device 3190000.i2c to group 6 [ 0.465944] iommu: Adding device 31b0000.i2c to group 7 [ 0.466292] iommu: Adding device 31c0000.i2c to group 8 [ 0.466648] iommu: Adding device c250000.i2c to group 9 [ 0.466996] iommu: Adding device 31e0000.i2c to group 10 [ 0.468494] iommu: Adding device 3210000.spi to group 11 [ 0.468849] iommu: Adding device c260000.spi to group 12 [ 0.469202] iommu: Adding device 3240000.spi to group 13 [ 0.469952] iommu: Adding device 3100000.serial to group 14 [ 0.470308] iommu: Adding device 3110000.serial to group 15 [ 0.470654] iommu: Adding device c280000.serial to group 16 [ 0.470994] iommu: Adding device 3130000.serial to group 17 [ 0.472401] iommu: Adding device 2490000.ether_qos to group 18 [ 0.472432] arm-smmu: forcing sodev map for 2490000.ether_qos [ 0.473331] iommu: Adding device b000000.rtcpu to group 19 [ 0.475574] iommu: Adding device 13e10000.host1x to group 20 [ 0.475887] iommu: Adding device 13e10000.host1x:ctx0 to group 21 [ 0.476218] iommu: Adding device 13e10000.host1x:ctx1 to group 22 [ 0.476530] iommu: Adding device 13e10000.host1x:ctx2 to group 23 [ 0.476839] iommu: Adding device 13e10000.host1x:ctx3 to group 24 [ 0.477169] iommu: Adding device 13e10000.host1x:ctx4 to group 25 [ 0.477508] iommu: Adding device 13e10000.host1x:ctx5 to group 26 [ 0.477828] iommu: Adding device 13e10000.host1x:ctx6 to group 27 [ 0.478163] iommu: Adding device 13e10000.host1x:ctx7 to group 28 [ 0.478646] iommu: Adding device 150c0000.nvcsi to group 29 [ 0.479306] iommu: Adding device 15700000.vi to group 30 [ 0.479683] iommu: Adding device 15600000.isp to group 31 [ 0.479913] iommu: Adding device 15200000.dc_common to group 32 [ 0.480545] iommu: Adding device 15210000.nvdisplay to group 33 [ 0.480911] iommu: Adding device 15340000.vic to group 34 [ 0.481144] iommu: Adding device 154c0000.nvenc to group 35 [ 0.481372] iommu: Adding device 15480000.nvdec to group 36 [ 0.481753] iommu: Adding device 15380000.nvjpg to group 37 [ 0.481982] iommu: Adding device 15500000.tsec to group 38 [ 0.482205] iommu: Adding device 15100000.tsecb to group 39 [ 0.482915] iommu: Adding device 15810000.se to group 40 [ 0.483144] iommu: Adding device 15820000.se to group 41 [ 0.483367] iommu: Adding device 15830000.se to group 42 [ 0.483589] iommu: Adding device 15840000.se to group 43 [ 0.484479] iommu: Adding device smmu_test to group 44 [ 0.485096] mc: mapped MMIO address: 0xffffff800a5e0000 -> 0x2c10000 [ 0.485120] mc: mapped MMIO address: 0xffffff800a7b0000 -> 0x2c20000 [ 0.485139] mc: mapped MMIO address: 0xffffff800a7d0000 -> 0x2c30000 [ 0.485160] mc: mapped MMIO address: 0xffffff800b010000 -> 0x2c40000 [ 0.485179] mc: mapped MMIO address: 0xffffff800b030000 -> 0x2c50000 [ 0.485197] nv-tegra-mc 2c10000.mc: No mssnvlink node [ 0.485215] mc-err: mcerr ops are set to t18x [ 0.485376] dram-ecc: DRAM ECC disabled-MC_ECC_CONTROL:0x0000000c [ 0.486620] iommu: Adding device 3530000.xhci to group 45 [ 0.486647] arm-smmu: forcing sodev map for 3530000.xhci [ 0.487103] iommu: Adding device 3550000.xudc to group 46 [ 0.487126] arm-smmu: forcing sodev map for 3550000.xudc [ 0.487831] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_83 = 0x10a [ 0.487849] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3 [ 0.487863] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256 [ 0.488511] iommu: Adding device 17000000.gp10b to group 47 [ 0.489645] tegra-reset 5000000.clock: registered 193 resets. [ 0.491997] iommu: Adding device d000000.bpmp to group 48 [ 0.492209] bpmp: ping status is 0 [ 0.492312] bpmp d000000.bpmp: firmware tag is 91572a54614f84d0fd0c270beec2c56f [ 0.494942] bpmp d000000.bpmp: probe ok [ 0.498241] iommu: Adding device 2600000.dma to group 49 [ 0.499188] gpio gpiochip0: gpio-line-names specifies 180 line names but there are 192 lines on the chip [ 0.499716] GPIO line 461 (camera-control-output-low) hogged as output/low [ 0.499759] GPIO line 456 (camera-control-output-low) hogged as output/low [ 0.499800] GPIO line 457 (camera-control-output-low) hogged as output/low [ 0.499839] GPIO line 426 (camera-control-output-low) hogged as output/low [ 0.499882] GPIO line 424 (wifi-enable) hogged as output/high [ 0.499921] GPIO line 445 (sdmmc-wake-support-input) hogged as input [ 0.499960] GPIO line 446 (sdmmc-wake-support-output) hogged as output/low [ 0.500141] gpiochip_setup_dev: registered GPIOs 320 to 511 on device: gpiochip0 (tegra-gpio) [ 0.503935] gpio gpiochip1: gpio-line-names specifies 60 line names but there are 64 lines on the chip [ 0.504068] GPIO line 315 (wifi-wake-ap) hogged as input [ 0.504228] gpiochip_setup_dev: registered GPIOs 256 to 319 on device: gpiochip1 (tegra-gpio-aon) [ 0.505945] iommu: Adding device 10003000.pcie-controller to group 50 [ 0.505972] arm-smmu: forcing sodev map for 10003000.pcie-controller [ 0.506322] iommu: Adding device sound to group 51 [ 0.506704] iommu: Adding device 3510000.hda to group 52 [ 0.514354] iommu: Adding device c1a0000.aon to group 53 [ 0.514798] vdd-ac-bat: 5000 mV [ 0.516466] vdd-1v8-ap: 1800 mV [ 0.522518] random: fast init done [ 0.537439] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.540693] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.540904] SCSI subsystem initialized [ 0.541016] libata version 3.00 loaded. [ 0.541177] usbcore: registered new interface driver usbfs [ 0.541223] usbcore: registered new interface driver hub [ 0.541261] usbcore: registered new device driver usb [ 0.543414] tegra-i2c 3160000.i2c: no acknowledge from address 0x74 [ 0.543458] pca953x 0-0074: failed reading register [ 0.543505] pca953x: probe of 0-0074 failed with error -121 [ 0.543845] tegra-i2c 3160000.i2c: no acknowledge from address 0x77 [ 0.543885] pca953x 0-0077: failed reading register [ 0.543924] pca953x: probe of 0-0077 failed with error -121 [ 0.553200] max77620 4-003c: henry teset at max77620 [ 0.553222] henry test at max77620 611 [ 0.554194] max77620 4-003c: PMIC Version OTP:0x45 and ES:0x8 [ 0.557788] vddio-ddr: at 1125 mV [ 0.561509] avdd_dsi_csi: 1200 mV [ 0.565511] vdd-1v8: 1800 mV [ 0.569514] vdd-3v3-sys: 3300 mV [ 0.570385] spmic-ldo0: at 1800 mV [ 0.571112] spmic-ldo1: at 800 mV [ 0.573481] vddio-3v3: 3300 mV [ 0.574219] vddio-sdmmc1: 1800 <--> 3300 mV at 3300 mV [ 0.577482] vdd-rtc: at 800 mV [ 0.578117] avdd-ts-hv: 1800 <--> 3300 mV at 1800 mV [ 0.581486] spmic-ldo6: at 1500 mV [ 0.585480] vdd-pex-1v00: 1000 mV [ 0.586105] dvdd-pex: 1000 mV [ 0.588397] GPIO line 253 (spmic_gpio_input) hogged as input [ 0.588554] GPIO line 254 (spmic_gpio_input) hogged as input [ 0.588721] gpiochip_setup_dev: registered GPIOs 248 to 255 on device: gpiochip2 (max77620-gpio) [ 0.588915] max77620 4-003c: max77620 probe successful [ 0.589315] media: Linux media interface: v0.10 [ 0.589354] Linux video capture interface: v2.00 [ 0.593046] pps_core: LinuxPPS API ver. 1 registered [ 0.593062] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.593091] PTP clock support registered [ 0.593289] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.593515] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.593546] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.594755] trusty trusty: trusty version: Built: 12:20:14 Jul 26 2021 [ 0.594788] trusty trusty: selected api version: 3 (requested 3) [ 0.595578] Advanced Linux Sound Architecture Driver Initialized. [ 0.595910] Bluetooth: Core ver 2.22 [ 0.595950] NET: Registered protocol family 31 [ 0.595962] Bluetooth: HCI device and connection manager initialized [ 0.595978] Bluetooth: HCI socket layer initialized [ 0.595991] Bluetooth: L2CAP socket layer initialized [ 0.596014] Bluetooth: SCO socket layer initialized [ 0.596521] en-vdd-sd: 3300 mV [ 0.596923] vdd-usb0-5v: 5000 mV [ 0.597212] vdd-usb1-5v: 5000 mV [ 0.597712] vdd-3v3: 3300 mV [ 0.597974] en-vdd-vcm-2v8: 2800 mV [ 0.598219] vdd-sys-bl: 3300 mV [ 0.600381] camchar: rtcpu character device driver loaded [ 0.601011] gpio tegra-gpio wake53 for gpio=159(X:7) [ 0.602699] extcon-gpio-states external-connection:extcon@1: Cable state:1, cable id:1 [ 0.603504] clocksource: Switched to clocksource arch_sys_counter [ 0.625678] VFS: Disk quotas dquot_6.6.0 [ 0.625771] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.626029] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.626564] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000c6000000, size=0x2a000000 [ 0.626692] cma: enabled page replacement for spfn=c6000, epfn=f0000 [ 0.626707] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 0.626725] nvmap: nvmap_select_cache_ops() nvmap cache ops set to roc [ 0.626759] nvmap_page_pool_init: Total RAM pages: 2009867 [ 0.626771] nvmap_page_pool_init: nvmap page pool size: 251233 pages (981 MB) [ 0.626826] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.627305] misc nvmap: created heap vpr base 0x00000000c6000000 size (688128KiB) [ 0.629304] tegra-gpcdma 2600000.dma: GPC DMA driver register 32 channels [ 0.635561] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type BCPU-therm [ 0.635815] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type MCPU-therm [ 0.636269] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.636359] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.636477] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type Tboard_tegra [ 0.636594] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type Tdiode_tegra [ 0.636765] thermal thermal_zone6: Registering thermal zone thermal_zone6 for type PMIC-Die [ 0.636978] la/ptsa driver initialized. [ 0.636995] pre_t19x_iso_plat_init(): iso emc max clk=1866000KHz [ 0.637007] pre_t19x_iso_plat_init(): max_iso_bw=26870400KB [ 0.637306] NET: Registered protocol family 2 [ 0.637931] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.638254] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.638857] TCP: Hash tables configured (established 65536 bind 65536) [ 0.638917] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.639044] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.639381] NET: Registered protocol family 1 [ 0.639766] RPC: Registered named UNIX socket transport module. [ 0.639781] RPC: Registered udp transport module. [ 0.639792] RPC: Registered tcp transport module. [ 0.639803] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.639817] PCI: CLS 0 bytes, default 64 [ 0.639929] Trying to unpack rootfs image as initramfs... [ 0.655733] host1x 13e10000.host1x: initialized [ 0.656949] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.658960] audit: initializing netlink subsys (disabled) [ 0.659005] audit: type=2000 audit(0.536:1): initialized [ 0.659392] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.665861] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.666821] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.667344] 9p: Installing v9fs 9p2000 file system support [ 0.669436] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.669508] io scheduler noop registered [ 0.669720] io scheduler cfq registered (default) [ 0.673047] gic 2a41000.agic-controller: GIC IRQ controller registered [ 0.780128] iommu: Adding device aconnect@2a41000:adsp_audio to group 54 [ 0.814915] iommu: Adding device 2993000.adsp to group 55 [ 0.815996] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 0.818548] tegra-xusb-padctl 3520000.xusb_padctl: VBUS over-current detection enabled [ 0.821853] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.823071] tegra-pwm 3290000.pwm: PWM clk can sleep in ops [ 0.824185] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 0.825285] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.827810] tegra-pcie 10003000.pcie-controller: 4x1, 1x1 configuration [ 0.828779] tegra-pcie 10003000.pcie-controller: PCIE: Enable power rails [ 0.829133] tegra-pcie 10003000.pcie-controller: probing port 0, using 4 lanes [ 0.829238] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 0.829355] misc tegra_camera_ctrl: tegra_camera_isomgr_register tpg_max_iso = 3916800KBs [ 0.829376] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1000000, vi_iso_bw=750000, max_bw=3916800 [ 0.831388] tegra-pcie 10003000.pcie-controller: probing port 2, using 1 lanes [ 0.832673] tsec 15500000.tsec: initialized [ 0.833770] tsec 15100000.tsecb: initialized [ 0.836993] nvdec 15480000.nvdec: initialized [ 0.842750] falcon 15340000.vic: initialized [ 0.844125] falcon 154c0000.nvenc: initialized [ 0.845363] falcon 15380000.nvjpg: initialized [ 0.847237] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56) [ 0.848697] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57) [ 0.850127] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58) [ 0.851586] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59) [ 0.853033] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60) [ 0.854459] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61) [ 0.855886] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62) [ 0.857360] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63) [ 0.860499] tegradccommon 15200000.dc_common: host1x channel mapped [ 0.860520] tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated [ 0.860557] tegradccommon 15200000.dc_common: dma mapping done [ 0.860695] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=391 [ 0.861225] tegradc 15210000.nvdisplay: disp0 connected to head1->/host1x/sor1 [ 0.861283] generic_infoframe_type: 0x87 [ 0.861370] tegra_cec 3960000.tegra_cec: Unpowergate DISP: 0. [ 0.861374] tegradc 15210000.nvdisplay: DT parsed successfully [ 0.861391] tegradc 15210000.nvdisplay: Display dc.ffffff800b3a0000 registered with id=0 [ 0.861621] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 0.861645] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 0.861808] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 0.861822] tegra_cec 3960000.tegra_cec: probed [ 0.869382] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 16727000 KB/s [ 0.869404] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 665600000 Hz [ 0.869425] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 357620000 Hz [ 0.869633] tegradc 15210000.nvdisplay: vblank syncpt # 8 for dc 1 [ 0.869652] tegradc 15210000.nvdisplay: vpulse3 syncpt # 9 for dc 1 [ 0.870489] tegradc 15210000.nvdisplay: dc_hdmi_hotplug_init: couldn't get regulator vdd_hdmi_5v0, -517 [ 0.873385] tegradc 15210000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board [ 0.873406] tegradc 15210000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 0.876004] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 32 channels [ 0.876888] tegra-fuse-burn 3820000.efuse:efuse-burn: shutdown limit check disabled [ 0.876937] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized [ 0.877415] kfuse 3830000.kfuse: initialized [ 0.877553] tegra-i2c 3190000.i2c: arb lost in communicate to add 0x50 [ 0.877695] tegra-i2c 3190000.i2c: Un-recovered Arb lost [ 0.879205] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 0.880872] tegradc 15210000.nvdisplay: probed [ 0.881236] Console: switching to colour frame buffer device 80x30 [ 0.881266] tegradc 15210000.nvdisplay: fb registered [ 0.881473] gpio tegra-gpio wake21 for gpio=121(P:1) [ 0.882282] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 0.882376] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 0.882468] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 0.882883] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.890808] Parent Clock set for DC plld2 [ 0.891035] console [ttyS0] disabled [ 0.891068] 3100000.serial: ttyS0 at MMIO 0x3100000 (irq = 36, base_baud = 25500000) is a Tegra [ 0.893912] edid invalid [ 0.894642] tegradc 15210000.nvdisplay: hdmi: tmds rate:25200K prod-setting:prod_c_hdmi_0m_54m [ 0.895914] tegradc 15210000.nvdisplay: hdmi: get YCC quant from EDID. [ 0.899364] tegra-i2c 3190000.i2c: arb lost in communicate to add 0x50 [ 0.899503] tegra-i2c 3190000.i2c: Un-recovered Arb lost [ 0.903108] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 0.903110] Extcon AUX1(HDMI) enable [ 1.006876] tegra-i2c 3190000.i2c: arb lost in communicate to add 0x50 [ 1.007006] tegra-i2c 3190000.i2c: Un-recovered Arb lost [ 1.010820] tegra-i2c 3190000.i2c: arb lost in communicate to add 0x50 [ 1.010948] tegra-i2c 3190000.i2c: Un-recovered Arb lost [ 1.014773] tegra-i2c 3190000.i2c: arb lost in communicate to add 0x50 [ 1.014901] tegra-i2c 3190000.i2c: Un-recovered Arb lost [ 1.018715] tegra-i2c 3190000.i2c: arb lost in communicate to add 0x50 [ 1.018843] tegra-i2c 3190000.i2c: Un-recovered Arb lost [ 1.022657] tegra-i2c 3190000.i2c: arb lost in communicate to add 0x50 [ 1.022784] tegra-i2c 3190000.i2c: Un-recovered Arb lost [ 1.026597] tegra-i2c 3190000.i2c: arb lost in communicate to add 0x50 [ 1.026725] tegra-i2c 3190000.i2c: Un-recovered Arb lost [ 1.030539] tegra-i2c 3190000.i2c: arb lost in communicate to add 0x50 [ 1.030666] tegra-i2c 3190000.i2c: Un-recovered Arb lost [ 1.034479] tegra-i2c 3190000.i2c: arb lost in communicate to add 0x50 [ 1.034607] tegra-i2c 3190000.i2c: Un-recovered Arb lost [ 1.038421] tegra-i2c 3190000.i2c: arb lost in communicate to add 0x50 [ 1.038549] tegra-i2c 3190000.i2c: Un-recovered Arb lost [ 1.042364] tegra-i2c 3190000.i2c: arb lost in communicate to add 0x50 [ 1.042492] tegra-i2c 3190000.i2c: Un-recovered Arb lost [ 1.042981] tegradc 15210000.nvdisplay: hdmi: edid read failed [ 1.043025] tegradc 15210000.nvdisplay: hdmi: using fallback edid [ 1.257048] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 1.661140] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 1.884196] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 1.950459] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 1.950462] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 2.065238] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 2.067253] tegra-pcie 10003000.pcie-controller: link 0 down, ignoring [ 2.469341] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 2.873440] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 3.277531] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 3.279548] tegra-pcie 10003000.pcie-controller: link 2 down, ignoring [ 3.477779] console [ttyS0] enabled [ 3.477785] tegradc 15210000.nvdisplay: blank - powerdown [ 3.479303] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 37, base_baud = 0) is a TEGRA_UART [ 3.480248] c280000.serial: ttyTHS2 at MMIO 0xc280000 (irq = 38, base_baud = 0) is a TEGRA_UART [ 3.480420] serial-tegra 3130000.serial: RX in PIO mode [ 3.481195] 3130000.serial: ttyTHS3 at MMIO 0x3130000 (irq = 39, base_baud = 0) is a TEGRA_UART [ 3.482196] [drm] Initialized [ 3.483864] tegra-pcie 10003000.pcie-controller: PCIE: no end points detected [ 3.484117] tegra-pcie 10003000.pcie-controller: PCIE: Disable power rails [ 3.492549] brd: module loaded [ 3.495860] loop: module loaded [ 3.495905] tegra_profiler: version: 1.145, samples/io: 49/28 [ 3.495986] tegra_profiler: auth: init [ 3.496346] nct1008_nct72 7-004c: starting parse dt [ 3.496444] nct1008_nct72 7-004c: !!!Found deprecated property!!! [ 3.496449] nct1008_nct72 7-004c: success parsing dt [ 3.496550] nct1008_nct72 7-004c: success in enabling tmp451 VDD rail [ 3.496909] THERMAL EST: found 3 subdevs [ 3.496913] THERMAL EST num_resources: 0 [ 3.496916] [THERMAL EST subdev 0] [ 3.496919] [THERMAL EST subdev 1] [ 3.496922] [THERMAL EST subdev 2] [ 3.497177] thermal thermal_zone7: Registering thermal zone thermal_zone7 for type thermal-fan-est [ 3.497179] THERMAL EST: thz register success. [ 3.497263] THERMAL EST: end of probe, return err: 0 [ 3.497961] sd: No Scsi addr parsed to reserve index [ 3.497982] hisi_sas: driver version v1.6 [ 3.501504] tegra-ahci 3507000.ahci-sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode [ 3.501510] tegra-ahci 3507000.ahci-sata: flags: 64bit ncq sntf pm led pmp pio slum part deso sadm apst [ 3.502220] scsi host0: tegra_ahci [ 3.502580] scsi host1: tegra_ahci [ 3.502714] ata1: SATA max UDMA/133 mmio [mem 0x03507000-0x03508fff] port 0x100 irq 24 [ 3.502716] ata2: DUMMY [ 3.507992] libphy: Fixed MDIO Bus: probed [ 3.508547] tun: Universal TUN/TAP device driver, 1.6 [ 3.508548] tun: (C) 1999-2004 Max Krasnyansky [ 3.509186] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 3.509188] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 3.509222] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 3.509224] igb: Copyright (c) 2007-2014 Intel Corporation. [ 3.509253] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 3.509254] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 3.509290] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k [ 3.509292] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 3.512750] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 3.512752] Extcon AUX1(HDMI) disable [ 3.515620] eqos 2490000.ether_qos: can't get pllrefe_vcoout clk (-2) [ 3.518204] eqos 2490000.ether_qos: failed to read eqos_auto_cal_config_0_reg [ 3.518695] eqos 2490000.ether_qos: Setting local MAC: 48 b0 2d 48 5a 27 [ 3.518726] Using phyrst_lpmode = 0 from DT [ 3.518802] libphy: dwc_phy: probed [ 3.519091] bcm54xx_low_power_mode(): put phy in iddq-lp mode [ 3.521092] PPP generic driver version 2.4.2 [ 3.521210] PPP BSD Compression module registered [ 3.521212] PPP Deflate Compression module registered [ 3.521227] PPP MPPE Compression module registered [ 3.521230] NET: Registered protocol family 24 [ 3.521270] usbcore: registered new interface driver r8152 [ 3.521303] usbcore: registered new interface driver asix [ 3.521333] usbcore: registered new interface driver ax88179_178a [ 3.521359] usbcore: registered new interface driver cdc_ether [ 3.521384] usbcore: registered new interface driver net1080 [ 3.521410] usbcore: registered new interface driver cdc_subset [ 3.521438] usbcore: registered new interface driver zaurus [ 3.521474] usbcore: registered new interface driver cdc_ncm [ 3.521581] VFIO - User Level meta-driver version: 0.3 [ 3.522409] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.522420] ehci-pci: EHCI PCI platform driver [ 3.522451] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.522456] ohci-pci: OHCI PCI platform driver [ 3.522486] ohci-platform: OHCI generic platform driver [ 3.527615] tegra-xusb 3530000.xhci: USB2 port 0 has OTG_CAP [ 3.529411] tegra-xusb 3530000.xhci: extcon 0: ffffffc1eb6f0400 id [ 3.529478] tegra-xusb 3530000.xhci: Direct firmware load for tegra18x_xusb_firmware failed with error -2 [ 3.529481] tegra-xusb 3530000.xhci: Falling back to user helper [ 3.529954] usbcore: registered new interface driver uas [ 3.529989] usbcore: registered new interface driver usb-storage [ 3.530052] usbcore: registered new interface driver usbserial [ 3.531657] nct1008_nct72 7-004c: LOC shutdown limit 107 [ 3.532033] nct1008_nct72 7-004c: EXT shutdown limit 107 [ 3.534449] tegra-xudc-new 3550000.xudc: device count: 1 [ 3.535828] tegra-xudc-new 3550000.xudc: vbus state: 1 [ 3.541637] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 3.542160] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 3.547073] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 3.568573] nct1008_nct72 7-004c: initial LOC temp: 37000 [ 3.569064] nct1008_nct72 7-004c: initial EXT temp: 39250 [ 3.569936] nct1008_nct72 7-004c: hi_b:-11, lo_b:0 [ 3.572284] gpio tegra-gpio-aon wake35 for gpio=16(V:0) [ 3.573684] nct1008_nct72 7-004c: nct1008_probe: initialized [ 3.979714] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.980573] ata1.00: ATA-10: FORESEE 64GB SSD, V4.6, max UDMA/133 [ 3.980589] ata1.00: 125045424 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 3.981090] ata1.00: configured for UDMA/133 [ 3.995096] scsi 0:0:0:0: Direct-Access ATA FORESEE 64GB SSD V4.6 PQ: 0 ANSI: 5 [ 4.043498] sd 0:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB) [ 4.045210] sd 0:0:0:0: [sda] Write Protect is off [ 4.045224] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.045416] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.051013] sda: sda1 < sda5 > [ 4.054864] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.071634] tegra-xusb-padctl 3520000.xusb_padctl: tegra186_xusb_padctl_utmi_pad_dcd: DCD timeout 418 ms [ 4.121001] tegra-usb-cd usb_cd: notification status (0x0, 0x1) [ 4.121016] tegra-usb-cd usb_cd: connected to SDP [ 4.121154] tegra-xudc-new 3550000.xudc: device mode on: 0 [ 4.122357] tegra-xudc-new 3550000.xudc: active: 0 => 1 [ 4.128619] mousedev: PS/2 mouse device common for all mice [ 4.129365] usbcore: registered new interface driver xpad [ 4.274806] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 4.284030] Wake73 for irq=42 [ 4.286132] rtc rtc1: alarm rtc device [ 4.286218] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ 4.286384] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 4.288325] i2c /dev entries driver [ 4.296337] ov9281 2-0060: probing v4l2 sensor. [ 4.296346] ov9281 2-0060: henry hello test debug tttttttt test2022. [ 4.296358] henry debug line1156 [ 4.296728] henry debug line1171 [ 4.296732] henry debug line1176 [ 4.298194] henry debug line1156 [ 4.298216] henry debug line1232 [ 4.300697] tegradc 15210000.nvdisplay: unblank [ 4.305982] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 4.306662] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 4.307203] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 4.308803] henry debug line1228 [ 4.308832] ov9281 2-0060: henry test on camera common init line999. [ 4.309191] extract_pixel_format: henry debug formatyuv_grey8 [ 4.309328] henry debug line1234 [ 4.309343] henry debug line1238 [ 4.309349] ov9281 2-0060: ov9281_ctrls_init++ [ 4.309589] henry debug line1243 [ 4.309594] henry debug new line1248 [ 4.311419] tegra-i2c 3180000.i2c: no acknowledge from address 0x60 [ 4.311603] ov9281 2-0060: Failed to read chip ID [ 4.311607] henry debug line1123 [ 4.311635] ov9281 2-0060: ov9281_power_off: power off [ 4.311822] tegra-i2c 3180000.i2c: no acknowledge from address 0x60 [ 4.312321] regmap_util_write_table_8:regmap_util_write_table:-121 [ 4.312321] ov9281: probe of 2-0060 failed with error -121 [ 4.315282] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 4.320644] Parent Clock set for DC plld2 [ 4.323904] parse_throttle_dt_data: Num cap clks = 4 [ 4.323907] parse_throttle_dt_data: clk=mcpu type=1 [ 4.323909] parse_throttle_dt_data: clk=bcpu type=2 [ 4.323915] parse_throttle_dt_data: clk=gpu type=4 [ 4.323917] parse_throttle_dt_data: clk=emc type=3 [ 4.324920] tegra_throttle_probe: probe successful. #cdevs=4 [ 4.325113] tegradc 15210000.nvdisplay: hdmi: tmds rate:74250K prod-setting:prod_c_hdmi_54m_111m [ 4.325574] FAN: coudln't get the regulator [ 4.326081] tegra-oc-event d280000.soctherm-oc-event: OC driver initialized [ 4.326456] tegradc 15210000.nvdisplay: hdmi: get YCC quant from EDID. [ 4.327187] device-mapper: uevent: version 1.0.3 [ 4.327566] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 4.327820] CPU EMC frequency mapping table: from device tree [ 4.329954] tegra-i2c 3190000.i2c: arb lost in communicate to add 0x50 [ 4.330079] tegra-i2c 3190000.i2c: Un-recovered Arb lost [ 4.332033] cpufreq: platform driver Initialization: pass [ 4.332504] cpuidle: Initializing cpuidle driver init for Denver cluster [ 4.332620] cpuidle: Initializing cpuidle driver init for A57 cluster [ 4.333369] sdhci: Secure Digital Host Controller Interface driver [ 4.333369] sdhci: Copyright(c) Pierre Ossman [ 4.333370] sdhci-pltfm: SDHCI platform and OF driver helper [ 4.334550] sdhci-tegra 3460000.sdhci: Client registration for eMC Successful [ 4.335705] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 4.335706] Extcon AUX1(HDMI) enable [ 4.336593] CMDQ: cmdq_platfm_init successful [ 4.337615] CQE: CMD_TIMING bit set for R1B DCMD [ 4.340098] sdhci-tegra 3440000.sdhci: Client registration for eMC Successful [ 4.343247] tegradc 15210000.nvdisplay: sync windows ret = 249 [ 4.345736] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 4.345787] sdhci-tegra 3400000.sdhci: Got WP GPIO [ 4.347450] sdhci-tegra 3400000.sdhci: Client registration for eMC Successful [ 4.349157] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 258 [ 4.353566] tegra-se-nvhost 15810000.se: initialized [ 4.354663] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 4.355239] tegra-se-nvhost 15820000.se: initialized [ 4.356200] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 4.356754] tegra-se-nvhost 15830000.se: initialized [ 4.357519] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 4.358055] tegra-se-nvhost 15840000.se: initialized [ 4.358924] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 4.359740] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.363583] hidraw: raw HID events driver (C) Jiri Kosina [ 4.364472] usbcore: registered new interface driver usbhid [ 4.364473] usbhid: USB HID core driver [ 4.379506] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit with 64 bit addr [ 4.391498] mmc1: SDHCI controller on 3440000.sdhci [3440000.sdhci] using ADMA 64-bit with 64 bit addr [ 4.396752] gpio tegra-gpio wake71 for gpio=125(P:5) [ 4.396799] mmc2: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit with 64 bit addr [ 4.473576] tegra186-cam-rtcpu b000000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 4.528945] mmc0: mmc_decode_ext_csd: CMDQ supported: depth: 31, cmdq_support: 1 [ 4.703508] tegra-ivc ivc-b000000.rtcpu: region 0: iova=0xbfef0000-0xbfefdb7f size=56192 [ 4.703787] tegra-ivc ivc-b000000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.703949] tegra-ivc ivc-b000000.rtcpu:i2c@480: i2c: ver=0 grp=1 RX[8x128]=0x1900-0x1d80 TX[8x128]=0x1d80-0x2200 [ 4.704147] tegra-ivc ivc-b000000.rtcpu:vinotify@12c0: vinotify: ver=0 grp=1 RX[64x128]=0x2200-0x4280 TX[64x128]=0x4280-0x6300 [ 4.704958] tegra-ivc ivc-b000000.rtcpu:mods@32c0: mods: ver=0 grp=1 RX[1x64]=0x6300-0x63c0 TX[1x64]=0x63c0-0x6480 [ 4.705027] tegra-ivc ivc-b000000.rtcpu:ivccontrol@52c0: ivccontrol: ver=0 grp=1 RX[16x320]=0x6480-0x7900 TX[16x320]=0x7900-0x8d80 [ 4.705075] tegra-ivc ivc-b000000.rtcpu:ivccapture@72c0: ivccapture: ver=0 grp=1 RX[16x64]=0x8d80-0x9200 TX[16x64]=0x9200-0x9680 [ 4.705120] tegra-ivc ivc-b000000.rtcpu:dbg@7c00: dbg: ver=0 grp=1 RX[1x384]=0x9680-0x9880 TX[1x384]=0x9880-0x9a80 [ 4.705257] tegra-ivc ivc-b000000.rtcpu:dbg@7e00: dbg: ver=0 grp=1 RX[1x8192]=0x9a80-0xbb00 TX[1x8192]=0xbb00-0xdb80 [ 4.705580] tegra186-cam-rtcpu b000000.rtcpu: using cam RTCPU IRQ (52) [ 4.705582] tegra186-cam-rtcpu b000000.rtcpu: tegra_camrtc_mon_create is successful [ 4.715274] mmc0: periodic cache flush enabled [ 4.715281] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 4.715554] mmcblk0: mmc0:0001 DG4032 29.1 GiB [ 4.715647] mmcblk0boot0: mmc0:0001 DG4032 partition 1 4.00 MiB [ 4.715739] mmcblk0boot1: mmc0:0001 DG4032 partition 2 4.00 MiB [ 4.719840] mmcblk0rpmb: mmc0:0001 DG4032 partition 3 4.00 MiB [ 4.780254] tegra186-cam-rtcpu b000000.rtcpu: firmware version cpu=sce cmd=5 sha1=c73bbe92930645be44530c166eb578bfbb9499c3 [ 4.781986] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.782418] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.782793] register_ari_mca_banks: Registered MCA ROC:IOB [ 4.783077] register_ari_mca_banks: Registered MCA ROC:CCE [ 4.783779] tegra18-bridge 2390000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.783781] tegra18-bridge 2390000.axi2apb: enabled timeout = 11155000 [ 4.783783] tegra18-bridge 2390000.axi2apb: bridge probed OK [ 4.783842] tegra18-bridge 23a0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.783844] tegra18-bridge 23a0000.axi2apb: enabled timeout = 11155000 [ 4.783846] tegra18-bridge 23a0000.axi2apb: bridge probed OK [ 4.783892] tegra18-bridge 23b0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.783894] tegra18-bridge 23b0000.axi2apb: enabled timeout = 11155000 [ 4.783896] tegra18-bridge 23b0000.axi2apb: bridge probed OK [ 4.783944] tegra18-bridge 23c0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.783946] tegra18-bridge 23c0000.axi2apb: enabled timeout = 11155000 [ 4.783948] tegra18-bridge 23c0000.axi2apb: bridge probed OK [ 4.783994] tegra18-bridge 23d0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.783996] tegra18-bridge 23d0000.axi2apb: enabled timeout = 11155000 [ 4.783997] tegra18-bridge 23d0000.axi2apb: bridge probed OK [ 4.784046] tegra18-bridge 2100000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.784050] tegra18-bridge 2100000.axip2p: enabled timeout = 11155000 [ 4.784051] tegra18-bridge 2100000.axip2p: bridge probed OK [ 4.784098] tegra18-bridge 2110000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.784102] tegra18-bridge 2110000.axip2p: enabled timeout = 11155000 [ 4.784103] tegra18-bridge 2110000.axip2p: bridge probed OK [ 4.784151] tegra18-bridge 2120000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.784154] tegra18-bridge 2120000.axip2p: enabled timeout = 11155000 [ 4.784156] tegra18-bridge 2120000.axip2p: bridge probed OK [ 4.784200] tegra18-bridge 2130000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.784204] tegra18-bridge 2130000.axip2p: enabled timeout = 11155000 [ 4.784206] tegra18-bridge 2130000.axip2p: bridge probed OK [ 4.784251] tegra18-bridge 2140000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.784254] tegra18-bridge 2140000.axip2p: enabled timeout = 11155000 [ 4.784255] tegra18-bridge 2140000.axip2p: bridge probed OK [ 4.784300] tegra18-bridge 2150000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.784305] tegra18-bridge 2150000.axip2p: enabled timeout = 11155000 [ 4.784307] tegra18-bridge 2150000.axip2p: bridge probed OK [ 4.784355] tegra18-bridge 2160000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.784360] tegra18-bridge 2160000.axip2p: enabled timeout = 11155000 [ 4.784361] tegra18-bridge 2160000.axip2p: bridge probed OK [ 4.784405] tegra18-bridge 2170000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.784410] tegra18-bridge 2170000.axip2p: enabled timeout = 11155000 [ 4.784412] tegra18-bridge 2170000.axip2p: bridge probed OK [ 4.784458] tegra18-bridge 2180000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.784463] tegra18-bridge 2180000.axip2p: enabled timeout = 11155000 [ 4.784464] tegra18-bridge 2180000.axip2p: bridge probed OK [ 4.784512] tegra18-bridge 2190000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.784516] tegra18-bridge 2190000.axip2p: enabled timeout = 11155000 [ 4.784517] tegra18-bridge 2190000.axip2p: bridge probed OK [ 4.784574] **** A57 ECC: Enabled [ 4.784575] tegra18_a57_serr_init: on CPU 3 a A57 Core [ 4.784640] tegra18x_actmon d230000.actmon: in actmon_register()... [ 4.800346] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 [ 4.805776] tegra18x_actmon d230000.actmon: initialization Completed for the device mc_all [ 4.806435] hw perfevents: enabled with denver15_uncore_pmu PMU driver, 3 counters available [ 4.806572] denver_knobs_init:MTS_VERSION:53679346 [ 4.808397] nvpmodel: initialized successfully [ 4.812355] trusty-virtio trusty:virtio: initializing [ 4.812457] trusty_ipc virtio0: vring0: va(pa) ffffffc1e61aa000(0) qsz 32 notifyid 1 [ 4.812462] trusty_ipc virtio0: vring1: va(pa) ffffffc1e6188000(0) qsz 32 notifyid 2 [ 4.812522] trusty-virtio trusty:virtio: initializing done [ 4.812616] trusty_ipc virtio0: is online [ 4.813795] usbcore: registered new interface driver snd-usb-audio [ 4.814658] tlv320aic32x4 1-0018: henry debug aic3204 enter [ 4.814661] tlv320aic32x4 1-0018: henry debug aic3204 line972 [ 4.814666] tlv320aic32x4 1-0018: henry debug aic3204 leave [ 5.878778] input: tegra-hda HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input0 [ 5.878903] input: tegra-hda HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input1 [ 6.296435] extcon-disp-state external-connection:disp-state: cable 51 state 1 [ 6.304642] Extcon HDMI: HPD enabled [ 6.309193] tegradc 15210000.nvdisplay: hdmi: plugged [ 6.322978] OPE platform probe [ 6.327112] OPE platform probe successful [ 6.381071] henry debug aic3204 codec probe enter!!!!!!!!!!!!! [ 6.391208] henry debug aic3204 codec probe leave!!!!!!!!!!!!! [ 6.415899] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 6.419048] mmc1: hw tuning done ... [ 6.422804] mmc1: new ultra high speed SDR104 SDIO card at address 0001 [ 6.434801] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 6.441567] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 6.448354] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 6.455105] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 6.461871] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 6.468571] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 6.475268] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 6.481993] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 6.488659] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 6.495543] tegra-asoc: sound: ADMAIF11 <-> ADMAIF11 mapping ok [ 6.502370] tegra-asoc: sound: ADMAIF12 <-> ADMAIF12 mapping ok [ 6.509178] tegra-asoc: sound: ADMAIF13 <-> ADMAIF13 mapping ok [ 6.516021] tegra-asoc: sound: ADMAIF14 <-> ADMAIF14 mapping ok [ 6.522804] tegra-asoc: sound: ADMAIF15 <-> ADMAIF15 mapping ok [ 6.529605] tegra-asoc: sound: ADMAIF16 <-> ADMAIF16 mapping ok [ 6.536367] tegra-asoc: sound: ADMAIF17 <-> ADMAIF17 mapping ok [ 6.543138] tegra-asoc: sound: ADMAIF18 <-> ADMAIF18 mapping ok [ 6.549875] tegra-asoc: sound: ADMAIF19 <-> ADMAIF19 mapping ok [ 6.556605] tegra-asoc: sound: ADMAIF20 <-> ADMAIF20 mapping ok [ 6.565726] tegra-asoc: sound: henry debug tlv320aic_init enter! [ 6.572418] tegra-asoc: sound: henry debug tlv320aic_init leave! [ 6.584824] tegra-asoc: sound: ASoC: no source widget found for x OUT [ 6.591947] tegra-asoc: sound: ASoC: Failed to add route x OUT -> direct -> x Headphone [ 6.600632] tegra-asoc: sound: ASoC: no sink widget found for x IN [ 6.607456] tegra-asoc: sound: ASoC: Failed to add route x Mic -> direct -> x IN [ 6.632937] u32 classifier [ 6.636314] Actions configured [ 6.640410] Initializing XFRM netlink socket [ 6.645851] NET: Registered protocol family 10 [ 6.651484] NET: Registered protocol family 17 [ 6.656562] NET: Registered protocol family 15 [ 6.661698] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 6.675345] Bluetooth: RFCOMM socket layer initialized [ 6.681185] Bluetooth: RFCOMM ver 1.11 [ 6.685586] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 6.692180] Bluetooth: HIDP socket layer initialized [ 6.697825] 9pnet: Installing 9P2000 support [ 6.702785] Key type dns_resolver registered [ 6.707914] Registered cp15_barrier emulation handler [ 6.713671] Registered setend emulation handler [ 6.719692] registered taskstats version 1 [ 6.727882] isp 15600000.isp: initialized [ 6.737134] nvcsi 150c0000.nvcsi: initialized [ 6.743953] tegra-vi4 15700000.vi: using default number of vi channels,15 [ 6.748142] Wake83 for irq=51 [ 6.748214] gpio tegra-gpio-aon wake29 for gpio=56(FF:0) [ 6.748290] gpio tegra-gpio-aon wake67 for gpio=57(FF:1) [ 6.748365] gpio tegra-gpio-aon wake68 for gpio=58(FF:2) [ 6.748489] input: gpio-keys as /devices/gpio-keys/input/input2 [ 6.782165] tegra-vi4 15700000.vi: initialized [ 6.787336] tegra_rtc c2a0000.rtc: setting system clock to 2000-01-02 04:18:35 UTC (946786715) [ 6.798076] mmcblk mmc0:0001: Card claimed for testing. [ 6.816813] tegra-vi4 15700000.vi: subdev 150c0000.nvcsi--1 bound [ 6.832587] bpmp: mounted debugfs mirror [ 6.838550] bwmgr: missing cdev-type property [ 6.849401] ALSA device list: [ 6.853177] #0: tegra-hda at 0x3518000 irq 384 [ 6.858617] #1: tegra-snd-t186ref-mobile-rt565x [ 6.870134] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 6.879182] VFS: Mounted root (ext4 filesystem) on device 179:1. [ 6.890641] devtmpfs: mounted [ 6.896794] Freeing unused kernel memory: 8448K [ 7.043664] systemd[1]: System time before build time, advancing clock. [ 7.080526] ip_tables: (C) 2000-2006 Netfilter Core Team [ 7.095448] cgroup: cgroup2: unknown option "nsdelegate" [ 7.112575] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 7.138601] systemd[1]: Detected architecture arm64. [ 7.165805] systemd[1]: Set hostname to . [ 7.250573] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 7.269982] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 7.400805] random: systemd: uninitialized urandom read (16 bytes read) [ 7.408756] systemd[1]: Reached target User and Group Name Lookups. [ 7.418036] random: systemd: uninitialized urandom read (16 bytes read) [ 7.427191] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 7.439225] random: systemd: uninitialized urandom read (16 bytes read) [ 7.447191] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 7.458773] systemd[1]: Created slice System Slice. [ 7.466631] systemd[1]: Listening on Journal Socket. [ 7.574954] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 7.734183] systemd-journald[2165]: Received request to flush runtime journal from PID 1 [ 7.809921] random: crng init done [ 7.814281] random: 7 urandom warning(s) missed due to ratelimiting [ 8.286139] tegra-xusb 3530000.xhci: cannot find firmware....retry after 1 second [ 8.381902] gpio tegra-gpio-aon wake30 for gpio=60(FF:4) [ 8.382839] bcpu-throttle-alert cooling device registered. [ 8.383021] mcpu-throttle-alert cooling device registered. [ 8.383208] gpu-throttle-alert cooling device registered. [ 8.687673] dhd_module_init in [ 8.687777] found wifi platform device bcmdhd_wlan [ 8.692949] wifi_platform_get_country_code_map: could not get country_code_map [ 8.692955] wifi_plat_dev_drv_probe:platform country code map is not available [ 8.692970] Power-up adapter 'DHD generic adapter' [ 8.692977] wifi_platform_set_power = 1 [ 8.899534] wifi_platform_bus_enumerate device present 1 [ 8.929651] wifi_platform_bus_enumerate device present 0 [ 8.931404] F1 signature read @0x18000000=0x17214354 [ 8.950405] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x1 pkg:0x2 [ 8.951189] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000 [ 8.951284] wifi_platform_get_mac_addr [ 8.953886] ids dhd_log_netlink_init [ 8.954337] wl_create_event_handler(): thread:wl_event_handler:fee started [ 8.955100] wl_event_handler : [ 8.955104] tsk Enter, tsk = 0xffffffc1dfa01a90 [ 8.955131] dhd_attach(): thread:dhd_watchdog_thread:ff0 started [ 8.955169] dhd_attach(): thread:dhd_dpc:ff1 started [ 8.955219] dhd_attach(): thread:dhd_rxf:ff2 started [ 8.955225] dhd_deferred_work_init: work queue initialized [ 8.961381] Dongle Host Driver, version 1.201.82 (r) Compiled from [ 8.961873] Register interface [wlan0] MAC: 48:b0:2d:48:5a:25 [ 8.961878] dhd_prot_ioctl : bus is down. we have nothing to do [ 8.962850] sdhci-tegra 3440000.sdhci: Tuning done, restoring the best tap value : 60 [ 8.963896] wifi_platform_set_power = 0 [ 9.309051] tegra-xusb 3530000.xhci: Firmware timestamp: 2020-07-06 13:39:28 UTC, Version: 55.18 release [ 9.363553] tegra-xusb 3530000.xhci: xHCI Host Controller [ 9.363570] tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 1 [ 9.364264] tegra-xusb 3530000.xhci: hcc params 0x0184fd25 hci version 0x100 quirks 0x00050810 [ 9.364291] tegra-xusb 3530000.xhci: irq 71, io mem 0x03530000 [ 9.364401] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 9.364404] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.364406] usb usb1: Product: xHCI Host Controller [ 9.364408] usb usb1: Manufacturer: Linux 4.9.253 xhci-hcd [ 9.364410] usb usb1: SerialNumber: 3530000.xhci [ 9.364736] hub 1-0:1.0: USB hub found [ 9.364785] hub 1-0:1.0: 4 ports detected [ 9.365043] tegra-xusb 3530000.xhci: xHCI Host Controller [ 9.365050] tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 2 [ 9.367107] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 9.367111] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.367113] usb usb2: Product: xHCI Host Controller [ 9.367115] usb usb2: Manufacturer: Linux 4.9.253 xhci-hcd [ 9.367117] usb usb2: SerialNumber: 3530000.xhci [ 9.367452] hub 2-0:1.0: USB hub found [ 9.367580] hub 2-0:1.0: 3 ports detected [ 9.370590] Wake76 for irq=199 [ 9.370593] Wake77 for irq=199 [ 9.370594] Wake78 for irq=199 [ 9.370596] Wake79 for irq=199 [ 9.370597] Wake80 for irq=199 [ 9.370598] Wake81 for irq=199 [ 9.370599] Wake82 for irq=199 [ 9.370627] tegra-xusb 3530000.xhci: Upgrade port 0 to USB3.0 [ 9.370631] tegra-xusb 3530000.xhci: Upgrade port 1 to USB3.0 [ 9.477001] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 9.595810] usb 2-1: new SuperSpeed USB device number 2 using tegra-xusb [ 9.615848] usb 2-1: New USB device found, idVendor=0451, idProduct=8140 [ 9.615853] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 9.617390] hub 2-1:1.0: USB hub found [ 9.617441] hub 2-1:1.0: 4 ports detected [ 9.735533] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 9.755953] usb 1-2: New USB device found, idVendor=0451, idProduct=8142 [ 9.755958] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=1 [ 9.755961] usb 1-2: SerialNumber: A20F0861A4CD [ 9.756731] hub 1-2:1.0: USB hub found [ 9.756792] hub 1-2:1.0: 4 ports detected [ 9.904020] usb 2-1.3: new SuperSpeed USB device number 3 using tegra-xusb [ 9.926491] usb 2-1.3: New USB device found, idVendor=05e3, idProduct=0612 [ 9.926497] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 9.926500] usb 2-1.3: Product: USB3.1 Hub [ 9.926502] usb 2-1.3: Manufacturer: GenesysLogic [ 9.927660] hub 2-1.3:1.0: USB hub found [ 9.927981] hub 2-1.3:1.0: 4 ports detected [ 10.043527] usb 1-2.3: new high-speed USB device number 3 using tegra-xusb [ 10.051567] usb 2-1.3: usb_suspend_both: status 0 [ 10.066321] usb 1-2.3: New USB device found, idVendor=05e3, idProduct=0610 [ 10.066327] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 10.066330] usb 1-2.3: Product: USB2.0 Hub [ 10.066333] usb 1-2.3: Manufacturer: GenesysLogic [ 10.067166] hub 1-2.3:1.0: USB hub found [ 10.067469] hub 1-2.3:1.0: 4 ports detected [ 10.069823] using random self ethernet address [ 10.076028] using random host ethernet address [ 10.099549] usb 2-1: usb_suspend_both: status 0 [ 10.099682] usb usb2: usb_suspend_both: status 0 [ 10.151546] usb 1-2.4: new high-speed USB device number 4 using tegra-xusb [ 10.171839] usb 1-2.4: New USB device found, idVendor=0424, idProduct=9e00 [ 10.171844] usb 1-2.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 10.355552] usb 1-2.3.2: new low-speed USB device number 5 using tegra-xusb [ 10.383417] usb 1-2.3.2: New USB device found, idVendor=03f0, idProduct=2f4a [ 10.383423] usb 1-2.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 10.383426] usb 1-2.3.2: Product: HP Business Slim Keyboard [ 10.383428] usb 1-2.3.2: Manufacturer: Chicony [ 10.387966] input: Chicony HP Business Slim Keyboard as /devices/3530000.xhci/usb1/1-2/1-2.3/1-2.3.2/1-2.3.2:1.0/0003:03F0:2F4A.0001/input/input3 [ 10.448089] hid-generic 0003:03F0:2F4A.0001: input,hidraw0: USB HID v1.10 Keyboard [Chicony HP Business Slim Keyboard] on usb-3530000.xhci-2.3.2/input0 [ 10.456855] input: Chicony HP Business Slim Keyboard as /devices/3530000.xhci/usb1/1-2/1-2.3/1-2.3.2/1-2.3.2:1.1/0003:03F0:2F4A.0002/input/input4 [ 10.515829] hid-generic 0003:03F0:2F4A.0002: input,hidraw1: USB HID v1.10 Device [Chicony HP Business Slim Keyboard] on usb-3530000.xhci-2.3.2/input1 [ 10.595709] usb 1-2.3.3: new low-speed USB device number 6 using tegra-xusb [ 10.619915] usb 1-2.3.3: New USB device found, idVendor=03f0, idProduct=134a [ 10.619921] usb 1-2.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 10.619924] usb 1-2.3.3: Product: HP USB Optical Mouse [ 10.619926] usb 1-2.3.3: Manufacturer: PixArt [ 10.627078] input: PixArt HP USB Optical Mouse as /devices/3530000.xhci/usb1/1-2/1-2.3/1-2.3.3/1-2.3.3:1.0/0003:03F0:134A.0003/input/input5 [ 10.627428] hid-generic 0003:03F0:134A.0003: input,hidraw2: USB HID v1.11 Mouse [PixArt HP USB Optical Mouse] on usb-3530000.xhci-2.3.3/input0 [ 10.707891] Mass Storage Function, version: 2009/09/11 [ 10.707897] LUN: removable file: (no medium) [ 10.722277] using random self ethernet address [ 10.734691] using random host ethernet address [ 10.802161] smsc95xx v1.0.5 [ 10.867545] rndis0: HOST MAC 32:d3:66:c4:cf:3c [ 10.867819] rndis0: MAC 32:d3:66:c4:cf:3d [ 10.869603] usb0: HOST MAC 32:d3:66:c4:cf:3e [ 10.869632] usb0: MAC 32:d3:66:c4:cf:3f [ 10.869663] tegra-xudc-new 3550000.xudc: ep 0 (type: 0, dir: out) enabled [ 10.885118] l4tbr0: port 1(rndis0) entered blocking state [ 10.885122] l4tbr0: port 1(rndis0) entered disabled state [ 10.885628] device rndis0 entered promiscuous mode [ 10.893466] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 10.921041] l4tbr0: port 2(usb0) entered blocking state [ 10.921045] l4tbr0: port 2(usb0) entered disabled state [ 10.925238] device usb0 entered promiscuous mode [ 10.956508] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 10.984116] smsc95xx 1-2.4:1.0 eth1: register 'smsc95xx' at usb-3530000.xhci-2.4, smsc95xx USB 2.0 Ethernet, ba:30:b4:c5:c2:80 [ 10.990006] usbcore: registered new interface driver smsc95xx [ 11.225255] CPU1: shutdown [ 11.228832] psci: CPU1 killed (polled 0 ms) [ 11.252008] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 11.270999] CPU2: shutdown [ 11.274514] psci: CPU2 killed (polled 0 ms) [ 11.348471] gpio tegra-gpio wake18 for gpio=101(M:5) [ 11.350795] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 11.362287] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 11.362402] Dongle Host Driver, version 1.201.82 (r) Compiled from [ 11.362411] wl_android_wifi_on in [ 11.362415] wifi_platform_set_power = 1 [ 11.519995] zram: Added device: zram0 [ 11.522588] zram: Added device: zram1 [ 11.522964] zram: Added device: zram2 [ 11.523883] zram: Added device: zram3 [ 11.559355] zram0: detected capacity change from 0 to 1030135808 [ 11.610410] Adding 1005988k swap on /dev/zram0. Priority:5 extents:1 across:1005988k SS [ 11.616744] zram1: detected capacity change from 0 to 1030135808 [ 11.640398] Adding 1005988k swap on /dev/zram1. Priority:5 extents:1 across:1005988k SS [ 11.658751] zram2: detected capacity change from 0 to 1030135808 [ 11.681944] Adding 1005988k swap on /dev/zram2. Priority:5 extents:1 across:1005988k SS [ 11.686979] zram3: detected capacity change from 0 to 1030135808 [ 11.701085] Adding 1005988k swap on /dev/zram3. Priority:5 extents:1 across:1005988k SS [ 11.744999] sdhci-tegra 3440000.sdhci: Tuning done, restoring the best tap value : 60 [ 11.745646] F1 signature read @0x18000000=0x17214354 [ 11.760139] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x1 pkg:0x2 [ 11.760911] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000 [ 11.992333] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded. [ 12.056944] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us) [ 12.057194] gpio tegra-gpio-aon wake69 for gpio=59(FF:3) [ 12.057255] gpio tegra-gpio-aon wake69 for gpio=59(FF:3) [ 12.057257] Enabling wake69 [ 12.059832] wifi_platform_get_mac_addr [ 12.063004] Firmware up: op_mode=0x0005, MAC=48:b0:2d:48:5a:25 [ 12.069554] clm path from default:/lib/firmware/brcm/bcmdhd.clm_blob [ 12.069595] Skipping the clm download. len:0 memblk: (null) [ 12.074062] dhd_preinit_ioctls pspretend_threshold for HostAPD failed -23 [ 12.081788] Firmware version = wl0: Jul 21 2020 16:35:45 version 7.35.349.94 (r726700 CY) FWID 01-aa356e32 [ 12.085050] dhd_interworking_enable: failed to set WNM info, ret=-23 [ 12.168560] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 12.229403] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 12.492263] Bridge firewalling registered [ 12.496819] CFGP2P-ERROR) wl_cfgp2p_add_p2p_disc_if : [ 12.496820] P2P interface registered [ 12.510363] WLC_E_IF: NO_IF set, event Ignored [ 12.529254] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 12.603069] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 12.887658] tegra-usb-cd usb_cd: notification status (0x1, 0xa) [ 12.887662] tegra-usb-cd usb_cd: connected to non-standard charger [ 13.048554] Netfilter messages via NETLINK v0.30. [ 13.057113] ctnetlink v0.93: registering with nfnetlink. [ 13.302551] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 13.466884] tegradc 15210000.nvdisplay: unblank [ 14.450709] fuse init (API version 7.26) [ 16.299748] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 16.299759] Bluetooth: BNEP socket layer initialized [ 17.533498] tegradc 15210000.nvdisplay: unblank [ 37.976030] spmic-ldo0: disabling [ 37.976345] spmic-ldo1: disabling [ 37.976609] en-vdd-sd: disabling [ 37.976620] vdd-usb0-5v: disabling [ 37.976630] vdd-usb1-5v: disabling [ 37.976639] vdd-3v3: disabling [ 37.976649] en-vdd-vcm-2v8: disabling [ 37.976659] vdd-sys-bl: disabling